Used Sheet Rolling Machine for sale (69,235)

Condition: new, plate thickness 4 mm roll diameter 125 mm throat 200 mm total power requirement 2,2 kW Nksdpfx Aeynnkfegwjw weight of the machine ca. 0,48 t dimensions of the machine ca. 1,6 x 0,6 x 1,2 mm Exhibition machine, unused. • 5 speeds • Foot control • Brake motor • Emergency stop • Hydraulic roller adjustment • Special tool set

Condition: new, plate thickness 0,8 mm throat 180 mm weight of the machine ca. 22 Kg dimensions of the machine ca. 500 x 450 x 160 mm Flanging machine is equipped with: - Emergency switch Nedpfx Agsht R Hmswjkw - Footswitch - 7 pcs. Roll sets

Condition: used, Thread rolling machine, cold rolling machine, thread rolling machine, profile rolling machine Manufacturer PEE-WEE Type P 24 Q serial no. LC2403099 year of construction 2004 Rolling force max. 24 ton. Tool diameter max. 200 mm Rolling spindle diameter 69,85 mm Tool bore diameter 70 mm (nominal diameter) Tool length, tool length max. 180 mm Workpiece diameter max. 50 mm Rolling spindle speed 22 - 44 - 95 - 190 rpm Motor power hydraulics approx. 3 kW Motor power roller drive 5.5 kW Mains connection 400 Volt, 50 Hz - Swivel roller spindle for threaded continuous rollers - Rolling spindle speed in 4 stages via gear changeover - Hydraulic system integrated in the machine bed Space requirement L x W x H 2000 x 1750 x 2550 mm Weight approx. 3 tons good condition Nkjdpjh A S Htefx Agwew Grooving rollers: The thread rolling tools with the same pitch as the workpiece form the thread by penetrating into the workpiece up to the nominal diameter. The thread length is maximum as long as the rolling tools are wide. Continuous rolling: When the thread length is greater than the rolling tool width. Through-feed tools have 3 sections - the infeed, the calibration section and the outfeed. Grooved rollers have no pitch and are swiveled with the pitch angle of the profile to be rolled. Pitch rollers differ from grooved rollers in that they have a pitch in the profile. The sum of the pitch angle and the swivel angle gives the pitch angle in the workpiece.

Condition: used, Pneumatic folding and edging machine FASTI Type 606 - 11 - 1.0 Folding machine for pre-forming sheet metal seams For producing a seam bend Seam bending machine for thin sheet metal as an alternative to a press brake Serial no.: 9166002 Year of manufacture: 1991 Working length: 1100 mm Material thickness at 45 kg/mm²: 1 mm Compressed air requirement: 6 bar - pneumatic foot switch - roller adjustment via threaded clamping screws Required space (L x W x H): 1600 x 300 x 1050 mm Weight: approx. 250 kg Nksdpjdzqblsfx Agwjw Good condition The seam is the doubling over of the sheet metal edge (1x folded over) to increase the stiffness of the sheet. By folding over, a rounded edge is created, reducing the risk of injury from sharp sheet edges. Ideal for metalworking applications such as sheet metal furniture, cladding panels, or for the production of ventilation and silencer components.

Condition: used, Hand - swing bending machine KRAMER type AMS 650 x 1,5 Hand swivel bending machine, press brake year of construction approx. 1985 working length 650 mm sheet thickness at 40 kg/mm2 1,5 mm Nkodpfx Aedzqaaegwew upper beam opening approx. 60 mm bending beam adjustment ca- 0-25 mm bending angle 0-180 - Upper beam adjustment via hand crank - pre-screw rail for the bending beam - one-piece sharpening rail 135° space requirement L x W x H 1200 x 600 x 1100 mm weight 160 kg good condition

Condition: ready for operation (used), Year of construction: 2015, Used Timesavers Deburring Machine 42-Series-1350-WRB Technical Specifications: Year of manufacture: 2015 Condition: refurbished (2026) The machine is under power and can be inspected by appointment! Max. working width: 1350 mm Abrasive belt dimensions (W x L): 1380 x 1900 mm Nkedpoyk U Szjfx Agwow Antistatic device Maximum weight: 100 kg Electrical connections: 400 V Frequency: 50 Hz 1st Unit: Contact roller Ø 180 mm Contact roller 55° Shore NI, grooved Pneumatic oscillation Fine adjustment by raising/lowering the contact roller Dial gauge Main motor 15 kW Processing speed: 11 m/s, in feed direction 2nd Unit: Rotary brush unit 8 brushes Ø 350 mm Motorized height adjustment with tip switch Drive motors: 5x 1.5 kW Rotational speed of the unit, frequency controlled Processing speed: 6 – 17 m/s 3rd Unit: Wall-mounted parts cleaning brush Feed: Fixed vacuum table Feed belt, flat and perforated, oil- and heat-resistant, flame-retardant Feed motor 2.6 kW, frequency controlled, 0.6 – 8 m/min Tip switch for forward/reverse feed belt Motorized height adjustment of table 0.18 kW, 0 – 100 mm, digital display Pressure rollers: Spring-loaded pressure rollers Ø 50 mm, with limit switch at the front Vacuum pump 15 kW Machine built to CE standards Main switch, operating hours counter Sound pressure level: ± 80 dB Machine weight: 6,200 kg Extraction and/or installation service can be offered on request!

Condition: excellent (used), functionality: fully functional, input voltage: 400 V, warranty duration: 3 months, working width: 250 mm, total width: 2,300 mm, total length: 750 mm, total height: 1,370 mm, DGUV certified until: 03/2027, type of input current: three-phase, conveyor belt width: 250 mm, year of last overhaul: 2026, Lippelt Mini Rustica Bun Production Line for all specialty buns Stainless steel construction Simple and efficient production of square dough pieces Stepless cutting length adjustment Cutting rollers newly coated Machine is mobile Robust technology DGUV V3 tested – only by us Connection: 400V, 16A-CEE plug Dimensions: L 2300 x W 750 x H 1370 mm Nkedpjx I U H Usfx Agwew Used machine, cleaned and SAB tested with warranty & spare parts service Options: Rumo seed dispenser Maintenance contract Service package Spare parts box Delivery service Commissioning & instruction We have more bakery machines in stock!

Condition: new, functionality: fully functional, Year of construction: 2025, coil width: 200 mm, product width (max.): 200 mm, overall weight: 80 kg, warranty duration: 12 months, working width: 200 mm, product height (max.): 3 mm, roll width: 64 mm, Silicon+ SFS 200 Servo Roll Feeder Nkedpfx Agevptz Iowow Compatible with all kind of presses, primarily used on Bruderer, Schaal and Mabu machines. Feeding length – min 0.10 mm to max. 9999.99 mm Feeding width – max. 100 mm, 200 mm or 300 mm. Depending of model required. Material thickness – 0.20 – 3.20 mm Feeding angle – 180° Die line height – ± 50 mm Max. feeding speed – 20 m/minute Strip release – Festo pneumatics Control – NC Touch screen Servo brushless motor – 0.75 KW, 1.8 KW or 2.3 KW. Weight approx. feeder: 80-150 kg. Feeder dimensions: 780 X 730 X 680 mm – The unit is driven by the brushless servo motor, with direct drive transmission, eliminate the gear clearance, abrasion, no noise, no lubrication, safely to a synchronized pair of roller segments. – Rolls can be made upon request with PU surface for delicate raw material feeding. – Synchronization of the feeder and punching machine is done easy through cam signal from PLC of a punching machine. – Programmable feeding can be done for up to 10 groups of feeding pitches and saved as recipes. The feed length can be steplessly adjusted during operation EUR 1 certificate of European origin and CE compliance. This information is subject to change without notice, we can make personalized feeders for your needs with prior agreement.

Condition: excellent (used), Year of construction: 2014, Roller coater BÜRKLE easy coater RCL 12M and UV system easy cure UV - TRUV with 2 lamps and 2 x roller conveyor BÜRKLE easy coater RCL 1300: For one-sided application on flat surfaces from above Operating side left Touch screen control TP 177 Micro Rubberized application roller Hard chrome-plated metering roller can be sensitively adjusted via worm gearbox Controlled belt transport with exposed counter roller for safe workpiece transport Quick-change system with split bearing and cross-disc coupling for easy changing of the application roller Oscillating squeegee, can be changed quickly for cleaning Separate, infinitely variable FU direct drives for application roller, metering roller and transport Reversible dosing roller Motors and limit switches in Ex version on the machine Non-Ex control cabinet and control panel outside the danger zone on the machine Mobile version Electrical preparation for integrating the roller coating machine into a coating line Technical data Working width: 1300 mm Workpiece height 3 - 80 mm Nkedpfxjt Dx U Sj Agwjw Min. workpiece length 400 mm Rubberized application roller DM 240 mm Chrome-plated metering roller DM 172 mm Transport speed 2 - 15 m/min variable Connected load approx. 2.4 kW Speed of metering roller 1.0 - 3.0 m/min Working height 900 mm (+/- 20) Safety equipment according to CE Incl. switch cabinet Weight approx. 1650 kg UV system e.a.s.y. cure UV - TRUV with 2 lamps One-sided curing of UV-curing lacquers on flat workpieces from above Incl. control cabinet Working width max 1300 mm Workpiece height max 80 mm Number of lamps 2 # - changed 10/2023 UV lamp power 120 W/cm² each Speed 2 - 15 m/min variable Transport: Transport carpet Exhaust air connection 2 x 250 mm Connected load 39 kW Weight approx. 750 kg 2 x roller conveyor RB 1300 Working width 1300 mm length 4000 mm Speed 2 - 15 m/min variable Connected load 2 x 0.37 kW Total system length 12450 mm

Condition: new, Year of construction: 2024, neu 2024 9740 prompt, Zwischenverkauf v Türkei 6200 € 119.66 € 1 1050 mm 3 mm 90 mm 6 m/min 1.1 kW 1630 mm 700 mm 1200 mm 480 kg 3 rolls asymmetric rolls - prebending 2 rolls driven by brakemotor lateral roll adjustable by handwheel longitudinal grooves in lower and lateral roll tiltable upper roll Nsdpfxowiqnws Agwjkw right / left rotation with double foot switch conical rolling device user manual in GERMAN

Condition: used, functionality: fully functional, Year of construction: 2008, control type: manual, degree of automation: manual, actuation type: hydraulic, number of rollers: 3, roller (top) diameter: 1,100 mm, side roll diameter: 980 mm, roller diameter: 1,430 mm, roller length: 3,100 mm, working width: 3,000 mm, working height: 4,160 mm, sheet thickness (max.): 200 mm, sheet thickness steel (max.): 200 mm, overall weight: 225,000 kg, total length: 9,000 mm, total width: 5,580 mm, total height: 6,100 mm, power: 220 kW (299.12 HP), input voltage: 380 V, input frequency: 50 Hz, number of digital displays: 2, Equipment: cone bending device, documentation/manual, emergency stop, hardened rollers, Hydraulic Plate Bending machine planetary pinch pyramid with prebend. model MG3200 3 roll capacity 3100x200 mm year of make 2008 Nedsyvgauopfx Agwekw Capacity : Plate width mm. 3000 Rolling thickness mm. 200 Pre-bend thickness mm. 160 -3 rolls driven hydraulic motorized with axial gear unit on each roll independent -Planetary design with pre-pinch fully hydraulic Rolls surface length mm. 3100 Top roll mm. 1100 Side rolls mm. 980 Electric power on hydraulic unit Hp 220 + Hp 180 Voltage 400 Vac / 50 Hz Configuration & accessories installed with the machine -Hardened surface of the 3 rolls -Conical plate bending attachment , rolls tilt with contrast roller type. -Centralized operator panel with directional joysticks electric. -Digital position readout of the bending rolls. -Oil cooler automatic unit heat exchanger. -Emergency and safety installations, certified CE -User manuals and instruction books in English -Dimension 9000 x 5580 x H 6100 mm -Weight approx. 225 Ton.

Condition: good (used), input voltage: 400 V, DGUV certified until: 03/2027, type of input current: three-phase, overall weight: 2,500 kg, König dough band line Njdpfx Agsx Ncddowekw Hopper with oiling with punching station and depositing Interchangeable cutting rollers Maximum dough throughput: 600 kg/h Capacity up to 7,500 pieces/hour Stainless steel construction Dimensions approx. 6215 x 1000/1800 x 2555 mm (W x D x H) Connection: 400V, 32A CEE plug Used machine We have more bakery machines in stock!

Condition: new, Ostas 3-rolls round bending machine ORM 1070 x 130 Special equipment included in the price Nksdpfxjiu Hpfj Agwsw hardened rolls motorized rear roller adjustment digital display sheet width 1070 mm sheet thickness 5,5 mm max. sheet thickness 5,0 mm bending roll length 1070 mm roll diameter 130 mm weight 1150 kg dimension L-W-H 2250 x 800 x 1100 mm Motor: 2.2 KW Equipment: upper and lower roller electr. driven upper roller can be swung out conical bending device asymmetric roller arrangement self-braking main motor sep. control and operation panel safety line CE mark values apply to St-37 / 240 N/mm²

Condition: new, Ostas 3 rolls round bending machine SMR-S 1570 x 170 Technical specifications: Special equipment included in the price: motorized lower roll adjustment hardened rolls motorized back roll adjustment 2 x digital display sheet width 1570 mm sheet thickness 8,0 mm max. sheet thickness 7,0 mm bending roll length 1570 mm smallest diameter 255 mm roll diameter 170 mm weight 1960 kg dimension L-W-H 3200 x 920 x 1260 mm motor 5,5 KW Equipment: upper and lower roll electr. driven upper roller can be swung out conical bending device asymmetric roller arrangement Nkodpfoiw D Smsx Agwow self-braking main motor sep. control and operation panel safety line, CE-sign values apply to St-37 / 240 N/mm²

Condition: new, Rollmak 3-roll round bending machine SME 140-20/4,5 Special equipment included in the price hardened rolls motorized back roll adjustment digital display sheet width 2050 mm sheet thickness 4,5 mm max. sheet thickness 4,0 mm bending roll length 2050 mm roll diameter 140 mm smallest bending diameter 210 mm weight 1550 kg dimension L-W-H 3150 x 900 x 1200 mm Motor:2,2 KW Equipment: upper and lower roller electr. driven upper roller can be swung out conical bending device asymmetric roller arrangement self-braking main motor sep. control and operation panel safety line Nodpfx Aolu Eumegwokw values apply to St-37 / 240 N/mm² CE mark

Condition: new, Ostas 3-roll round bending machine SBM 1070 x 95 Features: Asymmetric 3-roll round bending machine with motor drive Special equipment included in the price: Hardened rolls Motorized rear roller adjustment Digital display Top roller can be swung out Nedpfx Agjgkwimowokw Conical bending device Foot switch Technical details: sheet width: 1070 mm sheet thickness: 3,0 mm roll length: 1070 mm Roll diameter: 95,0 mm Smallest bending diameter: 140,0 mm Motor power: 1,1 kW Dimension L-B-H: 1350 x 760 x 1250 mm Weight: 370 kg

Condition: new, Ostas 4-Roller Plate Bending Machine 4R OHS 1570 x 150 Hydraulic side roller adjustment 3 digital displays Hydraulic drop-end Hardened rollers Device for conical bending Separate control panel Roll length: 1570 mm Top roller diameter: 150 mm Side roller diameter: 130 mm Total motor power: 4+3 kW Weight: 2,470 kg Dimensions (mm): 3350 x 1200 x 1210 (L x W x H) Bending performance data Nedpfxoxrc Dto Agwekw 6 mm at minimum internal diameter (5 x top roller) 4 mm at minimum internal diameter (1.5 x top roller) Pre-bending performance data 4 mm at minimum internal diameter (5 x top roller) 3 mm at minimum internal diameter (1.5 x top roller) All bending capacities are calculated on the basis of 250 N/mm² yield strength Material (ST 37 - ST 42 structural steel)

Condition: new, Ostas 4-Roll Plate Bending Machine 4R OHS 2570 x 275 Hydraulic Side Roll Positioning 3 Digital Displays Hydraulic Drop-End Hardened Rolls Cone Bending Device Nsdpfx Agsxrdn Hewokw Separate Control Console Roll Length: 2570 mm Top Roll Diameter: 275 mm Side Rolls Diameter: 220 mm Total Motor Power: 16.5 kW Weight: 9500 kg Dimensions (mm): 5350 x 1750 x 1950 (L x W x H) Bending Performance Data 16 mm at minimum inside diameter (5 x top roll) 12 mm at minimum inside diameter (1.5 x top roll) Pre-bending Performance Data 12 mm at minimum inside diameter (5 x top roll) 10 mm at minimum inside diameter (1.5 x top roll) All bending capacities are based on 250 N/mm2 yield strength Material (ST 37 – ST 42 structural steel) The images shown are for illustration purposes only.

Condition: new, Rollmak 3-roll round bending machine SM 90-12/3,0 Special equipment included in the price hardened rolls motorized back roll adjustment digital display sheet width 1250 mm sheet thickness 3,0 mm max. sheet thickness 2,5 mm bending Nsdpfx Aslu Enrjgwekw roll length 1250 mm roll diameter 90 mm smallest bending diameter 130 mm weight 500 kg dimension L-W-H 1850 x 700 x 1200 mm motor:1,1 KW Equipment: upper and lower roller electr. driven upper roller can be swung out conical bending device asymmetric roller arrangement self-braking main motor sep. control and operation panel safety line values apply to St-37 / 240 N/mm² CE mark

Condition: new, Rollmak 3-rolls round bending machine ST3 130-15/6 Special equipment included in the price hardened rolls motorized rear roll adjustment digital display sheet width 1550 mm sheet thickness 6,0 mm max. sheet thickness 5,0 mm bending roll length 1550 mm roll diameter 130 mm smallest bending diameter 195 mm weight 1650 kg dimension L-W-H 3250 x 850 x 1300 mm Motor:3,0 KW Equipment: upper and lower roller electr. driven upper roller can be swung out conical bending device asymmetric roller arrangement self-braking main motor sep. control and operation panel Nodjlu Evnopfx Agwjkw safety line values apply to St-37 / 240 N/mm² CE mark

Condition: new, Ostas 3-roll round bending machine SMR-S 2070 x 190 Technical specifications: Special equipment included in the price: motorized lower roll adjustment hardened rolls motorized back roll adjustment digital display sheet width 2070 mm sheet thickness 7,0 mm max. sheet thickness 6,0 mm bending roll length 2070 mm Nkodpfx Ajg Nz T Iogwow smallest diameter 285 mm roll diameter 190 mm weight 3480 kg dimension L-W-H 3750 x 920 x 1260 mm motor 4 KW equipment: upper and lower roller electrically driven upper roller can be swung out conical bending device asymmetric roller arrangement self-braking main motor sep. control and operating panel safety line, CE-sign

Condition: new, Fastech 3-roll round bending machine FRS 1250 x 140 Technical specifications: Special equipment included in the price: hardened rolls motorized back roll adjustment motorized bottom roll adjustment 2 x digital display sheet width 1250 mm sheet thickness 5,5 mm max. sheet thickness 5,0 mm bending roll length 1250 mm roll diameter 140 mm smallest bending diameter 210mm weight 1365 kg dimension L-W-H 2020 x 900 x 1200 mm Motor:2,2 KW Equipment: upper and lower roller electr. driven upper roller can be swung out conical bending device asymmetric roller arrangement self-braking main motor sep. control and operation panel Nkjdpfxehzq Dxo Agwjw safety line values apply to St-37 / 240 N/mm² CE mark

Condition: new, Cesurbend 3-roll round bending machine MRS 1050 x 110 Technical specifications: Special equipment included in the price: motorized lower roll adjustment hardened rolls motorized rear roller adjustment digital display sheet width 1050 mm Nkodpshrdiuofx Agwjw sheet thickness 5,0 mm max. sheet thickness 4,0 mm bending roll length 1050 mm roll diameter 110 mm weight 1080 kg dimension L-W-H 1820 x 850 x 1150 mm Motor: 2.2 KW Equipment: upper and lower roller electr. driven upper roller can be swung out conical bending device asymmetric roller arrangement self-braking main motor sep. control and operation panel safety line CE mark

Condition: new, Cesurbend 3-roll round bending machine MRS 1550 x 140 Technical specifications: Special equipment included in the price: motorized lower roll adjustment hardened rolls motorized rear roller adjustment Nedpfshrdmmox Agwskw digital display sheet width 1550 mm sheet thickness 5,0 mm max. sheet thickness 4,0 mm bending roll length 1550 mm roll diameter 140 mm weight 1360 kg dimension L-W-H 2320 x 850 x 1200 mm motor: 2.2 KW Equipment: upper and lower roller electr. driven upper roller can be swung out conical bending device asymmetric roller arrangement self-braking main motor sep. control and operation panel safety line values apply to St-37 / 240 N/mm² CE mark

Condition: new, Ostas 3 rolls round bending machine SMR-S 1070 x 130 Technical specifications: Special equipment included in the price: hardened rolls motorized back roll adjustment digital display Nkjdpoiw D Dmsfx Agwjw sheet width 1070 mm sheet thickness 7,0 mm max. sheet thickness 6,0 mm bending roll length 1070 mm smallest diameter 195 mm roll diameter 130 mm weight 1150 kg dimension L-W-H 2550 x 630 x 1020 mm motor 3,75 KW Equipment: upper and lower roller electr. driven upper roller can be swung out conical bending device asymmetric roller arrangement self-braking main motor sep. control and operation panel safety line, CE-sign values apply to St-37 / 240 N/mm²