Used Slide Sanding for sale (9,231)

Condition: used, Year of construction: 2021, operating hours: 1,015 h, Drive: Track CE mark: yes Serial number: pv14-4xxxx Please contact ATS Norway for more information Please provide reference number upon request: 21503 Specifications: 2021 model 1015 hours (I want a little) Weight: 2670 kg 15.2 kW Machine width: 150 cm Rubber belts Tilt Excavator bucket Sanding bucket Chassis (see pictures) Lajdpfjxlx T Dox Aa Eek Auxiliary hydraulics Movable boom Services performed by Entrack Will be serviced before sale Light Air conditioning/ac Radio Ready for delivery Description: We have a 2021 Kobelco Sk25SR-6E Excavator w/ sanding bucket, digging bucket and tilt for sale. All services have been carried out by Entrack and a new service will be taken before sale. The machine functions as it should according to the owner. Ready for delivery Hours: 1015 Own weight: 2670 Kw: 15.2 CE: Yes Model: Sk25SR-6E Gravemaskin m/ pusseskuffe,graveskuffe og tilt

Year of construction: 2014, condition: used, Number of sanding units 6 St. sanding width 180 mm Sanding height max. 150 mm STAEHLE Grinding Machine Type Gloria/Saturn E 180 RF ----- Stähle Hess Finish Grinding Machine Type Saturn E 180 RF (formerly Gloria) with 2 grinding units, plus top and bottom Roto Finish grinding attachments. 1 upper grinding belt 1 lower grinding belt 2 upper Roto Finish grinding attachments 2 lower Roto Finish grinding attachments For a detailed description, please see the accompanying PDF from the manufacturer. Sold on behalf of a customer. Lajdpfx Aex Dng Doa Eok The images are from our archive and were taken before the machine was delivered to the customer. (Technical specifications according to the manufacturer - without guarantee!)

Condition: used, mileage: 11,200 km, power: 213 kW (289.60 HP), first registration: 02/2023, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, color: silver, gearing type: automatic, emission class: euro6, Equipment: ABS, air conditioning, electronic stability program (ESP), parking heater, tail-lift, MAN TGM 18.290 Horse Transport Motorhome Full Air Suspension Camera Euro 6 Reference Number: 1225954 * Horse transporter with high-quality living area * Condition: As new * Original 11,200 km * Power: 213 kW / 290 HP * Displacement: 6,871 cm³ * Engine hours: 221 h * AdBlue * Automatic transmission * ABS * ASR (traction control) * ESP (electronic stability program) * Rear axle differential lock * Suspension: Full air suspension (front/rear) * Adaptive cruise control * Lane keeping assist * Overhead storage above driver/center/passenger * Air-suspended comfort seats for driver/passenger * Reversing camera * CD radio / USB / AUX * Heated driver’s seat * Full leather seats * Electric windows driver/passenger * Auxiliary heating * Automatic climate control * Manually extendable sun visor on driver’s door * Transparent exterior sun visor * Fog lights Horse compartment * Direct access from living area possible * Non-slip flooring * Rear ramp with side safety barriers * Partitions * Winch * Cargo compartment lighting * LED lighting Living area * Side slide-out for extended living space * Seating area with table * Shower cubicle * WC * Wash basin * Hob * Refrigerator * Oven * 2 sleeping berths * Storage space * LED lighting * TV * Sound system * Air conditioning Tyres: 1st axle: 315 / 70 R22.5 (35%) air-suspended 2nd axle: 315 / 70 R22.5 (35%) air-suspended --- Price: €190,000 + 19% VAT For further questions, you can reach us at the following phone numbers: * We speak: German, English, French, Polish, and ????? Errors, changes, and prior sale reserved. Lajdpfjx Infqsx Aa Ejk

Condition: used, Year of construction: 1984, Dear customers, we currently offer a used disc or plate sander for model and mould making from the brand Zimmermann. Here are the technical specifications for a machine of type SZ2: Disc diameter: 600 mm, double-sided Table length: 755 mm Table width: 285 mm Table tilt: 30/45° Mitre guide: 60/60° Power: 1.5 kW Speed: 1,000 rpm Forward/reverse operation Emergency stop Lsdpsx Eym Isfx Aa Eoak Dimensions: L 90 cm x W 80 cm x H 140 cm Weight: 390 kg We look forward to your questions and enquiries!

Condition: like new (used), Year of construction: 2022, operating hours: 92 h, functionality: fully functional, machine/vehicle number: 13322, Edge grinding machine for straight edges model MUSAnext for processing natural stone Grinding and polishing of straight edges with upper and lower chamfers, Calibration and regrinding of workpiece surfaces, Milling of water grooves and grooves on the face, Milling of half or quarter round bar profiles Torsion-resistant steel frame as a monoblock for installation on a stable hall floor Sandblasted machine frame, cathodically galvanized, primed with epoxy zinc paint and painted with polyacrylic paint Electrical control cabinet integrated into the machine frame Machine components painted using the cataphoresis process for optimum corrosion protection Stainless steel splash guards Service water drip tray with side drains Automatic central grease lubrication 2 water valves for automatically controlled water supply for end faces and bevel grinding supports Conveyor belt with wedge for precise longitudinal guidance, width 600 mm Conveyor belt support on the machine frame made of stainless steel Adjustable conveyor belt speed 0 - 250 cm/min on the operator panel Dynamic conveyor belt speed for increased feed rate when feeding in and out workpieces Flushing device for inside and outside of conveyor belt Workpiece stop roller bar at the belt infeed for precise alignment of the workpieces Belt running direction from left to right Table working height 780 mm Table extension console can be swiveled manually, rollers offset in two rows arranged with additional extension of 1.5 meters Pneumatically height-adjustable workpiece pressure rollers, which enable processing of different workpiece thicknesses without additional manual adjustments Operator panel with 8" touchscreen Programming of switch-on and switch-off times for each support Programmable machining length of end faces and chamfers Lodpfx Aastzp T Hj Eeak Workpiece length measurement with automatic spiral step system Magnetic sensor for detecting the workpiece thickness, for automatic positioning of each support with automatic height adjustment MAT sensor for cross reinforcements, automatically detects the height and number of cross reinforcements and controls the pneumatic pressure cylinders

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 1680x930x1200 mm Weight 350 kg Lsdevz Hn Sjpfx Aa Esak Total power requirement 3,5 kw

Condition: used, Year of construction: 2022, operating hours: 1,304 h, Serial number: HCMDEQ50E0009xxxx Please contact ATS Norway for more information Please provide reference number upon request: 20257 Ljdpfx Aswi R I Dja Esak Specifications: - 2022 model - Certified to: 02/26 - 1304 hours (will increase slightly) - 8770 kg - 42.4 kW - Machine width: 229 cm - Blade - Extra hydraulics - Central lubrication - Undercarriage (see pictures) - Service agreement - Rototilt - Cleaning bucket - ​​Excavating bucket - ​​Narrow bucket - ​​Roadliners - MIG 2 levers - S50 attachment - Extra lights - Air conditioning/ac - Radio - Ready for delivery Description: We have a 2022 Hitachi zx85us-6 excavator w/ rototilt, cleaning bucket, digging bucket, narrow bucket for sale. The machine is well maintained and in good condition. It is on service agreement as of today. Ready for delivery. Hours: 1304 Total Weight: 8770 Year controlled: Yes Year controlled until: 02/26 Width: 229 Kw: 42.4

Condition: used, Year of construction: 2023, New demonstration machine! List price €4,938 net. The robust Junior R1 offers all the features you would expect from a modern edge sanding machine. Its massive grey cast iron sanding unit with a powerful motor ensures maximum sanding performance. The work table, height-adjustable by spring pressure, allows for optimal belt use and safe operation. The upper section is made of heavy cast iron with an integrated three-phase motor (380 V, 2.2 kW, 2850 rpm). The machine is equipped with a built-in switch-plug combination, motor protection switch, and main switch compliant with VDE standards. Sanding belt back panel dimensions: 850 x 150 mm. Steel table height-adjustable by spring pressure. Belt size: 150 x 2280 mm. The sanding belt back panel is covered with a protective pad. The machine, when connected to a central extraction system with an air speed of at least 20 m/s, is dust-certified (GS). Includes angle and mitre fence. Technical data: • Motor power: 2.2 kW • Belt size: 150 × 2280 mm • Belt speed: 22 m/sec • Table size: 750 × 350 mm • Required space: 1000 × 800 mm • Weight: approx. 180 kg • Extraction connection Ø: 100 mm. Location: Rieth Lasdpfx Asx Hwr Roa Ejk

Condition: as good as new (ex-display), Year of construction: 2024, The robust Junior R1 offers all the features that a modern edge sanding machine must have. A solid cast iron sanding unit with a powerful powerful motor ensures maximum sanding performance. The working table, adjustable in height by spring pressure, allows optimum belt utilization and safe working. Belt oscillation, infinitely variable unit swiveling, and veneer unit, a veneer sanding device and an additional table for and an additional table for sanding work on the on the deflection roller. The machine is supplied with an assortment of sanding belts; an angle and miter fence is also included. Technical data: - Motor power: 2.2 kW - sanding belt size: 150 × 2280 mm - grinding belt speed: 22 m/sec. - table size: 750 × 350 mm Laodpfxsd R Ev Dj Aa Eok - space requirement: 1000 × 800 mm - weight: from 180 kg - Suction Ø: 100 mm Location: Ex warehouse 54634 Bitburg - free loading - Can be shipped for a fee

Condition: used, Year of construction: 1977, machine/vehicle number: #148, Dear customers, we are currently offering you a used double-sided disc sanding machine from Zimmermann. Technical data: Disc diameter: 900 mm Table length: 1200 mm Table width: 400 mm Table below the disc center: 100 mm Table tilt: 25/30° Angle stop: 60/60° Table height above floor: 750 mm Lodex Eymzopfx Aa Esak Power: 4 kW Speed: 750 rpm Dimensions: L 170 cm x W 130 cm x H 150 cm Weight: 780 kg We look forward to your questions and inquiries.

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 1720x760x1160 mm Weight 230 kg Total power requirement 3,5 kw Ljdpfjvz Hnrox Aa Eeak

Condition: used, Year of construction: 1999, operating hours: 15,153 h, CE mark: yes Serial number: yh01-0xxxx Please contact ATS Norway for more information Please provide reference number upon request: 21909 Laedpfx Aajxz Nz Ds Eek Specifications: 1999 model 15153 Hours 62.5 kW 14600 kg Cut Additional hydraulics Chassis (see pictures) Sweating a little bit on the front cylinder Track steering Sanding bucket Excavator bucket Missing a cover (see pictures) Errors and shortcomings occur Small hydraulic leak that they can't figure out Climate Light Radio Ready for delivery Description: We have a 1999 Kobelco sk135SRLC w/ sanding bucket and digging bucket for sale. There is a small hydraulic leak that the owner cannot figure out. It is crawling faster on one track than the other. The owner does not know if this is related to the leak or if the belt motor needs to be replaced. It also sweats on one of the lift cylinders. Other than that, the machine works as it should, according to the owner. But errors and shortcomings exist. And some cost must be taken into account. Ready for delivery Hours: 15153 Own weight: 14600 Kw: 62.5 CE: Yes Model: sk135SRLC m/ pusseskuffe og graveskuffe

Condition: used, Year of construction: 2024, New demonstration machine! List price: €4,938 net. The upper section is a heavy-duty cast iron design with an integrated three-phase motor, 380 V, 2.2 kW, 2850 rpm. The machine is equipped with an integrated switch-plug combination, motor protection switch, and main switch compliant with VDE standards. Dimensions of the sanding belt backing: 850 x 150 mm. The steel work table height is adjustable via spring tension. Belt dimensions: 150 x 2280 mm. The sanding belt backing is covered with a graphite slip lining. The machine is supplied with an assortment of sanding belts; also included in the scope of delivery are an angle and miter gauge. When connected to a central extraction system, the machine is dust-tested (GS) by Holz-BG Stuttgart for an airspeed of at least 20 m/s. Standard equipment includes: - tiltable 90-180°, - motorized belt oscillation, - small support table at the deflection roller, - pneumatic belt tensioning. Technical data: Motor power: 2.2 kW. Sanding belt size: 150 x 2280 mm. Sanding belt speed: 22 m/s. Table size: 750 x 350 mm. Space requirement: 1000 x 800 mm. Weight: from 180 kg. Extraction connection Ø: 100 mm. Storage location: Rieth. Ljdpfx Aasx Hwpvs Esak

Condition: excellent (used), Year of construction: 2001, Langzauner edge sander EK 3/4 top condition Accessories: some abrasives still available Veneer stop jaws Table width: 350 mm Table length: 1,000 mm Maximum sanding belt width: 150 mm Sanding belt length: 3,000 mm Belt speed: 22 m/s Main motor: 2.2 kW Motorized feed Veneer sanding Circular sanding support Oscillation Height adjustment: table, manual Sanding belt pivotable: Yes Conformity marking: CE mark Ljdpfx Asvr Hw Iea Esak Total connection: 4.6 kW Space required: Length: 1.7 m Width: 0.85 m Height: 0.9 m Location: from stock 54634 Bitburg - immediately available -

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 1320x700x1120 mm Lajdpfxevz Hmze Aa Esk Weight 125 kg Total power requirement 1,5 kw

Condition: used, Year of construction: 2015, operating hours: 6,175 h, CE mark: yes Serial number: 3xxxx Please contact ATS Norway for more information Please provide reference number upon request: 21416 Specifications: 2015 model 6175  Certified  7620 kg 50.7 kW Machine width: 322 cm Cut Chassis (see pictures) Additional hydraulics S50 attachment Tiltrotator Sanding bucket Narrow drawer Excavator bucket Light Air conditioning/ac Radio Delivery by appointment   Description: We have a 2015 Komatsu PC78us Excavator w/ Rototilt, sanding bucket, narrow bucket and digging bucket for sale. The machine functions as it should and is certified  Okt 25 sale. Services and maintenance have been taken on a continuous basis. Lodpfx Aaoxf Tdkj Esak Ready for delivery Hours: 6175 Own weight: 7620 CE: Yes Model: PC78us Gravemaskin m/ Rototilt, pusseskuffe, smalskuffe og graveskuffe

Condition: used, Year of construction: 2024, New showroom machine! List price: €10,643 net. The model for enhanced comfort. The RS-2010 edge sanding machine, with its versatile features, provides complete processing in edge sanding. Quick switching between freehand and veneer edge sanding, belt oscillation, and continuously adjustable sanding unit tilt allow for universal machining. The height-adjustable pneumatic support table and pneumatic belt tensioning ensure easy handling. Technical features: - Pneumatically height-adjustable work table - Continuously adjustable sanding unit tilt up to 45° - Simple conversion to veneer edge sanding - Pneumatic belt tensioning - 0 - 45° display for sanding unit - Stable support table at the return roller - Feed console - Angle and mitre fence Technical data: Motor power: 3 kW Belt speed: 22 m/s Belt length: 2,760 mm Belt width: 200 mm Table size: 450 x 920 mm Required space: 1,200 x 2,000 mm Extraction (dust collection): 120 & 80 mm Total weight: approx. 500 kg + 5 years warranty on all our products (except wear parts)! Lodpfsx Hwppsx Aa Eoak Stock location: Rieth

Condition: new, Year of construction: 2025, Heavy machine base guarantees high torsional rigidity and vibration-free operation Better sanding results due to sanding belt oscillation via separate gear motor Oscillation optionally switchable Veneer edge sanding device with fine adjustment as standard Grooved infeed ruler for sanding veneer overhangs Quick changeover from veneer to solid wood sanding Height-adjustable sanding table for utilization of the entire sanding belt width Height adjustment of the sanding table and sanding unit swivelling via hand wheels Height-adjustable additional table with suction device for grinding radii Optimum chip removal through extraction at the unit and at the cross table Automatic compensation of strip length differences due to spring-loaded strip tension Dimensions and weights Length approx. 1900 mm width/depth approx. 810 mm Height approx. 1230 mm Weight approx. 290 kg Dust extraction connection Suction socket diameter 120 mm Drive power Oscillating motor 0,25 kW Work table(s) Working table length 960 mm Lsdpeff Ed Tjfx Aa Eoak Working table width 352 mm Working table height adjustment 210 mm Cross table height min. 730 mm Electrical data Input power 3 kW Supply voltage 400 V Phase(s) 3 Ph Current type AC Mains frequency 50 Hz Sanding unit Sanding belt length 3000 mm Sanding belt width 150 mm Belt speed(s) 20 m/s grinding surface length 1050 mm Grinding surface width 220 mm Swivel 0 - 45 ° Oscillation stroke 20 mm Availability: Short term

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 1700x950x1260 mm Weight 400 kg Ledpfevz Hlqsx Aa Esak Total power requirement 3,5 kw

Condition: used, Year of construction: 2025, operating hours: 920 h, Serial number: 3xxxx Please contact ATS Norway for more information Please provide reference number upon request: 21868 Specifications: 2025 model 920 hours (I want to know a little) 23985 kg Certified to: 12/25 Chassis: good Track guides Central lubrication Auxiliary hydraulics Excavator bucket Sanding bucket Laodsxy Ex Ajpfx Aa Ejk Tiltrotator GPS S70 attachment Air conditioning/ac Light Service history Ready for delivery Description: We have a 2025 Volvo ECR235 EL excavator with digging bucket, sanding bucket, tiltrotator and GPS for sale. The machine functions as it should and is in good condition. All services have been carried out by Volvo. The machine is in daily operation and the number of hours will increase slightly. Ready for delivery Hours: 920 Own weight: 23985 Model: ECR235 EL gravemaskin m/ graveskuffe, pusseskuffe, rototilt og gps

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 4700x1600x1500 mm Weight 580 kg Total power requirement 3 kw Ledpfx Aaovz Hlko Eeak

Condition: used, Year of construction: 2024, operating hours: 1,188 h, Serial number: 31xxxx Please contact ATS Norway for more information Please provide reference number upon request: 21869 Specifications: 2024 model Certified until 12/25 Hours: 1188 Weight: 36800 kg Central lubrication Auxiliary hydraulics Chassis (good condition) S70 attachment Dental tray Sanding bucket Tiltrotator GPS Track guides Hammer glass (front window) Standard windshield included Ljdsxy Expspfx Aa Esak Compressor with air hose in front of the cabin Light Service history Air conditioning/ac Radio Ready for delivery   Description: We have a 2024 Volvo EC300el excavator w/ Toothed Bucket, Sanding Bucket, Rototilt and GPS for sale. The machine is functioning as it should and is in weekly operation so the number of hours will increase slightly. All services have been performed by Volvo. The machine appears to be in good condition. Ready for delivery Hours: 1188 Own weight: 36800 Year controlled: Yes Year controlled until: 12/25 Model: EC300el gravemaskin m/ Tannskuffe, Pusseskuffe, Rototilt og Gps

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 1720x950x1260 mm Laedpfx Aovz Hkgsa Eok Weight 250 kg Total power requirement 3,5 kw

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 1470x810x1120 mm Lasdpjvz Hhlefx Aa Ejk Weight 250 kg Total power requirement 3 kw

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 4200x1600x1500 mm Weight 540 kg Total power requirement 3 kw Lsdpovz Hgnsfx Aa Esak