Used Scrapers for sale (641)

Condition: as good as new (ex-display), Year of construction: 2025, One-sided automatic edge banding machine with pre-milling unit, direct glue application to straight workpieces, end trimming station with VR function , HF-top and bottom milling unit, chain feed, double roller top pressure and extendable work piece support. For ABS and PVC roll material as well as fixed lengths from 0.4 – 2.0 mm and of 8 – 50 mm work piece thickness. Djdpfx Ajip Uzpob Ascp • Speed: 5,5 m/min. • 2 spaces for finishing unit • 5,6“ Colour Touch screen →Automatic edge feeding for roller material over turntable D = 600 mm →Two reverse, operating-controlled pre-milling units with diamond charged helical joining millers provide a neat and tear-free premilling of the work pieces before the gluing of the edge material →Glue application directly to workpieces: Teflon-coated glue pot with a capacity of 1,5 kg, leak-proof with glue supply from below (excess glue automatically flows back into the glue pot). Glue roller allows exact dosage of glue. Electronic temperature control with automatic stand-by function (reduces probability that the glue burns if the machine is not used for a longer period and is still turned on) →Pneumatically operated cut-off knife from roll material up to 2 mm edge thickness →Pressure unit consisting of one driven pressure roller synchronized with glue spreading roller and one adjustable pressure roller with spring tension for a nearly invisible joint of the edge material with the work piece →End trimming station for front-and back egde with HF-Motor 0,27 KW /12000 U/min ,milling head with interchangeable knives and VR Function for vertical rounding . Automatic setting from workpiece, with dust collector system →High-frequency top and buttom milling station, 2 powerful 0.27 kW high-frequency motors with HM-WPL special millers; suitable for radius and bevel milling, horizontal and vertical scanning of the work piece; aggregate adjustment equipped with digital readouts for setting to various edge types; 2 extraction hoods, height adjustment of the upper aggregate with the top roll pressure →OMRON 5,6“ colour touchscreen controls glue temperature settings, automatic temperature reduction for stand-by function of the machine, switching on and off of aggregates and error diagnosis Additional finish aggregates (1 free space): →Glue scraper unit : Removes eventual glue rests with a slight draw cut from the glue joint of the work piece surface →Buffing unit : 2 motors 0,09 kW, 1,500 rpm provide a super-finish for ABS and PVC edge material 67641340ec347

Condition: excellent (used), Double side - Independent Machine (or 1st and/or 2nd in a line) Edges (tape) thickness in rolls (min/max) mm 0,6 - 3 Panels thickness (min/max) mm 8 - 60 / Working width (min/max) mm 225 - 3000 Numerical Control Power Control PC 22 /Software: Wood Commander Adjustable feeding speed (m/min ) 15 - 32 Distance (center-axes) of the Disappearing Dogs (mm) 400 SIZING PART (for each side): Anti-chipping Milling Unit 1 x Kw 4,5 / Hogging Units KD 11 (2 x Kw 6,6) EDGE-BANDING PART (for each side): Glueing Unit (Hot Melt + Quick Melt Unit) A3 + SERVO Band Pressure zone "A" Edge coils supporting unit (No. 2 reels) Snipping (end-cutting) unit HL 84 (2 x Kw 0,22) Rough Trimming unit (2 x Kw 0,55) Fine Trimming unit 2 x Kw 0,4 Corner Rounding unit (Contour Trimming) FF 12 (4 x Kw 0,4) LEFT SIDE: 2 x Jumping Milling Unit (for grooving) UF11 (Kw 4 x 2) 0°-90° Dcjdpfx Abep N D Ngj Asp RIGHT SIDE: 1 x Jumping Milling Unit (for grooving) UF11 (Kw 4 x 1) 0°-90° Profile edge scraping unit PN10 (PNEU) Finish processing unit (Glue scraper + Buffing unit) FA 11

Condition: used, Double edgebanding machine BIESSE STREAM SB2 10.5 usable as 1st and 2nd machine in a edgebanding line Numerical Control with Sintra Software Dcedpfou Rim Hjx Ab Aop Machine suitable for 1st + 2nd pass of the panel Opening of the mobile shoulder motorized by C.N. mm 3000 Panel height 60 mm Pvc/Abs mm 3 Continuously variable feed speed from C.N. (up to 40 m/min) Working height electronically adjustable by C.N. (up to 60 mm) Opening of the moving shoulder electronically adjustable by C.N. Motorized rubber belt with higher pressure Track with bearings with hidden pins - distance between PINS mm 500 Automatic system for supporting large panels Anti-adhesive group Part to be squared composed of (for each side): * Automatic timed anti-splinter group * Double shredder group * Two-motor grinding group Border part composed of (for each side): * Gluing unit for EVA hot melt glue with pre-melter * Edge pressure group on straight profiles with electronically adjustable pressure rollers by C.N. * 6-position reel magazine with automatic edge change by C.N. * End trimming unit with 2 motors with automatic inclination * Overlapping trimming group with 2 motors * Edge trimming group with 2 tilting motors electronically adjustable by C.N. * Multifunction rounding unit with 4 motors (cornering tool + rounding tool) with numerical control adjustment automatically * Toupie Group (with 2 motors on the fixed left side \ with 1 0-90° tilting motor on the mobile right side) * Electronically controlled edge scraper group by C.N. * Glue scraper group * Oscillating brush group * Phon group

Condition: used, Year of construction: 2024, _____Basic equipment: Frame with ploughshare Hydraulic swivel device left-right Hydraulic installation with quick hydraulic couplings in accordance with DN10-ISO7241-1A Curbstone deflector left-right Three-point attachment plate CAT 2N, 2 and 3N in two mounting heights / for MG-150 to -210 CAT 1N, 1 and 2N OR municipal attachment plate F1, F2 in accordance with EN15432-1:2011 (formerly DIN 76 060, size 3) with lifting system for tension-free lifting and lowering Pressure relief valve Cylinder in strong design, double-acting Pendulum compensation up to 18° Adjustable skids Attachment device screwed Warning flags with holder Parking foot Municipal paint RAL 2011Special equipment:Equipment subject to surcharge:Euro mountWheelsLED lightingPU scraper barsAlso available as a three-point attachment!Price from 7,013.00 (net)The picture serves as an example, can contain special equipment.,Storage location:null Dcsdeu Ebkmopfx Ab Asp

Condition: used, Year of construction: 2005, x-travel 750 mm y-travel 560 mm z-travel 600 mm Control HEIDENHAIN iTNC 530 total power requirement 70 kW weight of the machine ca. 11.000 kg dimensions of the machine ca. m D E C K E L M A H O (Germany) Vertical CNC Machining Centre with high speed linear drives in 3 Axis and in double column design for high precision work Model DMC 75 V LINEAR Year 2005 _____ Working range: Longitudinal stroke X Axis 750 mm Vertical stroke Z Axis 600 mm Cross stroke Y Axis 560 mm Table clamping size 950 x 650 mm Max. Table load 1.000 kg Max. height of workpiece 600 mm Tool holder Cone HSK 63 Spindle (KESSLER) speeds 18,000 rpm Torque, max. 86/130 Nm Spindle run-up time / stop time 3.2 sec Feeds / Quickfeeds, X, Y and Z Axes max. 90,000 mm/min Feed force 11.000/9.500 N Axis acceleration, X / Y / Z Axes 15 / 12 / 18 m/s Spindle drive 25/35 kW Total electrical load, approx. 75 kW - 400 V - 50 Hz Weight, approx. 11.000 kg Accessories / Special Features: Dcedpfot Hw Trsx Ab Ajp This machine is very interesting because of the very stable double Column Portal Design and with the modern linear technology for fast and powerful high precision work. * HEIDENHAIN modern CNC Control System Model iTNC 530 in 3 axes, with all the usual options, cycles and sub programmes. * Table moves only in x axis and allows a comfortable loading of heavy workpieces * 30-position disktype tool magazine for max. tool Ø 100, 140 and 200 mm x max. length 300 mm. Max. weight 10 kg. Cut-to-cut time 6 sec. Pick-Up by main spindle. * BLUM tool-breakage control, Blum Receiver for RENISHAW –Head, no head available. * Double linear motors ensure very fast feed motions and strong feed power, equipped with own cooling system. * KESSLER Milling Spindle, Liquid-cooled, steplessly programmable up to 18.000 rpm * Completely covered working area with 2 sliding doors, one with spin-type bull-eye. * KNOLL Coolant device with scraper-type chip conveyor and pressure pomp. * Spindle working hours approx. 23.000 h Condition : Very good. Machine can soon be inspected under power. Delivery : Ex stock, as inspected. Payment : Net, after conclusion of contract.

Condition: new, Year of construction: 2026, Machine for processing sinks made of materials such as sintered quartz, granite, granite composites and ceramic models, etc. Technical data: MILLING PLOTTER 1325 PRO+ WORKING AREA 1300X2500MM Z AXIS RANGE 700MM - PRO OMRON SERVO AC HIGH SPEED DRIVES (SET WITH PLANETARY GEARS) 1.5KW ETHERCAT INTELLIGENT ENERGY RECOVERY OSAI OPENSMART REAL-TIME INDUSTRIAL CONTROL SYSTEM, CYCLE TIME BELOW 2MS, SUPPORT UP TO 16 AXES, ETHERCAT COMMUNICATION WITH THE CONTROL CABINET AUTO CALIBRATION OF THE GATE ANGLE EUCHNER HBA-103037 HAND MANIPULATOR CONTROL CABINET AIR CONDITIONING TOOL LENGTH SENSOR (60MM) AUTOMATIC CENTRAL LUBRICATION WITH SKF SOLID GREASE BEAM SYSTEM PNEUMATIC CLAMPS SINK FIXING SYSTEM Dcjdpsualqqsfx Ab Aep DUST REMOVAL CHANNELS BALL SCREW COVER ON THE Z AXIS BLOWING SYSTEM FOR RIDING ELEMENTS VACUUM SENSOR SYSTEM DOUBLE SCRAPER SET

Condition: used, Year of construction: 1995, Used machine Year of manufacture: 1995 Equipment and technical data: Glue tank with glue roller Pre-cutting knife 4 pressure rollers 2-motor cutting unit Radius milling unit Dcjdpfx Aowpm Igjb Asp Flush milling unit Radius scraper Edge thickness: 0.2 - 6 mm Workpiece width min.: 70 mm Workpiece height: 8-42 mm Feed speed: 12 m/min. Shipping dimensions: 370x100x125 cm Weight: 1330 kg Location: Röllbach Availability: short term

Condition: used, Year of construction: 2024, _____TK-III 340, three-point attachmentBasic equipment: Frame with 3 ploughshares Hydraulic swivel device left-right Hydraulic installation with quick hydraulic couplings in accordance with DN10-ISO 7241-1A Curbstone deflector left-right Three-point attachment plate CAT 2N, 2 and 3N in two mounting heights Pressure relief valve Cylinder in strong design, double-acting Pendulum compensation up to 14° Additional springs for lateral inclination in the pendulum system Adjustable skids Warning flags with holder Parking foot Distance block for stop angle 36° Municipal paint RAL 2011 Steel scraper barEquipment subject to additional charge:Wind deflectorAlso possible with DIN attachment!Price from 13,408.00 (net)The image serves as an example, can contain special equipment.,Storage location:null Dcodpeu Ebktefx Ab Aep

Condition: new, Year of construction: 2026, Edge thickness 0.4 - 3 mm Thickness of glued boards 12 - 45 mm Minimum length of glued boards 80 mm Minimum width of glued boards 60 mm Mechanical feed speed 8 / 11 / 13 m/min. Glue temperature 185 - 210 ℃ Tank capacity 2.5 - 3 kg Pre-milling head speed, main 12,000 rpm Rounding radius R=2mm Working pressure compressed air pressure 6 - 8 bar Pre-milling unit 1.8 kW x 2 Glue application roller unit 0.75 kW Dodpfxjv Dt Spo Ab Ajcp Glue heating unit 1.5 kW Final milling unit 0.37 x 2 kW Main milling unit 0.75 kW x 2 Transport belt unit 1.5 kW Overall dimensions 3850 x 700 x 130 mm Weight 1000 kg Pre-milling: diamond cutter. Gluing Cutting Milling: two motors Radial scraper Flat scraper (glue) Spray system Polishing Interior lighting Automatic lubrication

Condition: used, Year of construction: 2008, Used machine Year of manufacture: 2008 Edge Control control system with 18.5" touchscreen color monitor 16:9 Swiveling operator panel, Program storage, Motorized pressure bar adjustment, Feed via transport chain, Feed speed: 8-18 m/min Extendable workpiece support, Infeed fence with motorized adjustment Jointing unit 1961, Diamond jointing cutter for climb and counter rotation, Automatic adjustment to workpiece height Edge feed 1903 Pre-trimming up to 3 x 45 mm (depending on material) Glue application system 1905 Multi-System Automatic glue height adjustment with sensor nozzle, Pressure regulator for adjusting the cartridge contact pressure, Use of PUR adhesives possible, Pressure unit 1913 MOT, First roller driven End trimming unit 1918 with pneumatic adjustment End trim saw pneumatically swiveling, Multifunction unit 1824 MOT 4 with multifunction cutter radii 1,2,3 mm Corner copying unit 1832 Corner copying up to 3 mm edge thickness Radius scraper 1929 MOT 2 With motorized adjustment of horizontal tracing rollers With pneumatic adjustment (top and bottom separate) Chip collection box for radius scraper, Surfacing scraper 1964 For removing glue residue for a clean glue line With extraction hoods Spray unit 1856 for infeed and outfeed area Buffing unit 1940 For finishing and edge polishing ----- Technical Data ----- Edge thickness roll material: 3 mm, Edge thickness strip material: 8 mm, Max edge thickness for corner copying: 3 mm, Workpiece thickness: 45 mm, Workpiece thickness for corner copying: 45 mm, Min. workpiece length: 180 mm, Feed speed: 8-18 m/min, Distance workpiece support: 470 mm, Support table diameter for edge material: 800 mm, Dedpfxov Sv Ens Ab Ascp End cut knife for coiled material up to: 3 mm, Heating time: 3.5 min, Jointing unit power: 2 x 2 kW, End trim saw power: 2 x 0.22 kW, Milling station power: 2 x 0.35 kW, Corner copying power: 0.22 kW, Extraction port jointing unit: 120 mm, Extraction port milling unit: 70 mm, Extraction port scraper unit: 70 mm, Total length: 5,350 mm, Dimensions (LxWxH): 5,350 x 1,669 x 1,940 mm Picture of operating hours taken from a recording in 2022 Availability: short term Location: Röllbach

Condition: used, Year of construction: 2015, Numeric Control Startouch Control System Panel height mm. 60 Edges in PVC/Abs rolls mm. 3 Solid wood in strips mm. 6 Feed speed up to 11 m/min Working height adjustable electronically by C.N. Panel support guide with adjustment Dcjdpfstxtzksx Ab Aep Side roller conveyor with idle wheels for panel support Anti-adhesive group Adjustable two-motor rectifier unit Reel holder plate Gluing group for EVA glue Edge pressure unit on straight profiles with adjustable pressure rollers Trimming unit with 2 motors with automatic inclination adjustment Gleaning unit electronically adjustable by C.N. Multifunction rounding unit (edner + rounder) adjustable by C.N. Edge scraper unit Glue scraper unit Oscillating brush group

Condition: used, Year of construction: 2018, Numerical Control BH 660 with BIESSE BSolid software bEdge module for edge management bSolid surface design Sophia - IoT Connection Office control Working range on X-axis mm 3228 Working range on Y axis mm 1580 Working range on Z axis mm 200 with H74 mm suction cups Working range on Z axis mm 245 with H29 mm suction cups No. 8 adjustable ATS panel support bars Installation of the pneumatic lock divided into two zones in Y No. 6 Pneumatic Bakelite bars for panel lifting No. 3 adjustable suction cups for bar Set-Up Assistant for Suction Cups No. 1 electrospindle (pantograph) with 4 axes, automatic tool change, KW 13 (HP 17.4) motor, cooling liquid, HSK cone attachment, 20000 RPM Automatic tool change with 16 positions on the X-axis of the carriage Drilling tesa BH17 independent spindles arranged as follows: No. 5 independent spindles for vertical drilling in the "X" direction No. 5 independent spindles for vertical drilling in the "Y" direction No. 4 spindles for horizontal drilling in the "X" direction No. 2 spindles for horizontal drilling in "Y" direction No. 1 blade integrated into the drilling head diam 120 mm (useful cut 25 mm) GU60L gluing unit for EVA glue with pre-melter - edge pressure system with double rubber roller for spokes maximum internal 30 mm and edge joint sensor - 500 ml glue pot installed on the glue roller - lamp edge heating - edge feed system - edge cutting system - possibility of Introduction of the manual edge Dcodpfx Abeugpwnj Aep Plastic edge thickness from 0.4 to 3 mm Wood edge thickness from 0.4 to 2 mm Laminated edge thickness from 0.4 to 1.2 mm Maximum edge width 65 mm Workpiece thickness from 10 to 60 mm Minimum internal radius workable with 30 mm edging Maximum external radius for edging, proportionate to the thickness and stiffness of the edge: * 10 mm with edge up to 1 mm thick * 20mm with 2mm thick edge * 30mm with 3mm thick edge Minimum dimensions of the edging panel 300 x 300 mm Minimum internal diameter for edging: 350 mm with plastic edges less than 1 mm thick and with panel maximum thickness 18 mm 2-position edge storage unit positioned inside the protective casings for edges with maximum thickness 65 mm Finishing aggregate cleaning station with automatic dispensing of special cleaning liquids and with a cleaning cycle No. 1 aggregate for edge trimming / rounding No. 1 EF60A combi aggregate trimmer / edge scraper / glue scraper Perimeter protection grids Chip evacuation system with motorized belt Liquid cooling system Automatic lubrication system No. 1 vacuum pump of 250 m3/h TECHNICAL DETAILS TO BE CONFIRMED

Year of construction: 2009, condition: good (used), functionality: fully functional, Production of 2000 kg/day (6h) Composed of: URBASA Q908.010b slicer MARRODAN PR32318 B/T elevator to load scalder. With PVC/Polyurethane 3C 500 band with studs. overall length: 3000mm. useful width: 500mm. Power 0,37 Kw MARRODAN PR32217 Linear mesh scalder, for vegetable products. The regulation of the scalding/hydrating system is carried out by means of a temperature controller connected to a PT100 probe. The forward speed is regulated by a frequency variator. Dsdpfxjv Ivcxj Ab Aecp Basic construction in AISI 304 STAINLESS STEEL Polypropylene mesh type A-1061mm Total installed power: 4.7kW Group of 2 pulping machines and 250-litre heated tanks for mixing and cooking INOXPA HYGINOX SE centrifugal pump of STAINLESS STEEL, driving the product to exchanger. UNICUS type HRS dynamic heat exchanger with scraper device to increase the heat transmission coefficient AVAILABLE DOCUMENTATION

Condition: used, Mixing: 1 planetary paddle, 1 bottom scraper, 1 side scraper Possibility of integrating a lateral rotor/stator agitator (this request may be subject to an additional quotation). Side scraper and its support not available (this request may be subject to an additional quotation). Vessel : Material : stainless steel Total volume : 400 L Maximum pressure: 0.4 bar Tilting: yes Spray nozzle circuit Jacketed : Dcedpfoyfw Inex Ab Aop Capacity : 30 L Maximum pressure: 6 bar   Electrical cabinet Machine dimension : 140 x 165 x 240 cm Videos available on request

Condition: like new (used), Vacuum filler Continuous vacuum filler for straight filling and portioning Machine features: All-in-one 250 l hopper with counter arm and reinforced scraper, Integrated vacuum pump 20 m³, Double screw, Standard double screw housing, Control: PC, Program memory for 99 filling programs, Portion weight: from 5 up to 60,000 g, Lifting and tipping device for HPC with 250 l hopper, To fit standard trolley, 200 l capacity, Machine dimensions in cm: Width: 134.0 Length: 220.0 Height: 200.0 Power: 9.5 kW Voltage: 380 V, 50 Hz Weight: 1300 kg Djdpew Up Ncofx Ab Ajcp

Condition: new, We supply wear parts for your Doppstadt AK 430, 435, 510, 535, 560, 635, 640, etc. Highest quality thanks to 'Made in Germany'! - Rear baskets - Rear flaps - Impact plates, toothed, with counter blade, smooth Dodpfx Aow I Ar Rsb Aecp - Wear plates - Scraper floor bars - Scraper floor chains - Flail tips - Flail holders - And much more.

Condition: excellent (used), Double side - Independent Machine (or 1st and/or 2nd in a line) Edges (band in rolls) thickness (Min/Max) mm 0,3 / 3 Panels thickness (min/max) mm 12 / 60 Working width (min/max) mm 225 / 2500 Numerical Control PC 22 /Software WoodCommander Adjustable feeding speed (m/min) 15 - 40. Safety and sound-proof enclosures/cabins Distance (center-axes) of the Disappearing Dogs (mm) Dsdpjwxwyfofx Ab Aecp SIZING PART (for each side): Spraying unit (Anti-sticking liquid) Anti-chipping Milling Unit 1 x Kw 4,5 Hogging Units KD 11 (2 x Kw 6,6) . Free space EDGE-BANDING PART (for each side): Glueing Unit (P.U.R. Glue + Quick Melt unit) QA 34 (FeMa-Tech) Pressure zone (N.C. adjustment) "A" Edge coils supporting unit (No. of reels) 6 Snipping (end-cutting) unit HL84 (2 x Kw 0,22) 0°-30° Rough Trimming unit (2 x Kw 0,55) Multi-Profile Copying unit by N.C (fine and contour trimming) FK 13 (2 x Kw 0,4) revolver 8+8 Free space Profile Scraping unit (Multi-profile, by N.C.) MN 21 Finish processing unit (Glue scraper + Buffing unit) FA 11 OPTIONAL: Milling grooving unit UF11 (1 x Kw 4)

Condition: ready for operation (used), Year of construction: 2019, operating hours: 2,975 h, travel distance X-axis: 600 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 450 mm, controller manufacturer: HEIDENHAIN, controller model: TNC 640, total height: 2,720 mm, overall weight: 4,350 kg, This 3-axis AXILE V4 vertical machining center was manufactured in 2019. It features a robust table size of 770 × 410 mm with a maximum load capacity of 400 kg. Equipped with a high-speed ISO40 spindle capable of 12,000 rpm, it ensures efficient machining. The machine includes a 30/32 tool arm changer and a rapid traverse rate of 36 m/min, enhancing productivity. Consider the opportunity to buy this AXILE V4 vertical machining center. Contact us for more information. Additional equipment Dcedpfx Abox D Iydj Aep • T-slots: 16 × 100 mm (4 pieces) • Speed: Standard: 12000 rpm /Optional: 18000 rpm or 24000 rpm • Motor power: Heidenhain: 10/12.5 kW /Siemens: 10.5/15.8 kW /Fanuc: 11/15 kW/ Optional: 20 kW • Axial Accuracy Control (AAC) / Spindle Vibration Supervision (SVS) / Tool-tip Positioning Control (TPC) • Standard: 30 or 32 tools/ Optional: 40 tools • Tool holder: BT / CAT / DIN 40 / HSK 63 /Change time (tool-to-tool): 1.55 s (50 Hz) / 1.31 s (60 Hz) • Max. Tool dimensions: Diameter: Ø75 mm (Ø125 mm with empty neighboring compartment) / Length: 300 mm /Weight: 7 kg • Tool changer (ATC) Type: Arm change • ISO40 in-line spindle (12000 rpm, with CTS function) / Spindle oil cooler / Arm tool changer (30/32 tools) • Coolant tank (20 bar) / Scraper chip conveyor / Linear encoder for all 3 axes / Backwash device / Flushing gun / Heat exchanger / 4th axis prepared (switching circuit) Machine Benefits Technical Machine Benefits • Table: size: 770 × 410 mm / height: 820 mm / max. Load: 400 kg • Accuracy: repeat accuracy (x/y/z): ±0. 01 mm / positioning accuracy: 0. 01 mm over 300 mm / feed speed (rapid traverse): 36 m/min (x/y/z) • Guide rails: linear guideways (35 mm ball) x: 300 mm distance/ y: 620 mm /distance z: 400 mm/ distance • Axis drive: recirculating ball screws: Ø32 × p12 × c3 (for x, y, z) • Max. Load weight: 160 kg (standard) / 200 kg (optional) • Floor area: 3195 × 1910 mm • Spindle center to z-axis guard: 475 mm/spindle nose to table: 100-550 mm Dimensions Machine Depth 3195 mm

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, workpiece height (max.): 50 mm, edge thickness (max.): 3 mm, rotational speed (max.): 10,960 rpm, Equipment: CE marking, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Maximum panel thickness: 50 mm Minimum panel height: 8 mm Maximum panel height: 50 mm Minimum edge thickness: 0.4 mm Maximum edge thickness: 3 mm Number of positions: 1 Unit 1 Unit: End trimming Dcedpfx Ajxw Tugjb Aop Number of motors: 2 Automatic engagement by time: yes Motor power: 0.18 kW Speed: 10,800 rpm Unit 2 Unit: Edge milling Number of motors: 2 Automatic engagement by time: yes Motor power: 0.27 kW Speed: 10,960 rpm Unit 3 Unit: Edge scraper Control system: BFS MACHINE DETAILS Installed total power: 4 kW EQUIPMENT Upper pressure Pressure by spring-loaded rollers Panel support guide Magazine for the coil EVA glue system Hot-melt glue pot Edge pressure roller track Number of pressure rollers: 3 CE marking

Condition: used, Year of construction: 2020, Used machine Year of manufacture: 2020 Features: - Aggregate control via touch-screen - Joint milling unit - Glue pot - End trimming unit - Radius milling unit - Radius scraper unit - Flat scraper unit - Buffing unit - Spraying unit (front and rear) Location: Rhineland-Palatinate Dcsdox Enquspfx Ab Aop Availability: By arrangement Sale on behalf of customer. Details provided without guarantee.

Condition: new, This listing is for informational purposes only and does not constitute a legally binding offer. Dcodpfx Ajyk Tvfeb Aep The ultra-light straight snow blade features a compact, lightweight design, making it ideal for winter maintenance of agricultural land as well as municipal areas such as clearing yards, walkways, parking lots, and residential streets. The low dead weight allows it to be used with carrier vehicles of low engine power. The scraper bar is available either in wear-resistant steel or rubber. Blade angle adjustment is manual in one of five positions (optional hydraulic adjustment directly from the driver's cab via a hydraulic cylinder). The plough is equipped with a support leg. 1500 mm Working width: 1500 mm Length: 910 mm Width in working position: 1470 mm Height: 630 mm Weight: 136 kg Sheet thickness / blade profile: 4 mm Number of rubber blade segments: 3 pcs. Price: 1000 € net 1190 € gross 1800 mm Working width: 1800 mm Length: 910 mm Width in working position: 1750 mm Height: 630 mm Weight: 148 kg Sheet thickness / blade profile: 4 mm Number of rubber blade segments: 4 pcs. Price: 1100 € net 1309 € gross 2000 mm Working width: 2000 mm Length: 910 mm Width in working position: 1930 mm Height: 630 mm Weight: 156 kg Sheet thickness / blade profile: 4 mm Number of rubber blade segments: 4 pcs. Price: 1200 € net 1428 € gross

Condition: excellent (used), Year of construction: 2008, The deep hole drilling machine is in very good condition! Deep hole drilling machine type TBM 120-2000 Drilling system BTA Min. drilling diameter D 35 mm Max. solid drilling D 130 mm Max. counterboring D 170 mm Main spindle block with two-stage gearbox -Drive Ax AC motor 37 kW with brake for spindle locking 1200-1500 rpm -Drill spindle block with two-stage gearbox 50-500 rpm, 450-1200 rpm, electrically switchable. Optional rotating / stationary tool. Main spindle box (tailstock) with two-stage gear electr. switchable Tailstock with counter-rotation Optionally with or without counter-rotation Hydraulic jaw chuck. Dedpfx Aboq A S Ekj Ascp Main and drill spindle speed continuously adjustable Machine bed as welded construction Guideways in linear roller design size 65 -Drill carriage movement via ball screw, gear and servo motor 3 kW Rapid traverse max. 3000 mm/min Maximum feed rate: 1000 mm/in. Hydraulically attachable drill bushing holder 2 x attachable steady rests 2 x roller pre-centering devices D20-100 mm 2 x Boza drilling range D 8-200 mm with chip chute and suction pump Scraper conveyor -1-axis CNC control PS 100 SFT for controlling and monitoring the drilling cycle Torque monitoring of the drilling spindle and feed rate in % painting: blue/gray, RAL 5015/7035

Condition: repair required (used), Year of construction: 2005, machine/vehicle number: 2731660/C 0000, functionality: not functional, operating hours: 44,050 h, travel distance X-axis: 600 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 425 mm, Machining center with chip conveyor and belt filter system. Travel X/Y/Z 600/400/425mm Speed range 20 to 18,000 1/min AC main drive 35/25 kW (40/100% ED) 3D path control SINUMERIK 840D powerline Tool change/ 25 magazine positions HSK-A 63 tool holder Shuttle table Clamping surface 2x660x400 mm Infrared measuring probe Heidenhain TS 641 Internal cooling lubricant supply (IKZ) 40bar / 23l/min / 600L container Scraper belt conveyor discharge height 1000mm incl. coolant tank 200L Gravity paper belt filter Rotating viewing window Oil and emulsion mist separator with mechanical filter Work area flushing - chip flushing Flow rate: 100l/min Pressure: 1bar Electronic handwheel SIEMENS SINDIC data transmission between network and SINUMERIK 840D Machine is sold as in need of repair. There is a defect in the sensor for the tool changer (position detection). Dcodpfx Ajrl Rwxob Aop Please send technical questions in writing. >>> Commercial sale

Condition: as good as new (ex-display), Year of construction: 2023, One-sided automatic edge banding machine with pre-milling unit, direct glue application to straight workpieces (EVA-PUR Glue pot with run-out function/optional), 2-motor HF-cut-off saw station, HF-top and bottom Multiprofile milling unit, 2-motor corner rounding unit, chain feed, motorized beam pressure with encoder and ball-bearing double roller top pressure, extendable work piece support, signal lamp for work piece sequence, synchronization of working units by encoder as well as L-Motion control (18-axis). For ABS, PVC, melamine and strong wood veneer roll material as well as fixed lengths from 0.4 – 3.0/5.0 mm and of 10 – 60 mm work piece thickness. →Automatic edge feeding for roller material over turntable D = 800 mm. →Longer infeed lineal (650 mm) →Pre-milling units :Two reverse, operating-controlled pre-milling units with diamond charged helical joining millers provide a neat and tear-free premilling of the work pieces before the gluing of the edge material. →Glue application directly to workpieces: Teflon-coated glue pot with a capacity of 1,5 kg, leak proof with glue supply from below (excess glue automatically flows back into the glue pot). Glue roller allows exact dosage of glue. Separate glue roller temperature adjustment. Electronic temperature control with automatic stand-by function (reduces probability that the glue burns if the machine is not used for a longer periods and is still turned on). Optional: EVA/PUR glue pot with run out / cleaning function for quick change of glue Dcodof Tdwcjpfx Ab Asp →Pneumatically operated cut-off knife from roll material up to 3mm edge thickness. →Automatic feeding magazin (70mm magazin capacity) with spiked roller for solid wood. →Pressure unit consisting of one driven pressure roller synchronized with glue spreading roller and two of smaller diameter, conical, one positive and one negative pressure roller with pneumatic tension for a nearly invisible joint of the edge material with the work piece, program-controlled setting for edge thickness via L-Motion Motor →High-frequency cut-off saw equipped with 2 HF motors 0.55 kW, 12,000 rpm , 2 saw blades and high-precision linear guides ensure a clean and precise saw cut, with extraction hoods. Pneumatically tilting from the screen →High-frequency top and buttom milling station, 2 powerful 0.55 kW high-frequency motors with Multifunctional tool (straight + 3 different radius), horizontal and vertical scanning of the work piece; 3 L-Motion motors each for positioning of the horizontal copy shoes, positioning of the vertical copy shoe and positioning of the multifunctional tool →Corner rounding unit : Automatic processing of corner edges up to 3 mm edge thickness. Equipped with 2 high frequency motor 0, 27 kW, selectable on operating panel. One side (front or back edge) or both side corner rounding unit. 2 L-Motion motors each for positioning of the horizontal copy shoes and positioning of the tool. →Rotatable control panel with 10“ color touch screen controls glue temperature settings, automatic temperature reduction for stand-by function of the machine, switching on and off of aggregates and error diagnosis, the motorized beam pressure, extensive program memory and fully automatic operation of the processing units via L-Motion Motors →Mulitprofile Radius scraper unit : With a slight draw cut eventual radius milling traces are removed to provide a perfect finish. It is equipped with a multiprofile t

Condition: used, Year of construction: 2019, Smart Touch Numerical Control with Sintra HD Software Panel height 10 - 60 mm 22 mm solid wood Dcsdpor Ip Sdofx Ab Aop Pvc / Abs mm 3 Feed speed up to 25 meters / min Working height electronically adjustable by C.N. Motorized rubber belt with higher pressure Motorized and electronically adjustable panel support guide by C.N. Side roller conveyor with idle wheels for panel support ADZ-700 anti-adhesive group Rectifier unit with 2 electronically adjustable motors by C.N FI-502 Lamps to heat the edge of the AdIRL-700 panel Reel holder plate at 1 position Gluing unit for EVA hot melt glue with QM-705 glue pot Additional glue tank Edge pressure group on straight profiles with electronically adjustable pressure rollers by C.N. Anti-adhesive group End trimming unit with 2 IN-801 motors Offset trimming / gleaning unit with 2 motors electronically adjustable by C.N RF400 PRO-NESTING KIT for gleaning unit Non-stick group Rounding unit with 2 multifunction motors (gleaner + rounder) AR30 NC LPT-700 non-stick liquid application system Electronic edge scraper unit electronically adjustable by C.N RB400 PRO-NESTING KIT for edge scraper group RCC-701 glue scraper unit Brush group "SP-501" "PH-700" hairdryer group