Used Second Operation for sale (28,261)

Condition: good (used), Bluhm Weber Legi-Air-4050S Labeling Machine 4.14.1 Basic Structure The system is designed as a closed aluminum profile frame and has a very compact design. The control cabinets are integrated into the lower part of the frame. The main valve manifold is located behind a service door below the control panel. The system includes four workstation stops. Operation is via a touchscreen. The control panel is mounted on the right side of the frame. A Bluhm Weber labeling system is used in the station; the Bluhm Weber documentation applies accordingly. 4.14.2 Operational Sequence Iodpfxoibh Tkj Afnoan - The incoming workpiece carriers with I/O modules are stopped, lifted (positioned), and contacted in substations 10.1 and 10.2. In these two stations, the I/O modules are automatically labeled. In substation 10.3, the I/O modules are automatically labeled. Label generation and content creation are automated, as is application to the devices. - After labeling is complete, the module is finalized in station 10.4. For this, it is stopped, lifted, and contacted. Following finalization, the workpiece carrier is automatically ejected from the station. Legi-Air 4050 RH Label Print and Apply System with Zebra ZE500-4 Print Module Motor-driven large roll unwinder Label rolls with a diameter of up to 430 mm and 900 linear meters of label web ensure long continuous production runs. Tandem operation ensures uninterrupted production. Applicator dies Quickly interchangeable applicator dies allow for the processing of label sizes ranging from small nameplates to DIN A5 EAN128 shipping labels. The Quick-Change option allows for format changes in seconds. Spring-loaded applicator dies compensate for uneven product surfaces, ensuring clean label application. Controller Bluhm Weber Standard Controller Zebra ZE500-4 Print Module Label Printer Standard Features • Print Methods: Thermal Transfer or Direct Thermal • Orientation: Right or Left • All-Metal Industrial Construction • 16 MB SDRAM, 64 MB Flash Memory • Applicator Interface • Transmissive and Reflective Media Sensors • Multi-Level Element Energy Equalizer™ (E3™) for High Print Quality • Real-Time Clock • Rotating Display • ZPL II™ – Universal Language for Zebra Printers Technical Specifications Maximum Print Width • 104 mm Media Specifications • Label and Carrier Width: 16 mm to 114 mm • Minimum Retraction Length: 13 mm • Minimum Non-Retraction Length: 6.5 mm • Minimum Stream Mode Length: 6.5 mm • Maximum Length: 990 mm • Maximum Continuous Media Length: 3810 mm mm • Ribbon width: 25.4 mm to 107 mm Resolution • 8 dots/mm (203 dpi) or 12 dots/mm (300 dpi) Maximum print speed • 305 mm per second (203 and 300 dpi) Technical specifications • Width: 245 mm • Depth: 379 mm • Height: 300 mm • Weight: 15.4 kg Financing through our bank is also available. komplett-konzept.leasingo.de Further assembly modules in other sizes – new and used – can be found in our shop! International shipping costs on request!

Condition: excellent (used), Year of construction: 2008, SSI Schäfer Roller Conveyor System The price already includes over €25,000 in dismantling costs. The 8 roller conveyors shown in the second image are not included in the delivery. Logistics Center - Conveyor Belts, Roller Conveyors & Spare Parts. Excluding peripheral equipment such as printers, scanners, binding machines, shelving, etc. Isdpfxsk Hz Das Afnoan Over 3 floors Year of manufacture 2008 Extensive documentation Further images, sketches, and videos are available; we will gladly send you a link upon request. The Schäfer roller conveyor system is a state-of-the-art conveyor system specifically designed for the efficient and precise movement of goods and products across multiple floors. With its robust construction and intelligent control system, the system offers a reliable and flexible solution for internal transport in production facilities, logistics centers, and warehouses. The roller conveyor system consists of a series of rollers arranged horizontally and vertically to ensure seamless movement of goods between different levels. By using individually adjustable rollers and various conveyor belt types, the system can be adapted to the specific requirements of each customer. The Schäfer roller conveyor system features intelligent controls that allow for precise monitoring and management of the transport process. The control system can automatically adjust various settings and operating modes to ensure optimal performance and seamless integration into existing production processes. The system is easy to install and maintain and can be easily adapted to different spatial and floor layouts. The Schäfer roller conveyor system offers a reliable and effective solution for the internal transport of goods and products across multiple floors, making it an ideal investment for companies looking to optimize their internal transport and increase productivity. Financing through our bank is also available. komplett-konzept.leasingo.de Find more items – new and used – in our shop! International shipping costs available upon request!

Condition: good (used), functionality: fully functional, Year of construction: 1990, This high-performance swing bending machine RAS 67.30 with single-program control comes from first ownership. Bending capacity: 3200 x 2.5 mm Drive power: 3 kW Machine weight: 3800 kg Includes pre-selection of bending angle via rotary potentiometer, second footswitch for two-person operation, continuous 45° upper bending bar, segmented/split and raised upper bending bar H = 100 mm Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 Iasdpfexmi Hdex Afnjn DE - 44143 Dortmund - Wambel / Germany

Condition: ready for operation (used), Year of construction: 2022, operating hours: 1,790 h, spindle speed (max.): 6,000 rpm, spindle motor power: 11,500 W, number of axes: 2, This Okuma LT2000-2T1MY was manufactured in 2022. It features two 22KW spindles, a 32-station BMT55 turret, and an OSP-P300LA control system with OSP and ECO suites. It includes a Samsys short bar loader, high-pressure pump, and tank. The machine offers 4-axis machining capabilities with Y-axis in the upper turret and is equipped with a 15" color LCD TFT multi-touch screen. If you are looking to get high-quality turning capabilities consider the Okuma LT2000-2T1MY machine we have for sale. Contact us for more information. Additional equipment • 22KW Okuma Spindle Main an Sub • 70mm max Bar Capacity Main Spindle and Bar Feeder Samsys • 2 turrets, each 16 stations, BMT55, live tools • proven and extremely sturdy and stable OSP300 Iodsyh Ntlepfx Afnjan • 80 bar Okuma high pressure package (Japan factory fitted stronger seals), on both turrets. Ideal e.g. for deephole drilling in inox, titanium, inconel. • In excellent conition, geometry very good. Okuma serviced and geometry report upon sale. • Automation: Samsys short bar loader • Extra Features: High-pressure pump & tank, high-pressure seal kit, workpiece removal arm, tool height correction in the Y-axis, coolant tank and pumps, detachable wired handwheel, tool monitoring, programmable face printing, and Hi-Cut Pro for driven tools • two BMT55 revolvers with 16 stations each Machine Benefits Technical Machine Benefits • Features: reduction of machine-related idle times, harmonic speed oscillation, automatic speed synchronization, and remote diagnostics during warranty • Machine hours: 2268 • Z taper: 140 mm • Front bearing diameter: 100 mm • Torque: 183 nm • Y-axis: y-axis in the upper turret with a movement range of +50/-45 = 95 mm • Helical interpolation: available with x/y/z linear axes, including eccentric milling with x/y/c axes • Tool monitoring system • Tool corrections: 96 tool corrections per turret Extra Information • Spindle Orientation: Electronic spindle orientation +/- 0.1 Memory: 2 GB part program memory with a maximum program length of 2 MB Data Management: MacMan machine management with integrated production data acquisition Control Unit Control System: CNC double turning center with a control system featuring OSP suite with numerous apps and ECO suite energy-saving features Display: 15" color LCD TFT with 3D color graphics and a multi-touch screen/panel Operating System: Second Windows operating system for operation and data communication Controller Ports: 2 USB 2.0 ports on the control panel Communication: Ethernet/LAN interface with browser and DNC-T1 for program transfer Turret Tool Stations: Upper and lower turrets each with 16 driven tool stations Motor Power: 5.5 kW per motor Speed Range: 50 - 6000 rpm Torque: 22.5 Nm Number of axes Upper turret: X/Y/Z/C (turret can be used both left and right, of course) Number of axes:Sub-spindle (right): lower turret XZC (turret can be used both left and right) chuck main spindle (left) Hainbuch mini 'Axzug' 65 (pull) Maximum clamping diameter on the main chuck (65 mm) chuck secondary spindle yes, Hainbuch mini 'Axfix' 65 (fixed, ideal for part relay into right hand spindle) Maximum clamping diameter on the main chuck (65 mm) Transformer included Inspection is available from 2023. Machine is in great condition and within geometry Maintenance protocol is available • 2x 22 kW PREX spindle, spindle passage on the left side sufficient for 70 mm bars. Mounted chucks: Hainbuch 65 Axzug and Axfix. • 2x 16-station turret, BMT55, top left with Y

Condition: good (used), Year of construction: 2003, Tilting panel saw Altendorf F45 with ELMO IV-plus package, 2-axis scorer, 3m table, and Control-Plus control Sliding table length: 3000 mm Saw blade tilting from 0 to 45 degrees Speeds: 3000, 4000, 5000, and 6000 rpm with electronic speed display Drive motor: 5.5 kW with automatic motor brake Control panel at eye level with Control-Plus control 4-axis CNC controlled Cutting of chain measurements and grooves on the rip fence and crosscut fence Cutting width correction on the rip fence and crosscut fence with tilted saw blade 600 cutting programs Calculator function with direct transfer of results to the respective axis Tool management Saw blade diameter up to 450 mm Max. cutting height: 150 mm Cutting width up to 1040 mm, electrically adjustable Tilting angle and height adjustment electrically adjustable Crosscut fence rail up to approx. 3210 mm, electrically adjustable, automatic coupling of the second stop flap for large dimensions Folding rip fence Extraction outlets: 120 + 80 mm Sliding carriage lockable Additional mitre fence rail 2 used saw blades and one scorer blade 2 riving knives 2-axis scoring unit, electrically adjustable during operation 2 blade guards 3 emergency stop switches Clipboard at the control panel CE marking Machine shows signs of wear. No cuts in the sliding table. Iedpfxjxw Ii Se Afnean Original paint (special paint finish), partially repainted in some areas. Machine has 18,985 operating hours. It originates from a furniture factory and has been regularly serviced and well-maintained. Condition as per original photos. A video of the machine in operation can be provided upon request. Approx. dimensions: 3150 x 3750 x 1900 mm (L x W x H). Weight approx. 1400 kg. The machine can be demonstrated on site by appointment. We only offer machines that are ready for demonstration in our warehouse, see "other offers from this seller".

Condition: used, machine/vehicle number: 007354, Type of edging: Thin edge, Thick edge Gluing System: EVA Hotmelt Iedpfxoyg Edao Afnoan Corner Rounding Unit: yes Combination Squaring Edgebanding Machine: First and Second Pass Max Panel Width: 240 mm Max feed speed: 40 m/min Operating Units Right Side: 9 nr Operating Units Left Side: 9 nr

Condition: excellent (used), Bosche volume scale 3D Silence 600 Volume and weight recording for master data recording and master data maintenance in the warehouse Precise volume and weight measurement for warehouse management and order picking. Non-contact measurement with laser sensors Weighing range up to 150 kg Easy integration into IT systems Ideal for precise freight calculation and master data recording ✔ Professional weighing technology ✔ Original BOSCHE quality Fast - Accurate - Reliable Features of the volumetric scale Static volume measurement of parcels Fast, non-contact dimensional measurement of packages Measuring frame made of powder-coated steel Low construction height for easy placement of parcels Weighing range 30 kg, 60 kg or 150 kg (weighing accuracy up to 10 g) Reliable weighing thanks to three calibratable, laser-welded load cells Three high-quality laser distance sensors with laser class 2 Measuring accuracy up to 1.5 mm Maintenance-free and wear-free design of the weighing technology Simple handling with high ease of use Easy integration into merchandise management and shipping systems Direct connection to existing PC systems via USB interface (or optionally via W-LAN) Data transfer to higher-level IT systems or WMS (warehouse management systems) in modern languages (SQL, CSV, REST) Simple process integration thanks to WINDOWS 10 operating system (WINDOWS network client) Intuitive software provides all data at a glance Weighing platform (powder-coated steel) 3 high-precision load cells (BOSCHE) Digital cable box with interface output Power supply via mains adapter Measuring stops for measuring non-cubic objects Ijdpfx Afsvtmp Tsnsan Area of application Parcel measurement => length x width x height => girth => volume measurement (accuracy to 1.5 mm) Master data acquisition - freight checkpoints Air freight control - Freight acceptance Packaging planning - calculation of packaging sizes for optimal shipping Capacity planning - planning of storage locations Profitability check of storage space and packaging processes Optimized forklift trips Best possible storage space utilization for trucks Master data acquisition in seconds: height, length, width, weight Weighing technology - measurement technology The scale platform is connected to a Windows PC via an interface. The software included in the scope of delivery visualizes weight and dimension data directly on your Windows computer. The calculated volume and volume weight are also displayed. Construction The extremely flat weighing bridge substructure made of powder-coated steel is extremely robust. It is equipped with three laser-welded load cells. Volume measurement is provided by three high-quality laser distance sensors of laser class 2, which measure the length, width and height of the package to an accuracy of 1.5 mm. For optimum integration into your processes, the BOSCHE 3D scale is available in three different sizes. Weighing range: 30 kg, 60 kg or 150 kg. Supplied without software HxWxD = 1000 x 780 x 780 mm Product video Volume scale 3D Silence: List price € 8,663.00 gross Software VolumeScannerProfessional: 1.236,00 € gross Financing through our bank is also possible. komplett-konzept.leasingo.de You can find more items - new and used - in our store! International shipping costs on request!

Condition: new, Assembly line consisting of: Item 1.0 / RU-CBM 4000 work table with running rail extended by 500mm for additional assembly an aluminum holder screwing machine for RU-CSA-SMB or RU-CSA-SMZD with RU-SH special screwdriver, support table Length 4000 mm, width 1400 mm, inclination of the working platform manually adjustable. Holder for fitting scissors or fitting punch. 16 pieces of swiveling counter-holders for hanging the wings, completely pneumatic Foldable for unhindered movement of the wings on the table surface. Device for scanning the sash fitting length for constant and variable/central gear seat for already drilled wings, colored Dimension recognition of the fittings. RU-SH, special screwdriver with pneumatic depth switch on carriage mounted, safety control, pneumatic height adjustment, Screw feeder with automatic shutdown of the filling container (Manual insertion for a second screw length on the special screwdriver upon request). RA-8, turret stop for 8 screw levels mounted on the carriage. RA-4, turret stop for 4 different wing widths Swivel table mounted. Pneumatic wing measurement sensing. operated, scanning range up to 2500mm simultaneous clamping of the scanning. PSF - Pneumatic tensioning device for sashes. Working height adjustable from 900 - 1000 mm. Support table covered with felt. Running rail extended to the left by 800 mm. Item 1.1 / 5035-1 Iajdpjd Ih Huofx Afnsn Pneumatic swivel device of the work surface with foot valve Item 1.2 / 0500000 Holder matched to customer punch/scissors. For mounting a hardware punch provided by the customer or Fitting shears (third-party manufacturer) on the sash assembly table. Please specify make when ordering!!! Item 1.3 / 5597-7 Driving device for RU-CBM on semicircular rails. The castors are on the left and right of the base frame of the table mounted. Item 1.4 / 6354-6 3 double meters of semicircular rails 30 x 10 mm. Item 1.5 / 0730000 RU-SBL3000/40 free-standing fitting bearing, Length 3100 mm, depth 1250 mm, height 2200 mm, Stand frame on the front without supports, 40 compartments, divided into 10 compartments in a row by dividers and a continuous shelf at the top, Compartment size: width 280 mm, height 150 mm. Item 2 RU-CSA-SMB aluminum holder screwing machine with automatic Screw feeding and manual feeding of the aluminum holders from one traveling box with pneumatic positioning device, Screwdriver with depth cut-off with 4-fold turret stop. Pneumatic adjustment device in the y direction against 2 pieces 6-fold Revolver attacks. Feed container for manual feeding of rotary holders or clip holder in square shape 18.5 x 18.5. The holder is manually pushed into a channel in the box and with positioned in front of the screwdriver mouthpiece using a pneumatically operated slide. Profile depth max. 150 mm, screw spacing in the y direction max. 120 mm. Item 3 RU-S48-A6-350 column slewing crane for chain hoist, with 6 m aluminum boom Version with column, smooth-running boom and sliding chassis for swivel and trolley travel manually by pulling and pushing the load. Projection 6 m Construction height 4,461 m Lower edge of boom 3.722 m (top edge of boom 3.9 m) Swivel range max. 270° Painting of the steel construction in RAL 7035 The base plate is attached to the on-site hall floor At least 250 mm thick. Designed, of course, according to the valid STANDARD EN 13155 Warra...

Condition: refurbished (used), filter area: 459 m², pressure: 15 bar, cake thickness: 30 mm, Plant: Chamber filter press, tunnel design, second-hand Design: head-guided Filter plate format: 1200x1200 mm Number of chambers: 100 Cake thickness: 30 mm Filter plates: PP Filter cloths: optionally available in coordination with the medium Drain: closed Filter area: approx. 459 m² Press capacity: approx. 2999 dm³ Filter pressure: 15 bar Closing pressure: 380 bar Operating temperature: min. 10° max. 50° Plate transport: automatic Iaedpfx Aeqa Dv Tefnon Closing: electro-hydraulic Motor voltage: 380 V Control voltage: 230 V - 24 V Control cabinet: included Accessories: optional according to customer requirements and design Safety device: optional Condition: This system is available as a used system - ready for operation. Refurbished service: optional - The system is refurbished after receipt of order. Special service: optional - The system is set up according to your requirements after receipt of the order. Purchase or rental: Viewings of the systems by arrangement at our factory.

Condition: ready for operation (used), functionality: fully functional, The Kerslicer KR 1000-120 Kaufler slicer is designed for industrial environments requiring consistent and precise food product slicing. It ensures uniform cutting, which contributes to the homogeneity of final products. This enables production lines to maintain stable quality throughout the process. Additionally, the French-engineered design guarantees robustness suited to industrial throughput rates. This slicer integrates easily into existing lines, as its format is optimized for continuous operation. The stainless steel frame facilitates cleaning and meets the hygiene standards of the food processing industry. Moreover, its ergonomic layout allows for straightforward operation by your staff, keeping production workflows smooth and without complicating daily operations. The KR 1000-120 model is based on a reliable mechanical design aimed at minimizing unplanned downtime. Maintenance procedures are straightforward, ensuring high machine uptime. Regular, accurate slicing also helps minimize product waste during cutting, which in turn increases the overall efficiency of your installation. Offered second-hand by Europ’Equipement, the Kerslicer KR 1000-120 is identified by its manufacturer’s plate and is inspected before being put back into service. This ensures you receive a traceable machine that is ready for immediate use. Refurbishment reduces upfront investment while providing a dependable and industry-compliant solution. As a result, this slicer is a cost-effective choice for optimizing production while maintaining cost control. Technical specifications: - Belt width: up to 1000 mm - Direct inline feed - 304 stainless steel construction Iaedpfxoygvhie Afnon - Power supply: 400 V three-phase - Power: 5.5 kW (SEW variable frequency drive) - Dimensions: 2,660 × 1,315 × 1,950 mm - Weight: 1,400 kg - Year of manufacture: 2005 - Electrical connection: 400 V r269LX-c

Condition: new, Year of construction: 2026, Sawblade width max. 120 mm Weight 350 kg Motor output 1,3 kW WINTER AUTOMATIC BAND SAW GRINDING MACHINE BANDSAWMAX 120 PNK-AB PNK-AB is specially designed for grinding the teeth of various band saw blades used in various forms, width and thickness. Compact and rigid grinding unit moving on linear bearings of PNK-AB machine provides precise and stable grinding Technical specifications: - Band Saw Width 15-120mm - Tooth pitch Max. 60mm Tooth depth 0-30mm - Tooth forms PV,NV,KV,PU,NU - Hook angle -10° to +30° - Feeding rate 0-90 teeth/min. - Motor quantity 2 - Grinding wheel motor – 1.1kW, 1400 r.p.m. - Gearbox motor double-rev. – 0.55kW, 1400 r.p.m - Grinding wheel diameter Ø250mm - Grinding wheel bore diameter Ø20mm - Grinding wheel thickness 8mm/10mm/13mm (depending tooth pitch) - Operating voltage 400V, 3Ph, 50-60Hz - Total power ~1,3kW - Dimensions 80*120*175cm - Net/gross weight 350/375kg PNK-AB General Features: - Automatic grinding of band saw blades up to 120mm width. - Grinding wheel riding on linear rails. - Non-corroding and hardening plating on all mechanical components. - On/off switch. - Max 60mm tooth pitch. - Ease of use. - Minimum space required. - Fast and precise grinding of NV,PV and KV tooth forms. Iaedpfxsyk Ib Ao Afnen - Manual central lubrication. - Manual saw holder and blade lifting system. - Optional circular(HSS) and gang saw grinding attachments. - Production conformed with CE standards Capacity: Grinding up to 30 band saws per day. Optional supplements: - CBN Woodmizer wheel nett price EUR 375,- - Diamond wheel for Bimetal nett price EUR 520,- - Bakelite wheel 13mm nett price EUR 75,- - Ceramic wheel 16mm nett price EUR 115,- - CBN grinding wheel nett price EUR 1.125,- - Spare Index Finger nett price EUR 70, - Index finger pin nett price EUR 20,- - Wheel dresser attachment nett price EUR 1.170,- - Wheel dresser diamond nett price EUR 100,- - Circular (HSS) saw grinding attachment nett price EUR 960,- - Frame saw grinding attachment nett price EUR 2.700,-/1meter - Coiler and uncoiler system for band saw manufacturers nett price EUR 5.800,- - Sealed packing nett price EUR 570,- - Attachment for double side saws nett price EUR 1.560,- - Pneumatic system for second indexing finger nett price EUR 1.140,- - CAM for GD tooth profile (WM) blades nett price EUR 330,-

Condition: used, Year of construction: 2020, operating hours: 3,415 h, lifting height: 10,890 mm, fuel type: electric, mast type: duplex, fork length: 1,200 mm, color: other, Empty weight: 9.200 kg Lifting capacity: 1.200 kg Iaodpeyc Smyjfx Afnon Price: On request What are Presale Items at Second Owner? Presale items are machines that we sell in their current condition ("as-is"). We have purchased these machines based solely on photos and sell them with the information provided in the advertisement. Unfortunately, we do not have additional details, such as exact dimensions or machine specifications. Additionally, these machines are often not yet in stock and have not been inspected by us. These machines are offered at competitive prices, which means the prices are lower than usual, but the risk lies entirely with the buyer. Please carefully review the information in the advertisement before making a purchase. If you have any questions, feel free to contact us! - Year: 2020 - Documentation available: Yes - CE marking present: Yes - CE certificate present: No - Serial number: 612334X00160 - Operating hours: 3415 - Working level: Hoog - Lifting capacity: 1200kg - Lifting height: 10890mm - Overhead clearance: 6000mm - Fork length: 1200mm - Options: Man-Up - Mast: Duplex - Drive: Electric - Brand/Type: 04EPZS0620SC - Battery year of construction: 2020 - Capacity: 620Ah - Battery voltage: 80V - Transport weight [kg]: 9200kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Tess van den Boom

Condition: ready for operation (used), The Hobart UX60EHB dishwasher is designed for professional environments that require consistent and controlled dishwashing. This pass-through model ensures regular cleaning throughout the day, helping to maintain a stable hygiene level. Thus, washing operations can be seamlessly integrated into the dishwashing station workflow. Additionally, Hobart’s design ensures reliability suitable for intensive use. Thanks to its pass-through configuration, this dishwasher makes loading and unloading baskets easy. Its stainless steel construction offers excellent durability against wear from repeated use. Furthermore, the compact footprint allows for straightforward integration into existing commercial kitchens, ensuring uninterrupted workflow without major constraints. The UX60EHB is built on a robust design for long-lasting performance. Routine maintenance tasks are accessible and quick to perform, and the simple controls provide immediate usability for operators. As a result, the machine secures the dishwashing process and minimizes operational downtime. Offered second-hand by Europ’Equipement, this Hobart UX60EHB dishwasher is identified by its manufacturer’s plate and inspected before re-commissioning. This ensures the user receives a professional-grade machine ready for immediate operation. Furthermore, purchasing a used machine helps reduce capital expenditure while maintaining reliable equipment. Therefore, this model offers a cost-effective solution that meets professional requirements. Technical specifications: Serial number: 86181063 Dimensions (W, D, H in mm): (1450, 920, 2000) Maximum height in mm: 2860 Order number: 504316 Year of manufacture: 1998 Power supply: 400 V – 50 Hz Installed power: 22.2 kW Rated current: 39.5 A Marking: CE Isdpfx Afoyglw Honoan BU3PDXTU

Year of construction: 2013, condition: used, We offer you a used PET bottle crusher of the manufacturer BOREMA, type R-1200 F, year of construction 2013, for residual emptying, deaeration and pre-compaction of the fed PET bottles, from 0.3 up to 2.5 l content. The machine has a chassis and can be moved into and out of the feed chute of your baler. The machine has a throughput capacity of approx. 85,000 bottles/h, corresponding to approx. 3t/h. Iajdpfx Afeu Thpnsnjn We have the following technical information: Manufacturer: BOREMA Umwelttecjhnik AG Type: R-1200 F (with trolley for retracting and extending) Year of manufacture: 2013 Drive power: 11 kW Connected load: 15 kW Rated current: 32 A Back-up fuse: 40 A Type of construction: Continuous system Function: Double rotor press system Rotor pretension pneumatic: approx. 16t Overload protection: by anti-blocking system Input material: PET disposable and returnable empty bottles 0.3 to 2.5 L capacity Input material: HDPE bottles and canisters up to 3 l capacity Throughput capacity: approx. 3 t/hour, corresponding to approx. 85,000 bottles/hour, depending on size Required compressed air output: G1/2", 8 bar, 40 l/min. Compression ratio: 1:3 Flange dimensions inside: 972 x 1220 mm Feed opening: 565 x 1280mm Weight: approx. 2500kg Possible applications: Due to the chassis, the PET flattener can be moved into the feed chute of your baler as required, thus ensuring residual emptying, venting and pre-compaction of the fed bottles and canisters. When the material is changed, the PET flattener is simply moved out of the feed chute again and paper, cardboard, film, etc. can now be pressed further without using the flattener. Process of the BOREMA PET crusher: The plastic packages are drawn in by two rotating shafts. One of the rotating shafts is pneumatically pretensioned by two air bellows and presses the PET bottles with 16 t of pressure against the second rotating shaft. In the process, the closed plastic bottle is squeezed together, caused to burst and vented. Residual liquids run out and the material falls into the baler in a precompressed state. When impurities are introduced, the pneumatically pre-tensioned shaft deflects to the side and the impurities are channeled through. Significant advantages compared to conventional PET perforators with punching mandrels or knives: The BOREMA process is much more efficient and less subject to wear than conventional PET perforators with punching mandrels or knives. The biggest advantage is that any foreign matter such as metal parts, stones, bottles with frozen contents and pieces of wood are passed through the pneumatically deflecting rotor shaft without stopping the operation of the system or causing any major damage. With conventional perforators, mandrels or blades sometimes break off or become so jammed with the interfering material that the plant has to be shut down and repaired at great expense. Comments: The crusher is in good condition, was dismantled from the running operation, stored, is available at short notice and after assembly immediately ready for use. The documentation (manual, CE, electrical/hydraulic circuit diagram) is complete. An inspection is possible by arrangement. The technical information is taken from sales brochures, the operating instructions or other information provided by the manufacturer. We accept no liability for incomplete or incorrect data and informations.

Year of construction: 2013, condition: used, Technical data of the bale opener line for RDF. MSW, paper, cardboard: Manufacturer Cross Wrap Oy Ltd, Siilinjärvi, Finland Type BO 4000 Year of manufacture 2015 Quantity of opened bales 674 pieces Operating time only 3 days, exclusively by running in the entire line during new installation Opening time approx. 45 seconds per bale Bale dimensions (W x H x L) 1100 x 1100 x 1400 - 1900 mm Max. Bale weight 2,000 kg Conveying height of the system 1,400 mm Max. Conveying width of the system 1,200 mm Material to be opened RDF/MSW Availability of the line 98% Noise level of the bale opener line 85 dB(A) Total connected load 37 kW Rated current 125 A Operating display SIEMENS SIMATIC HMI Touch Control SIEMENS S7 ET200S Installation dimensions 8,463 x 2,890 x 3,960 mm (l x w x h) Scope of delivery: Feed conveyor 3,500 x 1,200 x 1,400 mm Iedpfx Afou Tg I Djnean Feed conveyor to opener 1,500 x 1,200 x 1,400 mm Bale opener (gripper with knife) Special equipment: Oil heating in hydraulic oil tank Heating in control cabinet Oil cooler in Hydraulic unit Explanation of the short period of use: The entire line of Cross Wrap bale openers type BO 4000 was installed at a municipal waste incineration plant in 2015. The background to the installation was that in the case of a malfunction or maintenance of the incinerator, the municipal waste could continue to be received, baled, wrapped and stored until the malfunction was cleared. Then the bales should all be opened again and the waste fed into the normal incineration process. This worst-case scenario never came to pass. The plant was set up, run in and then never used in regular operation. Only during the commissioning and running-in of the entire plant in 2015 were 674 bales opened on three days. The plant is in very good condition and ready for operation immediately. Due to reconstruction measures in the incineration plant, the installation area of the bale opener was needed. As a result, the entire line is for sale. Short description of the wrapping process: The pressed bales are placed on the infeed conveyor belt from the side or from behind by means of a forklift truck. For opening, the bales must run horizontally to the conveyor belt with the wire or twine binding, otherwise the bales must be turned 90° beforehand. The opening conveyor brings one bale at a time in front of the cutting unit. The grippers hold the wires or twine strapping. The front and rear rotating knives slit the bale lengthwise. Afterwards, the gripper returns to the starting position. The opened bale is now conveyed via the conveyor belt to the discharge chute and then falls onto the following conveyor system. Comments: New price of the completely plant 296.000,- €. The documentation (operating instructions, CE declaration, electrical/hydraulic circuit diagram) is complete. The unit has been dismantled into freight-manageable units, stored and is available for inspection and loading at short notice. We do not accept any liability for the technical details or any errors.

Condition: good (used), Watson Marlow 120U/DV peristaltic pump *New price 9100 The 100 series pumps are the ideal choice to maximize yield in fermentation and cell culture applications. These pumps offer not only high performance and reliability, but also ease of use for single-use systems. A flawless tube change takes only a few seconds, further increasing the efficiency of your processes. Biopharmaceutical processes require precise and repeatable pump performance that is easy to validate. Our 100 series, with its exceptional speed range of 2,000:1, offers the flexibility and purity essential for drug testing. The keypad lock secures your pump parameters to ensure consistent and repeatable performance. Technical data: Protection class housing IP 31 Maximum pressure 30 psi Model 120 U/DV Flow rate 0.001 to 170 ml/min at 30 psi Motor speed 0.1 to 200 rpm Temperature 5 °C to 40 °C Pump weight approx. 2 kg Torque 0.4 Nm continuous operation Noise level < 60 dB(A) at 1 m distance Standard CE, cETLus Power supply Supplied with 24 VDC mains transformer plug Condition: used Iedjttzgdopfx Afnjan Financing through our bank is also possible. komplett-konzept.leasingo.de You can find more laboratory devices - new and used - in our store! International shipping costs on request!

Condition: used, mileage: 32 km, power: 171 kW (232.50 HP), fuel type: hybrid, gearing type: automatic, overall weight: 3,300 kg, first registration: 01/2026, color: grey, number of seats: 8, total length: 5,450 mm, total width: 2,275 mm, total height: 2,004 mm, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), navigation system, soot filter, Internal number: 41955 Errors and prior sale excepted! ---- SPECIAL EQUIPMENT * Tow bar, electrically retractable * Exclusive package: panoramic roof – Rear seat Package 21 (6 rear seats, sliding doors right and left, 2nd row of seats with 3 individual seats, outer seats heated, middle seat with storage table on the backrest, 3rd row with individual seats) – 15 B&O speakers – ambient lighting * Heated steering wheel * Adaptive matrix LED headlights, LED low beams including all-weather light, glare-free LED high beams, LED daytime running lights with integrated front LED indicators, static LED cornering lights, speed-dependent headlight range control, LED tail lights * Wheels: 7.5J x 19" alloy wheels in Active design, finished in Absolute Black * Technology Package 6: Electrically adjustable, heated and folding exterior mirrors – Audio system with 13-inch multifunction display, Ford SYNC 4 including navigation – Blind spot assist including cross-traffic alert and rear emergency braking assistant – Pre-collision assist, camera- and radar-based – Driver drowsiness detection – Lane keeping, lane departure warning, lane change and lane centering assist – Road sign recognition – Wrong-way warning function – Front/rear Park Pilot system – Adaptive cruise control with Stop&Go function – Intelligent speed limiter with speed limit display – 360-degree camera – Sensico leather-look steering wheel FURTHER EQUIPMENT * 2 grab handles on driver and passenger side * 3 USB ports for the 2nd row of seats * ABS * Passenger airbag with deactivation function * Driver airbag * Battery: H7 AGM single battery * Roof rails, silver * Thatcham theft alarm system with interior monitoring in the driver's cab, including central locking with double locking * Electrically operated front windows with quick up/down function * Electronic parking brake * Ford Key Free System including Ford Power Start function * FordPass Connect – Wi-Fi hotspot, 5G modem (up to 5G/LTE, for up to 10 mobile devices) * Heated windscreen * Glove compartment with lockable lid * Interior lighting for passenger compartment * 3-zone automatic climate control – individually adjustable automatic temperature control for driver, front passenger and rear zones – auxiliary heater – R-1234yf refrigerant – electric additional heater – electronic temperature control in the rear * Charging cable, single-phase, length: 5 m * Inductive charging station for mobile devices in center console (Qi standard) * Large center console * Emergency call assistant, eCall emergency system * Picnic lighting * Tire repair kit * Tire pressure monitoring system * Windscreen wipers with rain sensor * Sliding door with soft-close function * Sliding doors right and left, including sunshades in the 2nd row * Rail-based flexible seating system * Fixed side windows for second and third row * Seat Package 29: Front passenger seat, individual, 4-way manual adjustment – Driver's seat, 5-way electrically adjustable – Seat heating for driver & passenger – Inner & outer armrest – Electric lumbar support for driver – Lumbar support for front passenger – Passenger side airbag, right & left side airbags, front, right & left head/shoulder airbags – Partial synthetic leather upholstery (Active) with fabric, trim in artificial leather/velour * 12V socket in passenger compartment * Carpet throughout the vehicle Ijdjx Nt Dnspfx Afnjan * Front USB port * 4 lashing eyes * Immobilizer * Heat-insulating glazing, medium tint * Central locking with remote control – incl

Condition: used, mileage: 32 km, power: 171 kW (232.50 HP), fuel type: hybrid, gearing type: automatic, overall weight: 3,300 kg, first registration: 01/2026, color: blue, number of seats: 8, total length: 5,450 mm, total width: 2,275 mm, total height: 1,979 mm, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), navigation system, soot filter, Internal number: 41743 Errors and prior sale reserved! ---- SPECIAL EQUIPMENT * Electrically swiveling towbar * Exclusive Package: Panoramic roof - Rear Seat Package 21 (6 rear seats, sliding doors on both right and left, second row with 3 individual seats, outer seats heated, center seat with an integrated folding table in the backrest, third row with individual seats) - 15 B&O speakers - Ambient lighting * Heated steering wheel * Wheels: All-season tires (winter suitable) * Electrically operated sliding doors left and right with hands-free function and integrated sunblinds in the second row - Ford Key Free system including Ford Power Start function * Technology Package 6: Exterior mirrors electrically adjustable, heated, and foldable - Audio system with 13-inch multifunction display, Ford SYNC 4 with navigation - Blind Spot Assist incl. CTA rear emergency braking assist - Pre-Collision Assist, camera and radar-based - Driver drowsiness alert - Lane keeping, lane departure, and lane change assistants, lane centering - Traffic sign recognition - Wrong-way warning function - Front and rear parking pilot system - Adaptive cruise control with Stop & Go function - Intelligent speed limiter with speed limit display - 360-degree camera - Steering wheel in Sensico leather look ADDITIONAL EQUIPMENT * 2 grab handles for driver and passenger side * 3 USB ports for the second row * ABS * Front storage compartment * Passenger-side airbag with deactivation function * Driver-side airbag * Battery: H7 AGM single battery * Roof console * Thatcham-certified theft alarm system with interior monitoring in the driver's cab including central locking with double locking * Electric front windows with quick up/down function * Electronic parking brake * FordPass Connect - WiFi hotspot 5G modem (up to 5G/LTE, for up to 10 mobile devices) * Heated windscreen * GT stripes on the bonnet, front lower bumper, and rear door, including side decorative stripes * Lockable glove compartment with lid * Rear spoiler * Interior lighting in the passenger compartment * 3-zone automatic climate control with separate automatic temperature control for driver, front passenger, and rear compartment, auxiliary heater, R-1234yf refrigerant, electric auxiliary heater, and electric temperature regulation in the rear compartment * LED rear lights * LED headlights: LED high beam, LED low beam, LED daytime running lights with integrated LED front indicators, static cornering lights, high beam assistant * 1-phase charging cable, length: 5m * Wireless charging bay in the center console for mobile devices (Qi standard) * Large center console * Emergency call assistant (eCall emergency system) * Picnic lighting * Tire repair kit * Tire pressure monitoring system * Wheels: 6.5J x 17 alloy wheels with 215/60 R17C 109/107T tires in matte black sport design * Rain sensor wipers * Sliding door with soft-close assist * Flexible rail-based seating system Iasdex Nt Dbepfx Afnsn * Fixed side windows, second and third rows * Seat Package 19: 5-way electrically adjustable driver’s seat - passenger single seat 4-way manually adjustable - heated seats for driver and passenger - inner and outer armrests - electric lumbar support for driver, lumbar support for passenger - passenger side airbag, side airbags right and left, head/shoulder airbags front right and left - part synthetic leather sport upholstery * 12-volt power outlet in the passenger compartment * Carpet flooring throughout the vehicle * Front USB port * 4 lashing

Condition: new, functionality: fully functional, power: 18.4 kW (25.02 HP), fuel type: diesel, color: orange, operation weight: 2,500 kg, maximum load weight: 1,000 kg, tire condition: 100 %, shovel volume: 0.5 m³, Year of construction: 2025, Equipment: 4 in one shovel, The YX280 telescopic loader / compact wheel loader is a powerful and versatile machine for construction companies, landscaping professionals, agriculture, and municipal applications. Its robust design, modern technology, and extensive standard features make it ideal for daily, demanding use. With an operating weight of 2.5 t, a payload of 1,000 kg, and a EURO V diesel engine, the YX280 impresses with efficiency, reliability, and cost-effectiveness. Your benefits at a glance ✔ EURO V Changchai diesel engine – economical & low emissions ✔ 1,000 kg payload with compact design ✔ Precise hydraulic system for efficient operation ✔ Comprehensive standard equipment including 4-in-1 bucket & pallet fork ✔ Brand new & unused, current production ✔ Immediately available / short delivery times ⚙️ Technical Data Operating weight: 2,500 kg Max. payload: 1,000 kg Dimensions (L × W × H): 4,600 × 1,600 × 2,500 mm Bucket capacity (nominal): 0.5 m³ Engine: Changchai Diesel, EURO V Lifting & Performance Data Telescopic boom lift height: 3,600 mm Main boom lift height: 3,000 mm Dump height, telescopic boom: 2,650 mm Dump height, main boom: 2,100 mm Max. travel speed: 25 km/h Equipment Bucket position indicator Cab heater Reversing camera Drive & Powertrain Torque converter Manual transmission Drive shaft Heavy-duty drive axle ➡️ Optimum power transmission, high breakout force and reliable operation – even on challenging terrain. Operation & Hydraulics Responsive, precise control Stable lifting mechanism for fast loading cycles Accurate bucket positioning with bucket indicator Comfort & Safety Reversing camera for optimal visibility Cab heater Ergonomic controls Robust operator environment for safe operation Attachments & Accessories – SET INCLUDED ✔ Quick hitch ✔ Standard bucket ✔ 4-in-1 multipurpose bucket ✔ Pallet fork ➡️ Quick change between loading, grading, and material handling tasks. Condition & Delivery New, unused, factory tested CE compliant, meets all EU safety standards Available from second half of January Europe-wide shipping available via freight carrier Multiple machines available on request SET PRICE NET: €19,900 RRP Location: Rheda-Wiedenbrück Viewing by appointment possible Iajdpfx Aeyizavsfnon Save now – better price available! Take advantage of our attractive offers. Enquiries are worthwhile!

Condition: new, mileage: 1 km, power: 350 kW (475.87 HP), tire size: 315/80 R 22.5, axle configuration: 6x4, wheelbase: 3,600 mm, fuel tank capacity: 940 l, driver cabin: sleeper cab, gearing type: automatic, number of gears: 12, emission class: euro3, suspension: steel, Year of construction: 2025, Equipment: ABS, air conditioning, electric window regulation, second fuel tank, = Additional Options and Equipment = - Aluminium fuel tank - Leaf suspension - Radio/CD player - Sleeper cab - Sun visor = Notes = The Mercedes-Benz Actros 3348S 6x4 is a robust and versatile truck, ideally suited for heavy-duty transport tasks. With a 480 HP engine and 6x4 drive configuration, this truck is designed for operation under the most demanding conditions. The Actros 3348S offers unmatched stability, performance, and comfort, making it the ideal choice for heavy construction and industrial applications. Technical specifications of the Mercedes-Benz Actros 3348S 6x4 - Model: Mercedes-Benz Actros 3348S 6x4 - Engine: Inline six-cylinder, 12.8 l, 350 kW (476 HP), 2300 Nm - Transmission: Mercedes PowerShift 3 - Maximum speed: 89 km/h (depending on configuration) - Tank: 480 l, left, 735 x 700 x 1100 mm, aluminium - Tank: Second tank, 480 l, right, 735 x 700 x 1100 mm, aluminium - Chassis: Extended wheelbase for heavy-duty bodies - Trailer load: Up to 120,000 kg (depending on body and load) Driving Behaviour and Chassis - Axle system: Front axle, straight version 7.5T - Axle system: Rear axle, crown wheel 300, planetary drive, 13.4T - Braking system: Disc brakes on front and rear axles - ABS (anti-lock braking system) for enhanced grip and safety Applications The Mercedes-Benz Actros 3348S 6x4 is suitable for applications where high performance and versatility are required. - Mining: Transport of raw materials, sand, or heavy construction materials - Container transport: Perfect for long-distance container haulage - Semi-trailer: Transport of heavy loads, steel, machinery, or other goods - Transport: Hauling of machinery and construction materials - Specific cargo transport: Thanks to the adaptability of the Actros 3348S, various body configurations such as tipper, tanker, or container body can be supplied according to specific transport requirements. Dimensions: L. 7,450 mm W. 2,500 mm H. 3,671 mm Weight: 9,905 kg The Mercedes-Benz Actros 3348S 6x4 combines performance, reliability, advanced technology, and low operating costs, making it the ideal choice for tough and demanding transport and construction operations. It is an investment that pays off in the long term in terms of sustainability and efficiency. Mercedes-Benz has stood out for years in comparison to other brands in the industry due to these qualities. Tractor units only available with trailer = Additional Information = Year of manufacture: 2025 Tyre size: 315/80 R 22.5 Brakes: Disc brakes Ijdpfx Aoyf Dprsfnean Suspension: Leaf suspension Front axle: Steered Number of cylinders: 6 Engine displacement: 12,800 cc

Condition: new, mileage: 1 km, power: 350 kW (475.87 HP), tire size: 315/80 R 22.5, axle configuration: 6x4, wheelbase: 3,600 mm, fuel tank capacity: 940 l, driver cabin: sleeper cab, gearing type: automatic, number of gears: 12, emission class: euro3, suspension: steel, Year of construction: 2025, Equipment: ABS, air conditioning, electric window regulation, second fuel tank, = Additional Options and Equipment = - Aluminium fuel tank - Leaf suspension Ijdpfeyf Dpljx Afnjan - Radio/CD player - Sleeper cab - Sun visor = Notes = The Mercedes-Benz Actros 3348S 6x4 is a robust and versatile truck, ideally suited for heavy-duty transport tasks. With a 480 HP engine and 6x4 drive configuration, this truck is designed for operation under the most demanding conditions. The Actros 3348S offers unmatched stability, performance, and comfort, making it the ideal choice for heavy construction and industrial applications. Technical specifications of the Mercedes-Benz Actros 3348S 6x4 - Model: Mercedes-Benz Actros 3348S 6x4 - Engine: Inline six-cylinder, 12.8 l, 350 kW (476 HP), 2300 Nm - Transmission: Mercedes PowerShift 3 - Maximum speed: 89 km/h (depending on configuration) - Tank: 480 l, left, 735 x 700 x 1100 mm, aluminium - Tank: Second tank, 480 l, right, 735 x 700 x 1100 mm, aluminium - Chassis: Extended wheelbase for heavy-duty bodies - Trailer load: Up to 120,000 kg (depending on body and load) Driving Behaviour and Chassis - Axle system: Front axle, straight version 7.5T - Axle system: Rear axle, crown wheel 300, planetary drive, 13.4T - Braking system: Disc brakes on front and rear axles - ABS (anti-lock braking system) for enhanced grip and safety Applications The Mercedes-Benz Actros 3348S 6x4 is suitable for applications where high performance and versatility are required. - Mining: Transport of raw materials, sand, or heavy construction materials - Container transport: Perfect for long-distance container haulage - Semi-trailer: Transport of heavy loads, steel, machinery, or other goods - Transport: Hauling of machinery and construction materials - Specific cargo transport: Thanks to the adaptability of the Actros 3348S, various body configurations such as tipper, tanker, or container body can be supplied according to specific transport requirements. Dimensions: L. 7,450 mm W. 2,500 mm H. 3,671 mm Weight: 9,905 kg The Mercedes-Benz Actros 3348S 6x4 combines performance, reliability, advanced technology, and low operating costs, making it the ideal choice for tough and demanding transport and construction operations. It is an investment that pays off in the long term in terms of sustainability and efficiency. Mercedes-Benz has stood out for years in comparison to other brands in the industry due to these qualities. Tractor units only available with trailer = Additional Information = Year of manufacture: 2025 Tyre size: 315/80 R 22.5 Brakes: Disc brakes Suspension: Leaf suspension Front axle: Steered Number of cylinders: 6 Engine displacement: 12,800 cc

Condition: new, mileage: 1 km, power: 350 kW (475.87 HP), tire size: 315/80 R 22.5, axle configuration: 6x4, wheelbase: 3,600 mm, fuel tank capacity: 940 l, driver cabin: sleeper cab, gearing type: automatic, number of gears: 12, emission class: euro3, suspension: steel, Year of construction: 2025, Equipment: ABS, air conditioning, electric window regulation, second fuel tank, = Additional Options and Equipment = - Aluminium fuel tank - Leaf suspension Iedpfx Ajyf Dpfsfnsan - Radio/CD player - Sleeper cab - Sun visor = Notes = The Mercedes-Benz Actros 3348S 6x4 is a robust and versatile truck, ideally suited for heavy-duty transport tasks. With a 480 HP engine and 6x4 drive configuration, this truck is designed for operation under the most demanding conditions. The Actros 3348S offers unmatched stability, performance, and comfort, making it the ideal choice for heavy construction and industrial applications. Technical specifications of the Mercedes-Benz Actros 3348S 6x4 - Model: Mercedes-Benz Actros 3348S 6x4 - Engine: Inline six-cylinder, 12.8 l, 350 kW (476 HP), 2300 Nm - Transmission: Mercedes PowerShift 3 - Maximum speed: 89 km/h (depending on configuration) - Tank: 480 l, left, 735 x 700 x 1100 mm, aluminium - Tank: Second tank, 480 l, right, 735 x 700 x 1100 mm, aluminium - Chassis: Extended wheelbase for heavy-duty bodies - Trailer load: Up to 120,000 kg (depending on body and load) Driving Behaviour and Chassis - Axle system: Front axle, straight version 7.5T - Axle system: Rear axle, crown wheel 300, planetary drive, 13.4T - Braking system: Disc brakes on front and rear axles - ABS (anti-lock braking system) for enhanced grip and safety Applications The Mercedes-Benz Actros 3348S 6x4 is suitable for applications where high performance and versatility are required. - Mining: Transport of raw materials, sand, or heavy construction materials - Container transport: Perfect for long-distance container haulage - Semi-trailer: Transport of heavy loads, steel, machinery, or other goods - Transport: Hauling of machinery and construction materials - Specific cargo transport: Thanks to the adaptability of the Actros 3348S, various body configurations such as tipper, tanker, or container body can be supplied according to specific transport requirements. Dimensions: L. 7,450 mm W. 2,500 mm H. 3,671 mm Weight: 9,905 kg The Mercedes-Benz Actros 3348S 6x4 combines performance, reliability, advanced technology, and low operating costs, making it the ideal choice for tough and demanding transport and construction operations. It is an investment that pays off in the long term in terms of sustainability and efficiency. Mercedes-Benz has stood out for years in comparison to other brands in the industry due to these qualities. Tractor units only available with trailer = Additional Information = Year of manufacture: 2025 Tyre size: 315/80 R 22.5 Brakes: Disc brakes Suspension: Leaf suspension Front axle: Steered Number of cylinders: 6 Engine displacement: 12,800 cc

Condition: new, mileage: 1 km, power: 350 kW (475.87 HP), tire size: 315/80 R 22.5, axle configuration: 6x4, wheelbase: 3,600 mm, fuel tank capacity: 940 l, driver cabin: sleeper cab, gearing type: automatic, number of gears: 12, emission class: euro3, suspension: steel, Year of construction: 2025, Equipment: ABS, air conditioning, electric window regulation, second fuel tank, = Additional Options and Equipment = - Aluminium fuel tank - Leaf suspension - Radio/CD player - Sleeper cab - Sun visor = Notes = The Mercedes-Benz Actros 3348S 6x4 is a robust and versatile truck, ideally suited for heavy-duty transport tasks. With a 480 HP engine and 6x4 drive configuration, this truck is designed for operation under the most demanding conditions. The Actros 3348S offers unmatched stability, performance, and comfort, making it the ideal choice for heavy construction and industrial applications. Technical specifications of the Mercedes-Benz Actros 3348S 6x4 - Model: Mercedes-Benz Actros 3348S 6x4 - Engine: Inline six-cylinder, 12.8 l, 350 kW (476 HP), 2300 Nm - Transmission: Mercedes PowerShift 3 - Maximum speed: 89 km/h (depending on configuration) - Tank: 480 l, left, 735 x 700 x 1100 mm, aluminium - Tank: Second tank, 480 l, right, 735 x 700 x 1100 mm, aluminium Iedpfjyf Dnzjx Afnoan - Chassis: Extended wheelbase for heavy-duty bodies - Trailer load: Up to 120,000 kg (depending on body and load) Driving Behaviour and Chassis - Axle system: Front axle, straight version 7.5T - Axle system: Rear axle, crown wheel 300, planetary drive, 13.4T - Braking system: Disc brakes on front and rear axles - ABS (anti-lock braking system) for enhanced grip and safety Applications The Mercedes-Benz Actros 3348S 6x4 is suitable for applications where high performance and versatility are required. - Mining: Transport of raw materials, sand, or heavy construction materials - Container transport: Perfect for long-distance container haulage - Semi-trailer: Transport of heavy loads, steel, machinery, or other goods - Transport: Hauling of machinery and construction materials - Specific cargo transport: Thanks to the adaptability of the Actros 3348S, various body configurations such as tipper, tanker, or container body can be supplied according to specific transport requirements. Dimensions: L. 7,450 mm W. 2,500 mm H. 3,671 mm Weight: 9,905 kg The Mercedes-Benz Actros 3348S 6x4 combines performance, reliability, advanced technology, and low operating costs, making it the ideal choice for tough and demanding transport and construction operations. It is an investment that pays off in the long term in terms of sustainability and efficiency. Mercedes-Benz has stood out for years in comparison to other brands in the industry due to these qualities. Tractor units only available with trailer = Additional Information = Year of manufacture: 2025 Tyre size: 315/80 R 22.5 Brakes: Disc brakes Suspension: Leaf suspension Front axle: Steered Number of cylinders: 6 Engine displacement: 12,800 cc

Condition: used, Year of construction: 1983, Overview  This bottle washing machine was manufactured in 1983 by Italian company Silmo (model Praktika). The machine was part of a filling line with an overall output of 2,500 bph and is available immediately. Technical data  Capacity: 1,000–2,800 bph at 30-second cycle 1,900–5,600 bph at 15-second cycle (Was operated in a line running 2,500 bph) Formats: Prepared for 0.33 L Longneck Bottle rows: 12 bottles per row Special features: Label removal   Iasdpfxsyb Sxto Afnsn

Condition: used, Year of construction: 1998, Overview  This bottle washer was manufactured in 1998 by the German company PAC. The CB 14-0,5L-R-7 LII Compact model is a fully automatic returnable glass bottle washer designed for medium-capacity beverage filling lines. With a throughput of 7,500 bottles per hour, it ensures effective cleaning through a multi-stage process using caustic and hot-water baths. The unit has 14,175 operating hours and is in good working condition. Technical data Capacity: 7,500 bottles/hour Adjustable speed range: 3,750 – 7,875 bottles/hour Cycle time: 6.72 seconds Total treatment time: 11.65 minutes Bottle formats: Up to Euro-NRW Bottle rows per carrier: 14 Bottles inside machine: 1,456 Bottle carrier trays: 110 Effective spray times: Hot lye 8.96 seconds Lye II 8.96 seconds Hot water II 8.96 seconds Hot water I 8.96 seconds Cold water: 13.44 seconds Fresh water max.: 8.96 seconds Utilities Water consumption: 3.25 – 3.38 m³/h at 60°C Power connection: 12.0 – 12.9 kW Thermal energy consumption: 3,528 × 1000 kJ/h Dimensions Length with cabinet: 7,020 mm Width of frame: 1725 mm Height: 2300 mm Iajdpjxn A S Nsfx Afnon