Used Slide Sanding for sale (9,999)

Condition: used, Year of construction: 1983, Used machine Pedpfx Ajy Dkhgsdzsra Year of manufacture: 1983 Equipment and technical data: with 2 combination units with 2 contact rollers, 1 x 65° Shore, 1 x 85° Shore and 2 air sanding shoes Sanding width 1350 mm Sanding belt dimensions 1360 x 1900 mm Workpiece thickness max. 150 mm 1st unit with 15 kW 2nd unit with 15 kW Cleaning brush Roller table at the infeed Roller table at the outfeed Infinitely variable feed rate from 2.5 to 12.5 m/min Weight approx. 3700 kg Availability: short-term Location: Flörsheim

Year of construction: 2017, condition: used, Used overhead crane system with vacuum lifting device Year of manufacture: 2017 Load capacity: 250 kg (at the lifting device) Crane travel: 6 m Bridge: 6 m Vacuum lifting device B 3 UW H K 250 V with 2 oval suction cups 500 x 2500 mm Vacuum generation: pneumatic with ejector Operating pressure: 7 bar filtered compressed air required Air consumption: approx. 7 NL/sec. with ABM electric chain hoist Lifting speed: 0...10 m/min, infinitely variable Operation via special handle on the vacuum lifting device. Psdpfx Adezc Agdozsra The lifting movement is controlled infinitely variable via a frequency converter. Availability: short notice Storage location: Flörsheim

Condition: good (used), Year of construction: 2005, functionality: fully functional, total width: 2,000 mm, total length: 1,650 mm, total height: 3,500 mm, input voltage: 400 V, overall weight: 3,054 kg, We are offering this used Tilghman Wheelabrator T170 sandblasting machine, manufactured in 2005, for sale. It is in good condition. - Integrated dust extraction system - Year of manufacture: 2005 - Model T:170 - Manufactured in the UK - Maximum load: 225 kg - Blasting chamber dimensions: 750 x 930 mm Podpfszl Sifsx Adzora - Turbine: 7.5 kW - Weight: 3054 kg - Overall dimensions: 1650 x 2000 x 3500 mm - Power supply: 400V, 26A - Wheelabrator still provides spare parts and service for these machines. If you have any questions or would like more information, please do not hesitate to send us a message or call us.

Condition: good (used), functionality: fully functional, mileage: 319,000 km, first registration: 07/1997, fuel type: diesel, overall weight: 6,000 kg, fuel: diesel, number of gears: 5, number of seats: 7, Year of construction: 1997, Equipment: cable winch, recovery vehicle with a slide-on platform, crane, and winch... everything in good working order... platform by Falkom... vehicle runs perfectly... 4.2-liter engine with a dual battery... Pedpfx Adjy Ti T Tezora

Condition: like new (used), Year of construction: 2022, functionality: fully functional, power: 2.21 kW (3.00 HP), input voltage: 400 V, input current: 19 A, input frequency: 50 Hz, type of input current: three-phase, cutting height (max.): 140 mm, cutting width (max.): 1,270 mm, saw blade diameter: 400 mm, tilt adjustment saw blade: 45 °, height adjustment type: mechanical, saw blade bore: 30 mm, actuation type: electric, rotational speed (max.): 3,700 rpm, total length: 3,200 mm, total width: 5,155 mm, total height: 1,550 mm, overall weight: 691 kg, table height: 900 mm, Equipment: CE marking, documentation/manual, saw blade guard, Year of manufacture: 2022 9 kW motor Prjdoy Shx Sepfx Adzea Scoring unit Panel processing up to 3.2 m length Squaring fence with 2 digital readouts Parallel fence with 1 digital readout Excellent condition

Condition: good (used), Tool trolley, workshop trolley, transport trolley, table trolley, sliding trolley, material trolley -Material trolley: 2 pieces with swivel casters, used for EHT guillotine shear -Car1: 1100/1010/H530 mm weight 67 kg -Car 2: 1400/1050/H390 mm Weight 107 kg Prodpfx Ajyz R E Hedzoa -Swivel casters: 4 each -Submission/Price: complete -Transport dimensions: 1400/1105/H700 mm -Weight: 174 kg

Condition: excellent (used), Machine suitable for the polishing and the cleaning process (top & bottom) of panels. - Upper cleaning system (with 2 motorized rubbered cross belts with brushes) Prsdpfx Adsyw Rpqszja Motor power: Kw 0.19 - Lower cleaning system (with 2 motorized rubbered cross belts with brushes) Motor power: Kw 0.19 - Max working width mm 1500 ca.

Year of construction: 2011, condition: used, functionality: fully functional, MACHINING CAPACITIES: - Height (thickness): 30 to 390 mm - Maximum workpiece width: 400 mm - Abrasive belt speed: 1300 m/min - Conveyor feed speed: 10 m/min - Belt dimensions: 420x1800 mm (consult us for supply) MACHINE CONFIGURATION: - Roller table, belt operates from below Table height from floor: 90 cm - Automatic workpiece detection by sensor - Sanding pad with pneumatic pressure - Automatic belt rotation direction change MACHINE FEATURES: - Main power supply: 400V, 3-phase, 50Hz, IN 22A (35A protection) - Automatic star-delta starter - Ammeter(s) for power consumption monitoring Feed motor: 0.5 kW Belt motor: 7.5 kW - Pneumatic tensioning, oscillation, and disengagement of rollers Prsdex A Unxspfx Adzea - Pneumatic supply: 6 to 8 bar - Extraction: 2 lower ports Ø150 mm Recommended airflow: 2200 m³/h Speed: 20 m/sec - CE marking, emergency stops front and rear, lockable isolator switch Note: For your satisfaction, we remind you that belts should be released when the machine is not in use and that all humidity, including dew point inside your workshop in winter, must be avoided. Dimensions: 1500x1300x2050 mm (H) Weight: 1200 kg

Condition: excellent (used), Year of construction: 2006, I sell the widebelt sanding machine SCM Sandya 7 S 110 Year 2006. Psdpfoxtxhkjx Adzora Configuration: 11 KW steel cylinder 11 KW hard rubber cylinder soft rubber cylinder Working width 1100mm Pressure rollers for short elements. Air-blow on all units. Total weight 2400kg 2 motors 11 + 11 kW Including full documentation. Condition LIKE NEW ! The machine was working only a few. Available immediately.

Condition: used, Stainless steel knife gate valve Prjdjx Nykbepfx Adzja Diameter 150 mm Made entirely of stainless steel 2 units in stock See our other listings VMA Wekerom

Condition: ready for operation (used), Year of construction: 2018, functionality: fully functional, turning length: 380 mm, turning diameter: 165 mm, spindle speed (max.): 5,000 rpm, bar passage: 51 mm, controller model: Mitsubishi MELDAS, Machine in very good condition, fully functional both electrically and mechanically! Prjdpoyvfvbjfx Adzja TECHNICAL DETAILS Maximum bar capacity: 51 mm Maximum turning diameter: 165 mm Maximum turning length: 380 mm Maximum main spindle speed: 5,000 rpm Maximum sub spindle speed: 5,000 rpm Tool turret Number of tool turrets: 2 Positions per turret: 12 Driven tools possible MACHINE DETAILS Control: Mitsubishi MELDAS Machine weight: 8,000 kg EQUIPMENT Y-axis Simultaneous machining possible High rigidity and process reliability Complete technical documentation available

Condition: used, Year of construction: 2008, functionality: fully functional, machine/vehicle number: 101780, total length: 4,300 mm, total width: 720 mm, total height: 1,390 mm, type of input current: three-phase, input voltage: 400 V, feed rate X-axis: 6 m/min, power: 8.4 kW (11.42 HP), We offer this used Rehnen KBA edge sanding machine, year of construction 2008. Prodpfxoyvfwro Adzsa Manufacturer: Rehnen Model: KBA Year of Construction: 2008 Condition: used Category ID: 826 Type ID: 94 Type: edge sanding machine Aggregates total: 5 Moulding aggregates: 2 Sanding aggregates: 3 Workpiece width min mm: 60 Workpiece thickness max mm: 90 Feedrate max m/min: 6 Aggregates oscillating: Yes Sanding belt: Yes Profile sanding pad: Yes Milling aggregate vertically scanning: Yes Stepless rotational speed control: Yes Clamping system: Upper pressure rolls Jump-in control: pneumatic CE marking: Yes Total connection kW 6,50 Required space LxWxH mm 4300x720x1390 Availability short-term, ex location customer! If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: used, Altendorf C45 Panel Saw with Sliding Table Scoring unit 0.75 kW, electrically adjustable up/down Sliding table 320 cm Max cutting width at rip fence on the right side: 130 cm Tilting 0-45°, manually adjustable Saw blade height adjustable manually Motor power 4 kW Max saw blade diameter 315 mm Duplex angle fence included Prodpfx Adjyt Ibbezsa The machine has been inspected, still holds accuracy and angles, and is fully functional

Condition: like new (used), Compressor, rotary vane compressor, low-pressure gas compressor, gas compressor, Ro-Flo 219M Podoylh Npepfx Adzsra Manufacturer: Ro-Flo Compressors, LLC Type: 219M Serial number: 10568-4 -inlet pressure: 2.3 bar (gauge) -maximum pressure: 7.7 bar (gauge) -volumetric flow rate: 955.8 m³/h -operating speed: 275–640 rpm -maximum operating temperature: 176 °C -overall dimensions: 1450 × 690 × 850 mm -weight: approx. 1,341 kg

Condition: ready for operation (used), Working width 1100 mm Roller unit Table adjustment Prsdpfxeylv Ero Adzoa The rubber roller is worn at one spot!! Further details on request

Condition: repair required (used), Year of construction: 1996, MACHINING CAPACITIES: - Height (thickness): 3 to 160 mm - Maximum workpiece width: 1100 mm - Minimum workpiece length: 390 mm - Abrasive belt speed: 18 m/s - Conveyor feed speed: 4.5 – 9 m/min - Suitable belt dimensions: 2150 x 1115 mm MACHINE CONFIGURATION: - 4 infeed rollers and 4 outfeed rollers - Table positioning with sensor - Vacuum conveyor system (perforated belt and motorized fan) - Pneumatic foot switch 1) Calibration 2) Calibration / sanding 3) Finishing sanding MACHINE SPECIFICATIONS: - Main power supply: 400V, three-phase, 50Hz - Automatic star-delta starter - Ammeter(s) for power consumption monitoring - Pneumatic tensioning, oscillation, and retraction of rollers - Pneumatic supply, working pressure: 6 bar - Dust extraction, 3 upper ports, Ø mm Recommended air flow: 2500 m³/h per hood Pjdoy I Srzopfx Adzora Note: For optimal performance, please ensure that sanding belts are released when the machine is not in use, and avoid any moisture, including condensation, inside your facility during winter. Machine dimensions: 1920 x 2050 x h.2240 mm

Condition: used, used, top condition Machine cleaned and lubricated Partially overhauled. Emergency stop button renewed. All sliding pads replaced Motor cover repaired. Oscillation overhauled and adjusted. Test run conducted Psdpfxey H N Tmo Adzjra Manufacturer: SCM Samco Model: Unilev 15 Machine No.: 98510909050 Motor: 2.2 / 3 kW Oscillation: pneumatic, infinitely variable Veneer edge sanding unit Front table approx. 1400 x 220 mm Rear table approx. 1440 x 220 mm Tilting table double-sided Belt tension pneumatic Belt length 2170 mm Belt width 150 mm 2 belt speeds: 10 / 20 m/sec mobile Round edge sanding device with support table approx. 500 x 400 mm Extraction connection D 120 mm Required space approx. 1500 x 750 x 1400 mm Weight approx. 490 kg Storage location: 97447 Gerolzhofen, free loaded, unpacked Delivery in as-inspected condition, without warranty or guarantee

Condition: used, maximum load weight: 30,920 kg, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 05/2017, next inspection (TÜV): 01/2027, Equipment: ABS, * Schmitz 3-axle aluminum tipper approx. 26 m³ * SKL 24 SL 7.2 * Lifting axle * Disc brakes * Air suspension * Ride height control * Platform Pedpfx Aey Arpcjdzera * Okuslide * Sliding tarpaulin * Schmitz axles * MOT 01/27-SP 07/26 * Unladen weight 5030 kg

Condition: used, functionality: fully functional, Samco Unilev 15 Edge Sander Belt dimensions 150 x 2170 mm Two belt speeds Adjustable shoe Tabletop adjustable at an angle of 0-30 degrees Adjustable grinding height Pneumatic sanding belt tension Prodpfx Aeycpz Usdzea Sanding belt oscillation Motor power 3kw

Condition: excellent (used), mileage: 508,000 km, power: 350 kW (475.87 HP), first registration: 10/2018, fuel type: diesel, tire size: 385/55 R22.5 156/-- G: 22.5x11.75, axle configuration: 6x2, wheelbase: 65,500 mm, fuel: diesel, color: other, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, total length: 1,050 mm, permissible axle load (axle 1): 8,000 kg, permissible axle load (axle 2): 11,500 kg, permissible axle load (axle 3): 7,500 kg, Year of construction: 2018, Equipment: ABS, AdBlue, Bluetooth, air conditioning, central locking, crane, cruise control, electric window regulation, electronic stability program (ESP), fog lights, parking heater, = Additional Options and Equipment = - 12 Volt socket - Airbag - EURO 6 - Speed limiter - Cup holder - Keyless start/go - Radio - Sleeper cab - Sun visor - Lane departure warning system - Auxiliary heater - Tachometer = Further Information = Technical Information Number of cylinders: 4 Engine displacement: 12,809 cc Axle Configuration Front axle: Tyre size: 385/55 R22.5 156/-- G: 22.5x11.75; Max. axle load: 8,000 kg; Steered Rear axle 1: Tyre size: 315/70 R; Twin tires; Max. axle load: 11,500 kg Rear axle 2: Max. axle load: 7,500 kg Weights Prsdpfx Aex N Sazedzja Unladen weight: 9,576 kg Payload: 16,424 kg Gross vehicle weight: 26,000 kg Functionality Lifting capacity: 10,000 kg Lifting height: 2,400 cm Crane: Palfinger PK 34002 SH, year 2018, mounted at the rear of the chassis Sliding roof: Yes Maintenance APK (Technical Inspection): New TÜV upon delivery Condition Technical condition: very good Visual condition: very good Damages: none

Condition: good (used), An electric bi-parting sliding gate is being offered. Hot-dip galvanized. Year of manufacture: approx. 2005. Dimensions: Total length of both leaves: 16.60 m. Gate opening: 12.00 m. Height: 1.20 m. Complete with drive units. Prjdpjx N Ta Nefx Adzja Includes 4 fence panels: length 2.60 m x height 0.90 m.

Condition: excellent (used), Year of construction: 1984, Description to follow! Prodpfx Adszbczlozja

Condition: new, functionality: fully functional, Year of construction: 2026, Vertical Shaft Impact Crushers (VSI) stand out among rock crushing machines due to their high crushing efficiency and excellent particle shape production. Developed by CONSTMACH, these sand-making machines are used in the tertiary crushing stage to give cubic form to materials obtained from secondary crushers and to produce a high proportion of fine material. The system offers superior performance in processing all types of minerals and ores, as well as hard rocks such as basalt and granite. High-quality sand is produced from materials with a maximum feed size of 45 mm. Vertical shaft impact crushers allow you to easily obtain the desired product size for different material types thanks to their variable speed rotor system. It offers production capacity flexibility with a high reduction ratio, large feed hopper, and four different crushing chambers. In addition, high-chromium wheel shoes, anvils, and heavy-duty bearings ensure long life and low maintenance costs. The independent lubrication system and optional anvil replacement mechanism maximize uptime. Vertical Shaft Impact Crusher Technical Specifications Model: VSI-700-CR Maximum Feed Size: 35 mm Weight: 6,500 kg Motor Power: 110 kW Rotor Diameter: Ø700 mm Rotor Speed: 60–70 m/s Production Capacity: 60–100 t/h Model: VSI-800-CR Maximum Feed Size: 40 mm Weight: 12,000 kg Podpfx Adoxqgyvozjra Motor Power: 2 x 160 kW Rotor Diameter: Ø800 mm Rotor Speed: 45–60 m/s Production Capacity: 150–200 t/h Model: VSI-900-CR Maximum Feed Size: 45 mm Weight: 14,500 kg Motor Power: 2 x 185 kW Rotor Diameter: Ø900 mm Rotor Speed: 50–60 m/s Production Capacity: 200–250 t/h Model: VSI-1000-OR Maximum Feed Size: 90 mm Weight: 15,000 kg Motor Power: 2 x 200 kW Rotor Diameter: Ø975 mm Rotor Speed: 50–60 m/s Production Capacity: 250–300 t/h Why Choose CONSTMACH Vertical Shaft Impact Crushers? CONSTMACH is a globally preferred brand in the production of stone crushing machines and sand making machines with its engineering quality. Our vertical shaft impact crushers offer high performance, low operating costs, and long-lasting use. Our models, which can be customized to the production needs of each facility, provide the advantages of easy maintenance and high efficiency. CONSTMACH is always the right choice for businesses seeking quality, reliability, and sustainable production. What Do We Do at Constmach? Constmach is a leading machine manufacturer serving the construction and mining industries with a wide range of products. Our product portfolio includes concrete block making machines, stationary and mobile concrete plants, stone crushing machines, stone crushing and screening plants, sand washing machines, sand making machines, asphalt plants, conveyor belt systems, jaw crushers, and mobile crushing plants. With its high quality standards, innovative production approach, and customer-focused solutions, Constmach stands out as a reliable brand in both national and international markets. Our products continue to be the preferred choice of industry professionals due to their durability, efficiency, and long-lasting performance.

Condition: new, -Continuously adjustable sanding unit (0 - 90°) for vertical and horizontal sanding -Oscillating sanding belt for better sanding results and a longer service life of the sanding belt -Quick and easy sanding belt change via Prsdsvxkv Uepfx Adzea quick-clamping system -Grinding sole with graphite coating as standard for a longer service life of the sanding belt -Work table made of gray cast iron adjustable via handwheel with T-slot -Including side sanding sleeve device for sanding curves and radii -Two suction nozzles Ø 100 mm -1x sanding belt 2750x 150mm grain 80 -1x sanding sleeve Ø38mm grain 80 -1x sanding sleeve Ø50mm grain 80 -1x sanding sleeve Ø75mm grain 80 Dimensions and weights: - Length (product) approx.: 1515 mm - Width/depth (product) approx.: 550 mm - Height (product) approx.: 1150 mm - Weight (net) approx.: 207 kg Extraction connection: - Extraction nozzle diameter: 100 mm Work table(s): - Work table length: 900 mm - Work table width: 305 mm - Work table height adjustment: 120 mm Electrical data: - Connection voltage: 400 V - Mains frequency: 50 Hz Grinding unit: - Sanding belt length: 2750 mm - Sanding belt width: 150 mm - Belt rotation speed(s): 16 m/s - Oscillation stroke: 15 mm - Sanding surface length: 1010 mm - Sanding surface width: 190 mm - Sanding height max.: 170 mm - Sanding unit swivel: 0 – 90 ° Workpiece: - Workpiece width max.: 1010 mm - Workpiece height max.: 150 mm - new exhibition machine -

Condition: new, Edge sanding machine HOLZKRAFT KSO 200 F Podpju R S Erofx Adzsra - Exhibition machine - Relief rollers on the fence rulers, with swiveling sanding unit, and oscillating sanding belt, Veneer sanding device, Oscillation with separate motor, height-adjustable sanding table, extendable roller table extension, rubberized sanding drum ----- Technical data ----- Sanding belt dimensions: 3,000 x 200 mm, Work table dimensions: 960 x 350 mm, Work table height adjustment: 230 mm, Sanding surface: 1,050 x 300 mm, Belt speed: 20 m/sec, Oscillation stroke: 20 mm, Suction nozzle Ø: 140 mm, Motor 400 V: 4.0 HP / 3.0 kW, Dimensions (LxWxH): 1,900 x 900 x 1,350 mm, Weight: 290 kg - new exhibition machine -