Used Shop Counter for sale (9,823)

Condition: new, Year of construction: 2025, Sample system of a weigh-counting-scale system for counting small metal or iron parts and packaging them in flat bags. The counting scale system with vertical form, fill and seal machine is suitable for small metal products such as nails, screws, nuts, bolts, washers, etc. The iron and metal products are transported by a magnetic conveyor belt to the weighing and counting system and finally packed in flat pouches.- Specifications of the packaging system: max. speed of the machine in neutral: 8 cycles/minute; bag dimensions: max. L200xW300mm; power: approx. 2kW, 220V, compressed air: 0.2m³/min, 6-8bar. The system can be extended for counting and packing different products into one bag. The specifications shown refer to the sample packaging system. The final machine dimensions and the total price depend on the required packing speed, the products to be packed, the bag dimensions and other requirements. - Price for sample system only. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty. Chsdpsv Nmhzjfx Adxsd

Condition: good (used), Year of construction: 2013, operating hours: 2,000 h, functionality: fully functional, working width: 1,350 mm, working height: 940 mm, volume flow: 13.62 m³/h, operating temperature: 80 °C, Complete painting system for high production requirements and efficient series production: - Many and fast color changes - for application of water-based paints (demonstrable savings in heating energy and reduction of environmental emissions) - Conservation of resources thanks to intelligent air routing and treatment - Integrated air humidification system ensures top painting quality with low energy consumption - Short material supply routes - High system availability (double scrubber system) - Particularly powerful (high feed speeds) TECHNICAL DETAILS Coating materials: water-based Conveyor belt width: 1,350 mm Coating capacity: 0.2 - 227 cbm/min (6 - 8000 CFM) Working height: 940 mm Temperature: (hot water) 80 / 60 °C MACHINE DETAILS Estimated service life: approx. 2000 hours Machine height: 3861 mm Installation dimensions: 8,718 x 25,707 mm Operating voltage: 230/400 V, 50 Hz, (3L+N+PE) Power: 107.5 kW Compressed air: 6 bar EQUIPMENT - Dry filter Chjdpfx Aevdayyjdxsd - 4 guns on 2 lifting arms - 5 Kremlin pumps For solvent and water-based paints (two belt cleaning systems and pumps, one for solvent and one for water-based paints) Additional IR heaters installed by Venjakob and controlled by the main system to preheat the material and two additional IR heaters within the drying line. Three UV lamps, currently two mercury and one gallium lamp for highly efficient UV curing and also for gel coating.

Year of construction: 2023, condition: new, Bank branch stores event container office container exhibition stand Bank branch store container system Our modules consist as follows: exhibition container event container with glass front very noble - sales stores bank branches - Insulated pavilion / office container made of sandwich elements - Dimensions outside length 6,00 m x width 3,05 m, outside height of 2,84 m. - Inside clear height 2,54 m - Walls EPS insulated, thickness 60 mm . - Floor - Insulated, thickness 100 mm and OSB board and PVC flooring. Cedpfxsi Hpa Ds Adxjhd - Roof insulation, thickness 100 mm - Delivery as a kit Color RAL 7016 or color of your choice with surcharge All prices Euro net plus VAT. Delivery in Germany and Europe. Immediately available Single container or as container system Different sizes Adaptable and expandable at any time Optional thermal insulation and fire protection We will be pleased to submit you an offer. Please contact us AZ54900

Condition: ready for operation (used), Condition Used Stock Number 413107 This listing is for a Malvern Instruments Multisizer APA2000 Particle Counter  Chsdpfx Aewb Nv Rjdxsd

Condition: good (used), 3-section refrigerated counter with sink This Tecnodom refrigerated counter has a temperature range of 2 to 10 °C. The temperature is easy to read on the display. The refrigerated compartment is ideal for storing 1/1 GN containers. Convection cooling Automatic defrosting, tropicalized design 5 x drawers for 1/1 GN containers 1 x sink 235 x 330 x 180 mm 1 x door with 2 1/1 GN grids Raised edge: 100 mm Designed for external condensing unit Specifications: Dimensions WxDxH 1870x700x 870 mm Net weight: 104 kg Net capacity: 460 l Operating temperature 2 / +10 C Gas type: R507 Power: 495 W Codsw N Nhnepfx Adxehd Power supply: 230-1-50/60 VP-Hz You can find more items – new and used – in our shop! International shipping costs on request!

Condition: used, functionality: fully functional, Painting line/spray hook conveyor with 19 hooks, continuous loop, consisting of 2 rails of 5000 mm each, 2 rails of 800 mm each, with 4 bends. Available at the beginning of August. Chjdpfx Ajw Eb Rhodxed

Year of construction: 2025, condition: new, This machine is suitable for counting of candies, biscuits, nuts, vegetables, plant bulbs, and most solid granules. The counter is equipped with dust resistance photoelectric detection technology, multi detection and alarm control functions. The 8 tunnels belt feeding device ensures an evenly feeding and no breakage of products. The structure and design of the filling hopper prevents that the products getting jammed. Control via touch screen interface, menu in English available. - Specifications: number of feeding tracks: 8; capacity: according to customers samples, containers and filling quantity; working range: adjustable from 2-9999 per container; product sizes: min. Ø 10mm, max. Ø 60mm; large infeed hopper; compressed air: 6bar; power: 220V, 0.6-1.7kW; machine dimensions LxWxH: customized; weight: approx. 550kg. That machine/system is available in different versions for different packaging sizes and with different packaging speeds. Chjdpfx Ajv Nk Ixjdxod Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.

Condition: new, Year of construction: 2025, total height: 4,000 mm, total length: 7,000 mm, total width: 3,000 mm, warranty duration: 24 months, temperature: 80 °C, air demand: 36,000 m³/h, input voltage: 380 V, heating capacity: 345 kW (469.07 HP), power: 40 kW (54.38 HP), fuel: liquid petroleum gas (LPG), energy consumption: 40 kWh, insulation material: Mineralwolle, insulation thickness: 50 mm, nominal power: 345 kW (469.07 HP), Equipment: lighting, Pony 7000 Sales Price List Paint booth 7 x 4 x 3 meters • Reinforced partial grating 5 mm • Height 3 meters (Sprinter height) • 2 x 7.5 kW motors (belt drive) • ATEX ceiling lighting • 24,000 m³/h • Incl. 2 drive-on ramps for above-floor version • Above-floor and in-ground version at same base price Base price: €28,900 Base price for 2.76 meter height version minus €1,000 (passenger car height) Base price for 3.5 meter height version plus €1,000 (motorhome height) Cedewzmcbopfx Adxohd Door-in-door system: €1,800 Double glazed doors: €1,800 11 kW motor incl. larger fans and enhanced control cabinet with direct drive: €7,770 15 kW motor incl. larger fans and enhanced control cabinet with direct drive: €8,610 Side lighting: €2,870 Ceiling lighting EX protection according to ATEX: €1,470 Full light-duty grating: €1,785 Full heavy-duty grating, reinforced 5 mm: €2,990 Direct drive with PLC control for 11 kW motors (incl. soft start): €15,120 Direct drive with PLC control for 15 kW motors (incl. soft start): €17,640 Soft start for 7.5 kW motor (belt drive only): €1,239 PLC control for 7.5 kW 24k m³/h motors with 3-stage energy saving program: €5,670 PLC control for 11 kW 30k m³/h motors with 3-stage energy saving program: €7,770 PLC control for 15 kW 30k m³/h motors with 3-stage energy saving program: €8,610 PLC control for 2 x 5.5 kW 36k m³/h (belt drive) motors with 3-stage energy saving program: €5,565 Pneumatic drive-on ramp: €4,900 Grating modification for lift: €1,785 Pass-through system with double gates (without door-in-door): €3,250 Tri Axis ramp: €7,980 Second service door (position freely selectable): €1,150 Info: 11 kW motor set at 1,200 rpm (inverter) (1,000 rpm motor) achieves 36,000 m³/h

Condition: good (used), Sorma single lane counting machine. Approx. 3.6 m long. Infeed height 500 mm x 1.3 m overall length x 800 mm wide Codpfst Swq Iox Adxohd

Year of construction: 2021, condition: excellent (used), functionality: fully functional, We offer an automatic colony counter in perfect condition. Year of production: 2021 Brand: Interscience Model: SCAN500 Personal collection from Gdansk - the goods are located in Gdansk, Poland Chsdpjukd E Aefx Adxjd

Condition: used, inner dimension height: 1,950 mm, inner dimension width: 1,850 mm, No. 3230 Complete paint shop Wagner Rafi / Wildcat / Finish 104 B Ex Used Complete spray room equipment Spray wall Rafi mobile 1850 x 1950 mm width x height 2 drying trolleys 1 spray gun Wagner Wildcat / IceBreaker motor / pump type 18 - 40 1 Wagner Finish 104 B Ex sprayer Sale by customer order, ex location near 69124 Heidelberg, without dismantling, without transport and assembly Dismantling, loading and transportation by us optionally possible Errors in description and price reserved Csdpfxewn Tvuo Adxjhd To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical information, description of condition, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “purchased as seen” Pictures and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices excl. VAT, payment before collection or shipping Terms of delivery: ex location

Condition: good (used), Manufacturer: MAZAK Type: Integrex 200-4 S Control: MAZATROL MATRIX Year of Manufacture: 2010 Specifications Metric US Standard Max. turning diameter 660 mm X-axis 580 mm Y-axis 160 mm Z-axis 1045 mm B-axis 225° Spindle bore 82 mm Spindle speed 5000 rpm Spindle power 18.5 kW Counter spindle speed 6000 rpm Counter spindle bore 82 mm Counter spindle power 18.5 kW Tool changer 80 Driven tool speed 12,000 rpm Dimensions (estimated) Length Chjdpfxjwpufgj Adxjd 4500 mm Width 2400 mm Height 2900 mm Weight 9200 kg Please note: The information on this page was obtained to the best of our knowledge and, as far as possible, from the manufacturer. The information is provided in good faith, but accuracy cannot be guaranteed. Accordingly, they do not constitute representations or contractual terms. We recommend you check all important details.

Condition: new, Year of construction: 2025, The high-speed tablet and capsule counting and filling machine combines 16-channel counting channels. Compact design with dual-track conveyor does enhance the capacity of output. The counter is equipped with advanced detecting system which can count and fill all standard and irregular shapes and all sizes of tablet, capsules, caplets, soft gels. Suitable for all standard and irregular shapes of tablets, capsules, etc. Stable operation and low noise. Bottles are moved smoothly with dual track conveyor to the high speed filling station with dual-nozzle (number of nozzles customizable for surcharge). Easy to operate touchscreen. - Specifications: product sizes: min. Ø 3mm, max. Ø 15mm; number of vibrating tracks: 16; vibrating levels: 2; capacity for tablet example Ø 8mm: max. 3000 pcs/min; counting range: 1-9999 pcs; suitable bottles: 10-500ml, round or square; power: 220V,1.2kW; machine dimensions: L1360xW1650xH1650mm; weight: 420kg. Csdpev Nk Hzefx Adxjhd Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.

Condition: new, Year of construction: 2025, functionality: fully functional, total height: 3,500 mm, total length: 7,050 mm, total width: 4,100 mm, volume flow: 36,000 m³/h, temperature: 80 °C, input voltage: 380 V, heating capacity: 250 kW (339.91 HP), Equipment: cabin, lighting, Paint and Drying Booth It is the centerpiece of your entire painting operation: the combined paint and drying booth. (Alternatively available as a separate paint booth with a dedicated dryer.) Our solutions feature full-surface ceiling filters and, optionally, full-surface floor extraction with drive-over grating or wall extraction at the position of your choice. Chedexa H Ewopfx Adxjd If you wish to further increase the efficiency of the system beyond heat recovery and infinitely variable control via frequency converter, we can also offer you a sectional control system. This enables you, for example when doing spot repairs or partial booth loading (such as painting only add-on parts), to activate only the section where the parts are located. This allows you to operate with a reduced air volume, save energy, and minimize costs, all without compromising quality. Feel free to contact us – we would be happy to demonstrate these options in detail. Do you have any questions or suggestions? We are happy to assist you.

Condition: good (used), Sorma 2-lane CL2-104 counter. Can feed any type of packing machine. Also can count up to 800 pieces a miniute. Overall length approx. 3.2 m x 1.1 m wide. Outfeed height 1.9 m. Overall height 2.3 m Cjdjtq Iwwopfx Adxjhd

Condition: good (used), Year of construction: 2022, operating hours: 1,620 h, functionality: fully functional, machine/vehicle number: A20221005, We are selling a complete Venjakob painting system, which we used for applying clear coat to sheet metal. The sheets had dimensions of 1,500 mm in width and 6,000 mm in length. The weight per piece was up to 300 kg. The system features six independently programmable spray guns. A drying tunnel is connected. The conveyor belt in the booth is equipped with a cleaning unit. Chsdpew E E Ausfx Adxjd

Condition: excellent (used), Year of construction: 2015, 945 USED Electric shop ovens for 40/60 sheets. Production year: 2015. The set consists of 2 ovens-model MG 159 T. The price is for 2 modules (possible purchase in a single version). Chedpfeu Aaf Dex Adxod The device is available to verify in our warehouse (36-068 Bachórz, Poland). Paid options available: transport / assembly / commissioning of the device. The price is a net price. Our languages: ENGLISH, FRENCH, GERMAN, RUSSIAN, UKRAINIAN.

Condition: new, Year of construction: 2025, This machine is suitable for counting of candies, biscuits, nuts, vegetables, plant bulbs, and most solid granules. The counter is equipped with dust resistance photoelectric detection technology, multi detection and alarm control functions. The 2 tunnels belt feeding device ensures an evenly feeding and no breakage of products. The structure and design of the filling hopper prevents that the products getting jammed. Control via touch screen interface, menu in English available. -Specifications: number of feeding tracks: 2; capacity: according to customers samples, containers and filling quantity; working range: adjustable from 2-9999 per container; product sizes: min. Ø 10mm, max. Ø 60mm; large infeed hopper; compressed air: 6bar; power: 220V, 0.6-1.7kW; machine dimensions: LxWxH customized. The image shows the 8-line version. Chodpfjv Nk I Sjx Adxsd Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.

Condition: new, Powder Coating Systems For years, powder coating has been continuously evolving as an alternative to wet painting, and it has recently gained increasing importance due to its lower environmental impact—specifically the absence of solvents and paint sludge. Powder recovery further boosts the efficiency of these systems to a particularly high level. For users, powder coating offers the advantage of creating an extremely durable and corrosion-resistant surface that is significantly more impact-resistant than what traditional painting can achieve. Additionally, post-processing tasks such as grinding or drilling the powder-coated parts present no problems, as the coating will not chip off. Pony Luxury Coating powder coating systems provide you with tangible advantages: they are efficient, environmentally friendly, and—as always—unsurpassed in flexibility. We achieve this through a range of system types. Manual Powder Coating Systems Manual coating systems are the ideal solution for complex and demanding workpieces. Thanks to skilled operators, these systems offer continuous adaptation to changing conditions and varying product sizes. Flexibility is paramount—with the added benefit of an attractive entry price into the world of powder coating. Large-Scale Powder Spray Booths No matter how large or challenging your workpieces, our systems are larger! In the commercial vehicle and utility sector, where components are exposed to significant stress, powder coating has established itself as the ideal solution. To accommodate ever-larger components, we offer our large-scale powder booth, which supports unlimited manual coating, and, when combined with a conveyor system, handles any workpiece size with ease. Chsdoxa Hzxepfx Adxed Automatic Powder Coating Systems If your operation requires high throughput and rapid processing, an automated powder system is the way forward. Coupled with a conveyor, light barriers allow precise detection and, consequently, exact powder dosage to ensure maximum efficiency. The system can also be equipped with lifting stations and robots to handle even the most complex components. Powder Curing Ovens & Flash-Off Dryers These provide the perfect finishing touch to powder coating: the curing oven. Our ovens feature the highest insulation class, ensuring consistent, high efficiency. Detailed temperature control also enables use as a flash-off dryer to dry substrates after pre-treatment. Temperatures up to 250 degrees Celsius are possible, which allows usage as a tempering oven, for instance with hot-dip galvanized materials. Of course, typical use as a powder curing oven is straightforward. Optimal air distribution and a visualized control panel prevent over-baking, and even allow multiple color shades to be cured in a single process. Do you have questions or suggestions? We are happy to assist you!

Year of construction: 2010, condition: good (used), Sorma CR1-104 single lane counting conveyor. Mobile. Dimensions approx. 500 mm infeed, 1.1 m outfeed. Overall length 1.8 m long.--shorter one Chedetq Iw Eopfx Adxjd Longer one is 3,6m long and costs +1400 eur

Condition: excellent (used), Year of construction: 2014, 944 USED Electric shop ovens for 40/60 sheets. Csdpfx Aeuy Nn Nsdxohd Production year: 2014. The set consists of 2 ovens-model MG 159 T. The price is for 2 modules (possible purchase in a single version). The device is available to verify in our warehouse (36-068 Bachórz, Poland). Paid options available: transport / assembly / commissioning of the device. The price is a net price. Our languages: ENGLISH, FRENCH, GERMAN, RUSSIAN, UKRAINIAN.

Condition: new, Year of construction: 2025, Counting unit for products with a minimum diameter of 5mm. - Specifications: counting from 1 to 9.999 pcs; with a speed of: 1.200 pcs/min; stainless steel version; machine dimensions: L770xW660xH700mm; weight: 70kg; 220V, 0.2kW. Cjdpfx Aov Nk H Iedxehd Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.

Condition: new, Equipment: cabin, Stationary small parts spray booth Dixi █████ Achieve perfect and uniform coating of small parts. The extraction system ensures optimal results even in the smallest spaces. Optionally equipped with a turntable or a wheel holder, as well as a compact yet powerful extraction unit, it is perfectly suited for processing small workpieces and wheels. The side panels effectively limit the distribution of overspray, allowing work to be carried out in confined spaces without contaminating surrounding areas. Integrated lighting is also available as an option. Additionally, thanks to its low weight and minimal connections, the booth can be relocated to a new site in no time, ensuring your flexibility at all times. The system comes fully pre-assembled and ready for immediate use. Chodpfsxa Hx Rox Adxjd Your Benefits Thanks to its compact design, flexible dimensions, and versatile accessories, this booth offers a broad range of applications. The sophisticated modular system requires minimal space and is therefore suitable for use in virtually any premises. Different filter media and stages enable highly efficient operation, while filter changes can be performed in just a few minutes. Application and Safety Processing of both water-based and solvent-based coating materials is enabled by the use of ATEX-certified explosion-proof motors. It can also optionally be used for spraying adhesives. The large filter surface ensures uniform extraction throughout the process.

Condition: new, Year of construction: 2025, The high-speed tablet and capsule counting and filling machine combines 16-channel counting channels. Compact design with dual-track conveyor does enhance the capacity of output. The counter is equipped with advanced detecting system which can count and fill all standard and irregular shapes and all sizes of tablet, capsules, caplets, soft gels with 99,9% accuracy. Suitable for all standard and irregular shapes of tablets, capsules, etc. Stable operation and low noise. Bottles are moved smoothly with dual track conveyor to the high speed filling station with dual-nozzle. Easy to operate touchscreen, stainless steel version (SS304). - Specifications: error rate: < 0.1%; number of vibrating tracks: 16; capacity: max. 5200 pcs/min; counting range: 15-9999 pcs; product sizes: min. Ø 3mm, max. Ø 22mm; container: Ø(25-75)xH(0-240)mm; infeed hopper volume: 38l; compressed air: 0.15m³/6bar; power: 220V/3.8kW; machine dimensions: L1800xW1550xH1750mm. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty. Cedpfx Asv Nk Ifjdxjhd

Condition: used, Year of construction: 2024, Please find attached information about our powder coating and wet painting line, which we established last year in the Izmir Free Trade Zone. The facility is designed for bicycle painting. The dimensions are 680 × 680 × 2100 mm (L × W × H). Plant components: 1. 5-stage pretreatment washer, 2-stage plate heat exchanger, and heated stainless steel sheet 316 1.1. Water drying tunnel with reversing function, 135 m 1.2. Control panel 1.3. Medium-duty overhead conveyor 2.1. Label curing oven and conveyor belt, 75 m 2.2. Labeling area with air-conditioned roof and conveyor belt 3.1. Powder coating system, 135 m 3.2. Powder curing oven with 2 reversing functions 3.3. Powder spray booths not included; two Wagner powder spray booths 3.4. Medium-duty overhead conveyor 4.1. Wet painting system 4.2. Powder coating oven 4.3. Wet spray oven 4.4. Exhaust ventilation 4.5. Four wet paint spray booths 4.6. Two air-conditioned mixing rooms 4.7. 290 m conveyor belt 5.1. Label application system, 90 m 5.2. Air-conditioned area in the roof Codpoxa Expofx Adxshd The facility cost €2,800,000.00 as new. This is a fully automatic powder and wet paint line. Individual components can also be purchased. If you are interested, please do not hesitate to contact us.