Used Short Bar Loader for sale (20,353)

Condition: used, Reportedly unused GEA Niro Soavi model NS3006H homogeniser. Maximum flow rate 50 litre/hr with maximum pressure of 1500 bar. Unit includes pump and local controls. All mounted on stainless steel mobile frame. Bledpfx Aezinb Soqtsi

Condition: used, Used Fabrication Technology approximately 5,957 litre total capacity 316 stainless steel vertical reactor. Unit measures approximately 2,150mm tan to tan x 1,600mm diameter. Unit has welded dished top and bottom heads. Internal rated 3 bar/full vacuum design pressure at 5 to 37 deg.c. External stainless steel limpet coil jacket rated 6 bar/full vacuum design pressure at 5 to 37 deg.c. Unit has top entry stainless steel agitator with Lighnin model LS220 drive. Unit is mounted on side supports. Dimensions: 2,150mm tan to tan x 1,600mm diameter Bedpfxszim A Io Aqtoli

Condition: excellent (used), Year of construction: 2019, Ref: 10959 . 2019 DGR RHLE 30 Book Line Fully automated, compact, automatic casing-in line for short-run hard cover book production. Excellent condition, only 375,000 books made! Bledpfxey Avl Is Aqtji Features: * Very short make-ready times (no need to change format parts!) * Automatic motorised format change (optional) * Simple operation by a single operator *Superior industrial book quality *Small footprint *Offline or inline operation possible *Special single copy option for individual books * Designed for books with rounded or square spines Equipped with: Book block feeder Pre-heating section for hot-melt bound books Rounding & backing station (adjustable, no size change parts req.) Back lining & Headbanding station (with hot-melt or PVA glue) Flexible case magazine for plastic or hardcover cases Case preheating & forming unit (adjustable to the spine radius) Casing-in station with PVA gluing (adjustable film thickness) Hot-melt joint gluing station with pre-melter Transfer to; FE33 Pressing & joint forming machine Cooling, drying conveyor. Specification: Mech. speed, Max: 1200 cycles/h Format range (W x H) Max: 300mm x 300mm / Min: 100mm x 120mm Book block thickness, Max: 60mm / Min: 8mm (opt. 4mm) Dimensions: ca. 5000mm x 4000mm

Condition: excellent (used), Bradman Lake DRT robotic top loader machine, can be available with SL903 cartoner. This line was packing cereal bars into small and large cartons for a major UK brand of natural cereal bars. It has only just come out of production (early September 2023). Bledpfxon Uph Ue Aqtsi

Condition: excellent (used), Year of construction: 2014, operating hours: 1,350 h, machine/vehicle number: 14 083-1, Seydelmann K126 HU all stainless steel bowl cutter with rare option of fitted tote bin loader. Bought new in 2015 and only used for cutting herbs. Only used for 1,350 hours since new. Bjdpfx Aevcqh Esqtsli

Condition: excellent (used), Year of construction: 2016, Seydelmann K126 bowl cutter with tote bin loader. In almost new condition having only been used for 3,800 hours. Can be sold with full safety cage guarding system. Blsdpfx Aovthdfsqtji

Condition: excellent (used), This line was bought to produce protein bars for a sports nutrition business (under 900 hours). The machinery is in immaculate condition having only been used occasionally for their own production. PLEASE NOTE THAT THE VEMAG HP25E HAS BEEN REPLACED BY A NEWER HP20E FROM A DIFFERENT FACTORY. Bjdpfjunm S Hex Aqtjli

Condition: used, all stainless steel discharging height ± 1.450 mm 400V - 50 Hz Bledpfx Aqezht Etjtji Motor 0,55 kw mobile dimensions (l x w x h) : ± 1.450 x 1.350 x 2.900 mm

Year of construction: 2000, condition: good (used), Technical Specification Punching/Shearing system Material * flatsteel length : 6.000 mm Bljdpfx Asq Hu H Rsqtoi width : 50-500 mm thicknes : 5-30 mm * angle steel length : 12.000 mm width : 50 x 50 — 150 150 mm thickness : max. 15 mm Punching Machine VPO 1400 Capacity : 1400 kN (140T) Punch diameter/material thickness (max): 32 mm/25 mm Punching in flat- and angle steel : yes Number of punches for flat steel : 4 Number of punches for angle steel : 1 Hydraulic clamping : yes Centring points : yes Mist lubrication system : yes Shear for Flat Steel VPS 1800 Capacity : 1800 kN (180 ton) Width/material thickness (max) : 500 mm/22 mm Hydraulic clamping : yes Mitreshearing : +/- 45° Shear for Angle Steel VHS 1800 Capacity : 1800 kN (180 ton) Suitable for Angle : 50x50x5 up to and included 150x150x15 Hydraulic clamping : yes Punching Unit for Angle Flange Capacity : 600 kN (60 ton) Punchdiameter/material thicknes (max.) : 32 mm / 15 mm Numbering Unit Number of disks : 4 pcs Number of characters : 36 pcs Character hight : 10 mm Number of characters per code : standard max. 16 Inprint : approx 1 mm Electrical power : 3 x 415V AC + N + PE, 50 CPS

Condition: new, NEW ! all stainless steel suitable for eurobins of 200L discharging height : ± 1.150 mm 0,37 kW can be operated from both sides mobile Blodpfx Aqjzg U D Ujtei loading : max. 350 kg dimensions (l x w x h) : ± 1.020 x 1.250 x 1.150 mm

Condition: new, functionality: fully functional, mileage: 1 km, power: 55.16 kW (75.00 HP), fuel type: diesel, color: yellow, empty load weight: 5,500 kg, operation weight: 5,500 kg, maximum load weight: 2,500 kg, lifting power: 2,500 kg/m, lifting height: 4,500 mm, tire condition: 100 %, drive condition: 100 %, chain condition: 100 %, number of seats: 1, emission class: euro5, Year of construction: 2026, operating hours: 1 h, machine/vehicle number: GG2500T, Equipment: additional headlights, cabin, low noise, Telehandler GG2500TEL Telehandler The Gunter Grossmann GG2500TEL is a modern telehandler that combines a powerful engine with exceptional versatility. Powered by a Kunming Yunney Power Euro 5 engine delivering 75 HP, it meets strict emission standards and is designed for demanding tasks under various working conditions. Powerful Engine and Efficient Hydraulics The 75 HP engine works in conjunction with a hydraulic system operating at 16 MPa with an oil flow rate of 90 L/min, ensuring fast, precise, and energy-efficient task execution. The hydraulic setup guarantees smooth boom movements and excellent load control. Lifting Capacity and Durability With an operating weight of 5,500 kg and a rated lifting capacity of 2,500 kg, the GG2500TEL offers stability and safety when handling heavy loads. It has a maximum lift height of 4.5 meters, enabling efficient material transport at significant heights. Versatility in Working Range Equipped with a 1.0 m³ bucket and telescopic boom, it can handle loads from 800 kg (with extended boom) up to 2,500 kg (with retracted boom), offering a broad range of operational flexibility for various applications. Mobility and Compact Dimensions With a top speed of 20 km/h, a wheelbase of 1,550 mm, and a track width of 2,550 mm, the machine delivers excellent stability and maneuverability. Its compact size — 6,270 mm long, 2,100 mm wide, and 2,670 mm high — facilitates easy transport and operation in confined areas. Machine weight: 5,500 kg Engine: Kunming Yunney Power Euro 5 Engine power: 75 HP Bledpfeygnvlex Aqtei Lifting height: 4,500 mm Rated lifting capacity: 2,500 kg Rated speed: 2,400 rpm Hydraulic pressure: 16 MPa Hydraulic oil flow: 90 l/min Standard tyres: 16/70-20 Bucket capacity (m³): 1.0 Max lifting with retracted boom: 2,500 kg Max lifting with extended boom: 800-1,000 kg Maximum speed: 20 km/h Wheelbase: 1,550 mm Track width: 2,550 mm Dumping height: 2,850 mm Bucket capacity at max lift height: 800–1,000 kg Length: 6,270 mm Width: 2,100 mm Height: 2,670 mm

Condition: new, functionality: fully functional, mileage: 1 km, power: 10 kW (13.60 HP), gearing type: automatic, fuel type: diesel, color: yellow, overall weight: 1,000 kg, empty load weight: 1,000 kg, operation weight: 1,000 kg, tire condition: 100 %, drive condition: 100 %, chain condition: 100 %, number of seats: 1, first registration: 07/2026, emission class: euro5, shovel volume: 0.2 m³, digging bucket width: 4,200 mm, Year of construction: 2026, machine/vehicle number: GT1000, Equipment: additional headlights, adjustable boom, adjustable chassis, steel tracks, GT1000 mini excavator Mini excavator The GT1000 mini excavator is a lightweight and exceptionally maneuverable machine weighing 1000 kg, designed for precise earthmoving, installation work, and landscaping. Thanks to its compact dimensions, this machine is ideal for locations with limited space, such as private plots, narrow passages, or work inside buildings. Engine The machine is equipped with a reliable Yanmar 3TNV70 engine that meets the EURO 5 emission standard. The engine, with an output of 13.6 hp (10 kW), ensures stable, quiet, and fuel-efficient operation, which guarantees high reliability and a long service life. Work equipment and operation The GT1000 mini excavator features a precise hydraulic system that is operated via ergonomic joysticks. The counter-cylinder on the boom provides extra protection for the working parts and increases safety during operation. The standard bucket with a width of 420 mm and a capacity of 0.02 m³ enables precise digging work. Working range The GT1000 offers a maximum digging depth of 1680 mm and a maximum digging height of 2490 mm. The dumping height is 1760 mm, and the maximum digging reach on the ground is 2430 mm, ensuring efficient execution of basic earthworks. Maneuverability The minimum digging radius is 1340 mm, and the turning radius of the platform is only 733 mm, ensuring very good maneuverability in tight spaces and easy operation of the machine. Dimensions The total length of the machine is 2650 mm, the total width is 930 mm, and the total height is 2200 mm. Thanks to its compact design and extendable tracks, the machine is easy to transport and deploy in confined spaces. Technical data Model GT1000 Engine Yanmar 3TNV70 EURO 5 Weight 1000 kg Power 13.6 hp Bucket width 420 mm Bucket capacity 0.02 m³ Joystick Yes Counter-cylinder on the boom Yes Swivel boom Yes Extendable tracks Yes Max. digging reach on the ground 2430 mm Bedpfx Aqezifkqjteli Max. digging depth 1680 mm Max. digging height 2490 mm Max. dumping height 1760 mm Turning radius 1190 mm Min. digging radius 1340 mm Max. lifting height dozer blade 175 mm Total length 2650 mm Total height 2200 mm Total width 930 mm Total track length 1100 mm Platform swing radius 733 mm Ground clearance upper structure 380 mm Undercarriage width 950 mm Track width 180 mm Track width 320 mm

Condition: new, functionality: fully functional, power: 18.39 kW (25.00 HP), gearing type: automatic, fuel type: diesel, color: yellow, overall weight: 1,520 kg, empty load weight: 1,520 kg, operation weight: 1,520 kg, maximum load weight: 600 kg, lifting power: 600 kg/m, tire size: 26x12.00-12, tire condition: 100 %, drive condition: 100 %, chain condition: 100 %, axle configuration: 2 axles, number of seats: 1, first registration: 07/2026, emission class: euro5, shovel volume: 0.3 m³, digging bucket width: 1,140 mm, Equipment: additional headlights, all wheel drive, Articulated loader GG06N – the new version of the GG06 series Modern design and even more functionality The GG06N articulated loader is the new generation of the popular GG06 series, designed for users who expect reliability, compact dimensions, and high work performance. The updated design goes hand in hand with an optimized construction, which proves to be excellent in construction work, in agriculture, and in municipal services. Powerful engine and proven technology The GG06N model is equipped with a 3-cylinder engine from the renowned Perkins brand with an output of 25 hp. This power unit offers an optimal combination of power and fuel efficiency, ensuring economical and sustainable operation. This is a solution designed for work under demanding conditions. Hydraulics and work performance The efficient operation of the attachments is provided by an Italian PWG hydraulic pump with a capacity of 36 l/min and a working pressure of 16 MPa. The loader offers a loading capacity of 600 kg and a bucket volume of 0.3 m³, making it ideal for daily loading and transfer operations. The maximum lifting height is 2.6 meters, which enables comfortable work at different heights. Compact dimensions and mobility Thanks to its dimensions of 3325 mm in length, 1155 mm in width, and 2360 mm in height, the GG06N remains extremely maneuverable and easy to operate. The low unladen weight of 1520 kg and the tire size 26×12.00-12 ensure stability and good grip, even on difficult terrain. Speed and versatility A maximum speed of 18 km/h enables quick movement around the work area, which significantly increases efficiency. The GG06N articulated loader is a versatile machine that combines compactness with great capabilities – ideal for professionals who value performance and reliability. Technical data Bucket volume 0.3 cbm Loading capacity 600 kg Machine weight 1520 kg Engine PERKINS Engine model PERKINS403J-11 Number of cylinders 3 Engine power 25 HP Hydraulic pump PWG Italy 36L per minute Hydraulic pressure 16 MPa Tire size 26x12.00-12 Lifting height 2.6 m Speed 18 km/h Bodpfx Aqszifi Hetsli Length 3398 mm Width 1140 mm Height 2370 mm

Condition: used, Dr. Wiesner Type: INTEGRA DDV -1...1 bar Item Description: Dr. Wiesner Integra leak testing system The classic – for all common testing methods The leak testing system for industrial leak and flow tests with a fully graphic color display up to three independent test circuits can be operated 255 test programs can be stored automatic process optimization autoTune (option) Communication via flexibly interchangeable bus coupling modules freely programmable fixture control freely programmable special test sequences The device is suitable for tests using the relative and differential pressure methods with overpressure. Special versions: none Technical data: Electrical supply: 110 ... 230V~; 50 ... 60Hz (connection via power cable to plug XO) Pneumatic: clean and dry compressed air max. 7 bar (to connection P) Pressure range: 0 ... 1000 mbar, electronically controlled Measuring ranges Relative pressure: 0 ... 1000 mbar Differential pressure: +20 mbar Resolution: 0.1 Pa Internal volume: 13 cm³ test circuit 15.0 cm³ reference circuit Electrical interfaces: 3x serial RS232 (COM1; COM2; COM3) Blodpfx Aeziiv Deqtei 1x digital I/O (X1) Pneumatic: Connection for test object (Test) Connection for reference circuit (Ref.) Housing Degree of protection: IP40 Dimensions: 450x185x380mm (WxHxD) Weight approx. 15.5kg Condition: used (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by telephone.

Condition: used, axle configuration: 3 axles, first registration: 12/2006, total length: 13,200 mm, total width: 2,520 mm, total height: 2,900 mm, suspension: air, tire size: 245/70R17,5, color: other, Year of construction: 2006, Equipment: ABS, = Further options and accessories = - EBS = Notes = Number of axles: 3, twin tires, payload: 33,700 kg, tare weight: 11,300 kg, gross weight: 45,000 kg, chassis type: complete chassis, chassis material: steel, kingpin size: 2 inch, suspension type: full air, ABS, EBS, body year: 2006, low loader type: semi low loader, loading platform length: 800 cm, gooseneck length: 390 cm, extendable chassis: center, extendable length: 580, axle type: SAF = Further information = General information Cab: day cab License plate: OJ-04-NP Bledpfxoy Ad R Ss Aqtsi Drivetrain Fuel type: Diesel Transmission Gearbox: manual Axle configuration Tire size: 245/70R17.5 Brakes: drum brakes Suspension: air suspension Axle 1: twin tires; left inside tire tread: 5 mm; left outside: 6 mm; right inside: 7 mm; right outside: 6 mm Axle 2: twin tires; left inside: 4 mm; left outside: 4 mm; right inside: 9 mm; right outside: 7 mm Axle 3: twin tires; left inside: 4 mm; left outside: 4 mm; right inside: 7 mm; right outside: 5 mm Weights Unladen weight: 11,300 kg Payload: 33,700 kg GVW: 45,000 kg Environment Emission class: Euro 0 Condition General condition: average Technical condition: average Visual appearance: average Damages: none = Company information = Kleyn Trucks is one of the world’s largest independent dealers in used vehicles. Here, you can choose from a constantly changing stock of 1,200 used trucks, tractor units, and trailers. Our range includes all European brands, years of manufacture, and price categories. Why buy from Kleyn Trucks? Simple! • Large, rapidly changing stock • Recognizable quality • Great prices • Reliable business practices • We speak many languages • We understand our customers • Assistance with import and transport • (Export) license plates are quickly arranged • Expert technical services • The certainty of 'recognizable quality' • And more… Please visit our website for special offers and our complete inventory: Leasing through Kleyn Trucks is possible in most European countries! Quickly calculate your lease rate and send a request via our website. Ask directly about our European warranty package.

Condition: used, Year of construction: 1998, OVERVIEW This ABC 4HA-4-LT high-pressure reciprocating air compressor, manufactured in 1998, is designed for the supply of compressed air in PET bottle blowing applications. The compressor is manufactured by ABC – Arizaga, Bastarrica y Cía S.A. from Eibar, Spain. The machine is a 4-stage reciprocating compressor with oil-free cylinder compression design and a nominal pressure of 42 bar. It is belt-driven. The compressor is mounted on a structural steel skid and includes interstage piping, pressure monitoring, cooling water connections, main drive motor, belt-drive safety guard and integrated control cabinet. The machine is equipped with an analog pressure gauge panel showing the final stage, intermediate stages and oil pressure. The control cabinet is fitted with status lamps for temperature, water, oil, thermal relay and dryer fault indications, as well as an hour meter and emergency stop.   TECHNICAL DATA - Manufacturer: ABC – Arizaga, Bastarrica y Cía S.A. - Manufacturer Location: Eibar, Spain - Model / Type: 4HA-4-LT - Machine Type: High-pressure reciprocating air compressor - Year of Manufacture: 1998 - Application: High-pressure compressed air supply for PET bottle blowing - Compression Design: Oil-free cylinder compression - Number of Compression Stages: 4 stages - Nominal Pressure: 42 bar - Regulation Air Pressure: 8 bar - Suction Pressure: Not specified - Flow Rate: approx. 546.9 m³/h - Compressor Speed: 725 rpm - Motor Power: 150 CV / 110 kW - Total Power to Install: 158 HP / 115 kW - Transmission: Belt-driven - Power Voltage: 380 V - Control Voltage: 220 V - Frequency: 50 Hz - Cylinder Diameter, 1st Stage: 250 mm - Cylinder Diameter, 2nd Stage: 160 mm - Cylinder Diameter, 3rd Stage: 105 mm - Cylinder Diameter, 4th Stage: 75 mm - Piston Stroke: 150 mm - Cooling System: Water-cooled Bedpfx Aoziawreqtjli - Cooling Water Flow Rate: approx. 6.5 m³/h - Ambient Temperature Range: 0 – 40°C - Cooling Water Temperature Range: 5 – 40°C - Compressor Weight: approx. 2,900 kg - Motor Weight: approx. 830 kg - Complete Equipment Weight: approx. 7,230 kg - Pressure Gauges Observed:Final stage: approx. 42 bar 3rd stage: approx. 16 bar 2nd stage: approx. 6 bar 1st stage: approx. 2 bar Oil pressure: approx. 3.5 bar - Control Cabinet: Integrated electrical control cabinet, marked T2/7 - Operator Elements: Status lamps, analog hour meter and emergency stop - Status Indications: Temperature, water, oil, thermal relay and dryer fault - Safety Equipment: Belt-drive / flywheel safety guard and emergency stop - Construction: Green painted multi-stage compressor on structural steel skid - Additional Equipment Observed: Interstage header pipework, vertical separator / receiver vessel and overhead piping - Certification: CE-marked - Condition: Used, installed in industrial production environment

Condition: ready for operation (used), Rösler PP 000620 diaphragm pump, serial number: G070301 - 8.3 bar, used, in good condition, 100% functional, scope of delivery as shown in the photos. Bsdpfx Aqezh Sduetoli

Condition: ready for operation (used), Rösler 200021314 diaphragm pump, serial number: K261001 - 8.3 bar, used, in good condition, 100% functional, scope of delivery as shown in the photos. Bljdjzh Sdnepfx Aqtei

Condition: used, power: 109 kW (148.20 HP), fuel type: diesel, axle configuration: 4x4, first registration: 06/2012, Year of construction: 2012, Equipment: all wheel drive, onboard computer, = Additional Options and Accessories = - Central lubrication system = Further Information = Bodpfx Aoy Tw Npjqteli Number of cylinders: 6 Engine displacement: 6,700 cc Unladen weight: 12,000 kg Dimensions (L x W x H): 723 x 255 x 326 cm Chassis type: Articulated Loading shovel capacity: 2 m³ Registration number: TJD-40-J Please contact Vitali Lenda for further information.

Condition: excellent (used), color: red, Year of construction: 2022, Technical condition: very good Visual appearance: very good Production country: TR Please contact Vink Machinery for more information Lider Lowbed low loader * 2022 * Three axles * Double hydraulic adjustable ramp * Fixed neck * Double wheel well * Steering rear axle * Registration number OT-93-KZ * Price: €37,500 Scania R450 * 2014 * Lift/steering axle * 929,923 km * Euro 6 * Registration number 25-BDS-3 * Periodic vehicle inspection valid until April 1, 2026 Bljdpfezg N Aljx Aqtji * Price: €19750

Condition: used, mileage: 472,079 km, power: 235 kW (319.51 HP), first registration: 04/2016, fuel type: diesel, tire size: 315/70R22.5, axle configuration: 4x2, wheelbase: 5,500 mm, fuel: diesel, color: white, gearing type: automatic, emission class: euro6, suspension: air, loading space length: 7,690 mm, loading space width: 2,480 mm, loading space height: 2,620 mm, Year of construction: 2016, Equipment: air conditioning, electric window regulation, spoiler, tail-lift, Tyre size: 315/70R22.5 Suspension: air suspension Rear axle: Double wheels Drive: Wheel Number of cylinders: 6 GVW: 19.000 kg Make of engine: Renault Tail lift: BAR CARGOLIFT, slider lift Blsdpfxjzhll Se Aqtei = Additional options and accessories = - Roof spoiler

Condition: used, functionality: fully functional, machine/vehicle number: BME8879, Year of construction: 2020, operating hours: 3,880 h, load capacity: 2,500 kg, lifting height: 3,500 mm, fuel type: electric, mast type: simplex, construction height: 2,350 mm, fork length: 800 mm, empty load weight: 4,970 kg, total length: 3,000 mm, drive type: Elektro, construction width: 1,500 mm, Four-way side loader Chassis number: BME8879 Fork width: 125 mm Fork thickness: 45 mm Mast type: Standard Condition: Ready for use and fully functional Technical condition: good Front tire type: Solid tires Front tire size: 2 x 343x135 Front tire condition: 40 - 60% Rear tire type: Solid tires Rear tire size: 4 x 250 x 80 Rear tire condition: 40 - 60% Battery voltage: 48V Battery capacity: 620Ah Battery year of manufacture: 2020 Bljdszhyqpepfx Aqtoi Description: In addition to this MAKE - MODEL, we have approximately 150 heavy-duty forklifts, container stackers, reach stackers, forklifts & terminal tractors in our Oldenburg warehouse. Visit our website - hinrichs-Forklifts. Leasing, lease-purchase, and financing at fair terms are always possible for us. We would also be happy to buy your used equipment outright, even if you do not purchase a vehicle from us. Call me, Marco Levermann, and I will be happy to provide you with detailed information about this MAKE - MODEL. By the way, our specialist forklift workshop is specialized in the repair and maintenance of large equipment from 8 tons upwards. We would also be happy to offer your vehicle for sale on consignment.

Condition: used, axle configuration: 2 axles, first registration: 02/1996, suspension: air, tire size: 265/70 R 19.5, wheelbase: 5,000 mm, Year of construction: 1996, = Additional Options and Accessories = - Air suspension = Additional Information = Bljdpfx Aqszhvq Eotoi Axle configuration Tire size: 265/70 R 19.5 Axle brand: BPW Brakes: Drum brakes Suspension: Air suspension Front axle: Dual tires; Steerable; Tire tread depth left inside: 80%; Tire tread depth left outside: 80%; Tire tread depth right inside: 80%; Tire tread depth right outside: 80% Rear axle: Dual tires; Tire tread depth left inside: 65%; Tire tread depth left outside: 65%; Tire tread depth right inside: 65%; Tire tread depth right outside: 65% Weights Unladen weight: 4,600 kg Payload: 15,400 kg GVWR: 20,000 kg Functional Loading platform height: 105 cm Condition Damage: none Identification License plate: WP-66-LH

Condition: used, axle configuration: 2 axles, first registration: 02/2006, loading space length: 6,780 mm, loading space width: 950 mm, loading space height: 300 mm, total width: 2,550 mm, suspension: air, tire size: 215/75R17.5, color: other, Year of construction: 2006, LECINENA SR-2E BOAT TRAILER Loading platform 6.78 + 4.27 m, extendable 6 boat support legs = Further information = Tire size: 215/75R17.5 Suspension: Air suspension Front axle: Dual tires; tire tread depth left inner: 50%; tire tread depth left outer: 50%; tire tread depth right inner: 50%; tire tread depth right outer: 50% Rear axle: Dual tires; tire tread depth left inner: 50%; tire tread depth left outer: 50%; tire tread depth right inner: 50%; tire tread depth right outer: 50% Bedpfxozibxqs Aqteli Unladen weight: 5,560 kg Payload: 11,440 kg GVW: 17,000 kg APK (Technical Inspection): valid until 03/2027 Model number: LECINENA SR-2E / BOAT TRAILER / = Company information = ALL PRICES ARE NET FOR EXPORT, Joris Versteijnen (NL-DE-GB) Wouter Greutink (NL-DE-GB-ES-IT) Govorim po ryccki. We make every effort to provide correct information, but no rights can be derived from the information provided.

Condition: new, new Bljdpezdn Uhsfx Aqtsi all stainless steel discharging height ± 1.770 – 2.250 mm chain break system 400V – 50 Hz Motor 1.1 kw mobile