Used Scm Windor 60 for sale (586)

Condition: as good as new (ex-display), Year of construction: 2025, ST 3 classic F 23 - Combined sawing-routing machine With tiltable saw blade, tiltable milling spindle and format sliding carriage made of anodized aluminum Sturdy cast steel construction Large support surface and precise cast iron table High-precision format sliding carriage made of anodized aluminum (travel 2250 mm) Large extension arm (900 x 600 mm) with telescopic aluminum stop Max. Saw blade Ø 315 mm with scoring device, swiveling from 90°-45°. Saw parallel fence with fine adjustment Stable sawing unit and large dimensioned double cradle frame unit guarantee highest stability, precision, smooth running and long service life Solid and precise machine table made of stress-free cast iron 3 milling speeds, manually adjustable from 3.500 - 10.000 min-1 With right-left rotation of the milling spindle Standard arc milling protection hood Two 5.0 kW motors with high power reserves Cast iron milling unit top mounted on both sides precision ball bearings on top close to the lever point four optimally graduated milling speeds, enabling the grinding of workpieces Powerful motors Industrial motor, 100% duty cycle suitable for continuous use (full load) Scope of delivery: Curved fraise protection hood anodized aluminum format sliding carriage aluminum stop jaws folding stop jaws Technical data Dimensions cast iron worktable 1112 x 430 mm working length 2250 mm max. saw blade Ø with/without scoring 315 mm max. cutting height at 90°/45° 100/70 mm max. cutting width 2660 mm Hsdpfxecnwydo Aa Ejg saw blade tilting 90° - 45° cutting width 900 mm speed 4000 1/min. table cutter - spindle tilting 90° - 45 useful length of spindle 100 mm max. tool Ø 210 mm max. tenon tool Ø 275 mm max. tool-Ø retractable 180 mm speeds 3.500/7.000/10.000 1/min. General - motor power 400 V/50 Hz/S6 40% 2 x 5,0 kW ( 6,6 PS) Weight 470 kg Suction nozzle-Ø 2 x 120 mm Suction nozzle-Ø saw blade guard 60 mm Location: Ex stock 54634 Bitburg - immediately available -

Condition: used, functionality: fully functional, planing width: 520 mm, total length: 3,100 mm, total height: 1,500 mm, total width: 800 mm, overall weight: 900 kg, table length: 3,050 mm, planer shaft diameter: 120 mm, working width: 520 mm, number of planer blades: 4, – CE marking – machine as new TECHNICAL SPECIFICATIONS – max. planing width: 520 mm – cutterhead diameter: 120 mm – 4-knife cutterhead – TERSA knives – noise reduction comb at cutterhead – jointer shaft guard – table width: 51 cm – table length: 305 cm – hydraulic lifting by pedal – height counter – motor: 7.5 kW – tilting fence – manual star-delta switch Hsdpfxsw Iqa Nj Aa Eog – extraction port connection: 120 mm – two adjustable tables – quiet operation – full factory cast iron body – original factory paint – dimensions (L/W/H): 310 x 70 x 150 cm – weight: 900 kg

Condition: used, Year of construction: 2015, total length: 2,300 mm, total width: 1,950 mm, total height: 1,850 mm, Empty weight: 1.240 kg Price: On request - Year: 2015 - Documentation available: No Hjdpfjxhchdjx Aa Esg - CE marking present: Yes - CE certificate present: No - Serial number: AB/222595 - Voltage [V]: 400 - Current consumption [A]: 10 - Transport dimensions: 2300mm x 1950mm x 1850mm (l x w x h) - Transport weight [kg]: 1240kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Glenn Smeets

Condition: excellent (used), Year of construction: 2018, SCM Línvicilbe SI3 Panel Saw Type: SI 3 Year of manufacture: 2018 Control: 3-axis Length of aluminium table: 3,200 mm Cutting width right of the saw blade: 1,500 mm Hjdsx Dbi Espfx Aa Esg Motor power: 7 kW (minimum) Scoring unit Saw blade diameter: 400 mm Maximum cutting height: 140 mm Touchscreen with operation for: Automatic height adjustment Automatic tilt adjustment Automatic parallel fence

Condition: used, Year of construction: 2018, functionality: fully functional, Morbidelli M100 Working area 3110x1320 Z180 Remote control with 7" touchscreen display 11-position traveling tool changer 14-position tool changer Vacuum pump, output 250/300 m³/h 23-spindle drilling unit 5-axis unit 10 kW Laser system for positioning of vacuum cups 12x vacuum cups 145x145 H=75 mm 6x vacuum cups 145x55 H=75 mm, rotatable Hedpfxsx N Ar Is Aa Eeg

Condition: used, Year of construction: 2023, Cutting area: 5600x5600 mm 1x Gabbiani G 3 130 (56) - High-performance panel saw 1x Compact label printer 1x "eye-M EVO" operating console 1x Human-machine interface software (HMI) MAESTRO ACTIVE 1x Maestro Pattern 1x High-performance fixed air cushion table with guide, 2500x600 mm, with infeed rollers 3x High-performance movable air cushion table - 2500x600 mm, with infeed rollers 1x Double lateral automatic aligner with motor drive 1x Foot switch for START/STOP of operating cycle 1x Grooving device with height-adjustable saw blade via control system 1x "Autosetting" device on the saw carriage for cut length/width Hjdpfx Asxlvktoa Eeg 1x Main saw blade motor 25 HP (18 kW) 50 Hz with star-delta starter 1x Quick-clamping of saw blades with mechanical "AKE" flanges 1x Selective collet closure (area 0 - 1600 mm) 3x Additional double collets 4x Additional single-finger collets 1x Compact office label printer 1x Cut editor 1x Maestro Optiwise - Advanced - No. 1 license 1x Maestro Connect: service contract for 1 year (including "plug & play" gateway kit) 1x Base 1x MACHINE LANGUAGE: German 1x PC LANGUAGE: GERMAN 1x SPEC01 special version 01 1x European safety regulations (CE marking) Including 123 hours of on-site commissioning (within Germany) (daily working time is 8 hours including travel time). Includes 1 day online training for MAESTRO OPTIWISE PRO (as required) Includes 1 year MAESTRO CONNECT Includes MAESTRO PATTERN IMPORT (normally €255 - free of charge) Location:

Condition: new, Year of construction: 2025, LAB 300 PLUS F 16 TERSA - Universal multiple combination with aluminium sliding table and three milling speeds for sawing, milling, planing/thickness planing and optional slot drilling torsion-resistant cast steel construction machine table made of grey cast iron, hardened and ground light-weight anodized aluminium sliding carriage, 10 years warranty on wear of the guideways large trimming frame with extendable aluminium telescopic fence and folding fences with combi saw fence with 45° quick adjustment max. saw blade Ø 315 mm with optional scoring device, swivels from 90°-45° helical toothed steel infeed roller for uniform wood infeed when planing thicknesses four milling speeds, manually adjustable standard with right-left rotation of the milling spindle three independent motors for each working unit Hedpfocnxa Nox Aa Ejg scope of delivery: Combi planer/parallel fence arched cutter guard Tersa cutterhead anodized aluminium sliding carriage aluminium stop jaws folding fence eccentric clamping arm Model LAB 300 PLUS F 16 Tersa Article-No. 5500314 Technical data ---Technical data circular saw--- circumference 1600 mm max. saw blade diameter with scoring 315 mm max. cutting height at 90° / 45° 100/79 mm max. clearance width left of saw blade 1660 mm cutting width at rip fence 800 mm saw shaft speed 3500 rpm. saw blade inclination 90° - 45 ---Technical data dressing--- working width 300 mm Dressing table length 1260 mm Ho

Condition: used, Used machine Equipment and technical specifications: - 4-knife planer shaft - Feed speed: 7.5/15 m/min - Surface planer: - Working width: 500 mm - Total table length: 2,200 mm - Motor: 4 kW - Thickness planer: Hodsx Entcjpfx Aa Eog - Minimum working height: 3 mm - Maximum working height: 235 mm - Max. depth of cut: 8 mm - Digital height adjustment display with decimal precision Availability: short-term Location: 63934 Röllbach

Condition: used, For sale: SCM planer machine. Technical condition: good; visually, the machine requires some refurbishment. Hodpfx Aajx Dr Eqs Esg Specifications: - 50 cm planing width - 4-knife cutterblock - Electric height adjustment - Tiltable fence - Motor brake not functioning The machine presents well and performs as it should. With a little attention, it will quickly look as good as new again.

Condition: excellent (used), functionality: fully functional, overall weight: 1,050 kg, grinding height: 160 mm, working height: 900 mm, height adjustment type: electric, Wide belt sander SCM Sandya Uno RCS Working width: 900 mm Working height: 3–160 mm Number of sanding units: 2 Unit with metal roller Combi unit with pad Main motor power: 7.5 kW Hedpfxjx Rf Dis Aa Esg Optical oscillation Two feed speeds: 4.5–9 m/min Weight: approx. 1050 kg

Condition: excellent (used), Independent machine (standing alone) and/or Universal machine (First & Second in a line) Electronic Programmer With separate electric and command panel Safety and sound-proof enclosure No. 1 Vertical column to support the working units Min. useful working width (mm) 220 Max. useful working width (mm) 3000 Min. useful working tickness (mm) 6 Max. useful working tickness (mm) 60 Distance between center-axes of the disappearing dogs (mm) 400 Adjustable (min/max) feeding speed (m/min) 4-24 Hedpfx Aaegz Alxs Ejg Total installed power Kw 40 No. 3 Working groups (for each machine's side): 1 Jumping Scoring Unit Kw 2,2 / Kw 3,2 1 Hogging Unit Kw 5,5 / Kw 7,3 (RPM 3000 / 6000) 1 Jumping Milling Unit Kw 4 / Kw 5,8 (RPM 3000 / 6000)

Condition: new, Year of construction: 2025, Combined saw-milling machine minimax st 3c F 16 Swiveling saw blade, swiveling milling spindle and format sliding carriage made of anodized aluminum Sturdy cast steel construction Large support surface and precise cast table High-precision sliding carriage made of anodized aluminum (travel 2250 mm) Large trimming frame (900 x 600 mm) with telescopic aluminum fence extendable up to 2660 mm with professional stop flaps Max. Saw blade Ø 315 mm with scoring device, tiltable from 90° - 45 Saw parallel fence with fine adjustment Stable saw unit and large dimensioned double cradle milling unit guarantee highest stability, precision, smooth running and long service life Solid and precise machine table made of stress-free gray cast iron Three milling speeds, manually adjustable from 3500 - 10000 min-¹ With right-left rotation of the milling spindle Standard arc milling protection hood Safety turning stop jaws made of aluminum Two motors with high power reserves Two plug-in handwheels for convenient and quick operation Dimensions and weights Hodohp Rdlepfx Aa Ejg Weight approx. 470 kg Connection suction Suction port diameter 2 x 120 mm Suction port diameter saw blade guard 60 mm Electrical data Power drive motor 2 x 5,0 kW Supply voltage 400 V Mains frequency 50 Hz Milling spindle spindle inclination 0 - -45 ° useful length of spindle 100 mm spindle speeds 3500/7000/10000 min-¹ Milling tool diameter max. not lowerable 210 mm lowerable 180 mm tenon milling 275 mm K

Condition: excellent (used), LOADER (BRIDGE-FRAME) WITH DOUBLE PICK-UP STATION Gantry (Portal) machine, belonging to the line (SOFIT code: J10039) Vacuum system (with its pump) N. 2 Vertical supporting columns of the top supporting beam N. 1 Horizontal top supporting beam (where the carriage slide on) Hjdpel Hycwsfx Aa Ejg N. 1 Motorized sliding carriage with horizontal metal arms N. 2 Horizontal metal arms with vacuum cups, adjustables N. 2 Out-side rollers ways (on gound) to in-feed pile of panels to the Loader N. 1 Out-side motorized rollers table (which in-feed the panels to the Unloader) Separate electric and command panel Electronic Programmer PLC MAGELIS Perimetral safety metal grids Working capacity (cycles/min) 10 (ca.) Min/Max panels thickness mm 10 - 60 (ca.) Min dimensions of the panels mm (ca.) Max dimensions of the panels mm 1200 x 3200 (ca.) Total installed motor power Kw

Condition: new, Year of construction: 2025, Description Technical data Scope of delivery Accessories Equipment options Ideal for demanding craftsmen and carpenters The extra long dressing tables made of one piece allow easy dressing of workpieces Hedpfxoff Hdme Aa Esg Working tables are made of grey cast iron, thus insensitive and permanently flat Dressing tables open to the rear, simultaneously, with tension spring support for fast and convenient changeover Thanks to the permanently mounted suction hood, it is not necessary to change the suction hose during changeover, which saves valuable working time. Diagonally toothed steel infeed roller ensures constant and even wood infeed Rubber outfeed roller in the outfeed of the thickness ensures even wood outfeed Material feed with four speeds Planer thickness table adjustment via handwheel with integrated display for planer height On/off switch in operator position Powerful industrial motor The high machine weight ensures highest precision and smooth running. Preparation for slotted hole drilling device Quality Made in Italy Dimensions and weights Length approx. 2250 mm width/depth approx. 1370 mm weight approx. 695 kg Dresser Total length of tables 2250 mm chip removal max. 5 mm fence length 1200 mm fence height 150 mm Dust extraction connection suction nozzle diameter thickness 1 x 120 mm Drive power main motor 7 kW Installation information Space requirement length 2250 mm Space requirement width/depth 1440 mm Explanation of space requirements The dimensions take into account maximum travel distances or effective lengths. Thickness Thicknessi [...]

Condition: as good as new (ex-display), Year of construction: 2025, CASADEI F 25 LL FK - table milling machine with tilting milling spindle and table extensions Table milling machine with tiltable milling spindle from -45° to +45 Sturdy cast steel construction Dynamically balanced milling unit anchored to the work table Particularly robust construction Smooth running due to precision aggregates and high dead weight Standard with right-left rotation and electronic blocking when changing direction 5 speeds from 3000 - 10000 min-1 Speed change is easy and convenient from the machine side Standard with MK 4 change spindle system Large work table made of cast iron for long-lasting precision Easy handling due to control elements and speed display on the front of the machine Milling fence with fine adjustment and aluminum fence jaws as standard equipment Powerful industrial motors Equipment details: Fraes fence Fraes fence with crank/handwheel adjustment from the front side With numerical display Interchangeable spindle Interchangeable spindle MK 4 standard on all CASADEI F 23 and F 25 models Option sliding carriage Option sliding carriage for small tenoning operations and for slotting Scope of delivery: Manual tiltable milling spindle from +45° to -45°. Hedpfxodqzcxs Aa Eeg Speed indication via LED at the front Aluminum stop jaws Sheet milling protection cover Right-left rotation of the milling spindle MK 4 interchangeable milling spindle Milling fence with crank/handwheel adjustment from the front with numerical display table extension left and right (2500 mm length) extendable workpiece support (2500 mm length) Model CASADEI F 25 LL FK article no. 5220728 Technical data Dimensions work table 2500 x 810 mm Milling spindle tilting range +45 to -45 degrees useful length of spindle at Ø 30-35 mm 140 mm useful length of spindle at Ø 40-50 mm 180 mm milling spindle stroke 90 mm max. tool Ø profiling 250 mm max. tenon tool Ø 350 mm max. milling tool Ø 160 mm max. tool-Ø lowerable 320 x 60 mm speeds, 5-stage 3000/4500/6000/ 8000/10000 min¯¹ motor power 400 V / 50 Hz / S6-40% 7 kW weight 480 kg suction nozzle-Ø stop 1 x 120 mm suction nozzle-Ø under table 2 x 80 mm Location: Ex stock 54634 Bitburg - immediately available -

Condition: as good as new (ex-display), Year of construction: 2025, minimax c 26g TERSA - multiple combination for sawing, milling, planing-thicknessing. The work tables made of heavily ribbed cast iron and the base frame made of welded steel guarantee torsional rigidity and vibration-free working. Unique in this performance class: lightweight aluminum sliding table, anodized, with ball contact system. Swiveling saw blade from 90° - 45 Table extension arm with aluminum crosscut fence for panels and large workpieces Planing unit with TERSA quick change system with three planing knives Helical toothed steel infeed roller for constant workpiece infeed during thickness planing Curved milling hood for profiling, standard with fine adjustment Milling unit with two speeds Three independent motors for each working unit Quality Made in Europe Equipment details Aluminum sliding carriage With millionfold proven ball contact system Insensitive to dust and dirt due to minimal contact point between ball and trapezoidal rail Durably lightweight Saw unit adjustment Manual height and angle adjustment of the saw unit via star knob Precise positioning by means of a scale TERSA planer cutterhead No more adjusting and screwing Change of planing knives in seconds Self-locking Particularly low noise Table planer The milling unit has two speeds for flexible tool use. The machine is equipped with a finely adjustable bow cutter for profiling. With the aluminum slide tenoning is possible without any problems. Thickness planer With the powerful thickness feed, workpieces up to 200 mm high can be planed. The helical toothed infeed roller guarantees constant infeed. The planing table can be folded towards the inside of the machine to save space. The changeover from planer to thicknesser is done in seconds with one handle. Surface planer Standard with TERSA planer blade quick change system Large dimensioned jointer tables The planing and thicknessing tables are made of grey cast iron and guarantee the smoothest running and vibration-free operation. Saw unit Saw swivels up to 45 With saw blade 250 mm Ø at max. 80 mm cutting height On the rip fence can be cut up to 500 mm width. Table extension With degree scale and aluminum fence for angular cuts on panels and large workpieces Scope of delivery: Tersa quick-change planer cutterhead Anodized aluminum format sliding carriage Miter fence with one folding stop Multifunctional fence for parallel cutting and planing Eccentric clamping arm Model minimax c 26g TERSA Article no. 5500027 Cutting length 1200 mm Hjdpfx Aaodqzh Te Eeg Cutting width with rip fence 500 mm Max. Cutting width left of saw blade 1200 mm saw blade inclination 90 - 45 degrees Max. Cutting height at 90° 80 mm sliding carriage length 1140 mm Format sliding carriage width 201 mm Height of sliding table 70 mm Saw table length 1024 mm saw table width 224 mm saw table height 900 mm Cutterblock type TERSA Cutterblock diameter 62 mm Number of planing knives 3 pcs Planing table width 260 mm Dressing table length 1040 mm Angle of inclination of sawing/planing fence 90/45 degrees Dressing chip removal max. 3 mm Thicknessing table length 450 mm Thicknessing table width 260 mm Thickness working height min. 3 mm Location: Ex stock 54634 Bitburg - immediately available -

Condition: as good as new (ex-display), Year of construction: 2025, Combi 4-way HOLZKRAFT CU 410c F 26 N Tersa -- Technical data -- - Circular saw - circumference 2.600 mm max. saw blade Ø 315 mm max. cutting height at 90°/45° 100 / 79 mm max. clearance width left of saw blade 2.310 mm Hjdod Dtc Tepfx Aa Ejg cutting width at rip fence 900 mm saw blade tilt 90° -45° - Dressing - working width 410 mm planing table length 1.660 mm planing shaft Ø / number of planing knives 72 mm / 3 pcs. - Thickness table dimensions 410 x 605 mm min./max. working height 3 / 230 mm max. chip intake 4 mm feed speed 7 m / min -table milling machine - useful length spindle 100 mm max. tenon tool Ø 275 mm max. tool Ø 210 mm spindle speed 3.500 / 6.000 / 10.000 rpm spindle Ø 30 mm - General - motor power 400 V / 50 Hz, 3 x 5,0 kW (6,6 PS) Suction nozzle-Ø 4 x 120 mm suction nozzle-Ø saw blade protection 60 mm - Special offer price - Location: Ex stock 54634 Bitburg

Condition: new, Year of construction: 2025, Quick belt tension via lever Upper belt support with graphite coating 250 mm large balanced belt rollers ensure optimum drive. With electrical height adjustment With suction and noise protection devices With noise protection certificate With two speeds Adapts to surfaces due to swivel-mounted grinding shoe Angled surfaces Clockwise and anti-clockwise rotation as standard The quick belt tensioning system allows quick and easy changing of the abrasive belts. delivery is carried out partly assembled Dimensions and weights Length approx. 4540 mm width/depth approx. 1510 mm Height approx. 1510 mm Weight approx. 475 kg Dust extraction connection Suction nozzle diameter 2 x 140 mm Work table(s) Work table height adjustment 620 mm max. working width on table 900 mm Electrical data Power of height adjustment motor 0,37 kW Power of suction motor 0,75 kW Drive motor power 3.3 / 4.5 kW Hedpfx Aajff Hdbe Esg Supply voltage 400 V Phase(s) 3 Ph Current type AC Mains frequency 50 Hz Sanding unit grinding belt length 8100 mm Sanding belt width 150 mm Belt speed(s) 9 / 18 m/s grinding shoe length 360 mm grinding shoe width 150 mm Workpiece Height max. 590 mm height max. workpiece longer than work table 180 mm Explanation of height max. workpiece longer than work table Machining of the workpiece with overhang right over the work table possible

Condition: new, Year of construction: 2025, Table milling machine minimax tw 45c With aluminum sliding carriage and swiveling milling spindle - high performance for a low investment Item number 5502045 Brand Holzkraft / SCM TECHNICAL DATA Dimensions and weights weight (net) ca. 290kg Connection suction suction connection diameter 2 x 120mm Working table Working table length 1000mm Sliding carriage length 1000mm working table width 435mm sliding carriage width 270mm table height 900mm Installation information Space requirement length 1945mm machine body width/depth 710mm Space requirement width/depth 2220mm Working area length 1600mm Explanation of space requirements The dimensions take into account maximum travels or useful lengths. Working area Width/depth 1600mm Machine body Length 1000mm Explanation Working area Please add the dimensions given with the space requirement to obtain the free installation area recommended for the machine. Electrical data Supply voltage 400V Power drive motor 5,0kW Mains frequency 50Hz Milling spindle Spindle inclination 0 to -45° Spindle speed(s) 3500/7000/10000min¯¹ Useful length of spindle 100mm Spindle mandrel diameter 30mm spindle protrusion max. over table 130mm Milling tool diameter max. Tool diameter max. lowerable 180mm Tool diameter max. tenon milling 275mm tool diameter max. profile milling 210mm SUPPLY Hedohp Rcyepfx Aa Eog Arch milling protection hood Anodized aluminum sliding carriage Telescopic miter fence Aluminum stop jaws

Condition: as good as new (ex-display), Year of construction: 2025, Minimax ti 55es LL - spindle moulder Figure shows 55 i T s standard version elite The professional craftsman machine with Swivel Milling spindle and 4 speeds. M Digital: motorized height adjustable and Tiltable Stable steel-cast iron construction Large dimensioned milling unit of grey cast iron, swivel up to 45 ° to the rear Display of the cutting speeds by LEDs Quick and easy change of speed of eccentric tension Right left rotation Display height and inclination 1/10 mm exactly Shaper fence heavy-duty professional: with fine adjustment via rack and pinion, with numerical display, ALU stop baking, 3-fold positioned for quick repeat of setting Scope of delivery: Hedpfxedqzh Rs Aa Eeg Aluminium milling stop baking Milling wheel arch guard Extension table left and right Model minimax ti 55es LL Item No. 5502252 Technical data Dimensions of the working table 2500 x 655 mm Formatschiebeschlitten commercial length of spindle dimensions 125 mm Max tool diameter 240 mm Max tool diameter lowerable 230 mm Max tool-Ø pin cutter 320 mm Spindle inclination 0-45 degree Speed 3500/6000/8000/10000 min-1 Engine power 400 V / 50 Hz / S6-40% 5.0 kW Suction nozzle diameter 2 x 120 mm

Condition: new, Year of construction: 2025, Holzkraft Minimax ST 5es - Maximum equipment for professionals Saw-milling combination with miter cutting device and swiveling milling spindle Art. No.: 5501086 Ø 350 mm main saw blade with 118 mm max. cutting height, which is also achieved when the scoring saw blade is installed Scoring unit with separate motor and Ø 120 mm saw blade, easily and precisely adjustable from the outside Saw unit can be tilted from 90° to -45 High-precision format sliding carriage made of anodized aluminum Large extension arm (1200 x 650 mm) With material roller and extendable aluminum telescopic fence up to 3300 mm Pivoting milling spindle from 90° to -45° backwards into the milling fence Four milling speeds With right-left rotation of the milling spindle Three independent motors With lockable main switch, motor protection switch With separate saw-parallel fence and separate jointing fence for dressing as standard Equipment details: Sliding carriage with ball contact system Made of anodized aluminum Guides made of hardened and ground steel, 15% harder than conventional steel Double cradle milling unit Swiveling, made of cast iron Fixing points directly on the table, thus optimal running smoothness Milling spindle mounted far up on precision ball bearings, thus low bearing load and longest possible service life Powerful industrial motors Milling stop Heavy-duty professional version The high-quality milling fence made of cast iron is supplied with fine adjustment as standard 3-fold positionable for quick return of the setting With fine adjustment via toothed rack, numerical display and aluminum milling stop jaws Rip fence With fine adjustment and quick clamping Sturdy round bar guide made of ground steel Conveniently folds down for cutting large workpieces Reversible aluminum ruler for narrow workpieces Cast iron double weigh saw unit Height adjustment via dovetail guide Extremely robust and torsion-resistant for precise cuts Close to the saw blade, mounted on both sides Height and up to 45° inclination adjustable Scoring unit with separate scoring motor 0.55 kW as standard Hjdpfed Hx Hmjx Aa Eeg Boom with angle-adjustable telescopic crosscut fence with degree raster graduation Dimensions and weights weight approx. 900 kg Connection dust extraction diameter of dust extraction nozzle 3 x 120 mm Suction port diameter saw blade guard 80 mm Drive power scoring motor 0,55 kW main motor 2 x 5,0 kW Electrical data Supply voltage 400 V Format sliding carriage and table Width of sliding table 360 mm height of sliding table 142 mm Table length 1380 mm table width 465 mm Milling spindle spindle inclination 0 - -45 ° useful length of spindle 125 mm spindle speeds 3500/6000/8000/10000 min-¹ Milling tool diameter max. lowerable 240 mm tenon milling 320 mm Circular saw unit and scoring unit trimming length 3200 mm Cutting width with rip fence 900 mm Max. Trimming width to the left of the saw blade 3300 mm saw blade inclination 90 - 45 °. Max. Cutting height 90° 104 mm Max. Cutting height 45° 68 mm Location: Ex stock 54634 Bitburg - immediately available -

Condition: new, Year of construction: 2025, 4-knife shaft for best results of Planer Smooth running thanks to precision unit and the heavy casting Front steel feed roller with helical gearing for an optimum feed Satin Steel pull-out roller, optionally with squeegee in the excerpt The working table is mounted on four large pillars that ensure the greatest stability under all operating conditions. The thickness table is adjusted by a Handwheel with numeric display for the planing height (exactly 1/10 mm) Equipped with two speeds, of user facing the front of comfortable selectable Powerful industrial motor Stable steel-cast iron construction Equipment details: Work table Stored on four großdimensonierten screws ensure the stability of the largest under all working conditions Special lifting device correctly maintain the table position, also without lock Tersa Planer knife shaft No adjust and screw more Planer blades change in seconds Self arretierend Particularly low noise Hjdpfjd Hx Hnox Aa Eeg Thickness table adjustment at 41 S elite s through a Handwheel with numeric display for the planing height (exactly 1/10 mm) Dimensions and weights Length approx. 900 mm Width/height 1070 mm Weight approx. 361 kg Connect dust extraction Suction nozzle diameter 120 mm thickness Drive performance 5 main motor kW Installation information Space length 1070 mm Space width/depth 900 mm Space height 1100 mm

Condition: new, Year of construction: 2025, Large dressing tables made of grey cast iron The dressing table is adjusted via a precise parallelogram system so that the distance between the table tips and the cutter head remains the same in every adjustment position The large, stable dressing fence made of anodised aluminium is easy to move and can be tilted from 0° - 45 The inclination of the fence can be read from the workstation With auxiliary stop as standard Large four-blade shaft, precision bearing Smooth running due to precision unit and thanks to the heavy cast iron design Powerful industrial engine Highest possible user safety with simplest operation Display for chip removal via scale Manual table adjustment Motor protection switch Equipment details incl. fold-down auxiliary stop for narrow workpieces Hodsff Efcopfx Aa Ejg Manual quick adjustment of the chip removal with scale & clamping head The protection device The safety guard is foldable and designed to protect the operator without obstructing the work Models TERSA with Tersa planer knife shaft system No more adjusting and screwing Planer knife change in seconds Self locking Especially low noise Perfect planing result Dimensions and weights Length approx. 2750 mm width/depth approx. 1500 mm Weight approx. 680 kg Dresser Total length of the tables 2720 mm Feed table length 1498 mm Chip removal max. 8 mm Stop length 1200 mm Stop height 190 mm Swivel range of dressing stop 90 - 45 ° Dust extraction connection Suction nozzle diameter Thickness

Condition: as good as new (ex-display), Year of construction: 2025, Compact wide belt sander with combined sanding unit Action equipment: - Switching the sanding shoe on and off from the control panel - Switching the roller on and off from the control panel - Electronic control Fox 500 KTR - Table extension with 2 rollers with infeed and outfeed - Automatic table positioning with push button Item number: 5222100A2 Also for smaller craft workshops for occasional use Combination sanding unit with sanding shoe for fine sanding As standard with angular grooved steel roller Ø 120 mm for calibrating Fine adjustment of the working height Clearly arranged control panel on the front side Robust tube-stiffened monoblock steel machine body, robot-welded, working units mounted high up for maximum rigidity Motorized height adjustment of the work table with digital display Electronically controlled sanding belt oscillation Carpet feed via gear motor with two speeds Natural rubber feed carpet with negative profile Flexible steel pressure rail in front of the first unit Hsdegf Sw Njpfx Aa Ejg Rubber pressure rollers, in front of or behind each working unit Pneumatic belt tensioning for each unit with decimal correction option for grain size / belt thickness Universal use for solid wood and veneer thanks to combination unit Entry model for smaller companies Working width 950 mm Equipment details Combination unit for calibrating and grinding Angled steel roller Ø 120 mm with fine height adjustment Hard grinding shoe with graphite support Universal design for calibrating

Condition: new, Year of construction: 2025, 4-knife shaft for best results of Planer Smooth running thanks to precision unit and the heavy casting Front steel feed roller with helical gearing for an optimum feed Satin Steel pull-out roller, optionally with squeegee in the excerpt The working table is mounted on four large pillars that ensure the greatest stability under all operating conditions. The thickness table is adjusted by a Handwheel with numeric display for the planing height (exactly 1/10 mm) Equipped with two speeds, of user facing the front of comfortable selectable Powerful industrial motor Stable steel-cast iron construction Equipment details: Work table Stored on four large screws, ensure the stability of the largest under all working conditions Special lifting device correctly maintain the table position, also without lock Tersa Planer knife shaft No adjust and screw more Planer blades change in seconds Self arretierend Motor thickness table height adjustment at 52 S elite s Height adjustment of the Thicknesser table motor with electronic number For greater precision and more ease of use Dimensions and weights Hodpjd Hx Hpefx Aa Esg Length approx. 1080 mm Width/depth approx. 1440 mm Weight 455 kg Connect dust extraction Suction nozzle diameter 120 mm thickness Drive performance 7 main motor kW Installation information Space length 1440 mm Space potatoes