Used Screw Cap for sale (35,245)

Condition: like new (used), Year of construction: 2009, operating hours: 100 h, functionality: unexamined, overall weight: 10,250 kg, total length: 5,000 mm, total width: 2,100 mm, total height: 2,400 mm, power: 530 kW (720.60 HP), fuel type: electric, operating pressure: 3 bar, Equipment: type plate available, Make Ingersoll Rand Model: CH6-C125MX1 Year of manufacturing: 2009 Serial no: V-7667 Working hours (on service meter): Low hours!! Capacity (Kw) 530 Voltage 400 Frequency (Hz) 50 Rpm 2980 Amps (A) 920 Dimensions LxWxH (mm) 5000 x 2100 x 2500 Weight (kg) approx. 10250 Total quantity in stock 1 Capacity (m3) 7.66 Nm3/h Max. pressure (Bar) 2.8 Country of origin Italy Redov A T Uhopfx Aa Eel Comments Almost Unused compressor

Condition: new, Year of construction: 2024, feed pressure 10.0 bar Effective free air delivery 1.000 L/min motor 400 V 0 250 Liter weight of the machine ca. 410 kg. total power requirement 7.5 kW range L-W-H 1915 x 650 x 1640 mm Exhibition machine / not yet in use new BOGE SOLID model series ~ List price : 9.450 euros / special price on request Made in Germany Furnishing: - with container and dryer / can be used immediately - Microprocessor control SOLID base control - Network pressure sensor - Belt driven drive system - low compressed air temperature due to effective aftercooler - lying underneath compressed air tank - including cold compressed air dryer * automatically working with pre- and post-filter ( mounted ) Rodpfx Asxaby Nsa Eel (also available with 7.5 bar)

Year of construction: 2003, condition: ready for operation (used), 7.5 bar 18 kW Redpoxu H Ubjfx Aa Eel weight 500 kg

Year of construction: 2022, condition: used, 1 used screw compressor ALUP Allegro 11 max. 13 bar, with refrigerant dryer ALUP ADQ year of manufacture: 2022, Redpfxjwrxkre Aa Ejl serial number: ITJ597619, read operating hours: 3,076, connection values: 400 V

Year of construction: 1980, condition: reconditioned (used), machine/vehicle number: 2489, stock-No.:2489 Redpfed Sg Hcjx Aa Eel 1 used, functionally tested Single-Screw-Extruder, ready for trial-run: Manufacturer: KUHNE Germany Type: ES 60-24 Screw- Ø 60 mm – 24 LD Main-feed zone can be chilled( cooling unit not included ) Screw speed up to 100 r.p.m. Extruder Motor: 25,5 kW – 63 A – DC 4x Heating zones with air-cooling 3x additional heating zones for down-stream equipment as: die-head, tools, screen-pack-changer, etc. control board Relating down-stream-equipment as screen-pack-changer, pelletizing etc. against additional price, details upon request. More extruders ex stock available, visit us or ask for our most recent Machine-Stock-List. You´re welcome.

Year of construction: 1997, condition: ready for operation (used), functionality: fully functional, controller manufacturer: Siemens, screw diameter: 75 mm, machine/vehicle number: DE27666, TECHNICAL DETAILS Output: 200–450 kg/h Screw diameter: 2 x Ø 75.0 mm L/D: 36D MACHINE DETAILS Control system: Siemens Materials: PE, PP, PS, ABS Redpfx Aex Npbpea Eel Drive: 143 kW (DC) EQUIPMENT Co-rotating twin-screw Degassing Note: Two screw elements are broken. A side feeder connection or S-cylinder can be offered separately.

Year of construction: 2008, condition: good (used), Complete compressor and air station Rsdpfx Aaegw Diaj Ejl Manufacturer: KAESER Models: AS 36 / TC 31 Year : 2008 Working pressure 7,5 bar

Condition: new, Year of construction: 2025, feed pressure 10.0 bar Effective free air delivery 1.450 L/min motor 400 V 0 250 Liter weight of the machine ca. 452 kg. Rodoxabi Depfx Aa Ejl total power requirement 11.0 kW range L-W-H 1915 x 650 x 1640 mm Exhibition machine / not yet in use new BOGE SOLID model series ~ List price : 11.056 euros / special price on request Made in Germany Furnishing: - with container and dryer / can be used immediately - Microprocessor control SOLID base control - Network pressure sensor - Belt driven drive system - low compressed air temperature due to effective aftercooler - lying underneath compressed air tank - including cold compressed air dryer * automatically working with pre- and post-filter ( mounted ) (also available with 7.5 bar)

Condition: good (used), 25 HP, 10 bar, 2570 l/min Rodpfoxliv Aex Aa Eel

Condition: good (used), Year of construction: 1995, 1 used center lathe Make MCM Type TC 300 x 2000 Year of manufacture 1995 Technical specifications: Center height 300 mm Turning diameter 600 mm Center distance 3000 mm Bed width 400 mm Spindle bore 82 mm Spindle nose Spindle speeds (24) 9 - 1600 rpm Motor power 7.5 kW (option: 9.2 kW) Z-axis feed X-axis feed Metric thread Witworth thread Module thread Diametric pitch thread Cross slide LxW 660 x 230 mm Cross slide stroke 340 mm Top slide LxW 350 x 150 mm Top slide stroke 150 mm Rsdpfx Asvzllcsa Esl Tailstock taper MK 5 Equipped with Three- and four-jaw chuck Multifix head with various inserts Chip tray Steady rest Technical specifications. Errors excepted. This machine comes from a company that exclusively processed plastic and is in excellent condition.

Year of construction: 2004, condition: reconditioned (used), Stock-No. 2054 1used, partly overhauled and functionally tested Single-screw extruder AlphaTec A-ES 75.28 Screw –Ø 75 mm- 28 LD main drive 75 kW- AC Screw speed up to 80 r.p.m. - adjustable 1x venting port with vacuum-pump cylinder barrel heating apporx. 30 kW installed 3x addituional temperature controller for down-stream equipment Control board overhauled Rjdpfx Aeiyx Uzja Eol You´re welcome for inspection visit in our stock Wuppertal-Germany More extruders available

Condition: used, Van Beek stainless steel dosing screw / screw conveyor Diameter: 150 mm Motor power: 0.75 kW, 111 rpm Entirely stainless steel Rjdex Nzzhjpfx Aa Ejl See our other listings VMA Wekerom

Condition: new, Year of construction: 2023, feed pressure 10.0 bar Effective free air delivery 700 L/min motor 400 V 0 250 Liter weight of the machine ca. 397 kg. total power requirement 5.5 kW range L-W-H 1915 x 650 x 1640 mm Exhibition machine / not yet in use new BOGE SOLID model series ~ List price: 8.848 euros / special price on request Made in Germany Furnishing: - with container and dryer / can be used immediately - Microprocessor control SOLID base control Rodpexaahxofx Aa Eol - Network pressure sensor - Belt driven drive system - low compressed air temperature due to effective aftercooler - lying underneath compressed air tank - including cold compressed air dryer * automatically working with pre- and post-filter ( mounted ) (also available with 7.5 bar)

Condition: excellent (used), Schneider 4 kw 530 ltr/min only 700 hours Rodov A R Hnjpfx Aa Esl

Year of construction: 2004, condition: reconditioned (used), Stock-No. 2054 1used, partly overhauled and functionally tested Single-screw extruder AlphaTec A-ES 75.28 Rsdpfx Asiyya Aea Ejl Screw –Ø 75 mm- 28 LD main drive 75 kW- AC Screw speed up to 80 r.p.m. - adjustable 1x venting port with vacuum-pump cylinder barrel heating apporx. 30 kW installed 3x additional temperature controller for down-stream equipment Control board overhauled You´re welcome for inspection visit in our stock Wuppertal-Germany More extruders available

Condition: used, Dosing unit, dosing screw, dosing hopper Equipped with movable bottom to prevent bridging Including control cabinet Rsdpfx Aasx Nzvfs Eel Screw diameter approx. 30 mm See our other advertisements VMA Wekerom

Condition: new, Year of construction: 2022, feed pressure 10.0 bar Effective free air delivery 1.950 L/min motor 400 V 0 250 Liter Redpfjw U U Scjx Aa Esl weight of the machine ca. 467 kg. total power requirement 15.0 kW range L-W-H 1915 x 650 x 1640 mm Exhibition machine / not yet in use new BOGE SOLID model series ~ List price : 13.576 euros / special price on request Made in Germany Furnishing: - with container and dryer / can be used immediately - Microprocessor control SOLID base control - Network pressure sensor - Belt driven drive system - low compressed air temperature due to effective aftercooler - lying underneath compressed air tank - including cold compressed air dryer * automatically working with pre- and post-filter ( mounted ) (also available with 7.5 bar)

Year of construction: 2003, condition: refurbished (used), Stock-No. 2086 twin-screw compounding extruder BERSTORFF type ZE 60 A - UT screw size 2 x 64 mm - 32 LDscrew speed up to 625 r.p.m. adjustable Capacity +/- 800 kg/h depending material specifications Drive from 197 kW up to 350 kW possible, optional by appoinment FLENDER gear-box L/D 34 - 40 LD , by appointment , due to your material formula needs 1x venting port new control board optional - equipment against additional price: screen-pack-changer / melt-filtration unit pelletizing Rodjh Eyduepfx Aa Eol material feeding , loss-in-weight blenders pellet classifier screw configuration and more Please inform about your needs to send you a detailled quotation, thank you All ex our stock Wuppertal-Germany available

Condition: used, Stainless steel dosing screw, feed screw conveyor, auger Equipped with additional feed hopper with aluminium lid Screw diameter: 200 mm Motor power: 3 kW, 36 rpm Total length: 1730 mm See our other listings VMA Wekerom Rjdpfx Aox Nzu Usa Eol

Condition: reconditioned (used), Stock - No.: 2553 1 used, partly overhauled and functionally tested Single-Screw Extruder, equipped with: Material hopper loader Extruder BATTENFELD Typ UNI-EX 1-75-25 B Screw - Ø 75 mm – 25 L/D, Cylinder Air-cooled Extruder-Motor 120 kW – DC ( overhauled ) Screw –speed up to 130 r.p.m. additional Temperature controllers for down-stream equipment Control-Board with melt-pressure sensor / Display. Inspectiuon visist / trial-run shortly by appointment in our workshop Wuppertal Germany possible. We can offer, installed to this extruder: Rjdeiyyndspfx Aa Ejl > screen-pack-changer > pelletizing ( strand, hot-face or waterring ) > other equipment Send us your inquiry. More extruder and complete pelletizing lines ex our workshop Wuppertal, send us your inquiry or visit us, you´re welcome

Condition: reconditioned (used), Stock - No.: 2553 1 used, partly overhauled and functionally tested Single-Screw Extruder, equipped with: Material hopper loader Extruder BATTENFELD Typ UNI-EX 1-75-25 B Screw - Ø 75 mm – 25 L/D, Cylinder Air-cooled Extruder-Motor 120 kW – DC ( overhauled ) Screw –speed up to 130 r.p.m. additional Temperature controllers for down-stream equipment Control-Board with melt-pressure sensor / Display. Inspectiuon visist / trial-run shortly by appointment in our workshop Wuppertal Germany possible. We can offer, installed to this extruder: > screen-pack-changer > pelletizing ( strand, hot-face or waterring ) > other equipment Send us your inquiry. More extruder and complete pelletizing lines ex our workshop Wuppertal, send us your inquiry or visit us, you´re welcome Rodpsiyynwsfx Aa Eol

Year of construction: 2017, condition: used, screw size 30 mm Rodsb Niqhspfx Aa Esl Capacity 1000 kg/h Drive 240 kW L/D

Year of construction: 2003, condition: refurbished (used), Stock-No. 2086 twin-screw compounding extruder BERSTORFF type ZE 60 A - UT screw size 2 x 64 mm - 32 LD Capacity 800 kg/h depening material specifications Drive from 197 kW up to 350 kW possible , optional by appoinment L/D 34 - 40 LD , by appointment > due to your material formula needs drive up to 230 kW - 350 kw optional against add.price 1x venting port Rjdpoc Rukwsfx Aa Esl new control board optional - equipment against additional price: screen-pack-changer pelletizing material feeding , loss-in-weight gravimetrci blenders pellet-classifier and more Please inform which equipment you need for a detailled quotation, thank you. All ex stock available

Year of construction: 2025, condition: new, functionality: fully functional, machine/vehicle number: 2846, Stock No. 2846 Compounding Extruder Type Alphatec AD-.S 75 with: Segmented screws, co-rotating, intermeshing screw design Cylinder water/medium cooled/temperature-controlled Throughput up to 1200 kg/h - material-dependent Drive 250 kW - AC 48 L/D Rsdpsi Dtbuefx Aa Eel R+W safety gear coupling 3x degassing zones, 1x vacuum pump with condensate separator 2x side feeders type ZS-B Siemens Touch HMI control OPTIONAL: > Melt filter/screen changer > pelletizing systems: ST strand, WRG water ring, or UWG underwater pelletizing > Screw configuration according to your requirements > Material dosing/blending : volumetric or gravimetric > Additional accessories Visit us at our Wuppertal plant. The system is ready for demonstration, test run date with your material after arrangement

Condition: new, Year of construction: 2025, operating hours: 2,846 h, functionality: fully functional, machine/vehicle number: 2846, We offer, successfully since more than 12 years, installed in all over EU, our new compounding extruders/lines : e.g. Type Alphatec AD-.S 75 with: Screw diameter 73 mm Segmented, Co-Rotating intermeshing, cylinder water / medium cooled Throughput performance up to 1000 kg/h - depending on the material Drive 132 kW - 250 kW L/D Ratio - according to processing needs Degassing zones - as desired Side feeder type ZS-B - as desired OPTIONAL: > Melt filter/screen changer > Pelletizing systems: strand ST- , water ring WRG or Underwaterpelletizing UWP > Screw configuration according to your needs > Material dosing: volumetric or gravimetric > further accessories Visit us at our Wuppertal plant. Rodpfx Aaji Dtbqe Eol