Screw compressor 35.1 m³/min

Demag CompAir 350WS EK285NK

Condition: good (used), Refrigeration compressor, refrigeration machine, cooling compressor, refrigeration unit, cooling compressor, compressor, motor compressor, cooling machine, cooling unit -Manufacturer: Bitzer, Compressor Motor Compressor -Type: BHS 592 S -Power: 3 kW / 1450 rpm -Volume flow rate: 22.14 m³/h -Max. operating pressure: 24.5 bar Tedpoguzr Hjfx Aa Ijc -Number: 2x cooling units available -Price: per piece -Dimensions: 550/315/H390 mm -Weight: 88 kg

Condition: excellent (used), A-4200-Tebel Cheese Vat Cheese Vat, capacity 10.000 L, Alfa Laval - Tebel , Good condition, 1 piece, closed Type with agitator, double jacket, Insulated. Heating jacket on lower half of cylindrical section • Cylinder length: 1.750 mm • Cylinder diameter: 2.860 mm • Internal lighting • Manhole with sliding door on top position • CIP connection • Outflow: 4" Outflow height: 400 mm Minimum level Tjdpfxeh A Hb Uo Aa Ijc Weight 2.800 kg (L x W x H): 3.350x3.000x3.200 mm

Condition: good (used), Year of construction: 1980, Diesel emergency generator Manufacturer: MWM Mercedes - AEG, Year: 1980, with switchgear cabinet and cooler. Tsdpfxot In Nys Aa Iec Diesel engine: MWM, 8 cylinders, 405 hp Operating hours: 303.7 hours Generator: AEG, Type: SIRI 100 D/4, 330 kVA.

Year of construction: 1994, condition: excellent (used), TECHNICAL DATA: LENGTH OF WORKING ARM: 1600 mm MAX. CUTTING THICKNESS with 130 mm blade: 45 mm MAX. CUTTING THICKNESS with 160 mm blade: 70 mm MOTOR POWER: 0.75 kW – 380 V / 50 Hz NEON LAMP VOLTAGE: 220 V BLOWING DEVICE TO CLEAN THE WORKING AREA: ELECTRONIC, 220 V WORKING TABLE: 1000 x 2000 mm Todpfx Aajr Hmtkj Isc DIMENSIONS: 2400 x 1000 x 1700 mm WEIGHT: 230 kg

Condition: used, Year of construction: 2009, Compressor 2: Air compressor, make CompAir, type: DH75HSR-10W, 75 kW, bloc compressor 2S7, volume rate of flow 11,9 m³/min, 10 bar, suction pressure 1 bar, 3.700 U/min, built 2009 also: Air compressor, make Bellis Morcom, type: WH50 H3N, stroke 165-1 mm, 750 rpm max, 540 kW, 45 barG, built 1999. Tjdsg D Rbqepfx Aa Iec Compressor, make SIAD, Type: WS1/085-M, with MTA Type: RFWL 200/40, with 40 bar, built 2004, for 22.500 € Compressor, make SIAD, Type: WS1/085-M, with MTA Type: RFWL 200/40, with 40 bar, built 2004, for 22.500 €

Condition: used, functionality: fully functional, Layher Allround U-Console with Pin 0.39 m – used This used Layher AR U-console with pin (length 0.39 meter) is specifically designed to create additional working width on your Layher Allround scaffolding system. Ideal for extending work platforms towards facades or for maintenance and renovation tasks that require more space. ✅ Features: Length: 0.39 meter Design: steel (lightweight LW version), robust and durable Original Layher Allround system component Quick and safe installation without special tools needed Used condition: fully functional, with normal signs of use ✅ Benefits: A cost-effective alternative to new parts. Available directly from stock, also in larger quantities. Reliable Layher system material, globally recognized for its quality. 👉 Availability & delivery: Large quantities in stock. Tedpswzxcmsfx Aa Ioc Worldwide delivery possible. Collection is also possible. Separate quotations are made for large orders.

Condition: new, Year of construction: 2026, CORMAK TS250 / 230V Table Saw The CORMAK TS250 / 230V is a professional table saw designed for woodworking shops, craft workshops, and furniture manufacturers looking for a reliable machine for accurate and efficient cutting of wood and wood-based materials. Its compact dimensions, robust construction, and single-phase power supply make it an excellent choice for users with limited workspace who still require high precision and performance. Main advantages of the machine 254 mm saw blade diameter – enables cutting materials up to 80 mm thick at a 90° angle. 2.2 kW (S1) / 3.1 kW (S6) motor – provides stable power even during intensive operation. Blade speed of 4000 rpm – ensures clean and smooth cutting results. Blade angle adjustment from 90° to 45° – allows precise bevel and angled cuts. Efficient sliding table – with up to 1000 mm travel, ideal for formatting larger workpieces. 620 mm cutting width on the right side of the blade – enables processing of wide panels and furniture boards. Compact design and 230V power supply – allows operation in workshops without access to a three-phase electrical system. Design and technology The TS250 / 230V is based on a stable steel frame that provides high rigidity and effective vibration damping, resulting in improved accuracy and operator comfort. The spindle is powered by a 2.2 kW motor (S1), allowing long-term continuous operation, while the increased S6 power rating of 3.1 kW provides additional performance reserves when cutting harder materials. The blade height and angle adjustment system is based on precise guides and trapezoidal screws, ensuring stable settings even during extended operation. The working table height of 890 mm has been ergonomically designed for comfortable operation. The parallel fence and sliding table provide secure and accurate material guidance along the cutting line. Precision and working efficiency The CORMAK TS250 table saw enables precise cross-cutting and rip-cutting operations. The maximum cutting depth of 80 mm at 90° and 56 mm at 45° allows processing of most standard wooden components. The rigid construction and accurate blade guidance at 4000 rpm ensure smooth cutting edges and minimal material waste. Applications The TS250 model is suitable for: Woodworking workshops – for manufacturing furniture, cabinet fronts, frames, and structural components. Service workshops – wherever mobility, compact dimensions, and high precision are required. Craft workshops – for professionals working with various wood species. Individual users – who have access only to single-phase power but require industrial-level cutting quality. Standard equipment Carbide-tipped saw blade 250 × 30 × 2 mm Parallel rip fence Sliding table Blade guard Integrated blade height and angle adjustment system Optional equipment Dust extraction system with 100 mm port Format sliding table for larger workpieces Additional saw blade sets Technical specifications Parameter Specification Maximum blade diameter / bore 254 mm Blade speed 4000 rpm Blade tilt range 90°–45° Maximum cutting depth at 45° 56 mm Maximum cutting depth at 90° 80 mm Todpfevxhhzjx Aa Isc Sliding table travel 1000 mm Cutting width on the right side of the blade 620 mm Table height 890 mm Motor power 2.2 kW (S1) / 3.1 kW (S6) Power supply 230 V Weight 125 kg Machine dimensions 1090 × 1330 × 910 mm

Condition: good (used), Year of construction: 2000, Three-phase motor, electric motor -Power: 250 kW -Speed at 50 Hz: 2985 rpm -Speed at 60 Hz: 3580 rpm -Shaft: Ø 65 mm Tedpfx Aajpmdale Isc -Height of shaft axis: 350 mm -Recess: Ø 680 mm -Flange: Ø 800 mm -Protection class: IP 55 -Design: B3B5 -Dimensions: 1400/800/H1070 mm -Weight: 1500 kg

Condition: used, Year of construction: 1992, - Combination unit with electronic shoe - Paint sanding - Dust brush - Dust cleaning used Brand Bütfering Type AWS-E-1100 Year of manufacture 1992 Mach. no. 2565571 Working width approx. 1100 mm Tedpfx Aovxlqyja Ijc Passage height approx. 160 mm Number of units 1 piece Belt dimensions 1900 mm x 1120 mm Feed speed continuously adjustable 2.5-12.5 m/min. Suction connection D 2 x 200 mm Space required approx. 1700 mm x 2100 mm x 2100 mm Weight approx. 2200 kg Storage location 97447 Gerolzhofen, free loaded, unpacked Handed over in the current condition as viewed, without guarantee or warranty

Condition: used, Year of construction: 1984, Technical details: grinding diameter min/max: 8 / 40 mm number of spindle speeds: 3000 U/min total power requirement: ca. 1,2 kW weight of the machine ca.: 0,24 t dimension machine xH: 0,7 x 0,9 x 1,3 m The grinding spindle is equipped with two hand levers: Working range left = manual grinding device for small shank drills. working range right = swiveling device of conical shank drills cutting angle max 180 Drill swivel arm small: clearance angle 5° - 9°; drill Ø 8 - 15mm manually adjustable; grinding wheel cup wheel Ø 200 x 40mm with holder Ø 32mm Drill swivel arm large: clearance angle 5° - 9°; drill Ø max 400mm; pitch 6x with index grid manual; grinding wheel currently clamped Ø 180 x 31mm with receptacle Ø 32mm Grinding modes: Tedpeu Ng Irefx Aa Ioc Normal grinding, DK grinding, center grinding, spiral countersink, multiple step drill. *