Used Slot Mortising Machine for sale (64,224)

Condition: ready for operation (used), Year of construction: 1960, machine/vehicle number: 719, Manufacturer: Hurth Model : LF 00 Machine No. : 719 Year of manufacture : ca.1960 Weight: ca. 400 KG General / technical data: used horizontal grooving milling machine with crank gear controlled groove length adjustment and automatic depth adjustment groove width for cutter Ø: from 2 to 10mm length of grooves in one cut: from 0 to 60mm + cutter diameter 10 depth feeds feeds: 0,03 to 0,3 mm milling feed: 8 speeds of the milling carriage by crank stroke: 5,1 / 7,3 / 10,2 / 13,9 / 18,4 / 25,4 / 34,7 / 49,5 strokes/min Cjdpfjg Uq Dfex Afnjgn spindle speeds: 4 pieces 970, 1370, 1950, and 2750 rpm table dimensions (rigid table): 160mm x 355mm table height adjustment: 40mm transversal movement of the table ( against the cutter ): 110mm power supply / spindle motor power: 380Volt 50 HZ / 0,8 KW / 920 1/min approx. space requirement of the machine: 670mm x 1100mm x 1200mm (bxtxh) Accessories / special equipment: Chip tray coolant device Machine documentation Remarks: The machine is in a condition corresponding to its age. The machine is preferably designed for production use in small and medium series. The machine has a simple crank gear adjustment to determine the length of the groove.

Condition: used, Year of construction: 1970, max. ram stroke 250 mm throat 250 mm table diameter 350 mm Cgsdpfx Afoxu Nq Sjnen long. travel of table 200 mm cross travel of table 500 mm distance table - lower edge of ram 300 mm double strokes/min. 15 - 160 /min total power requirement 1,7 kW weight of the machine ca. 1,7 t

Condition: good (used), Year of construction: 1956, Slotting machine, slotting machine, high-speed planer, keyseating machine, keyway broaching machine, keyway broaching machine, keyway tool, broaching machine, slotting machine, horizontal slotting machine, planing machine, power high-speed planer -Manufacturer: Lange & Geilen, horizontal slotting machine Kraft-Schnellhobler Cgedpfx Aolzmxyefnsn -Stroke: 350mm -Stroke rate: 20 - 110 1/min -Clamping table: 380 x 280 mm -Travel: X 410 mm Z 320 mm -T-Slot: 14mm -Propulsion: AEG 3 kW -Dimensions: 1460/1170/H1350 mm -Weight: 1140 kg

Condition: good (used), Slotting machine, slotting machine, high-speed planer, keywayseating machine, keyways slotting machine, keyways slotting tool, broaching machine, slotting machine, horizontal slotting machine, planing machine, high-power high-speed planer, metal planer/slotting machine -Manufacturer: Klopp, horizontal slotting machine, power planer type DP AP -Stroke: 525 mm -Stroke rate: 16 - 164 1/min -Travel: X 500 mm Z 290 mm -Drive: 2.2 kW -Dimensions: 1810/1160/H1420 mm -Weight: 1130 kg Csdpfx Afowck I Donjgn

Condition: excellent (used), HOLZMANN long hole drilling machine with movable table and 32 mm indexing, table additionally tiltable. Cgedpsx Rbk Esfx Afnon

Condition: good (used), functionality: fully functional, Chain mortiser – chain router in good, immediately usable condition. Accessories: various guide bars, chains, and sprockets. The chain mortiser is sold as described and as shown in the pictures, without any additional accessories. Cedpfjx Tqicsx Afnjgn

Condition: new, Centauro ALFA NC Machining Centre For Joinery Components & Doors A versatile and flexible NC controlled machining centre suitable for a variety of machining operations including hinge recessing, lock slots, handle holes, key slots and euro grooves etc. Programming is extremely simple thanks to the colour graphic touch screen controller using pre-installed electronic macros. As standard the machine can be equipped with one milling head that automatically moves for either vertical or horizontal machining. It also has interpolation of the axis. Optional additional machining operations include producing a square corner hinge plate recess or lock face recess by means of the additional milling unit. The operator simply selects in the program if they want a radius or square corner and the machine does the rest. In addition the same milling head can be used to make the small pilot hole for hinge screws etc. There is also the possibility to produce a square end tenon, round end tenon or dovetail / dovetail slot when the special front table is fitted. Lastly on request the machine can be configured to import ISO files from external design software (e.g ARTCAM Express) to enable detailed engraving of items such as name plates etc. Axis capacity - X 2800mm, Y 180mm, Z 150mm. (2400mm X capacity when optional drilling head fitted). Cgsdpfx Asb Tmngsfnjn 1 x ER32 collet for milling cutter 16mm max. dia. Max working table dimensions - 3000x618mm X axis positioning speed 35m/min. Y axis / Z axis positioning speed 6m/min. Retractable pneumatic positioning stops 2 off - on front of table Adjustable pneumatic workpiece clamps x 3 - mounted on rear of table. Left hand side ref. stop. Front table extension supports x 2 Router motor power 3.3kw. Router motor RPM 0-18,000 rpm. Touch screen controller - Elco Power 1000. Dust extraction outlet x 1 80mm dia, 2 x 100mm dia CE side and rear safety guards with front light curtain.

Condition: used, Year of construction: 1990, Dowel hole drilling unit: Pitch 16, 22, 25, 32 Drilling depth: 145 mm Slot length: 240 mm Height adjustment range: 135 mm Motor power: 1.5 kW Speed: 2800 rpm Hold-down device: manual Extraction port: 100 mm Machine length: 1280 mm Machine width: 960 mm Cgedpfex I Aikox Afnon Weight: 300 kg

Condition: used, Year of construction: 1994, Dowel hole drilling unit: spacing 16, 22, 25, 32 Drilling depth: 145 mm Slot length: 240 mm Height adjustment travel: 135 mm Motor power: 1.5 kW Speed: 2800 rpm Hold-down clamp: manual Cedpox I Aiqsfx Afnogn Machine length: 1280 mm Machine width: 960 mm Weight: 300 kg

Condition: good (used), functionality: fully functional, Lathe Emco Super 11 CD. 380V 3-speed, 2-stage motor, smooth operation. Spindle drive with gearbox, gears running in oil bath. Cedpfxsyalrks Afnsgn 8 spindle speeds adjustable from 55 to 2200 rpm. Norton gearbox for easy thread cutting. Automatic longitudinal and cross feed. Tailstock MK2. Coolant pump located at the rear of the base cabinet. Chuck safety guard. Quick-change tool post. Distance between centers: 650 mm Center height: 140 mm Spindle bore: 35 mm

Condition: used, Universal milling machine table, angle table, setup angle, clamping table, presumed MAHO make T-slot table, add-on table for universal tool milling machine Table no.: 76-400-1 / 2210 05 00 Table size: 700 x 330 mm Overall height: 210 mm Codpfxjxy Styo Afnogn T-slot width: 12 mm T-slot pitch: 45 mm - Table plate with 7x T-slots, 12 mm each - Mounting surface 90°, 13 mm diameter holes, 14 mm elongated holes for fastening and 12 mm guide slot - Hole spacing, top mounting plate Ø 13 mm = 500 mm, 50 mm from the table surface (measured at center) - Hole spacing, middle mounting plate Ø 13 mm = 472 mm, 95 mm from the table surface (measured at center) - Elongated hole spacing, middle mounting plate = 475 mm, 140 mm from the table surface (measured at center) - Elongated hole spacing, bottom mounting plate = 475 mm, 185 mm from the table surface (measured at center) Dimensions (L x W x H): 820 x 330 x 210 mm Weight: 61 kg In good condition

Condition: used, Year of construction: 2005, devel device: Teilung 16, 22 25, 32 boring depht: 145 mm boring length: 240 mm height adjustment: 135 mm motor power: 1,5kW speed: 1500 / 3000 U/min hold down: manuell suction connection: 100 mm machine length: 1280 mm machine width: 960 mm Cgsdpfjw Dd N Rsx Afnon weight: 300 kg

Condition: used, Year of construction: 1988, dowel hole drill device: division 16, 22 25, 32 max depth of the slot: 145 mm max length of the slot: 240 mm height adjustment: 135 mm Cedpeqx Ig Ajfx Afnjgn motor power: 1,5kW speed: 2800 U/min suction connection: 100 mm machine length: 1280 mm machine width: 960 mm weight: 300 kg

Condition: used, Year of construction: 2023, Used machine Year of manufacture: 2023 Condition: as new, only a few drillings performed Equipment and technical data: Spindle speed: 3,000 rpm Drilling width: 240 mm Max. drilling depth at 90°: 180 mm Drill head height adjustment: 160 mm Tool clamping range: 0 – 20 mm Worktable rotation: ±60° Worktable length: 565 mm Worktable width: 315 mm Extraction port diameter: 90 mm Output power: 2.2 kW Connection voltage: 400 V Mains frequency: 50 Hz Dimensions: 1,290 × 980 × 1,270 mm Weight: 260 kg Cjdpfx Afow E Tz Esnjgn Availability: short-term Location: Saxony-Anhalt

Condition: used, Year of construction: 2004, Drill chuck: Two-jaw chuck; Speeds: 2800 rpm; Drilling stroke: 200 mm; Max. drilling depth: 150 mm; Operation: Single-handed; Height adjustment: manual; Clamping cylinder: 1 pc; Clamping cylinder activation: Hand-operated eccentric; Version: movable drill head; Drill head tiltable: Yes; Table width: 630 mm; Table depth: 285 mm; Weight approx.: 240 kg; Motor power: 2.2 kW; Extraction diameter: 80 mm Location: Customer Cgodpfx Afsxbiu Renen

Condition: used, Year of construction: 2024, Slot drilling machine with rotating table • Drilling unit rotatable • 2 eccentric clamps • Height display • Mechanical dowel boring device (16-22-25-32 mm hole spacing) • 2 speeds: 1440 / 2880 rpm • Motor power 1.5 kW 1.1 Working table mm 800x400 1.2 Motor kW 1.5 1.3 Spindle speed rpm 2880 1.4 Max. slot height above table mm 160 1.5 Max. longitudinal traverse mm 345 1.6 Max. lateral traverse mm 245 1.7 Spindle stroke mm 160 1.8 Tool clamping diameter mm 0-20 1.9 Max. tool length mm 175 1.10 Number of eccentric clamps 1 1.11 Longitudinal tilt table angle ° 1.12 Spindle rotation ° 1.13 Table rotation ° +/- 45° 1.14 Machine dimensions mm 1500x1100x950 1.15 Machine weight kg 345 P 41 55 Extraction connection 1 P 41 25 2nd eccentric clamp 1 P 41 20 Mechanical dowel boring device 1 P41 07 2-speed motor 1.5/1.9kW 1440/2880 rpm P41 34 Mechanical numeric spindle height measurement Location: Cjdpfx Aewd U U Djfnegn

Condition: good (used), Hello, For sale: Slotting Machine type HOV-2S. The machine is operational and in continuous use; inspection and testing are possible. The price listed in the advertisement is net and VAT must be added. Cgjdjxyi Saepfx Afnsn The machine can be viewed in Starachowice at 13 Kwiatkowskiego Street. Telephone contact from 7:00 to 16:00.

Condition: used, Vertical Slotting Machine GSP type MORT 730 3-jaws chuck Ø 250 mm Slide travel: 170 mm Throat heigth: 300 mm Cgedpfx Afsx Ei Rcjnon Throat depth: 450 mm Swivel head +/- 30° Axes: X auto / Y manual Table Ø 500 mm Table: Manual Rotation Feeds: from 0 to 1,2 mm/stroke Strokes/min.: 31, 50 or 79 strokes/min. Vernier Graduation: 1 division = 0,1 mm Voltage: 380 V Width: 1400 mm Depth: 2100 mm Total height: 2100 mm Weight: approx 1,5 T

Condition: like new (used), Year of construction: 2018, machine/vehicle number: DC-2075, Work table 700 x 300 mm, drilling width 240 mm, drilling depth 150 mm, max. travel 230 mm, drill head height adjustment 160 mm, drill head swivel 45°-0°-45°, Wescott drill chuck 0 - 20 mm, speed 3,000 rpm, motor 2.2 kW, 400 volts, 50 Hz., weight approx. 345 kg, from the Seevetal location, without transport, as seen, Csdpfx Aovl Eynofnegn subject to prior sale.

Condition: new, Year of construction: 2024, machine/vehicle number: 2209, height adjustment type: mechanical, --- the 'new' own brand of: HoKuTech GmbH & Co. KG --- Slot Mortising Machine VD 20 R Motor 1.5/1.9 kW, Lateral travel in Y-axis 250 mm, Longitudinal travel in X 340 mm, Vertical travel in Z-axis 200 mm, 2 speeds 1,440 and 2,880 rpm. One-hand dowel boring device with divisions 16 - 22 - 25 - 32 mm, 2 manual eccentric clamps, manual digital display for drill height, Table dimensions 700 x 400 mm, Drill chuck max. D = 20 mm, Table rotatable +/- 45°, Codpfxsrxcyls Afnjgn Weight approx. 345 kg available immediately from stock Seevetal, subject to prior sale,

Condition: excellent (used), Drill Pade Cgsdpfottlbgox Afnsn Model: 3L MATIC

Condition: excellent (used), Single-sided oscillating drilling machine BACCI MOA One drilling unit Oscillation range up to 120 mm Tool rotation speed: 9500 rpm Maximum drilling depth: 80 mm Cgodpfx Asx Ih Ryofnen Manual table height adjustment up/down Table angle adjustment +/- 20° Main motor power: 2.2 kW

Condition: used, functionality: fully functional, number of spindles: 6, SECOND-HAND DRILLING/MORTISING MACHINE FOR RUSTICAL CHAIRS COMEC MOD. FM/SR 4+2 Cgodpfex Rchljx Afnjn

Condition: new, Year of construction: 2025, CORMAK PBM290 horizontal drilling machine is a professional device created for efficient wood machining. It is equipped with advanced solutions ensuring perfect quality of finished products. Machine features high-quality guides, providing easy table height adjustment easy one-handed usage due to a well-placed handle simple and smooth table movement left/right spindle rotation 100 mm diameter extracting connector Table dimensions 500 x 200 mm Drilling table height 760–900 mm Maximum drilling width 300 mm Maximum drilling depth Cgsdpfxsvuq Dks Afnsn 140 mm Spindle speed 2850 rpm Drilling chuck 0–16 mm S1 continuous work motor power 2.2 kW Power supply 400V Dimensions 770 x 920 x 1245 mm Weight 102 kg

Condition: new, Year of construction: 2025, CORMAK PLBM290 horizontal drilling machine is a professional solution for efficient wood machining. Equipped with advanced features ensuring proper machining quality. Machine features accurate drilling achieved by a bilaterally tilted drilling unit four-level head (16-20-22-25 mm) 2 limiting switches left/right spindle rotation simple, one-handed handling 100 mm diameter extracting connector Technical data Table dimensions 570x300 mm Table extension 600x300 mm Drilling table height 810 mm Drilling depth 155 mm Drilling width adjustment 300 mm Height adjustment 160 mm Spindle speed 1400 / 2800 rpm S1 continuous work motor power 3.8 kW Power supply 400V Extracting connector diameter 100 mm Two-jaw chuck 0-20 mm Cedpsvuq Hlefx Afnogn Dimensions 570x850x1340 mm Weight 140 kg