Used Screw Capper for sale (5,224)

Year of construction: 1994, operating hours: 32,303 h, condition: reconditioned (used), functionality: fully functional, Twin-screw extruder, second-hand Manufacturer: Reifenhäuser Type: BT 1000-2-63 K Year of construction: 1994 Machine no.: 32061 Operating hours: 32,303 hours Screw geometry: conical for PVC-hard profiles Screw diameter: 63 - 121 mm Bwsdsyx Dxuspfx Acvjk Screw length: 1300 mm Screw speed: max. approx. 32 1/min. Nominal torque from gearbox: 1000 daNm Dynamic load rating of the back pressure bearing: 103600 daN Motor power: 43.0 kW, Drive motor: Baumüller DC motor Barrel heating/cooling zones: 4/3 (air cooling with fan) Adapter heating zones: 1 Tool heating zones: 5 Temperature control: digital temperature controller (2 x PSG Multipact 88) Max. permissible melt pressure: 500 bar Output: approx. 150 - 200 kg/h for rigid PVC profiles Accessories: Dosing device and material hopper Extrusion height: 1150 mm Dimensions: 4250 x 1200 x 1750 mm without hopper (LxWxH) Weight: approx. 3000 kg Condition: The machine came directly from production and was cleaned by us, repainted (RAL 7035, light gray) and checked for function.

Year of construction: 1979, operating hours: 216 h, condition: reconditioned (used), functionality: fully functional, Twin-screw extruder, parallel Manufacturer: Hans Weber Maschinenfabrik GmbH Type: DS 85 Year of manufacture: 1979/2022 Machine no.: 85-399 Screw geometry: for PVC-hard profiles Screw diameter: 2 x 85 mm Screw length: 17 x D Screw speed: max. 30 rpm Screw torque: 10000 Nm Motor power: 3.3 - 25.0 kW Drive motor: commutator motor Elektra Faurndau Cylinder heating/cooling zones: 4/2 (air cooling with fan) Bsdpfeyx Dw Dex Acvowk Tool heating zones: 8 Temperature control: 12 x digital temperature controllers (PMA KS40) Accessories: Melt pressure sensor and melt temperature sensor Connected load: approx. 60 kW (without tool) Extrusion height: 1100 mm Output capacity: approx. 150 - 180 kg/h for PVC-hard profiles Accessories: Material hopper and connection flange Accessories: Vacuum pump (1.1 kW) incl. material separator Dimensions: 4500 x 1200 x 2100 mm (LxWxH), incl. material hopper Weight: approx. 4000 kg Note: The electrical control cabinet was completely renewed approx. 3 years ago. Since then, the extruder has only been in operation for 216 hours. Condition: The extruder was repainted (light gray, RAL 7035) and checked for function.

Condition: good (used), functionality: fully functional, Renner RS 1-30 screw compressor, 30 kW Can be seen operating at our premises Bsdpew Dp Rtsfx Acvewk Price includes equipment loaded Transport and installation possible at extra cost.

Condition: used, Year of construction: 2009, functionality: fully functional, total height: 1,850 mm, total width: 2,500 mm, total length: 1,000 mm, input voltage: 400 V, compressed air connection: 4 bar, Emerito 0.8 lid spout / capper for RTS/ TO82 (glass) jars. 1 speed, 24/bpm. - Multiple sizes of parts available for high and low lids. Bwjdpfoub Sk Hox Acvjk - Machine can be seen working. - Machine is made to vacuum seal, we have not used this option. - Machine can also close RTS/ TO66. We do not use this option either, changing between two sizes is a lot of work. Sale: "as is, where is" However, telephone assistance is possible up to 2 months after sale.

Year of construction: 1991, condition: used, machine/vehicle number: 149125/95, max. operating pressure: 8 bar Delivery rate: 2.51 m³/min Drive motor: 380/660 V, 15 kW Space requirement: 820 x 950 x 1200 mm high Weight: 360 kg Bjdpfx Ajby Hpbecvjwk Air vessel, make KAESER, year of construction 1999 Capacity: 1000 l max. operating pressure: 11 bar Space requirement: 800 Ø x 2300 mm high

Year of construction: 1990, condition: used, machine/vehicle number: 226794, Air Output: (8 bar) 2,05 m³/min Pressure: 8 bar Bwjdpfo E E Awsx Acvok Motor: 15 kW

Condition: excellent (used), 5 pieces of hard base with screwed-on aluminum jaws, suitable for a FORKARDT chuck, 250 mm Ø Bwodpfx Acjfxu Tysvok 1 set of inwardly stepped jaws: 190 - 250 mm 1 set of inwardly stepped jaws: 120 - 200 mm 1 set of jaws stepped outwards: 220 mm 1 set of jaws stepped outwards: 100 - 250 mm 1 set of jaws stepped outwards: 120 - 300 mm 1 set of outwardly stepped jaws made of St: 120 - 260 mm 1 set of outwardly stepped jaws made of St: 140 - 240 mm

Year of construction: 2001, condition: excellent (used), functionality: fully functional, machine/vehicle number: 3063, used Leistritz Micro27/GL-32D laboratory twin-screw extruder, machine no. 3063 Year of manufacture: 2001 Motor power: 10.5 kW Screw speed up to 500 rpm Screw diameter: 27 mm Bwedpsyc Sfpofx Acvjk Cylinder material: 1.8550 nitrided Nitriding layer 0.5-0.6 mm Screw material: 1.2379 Volumetric dosing Brabender mounted on the gearbox and included in the scope of delivery. Single temperature control unit included in the scope of delivery. Atmospheric degassing, without blind plug Documentation in German available in paper form. tool with nozzle 1 hole approx. 3 mm Condition: used, functionally tested, as is, without warranty You are welcome to view this (and other) extruders at our warehouse in Königswinter The machine can be switched on and demonstrated when empty. The screw has been removed and cleaned.

Condition: used, Year of construction: 1963, nominal force 240 t stroke 130 - 380 mm no. of strokes 21 - 31 /min distance between columns 700 / 610 mm distance table/ram, max. stroke up, adjustment up 650 mm table surface area 620 x 620 mm Bjdpfxjyx Ik Io Acvowk ram surface 550 x 550 mm spindle diameter 180 mm power capacity 12,0 kW weight 10,5 t Dimensions (WxDxH) 1,45 x 1,6 x 3,32 m only permitted for warm forming work

Condition: used, Van Beek screw conveyor Bwodpfx Aceywgm Eevek Entirely made of stainless steel Featuring cleaning hatches along the entire length Motor power: 2.2 kW Speed adjustable via built-in frequency inverter Screw diameter: 160 mm Length: 3400 mm Conveying height: 2140 mm Equipped with magnetic rod at the inlet

Condition: excellent (used), Year of construction: 2017, operating hours: 37,697 h, functionality: fully functional, Screw Compressor Atlas Copco GA132 132 kW 7.5 bar 25.40 m3/min Year of manufacture: 2017 Bwedpfx Acjyym H Devek Operating hours: 37,697

Year of construction: 2021, condition: used, Technical details: pressure: 5 t distance between columns: - mm dayligth: 60 mm rated capacity: 8 kVA table height adjustment: 60 mm compressed air: 6 bar connection voltage: 400 V electrics - voltage/frequency: 400/50 V/Hz total power requirement: 4 kW Servo-mechanical spindle press DESCRIPTION OF THE MACHINE – 2 machines available MACHINE: Electrically driven press with a pressing force of 50,000 N. The machine is designed for pressing bearings and rubber seals. It consists of a welded L-shaped frame. On the horizontal arm, there is a movable press table that can be manually shifted along linear guides. In the front position, the table can be manually locked using a spring-loaded pin. In the working position (under the press head), the table is automatically locked by a pneumatic cylinder. Only in this position can the press head be lowered using the two-hand control system. The control panel includes two-hand control buttons, an emergency stop switch, a table lowering button, and force selector switches 1 and 2. The force can be adjusted using potentiometers in the control cabinet. Two force levels and the corresponding pressing speed can be set there. The press head moves along the vertical arm of the press. It also runs on linear guides. The head is driven by a lead screw powered by an electric motor with gearbox via pulleys and a timing belt. Bsdpoyya Ibofx Acvjwk The entire machine is mounted on a table made of aluminum profiles. *

Condition: used, In our opinion, the machine is in good used condition and can be inspected under power by appointment. Accessories, tools and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Subject to changes and errors in the technical data and information as well as prior sale! Bodjvyutgspfx Acvowk

Condition: excellent (used), Year of construction: 2008, operating hours: 63,129 h, functionality: fully functional, Screw compressor Atlas Copco ZT75VSDFF Integrated inverter and dryer. 75 kW 8.75 bar Bwedpfx Aeyycczscvjk 13.20 m3/min Year of manufacture: 2008 Operating hours: 63,129

Condition: excellent (used), Year of construction: 2013, operating hours: 18,254 h, functionality: fully functional, Screw Compressor Ingersoll Rand R37IE-A 37 kW 7.5 bar 6.46 m³/min. Bwsdpsw H Nwlsfx Acvjk Year of manufacture: 2013 Operating hours: 18,254

Condition: like new (used), Parts shown by hand not come. Bjdpfjgvl Dnex Acvswk

Condition: excellent (used), Year of construction: 2007, operating hours: 15,476 h, functionality: fully functional, Machine is available at short notice eff. delivery rate 950 l/min (57 m³/h) motor power 7.5 kW Bwjdpfxeyxcvlj Acvok max. operating pressure 10 bar incl. "FEKA" condensate compressed air dryer

Condition: used, Screw vacuum pump - Unused Manufacturer: Alcatel / Adixen Type: A 300 P Motor: 380-460V Status: Used; As good as new Warranty: 12 months Suction power: 320 m³/h connection: ISO-K 63 Bedpocw Idaofx Acvjwk Ultimate pressure: approx. 1.2x10-2 mbar (abs.) Included: Operating instructions

Year of construction: 2008, condition: excellent (used), Screw pump Manufacturer: Busch Bjdsd Rafbspfx Acvowk Type: Cobra DS 600 E Status: very good condition Delivery time: from stock

Year of construction: 2016, condition: like new (used), screw vacuum pump Manufacturer: Busch Type: Cobra NC 0400 B Bedpfxsfbmnas Acvswk Status: As good as new Warranty: 6 months

Condition: like new (used), Year of construction: 2012, Pump Stand Screw Vacuum Pump & Roots Vacuum Pump Bwsdpsv I Ak Nsfx Acvsk Manufacturer: Busch Type: Cobra NC 0630 B + WV 2000 C Status: As New, Refurbished Warranty: 6 Months

Condition: used, Year of construction: 2010, Lot consists of: (1) Compressor Bwjdpjym Tx Sefx Acvok Technical Details: Motor: 5,500V 108A 900kW, weight 4.6 t /// Compressor: 7,500 m³/h, 6 bar. LxWxH 4.5x3.3x2.2 m, weight 12.5 t

Condition: like new (used), Year of construction: 2022, machine/vehicle number: 220287, NS60E Nakashimada double-pressure press from 2022, like new, cutting length 95 mm, wire cutting 7 mm Bwodjwiwqxopfx Acvok

Year of construction: 2019, condition: excellent (used), We are offering this very well-maintained Quanzhou Hunde Mechanical SCC CT-450-12.5 SCC variable-speed screw air compressor, year of manufacture 2019. Product model: CT-450-12.5 Serial number: 190630 Rated pressure: 13.8 bar Safety valve set pressure: 13.8 bar Test pressure: 20.7 bar Volume: 270 L Weight: 144 kg Bwodsykt Rvepfx Acvsk Test date: 2019/06 Year of manufacture: 2019 Design temperature: 10°C to 100°C Medium: Air & Oil Standard: GB150 If you have any questions or require further information, please feel free to send us a message or give us a call.

Condition: ready for operation (used), Lead and feed screw lathe / WEILER CONDOR from educational institution Bsdpfxeyy Sw Ij Acvswk - Three-axis digital readout "NEW" - Original paint - Center height: 165 mm - Swing over bed: 330 mm - Swing over cross slide: 170 mm - Turning length: 800 mm - Spindle bore: 38 mm - Spindle speeds: 24 - 2800 rpm - Automatic longitudinal / cross feeds - Thread cutting / Metric / Imperial etc. - Tailstock Morse Taper 3 - Collet chuck system incl. 17 collets - Electrical chuck guard - Multifix toolpost with holders - Three-jaw chuck - Coolant system - Chip guard at rear - Work light - Bed stop - Documentation - Various accessories Dimensions (LxWxH): 1.9 x 0.8 x 1.6 meters / Weight: 800 kg Errors and omissions excepted.