Used Cap Cooler for sale (2,834)

Condition: excellent (used), TETRA PAK APPLICATOR TCA45 CONVERTED TO HELICAP27 1000 PRISMA Credeuzv E Ropfx Aqvoi YOM 2006 FULL COMPLETE EXCELLENT CONDITION DISMANTLED AND PACKED INTO TETRA BOX VIDEO IN RUNNING CONDITION UNDER REQUEST

Condition: used, Year of construction: 2015, Overview Complete glass bottle line for still soft drinks and juices, built around a Krones Modulfill filler with Variojet rinser from 2015 and rated at 13,000 bottles per hour on 1 l and 22,000 bottles per hour on 0.25 l. The line runs non-returnable glass: depalletizing, rinsing, hot or cold filling, a White Cap twist-off capping machine behind the filler, hot-fill pasteurization, cooling, full bottle inspection, labelling on a Krones Prontomatic and a Langguth labeller, sleeving, tray and carton packing, incrating and palletizing, with buffer table. Two cappers are part of the line. The filler runs hot fill and can also fill cold, which widens the range of products the line can handle. There is no carbonator, so the line fills still (non-carbonated) products only. Technical data - Products: still soft drinks, juices - Filling: hot fill or cold fill, no carbonation - Containers: non-returnable glass bottles 0.25 l - 1 l - Line output: 13,000 bottles/h on 1 l, 22,000 bottles/h on 0.25 l - Years of manufacture: 1987 - 2016 Scope of Delivery Type | Manufacturer | Model | Description | Year - Glass depalletizer | Legendre | 16,000 bottles/h | 1999 - Rinser | Krones | VARIOJET | 13,000 bottles/h on 1 l, 22,000 bottles/h on 0.25 l | 2015 - Filler | Krones | MODULFILL | 13,000 bottles/h on 1 l, 22,000 bottles/h on 0.25 l | 2015 - Twist-off capping machine | White Cap | closure diameters 38 - 53 mm, arranged behind the filler Cedpfj Agpk Aox Aqvjri - Bottle inverter | Polyketting | 12,000 bottles/h | 2004 - Hot-fill pasteurizer | APV | 15,000 l/h | 2005 - Bottle cooler | SEN | 1987 - Full bottle inspector | Heuft | SPECTRUM TX | 22,000 bottles/h - Labeller | Krones | PRONTOMATIC | 15,000 bottles/h | 2006 - Labeller | Langguth | 13,200 bottles/h | 2004 - Sleever | Sleeve Technology | 16,000 bottles/h | 2016 - Buffer table | Krones | 2006 - Tray packer | SMI | 16,000 bottles/h | 1996 - Incrater | Stork | 16,000 bottles/h | 1996 - Carton erector | Kettner | KAF | 12,000 bottles/h | 1999 - Carton closer | Kettner | HDV | 12,000 bottles/h | 1999 - Palletizer | Kettner | PRESSANT UNIVERSAL | 17,000 bottles/h | 1996 Condition Used, still installed. The line produces one last time from 1 to 20 November 2026. Availability Available after shutdown on 20 November 2026. Location: Belgium.

Condition: new, Year of construction: 2021, New 4 Head Automatic Capper & Cap Feeder Never Used / New Model RCP-141 Cedov R I D Hepfx Aqvori To include Capper Feeder & automatic capper machine

Condition: like new (used), Can be modified into a freezer. Cedpfxeycvpls Aqvori Perfect for bread cooling/freezing because of the big tier pitch Full Specs and price on request 610mm wide stainless steel belt with overlay (Omnigrid) fully stainless steel frame New plastics Brand new gearbox Brand new control panel

Condition: good (used), Spiral Cooler with Refrigerated Chiller Room Cjdjn Tmh Sopfx Aqvori In good working condition Chiller Room dimensions 5.4mtr x 4mtr Spiral Cooler 660mm wide wire mesh belt 13 floors high, 170mm high between floors Complete with refrigeration compressor. In use at present

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, overall weight: 2,000 kg, input voltage: 380 V, - Equipped with a cap elevator feeder - Equipped with a Bünder & Schmitt SOR01-1500R cap sorting system Credps Ahrtxjfx Aqvoi - Number of heads: 9 - The line produces 230, 300, 350, 460, 500, and 760 ml plastic bottles. Other sizes can be produced upon request. - Maximum capacity: up to 200 bottles per minute / 12,000 bottles per hour.

Year of construction: 2008, condition: excellent (used), functionality: fully functional, A set of 3 used industrial dry coolers for chiller systems, sourced from an industrial site undergoing modernization/closure. These units are designed for cooling process fluids or dissipating heat for chiller systems. This is reliable, professional-grade equipment, ideal for the food processing industry, plastics manufacturing, commercial HVAC, or data centers. The units are in very good overall condition, clean, and have been regularly maintained. Quantity available: 3 units (available for purchase individually or as a complete set). Type: Dry cooler (for use with glycol-water mixtures). Ventilation: 10 high-efficiency axial fans (electric fans). PS working pressures 179/. Power supply: 3-phase, 400V – 50Hz. Materials: Heat exchanger coil with copper tubes and aluminum fins, robust galvanized steel casing with anti-corrosion protection. Maintenance: Coils have been cleaned; no significant damage to the fins. Ready for connection. Logistics: Equipment is available immediately and can be viewed on-site in Villeneuve la Garenne 92390 France. Collection: Lifting equipment is available on-site to assist with loading. Contact: Cjdpfo Ahrp Usx Aqvjri For further information or to schedule a site visit, please contact me via: machine seeker.

Condition: like new (used), functionality: fully functional, cooling capacity: 895 kW (1,216.86 HP), type of input current: three-phase, type of cooling: air, overall weight: 6,525 kg, input voltage: 400 V, total width: 2,400 mm, total length: 12,960 mm, total height: 2,850 mm, warranty duration: 6 months, Gas cooler & Evap CX heat pump Güntner S-GGDV CD 090.1 DE/2C-E-44 Csdjzqui Espfx Aqvjri Gas cooler capacity: 895.0 kW Evaporator capacity: 465.0 kW Refrigerant temperature: inlet 120.0°C — outlet 37.0°C (gas cooler) Evaporation temperature: -2.0°C (evaporator) Air flow: 216092 m³/h Fans: 24 pcs. EC, 3~400V 50-60Hz Tubes: copper / Fins: epoxy coated Heat exchange surface: 4839.5 m² Max operating pressure: 130.0 bar Dimensions: 12.96 x 2.4 x 2.85 m Weight: approx. 6525 kg Condition: used for testing

Year of construction: 2015, condition: used, Automatic Filling, Capping & Shrink Sleeve Labelling Line – 2015 Manufacturers: SVENSKA PUMP / CLEVER MACHINES / CAPSSON AB Year: 2015 Condition: Used Location: Denmark Complete automatic filling and packaging line, previously used in the dairy and food industry. The line includes: SVENSKA PUMP automatic inline filling machine with 2 filling nozzles, stainless steel construction, and Siemens SIMATIC HMI. CAPSSON AB automatic capping machine, Type 1, S/N 15001, year 2015, with Allen-Bradley control panel. CLEVER MACHINES GS201 automatic shrink sleeve labelling machine, year 2015. Heat shrink tunnel for sleeve labels. Markem-Imaje SmartDate X60 coding printer. Stainless steel conveyors, motors, sensors, and control equipment. Technical details: Crjdpfxe Ahi Iqo Aqvji Electrical supply: 400 V / 50 Hz (Clever Machines) Previous packaging format: 250 g containers Other formats may be possible, subject to modifications. Original technical documentation available. The equipment is offered as a complete line, in its existing condition. Sale condition: Used, as is, where is, without warranty. Delivery: EXW Denmark. Inspection by appointment.

Condition: used, Year of construction: 2019, Air-cooled industrial chiller for cooling process water, equipped with two scroll compressors and an integrated refrigeration circuit. A circulation pump is missing. Manufacturer: REHSLER Kühlsysteme GmbH Model: TAE EVO tech 201 Serial number: 2200 339 696 Csdo Aiaxbspfx Aqvjri Year of manufacture: 2019 Cooling medium: Water Refrigerant: R410A Refrigerant charge: 11.8 kg Number of compressors: 2 scroll compressors Voltage: 400 V Phases: 3 Frequency: 50 Hz Installed electrical power: 26 kW Maximum current draw: 44 A Protection class: IP54 Maximum operating pressure, water circuit: 6 bar Maximum water temperature: 35 °C Maximum refrigerant pressure, low-pressure side: 29.5 bar Maximum refrigerant pressure, high-pressure side: 42 bar Sound pressure level: 71.3 dB(A) Permissible ambient temperature: -20 to +43 °C Weight: 692 kg Cooling: Air-cooled Condenser: Plate heat exchanger with axial fans Number of visible axial fans: 2 Missing component: Circulation pump with 1.1 kW motor, 400 V, DN32 pressure connection

Condition: used, Year of construction: 2008, machine/vehicle number: PEVS010003, Width 1.2 m Height 2 m Crodpfj Ahlthex Aqvei Length 4.6 m

Condition: used, This listing is for an AltemisLab AlteCap Swift 96 Capping and Decapping System The unit is in full working condition and ready for immediate use This capping and decapping system is a high-quality lab instrument manufactured by AltemisLab (Model: AlteCap Swift 96). This automated benchtop system provides reliable, high-speed screw cap handling for 96-format SBS racks, significantly increasing throughput and reducing manual labor in sample management workflows. It has been sourced directly from a working facility, offering premium performance and dependability for standard laboratory applications while ensuring a cost-effective alternative to purchasing brand new equipment. Transparency Report and Technical Audit: Software and Media Disclosure: As a Direct-from-Lab asset, any original software media or accessories found with the unit are included as a courtesy. Licensing Notice: We do not provide, transfer, or guarantee software licenses or keys. The buyer is responsible for all software licensing, registration, and workstation compatibility via the manufacturer. Notice for Procurement: This unit is sold As-Is. While we verify the power-on status and physical integrity, we do not perform analytical validation, fluidic testing, or operational calibration. Ideal for labs with in-house technical expertise or existing service agreements. Sustainability Impact: By choosing Direct Reuse, your facility avoids the carbon footprint of new manufacturing and prevents specialized materials from entering waste streams. Direct-to-Lab reuse is the most carbon-efficient way to equip a modern laboratory. Crsdpfe Advcwsx Aqvei specifications_en: Input Voltage: 24 VDC; Format: 96 SBS rack; Compatibility: Automated screw cap handling for various tube brands.

Condition: used, Year of construction: 2009, AI Overview A 13-meter tube-in-tube heat exchanger paired with a mono (progressive cavity) pump is a heavy-duty industrial setup designed for continuous heating or cooling of high-viscosity, abrasive, or fiber- and particulate-laden fluids (such as wastewater sludge, digestate, food purees, pulps, or industrial effluents). [1, 2, 3] Core System Components & Description Tube-in-Tube (Double-Pipe) Heat Exchanger (13 Meters): Credpfxsz Ru Erj Aqvei Design: Consists of a concentric layout where a smaller inner tube (often corrugated to boost turbulence and heat transfer) is nested inside a larger outer shell tube. Flow Configuration: The process fluid flows counter-currently through the inner tube, while the service/heating/cooling medium flows through the annular space between the inner and outer tubes. Length & Scale: A 13-meter run (frequently modular or multi-pass/series-connected units mounted on a skid frame) provides an extended thermal exchange surface area suited for duty points requiring significant temperature delta (Δ T) without clogging. Handling Solids: Ideal for fluids containing suspended solids, large particles, or fibers up to tens of millimeters that would choke standard plate heat exchangers. [1, 2, 3, 4, 5, 6] Mono Pump (Progressive Cavity Pump): Function: Acts as a positive-displacement feed pump that delivers a steady, controlled, low-shear flow rate of the product medium into the heat exchanger. Why it fits: Progressive cavity ("mono") technology prevents pulsation and handles abrasive, thick, or high-viscosity slurries smoothly without damaging sensitive cell structures or choking under backpressure. [1] Key Applications Wastewater and sewage sludge heating or cooling. Viscous food-industry processing (sauces, pulps, creams, purees). Industrial effluent and dye-house waste heat recovery. Continuous thermal treatment requiring plug-flow characteristics and easy Clean-in-Place (CIP) maintenance Usage: Cooling or Heating of Viscous Products Previously Used on: Yoghurt and Juice Pastes Pump: Mono Pump Meters of Tube in Tube: 13 Condition: Very Good Available: Immediately

Year of construction: 2023, condition: new, functionality: not functional, machine/vehicle number: 75010; 75011, We offer two ElectraTherm AC800 ORC units for generating electricity from waste heat, including two external LU-VE air coolers. The units were manufactured in 2023 and are installed at the premises of EKOLOGIE s.r.o. (ekologiesro.com) in Rynholec, Czech Republic. They are in new, unused condition and have never been put into operation. The equipment is available immediately; dismantling will be handled by the seller. TECHNICAL DESCRIPTION The equipment operates on the principle of an organic Rankine cycle (ORC). The AC800 design is based on the PM75 series and utilizes a modified internal hydraulic circuit that allows for independent cooling of the outlet heat to the desired parameters. EQUIPMENT IDENTIFICATION • Manufacturer: ElectraTherm, by BITZER Group • Commercial designation: AC800 • Model according to the nameplate: ET75B • Manufacturing design: AC800-IP Credpfx Aqe Ag N T Iovsi • Serial numbers: 75010 and 75011 • Year of manufacture of both ORC units: 2023 TECHNICAL DATA ACCORDING TO THE NAMEPLATES • Maximum gross electrical power of the generator: 75 kW per unit • Total maximum gross power of both units: 150 kW • Electrical system: 400 V, three-phase, 50 Hz • Operating range of hot water temperature: 65–115 °C • Maximum hot water flow rate: 83 m³/h per unit • Working fluid: R245fa • Nameplate weight "Tare Weight": 2,979 kg per ORC unit, excluding the external cooler • Maximum nameplate power consumption: 11.2 kW for unit 75010 and 11.5 kW for unit 75011 The stated electrical powers are the maximum gross values of the generators. The actual power depends on the conditions of the heat and cooling sources; the net power of the entire installation also depends on the consumption of auxiliary equipment. SCOPE OF SUPPLY • 2× ElectraTherm AC800 ORC unit • 2× external LU-VE air cooler, each with six fans External pumps, separate external heat exchangers, or connecting pipes are not included in the sale. These parts must be procured separately by the buyer. External pipes and other peripheral technologies shown in the photos are not included in the offer. SALE AND AVAILABILITY • Preference is given to selling both sets together; selling one set can be discussed • Price is negotiable • The seller is a VAT payer; the offered price is stated excluding VAT • Availability: immediately • Dismantling will be handled by the seller • Location: Rynholec, Czech Republic The attached brochures present the AC800 model series and the base ORC module PM75, from which the AC800 design is derived. The PM75 sheet serves as supplementary technical information. The specific parameters of the offered AC800 units are stated in this advertisement and in the photos of their nameplates. The scope of supply corresponds exclusively to the description of the offer.

Condition: good (used), Year of construction: 2011, _Technical specifications:_ • Clamping force: 420 tons (4,200 kN) Crodpfxo Ah Dvkj Aqvei • Injection unit: 3440 • Screw diameter: 80 mm • Screw L/D ratio: 25 • Maximum injection speed: 300 mm/s • Maximum screw speed: 280/240 rpm • Ejector force: 120 kN (boost 180 kN) • Reinforced clamping drive • Dry cycle time:

Year of construction: 2021, operating hours: 8 h, condition: like new (used), functionality: fully functional, Tunnel pasteurizer-cooler Tecninox T.P.N. 4x1.2-3P — as new For sale: professional tunnel pasteurizer-cooler, brand Tecninox (Felino, Parma), model T.P.N. 4x1.2-3P, serial number 317/21, year of manufacture 2021. The machine has only been used once for testing and has never been put into production. It is in excellent condition and comes complete with the original operation and maintenance manual. Key features: - Useful length 4,000 mm, width 1,200 mm - Structure in AISI 304 stainless steel - Polypropylene conveyor belt driven by inverter - 3 Lowara pumps for water circulation - Steam heating with coil and automatic condensate discharge Csdpfoywuzwox Aqveri - Multi-stage cooling with spray water - PIXSYS electronic temperature control - Data recorder with USB output (CSV files) - AISI 304 electrical panel with Danfoss inverter - Power supply 380V/50Hz — Installed power 5.5 kW - Steam consumption 200 kg/h at 3-4 bar - Adjustable cycle time from 55 to 240 minutes If you have any questions or require further information, please do not hesitate to send us a message or call us.

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, Used TRANE RTWD220 water-cooled chillers for indoor applications. Manufactured in 2008, they are in very good condition. Refrigerant type: R134. Two identical chillers are currently available. The Trane Series R Model RTWD 220 is a high-efficiency helical rotary (screw) water-cooled liquid chiller designed for commercial air conditioning and industrial process cooling. Below are the comprehensive technical specifications for the RTWD 220 High Efficiency (HE) variant, which represents the standard European/50Hz metric configurations for this specific model size. Performance Profile (RTWD 220 HE): Cooling Capacity: 781.0 kW (approximately 222 Nominal Tons) Energy Efficiency Ratio (EER): 5.23 European Seasonal Energy Efficiency Ratio (ESEER): 7.03 Sound Power Level: 101 dB(A) Dimensions & Weight: Credpfx Aqs Ahzlnjvei Length: 3490 mm. Width: 1310 mm. Height: 2010 mm. Operating Weight: 4504 kg. Three identical chillers are currently available.

Condition: used, Year of construction: 2015, functionality: fully functional, machine/vehicle number: AA2328995, total height: 2,495 mm, total width: 2,280 mm, total length: 10,500 mm, overall weight: 6,000 kg, Equipment: documentation/manual, For sale is a dry cooler (air-cooled liquid cooler with forced convection) designed for outdoor installation. Air is passed over the finned heat exchanger, which contains the working fluid, for example, a water-glycol mixture. Alfa Laval VDDSE1008.1CD96 C4 ICM Dimensions approximately 10.5m x 2.28m x 2.95m (no heavy-duty transport required for transportation) Weight approximately 6 tons Cooling capacity 866.8 kW Airflow: 217476 m³/h Volume flow rate of cooling medium: 150.8 m³/h A cooling unit is being sold – it has already been dismantled and is ready for loading. Credpfx Aez S U Nasqvei If you are interested or have any further questions, please do not hesitate to contact us.

Condition: used, Automatic filling line for EX-type products, i.e., products filled in a potentially explosive hazard zone 2. Crjdpfx Aszu Rqtoqvei These devices are used for products of the following types: - detergents, - cleaning agents, - solvents, - windshield washer fluids, - various types of liquid chemical raw materials, - plasticizers and other process liquids, - fuels and oils, - other liquid petrochemical products – provided that the materials are compatible and the EX design is appropriate. The filling system consists of several components: - ROBAK volumetric filler, type: ANO-750, with Endress+Hauser DOSIMASS flowmeter fillers, EEx standard – this is a Coriolis flowmeter that can directly measure mass flow, as well as density and temperature, and based on this, volumetric flow. - ROBAK single-head capping machine, type: ZR-02, EX standard, currently in a format for 1 L bottles with a safety cap for hazardous products. - ROBAK cap feeder, type: MPZ-03 - Control cabinet Option for filling bottles or canisters. System capacity: 500 - 2,000 bottles per hour. Complete documentation for the machines. Option to order conveyor belts in EX standard. Used machines, regularly serviced.

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, CFS EcoCut Cap 2 | Emulsifier / In-line micro-cut chopper Manufacturer: CFS Model / Type: ECOCUT CAP 2 Serial number: 5000068187 POS 31 Year of manufacture: 2011 Crsdpfx Aqey Ub E Devji Power supply: 400 V / 3 phases / 50 Hz Rated current: 358.5 A Rated motor power: 204 kW Overall dimensions: 3300 × 2050 × 2850 mm Includes a pallet box with parts. The CFS EcoCut Cap 2 is an advanced, extremely powerful industrial emulsifier (in-line micro-cut chopper) manufactured under the CFS brand. This 2011 model is designed for continuous operation in high-capacity production lines, where it is crucial to obtain a perfectly smooth, stable emulsion and maximize the particle size reduction of the raw material. Equipped with a giant 204 kW motor operating at 358.5 A, this emulsifier easily handles the most demanding tasks, ensuring excellent disruption of protein and fat structures. It is an indispensable piece of equipment in the production of high-quality sausages, frankfurters, pates, mortadella, as well as in the pet food industry and in the production of ready meals and sauces. Key features and advantages: - Unmatched power (204 kW): The large power reserve allows for stable, multi-hour operation at maximum throughput, without the risk of overloading the drive, even with very dense product feeds. - Advanced Micro-Cut system: The in-line cutting system guarantees precise, repeatable cutting and homogenization. It enables the achievement of an ideal degree of emulsification, which improves the binding of water and fat, increasing efficiency and enhancing the texture of the finished product. - Automation and integration: The EcoCut Cap 2 model works perfectly in an automated process line, directly with mixers or kneaders, eliminating the need for manual transport of the raw material and accelerating the production cycle.

Condition: used, Year of construction: 2010, Automatic multi-head capping machine, model AZW - type 08, for bottles with metal caps, equipped with a pneumatic cap sorting device, type SWK - 800. Effective output: 2000 - 12000 packages/hour. Total weight: 2000 kg. Electrical power: 2.7 kW. Air pressure: 7-8 bar. Frequency: 50 Hz. Technical documentation: available. Please check my other listings. Credpfxjz S H Tde Aqvsi

Condition: reconditioned (used), functionality: fully functional, Year of construction: 2007, machine/vehicle number: 647/07, overall weight: 1,000 kg, total length: 2,500 mm, total width: 2,500 mm, total height: 4,700 mm, input frequency: 50 Hz, input voltage: 400 V, type of input current: three-phase, Good morning, I have a CWT 95/1200 cooling tower for sale. It is a forced-draft cooling tower. The technical specifications are shown in one of the photos. Credpfxez Szfbo Aqvoi Documents for the forced-draft cooling tower: - Declaration of Conformity - Technical and Operational Documentation - Information Sheet Renovation work carried out: - Motors rewound - Bearings replaced - Sealing systems replaced I am happy to provide any additional information by phone or email.

Condition: used, Year of construction: 2006, The machine was used on a juice production line and is in working order. - 32 rinsing sections responsible for cleaning the inside of the bottles before filling. - 32 filling valves, forming the bottle filling section. - 8 capping heads, forming the section for applying and tightening caps or closures. Output: 3,000 to 8,000 bottles per hour (BPH). Type of packaging: PET bottles. Codpfx Aoz S Irujqvsri

Year of construction: 2020, condition: excellent (used), functionality: fully functional, machine/vehicle number: 20-NL-5012-2, Used Cabero GCHSD089MB/X7S-40 Y V dry cooler. Complete with 14 Ebm-papst W3G800-HG95-07 fans – 50/60 Hz – 0.9 kW – 770 rpm – 800 mm diameter, providing a total airflow of 214,700 m³/h. Also includes a control cabinet with Ziehl-Abegg UNIcon fan controller. Cedpfx Aqex A Tyajvsri Specifications: Brand: Cabero Model: GCHSD089MB/X7S-40 Y V Product type: Dry cooler Capacity: 428.9 kW Number of fans: 14 Fan speed: 770 rpm Coolant: Glycol Airflow: 214,700 m³/h Fan diameter: 800 mm Surface area: 3,428.3 m² Dimensions: 12,650x2,360x1,750 mm (LxWxH) Year of manufacture: 2020 Stock: 1 unit

Condition: good (used), Year of construction: 2022, functionality: fully functional, cooling capacity: 800 kW (1,087.70 HP), type of cooling: air, overall weight: 2,915 kg, total width: 2,140 mm, total length: 8,900 mm, total height: 2,200 mm, warranty duration: 6 months, Dry-cooler BlueBox (Refrion) EK4Y2680.4/2Q 800 KW Cooling capacity: 800 kW (40/35 — +25C) Year of manufacture: 2022 Fluid: Glycol + Water Number of fans: 12 pcs. Fan Diameter: 800 mm Volume: 428 dm³ Credpezwd Nhefx Aqvsi Dimensions: 8.9 x 2.14 x 2.2 m. Weight: 2915 kg. Condition: Used, tested, fully operational CONDITION, TESTING & READINESS The chiller / kaltwassersatz / undergoes seven stages of technical inspection and operational parameter verification. It is also tested at our own test station, with connection to water (or glycol) and adjustment of parameters according to your requirements. After testing, you will receive a detailed report with the operating performance and the overall condition of the chiller. The chiller / kaltwassersatz / is ready for transport and commissioning. Our engineers will assist you with cooling capacity calculations, selection of the appropriate cooling scheme, and configuration of the required equipment options. WARRANTY & SUPPORT The quality of the equipment is confirmed with a warranty ranging from 6 to 36 months. Our company can also offer: - refrigerant charging; - replacement of oil and filters; - technical support. LOGISTICS - Worldwide delivery available - Support with loading, export documentation, and logistics coordination Get a detailed consultation. Photos, videos, and a full testing report can be provided immediately upon request.