Used Screw Tap for sale (6,268)

Condition: excellent (used), C-shaped screw clamp, screw clamps, steel construction clamps, clamps, clamping tools -Manufacturer: Holex, malleable cast iron screw clamp 600 x 120 mm -Article No.: Hoffmann 860100 600 -Wingspan: approx. 600 mm -Clamping depth: approx. 120 mm -Number: 2x screw clamp available -Price per piece -Dimensions: 700/190/H40 mm Gjdpfx Amjr R Abhouoit -Weight: 3.1 kg/piece

Condition: good (used), Screw conveyor, screw conveyor, screw conveyor, conveyor technology, pipe screw conveyor -Conveying length: approx. 2260 mm Execution: stable -Drive motor: SEW Eurodrive 1.0/4.0 kW -Speed: 690/28 2730/109 rpm -Case: stainless steel -Conveyor screw: Ø 150 mm -Conveyor screw pitch: 130 mm -Trough width inside: 170 mm -Screw: steel/stainless steel, higher torque -Dimensions: see technical drawing in the photos -Transport dimensions: 2870/760/H500 mm Gsdpfogv Nqxjx Amujit -Weight: 284 kg

Condition: new, Year of construction: 2024, power: 15 kW (20.39 HP), volume flow: 2,000 m³/h, operating pressure: 10 bar, pressure (max.): 10 bar, type of cooling: air, Equipment: documentation/manual, type plate available, New machine, previous model year Gsdpfjy N A I Nsx Amuoit

Condition: like new (used), Year of construction: 2005, operating hours: 301 h, functionality: fully functional, overall weight: 2,800 kg, motor manufacturer: Mercedes, power: 130 kW (176.75 HP), fuel type: diesel, fuel tank capacity: 450 l, volume flow: 14.4 m³/h, operating pressure: 12 bar, pressure (max.): 12 bar, type of cooling: air, Equipment: type plate available, Compressor in like-new condition, was used as an emergency compressor inside the machine room. Equipped with a built-in aftercooler. Giodpsy N A Ebofx Amuot

Year of construction: 2006, condition: good (used), Airpress screw compressor with dryer Bar: 10 Tank: 200 L Gsdoi Eq D Djpfx Amueit Year: 2006

Condition: excellent (used), Year of construction: 2008, Screw Compressor Manufacturer: Kaeser Model: ASD 32 Year of Manufacture: 2008 Giedey Sghfspfx Amuot Load Hours: approx. 29,050 h Idle Hours: approx. 47,458 h Free Air Delivery: 3.2 m³/h Power: 18.5 kW Pressure: 8 bar Air-cooled, can be converted for heat recovery.

Condition: excellent (used), Year of construction: 2008, Screw Compressor Manufacturer: Kaeser Model: ASD 32 Year of manufacture: 2008 Load hours: approx. 32,337 h Idle hours: 47,455 h Volume flow: 3.2 m³/h Gsdpfx Aoy Sggusmuoit Pressure: max. 8 bar Power: 18.5 kW - Panel damage at rear - Air-cooled, but can be converted to heat recovery

Year of construction: 2010, condition: used, Used machine Used Schneider screw compressor type AIRMASTER AM 7-10 with Schneider DK 985 ECO refrigerated compressed air dryer and compressed air tank. Year of manufacture: 2010 Compressor technical data: Volume flow: 930 l/min Final compression pressure: 10 bar Motor power: 7.5 kW Refrigerated dryer technical data: Air volume flow: 985 l/min Gedpoy Rbgyofx Amujit Max. operating pressure: 16 bar Refrigerant: R134a Air connection: 3/4'' internal Power consumption: 0.3 kW Compressed air tank technical data: Tank volume: 270 l Max. operating pressure: 16.5 bar Availability: by arrangement Location: Flörsheim

Condition: like new (used), Year of construction: 2024, operating hours: 359 h, functionality: fully functional, machine/vehicle number: 1384 - 10024378, overall weight: 295 kg, total length: 1,090 mm, total width: 630 mm, total height: 1,100 mm, motor manufacturer: Super Premium Efficiency IE4, IP55, power: 5.5 kW (7.48 HP), fuel type: electric, volume flow: 56.4 m³/h, operating pressure: 7 bar, pressure (min.): 7 bar, pressure (max.): 8 bar, ambient temperature (min.): 3 °C, ambient temperature (max.): 45 °C, noise level: 62 dB, protection type (IP code): IP54, type of cooling: air, Equipment: documentation/manual, refrigerant dryer, type plate available, For sale is a Kaeser Aircenter SM 10 screw compressor in very well-maintained condition with low operating hours. The unit is a compact, ready-to-use compressed air station featuring an integrated refrigeration dryer (ABT15) and an oil separator with pressure gauge, making it ideal for industrial applications and workshops. The system received its initial and scheduled maintenance in December 2025. All documentation and paperwork are available. The compressor is immediately operational and can be inspected under power by arrangement. Gisdpfx Amsyvkamjuot

Condition: new, Order picking trolley, shelf trolley, shelf trolley, trolley, transport trolley, shelf with wheels, shelf with boxes including 36 x visible storage boxes Data: H: approx. 216 cm D: approx. 68 cm L: approx. 1.95 linear meters Load: 150 kg per level Stand in blue Crossbeams in orange Storage boxes in blue Natural chipboard New goods BLT / WR 20/60 100% quality at the best price. Gsdpfx Amey Rkdnsujit Shelf consists of: 02 x stands approx. 200 cm x 60 cm, pre-assembled. 14 x crossbeams approx. 185 cm. 07 x support shelf approx. 184.5 x 59.5 cm. 28 x locking pins. 36 x visible storage boxes size. 5 (500x300x200mm) 02 x swivel castor with brake 02 x swivel castor without brake 04 x base plate for swivel castor Levels: 7 storage levels -- AVAILABLE IN MULTIPLE NUMBERS IMMEDIATELY-- Price: €822.00 net €978.18 gross You will receive an invoice with VAT shown. Transport: Delivery is carried out by our partner shipping company on request, the costs for this depend on the postcode. Our recommendation: Let us know what you need... We are happy to help you realize your projects, from planning to ordering to assembly. Are you interested or have any questions? Just contact us by message or call. You can find our telephone number on our company website. ☎️ You can reach us by phone from Monday to Friday, 8:00 a.m. to 3:00 p.m. Alternatively, you can send us a message with your name and number and we will get back to you as soon as possible.

Condition: used, Year of construction: 1963, nominal force 240 t Gjdpfxoyx Ik Is Amuoit stroke 130 - 380 mm no. of strokes 21 - 31 /min distance between columns 700 / 610 mm distance table/ram, max. stroke up, adjustment up 650 mm table surface area 620 x 620 mm ram surface 550 x 550 mm spindle diameter 180 mm power capacity 12,0 kW weight 10,5 t Dimensions (WxDxH) 1,45 x 1,6 x 3,32 m only permitted for warm forming work

Condition: used, Year of construction: 2010, metric thread diameter (max.): 20 mm, overall weight: 54 kg, feed length Z-axis: 100 mm, torque: 80 Nm, spindle speed (max.): 2,000 rpm, spindle speed (min.): 270 rpm, nominal power: 5.5 kW (7.48 HP), Equipment: documentation/manual, Used SUHNER TAPmaster GEM 20 C from industrial use. The unit was fully functional at the time of decommissioning. Technical Data: Thread cutting capacity: up to M20 / 600 N/mm² Total stroke: 100 mm Thread pitch: 0.4–2.5 mm Spindle speed: 270–2000 rpm at 50 Hz Mounting: ISO 30 / POT 42 Max. torque: 80 Nm Run-out accuracy: max. 0.01 mm Weight: 54 kg Motor voltage: 230/400 V, 50 Hz Motor according to nameplate: LAIPPLE / KEB FMA112L/4A 3~ three-phase motor Power: 5.5 kW at 50 Hz Giedpfey R Eyqsx Amust Speed: 1420–1430 rpm at 50 Hz Protection class: IP55 Duty cycle: S1 Insulation class: F Brake: 36 Nm Production date: 04/2010 Condition: Used, see pictures. Viewing by appointment possible. Scope of delivery as shown. Sale without warranty, guarantee or returns, as permitted by law. Ready for collection in DE-57439 Attendorn Shipping available at extra cost ---- Optional available: Manual height adjustment unit / Z-axis feed slide with handwheel, leadscrew, linear guide, and mounting plate. Used condition, as shown. Price per unit: €100 net

Year of construction: 2008, operating hours: 25,000 h, condition: excellent (used), functionality: fully functional, construction height: 1,865 mm, nominal power: 45 kW (61.18 HP), pressure (max.): 8 bar, rotational speed (max.): 2,965 rpm, machine/vehicle number: 3887, FAD: 8.26 m3/min at 7.5 bar New oil cooler Equipped with heat recovery system KAESER Energy-Saving SIGMA PROFILE Gisdpfey H R N Nsx Amust Direct drive Serviced with original parts by KAESER dealer

Condition: excellent (used), Year of construction: 2012, operating hours: 72,651 h, functionality: fully functional, Screw Compressor Atlas Copco GA37VSDFF Gedpfx Amsy Rva Ijusit Integrated inverter and dryer 37 kW 12.80 bar 7.37 m³/min Year of manufacture: 2012 Operating hours: 72,651

Condition: excellent (used), Year of construction: 2019, operating hours: 53,672 h, functionality: fully functional, Screw compressor Atlas Copco GA110VSD+FF Integrated inverter and dryer 110 kW 12.75 bar 20.70 m3/min Gisdjy Ru Scopfx Amust Year of manufacture: 2019 Operating hours: 53,672

Condition: excellent (used), Year of construction: 2019, operating hours: 10,603 h, functionality: fully functional, Screw compressor Atlas Copco GA45+ Gijdpfx Amey Ru H Touet 45 kW 7.5 bar 8.90 m3/min Year of manufacture: 2019 Operating hours: 10,603

Condition: new, Hydraulic Thread Tapping Machine Manufacturer: CMA Model: RHR 24D Plus Condition: New machine Standard features: - Ball-bearing parallel arm - Hydraulic unit - Digital speed display Gedpfx Asyazfysmuoit - Digital depth adjustment - Clamping table 800 x 600 mm (T-slot: 19 mm) - Quick-change chuck - Micro spray system for tool lubrication - Base frame - Operating manual

Condition: new, Column drilling machine Brand: MAXION Model: UNIMAX 2 S TAP Condition: New machine Spindle speed (stepless): Drilling: Range A 100 - 2,000 rpm Range B 200 - 4,000 rpm Thread cutting: Range A 100 - 500 rpm Godpfxjcu Dwmj Amujit Range B 200 - 1,000 rpm Standard drilling capacity: 20 mm Standard equipment: - Thread cutting device - Digital speed display - Digital drilling depth indicator - Table adjustment via rack and pinion - LED machine lamp - Operating manual

Condition: new, Bench drill Giedpfoci A S Sox Amuot Make: MAXION Model: UNIMAX 1 TAP Condition: New machine spindle speed (infinitely variable): 200 - 4.000 rpm normal drilling capacity: 18 mm standard equipped with: - thread cutting device - digital speed display - digital drilling depth display - table adjustment via toothed rack - instruction manual

Condition: new, Column drilling machine Make: MAXION Model: UNIMAX 3 TAP Giodpfod Hrhvox Amujt Condition new machine Spindle speed (continuous): Area A-80 - 1,440 RPM. Area B 180-3,200 RPM. Standard ALB ear performance: 30 mm equipped as standard with: -infinitely variable speed control -Digital display for speed -Digital display for drilling depth -Thread cutting device -Light machine -automatic tool ejector -Manual

Year of construction: 2004, condition: used, Semi automatic screw capper Gijdpfx Ajiby Hmjmust make: Zalkin Model: TM-3 Build 2004 now equiped for max 90mm cap hand/footpedal operated

Condition: good (used), Code: 0350 Brand: FINI Model: KSC 5 - CE Standard Screw air compressor - CE Standard Motor 5,5 Hp Godpfxjyztrvj Amusit Pressure 10 bar Rotational speed 1450 rpm Air flow 450 lt/min Tank capacity 270 lt Overall dimensions: mm 1350 x 600 x 1200 h - 168 kg

Condition: good (used), Year of construction: 1996, functionality: unexamined, turning diameter over cross slide: 700 mm, turning length: 2,000 mm, turning diameter: 700 mm, spindle bore: 106 mm, spindle speed (max.): 1,800 rpm, For sale: 1 unit used lead- and feed-screw lathe Manufacturer: Weiler Werkzeugmaschinen Model: E70 Year of manufacture: 1996 Technical data: Centre height: approx. 355 mm Swing over bed: approx. 700 mm Giodpfxey R Dyvs Amuet Swing over cross slide: approx. 420–450 mm Distance between centres: 2000 mm Spindle bore: 106 mm Including the illustrated documentation, chip conveyor and Sauter tool holder. The machine can be inspected at our warehouse in 09599 Freiberg.

Condition: used, Acrison dosing screw, dosing unit, feeder Feeder constructed entirely from stainless steel Equipped with mixing mechanism Godpfjy Iciwjx Amusit Screw diameter: 80mm Motor power: 0.75kW See our other listings

Condition: used, Pressing screw REG-MAC for drying films and fibers, and for compacting foam (e.g. polystyrene, EPS) Gedey Icn Tjpfx Amueit Drive motor 55 kw