Used Setup for sale (883)

Condition: used, Year of construction: 2013, lifting height: 3,550 mm, fuel type: diesel, Weights Empty weight: 7.240 kg Functional Lifting capacity: 320 kg Working height: 3.250 cm Condition General condition: average Technical condition: average Visual appearance: average Other information Rjdjv Tkk Iepfx Aa Eeck Delivery terms: EXW Max. horizontal reach: 2080 m Transport dimensions (LxWxH): 8,8x2,55x3,55 Production country: DE Additional information Please contact Christian Theißen for more information Manufacturer: Ruthmann Model: T 330 Year of build: 2013 Condition: Used Data: Max. working height: 32,50 m Max. platform height: 30,50 m Max. reach: 20,88 m Total dimensions LxWxH: 8,80 x 2,55 x 3,55 m Platform dimensions LxW: 1,71 x 0,86 m Max. basket load: 320kg Swivel range: 180° Ground pressure: 56kN Ground clearance: 0,15 m Support width vertical: 2,53 m Support width one side: 3,86 m Support width both sides: 5,30 m Support length: 4,87 m Own weight: 7.240 kg Driving license class: C1/3 Special features: Rotatable work basket yes, basket arm, rotation angle yes, WITHOUT roof protection, advantage: electricity connection in the basket, loading area with tail lifts, box body, enormous lateral reach, automatic setup and retraction, largest reach on 7.5t chassis Information: TÜV and UVV new Location: 41468 Neuss immediately available

Condition: excellent (used), Year of construction: 2016, operating hours: 23,163 h, functionality: fully functional, travel distance X-axis: 1,524 mm, travel distance Y-axis: 660 mm, travel distance Z-axis: 610 mm, rapid traverse X-axis: 3 m/min, rapid traverse Y-axis: 3 m/min, rapid traverse Z-axis: 2 m/min, torque: 118 Nm, controller manufacturer: Hurco, controller model: MAX5, total height: 3,298 mm, total length: 5,662 mm, total width: 3,921 mm, table width: 660 mm, table length: 1,676 mm, table load: 1,360 kg, rotary table diameter: 600 mm, rotational speed (max.): 100 rpm, overall weight: 10,900 kg, spindle speed (max.): 12,000 rpm, distance table center to spindle nose: 622 mm, spindle motor power: 36,500 W, spindle nose: BT40, number of spindles: 1, number of slots in tool magazine: 40, tool length: 249 mm, tool diameter: 75 mm, tool weight: 7 g, input voltage: 400 V, type of input current: three-phase, Equipment: chip conveyor, 🔹 For Sale: 2016 Hurco VMX60SRTi 5-Axis CNC Machining Centre – Excellent Condition, Full Package 🔹 Make: Hurco Model: VMX60SRTi Year: 2016 Machine Type: 5-Axis CNC Machining Centre Condition: Excellent Control System: Hurco WinMax with Touchscreen Location: Ireland 📌 Machine Overview: Available now is a Hurco VMX60SRTi 5-Axis CNC Machining Centre in excellent condition, fitted with high-performance features and Hurco’s flexible swivel-head + rotary table configuration. This 2016 model delivers outstanding part accessibility, powerful milling capability, and robust software for advanced 5-axis work. The large table space supports both full 5-axis and standard 3-axis machining, offering maximum operational flexibility for tooling, mold-making, aerospace, and general precision engineering. ✅ Key Features & Included Options: Touchscreen display with shaded 3D graphics (real-time) 2GB RAM | 120GB SSD | USB ports Ultimotion high-speed software (profiling & data smoothing) S-Curve Acceleration & Look-Ahead Finish Control Coolant Through Spindle (CTS) NC4 Laser Tool Probe Renishaw RMP60 Part Probe Software Add-ons: Mould Maker Suite (3D Swept Surface, Helical Entry, Rest Machining) DXF Import, Ultipocket, Adaptipath Ultimonitor + Ultinet (Networking/Remote Diagnostics) Conversational/NC Merge Swivel B Axis & C Axis Rotary Table Conversational or G-code Programming flexibility 🔧 Technical Specifications: Table Size: 1676 x 660 mm Rotary Table Diameter: 600 mm Rcjdpfx Aouyt U Tsa Ejk Max Load (Flat Table): 1360 kg Max Load (Rotary Table): 500 kg X Travel: 1524 mm Y Travel: 660 mm Z Travel: 610 mm B Axis Tilt: ±92° C Axis Rotation: 360° Spindle Nose to Table: 13–622 mm Spindle Speed: 12,000 rpm Spindle Taper: BT40 Spindle Power: 36.5 kW Spindle Torque: 118 Nm - 2,900 rpm Tool Changer: 40 Tools Max Tool Diameter: 75 mm Max Tool Length: 249 mm Max Tool Weight: 7 kg Rapid Traverse Rates: X/Y: 32 m/min | Z: 24 m/min Rotary Table Speed: 100 rpm Power Requirement: 70 kVA Machine Dimensions (LxW): 5662 x 3921 mm Height: 3298 mm Machine Weight: 10,900 kg 📈 Ideal For: Aerospace & Defence Components Mould & Die Work Complex 3D Surface Milling Multi-Side Machining in One Setup High-Precision Part Manufacturing Hurco VMX60SRTi for Sale 5 Axis CNC Machining Centre Used Hurco CNC Machine Hurco 5 Axis CNC Ireland CNC Machining Centre with Rotary Table

Condition: new, The KHT 3006 M NC is a high-performance hydraulic guillotine shear designed for precise sheet metal processing. This robust machine features a swing-beam design with a cutting bar guided in a pivot bearing, ensuring straight cuts without upper and lower blades jamming. It is equipped with an Estun E21 NC control system, allowing for precise positioning of the back gauge, which is vital for both single cuts and program runs. The machine's large work table includes roller balls and a sturdy adjustable angular stop for easy handling and secure plate alignment, supporting up to 6 mm thick plates. Safety is paramount, with a continuous finger guard and a rear-mounted light barrier system adhering to the latest CE regulations. Ideal for various applications, including those involving stainless steel, the KHT 3006 M NC combines quality, reliability, and user-friendly operation. You can buy now or request a quote for this innovative hydraulic guillotine shear, an essential in any sheet metal processing setup. Rcsdpfjxchz Ssx Aa Esk

Condition: excellent (used), Year of construction: 2014, operating hours: 39,000 h, functionality: fully functional, machine/vehicle number: 3325, Model S-191FTL-PRM Ø 50 mm Axis travel Milling vertical axis Z = 200 mm Milling transverse axis Y = 200 mm Milling longitudinal axis X = 410 mm Power / Thrust Z-Y 2.5 kW / 550 daN X 4.5 kW / > 550 daN X-Y-Z Traversing speed: 40 m/min Acceleration: 10 m/s² Resolution X-Y-Z: 0.0001 mm Measuring system: glass scale MAIN SPINDLE C (Horizontal turning axis) Power: 15 kW Torque / peak: 22 / 28 Nm Measuring system: direct Resolution: 0.0001° Accuracy: 0.001° Bar capacity: Ø 32 mm (option 50 mm) Turning spindle speed: 72,000°/min Clamping force, turning: 4,900 N at 6 bar B-AXIS SPINDLE INCLINATION (machining) Power: 4.3 kW Torque: 119 / 226 Nm Angular travel: -25° / +115° Measuring system: direct Resolution: 0.0001° Accuracy: 0.001° Rotational speed: 36,000°/min Locking torque: 200 Nm MACHINING SPINDLE Power: 8 kW Redpfx Aasw T Sl De Eeck Torque: S1 = 9.5 Nm / S6 = 11.5 Nm Max speed: 30,000 min-1 (option 40,000 min-1) Tool clamping force: 1,000 N Locking torque: mechanical locking with straight toothing Tool holder taper: HSK-40 (A or E) Through-spindle lubrication: 30 to 100 bar (optional) TOOL CHANGER Number of tools: 30 (option 60) Number of indexed tools: all Tool change time: 1.2 sec. Chip-to-chip time: 4.4 sec. Max tool diameter: Ø 40 mm (80 mm if adjacent station empty) Max tool length: 130 mm Max tool weight: 1.5 kg MISCELLANEOUS Installed power: 25 kVA Operating voltage: 3/N/PE/400V/230V 50 Hz Pneumatics: 6 bar (dry air) CNC CONTROL: Fanuc 31i Screen: 15'' color Keyboard: alphanumeric Control panel features: - 1 key switch for functions - 1 feedrate potentiometer 0–120% - 1 spindle speed potentiometer 50–120% - 1 quick-selection button for machine functions - 1 integrated electronic handwheel CNC Options - Data server with ATA Flash, 1GB memory capacity - J947 1 MB RAM memory - S677 TCPC (tool center point control for 5-axis machining) - S808 Al nano HPCC (Al high precision contour control II) - J930 tool tip radius compensation - J893 coordinate system rotation - J819 Helix (cylindrical) interpolation - J953 memory capacity for 1,000 programs - J828 tapping without compensation chuck - S615 insertion of radii and chamfers - J894 workpiece coordinate system - S993 part setup error - R522 inclined machining plane control with guidance Interfaces - Bumotec-specific programming to minimize collisions - Simplified tool management to prevent input errors - Tool management by threshold value, change according to part count or tool life - Automatic tool setting on machine for easier tool handling - Part counter and production management Y-AXIS (horizontal cross milling axis) Travel: 200 mm Power / thrust: 4.8 kW / 240 daN Resolution: 0.0001 mm Max travel, V1: 50 m/min Max travel, V2: 20 m/min Measuring system: glass scale Z-AXIS (horizontal longitudinal milling axis) Travel: 400 mm Resolution: 0.0001 mm Max travel, V1: 50 m/min Max travel, V2: 20 m/min Measuring system: glass scale Includes 8kW cooling unit Emergency braking system integrated Subject to errors and omissions, technical specifications are provided without obligation.

Condition: used, Combined tenon, slot and rebate angle machine Weinig UC 10, for the flexible production of various windows, elements and doors without changing tools. Frame-wise, serially or individual parts production, including tool set Oertli Wood/Alu IV 77 & 67 and Wood IV 77 & 67. · Aggregates: 1. Cross-cut saw: NC controlled, ø 40 mm, 3 kW 2. Tap and slot spindle: clamping length: 640 mm, ø 50 mm, stroke: 8 x 80 mm, 11 kW 3. Profiling spindle 1: clamping length: 320 mm, ø 50 mm, stroke: 4 x 80 mm, 11 kW 4. Profile milling unit, horizontal from above, 3 kW, ø 40 mm, clamping length: 40 mm 5. Profiling spindle 2: clamping length: 320 mm, ø 50 mm, stroke: 4 x 80 mm, 11 kW 6. Profile milling unit, vertical right, 3 kW, ø 40 mm, clamping length: 160 mm 7. Profile milling unit, horizontal from below, 3 kW, ø 40 mm, clamping length: 125 mm · Studio window setup · CNC controlled length stop · Slat conveyor including conveyor belt for automatic return transport to the operator · NC-axis: feed height adjustment · Milling package · Incl. tool set Oertli Wood/Alu IV 77 & 67 as well as Wood IV 77 & 67. Rcodevmqtcjpfx Aa Eok

Condition: ready for operation (used), Two Machines Flake Purifier+ C 512 HR Color Sorter & Flake Purifier+ N 1024 Sesotec Polymer sorter Specs on Flake Purifier+ C 512 HR Color Sorter Refurbished in 2021 Technical Data Throughput up to (kg/h) Up to 3.8 Suitable grain sizes 2 - 20 mm Power (max. KVA) 3.4 Rcjdpfx Aaoxlknms Eok Temperature range +5"C to + 40"C Weight 1300 to 1500 kg Electrical connection Power connection cable 5x4 mm2 Electric fuse 16 A Protection class IP 54 Rated current (max. A) 5 Specs on Flake Purifier+ N 1024 Sesotec Polymer sorter Technical Specifications • Working width: 1024 mm • Nozzle grid / valve spacing: 3.2 mm • Number of valves: 160 high-speed air-eject nozzles • Detection resolution: 2 mm (optical) / 16 mm (metal) • Metal detection sensitivity: Fe ≈ 0.6 mm | Al ≈ 0.1 mm • Throughput capacity: up to 3 – 3.8 t/h (depending on material and sensor setup) • Sorting technology: CCD color camera + metal detector (“CM” configuration) • Particle size range: 2 – 20 mm • Separation method: Compressed-air blast via precision valve array • Enclosure rating: IP 54 • Power requirement: ≈ 3.4 kVA | 230 V, 50 Hz • Operating temperature: +5 °C to +40 °C • Purity achievable: up to 99.999 % (depending on configuration) • Control system: Touch-screen interface with VISUTEC software (optional remote monitoring via VISUDESK) • Modular design: Expandable to include NIR sensor (“N”) or additional sorting modules

Condition: good (used), Year of construction: 2015, lifting height: 24,800 mm, fuel type: diesel, Empty weight: 3.340 kg Lifting capacity: 230 kg Working height: 2.680 cm CE mark: yes Technical condition: good Visual appearance: good Delivery terms: EXW Transport dimensions (LxWxH): 6,78x2,09x2,97 Please contact Christian Theißen for more information Manufacturer: Ruthmann Model: TB 270 Year of build: 2015 Condition: Used Data: Max. working height: 26,80 m Max. platform height: 24,80 m Max. reach: 14,80 m Total dimensions LxWxH: 6,78 x 2,09 x 2,97 m Platform dimensions LxW: 1,39 x 0,70 m Rodexc Hmtopfx Aa Esck Max. basket load: 230 kg Swivel range: +/- 225° Ground pressure: 29/19 kN Ground clearance: 0,20 m Support width vertical: 2,09 m Support width one side: 2,77 m (in front)/ 2,72 m (rear) Support width both sides: 3,51 m(in front)/ 3,31 m (rear) Support length: 3,95 m broad/ 2,97 m narrow Own weight: 3.340 kg Special features: Rotating work basket, socket in the work basket, motor on/off switch in the work basket, grounding possible, automatic setup and retraction, memory function. Location: 41468 Neuss immediately available

Condition: used, Year of construction: 1998, controller manufacturer: Siemens, controller model: 840D, _____ Description: Year of manuf. : 1998 Control : Siemens 840D Speed : 15000 rpm Movement X/Y/Z : 800/600/500 mm Tool holder : SK40 Mainspindle: Speed:15.000 rpm Power (ca.):15 kW Torque (ca.):130 Nm Taper:SK 40 NC-Swivelroundtable: A-Axis:+90°/-90° C-Axis:360° Clampingsurface:ø280 mm Tableloading (max.):300 kg In general: Toolmagazine:87 stations Rapid travers in X/Y/Z:35 m/min Rjdox Iyqfjpfx Aa Esck Equipment/Accessory: Positionsensor:Direct in X/Y/Z Chipmanagement:Chip conveyor Coolingmanagement:Internal cooling unit with Filter and Highpressure Workpiecemeasurement:Interface Infrared Touchprobe (Renishaw) prepared Toolbreakagecontrol:Laser Oilmistseparation:Mechanical extraction, Jakob Handte OE-D Setup operations:Electronic handwheel Further Equipment:Rinsing pistol

Condition: new, The KB 32 SFV PRO is a high-performance Column Drilling Machine from KNUTH, designed to deliver precision and efficiency for various drilling applications. This robust drill press features an automatic feed system and is particularly well-suited for single part productions and manual series work in both workshops and industrial settings. Made from premium high-quality cast iron, the sturdy base, column, table, and gear head ensure excellent rigidity and durability. The heavy, precision-ground work table is equipped with T-slots for optimal setup versatility. With an infinitely variable drive that boasts low maintenance, the KB 32 SFV PRO is complemented by a convenient touchscreen control panel. Operators can easily access functions such as spindle speed control and an electronically controlled quill feed. The integrated coolant system enhances performance, while the standard LED work light ensures optimal visibility. Experience the reliability of this drill press and enhance your operations—request a quote today to add the KB 32 SFV PRO to your drilling equipment lineup in the Column Drilling Machines category. Rcjdpfx Aeuyh Unea Ejk

Condition: like new (used), Year of construction: 2021, functionality: fully functional, For sale is an AMTEC welding and shrink machine, model MAXIshrink W20XL ECO, year of manufacture 2015. The machine is made of robust metal and designed for professional packaging applications. The well-maintained overall condition is clearly visible in the photos. The device appears to have seen little use and shows only minor signs of wear. The machine features: - large working area with film holder - adjustable transport and feed rollers - user-friendly control panel with regulators for sealing time and feeding length - sturdy hood with sealing frame - CE marking Rodpsx Nacwjfx Aa Eeck Manufacturer: BluePack Machines GmbH, Reinbek All components are fully assembled. No additional setup or dismantling is required. The machine will be delivered ready for operation.

Condition: good (used), Year of construction: 2000, operating hours: 48,804 h, functionality: fully functional, travel distance X-axis: 600 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 560 mm, controller manufacturer: Siemens, controller model: Sinumerik 840D, total length: 7,000 mm, total width: 5,000 mm, table width: 400 mm, table length: 500 mm, spindle speed (max.): 8,000 rpm, operating hours of spindle: 23,574 h, coolant supply: 50 bar, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, Very well-maintained 4-axis machining center from precision manufacturing. The machine has been serviced regularly, is immediately ready for operation, and comes with a pallet changer and extensive accessories. Ideally suited for tool and mold making or series production. Technical Specifications -Travel distances: X 600 mm / Y 560 mm / Z 560 mm -B-axis: 360° x 0.001° (60 rpm) -Spindle speed: 0 – 8000 rpm (stepless) -Control: Siemens Sinumerik 840D -Table size: 6 pallets, each 500 x 400 mm -Table load: 350 kg -Working feed: 1 – 60,000 mm/min -Rapid traverse: 60 m/min Tool & Magazine -Tool holder: DIN 69871-SK40 -Chain magazine with 90 positions -Max. tool diameter: 80 mm -Max. tool length: 350 mm -Max. tool weight: 10 kg -Max. total magazine weight: 450 kg -Tool change time: 5 sec -Pallet change time: 6 sec Machine Requirements & Dimensions -Motor power: 13 kW / 20 kW -Torque: 124 / 191 Nm -Total power requirement: 20 kW -Machine weight: approx. 16,000 kg -Required floor space (LxW): 7 x 5 m Equipment & Accessories -Coolant system approx. 1100 L (internal & external) -Knoll cooling unit with drum filter (30/40/50 bar via M-command) -Chip conveyor -Tool measurement: Renishaw probe -Tool breakage detection in the machining area -Pallet storage (4 positions) -Pallet sequence operation -Enclosed work area in accordance with UVV -Network capability -Technical documentation & installation layout available Components Renewed Rcedpfx Aajx Icyvo Eok -Hydraulic system motor & pump replaced -Some hydraulic and pneumatic hoses replaced -Control cabinet LT module exchanged -Drum of Knoll system replaced Operating Hours / Run Times - Power-on hours approx. 48,804 h (counter runs when the machine is switched on, including during setup, maintenance, or idle times) - Spindle run time total 23,574 h Special Features - Machine live, immediately ready for use - Inspection possible any time by appointment - No dealer sale – machine comes directly from production - Technically inspected, no known defects - Assistance with disassembly, loading, and transport possible (for an additional charge) All information has been provided to the best of our knowledge and belief. Subject to alterations, errors, and prior sale.

Year of construction: 2003, condition: ready for operation (used), Additional Equipment Scaffolding with cladding Work tank // Flood tank 1 // Condensate tank // Flood tank 2 Continuous distillation Automatic sliding door Water separator Bogie without cover Storage with drive Drying cooler Vacuum unit - drying process // Vacuum unit // Vacuum filling/emptying device HD - IFW Circulation filtration including chip rinsing This machine tool was manufactured in 2003. The Dürr Universal 71C features a comprehensive setup including a work tank, flood tank, continuous distillation, and an automatic sliding door. It also boasts a vacuum unit for drying, a condensate tank, and a drying cooler. Optional equipment like a control panel and ultrasound enhances its versatility. A great opportunity to buy this Dürr Universal 71C machine tool. For more information about this machine tool, please reach out to us. Rcodpfxsx D Snfe Aa Eek Application Types Other Machine Tools

Condition: good (used), Year of construction: 2014, lifting height: 30,500 mm, General information Mileage: 112.783 km Field of application: Construction Weights Empty weight: 7.240 kg Functional Lifting capacity: 320 kg Working height: 3.250 cm Condition Technical condition: good Visual appearance: good Other information Delivery terms: EXW Max. horizontal reach: 2090 m Max swing of arm in degrees: 180 Transport dimensions (LxWxH): 8,8x2,55x3,55 Production country: DE Additional information Rsdpsxbqicofx Aa Ejck Please contact Christian Theißen for more information Manufacturer: Ruthmann Type: T 330 Year of manufacture: 2014 Product type: Used Data: Max. working height: 32.50 m Max. platform height: 30.50 m Max. reach: 20.88 m Overall dimensions LxWxH: 8.80 x 2.55 x 3.55 m Platform dimensions LxW: 1.71 x 0.86 m Max. basket load: 320 kg Swivel range: 180° Support pressure: 56 kN Ground clearance: 0.15 m Vertical support width: 2.53 m Support width on one side: 3.86 m Support width on both sides: 5.30 m Support length: 4.87 m Unladen weight: 7,240 kg Driving licence: C1/3 Special features: Rotatable work basket, basket arm, rotation angle, WITHOUT roof protection, advantage: power connection in basket, loading area with tail lifts, box body, enormous lateral reach, automatic setup and retraction, greatest reach on 7.5 t chassis Note: New TÜV and UVV Location: 41468 Neuss immediately available

Condition: new, The FSM 14 S Tool Grinder by KNUTH is a robust machine designed specifically for the precise and cost-effective grinding of HSS and carbide milling cutters, ranging from 4 to 14 mm in diameter. This handy milling cutter grinder series stands out for its user-friendly operation, making it an ideal choice for any tool crib, where efficient tool maintenance is essential. The FSM 14 S features the capability to grind 2, 3, and even 4-blade cutters, with an additional station available for outer spiral cutting edge grinding. Included in the package are collets tailored for common cutter diameters—4, 6, 8, 10, 12, and 14 mm—along with high-quality grinding wheels that enhance your workflow. This machine ensures rapid tooling and quick setup, enabling you to maintain your tools effectively. Invest in the FSM 14 S Tool Grinder today and elevate your tool sharpening capabilities. Request a quote for this reliable Tool Grinder and ensure your cutting tools are always ready for use. Rcedpfsp Dtx Uex Aa Esk

Condition: good (used), Year of construction: 2005, operating hours: 32,099 h, functionality: fully functional, travel distance X-axis: 625 mm, travel distance Y-axis: 650 mm, travel distance Z-axis: 650 mm, controller manufacturer: Siemens, controller model: Sinumerik 840D, total length: 5,800 mm, total width: 4,800 mm, table width: 400 mm, table length: 500 mm, overall weight: 12,800 kg, spindle speed (max.): 10,000 rpm, operating hours of spindle: 3,648 h, coolant supply: 50 bar, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, For sale is a 4-axis horizontal machining center from the manufacturer Starrag. The machine is used, has been regularly maintained, and is in fully functional condition. Machine Details - Manufacturer: Starrag - Model: CWK 400D - Year of manufacture: 2005 - Operating hours: 32,099 - Control: Siemens Sinumerik 840D - Machine weight: 12,800 kg - Footprint (LxW): 5.8 x 4.8 m Technical Data Travel paths: - X = 625 mm - Y = 650 mm - Z = 650 mm - B axis: 360° (0.001° increments) / 100 rpm - Spindle speed: 50 – 10,000 rpm (stepless) - Motor power: 24 kW / 37 kW - Torque: 250 Nm / 350 Nm Table & Pallets - 2 pallets, each 500 x 400 mm - T-slots to DIN 55201 - Load capacity: 400 kg - Pallet changer included (changeover time 8 s / 5 s) Tool Data - Interface: DIN 69893-HSK-A63 - Chain magazine with 60 tool positions - Tool diameter: 80 mm (up to 160 mm with adjacent pockets free) - Max. tool length: 350 mm - Max. tool weight: 10 kg - Total tool weight: 200 kg Equipment & Extras - Coolant system (emulsion, internal & external supply, approx. 1100 L) - Knoll coolant unit with fleece filter (30, 40, 50 bar) - Measuring probe: Renishaw - Tool breakage monitoring in magazine - Chip conveyor - Flood wash, paper band filter, cleaning gun at setup station - Fully enclosed working area to UVV safety standards - Pallet sequence mode - Network connectivity, Ethernet interface - Technical documentation & layout plan included Rcjdpfx Aaex Ib T Ie Ejk Maintenance - Carried out regularly - Machine is fully functional All details have been prepared to the best of our knowledge and belief. Subject to changes, errors, and prior sale.

Year of construction: 2010, condition: ready for operation (used), Main Drive Number of axis 3 This 3-axis Mitutoyo Quick Scope QS-250 Z was manufactured in 2010, featuring a joystick box, various clamping lugs, and profile strips for versatile setup options. It includes MAG1 mounting and both short and long spring clips for precise optical measurement tasks. Consider the opportunity to buy this Mitutoyo Quick Scope QS-250 Z optical measurement machine. Contact us for further details regarding this machine. Application Types Rjdpfx Aaox D D Abj Esck Measuring

Condition: new, The SB E 2060/2 is a robust Manual Folding Machine from KNUTH, designed to meet the demands of the Folding Machines category in the Manual Folding Machines group. With its sturdy cast-iron construction, this machine efficiently handles bending operations for large plates up to 2000 mm in length and a maximum plate thickness of 2 mm. Featuring a long male die stroke and a one-piece male die, the SB E 2060/2 ensures precision and durability in every application. The high counterweight facilitates easy bending, making it versatile for various tasks. Additionally, it comes with an operator manual to assist users in setup and safety. For those interested in reliable and powerful performance in sheet metal processing, this machine stands out. Ready to enhance your productivity? Request a quote today for the SB E 2060/2 and experience the benefits of a robust Folding Machine. Rcjdpfxen Tlg Ie Aa Ejk

Year of construction: 2014, condition: ready for operation (used), General Data Measurements width 2260 mm Measurements depth 8950 mm Measurements height 4050 mm Machine weight 3900 kg This FOREL VW2800AO was manufactured in 2014. It features a comprehensive setup for glass processing, including edge deletion, inspection, frame placement, assembly, gas filling, pressing, spacer application, and sealing capabilities. Dimensions are substantial with a length of 8950 mm and height of 4050 mm. It operates under continuous conditions, adhering to CEI EN 60204-1 standards, with a total installed power of 35 kW. Contact us for more information about this machine. Rcjdsx D Dxiopfx Aa Esk Application Types Other Machine Tools

Condition: new, The VHF 2.2 is a powerful Conventional Vertical Milling Machine from the renowned KNUTH brand, designed for versatility in Universal Milling Machines. This machine features large travels and a vertical and horizontal spindle, each with separate drives, providing robust machining capabilities. The vertical head swivels ±45° and includes a movable quill, making it ideal for various tasks in repair or training shops. It boasts a high-strength cast-iron machine bed, precision-ground guideways, and a sizable milling table setup area of 1,270x280 mm. With an automatic feed system on the X and Y axes, operators can maneuver effortlessly. The standard equipment includes an outer arbor support, coolant system, and work lamp, ensuring a comprehensive setup for efficiency and comfort. With its excellent price/performance ratio, the VHF 2.2 stands out as a precise and reliable choice in the Conventional Vertical Milling Machines category. Don't miss the opportunity to enhance your machining capabilities; request a quote today. Rcodpfx Aouzll Hea Ejk

Year of construction: 2023, operating hours: 50 h, condition: ready for operation (used), General Data Measurements width 1300 mm Measurements depth 1900 mm Measurements height 2500 mm Machine weight 2000 kg Main Drive Number of axis 6 Additional Equipment Vice Pallets: 18 Rcjdpsx D E Ncsfx Aa Eek Safety Package: Movable safety fence and safety software Shelving System: Adjustable levels for up to 18 pallet spaces Valve Terminal: For controlling external elements This 6-axis WU Automation RZ-3/35 was manufactured in 2023. A versatile robot cell with a compact design, it features a 6-axis robot capable of handling up to 35 kg. It includes an intuitive graphical interface, Schunk NSR 100 and JGP 125 gripper systems, and a safety package with movable safety fence. Ideal for efficient, flexible operations with minimal setup times. Compatible with all Hermle machines. If you are looking to get high-quality automation capabilities consider the WU Automation RZ-3/35 machine we have for sale. Contact us for more information. Application Types Other Automation Equipment

Condition: new, The HB 250 A is a compact Horizontal Mitre Cutting Bandsaw, designed by KNUTH to efficiently handle a variety of cutting tasks in any workshop. This robust machine features a cast-iron, one-piece saw frame that is ideal for making precise miter cuts. With the operator moving the saw frame instead of the material, it enhances both convenience and accuracy. The hydraulic cylinder allows for infinitely variable support pressure and smooth sawing with optimized cutting through two speeds. The quick-action clamping vise ensures swift setup and secure material handling, making your operations seamless. Equipped with a coolant system, base, one saw blade, and comprehensive operator instructions, the HB 250 A ensures reliable performance in the Industrial Saw category. If you are looking for a reliable and powerful tool, you can request a quote for this Horizontal Mitre Cutting Bandsaw today. Rjdpfxeu Abugo Aa Ejck

Condition: ready for operation (used), Year of construction: 2010, Movement Rcjdpfx Asx D Dy Hea Eek X-Axis Movement 3000 mm Y-Axis Movement 600 mm Z-Axis Movement 800 mm B-Axis Movement ±105° C-Axis Movement 360° Additional Equipment Turning Package: Enables high-precision turning operations in combination with standard milling, facilitating turning and milling in a single setup. This 5-axis Matec 30 HV mill-turn centre was manufactured in 2010. It features a traveling column with 3,000 mm X-axis travel, 600 mm Y-axis, and 800 mm Z-axis. The B-axis swivels ±105° and the C-axis rotates 360°, supporting complex geometries. Equipped with a Bosch Rexroth IndraMotion 10 control unit and a rotary table speed of 500 RPM, it enables precise turning and milling operations. For more information about this mill-turn centre, please reach out to us. Application Types Milling

Year of construction: 2014, operating hours: 100 h, condition: ready for operation (used), General Data Measurements width 1000 mm Measurements depth 4500 mm Measurements height 1800 mm Machine weight 2200 kg Control Unit Brand FANUC Model 31t- Model B Rodox D H Sfjpfx Aa Eock Controller Brand FANUC Model 31i B Main Drive Spindle speed range 5000 Number of axis 3 Workpiece Workpiece weight 4.5 kg Additional Equipment Automatic bar loading magazine with adjustable part length and bar diameter Remnant extraction system Guide channel made of polyurethane plastic Displacement system for longitudinal movement This 3-axis EMCO MaxxTurn 65 SMY was manufactured in 2014, featuring a robust FANUC 31i B control system and a dual spindle setup with C and Y axes for complex machining. It includes a 12-position tool turret and a bar feeder with a capacity of 65 mm diameter and 3200 mm length. Ideal for precision turning and milling, this machine offers a comprehensive solution for advanced metalworking. Contact us for more information about this machine. Application Types Turning

Year of construction: 2002, condition: ready for operation (used), General Data Measurements width 1150 mm Measurements depth 1460 mm Measurements height 2260 mm Machine weight 900 Rjdpfx Ajx D Sdyea Esck Main Drive Number of axis 3 Movement X-Axis Movement 350 Y-Axis Movement 250 Z-Axis Movement 345 Workpiece Workpiece weight 450 Table Outer length 600 Outer width 300 This 3-axis CHARMILLES HD10 start hole drilling machine was manufactured in 2002. It features a work table size of 600x300mm, XY-travel of 350x250mm, and can handle a maximum workpiece weight of 450kg. Ideal for precise erosion tasks, the CHARMILLES HD10 machine we have for sale represents a robust addition to any machining setup. Contact us for further details regarding this machine. Application Types Other Machine Tools

Condition: ready for operation (used), Year of construction: 2005, General Data Measurements width 4800 mm Measurements depth 5800 mm Machine weight 12800 kg Control Unit Brand SIEMENS Model Sinumerik 840D Main Drive Spindle speed range 10000 Spindle motor power 24 kW Number of axis 4 Movement X-Axis Movement 625 mm X-Axis Rapid Traverse 40 m/min Y-Axis Movement 650 mm Y-Axis Rapid Traverse 40 m/min Z-Axis Movement 650 mm Z-Axis Rapid Traverse 40 m/min Table Table load 4000 kg Tools Max weight 10 kg Max tool diameter 80 mm Max tool length 350 mm Type of tool holder DIN 69893-HSK-A63 Media Rsdpfx Aaox D H S Se Esck Chip conveyor Yes Additional Equipment Renichaw measuring probe Tool breakage detection: Yes, in tool magazine Flushing gun at the setup station Waterfall shower Paper belt filter Pallet sequential operation Enclosed work area enclosure according to UW Computer connection via Ethernet interface Network connection This 4-axis Starrag Heckert Dynamic CWK 400D was manufactured in 2005. It features a Siemens Sinumerik 840D control system, spindle speeds up to 10,000 rpm, and a dual pallet system with rapid 8-second pallet changes. The machine includes a tool magazine with 60 positions and a high-capacity coolant system. Ideal for complex machining tasks. Contact us for more information about this machine. Application Types Milling