Used Shop Counter for sale (9,823)

Condition: new, Year of construction: 2025, functionality: fully functional, total height: 5,600 mm, total length: 11,200 mm, total width: 5,100 mm, type of input current: three-phase, warranty duration: 24 months, inner dimension height: 4,970 mm, inner dimension length: 11,000 mm, temperature: 80 °C, inner dimension width: 5,000 mm, air demand: 52,000 m³/h, input voltage: 380 V, heating capacity: 250 kW (339.91 HP), power: 45 kW (61.18 HP), fuel: liquid petroleum gas (LPG), input frequency: 50 Hz, energy consumption: 45 kWh, insulation thickness: 50 mm, nominal power: 250 kW (339.91 HP), sheet thickness steel (max.): 2 mm, Equipment: lighting, * Air Preparation Unit: The air preparation unit is a recirculation system that supplies the cabin with filtered fresh air and exhausts used air during the painting process. It heats the air to 60 °C, mixes the used air with 10% fresh air via an automatic multi-damper system, and reheats the air before routing it back into the cabin. The air is heated using a burner and a heat exchanger, both made of high-quality 304 stainless steel and housed within the fresh air unit. During painting, the air is filtered twice (via front and ceiling filters) before it enters the cabin. The contaminated air is also filtered twice (through inlet and outlet filters) before it exits via the exhaust unit. Air preparation units are insulated like the side walls to minimize heat loss and are protected against potential vibration and noise thanks to rubber seals on the covers. The exhaust air is regulated by a damper in the outlet duct, which helps control the internal pressure of the cabin. * PRINCIPLES OF CABIN OPERATION: The processes in the cabin are controlled via a control panel that manages the following steps: Cjdpfx Adowzl Hxjxshd * PAINTING PROCESS: During painting, 100% fresh air is drawn in from outside and passed through front filters before entering the distribution chamber at ambient temperature. The air is then expelled by the extraction unit. Floor filters (paint stops) capture paint particles, and the air passes through the final exhaust filters before being discharged. * FLASH-OFF PROCESS: After painting, the cabin operates for approximately 15 more minutes to purge residual solvents and thinners. During this phase, fresh air from outside continues to circulate in the cabin. * DRYING PROCESS: In this phase, 80% of the air passing through the cabin is heated to 60 °C and supplied to the cabin via a distributor. As 20% of the solvent is released during drying, these solvents are expelled with the exhaust air. Industrial coatings are typically dried at 60 °C, but the cabin temperature can be adjusted via the control panel as required. * COOLING PROCESS: After the 30-minute drying process, the coil is deactivated via the control panel, the pneumatic damper closes, and the extraction system restarts. During the 5-minute cooling phase, fresh air from outside circulates in the cabin, after which the system stops automatically. ELECTRICAL AND ELECTRONIC EQUIPMENT: These control panels manage the functions and operation of all machinery and devices inside the cabin. The control panel is constructed from durable galvanized sheet metal and steel profiles and is fully enclosed to protect against dust and moisture. Electrical devices and control panels: • The control panel contains essential components such as circuit breakers, fuses, indicator lamps, thermal relays, contactors, and connectors. • Heat-resistant cables are used for command and control lines between the panel and motors or other electrical devices. • Electrical wiring is designed to allow for cabin relocation if necessary. • Operating devices use 380 V 50 Hz, while control devices use 220 V.

Condition: good (used), Counting scale, scale, digital scale, market scale, shop scale, price calculation scale -Manufacturer: EXA, market scale shop scale -Type: E 10 -Weighing range: max. 10 kg -Display:Price / kg / Tare, double-sided display Chsdpfxsw S T D Ee Adxed -Dimensions: 320/310/H120 mm -Own weight: 3 kg

Year of construction: 2018, condition: used, functionality: fully functional, We are offering a WiHA circulating air refrigerated display case in XXL format as a free-standing 230V unit. Description: Snack counter circulating air refrigerated display case with a recessed chilling well for cooling purposes. Open on the customer side with air curtain and sneeze guard. The rectangular glass construction is made of insulating glass. The snack counter features six individually illuminated and height-adjustable glass shelves. The recessed cooling surface is ideally suited for beverages. Commercial unit intended for indoor installations (canteens, break rooms, gas stations, kiosks, educational facilities, trade fair presentations). Perfect for promoting the sale of your products (salads, delicatessen, snacks, dairy products, sandwiches, and much more). RRP €14,000 net. You will receive an invoice with VAT shown separately. Condition: Used Dimensions: Snack Counter (free-standing): W x D x H: 145 cm x 73 cm x 210.5 cm with lighting Base frame: W x D x H: 145 cm x 73 cm x 10 cm Glass shelf display surface: W x D: 68 cm x 37 cm 6 units with lighting, height adjustable Recessed display area: W x D: 136 cm x 50 cm Shelves removable Technical data: See photo. Our pre-owned equipment service for you: - 6 months warranty on all electrical components - High-quality brand equipment at fair prices - Professional overhaul/inspection & expert cleaning - Inspected & fully functional – or your money back - Flexible choice of shipping or collection - Expert advice before and after purchase - Provision of user manuals, wiring diagrams & spare parts - Inspection according to DGUV V3 Shipping: Delivery or collection by arrangement Worldwide shipping on request Shipping to islands or mountain stations only by prior agreement Cjdpfx Adjw U Tcaexjhd Do you have questions, need advice, or would like to view the unit in person? You can reach us by phone during our opening hours: Monday-Friday 09:00 - 13:00 and 14:00 - 17:00. Sale is subject exclusively to our General Terms and Conditions (GTC).

Condition: excellent (used), Easycount CD5 tablet counter Cjdeiy Nngepfx Adxohd Serial: 51002040 Stainless, easycount will make a precise inventory of all hard and soft gelatin capsules and most sizes and shapes of tablets, fill all kinds of containers exactly and automatically, check number of full containers at any time and identify how many pieces have been counted in the last and incomplete containers, 1Ph

Condition: good (used), 703 USED Fridrich 60x80 oven with proofer. EXTERNAL DIMENSIONS (in cm): - W: 90, - L: 195, - H: 206, CHAMBER DIMENSIONS (in cm): - width 60, Csdperdvkkefx Adxjhd - depth 130. EQUIPMENT: - 5 chambers - hood - fogging of each chamber - proofer 60x120 cm The device is available to verify in our warehouse (36-068 Bachórz, Poland). Paid options available: renovation / transport / assembly / commissioning of the device. The price is a net price. Our languages: ENGLISH, FRENCH, GERMAN.

Condition: used, Year of construction: 1994, functionality: fully functional, Listing for Machineseeker – Used CEFLA Painting Line (Fully Functional) For sale is a complete, fully operational painting booth system, dismantled from a used production line. Manufacturer: CEFLA – premium industrial equipment for professional finishing applications. System Components: 1 pc. conveyor belt • Length: approx. 1,900 mm • Belt width: 1,400 mm • Belt speed: 1.7 – 10.7 m/min 2 pcs. conveyor belts • Length: approx. 3,000 mm each • Belt width: 1,400 mm • Belt speed: 1.7 – 10.7 m/min 1 pc. UV drying tunnel with 2 lamps • Length: approx. 3,020 mm 1 pc. UV drying tunnel with 4 lamps • Length: approx. 3,530 mm 1 pc. CEFLA EASY 2000 automatic spray coater Condition: Used, fully operational Regularly serviced Immediately available for operation Application Area: Ideal for industrial coating and drying workflows, e.g., in furniture or wood product manufacturing. Additional Information: Inspection possible by appointment Chedpexdwi Isfx Adxjd

Condition: used, functionality: fully functional, mileage: 47,380 km, power: 88 kW (119.65 HP), fuel type: diesel, gearing type: mechanical, overall weight: 3,500 kg, first registration: 02/2020, next inspection (TÜV): 01/2027, loading space length: 3,500 mm, loading space width: 2,100 mm, loading space height: 2,100 mm, emission class: euro6, fuel: diesel, Equipment: ABS, soot filter, Food Truck Sprinter Mercedes Top Mint. The following equipment is installed: 2 m extractor hood. Hygiene package with double sink, boiler and water on a canister system Electrical fuse box. Led swivel spotlight High glass refrigerator. Industrial cast material floor in the shape of a tub installed in accordance with hygiene regulations. 2 x retro lighting for your price board in the front. Stainless steel cladding Further equipment possible according to customer requirements Installation of catering equipment/gas system Furniture installation and labeling possible by us. Chjdpfsvvl D Isx Adxjd We would also be happy to provide you with financing offers for your food truck. “Leasing for start-ups and young entrepreneurs” possible!! We are a 2nd generation vehicle construction master specialist company. Over 30 years of experience in vehicle construction for mobile sales!!!! 1 year warranty on engine and gearbox optional. (Application Germany) More vehicles on our website. w w w . Helmig-Verkaufsfahrzeuge.de Inquiries are also welcome. Constantly more vehicles in stock!!! This vehicle is available from. Possible to be sold between now and then. We are also happy to deliver your vehicle nationwide/Austria and Switzerland. (subject to additional charge)

Condition: excellent (used), functionality: fully functional, Complete equipment for an industrial paint shop: - Dry wall with extraction system and filters - Mechanical conveyor for painted parts with hooks (modular construction, adjustable to the room) - WAGNER painting unit The paint shop was used for painting window frames. Codoxmr Tyopfx Adxehd

Condition: good (used), Year of construction: 1995, machine/vehicle number: B 2575, Offer 23348 Technical data: - max. load capacity 1500 kg Chodpfx Aorkmaajdxod - Flat plate diameter 850 mm - Distance from floor to center of rotation axis 800 mm - Rotation electr. infinitely variable 0.08 - 1.6 rpm - Right + left rotation - Welding current transmission approx. 700 A - Drive 400 V / 2.2 kW - Space requirement attached unit approx. W 850 x H 1450 x D 1000 mm - Space required for co-rotating unit W 850 x H 1450 x D 1000 mm - Weight driven unit approx. 550 kg - Weight of rotating unit approx. 400 kg

Condition: like new (used), Duramax Shopfloor 2015 Measuring range: X=500mm, Y=500mm, Z=500mm Length measuring error E0 in µm E0/E40 in µm MPE according to ISO 10360-2:2009 2.4 + L/300 at 18°C - 22°C C99 controller with BP26_SE control panel Basic equipment: Shopfloor base frame VAST XXT sensor Probe change magazine Probe changer plate Calibrating sphere with certificate Machine folder, device documentation, operating instructions Chedpfxew N Nfge Adxed various probes HP Workstation Z4 WIN 11 and monitor additional accessories with various configurations Software: Calypso Basic 2025 Further options available

Condition: excellent (used), We have a large quantity of these identical units. They have come from the corporate hospitality areas of Wembley Stadium. Cedpfeu S E Tvsx Adxohd

Condition: ready for operation (used), Bander stacker Chjdpfx Adsir A Nvsxsd

Year of construction: 2007, condition: excellent (used), 704 USED Wachtel Piccolo oven with proofer. EXTERNAL DIMENSIONS (in cm): - W: 117, - L: 155, - H:226, CHAMBER DIMENSIONS (in cm): - W: 80, - L: 67. EQUIPMENT: - 3 chambers - hood - steaming of each chamber The device is available to verify in our warehouse (36-068 Bachórz, Poland). Paid options available: renovation / transport / assembly / commissioning of the device. The price is a net price. Our languages: ENGLISH, FRENCH, GERMAN. Cjdpfx Aderdvnnsxshd

Condition: new, mileage: 10 km, power: 103 kW (140.04 HP), fuel type: diesel, gearing type: mechanical, wheelbase: 4,035 mm, overall weight: 3,500 kg, empty load weight: 2,400 kg, maximum load weight: 1,100 kg, loading space length: 4,000 mm, loading space width: 2,250 mm, loading space height: 2,300 mm, emission class: euro6, color: white, suspension: steel, fuel: diesel, Equipment: ABS, air conditioning, airbag, central locking, cruise control, electronic stability program (ESP), onboard computer, Peugeot Boxer 335 L4 BlueHDi140 Euro6 New vehicle platform chassis incl. box body in white Mileage 5 km Fuel Diesel kW/hp 103/140 Manual gearbox 6 gear ccm 2.179 cm³ 3500kg Driving license class B Platform chassis, particulate filter, air conditioning, cruise control, daytime running lights, reversing camera, all-season tires, ESP, ABS, on-board computer, heated mirrors, electric windows, central locking with remote control, emission class (NFZ): Euro 6, COC papers. Box body made of GRP Superlight in sandwich construction with alcove with a large sales flap on the right side of the truck. 3-seater, driving license class B, rear running board, LED lights, reversing camera, non-slip industrial floor R11. Various platform chassis are available (Fiat, Citroen, Peugeot, Renault). Box body interior dimensions WDH 4000 x 2250 x 2300 mm Side flap 3770 x 1480 mm Permissible total mass 3,500 kg / driving license class B Empty weight 2,480 kg Chedpfepq S Ddjx Adxed Interior fittings and paintwork on request. Perfectly suited for a food truck, sales van, snack van, promotion etc. Price: 43,875.00 Euro net plus VAT We offer you customized lightweight box bodies on new or used chassis in various body lengths. The body and interior are always customized to your individual needs, from function to design.We produce ourselves and in Germany. Our many years of experience and our broad-based service offer you a great deal of flexibility in the implementation of your idea.Every project has its own ID.

Condition: ready for operation (used), machine/vehicle number: J000028559, Condition Used Stock Number 58759/SR8B This listing is for a Merck Millipore Scepter 3.0 Automated Cell counter  The unit is in full working condition and is ready for immediate release Cedjwdbpzepfx Adxshd The Scepter™ 3.0 Cell Counter is the only automated cell counter that's both portable and handheld. This compact device brings the accuracy and consistency of Coulter impedance counting directly to your culture hood, eliminating the need for bulky benchtop equipment. While traditional automated counters rely on vision-based systems, object recognition software, manual focusing, and clunky loading chambers, the Scepter™ 3.0 avoids all of these issues. It offers true automation without the risk of human or software error. Featuring a microfabricated, precision-engineered sensor, the Scepter™ 3.0 handles all aspects of cell assessment and calculation, delivering accurate and reliable counts in under 30 seconds. Features: Handheld, portable, and ergonomic design Uses the Coulter Principle for precise, reproducible results Compatible with two sensor sizes (40 μm and 60 μm) Displays cell concentration, average size, average volume, and histograms Stores up to 999 counts for PC download and further analysi

Condition: new, Year of construction: 2025, Small and compact desktop counting machine for counting tablets/pills with regular or irregular shape, capsules and solid granules in the sense of tablets similar products such as candies. Also suitable for gel and gelatin capsules: After receiving samples, we can check and, if necessary, confirm the ability to run. Filling into bottles, cans, jars. The counter is equipped with dust resistance photoelectric detection technology and multi detection and alarm control functions. The 4 tracks vibration feeding device ensures evenly feeding and no breakage of product. The structure and design of the hopper prevents jamming of the products. Control via touch screen interface, menu in English available. - Specifications: Number of vibrating tracks: 4; capacity: max. 30 fillings/minute, depending on product, shape and quantity of the product; working range: adjustable from 2-9999 per container; error rate: = 0.2%; tablets/pills: min. Ø 5.5mm, max. Ø 35mm; capsules: 00-05#; compressed air: 6bar; power: 220V, 0.6kW; all the parts in contact with the product are made of Stainless Steel 316, other made of Stainless Steel 304; machine dimensions LxWxH: 610x1280x780mm; weight: 115kg. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty. Chsdpjv Nk H Uofx Adxed

Condition: ready for operation (used), Counter Stackers Cedpfx Aoir A Nysdxjhd Palamides Alpha 800 -2003

Condition: ready for operation (used), Condition Used Stock Number 413093 This listing is for a Climet CI-754-03 Portable Airborne Particle Counter. The unit is in full working condition and is ready for immediate release. This unit is supplied with: Protective carry case, tubing, cables and more. Please see images. The Climet CI-754-03 Portable Airborne Particle Counter is an excellent choice for cleanroom environments, offering comprehensive features for particle counting and air quality assessment. Here’s a detailed overview of its capabilities and specifications: Key Features: Chedpfxovyvthj Adxod Sample Flow Rate: 75 LPM, ensuring efficient sampling of airborne particles. Particle Measurement Channels: Measures particles in four sizes: 0.3 μm, 0.5 μm, 1 μm, and 5 μm, allowing for versatile monitoring. Standards Compliance: Fully compliant with ISO 21501-5 for accuracy and performance. Exceeds ISO 21501-4 standards with a count efficiency of 50% and accuracy of less than ±10%. Specifications: Count Efficiency:100% for laser o Count compliant with ISO ernal Printing: Enables immediate data recording and aning Compatibility: Can withstand common sterilization processes, including VHP (Vaporized Hydrogen Peroxide).Programs and Memory:User Programs: Supports up to 30 user-defined programs, helping tailor the device to specific operational ple Memory: Stores data for 3000 samples, including critical information such as date, time, particle counts, and a Transfer: Easy transfer to a PC via RS232, Ethernet, or USB jump drive. Security Features: Authentication: Four security levels with user authentication, accommodating up to 20 user IDs plus a supervisor level with password ation Identification: Store up to 100 location IDs per program, each allowing for 16 ning Capability: Supports cloning for seamless data transfer between units and PCs via USB flash drives, enhancing operational efficiency. Applications: Ideal for environments where air quality is critical, including pharmaceutical manufacturing, semiconductor fabrication, and any cleanroom requiring rigorous particle monitoring.

Condition: new, Year of construction: 2025, This machine is suitable for counting of candies, biscuits, nuts, vegetables, plant bulbs, and most solid granules. The counter is equipped with dust resistance photoelectric detection technology and multi detection and alarm control functions. The 8 tunnels vibration feeding device ensures an evenly feeding and no breakage of product. The structure and design of the filling hopper prevents that the products getting jammed. Control via touch screen interface, menu in English available. - Specifications: number of vibrating tracks: 8; capacity: according to customers samples, containers and filling quantity; working range: adjustable from 2-9999 per container; product sizes: min. Ø 5.5mm, max. Ø 38.5mm; large infeed hopper; compressed air: 6bar; power: 220V, 0.6-1.7kW; all the parts in contact with the product are made of Stainless Steel 316, other made of Stainless Steel 304; machine dimensions LxWxH: customized; weight: approx. 350kg. Chedev Nk Irspfx Adxjd Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.

Condition: ready for operation (used), Presser bander stacker delivery Chjdpsq Tfacefx Adxsd

Condition: new, Year of construction: 2025, Small compact desktop counting machine, stainless steel (SS304) version. Counting 1-100 pcs into bottles, cans, etc. Operation through elektromagnetic vibration: tablets are falling into the counting plate which then turns and release the required number of tablets to the outfeed into the bottle or other container. By changing the counting plates the size and number of tablets can be changed. Low noise and easy operation. - Specification: Speed: max. 20 fillings/min; 220V, 180W; machine dimensions: L600xW500xH700mm; weight: 50kg. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty. Chsdpev Nk Ilefx Adxod

Condition: ready for operation (used), To suit any saddle stitcher, Price £3,000  IN STOCK Codpfx Aeir E R Ujdxshd

Year of construction: 2025, condition: new, This machine is suitable for counting of candies, biscuits, nuts, vegetables, plant bulbs, and most solid granules. The counter is equipped with dust resistance photoelectric detection technology, multi detection and alarm control functions. The 4 tunnels belt feeding device ensures an evenly feeding and no breakage of products. The structure and design of the filling hopper prevents that the products getting jammed. Control via touch screen interface, menu in English available. - Specifications: number of feeding tracks: 4; capacity: according to customers samples, containers and filling quantity; working range: adjustable from 2-9999 per container; product sizes: min. Ø 10mm, max. Ø 60mm; large infeed hopper; compressed air: 6bar; power: 220V, 0.6-1.7kW; machine dimensions: LxWxH customized. The image shows the 8-line version. Cedpfxov Nk I Ej Adxshd That machine/system is available in different versions for different packaging sizes and with different packaging speeds. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.

Condition: new, Year of construction: 2025, This machine is suitable for counting of candies, biscuits, nuts, small vegetables such as peas, beans, and most solid granules. The counter is equipped with dust resistance photoelectric detection technology, multi detection and alarm control functions. - Specifications: number of feeding tracks: 1; capacity: max. 1200 pcs/min (subject to the size and shape of the products and accuracy requirements); product sizes: min. Ø 1mm, max. Ø 30mm; accuracy = 99,9% (subject to the type of products and counting speed); large infeed hopper; compressed air: 6bar; power: 220V, 0.5kW; machine dimensions: L900xW400xH800mm, weight: 70kg. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty. Chedpfx Aov Nk Ncedxod

Condition: new, Year of construction: 2025, Sample system with 10 disc auto counters and a standard bag packaging machine. Suitable to count small parts like screws, fittings, candies, nuts, etc. and pack programmable assortements into pillow or 3-/4-side seal bags. - Systems can be customized regarding the number and size of the counting discs (this samples contains 10 counting discs !). - Packaging machine size and also the total final costs do depend on the required speed , the products to be packed and the bag size. - Available in stainless and painted steel. - Price for sample system only. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty. Chodpsv Nmhnefx Adxsd