Used Scm Windor 60 for sale (630)

Condition: good (used), Year of construction: 2007, Technical characteristics : - Max machinable length 3200 mm - Minimum machinable length 200 mm - Maximum width 200 mm - Minimum width 40 mm - Maximum workpiece height 130 mm - Depth with max Ø to tenon 320 mm: 105 mm - Tenoning carriage speed min / max 0/100 m / min - Min / max profiling speed: 3/15 m / min Tenoning: 1- end cut saw 5.5 hp (4 kW) Saw Ø 400 mm 2- tenoning router Counter bearing 50 x 620 mm Bwjdpfx Anjt R T Hcoujr 15 hp (11.3 kW) Max tool Ø 320 mm Axle stroke 575 mm Automatic splinter guard 3- tenoning router Counter bearing 50 x 620 mm 15 hp (11.3 kW) Max tool Ø 320 mm Axle stroke 575 mm Automatic splinter guard Vertical positioning with continuous axis 4- Digital angular adjustment clamp Profiling: 5-: router to be profiled on the right Shaft 50 x 320 mm 10 hp (7.5 kW) Ø tools 130/240 mm Axle stroke 280 mm Time-delayed anti-shattering intervention during calibration Double direction of rotation Vertical and horizontal positioning with continuous axis 6-: router to be profiled on the right Shaft 50 x 320 mm 10 hp (7.5 kW) Ø tool 130/240 mm Axle stroke 280 mm Vertical and horizontal positioning with continuous axis 7-: router to be profiled on the right Shaft 50 x 320 mm 10 hp (7.5 kW) Ø tool 130/240 mm Vertical and horizontal positioning with continuous axis 8-: close-out recovery group Vertical and horizontal positioning with continuous axis Device for extracting the shutter 9-: lower horizontal shaft for groove Vertical and horizontal positioning with continuous axis 88.5 hp (66.4kW) 10-: digital guide 11-: Return of parts to the operator NO TOOLS AVAILABLE OBTAIN ADDITIONAL PHOTOS NOTE: SUBJECT TO CHANGES IN TECHNICAL DATA

Year of construction: 2007, condition: ready for operation (used), functionality: fully functional, workpiece length (max.): 3,200 mm, workpiece width (max.): 200 mm, workpiece height (max.): 130 mm, TECHNICAL DETAILS Bwedpfx Asxx Un Ronujr Workpiece Dimensions Max. workpiece length: 3,200 mm Min. workpiece length: 200 mm Max. workpiece thickness: 130 mm Min. workpiece thickness: 30 mm Max. workpiece width: 200 mm Min. workpiece width: 30 mm Tenoning Carriage Tenon length at max. tenoning diameter: 320 mm Tenoning carriage speed: 0 - 40 m/min Profiling speed: 4 - 20 m/min Table height for profiling: 850 mm Feed roller diameter: 100 mm Distance between feed rollers: 150 mm Crosscut Saw Motor power: 4 kW Speed: 3,000 rpm Spindle diameter: 40 mm Max. tool diameter: 400 mm Milling Unit for Tenoning High-performance spindle with upper bearing: Diameter 50 mm, length 620 mm Motor power: 7.5 kW Speed: 3,500 rpm Max. tool diameter: 320 mm Axis travel below work table: 575 mm Milling Unit for Profiling Spindle: 50 x 320 mm Motor power: 7.5 kW Speed: 6,000 rpm Min./max. tool diameter: 130 - 250 mm Spindle Speed: 1,000 - 12,000 rpm Max. motor power: 11 kW Max. tool diameter: 230 mm Tool positions: 24 Max. weight per tool: 10 kg EQUIPMENT Automatic chip protection Jolly Automatic brake RAPID 24 automatic tool changer Fast vertical adjustment via brushless motors Water cooling for electrospindle Vector rotary axis for 360° electrospindle rotation Note: Further technical details can be found in the attached document!

Condition: ready for operation (used), Year of construction: 2000, CNC Wood Machining Centre manufactured in 2000. This SCM Windor 60 features multiple vertical profiling spindles and an integrated drilling unit, designed for complex wood profiling and drilling operations. It includes a dedicated window profile machining setup and a multi-station tooling arrangement. If you are looking to get high-quality wood machining capabilities, consider the SCM Windor 60 machine we have for sale. Contact us for further details. • Technical Configuration: Bjdpfx Asy S A Stenuswr • Angular window machining centre • Multiple vertical profiling spindles • Integrated drilling unit • Multi-tool profiling configuration • Freud tooling system installed • Left and right vertical spindle groups • Dedicated window profile machining setup • Complex wood profiling and drilling operations • Multi-station tooling arrangement

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, type of input current: three-phase, A Great machine for the most efficient and efficient production of windows and doors. Bedpfxjzif Eus Anuowr

Condition: as good as new (ex-display), Year of construction: 2023, functionality: fully functional, grinding width: 1,350 mm, SCM Wide Belt Calibration and Fine Sanding Machine Model: dmc sd 60 RCS 135 Technical Specifications: Bedpjtwqn Sofx Anujwr Working width: 1,100 mm Min./max. working height: 4–170 mm Abrasive belt width: 1,120 mm Abrasive belt length: 2,150 mm Main motor power: 11 (15) kW (HP) Gear motor: 0.45/0.8 (0.6/1.1) kW (HP) Feed speed: 4.5/9 m/min Standard equipment: - R140/85 rubber-coated calibration roller, diameter 140 mm, 85 Shore - 1st position - R160/45 rubber-coated sanding roller, diameter 160 mm, 45 Shore - 2nd position - Hard sanding pad with manual working height adjustment - Motor power for unit 1: 11 kW (15 HP) - Electronic ammeter for main motor indicating current draw - Electronic work height display - Electronically controlled sanding belt oscillation - Rubber pressure rollers - Anti-kickback device at infeed before first unit - 60 Shore rubber feed belt - Roller table with two rollers at infeed and outfeed of working table - Feed belt with two speeds 4.5 / 9 m/min driven by gear motor - Automatic belt centering Including the following special accessories: 1 pc. version "B" for RCS with: pneumatic on/off for roller 1st unit “R” + pneumatic on/off for roller 2nd unit “CS” + “MESAR” elastic segmented sanding pad + pneumatic on/off for sanding pad unit + electronic programming unit “LOGIC 50” + electronic working height adjustment 1 pc. CE safety standards 1 pc. roller table at infeed and outfeed for long workpieces, equipped with 5 non-driven rollers 1 pc. "RA" diagonally grooved steel contact roller, 1st unit 1 pc. main motor 15 kW 1 pc. abrasive belt wear optimizer 1 pc. LED interior lighting 1 pc. door with viewing window on rear side 1 pc. Logic SC control

Condition: new, Year of construction: 2026, Tenoning spindle 1 0 Number of milling agregates 3 St. Spindle diameter HSK, 50 mm mm control Maestro active windoor Bedpfx Aney T R S Rsuowr

Condition: new, Wide belt sanding machine for calibrating and fine sanding Working width mm 1,100 Min/ Max. working height mm 4/ 170 Sanding belt width mm 1,115 Sanding belt length mm 2,150 Gear motor kW 2.2 Feed speed m/min variable Infeed and outfeed support rollers for long and short workpieces Oscillating belt cleaning 1st unit Bjdpfxoitvkuo Anuewr Oscillating belt cleaning 2nd unit Oscillating belt cleaning 3rd aggregate 10” touch screen control panel “eye-S” 1. Aggregate steel roller 2. Aggregate rubberized calibrating roller 85SH 3. Aggregate combi-aggregate pneumatic seg. sanding pad /rubberized sanding roller 35 SH Motore power 1st unit kW 18.5 Motor powert 2nd & 3rd aggregate kW 18.5 Version "B" for RRCS with: Pneumatic switching on and off 1st aggregate Pneumatic switching on and off 2nd aggregate Pneumatic switching on and off 3rd aggregate "MESAR" with elastic segmented sanding pad Pneumatic switching on and off of the sanding pad unit electronic adjustment of the working height SPECIAL PRICE! IMMEDIATELY AVAILABLE

Year of construction: 2014, condition: like new (used), "EASY PLUS" electronic control from the control panel 2 axes: Bwsdpfoh Nvt Uex Anuer - Automatic control of the left spindle vertical and horizontal position of the upper spindle. - Selection of the feed speed. - 7 "color LCD display Min.working width (finished size) 25 mm Working width (finished size) 230 mm Min.working height (finished size) 6 mm Working height (finished size) 120 mm Min. Length of a single element 450 mm Variable feed speed controlled by an inverter 5 - 25 m / min Pneumatic pressure of the feed shafts Top feed shaft in front of the planer 3kW feed motor power 5.5 kW planer motor power Vertical spindle motor power (single) 11kW Power of the upper horizontal spindle motor 9kW Spindle speed 6000 rpm. Spindle diameter 40 mm Length of the vertical spindles 140 mm Length of the horizontal spindles 250 mm Axial adjustment of the vertical spindles relative to the 40 mm worktable Axial adjustment of the horizontal spindles in relation to the right ruler of 40 mm Min./max. tool diameter on the planer 120 - 140 mm Min./max. tool diameter on vertical spindles 100 - 180 mm Max. Profile on the vertical spindle 40 mm Min./max. tool diameter on the upper spindle 125 (100-180) mm Feed shaft diameter 140 mm Length of the feeding table 2000 mm Quick adjustment of the table at the entrance and 10 mm ruler Manual pump for greasing the STD table

Condition: like new (used), Year of construction: 2025, functionality: fully functional, Spindle configuration 1st spindle: Planing spindle – 4 kW 2nd spindle: Right vertical spindle – 5.5 kW 3rd spindle: Left vertical spindle – 5.5 kW 4th spindle: Top horizontal spindle – 4 kW 5th spindle: Bottom horizontal spindle – 4 kW 6th spindle: Universal spindle – 4 kW Spindle speed: 6,000 rpm Spindle diameter: 40 mm Working area Working width: 25–230 mm Working height: 10–120 mm Min. workpiece length: 450 / 630 mm (depending on version) Feed Infinitely variable: 5–25 m/min Feed rollers Ø 140 mm Infeed table 2,000 mm Tooling ranges Vertical spindles: 100–180 mm Horizontal spindles: up to 180 mm Max. profiling depth, vertical: 40 mm Features Manual table and central lubrication Bjdpfjyym Nrox Anujwr Robust industrial design, smooth operation and high precision

Condition: used, Year of construction: 2012, operating hours: 9,974 h, total height: 2,700 mm, total length: 7,700 mm, total width: 2,420 mm, Empty weight: 7.390 kg CNC machining centre SCM Morbidelli M-600 5-axis machine Year of construction 2012 Machine no. AA2/002032 Working distance X-axis 5020 mm Working distance Y-axis 1680 mm Working distance Z-axis 250 mm Tool positions 36 Bwsdpswnhccofx Anusr Vertical drilling spindles 24  Software SCM XILOG MAESTRO SCM PRISMA K SCM TTS system Milling spindle liquid-cooled SCM TecPad MORBIDELLI TV Matic SCM PRO-SPACE SCM RAPID 12 SCM RAPID 24 Including vacuum pump Capacity 250 m3/h Disassembled for transport Weight 7450kg - Details: - └ Description: Machine gives malfunction spindle - Year: 2012 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: AA2/002032 - Operating hours: 9974 - Number of milling spindles [pcs.]: 1 - └ Milling spindle 1: - - Number of controlled axes [pcs.]: 5 - Type milling table: Beam table - Drilling unit present: Yes - └ Horizontal drill spindles [pcs.]: 6 - └ Vertical drilling spindles [pcs.]: 24 - Saw unit present: Yes - Tool changer positions [pcs.]: 36 - System/software: SCM Maestro - Vacuum pump present: Yes - └ Number [pcs.]: 1 - └ Brand: Becker - └ Capacity [m³/h]: 250 - CNC options: Offcut conveyor - Working range X [mm]: 5020 - Working range Y [mm]: 1680 - Z-axis working range [mm]: 250 - Transport dimensions: 7700mm x 2420mm x 2700mm (l x w x h) - Transport weight [kg]: 7390kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Glenn Smeets

Condition: ready for operation (used), Year of construction: 2017, Edgebander manufactured in 2017. This SCM Olimpic K360 T-ER1 features a feed speed of 11 m/min and accommodates edge thicknesses from 0.4 to 6 mm. It includes a pre-milling unit with counter-rotating diamond heads, an EVA glue unit, and a buffing unit. If you are looking to get high-quality edge banding capabilities, consider the SCM Olimpic K360 T-ER1 machine we have for sale. Contact us for further details. • Feed speed: 11 m/min • Edge thickness: 0.4–6 mm • Panel thickness: 8–60 mm • Min. workpiece: 140 x 90 mm • Power supply: 400 V / 3~ / 50 Hz, 23 AAggregates: • Pre-milling: 2 counter-rotating diamond heads (up to 3 mm removal) • EVA glue unit • Pressure zone with driven roller + 2 pressure rollers • End-cutting unit K-2 (straight/bevel, automatic switching) • Top/bottom trimming: flush, radius, chamfer • Corner rounding R1/R2 • Profile and flat scrapers • Buffing unit Bjdpfxjzmgvis Anuowr • Anti-adhesive fluid system (2 fluids) • Edge roll feeder

Condition: used, Second-hand machine Features and technical specifications: - heavy-duty cast iron construction - Motor: 5.5 kW - Spindle diameter: 30 mm - 2900–4400–6000–7800–10,000 rpm Bedpfx Anszk N R Dsuswr - Height and swivel adjustment: electrically driven - Fine adjustment: via handwheel - with Panhans metal stop jaws - with Holz-Her 3-roller feed mechanism Availability: at short notice Storage location: 63934 Röllbach

Condition: used, Year of construction: 2006, functionality: fully functional, input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, cutting height (max.): 360 mm, cutting width (max.): 580 mm, Equipment: CE marking, documentation/manual, – CE certificate – Operating manual – Italian production – Year of manufacture: 2006 TECHNICAL PARAMETERS: – Diameter of guide wheels: Ø 600 mm – Cutting height: max. 360 mm – Cutting width: max. 580 mm – Table dimensions (L/W): 800 x 585 mm – Saw table tilt: 0° - 20° Bjdpjy El U Djfx Anuowr – Minimum blade/bandsaw length: 4480 mm – Minimum blade/bandsaw width: 10 mm – Maximum blade/bandsaw length: 4580 mm – Maximum blade/bandsaw width: 35 mm – Flywheel speed: 715 rpm – Motor power: 2.2 kW / 400 V / 50 Hz – Extraction port diameter: 100 mm – Machine dimensions (L/W/H): 1120 / 800 / 2200 mm – Weight: ~300 kg

Condition: ready for operation (used), Year of construction: 2019, Edgebander manufactured in 2019. This SCM Olimpic K 560 features a feed speed of up to 18 m/min and is equipped with a 7" color touchscreen control for easy operation. It includes a 2-motor Round X rounding group for corner rounding and trimming, along with various optional groups for enhanced functionality. If you are looking to get high-quality edge banding capabilities, consider the SCM Olimpic K 560 machine we have for sale. Contact us for further details. Key features • Feed speed up to 18 m/min with 600 mm panel spacing, even with corner rounding • Touch 7 color touchscreen control with graphics, program management, diagnostics, and digital glue temperature control • 2-motor Round X corner rounding group for corner rounding and trimmingTechnical specifications • Feed speed: 12–18 m/min Bedpfxszgcl Te Anuswr • Workpiece thickness: 8–60 mm • Edge thickness (roll): 0.4–3 mm • Edge thickness (strip): 0.4–6 mm • Max edge cross-section (roll): 135 mm² • Max roll diameter: 800 mm • Edge overhang: 2 mm top / 2 mm bottom • Workpiece spacing: 600 mm • Min workpiece length: 140 mm • Min workpiece width: 95 mm (60 mm with special setting) • Minimum length (roll material): 180 mm • Minimum length (strip material): 220 mm • Opening of workpiece pressure bar: 560 mm • Working height: 900 mmControl system (Touch 7) • 7" color touchscreen (16:9) • Graphical display and simulation of all units • Control of all units and automatic start functions • 60 freely editable programs • Full PLC control with encoder monitoring • Digital glue pot temperature control • Diagnostics with operator assistance • Statistics: piece counts, edge meters, chain runtime • Pass selection: first or second processing passProcessing units • Joining milling: two diamond jointing cutters, 1.8 kW each, 12,000 rpm • Glue unit VC-S4.1: 3 kW heating, 1.5 kg tank, Fastlock quick-change, motorized main + three pressure rollers • Trimming unit K/SEL: two HF motors 0.35 kW each, 12,000 rpm, swivel 0–15° • Flush milling unit R-K: two HF motors 0.55 kW each, 12,000 rpm, tool radius R2 • Round X corner rounding: two HF motors 0.35 kW each, 12,000 rpm, backlash-free precision guides • Scraper unit RAS-K: tool radius R2 • Polishing unit SP-V: two motors 0.18 kW each, 3,000 rpm Additional equipment • Autoset T-ER2 automatic changeover: • Switching between first and second passes • Automatic edge thickness change (e.g., 0.4 mm to 2 mm) • Release agent/anti-adhesive spray system AAR • Glue scraper unit RC-V • H=64 mm diamond tools for rectifying/pre-milling group

Condition: used, Year of construction: 2017, total height: 1,800 mm, total length: 4,800 mm, total width: 1,000 mm, Colour: Grey Price: On request - Details: Bwodoyll Snopfx Anuor - └ Description: Machine is currently giving fault, error code empty machine - Year: 2017 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Number of units [pcs]: 9 - └ 1st unit type: Pre-milling unit - - Tools available: Yes - └ 2nd unit type: Glue unit - └ 3rd unit type: Pressure rollers - - Tools available: Yes - └ 4th unit type: Cap unit - - Tools available: Yes - └ 5th unit type: Corner rounding unit - - Tools available: Yes - └ 6th unit type: Radius scraping unit - - Tools available: Yes - └ 7th unit type: Corner rounding unit - - Tools available: Yes - └ 8th unit type: Flat scraping unit - - Tools available: Yes - └ 9th unit type: Brushing unit - - Tools available: Yes - Glue system: Glue pot - Voltage [V]: 400 - Current consumption [A]: 42 - Transport dimensions: 4800mm x 1000mm x 1800mm (l x w x h) Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Year of construction: 2015, machine/vehicle number: MR007049, Used: SCM edge banding machine, in very good condition. Complete machine, ready for immediate use. Used: Edge banding machine, manufactured by SCM – model Olimpic K360 T-ER13 Equipped with the following options: - Machine complies with European CE standards - Anti-adhesion spray unit AAR - Glue scraper unit RC-V - Brush unit SP-V - Touch 7 control – 7'' touchscreen control (including the ability to store up to 60 programs) - AUTOSET for T-ER1 3 positions for R-K flush-trimming unit 2 positions for round-over unit pneumatic on/off switching of the glue scraper unit - Nesting sensors for the machining units The machine is equipped with the following units: – Pre-milling unit with 2 motors – with compressed air cleaning after milling – Spray unit, sprays after pre-milling, to prevent adhesion of the glue to the surface. – Glue unit, with dual temperature setting for selecting, for example, PU and EVA glue. – Trimming unit for cutting off the edge band. – Milling unit with solid guide rollers, for a perfect milling operation along the surface. – Round-over unit, for milling rounded edges or bevels. – Radius scraper unit for a perfectly smooth finish (R=2). – Spray unit, for dissolving the glue and applying a sheen. Bjdpfxozgwzve Anuowr – Glue scraper unit, for removing glue residues on the surface. – Brush unit for polishing the glued edge. Technical specifications: - Min./max. band thickness: 0.3-3 mm - Feed speeds: 11 m/min - Minimum panel thickness: 8 mm - Maximum panel thickness: 50 mm - Weight: 1433 kg - Serial number: AH/118707

Condition: good (used), Year of construction: 2017, NUMERICALLY CONTROLLED EDGE BANDER WITH PRE-MILLING (SPINDLES) & CORNER ROUNDING UNIT Brand: SCM Model: K 360 HP-T-ER1 Serial No.: AH/120944 Ref: 123304 Year: 2017 WORKING CAPACITIES: - Panel height to be machined: 8 - 58 mm Thickness 10 to 45 mm when using rounding unit - Panel length for edgebanding: 210 to 2500 mm - Minimum panel width to be machined: 90 to 1100 mm - Edge thickness in coil: 0.4 to 3 mm without rounding max 3 mm with rounding unit - Edge thickness in strips: max 6 mm without rounding max 3 mm with rounding unit - Edge width: panel thickness + 2 mm each side - Feed rate: 11 m/min - Minimum gap between panels: 600 mm - Panel overhang beyond the transfer chain: 30 mm MACHINE CONFIGURATION: - StarTouch control - Prepared for barcode reader - Reel holder table Ø800 mm - Front extension table - Easy size: digital positioning of infeed fence and panel passage height - Anti-adhesive spray unit - Pre-milling unit (RT-V trimmer) 12,000 RPM - Infrared panel preheating at infeed - Glue application unit (VC-VM) with interchangeable glue pot Bsdpfxorx S Ips Anuewr for granules, capacity: 1 kg. Heating time: 12 minutes Pneumatic pre-cut guillotine Digitally positioned pressure station with 3 rollers (1 roller powered and with timer) - Trimming unit (end cutting) tiltable 0-20° 12,000 RPM - Top/bottom flush trimming unit with digital positioning and copying system. 2 mm radius (or chamfer) router 12,000 RPM - Corner rounding unit R2 mm, 12,000 RPM, digital positioning - Top/bottom R1 & R2 mm radius scrapers with digital positioning - Top/bottom straight scrapers - Edge finishing spray device (Nebulizer) OTHER FEATURES: - Pre-milling group motors: 2x2 kW - End trimming motors: 2x 0.19 kW - Lift/lower motor: 0.30 kW - Feed motor: 1.1 kW - Flush trimming group motors (milling): 2x 0.65 kW - CE Marked - Lockable isolator, emergency stop buttons - Power supply: 380 V, three-phase, 50 Hz - Pneumatic supply: 8-10 bar max, dry air - Extraction: 1x Ø100 mm and 5x Ø80 mm Spindles: 780 m³/h Edge trimming: 360 m³/h Scrapers: 2x360 m³/h Max. footprint in working order: 10.80 x 2.40 m Dimensions for transport (LxWxH): 4.85 x 1.20 x 1.70 m Weight: 1568 kg Machine supplied with mounted tools, manual, spare parts list and diagrams.

Condition: excellent (used), Year of construction: 2015, operating hours: 3,240 h, functionality: fully functional, machine/vehicle number: S600RCS110, total width: 1,600 mm, total height: 2,050 mm, total length: 2,700 mm, working width: 1,200 mm, grinding width: 1,200 mm, workpiece weight (max.): 1 kg, overall weight: 1,400 kg, grinding height: 170 mm, power: 8.83 kW (12.01 HP), height adjustment type: electric, type of input current: three-phase, compressed air connection: 6 bar, grinding belt width: 1,115 mm, table length: 2,680 mm, table width: 1,230 mm, Equipment: 3rd hydraulic function, fully functional “Sandingmaster” machine from SCM, currently in operation. Additionally available are original, unopened EKAMANT sanding belts of various grits, which can only be used with this belt sanding machine. Bwsdpfezm Slijx Anuor

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, grinding belt length: 2,150 mm, input current: 39 A, Wide belt sander SCM suitable for calibration/sanding of solid wood, veneer and lacquer base. Model: Sandya 600 RCS Working width: 1.100 mm Working thickness: 4-170 mm Bwsdsygddlspfx Anujr Main motor: 15 kW (invertor) Abbrasive belts speed: 3-16 m/s (inverter) Feeding speed: 3-18 m/min (inverter) Abbrasive belts length: 2.150 mm Aggregates: 1. Steel calibrating roller R (diam. 140 mm) 2. Combinated unit CS: - rubber coated roller (diam. 160 mm, hardness 30Sh) - elektronic sectional pad (segments width 30 mm) 3. Sanding brush ScotchBrite (diam. 150 mm) Other equipment: - 5 idle supporting rollers at infeed - 5 supporting rollersat outfeed (1st roller motorized) - version C-Plus - pneumatic exclusion of the 1st roller - pneumatic exclusion of the 2nd roller and the pad - electronic programmator LOGIC TS with LCD touch screen 10,4" - motorized height adjustment Stat of the machine: very good Production year: 2016 Weight: 1.400 kg El. power: In=39A Machine availability: cca April 2026

Condition: excellent (used), SCM K560 HP Edge Bander Liquids Pre-milling cutters, Roller glue application, Replaceable tank Features a glue drain Pneumatic pre-trimming guillotine, Liquids Finished edge trimming knives Top-and-bottom milling unit (multi-cutter R1-R2), Corner rounding unit, Profile edge trimming cutter (multi R1-R2), Liquids Flat edge trimming cutter, Polishing unit The machine has CNC control Max. workpiece height 60mm Max. veneer thickness in roll 3mm, Feed rate 12 and 18 m/min Bwjdpjzlta Sofx Anuer Inspection and testing possible on-site

Condition: excellent (used), SCM K360 Edge Bander Liquids Bwodpszldikjfx Anujr Preliminary cutters, Roller glue application, Replaceable tank Second tank included Pneumatic preliminary guillotine, Trimming heads with optional corner rounding Pneumatically adjustable R1-R2 top-bottom milling unit, pneumatically adjustable Profile edge trimmer, pneumatically engaged Straight edge trimmer, Max. element height 60mm Max. veneer thickness in roll 3mm, Feed speed 11m/min Original mileage 48,000m Very good condition Can be inspected and tested on site

Condition: new, Clean air extraction / dust extractor Dust-tested to H3, residual dust content less than 0.1 mg/m³ Suitable for extracting and separating dry wood and plastic chips High extraction performance with low space requirement Maximum performance in this class Very quiet Designed for commercial use Robust and compact housing made of galvanized sheet steel Extraction nozzle can be easily converted from left to right for flexible use Large inspection openings Large, mobile chip container with clamping bracket and chip collection bag Dust extractor already fully assembled on delivery, so can be used quickly All models are mobile Polyester fleece filter material, aluminized, therefore with long service life Antistatic filter tested and approved to category M-BIA as standard The fan is connected downstream of the filter Efficiency class extraction motor IE3 Nominal volume flow 1448 m³/h Nominal negative pressure 2242 Pa Power drive motor 2.2 kW, 400 V, 50 Hz Chip collection volume 2 x 165 l Nominal width of external suction connection inlet 160 mm Filter area 9.21 m² Residual dust content < 0.1 mg/m³ Sound pressure level max. 73 dB(A) Bwsdpfor A Eq Rsx Anusr L x W x H approx. = 1618 x 830 x 1653 mm Weight approx. 268 kg VERSION PM Automatic filter cleaning with pneumatic system that moves a scraper frame

Condition: used, Year of construction: 2020, functionality: fully functional, Edgebander SCM K560HP - year 2020. FULL SERVO DRIVES. Serviced by authorized SCM service. Fully functional, currently in operation. Scheduled dismantling of the machine: January/February 2026. Full description of functions in the attached photos. Inspection and testing on site possible. Bedpfx Anexn T Sgjujwr

Condition: like new (used), Year of construction: 2015, spindle diameter: 30 mm, pivoting range: 130 °, actuation type: electric, rotational speed (max.): 3,000 rpm, rotational speed (min.): 10,000 rpm, total length: 1,000 mm, total width: 1,000 mm, total height: 1,200 mm, Equipment: CE marking, documentation/manual, SCM Formula T60I Undercut Spindle Moulder | Spindle Tilt | 2015 – LIKE NEW! SCM Formula T60I Undercut Spindle Moulder | Spindle Tilt | 2015. For sale: a professional SCM Formula T60I undercut spindle moulder from the renowned Italian manufacturer, SCM Group. This machine, manufactured in 2015, is designed for demanding carpentry and production applications. Its robust construction, weighing 624 kg, ensures stable operation and high machining accuracy. TECHNICAL SPECIFICATIONS: - Spindle tilt from 90° to 135° - Smooth spindle speed adjustment from 3,000 to 10,000 rpm - Powerful 5.5 kW motor - Solid cast iron worktable - Professional design for continuous operation - Precise adjustment settings - Machine ready for operation Bwedpfxszp Hx No Anuer - Machine tested (video of the machine in operation available on TikTok and YouTube – jbsmaszyny) Technical data: Manufacturer: SCM Group Model: Formula T60I Year of manufacture: 2015 Power supply: 400 V Motor power: 5.5 kW Spindle speed: 3,000 – 10,000 rpm Spindle tilt: 90° – 135° Weight: 624 kg You can test the machine on-site. Financing options available through leasing or installments. WE ORGANIZE TRANSPORT. WHERE CAN YOU SEE OUR MACHINES? JBS STOLARSKIE MACHINES WOLICA DRUGA 26 23-310 MODLIBORZYCE jbsmaszyny.pl

Condition: ready for operation (used), Year of construction: 2012, machine/vehicle number: AA2-002032, functionality: fully functional, operating hours: 9,974 h, overall weight: 7,450 kg, feed length X-axis: 5,020 mm, feed length Y-axis: 1,680 mm, feed length Z-axis: 250 mm, TECHNICAL DETAILS X-axis travel: 5,020 mm Y-axis travel: 1,680 mm Z-axis travel: 250 mm Number of axes: 5 Software: SCM XILOG MAESTRO Control systems: SCM PRISMA K, SCM TTS System, SCM TecPad, MORBIDELLI TV Matic, SCM PRO-SPACE, SCM RAPID 12, SCM RAPID 24 Tool changer: 36 positions Drilling units: 24 x vertical MACHINE DETAILS Machine dimensions (LxWxH): 2,400 x 8,000 x 2,400 mm Bwsdsy Akgajpfx Anusr Total weight: 7,450 kg EQUIPMENT - Vacuum pump with 250 m³/h capacity - Liquid-cooled milling spindle