Used Slide Sanding for sale (9,990)

Condition: used, Year of construction: 2008, functionality: fully functional, machine/vehicle number: 101780, total length: 4,300 mm, total width: 720 mm, total height: 1,390 mm, type of input current: three-phase, input voltage: 400 V, feed rate X-axis: 6 m/min, power: 8.4 kW (11.42 HP), We offer this used Rehnen KBA edge sanding machine, year of construction 2008. Manufacturer: Rehnen Model: KBA Year of Construction: 2008 Condition: used Category ID: 826 Type ID: 94 Type: edge sanding machine Aggregates total: 5 Moulding aggregates: 2 Sanding aggregates: 3 Workpiece width min mm: 60 Workpiece thickness max mm: 90 Feedrate max m/min: 6 Aggregates oscillating: Yes Sanding belt: Yes Profile sanding pad: Yes Milling aggregate vertically scanning: Yes Stepless rotational speed control: Yes Nodpfx Aqjyvfwrowjda Clamping system: Upper pressure rolls Jump-in control: pneumatic CE marking: Yes Total connection kW 6,50 Required space LxWxH mm 4300x720x1390 Availability short-term, ex location customer! If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: used, Altendorf C45 Panel Saw with Sliding Table Scoring unit 0.75 kW, electrically adjustable up/down Sliding table 320 cm Max cutting width at rip fence on the right side: 130 cm Tilting 0-45°, manually adjustable Saw blade height adjustable manually Motor power 4 kW Max saw blade diameter 315 mm Duplex angle fence included The machine has been inspected, still holds accuracy and angles, and is fully functional Ndodpfxjyt Ibbo Aqwoa

Condition: like new (used), Compressor, rotary vane compressor, low-pressure gas compressor, gas compressor, Ro-Flo 219M Njdpfx Aqeylh Npewjda Manufacturer: Ro-Flo Compressors, LLC Type: 219M Serial number: 10568-4 -inlet pressure: 2.3 bar (gauge) -maximum pressure: 7.7 bar (gauge) -volumetric flow rate: 955.8 m³/h -operating speed: 275–640 rpm -maximum operating temperature: 176 °C -overall dimensions: 1450 × 690 × 850 mm -weight: approx. 1,341 kg

Condition: used, used, top condition Machine cleaned and lubricated Partially overhauled. Emergency stop button renewed. All sliding pads replaced Motor cover repaired. Oscillation overhauled and adjusted. Test run conducted Manufacturer: SCM Samco Model: Unilev 15 Machine No.: 98510909050 Nedpfx Ajy H N Tmjqwoda Motor: 2.2 / 3 kW Oscillation: pneumatic, infinitely variable Veneer edge sanding unit Front table approx. 1400 x 220 mm Rear table approx. 1440 x 220 mm Tilting table double-sided Belt tension pneumatic Belt length 2170 mm Belt width 150 mm 2 belt speeds: 10 / 20 m/sec mobile Round edge sanding device with support table approx. 500 x 400 mm Extraction connection D 120 mm Required space approx. 1500 x 750 x 1400 mm Weight approx. 490 kg Storage location: 97447 Gerolzhofen, free loaded, unpacked Delivery in as-inspected condition, without warranty or guarantee

Condition: used, functionality: fully functional, Samco Unilev 15 Edge Sander Nodpfx Aqeycpz Uewoda Belt dimensions 150 x 2170 mm Two belt speeds Adjustable shoe Tabletop adjustable at an angle of 0-30 degrees Adjustable grinding height Pneumatic sanding belt tension Sanding belt oscillation Motor power 3kw

Condition: used, axle configuration: 3 axles, first registration: 11/2005, loading space length: 13,600 mm, loading space width: 2,470 mm, loading space height: 2,790 mm, total length: 13,900 mm, total width: 2,600 mm, total height: 4,000 mm, suspension: air, tire size: 385/65R22,5, color: other, Year of construction: 2005, Equipment: ABS, = Additional Options and Accessories = - EBS = Remarks = Number of axles: 3, Unladen weight: 7,580 kg, Gross weight: 39,000 kg, Chassis type: Complete chassis, Chassis material: Steel, Kingpin size: 2 inch, Suspension type: Full air suspension, ABS, EBS, Year of body construction: 2005, Sliding roof, Axle type: BPW = Further Information = General Information Cabin: Day cab Registration number: KLEYN1 Driveline Fuel type: Diesel Transmission Transmission: Manual gearbox Axle configuration Tyre size: 385/65R22.5 Brakes: Drum brakes Suspension: Air suspension Axle 1: Tyre tread left: 6 mm; Tyre tread right: 9 mm Axle 2: Tyre tread left: 5 mm; Tyre tread right: 6 mm Axle 3: Tyre tread left: 7 mm; Tyre tread right: 8 mm Weights Unladen weight: 7,580 kg Payload capacity: 31,420 kg Gross vehicle weight (GVW): 39,000 kg Ndodpfxex S Uzao Aqwoa Functional Sliding roof: Yes Environment Emission class: Euro 0 Maintenance APK (Dutch MOT-equivalent): valid until 09.2026 Condition Overall condition: average Technical condition: average Visual condition: average Damages: none = Company Information = Kleyn Trucks is one of the world’s largest independent dealers in used vehicles. Here you can choose from a constantly changing stock of 1,200 used trucks, tractor units, and trailers. Our inventory covers all European makes, model years, and price ranges. Why buy at Kleyn Trucks? Simple! • Large, fast-changing inventory • Recognized quality • Competitive pricing • Professional business practices • Multilingual staff • Customer-focused service • Assistance with import and transport • (Export) registration plates arranged quickly • Expert technical services • The safety of “recognizable quality” • And much more.... Visit our website for special offers and the complete inventory: Leasing via Kleyn Trucks is possible in most European countries! Calculate your lease rate quickly and send us a request via our website. Ask directly about our European warranty package.

Condition: excellent (used), mileage: 508,000 km, power: 350 kW (475.87 HP), first registration: 10/2018, fuel type: diesel, tire size: 385/55 R22.5 156/-- G: 22.5x11.75, axle configuration: 6x2, wheelbase: 65,500 mm, fuel: diesel, color: other, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, total length: 1,050 mm, permissible axle load (axle 1): 8,000 kg, permissible axle load (axle 2): 11,500 kg, permissible axle load (axle 3): 7,500 kg, Year of construction: 2018, Equipment: ABS, AdBlue, Bluetooth, air conditioning, central locking, crane, cruise control, electric window regulation, electronic stability program (ESP), fog lights, parking heater, = Additional Options and Equipment = - 12 Volt socket - Airbag - EURO 6 - Speed limiter - Cup holder - Keyless start/go - Radio - Sleeper cab - Sun visor - Lane departure warning system - Auxiliary heater - Tachometer = Further Information = Technical Information Number of cylinders: 4 Engine displacement: 12,809 cc Axle Configuration Front axle: Tyre size: 385/55 R22.5 156/-- G: 22.5x11.75; Max. axle load: 8,000 kg; Steered Rear axle 1: Tyre size: 315/70 R; Twin tires; Max. axle load: 11,500 kg Rear axle 2: Max. axle load: 7,500 kg Weights Unladen weight: 9,576 kg Payload: 16,424 kg Gross vehicle weight: 26,000 kg Functionality Lifting capacity: 10,000 kg Lifting height: 2,400 cm Crane: Palfinger PK 34002 SH, year 2018, mounted at the rear of the chassis Sliding roof: Yes Maintenance APK (Technical Inspection): New TÜV upon delivery Nsdpfx Aqox N Sazswjda Condition Technical condition: very good Visual condition: very good Damages: none

Condition: good (used), An electric bi-parting sliding gate is being offered. Hot-dip galvanized. Year of manufacture: approx. 2005. Dimensions: Ndodpsx N Ta Nsfx Aqwsa Total length of both leaves: 16.60 m. Gate opening: 12.00 m. Height: 1.20 m. Complete with drive units. Includes 4 fence panels: length 2.60 m x height 0.90 m.

Condition: excellent (used), Year of construction: 1984, Description to follow! Ndsdpfxjzbczle Aqwja

Condition: new, functionality: fully functional, Year of construction: 2026, Vertical Shaft Impact Crushers (VSI) stand out among rock crushing machines due to their high crushing efficiency and excellent particle shape production. Developed by CONSTMACH, these sand-making machines are used in the tertiary crushing stage to give cubic form to materials obtained from secondary crushers and to produce a high proportion of fine material. The system offers superior performance in processing all types of minerals and ores, as well as hard rocks such as basalt and granite. High-quality sand is produced from materials with a maximum feed size of 45 mm. Vertical shaft impact crushers allow you to easily obtain the desired product size for different material types thanks to their variable speed rotor system. It offers production capacity flexibility with a high reduction ratio, large feed hopper, and four different crushing chambers. In addition, high-chromium wheel shoes, anvils, and heavy-duty bearings ensure long life and low maintenance costs. The independent lubrication system and optional anvil replacement mechanism maximize uptime. Vertical Shaft Impact Crusher Technical Specifications Model: VSI-700-CR Maximum Feed Size: 35 mm Weight: 6,500 kg Motor Power: 110 kW Ndsdpfx Aqsxqgyvowea Rotor Diameter: Ø700 mm Rotor Speed: 60–70 m/s Production Capacity: 60–100 t/h Model: VSI-800-CR Maximum Feed Size: 40 mm Weight: 12,000 kg Motor Power: 2 x 160 kW Rotor Diameter: Ø800 mm Rotor Speed: 45–60 m/s Production Capacity: 150–200 t/h Model: VSI-900-CR Maximum Feed Size: 45 mm Weight: 14,500 kg Motor Power: 2 x 185 kW Rotor Diameter: Ø900 mm Rotor Speed: 50–60 m/s Production Capacity: 200–250 t/h Model: VSI-1000-OR Maximum Feed Size: 90 mm Weight: 15,000 kg Motor Power: 2 x 200 kW Rotor Diameter: Ø975 mm Rotor Speed: 50–60 m/s Production Capacity: 250–300 t/h Why Choose CONSTMACH Vertical Shaft Impact Crushers? CONSTMACH is a globally preferred brand in the production of stone crushing machines and sand making machines with its engineering quality. Our vertical shaft impact crushers offer high performance, low operating costs, and long-lasting use. Our models, which can be customized to the production needs of each facility, provide the advantages of easy maintenance and high efficiency. CONSTMACH is always the right choice for businesses seeking quality, reliability, and sustainable production. What Do We Do at Constmach? Constmach is a leading machine manufacturer serving the construction and mining industries with a wide range of products. Our product portfolio includes concrete block making machines, stationary and mobile concrete plants, stone crushing machines, stone crushing and screening plants, sand washing machines, sand making machines, asphalt plants, conveyor belt systems, jaw crushers, and mobile crushing plants. With its high quality standards, innovative production approach, and customer-focused solutions, Constmach stands out as a reliable brand in both national and international markets. Our products continue to be the preferred choice of industry professionals due to their durability, efficiency, and long-lasting performance.

Condition: new, -Continuously adjustable sanding unit (0 - 90°) for vertical and horizontal sanding -Oscillating sanding belt for better sanding results and a longer service life of the sanding belt -Quick and easy sanding belt change via quick-clamping system -Grinding sole with graphite coating as standard for a longer service life of the sanding belt -Work table made of gray cast iron adjustable via handwheel with T-slot -Including side sanding sleeve device for sanding curves and radii -Two suction nozzles Ø 100 mm -1x sanding belt 2750x 150mm grain 80 Nedpfx Aevxkv Uoqweda -1x sanding sleeve Ø38mm grain 80 -1x sanding sleeve Ø50mm grain 80 -1x sanding sleeve Ø75mm grain 80 Dimensions and weights: - Length (product) approx.: 1515 mm - Width/depth (product) approx.: 550 mm - Height (product) approx.: 1150 mm - Weight (net) approx.: 207 kg Extraction connection: - Extraction nozzle diameter: 100 mm Work table(s): - Work table length: 900 mm - Work table width: 305 mm - Work table height adjustment: 120 mm Electrical data: - Connection voltage: 400 V - Mains frequency: 50 Hz Grinding unit: - Sanding belt length: 2750 mm - Sanding belt width: 150 mm - Belt rotation speed(s): 16 m/s - Oscillation stroke: 15 mm - Sanding surface length: 1010 mm - Sanding surface width: 190 mm - Sanding height max.: 170 mm - Sanding unit swivel: 0 – 90 ° Workpiece: - Workpiece width max.: 1010 mm - Workpiece height max.: 150 mm - new exhibition machine -

Condition: new, Edge sanding machine HOLZKRAFT KSO 200 F - Exhibition machine - Relief rollers on the fence rulers, with swiveling sanding unit, and oscillating sanding belt, Nsdpfxeu R S Erj Aqwoda Veneer sanding device, Oscillation with separate motor, height-adjustable sanding table, extendable roller table extension, rubberized sanding drum ----- Technical data ----- Sanding belt dimensions: 3,000 x 200 mm, Work table dimensions: 960 x 350 mm, Work table height adjustment: 230 mm, Sanding surface: 1,050 x 300 mm, Belt speed: 20 m/sec, Oscillation stroke: 20 mm, Suction nozzle Ø: 140 mm, Motor 400 V: 4.0 HP / 3.0 kW, Dimensions (LxWxH): 1,900 x 900 x 1,350 mm, Weight: 290 kg - new exhibition machine -

Condition: used, Frame sanding machine LÖWER RSM 280 SX -used- Frame sanding machine sanding pad, oscillation, frame sanding device, feed belt, belt cleaning ----- Technical data ----- Sanding width: 190 mm, max. workpiece thickness: 120 mm, Speeds: 6,11,16 m/min, Motor: 5.5 kW, weight: 550 kg Nedpfx Aou R Tbhoqwoda

Condition: new, Number of sanding units 4 St. sanding width 190 mm Sanding height max. 180 mm LÖWER-DoubleSander Solid DSM 2004 ----- Double-sided four-belt single wood sander for Sanding solid wood such as window frames etc. Highly stable top design with innovative details. Suitable for high continuous loads even with higher chip removals. - sanding units arranged one after the other for pre-grinding, Fine sanding and finishing sanding, each from above and below 1. Belt sanding unit with heavy steel roller 2. Belt sanding unit with rubberized roller and shoe 3. Finishing unit with fiber brush - Directly driven grinding rollers for slip-free Power transmission - maintenance and wear-free CERMET-coated grinding wheels shoes with very good thermal conductivity and absolute Dimensional accuracy - External cooling of the grinding zones for cooler grinding and longer sanding belt service life - force-guided pneumatically controlled sanding belt oscillation - effective sanding dust extraction directly on the Grinding rollers - Airborne dust extraction on the tension rollers - Integrated brushing and finishing device with large Grinding dust extraction - motorized grinding thickness adjustment via precision threaded spindles and large-sized linear ball screws bearing sets on hardened and ground precision shafts with dust and dirt protection - Adjustment of the chip removal at the bottom via precision Threaded spindle with dimension display via scale ring (Resolution 0.1mm) - Sanding belt tension via pneumatic cylinder constant clamping pressure - Sanding belt change with pneumatic belt relaxation Within seconds - Adjustment option for the sanding belt run Ndjdpovnv Tqofx Aqwja Band change - electro-pneumatic compressed air monitoring - Anti-running protection via contact roller if it is too thick workpieces - Workpiece transport via calibrated non-slip and non-stick fixed conveyor belts over heavy, cast tables Finely planed surface and spring-loaded pressure rollers with fine adjustment - Cardan shaft drive for smooth and consistent Workpiece transport - Feed gear motor with stepless speed 4-20 m/min - all motors electrically protected - ergonomically arranged controls - digital thickness display (resolution 0.1mm) with modern Magnetic tape system Technical data: - Sanding belt speed 22 m/s - Sanding belt length 1800mm - Sanding belt width 200mm - Working width 190mm - Grinding thickness 2-180mm - four brake motors for 5.5 kW drive - Feed motor 1.5 kW - Feed speed 4-20 m/min. - automatic height adjustment 0.37 kW - two brush units with fiber brushes D 120 x 200mm at 0.37 kW - Suction nozzle 2 x 180mm 2 x 120mm - Extraction air speed 20 m/s - Pneumatic connection 6 bar - Working height 870mm - Length (with soft disc 2740mm) 2600mm - Length with control panel (with soft disc 3035mm) 2985mm - Width 880mm - Height 1910mm - Weight approx. 3300 kg - Operating voltage 400 volts, 50 Hz, 3P - CE version ----- Price of the above machine on request! ----- Special accessories with additional charge: Workpiece blow-off - using nozzles from above and below at the machine outlet arranged, pneumatically controlled 4-belt sanding belt blowout via nozzles directly on the radii of the tension rollers inside the suction arranged, timer controlled on/off 5 seconds each, can be switched on separately Di...

Condition: used, Year of construction: 1980, used, good conditionMake JohannsenType T82KYear of construction 1980MachineNo. 14262GS-testedmotor 5.5 kWbelt length approx. 7800 mm x 150 mmtable size approx. 2800 mm x 900 mmcrank right approx. 850 mmupper belt coverupper grinding supportright-left runsuction connection D 180 mmweight approx. 900 kgstorage location 97447 Gerolzhofen, free loaded, unpackedhandover in actual condition as inspected,without guarantee and warranty Ndedpfx Aqevwfdkswoa

Condition: used, Year of construction: 1993, with sanding pad extractionused, top equipment, top condition, little usedmake Johannsentype T 94year of manufacture 1993machineNo. 20375GS wood dust testedmotor 4.0 kWsanding length approx. 2600 mmsanding width approx. 850 mmbelt length approx. 150 mm x 7800 mmtable size approx. 2780 mm x 800 mmoffset right approx. 550 mmelectric adjustmentupper belt covertable lightingbelt speeds 27 m/ht-left runsuction connection D 80/140 mm left / 120 mm rightspace requirement approx. 4050 mm x 2200 mmweight approx. 750 kgstorage location 97447 Gerolzhofen, free loaded, unpackeddelivery as seen,without guarantee and warranty Ndodjvwfncopfx Aqwsa

Condition: excellent (used), Year of construction: 2006, Dear customers currently we offer a disc sanding machine of the brand HoPa. Here are some technical datas: Disc diameter: 800mm Table length: 1.150 mm Table width: 470 mm Ndedpfx Aqoxlzkfewsa Table tilling up and down: +30/-45° Power: 4,0 kW Speed: 750 rpm Dimensions: L 130 cm x B 90 cm x H 180 cm Weight: 390 kg We are looking forward to your questions and inquiries.

Condition: good (used), Year of construction: 1996, double-sided top and bottom sanding with sanding shoe and dust brush max. sanding width 300 mm Nedjxfl Eaepfx Aqwoda max. sanding height 200 mm year of manufacture 1994 with CE mark

Year of construction: 2006, condition: used, Year of manufacture: Oct 2006 New: No Ndsdpfx Aqsxm Rqqewja FRONT SLIDING CONTAINERCHASSIS EXTENSION FROM A VAN HOOL CHASSIS.

Condition: used, axle configuration: 3 axles, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 9,000 kg, permissible axle load (axle 3): 9,000 kg, first registration: 06/2016, total length: 13,860 mm, total width: 2,550 mm, total height: 4,000 mm, suspension: air, tire size: 385/65 R22.5, wheelbase: 8,960 mm, Year of construction: 2016, = Additional options and accessories = - Disc brakes = Further information = Axle configuration Tyre size: 385/65 R22.5 Axle brand: BPW Suspension: Air suspension Rear axle 1: Lift axle; Max. axle load: 9,000 kg Rear axle 2: Max. axle load: 9,000 kg Rear axle 3: Lift axle; Max. axle load: 9,000 kg Weights Unladen weight: 7,730 kg Payload: 34,270 kg Gross vehicle weight: 42,000 kg Financial information Price: On request Identification Registration number: OP-33-HD Further information Please contact Maurits Van Giessen for more information. Ndsdpfx Asxni Aueqwja

Condition: new, Lot of Sanding Belts / Grinding Belts 420x1900 Large lot of new sanding belts / grinding belts / non-woven belts from brands including Tapir. Nedpfxsxnxuye Aqwsda Approx. 140 pieces. See images for type and grit. Condition: New Type: Sanding Belt Belt Width: 420 mm Belt Length: 1900 mm

Condition: good (used), 1 x Edge grinding machine Christen KB 2 Technical data: Working area: Guide rail length: 370 mm Sheet metal thickness: 0 to 2 mm, Ndsdpfx Aqefwx Dajwsa max. edge passage with guide rails fully open: 3 mm Speed: 3400 rpm Grinding wheel: 150 x 125 x 42 mm + 125 x 90 x 42 mm Accessories: 2 x grinding wheel with flange 1 x additional flange 1 x wrench for changing grinding wheels The machine can be inspected while powered on.

Condition: used, Linear drive, linear gear, screw jack, spindle drive, pneumatic drive, slide, guide, electromechanical linear axis Ndodpjfdd Axsfx Aqwja -Festo: mini slide 170587 JN02 -Stroke: 50 mm -Dimensions: 123/65/H40 mm -Weight: 0.7 kg

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 1720x950x1260 mm Weight 250 kg Ndjdjvz Hkgjpfx Aqwea Total power requirement 3,5 kw

Condition: new, Year of construction: 2026, The CORMAK MJ45-KB4 sliding table saw is an industrial panel saw with a scoring unit, designed for precise cutting of furniture boards, plywood, and other wood-based materials. The 2600 mm sliding table and robust construction ensure repeatability and high cutting quality. Key advantages of the machine Scoring unit with a separate motor – eliminates chipping on laminates and veneers. Aluminum sliding carriage running on hardened steel guide bars – ensures rigidity and smooth feed. 2600 mm sliding table – reliable handling of large and heavy panels. Main motor 5.5 kW – consistent cutting quality in continuous operation. Tilt range 0–45° – flexibility when cutting angled components. Extendable telescopic fence up to 3100 mm – fast and repeatable settings. Rotational speeds 4000/6000 rpm (main blade) and 8000 rpm (scoring blade) – optimal adjustment to material type. Cast iron body – vibration damping and cutting system stability. Construction and technology The design is based on a torsion-resistant cast iron body, which stabilizes the saw unit and minimizes vibrations. The aluminum carriage moves on hardened rods, ensuring long-term precision. The outrigger table facilitates handling large panels without additional support. Adjustment mechanisms with clear readouts (including angle indication on the handwheel) allow for quick and precise setup. Precision and performance The MJ45-KB4 sliding table saw ensures clean edges thanks to the 125 × 20 mm scoring blade and stable guide geometry. The cutting height range up to 90 mm at 90° and 56 mm at 45° allows processing of a wide range of formats and thicknesses. Two main blade speeds enable parameter adjustment to the material type, maintaining dimensional repeatability and reducing the need for rework. Applications Ndodpoywkc Defx Aqwja The machine is dedicated to workshops and production facilities seeking a stable panel saw with a scoring unit for serial cutting of furniture and structural elements. It meets the requirements of plants where quality, dimensional accuracy, and reliability in multi-shift operation are essential. Standard equipment Scoring unit with separate drive 2600 mm sliding table on guide bars Dial indicator for blade tilt Telescopic fence up to 3100 mm (front/rear mounting on support table) User manual in Polish CE declaration of conformity Optional equipment Set of saw blades for wood and laminate Dust extraction systems Panel transport trolley Technical specifications Sliding table length: 2600 mm Cutting width: 1250 mm Saw tilt: 0–45° Cutting height at 90°: 90 mm Cutting height at 45°: 56 mm Max main blade diameter: 315 mm Max scoring blade diameter: 125 mm Main blade speed: 4000 / 6000 rpm Scoring blade speed: 8000 rpm Main motor power (continuous S1/S6): 5.5 kW Scoring motor power (continuous S1/S6): 0.75 kW Weight: 650 kg