Used Sinker Edm Machine for sale (91,690)

Condition: refurbished (used), Year of construction: 2009, functionality: fully functional, GF AgieCharmilles Progress VP3 Year of manufacture: 2009 Travel paths: X= 500 mm, Y= 350 mm, Z= 426 mm U/V axis travel: +/- 70 mm Maximum taper: 30° at 100 mm height Maximum workpiece dimensions: 1050 x 650 x 420 mm Maximum workpiece weight: 400 kg (submerged) / 800 kg (out of tank) Achievable surface quality: Ra: 0.20 µm Maximum cutting speed: 500 mm²/min Available wire diameters: 0.15 – 0.33 mm Submerged wire EDM machine with automatic wire threading and re-threading after wire breakage With manual front door (accessible from one side) Dkjdpjxggdmjfx Af Isw Including AGIEJOGGER handbox for convenient setup AGIE IPG-V generator AGIEVISION 5 control unit Dimensions (L x W x H): 1940 x 2300 x 2600 mm Net weight: 3460 kg The machine is cleaned and fully overhauled after receipt of order. You will receive a 6-month warranty on all machine parts. We are also happy to offer commissioning and training services.

Year of construction: 2005, condition: ready for operation (used), This 3-axis Sodick AQ327l wire EDM machine was manufactured in 2005. Despite a permanent short circuit due to a defective circuit board, it includes replacement belts and has had its axis drives and controls replaced. Operated via a PC monitor, it comes with a repaired computer and SolidWorks software. Consider the opportunity to buy this Sodick AQ327l wire EDM machine. Contact us for more information about this machine. Dedpfxsxf N Nis Af Iskw Application Types EDM

Condition: used, Year of construction: 2009, operating hours: 3,641 h, functionality: fully functional, machine/vehicle number: 09N12011, workpiece weight (max.): 500 kg, travel distance X-axis: 400 mm, travel distance Y-axis: 300 mm, travel distance Z-axis: 220 mm, total height: 2,015 mm, total length: 2,706 mm, total width: 2,706 mm, workpiece height (max.): 215 mm, workpiece width (max.): 700 mm, workpiece length (max.): 810 mm, table width: 550 mm, overall weight: 2,500 kg, table length: 650 mm, We are selling a Mitsubishi NA1200 Advance wire EDM machine. The machine was in operation in our single-shift production until recently and can be inspected under power. Dkjdpfxexm Rl Io Af Iew

Condition: excellent (used), Year of construction: 2002, operating hours: 34,000 h, functionality: fully functional, Agie Excellence 2F, year 2002. Machine in excellent condition. Can be inspected at our premises in Semsales, Switzerland. Dsdsw N Tazopfx Af Iokw

Condition: good (used), Year of construction: 2006, functionality: fully functional, Travel (X/Y/Z): 350 × 250 × 250 mm Max. workpiece dimensions (X/Y/Z): 750 × 550 × 250 mm Max. workpiece weight: 200 kg (450 kg) Max. taper angle: +/- 30°, 100 mm Travel (U/V): +/- 70 mm Automatic wire threading Wire diameters: 0.10–0.33 mm AGIE IPG generator with power supply module Machine dimensions (mm): 1640 × 2040 × 2220 mm Machine weight: 3350 kg Bsw Nexqru Ss Hrdhsdi Dkodpfoxt Rr Uox Af Iow Cooling: external cooling required Best surface finish: Ra 0.2 µm Year of manufacture: 2006 Fully functional

Condition: used, Year of construction: 2003, Axes X/Y/Z: 350mm/250mm/350mm, workpiece dimensions X/Y/Z: 650mm/580mm/250mm, max. workpiece weight: 100kg. Inner dimensions of working container: 860mm/620mm/360mm, rotation: 60rpm, capacity: 415l, filter quality: 3μm-5μm. Dimensions X/Y/Z: 2689mm/1855mm/2593mm, empty weight: approx. 3200kg, filled weight: approx. 4200kg, control: AgieVision. Documentation available. Dkjdpfxsw T Rqle Af Isw

Condition: refurbished (used), Year of construction: 2011, functionality: fully functional, GF AgieCharmilles CUT 400 Year of construction 2011 Control Charmilles Millenium Travels (X / Y / Z): 800 x 550 x 510 mm Travel (U / V): 800 x 550 mm Max. Taper angle: +/- 30° at 510 mm height Integrated Collision Protection (ICP) on all 5 axes Dedpsuuz Iijfx Af Iokw Maximum workpiece dimensions: 1450 x 900 x 510 mm Maximum workpiece weight: 3000 kg Cutting speed of 400 mm²/min Best surface finish: Ra 0.2 µm Available wire diameters: 0.20 mm to 0.30 mm Incl. option for large wire reel with 25 kg (K250) Dimensions of the complete system: 2670 x 2870 x 2645 mm Total weight of the system: 6300 kg The machine is cleaned, overhauled and tested for all functions by us after receipt of order. Optional: - Commissioning of the machine on your premises - Training on site - Cooling unit - Transportation - Clamping bar set

Condition: used, Year of construction: 1998, EDM machine Charmilles Robofil 4020 SI, year 1998. Unfortunately, the machine is no longer connected to power. Dksdpfx Asw E Evujf Isw

Year of construction: 1998, condition: ready for operation (used), General Data Measurements width 3000 mm Measurements depth 2000 mm Measurements height 2290 mm Machine weight 3200 kg Control Unit Djdsxdflkepfx Af Iekw Brand MAKINO Model MGF Main Drive Number of axis 3 Movement X-Axis Movement 300 mm Y-Axis Movement 250 mm Z-Axis Movement 250 mm Workpiece Workpiece weight 500 kg This 3-axis Makino EDNC 30 die-sinking EDM machine was manufactured in 1998. It features travel paths of 300mm in X, 250mm in Y, and 250mm in Z, a table size of 500 × 350 mm, and can handle a maximum workpiece weight of 500 kg. Consider the opportunity to buy this Makino EDNC 30 die-sinking EDM machine. Contact us for more information about this machine. Application Types EDM

Condition: used, Year of construction: 2004, Travel path: X 500 mm Dkodpfx Aow Emfdof Isw Y 350 mm Z 300 mm incl. cooler incl. large wire spools

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, Technical Specifications Travels (X / Y / Z): 350 × 250 × 256 mm U / V Axis Travels: ± 70 mm Max. Workpiece Dimensions (LxWxH): approx. 750 × 550 × 250 mm Max. Workpiece Weight: approx. 450 kg Table Size: 620 × 400 mm Wire Diameter: 0.15 – 0.33 mm (commonly 0.25 mm) Max. Taper Cutting Angle: ± 30° at 100 mm height Positioning Accuracy: ± 2 µm Psw N Hjxdubzjl Icsrb Wire Threading System: Fully automatic, fast, reliable Generator: Intelligent GF AC Cut, real-time spark control Surface Finish: up to Ra 0.1–0.2 μm (after finishing cuts) Control System: AgieVision (ergonomic, touch display, 3D graphics) Dielectric: Deionized water Machine Dimensions (LxWxH): approx. 2200 × 2200 × 2200 mm Machine Weight: approx. 3500–4000 kg Dkedpfx Ajxt Hz Sof Ijw

Condition: used, functionality: fully functional, Year of construction: 1999, machine/vehicle number: 1270, DISINTEGRATOR FOR SPARK ERODING BROKEN DRILLS AND TAPS Dkjdoxniv Uopfx Af Ijw - Year of manufacture: 1999 - For taps M1.6 to M38 - For drills Ø1 to Ø38 - 1x collet Ø4 mm - 1x collet Ø4.5 mm - 1x collet Ø5 mm - 2x collet Ø6 mm - 380 V - 10 kVA - 15 A - 50 Hz - Serial No. 1270

Condition: ready for operation (used), Year of construction: 2002, functionality: fully functional, FANUC alpha - O I B machine travels: X 320, Y 220, U 120, V 120, Z 180 automatic wire threading can be seen in good working condition Dodpfjxf I D Esx Af Iokw year 2002

Condition: excellent (used), Mitsubishi wire EDM machine FA20S, year of manufacture: 2006 With accessories Djdpjwt N Uqsfx Af Iokw More pictures and data will follow shortly.

Year of construction: 2018, condition: ready for operation (used), General Data Machine weight 2200 kg Control Unit Brand FANUC Model 31i-WB Movement Z-Axis Movement 255 mm Workpiece Workpiece weight 500 kg Additional Equipment Dksdpexqtdnjfx Af Isw Optional Thin wire, Wire diameter [mm]: Ø 0.05 ~ Ø 0.30 Automatic front door UV axis travel [mm]: ± 60 × ± 60 Minimum step increment of the drives [mm]: 0.0001 This FANUC Robocut alpha-C400iB was manufactured in 2018. It features a maximum workpiece size of 730 x 630 x 250 mm and can handle weights up to 500 kg. The machine includes a FANUC 31i-WB controller and supports wire diameters from 0.10 to 0.30 mm. Consider the opportunity to buy this FANUC Robocut alpha-C400iB wire edm machine. Contact us for more information. Application Types EDM

Condition: reconditioned (used), Year of construction: 2006, functionality: fully functional, machine/vehicle number: 06F2S765, workpiece weight (max.): 1,500 kg, travel distance X-axis: 500 mm, travel distance Y-axis: 350 mm, travel distance Z-axis: 300 mm, The machine is currently serviced and in good condition. The wear parts have been extensively replaced. The EDM machine has barely been used in the last four years. Transport, installation and operator training can be organized at an additional cost. Dksdpfx Aswtd Edsf Ijw

Condition: good (used), Year of construction: 2008, operating hours: 16,000 h, travel distance X-axis: 750 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 400 mm, Work tank dimensions W x D: 1,264 x 973 mm Dksdpfx Afjxg Il Se Ijw Max. workpiece weight: 1,500 kg Distance floor to table surface: 1,000 mm Machine dimensions W x D x H: 2,100 x 2,800 x 2,350 mm Machine weight: 5,300 kg Travel of U and V axes: 770 x 520 mm

Condition: excellent (used), For sale is a system with 2 OPS Ingersoll Gentry Eagle 500 machines and an Erowa automation for tool and workpiece change. The system is in very good condition and fully functional. Both machines are loaded via the Erowa automation, one machine has its own tool changer. Technical data sheets available for download below in the advertisement Technical data for the EDM machines: Container dimensions: WxDxH: 770 x 670 x 440 mm Dielectric height: max 395 mm max top load: 100 kg min. Distance: 135 mm max. distance: 585 mm speed: 1-20 1/min Measuring resolution: 0.001 ° Work table (W x D): 750 x 650 mm load capacity: 1000 kg travel X/Y/Z: 525x400x450 mm Filter system: Cartridge filter: Filter area: 16 m² Total volume: 400 l Dimensions (WxHxD): 1356x2653x2284 mm Weight: approx. 4400 kg Technical data Erowa Automation: X-axis: 1200 mm Z-axis: 1050 mm Dedpfx Asq Su Hnef Iokw C-axis: 350 ° A-axis: +/-180 ° B-axis: +/- 90 ° Y-axis: 1.1-18.74 m (METER!) Transfer weight: max. 130 kg The system is also equipped with 2 magazines Dismantling, loading and shipping can be organized throughout Europe for an additional charge. Prices plus VAT Viewing possible by appointment. Contact us, our team will be happy to help you. Trade-in or exchange possible! Machines purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MUCH MORE. Do you need a high-quality but inexpensive metalworking machine for your production? Or do you want to sell yours? For further information or contact options, please visit our website

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, Table size 600 x 400 mm Max size of workpieces 900 x 600 x 330 mm Max weight of workpieces.750 kgs X travel 400 mm Y travel 300 mm Dkedpfxsxpfits Af Iew Z travel 300 mm Power of generator 60A Dimensions LxWxH = 2190 x 1880 x 2360 mm Weight 2800 kgs Accessories - Magnet table - EROWA tool clamping system - Machine manual The machine is in great technical condition and will be sold because of company liquidation.

Condition: refurbished (used), Year of construction: 2017, functionality: fully functional, GF MachiningSolutions CUT E350 Year of manufacture: 2017 Control: AC CUT HMI Travel distances (X/Y/Z): 350 x 250 x 250 mm Travel distances (U/V): +/- 45 mm Taper: +/- 30° at 77 mm height Workpiece dimensions: 820 x 680 x 250 mm Max. workpiece weight: 400 kg Collision protection on X/Y/Z axes Best surface finish on carbide/steel: 0.12/0.18 µm Maximum cutting speed: 300 mm²/min Overall dimensions: 1750 x 2470 x 2200 mm Total weight: 2525 kg The machine is cleaned, overhauled, and tested by us after receiving your order. We are happy to perform a test cut tailored to your needs. Dkodpfxexbzimo Af Isw Optional services: - Commissioning and training - Transport - Warranty - Cooling unit

Year of construction: 2013, condition: ready for operation (used), General Data Measurements width 2720 mm Measurements depth 2520 mm Measurements height 2290 mm Machine weight 4400 kg Main Drive Number of axis 5 Movement X-Axis Movement 650 mm Y-Axis Movement 400 mm Dkjdpfjxn Uyxsx Af Ijw Z-Axis Movement 400 mm V-Axis Movement 160 mm U-Axis Movement 160 mm Workpiece Workpiece weight 800 kg This 5-axis EXCETEK V 650 G was manufactured in 2013. It's a wire EDM machine capable of handling workpieces up to 1000 × 700 × 345 mm and 800 kg. Features include X, Y, Z travels of 650 mm, 400 mm, and 400 mm respectively, plus U/V-axis travel of 160 × 160 mm. It boasts a solid cast-iron construction and a stainless steel worktable for enhanced durability and precision. Contact us for more information about this machine. Application Types EDM

Condition: used, Year of construction: 1993, travel distance X-axis: 320 mm, travel distance Y-axis: 220 mm, travel distance Z-axis: 116 mm, workpiece height (max.): 150 mm, workpiece width (max.): 990 mm, workpiece length (max.): 505 mm, table width: 420 mm, table load: 500 kg, Equipment: cooling unit, documentation/manual, Taken out of production in working condition, removed due to the purchase of a new machine. Dkjdewu Shpjpfx Af Isw The machine is currently disconnected and dismantled in our warehouse. All cables are numbered and photographed; these can be shared after payment for the machine to ensure correct installation at the new location.

Condition: excellent (used), Year of construction: 2012, Offer very good flexo imprinting machine. Manufacturer is the company Sondermaschinenbau Oschersleben. Dodpfoqmnfhjx Af Iekw Flexo machine 1 color. Very well maintained condition and ready for immediate use incl. various extras.

Year of construction: 2004, condition: ready for operation (used), Control Unit Dodpfx Aexbihqsf Iekw Brand MITSUBISHI Model 64 bit CNC Movement X-Axis Movement 525 Y-Axis Movement 400 Z-Axis Movement 450 Workpiece Workpiece weight 1000 kg Table Outer length 730 mm Outer width 630 mm This 3-axis die-sinking EDM machine manufactured in 2004 features a Mitsubishi 64-bit CNC control system and a powerful 70 Ampere generator. It has a travel range of 525 x 400 x 450 mm and includes a 20-fold electrode changer. The work table measures 730 x 630 mm with a load capacity of 1000 kg. Consider the opportunity to buy this OPS INGERSOLL Gantry 500. Contact us for more information about this machine. Application Types EDM

Year of construction: 2008, condition: ready for operation (used), General Data Measurements width 1900 mm Dedsxpyvhepfx Af Iekw Measurements depth 1800 mm Measurements height 2200 mm Movement X-Axis Movement 550 Y-Axis Movement 400 Z-Axis Movement 350 This 5-axis AgieCharmilles Spirit 3 was manufactured in 2008. It features an integrated C-axis and electrode magazine, multitasking operating system with object-oriented graphical interface (AEP Spirit), and a table size of 850×650 mm. Movement range includes X:550, Y:400, Z:350. Consider the opportunity to buy this AgieCharmilles Spirit 3 wire EDM machine. Contact us for more information about this machine. Application Types EDM