Used Scm Si 12 B for sale (634)

Condition: new, Year of construction: 2025, FS 41 classic Tersa – Jointer-planer with TERSA quick-change cutterhead system With TERSA cutterhead for ultra-fast cutter blade changes TERSA cutterhead system enables particularly quiet operation Helically toothed steel infeed roller for consistent and uniform wood feed The particularly long, one-piece jointer tables allow for easy planing of workpieces Large jointer fence can remain in its position when the jointer tables are opened Rear-opening jointer tables The high machine weight ensures maximum precision and smooth operation Powerful industrial motor Robust steel/cast iron construction Model: FS 41 Classic Tersa Item No.: 5503414 Technical data ---Technical data, jointer--- Total length of tables: 1800 mm Feed table length: 920 mm Table height: 870 mm Working width: 410 mm Max. chip removal: 4 mm ---Technical data, planer--- Dimensions of planer table: 605 x 420 mm Min./max. working height: 3 / 230 mm Feed speeds: 7 m/min Cutterhead diameter/cutter blades: 72 mm / 3 pcs. Speed: 5200 rpm Motor 400V/50Hz/S6 40%: 5.0 kW (6.6 hp) Dust extraction port diameter: 2 x 120 mm Weight: 270 kg Tersa cutterhead No more adjusting and screwing Cutter blade changes in seconds Self-locking Lrsdpocnxaysfx Apmop Particularly quiet Planing unit Massive anti-kickback devices prevent workpiece kickback 3-blade Tersa cutterhead for optimal planing result Wood feed Helically toothed steel infeed rollers for a constant and uniform wood feed without marks 13 teeth engage simultaneously for powerful feed Wear-free compared to rubber infeed rollers Dust extraction hose connection The dust extraction ports of the jointer (1) and planer (2) point in the same direction The hose connection is made from only one side No hose is needed that extends around the machine

Condition: new, Year of construction: 2025, Dimensions and Weights Length approx. 2000 mm Width/Depth approx. 1110 mm Weight approx. 430 kg Jointer Feed table length 1034 mm Maximum chip removal 5 mm Dust extraction connection Dust extraction port diameter Thickness 2 x 120 mm Thickness Minimum working height 3 mm Maximum working height 230 mm Maximum chip removal 5 mm Electrical Data Power of drive motor 5 kW Connection voltage 400 V Mains frequency 50 Hz Planer cutterhead Type TERSA Number of planer cutters 4 pcs Lodpfx Ashkz E Tepmsrp Speed 5200 min⁻¹ Maximum planing width 410 mm Feed Speed 6 / 12 m/min The TERSA planer cutter system enables particularly quiet operation. Helically toothed steel feed roller for consistent and uniform material feed Material feed with two speeds Numerical display for thickness table height The 2,000 mm long jointer tables facilitate easy adjustment of large workpieces. Work tables are made of gray cast iron, annealed and stress-relieved, making them durable and dimensionally stable Stable, large aluminum jointer fence with round bar guide (1200 x 160 mm) Thickness table adjustment via handwheel with numerical display for planing height The high machine weight ensures maximum precision and smooth operation. Powerful industrial motor Robust steel/gray cast iron construction Equipment details Jointer fence Stable, large aluminum jointer fence (1200 x 160 mm) With precise round bar guide Dust extraction hose connection The dust extraction ports for the jointer and thicknesser point in the same direction during jointing and planing. Therefore, the dust extraction hose can be connected to the machine from the same side for both types of planing. You do not need a hose that runs around the machine. Planing unit Helically toothed steel feed rollers for consistent and uniform material feed Solid anti-kickback devices prevent workpieces from being thrown back 4-cutter shaft ensures an optimal planing result Chain drive Sturdy chain drive Drive gears made of steel Solid gray cast iron bearing block Two feed speeds Standard with two feed speeds Comfortably selectable from the operator panel Material feed Helically toothed steel feed rollers for a consistent and uniform material feed without marks Several teeth engage simultaneously for powerful feed Wear-free compared to rubber feed rollers Thickness table adjustment Adjustment via handwheel Numerical display for the set planing height Accuracy 1/10 mm Tersa planer cutterhead No more adjustment and screwing required Planer cutter change in seconds Self-locking Particularly quiet Perfect planing result Location: In stock, 54634 Bitburg - immediately available - Subject to prior sale

Condition: new, Year of construction: 2026, LAB 300 PLUS F 16 TERSA - Universal combination machine with aluminum sliding table and three milling speeds for sawing, milling, planing/thicknessing, and optional mortising torsion-resistant steel cast iron construction machine table made of cast iron, hardened and ground easy-running, anodized aluminum sliding table, 10-year warranty on wear of guide rails large fence system with extendable aluminum telescope fence and folding stops with combination saw fence with 45° quick adjustment max. saw blade diameter 315 mm with optional scoring unit, pivotable from 90°-45° helical steel feed roller for consistent wood feed during thicknessing four milling speeds, manually adjustable standard with right/left rotation of the milling spindle three independent motors for each working unit Scope of delivery: Combination fence/parallel fence Arc milling guard Tersa cutterhead Anodized aluminum sliding table Aluminum fence cheeks Folding stops Eccentric clamping arm Model LAB 300 PLUS F 16 Tersa Item No. 5500314 Technical data ---Technical data circular saw--- Fence length 1600 mm max. saw blade diameter with scoring 315 mm max. cutting height at 90° / 45° 100/79 mm max. ripping width to the left of the saw blade 1660 mm Cutting width on the parallel fence 800 mm Saw arbor speed 3500 rpm Saw blade inclination 90° - 45° ---Technical data planer--- Working width 300 mm Planer table length 1260 mm Cutterhead speed Cutterhead diameter / number of planer knives 72 mm / 3 pcs ---Technical data thicknesser--- Table dimensions 300 x 450 mm min. / max. working height 3 mm / 220 mm max. chip removal 4 mm Feed rate 7 m/min ---Technical data table saw--- Usable spindle length 100 mm max. tool diameter 180 mm, can be recessed max. tenon tool diameter 275 mm max. tool diameter, can be recessed 140 mm Spindle speed 3500/600/800 rpm Spindle diameter 30 mm Lredpecnxa Nefx Apmep Motor power 400 V / 50 Hz / S6 - 40% 4 kW (5.5 hp) S6 40% Weight 430 kg Dust extraction port diameter 4 x 120 mm Dust extraction port diameter saw blade guard 60 mm Sliding table with ball bearing system equipped with a proven ball bearing system permanently easy-running thanks to hardened and ground guides not susceptible to dust and dirt due to minimal contact point between the ball and the trapezoidal rail 10-year HolzKraft warranty on wear of the carbide guide rails Dust extraction hose connection The dust extraction ports of the planer (1) and thicknesser (2) point in the same direction. The dust extraction hose can therefore be connected to the machine from the same side for both types of planing. You do not need a hose that goes around the machine. Planing units helical steel feed rollers for a constant and even wood feed massive anti-kickback devices prevent the workpiece from kicking back 3-knife cutterhead ensures an optimal planing result

Condition: new, Year of construction: 2026, Combination saw-milling machine minimax st 3c F 16 Swiveling saw blade, swiveling milling spindle, and format sliding table made of anodized aluminum Stable steel cast iron construction Large support surface and precise cast iron table High-precision format sliding table made of anodized aluminum (travel 2250 mm) Large rip fence frame (900 x 600 mm) with an extendable aluminum telescope stop up to 2660 mm, featuring professional stop flaps Max. saw blade diameter 315 mm with scoring device, swiveling from 90° to 45° Saw parallel fence with fine adjustment Stable saw unit and large dimensioned double-bearing milling unit ensure maximum stability, precision, smooth running, and long service life Solid and precise machine table made of stress-free cast iron Three milling speeds, manually adjustable from 3500 - 10000 min⁻¹ With right-hand/left-hand rotation of the milling spindle Standard arc milling guard Safety flip stop jaws made of aluminum Two motors with high power reserves Two plug-in handwheels for convenient and quick operation Dimensions and weights Weight approx. 470 kg Dust extraction connection Dust extraction port diameter 2 x 120 mm Dust extraction port diameter saw blade guard 60 mm Electrical data Power of drive motor 2 x 5.0 kW Connection voltage 400 V Mains frequency 50 Hz Milling spindle Spindle inclination 0 – -45 ° Usable length of the spindle 100 mm Spindle speeds 3500/7000/10000 min⁻¹ Milling tool diameter max. non-tilting 210 mm tilting 180 mm dovetail milling 275 mm Circular saw unit Rip fence length 1600 mm Cutting width with parallel fence 900 mm Max. crosscut width to the left of the saw blade 2660 mm Saw blade inclination 90 45 ° Max. cutting height 90° 90 mm Max. cutting height 45° 63 mm Max. saw blade overhang 90° 100 mm Max. saw blade overhang 45° 78 mm Diameter (main) saw blade 315 mm Explanation diameter (main) saw blade: independent of the scoring saw Speed (main) saw blade 4000 min⁻¹ Sliding table and table Table length 1112 mm Table width 430 mm Scope of supply: Arc milling guard Anodized aluminum format sliding table Aluminum stop jaws Flip stops Location: In stock at 54634 Bitburg Lrjdehp Rdlspfx Apmjp - immediately available -

Condition: as good as new (ex-display), Year of construction: 2026, 5222454 LIBRA 45/2 RTC 135 Wide Belt Sander 5257433 "Z" Designation for RTC 135 5257452 Vacuum table with electric fan 3 kW 5257453 Oscillating belt air-blast device for 5257454 Oscillating belt air-blast device for 5257462 Reinforced motor 15 kW (20 HP) 5257485 Roller table at infeed and outfeed for 5257499 Grooved rubber pressure roller, 2nd position 5257500 Grooved rubber pressure roller, 3rd position 5257504 Infinitely variable conveyor feed with inverter 5257605 Door with inspection window 5257606 LED lamp for internal illumination TECHNICAL DATA Dimensions and Weights Length (product) approx. 1800 mm Width/depth (product) approx. 2000 mm Height (product) approx. 2070 mm Extraction Connection Number of extraction ports: 2 Extraction port diameter: 200 mm Electrical Data Feed motor power: 0.8 kW Connection voltage: 400 V Mains frequency: 50 Hz Height adjustment motor power: 0.25 kW Output power (motor power): 11 kW Sanding Unit Sanding belt length: 2150 mm Sanding belt width: 1370 mm Max. sanding width: 1350 mm Feed Unit Feed speed: 4.5 / 9 m/min Workpiece Lrodpfxoy Ehiwo Apmsp Min. workpiece height: 4 mm Max. workpiece height: 170 mm Product Information EU 2023/2854 Type of generated data: usage data Format of generated data: common, machine-readable formats, e.g., JSON Data volume: up to 5 MB Continuous real-time data generation: yes Data storage location: on the device and a remote server Data access: on the device and via physical and wireless interfaces Location: ex stock 54634 Bitburg - immediately available -

Condition: as good as new (ex-display), Year of construction: 2026, Combination machine, 4-in-1, HOLZKRAFT CU 410c F 26 N Tersa -- Technical data -- - Circular saw - Reach 2,600 mm Max. saw blade diameter 315 mm Max. cutting height at 90°/45° 100 / 79 mm Max. rip width to the left of the saw blade 2,310 mm Cutting width with parallel guide 900 mm Ljdpfed Dtc Tjx Apmerp Saw blade tilt 90° - 45° - Jointer - Working width 410 mm Jointer table length 1,660 mm Cutterhead diameter / number of knives 72 mm / 3 pcs. - Thickness planer - Table dimensions 410 x 605 mm Min./max. working height 3 / 230 mm Max. chip removal 4 mm Feed rate 7 m/min - Table router - Usable length of spindle 100 mm Max. tenoning tool diameter 275 mm Max. tool diameter 210 mm Spindle speed 3,500 / 6,000 / 10,000 rpm Spindle diameter 30 mm - General - Motor power 400 V / 50 Hz, 3 x 5.0 kW (6.6 hp) Dust extraction port diameter 4 x 120 mm Dust extraction port diameter, saw blade guard 60 mm - Special offer price - Location: In stock, 54634 Bitburg

Condition: as good as new (ex-display), Year of construction: 2026, minimax c 26g TERSA – Multi-functional machine for sawing, milling, surfacing, and thickness planing. The worktables made of heavy-duty ribbed cast iron and the base frame made of welded steel guarantee torsional rigidity and vibration-free operation. Unique in this performance class: smooth-running, anodized aluminum format sliding table with ball-contact system. Swiveling saw blade from 90° to 45°. Table extension with aluminum stop for panels and large workpieces. Planer unit with TERSA quick-change system with three planer knives. Helically toothed steel infeed roller for consistent workpiece feed during thickness planing. Arc milling guard for profiling, standard with fine adjustment. Milling unit with two speeds. Three independent motors for each working unit. Quality – Made in Europe. Equipment details Aluminum sliding table With a tried-and-tested ball-contact system Dust and dirt-resistant due to minimal contact point between ball and trapezoidal rail Permanently smooth running Saw unit adjustment Manual height and bevel adjustment of the saw unit via star handle Accurate positioning using a scale TERSA planer knife shaft No more adjusting and screwing Planer knife changes in seconds Self-locking Particularly quiet Table milling machine The milling unit has two speeds for flexible tool use. The machine is equipped with a fine-adjustable arc milling guard for profiling. With the aluminum sliding table, mortise and tenon joints can be easily cut. Thickness planer With the powerful thickness feed, workpieces up to 200 mm high can be planed. The helically toothed infeed roller guarantees consistent feed. The surfacing table can be folded inward to save space. Changing from surfacing to thickness planing is done in seconds with a single movement. Surfacing planer Standard with TERSA planer knife quick-change system Large-sized surfacing tables The surfacing and thickness tables made of cast iron guarantee the highest smoothness and vibration-free operation. Saw unit Saw can be swiveled up to 45° With saw blade 250 mm Ø with max. 80 mm cutting height A width of up to 500 mm can be cut on the parallel fence. Table extension With degree scale and aluminum stop for angled cuts on panels and large workpieces Scope of supply: Tersa quick-change planer knife shaft Anodized aluminum format sliding table Miter fence with a folding stop Multi-function fence for parallel cutting and surfacing Eccentric clamping arm Model: minimax c 26g TERSA Article no.: 5500027 Cutting length: 1200 mm Lrodpedqzh Tsfx Apmop Cutting width with parallel fence: 500 mm Max. crosscut width to the left of the saw blade: 1200 mm Saw blade inclination: 90 - 45 degrees Max. cutting height at 90°: 80 mm Format sliding table length: 1140 mm Format sliding table width: 201 mm Format sliding table height: 70 mm Saw table length: 1024 mm Saw table width: 224 mm Saw table height: 900 mm Planer knife shaft type: TERSA Planer knife shaft diameter: 62 mm Number of planer knives: 3 pcs Surfacing table width: 260 mm Surfacing table length: 1040 mm Swivel angle of saw/surfacing fence: 90/45 degrees Max. material removal during surfacing: 3 mm Thickness table length: 450 mm Thickness table width: 260 mm Min. workpiece thickness: 3 mm Location: In stock 54634 Bitburg - immediately available -

Condition: new, Year of construction: 2026, Holzkraft Minimax ST 5es – Maximum configuration for professionals Saw-milling combination with miter cutting device and pivoting milling spindle Art. No.: 5501086 Ø 350 mm main saw blade with 118 mm max. cutting height, which is also achieved when the scoring saw blade is installed Scoring device with separate motor and Ø 120 mm saw blade, easily and precisely adjustable from the outside Saw unit can be pivoted from 90° to -45° High-precision format sliding table made of anodized aluminum Large extension table (1200 x 650 mm) With material roller and extendable aluminum telescope stop up to 3300 mm Pivoting milling spindle from 90° to -45° towards the rear into the milling fence Four milling speeds With right/left rotation of the milling spindle Three independent motors With lockable main switch, motor protection switch Supplied as standard with separate saw parallel fence and separate jointing fence for planing Equipment details: Sliding table with ball contact system Made of anodized aluminum Ledpfxod Hx Hmo Apmorp Guides made of hardened and ground steel, 15% harder than conventional steel Double-bearing milling unit Pivoting, made of cast iron Mounting points directly on the table, resulting in optimal smoothness Milling spindle mounted high up on precision ball bearings, resulting in low bearing load and maximum possible service life Powerful industrial motors Milling fence Heavy-duty professional design The high-quality milling fence made of cast iron is supplied as standard with fine adjustment 3-way positionable for quick resetting of the setting With fine adjustment via rack and pinion, numerical display and aluminum milling fence jaws Parallel fence With fine adjustment and quick clamping Stable round bar guide made of ground steel Can be conveniently folded down for cutting large workpieces Interchangeable aluminum ruler for narrow workpieces Cast iron double-bearing saw unit Height adjustment via dovetail guide Extremely robust and torsion-resistant for precise cuts Close to the saw blade, bearing on both sides Height and adjustable up to 45° Scoring unit with separate scoring motor 0.55 kW as standard Extension table with angle-adjustable telescope stop with degree grid division Dimensions and weights Weight approx. 900 kg Dust extraction connection Dust extraction nozzle diameter 3 x 120 mm Dust extraction nozzle diameter saw blade guard 80 mm Drive power Scoring motor 0.55 kW Main motor 2 x 5.0 kW Electrical data Connection voltage 400 V Format sliding table and table Format sliding table width 360 mm Format sliding table height 142 mm Table length 1380 mm Table width 465 mm Milling spindle Spindle inclination 0 – -45 ° Usable length of the spindle 125 mm Spindle speeds 3500/6000/8000/10000 min⁻¹ Milling tool diameter max. Lowerable 240 mm Mortise milling 320 mm Circular saw unit and scoring saw Cutting length 3200 mm Cutting width with parallel fence 900 mm Max. ripping width to the left of the saw blade 3300 mm Saw blade inclination 90 - 45 ° Max. cutting height 90° 104 mm Max. cutting height 45° 68 mm Location: In stock, 54634 Bitburg - available immediately -

Condition: new, Year of construction: 2025, Large surfacing tables made of cast iron The surfacing table adjustment is carried out via a precise parallelogram system, so that in every adjustment position the distance between the table tips and the cutter shaft remains the same. The large, stable surfacing fence made of anodized aluminum is easy to move and can be tilted from 0° to 45°. The angle of the fence can be read from the workstation. Comes standard with an auxiliary fence. Large four-knife cutter shaft, precision-mounted. Smooth operation thanks to the precision unit and the heavy cast-iron design. Powerful industrial motor. Maximum user safety with the simplest operation. Indicator for chip removal via a scale. Manual table adjustment. Motor protection switch. Equipment details: Includes a foldable auxiliary fence for narrow workpieces. Manual quick adjustment of chip removal with scale and chuck. The safety device: The safety device is foldable and has been designed so that the operator is not hindered and is simultaneously protected during operation. Models TERSA with Tersa planing cutter shaft system: No more adjusting and screwing. Planer knife change in seconds. Self-locking. Particularly quiet. Perfect planing result. Dimensions and weights: Lsdpfx Aeff Efcopmorp Length approx. 2750 mm Width/Depth approx. 1500 mm Weight approx. 680 kg Surfacing Total length of the tables 2720 mm Infeed table length 1498 mm Chip removal max. 8 mm Fence length 1200 mm Fence height 190 mm Swivel range of the surfacing fence 90 - 45 ° Connection for dust extraction Dust extraction nozzle diameter thickness 120 mm Drive power Main motor 7 kW Installation information Space requirement length 2750 mm Space requirement width/depth 1604 mm Explanation of space requirement: The dimensions take into account maximum travel distances or usable lengths. Electrical data Connection voltage 400 V Phase(s) 3 phases Type of current AC Mains frequency 50 Hz Planing cutter shaft Type TERSA Diameter 120 mm Number of planing knives 4 pcs Speed 5000 min¯¹ Planing width max. 520 mm Location: In stock at 54634 Bitburg - available immediately -

Condition: as good as new (ex-display), Year of construction: 2026, Compact wide-belt sanding machine with combination sanding unit Promotional features: - Switching the sanding pad on and off from the control panel - Switching the roller on and off from the control panel - Electronic control system Fox 500 KTR - Table extension with 2 rollers, with infeed and outfeed - Automatic table positioning with push button Article number: 5222100A2 Also suitable for smaller workshops for occasional use Combination sanding unit with sanding pad for fine sanding Standard equipment includes a diagonally grooved steel roller, Ø 120 mm, for calibrating Fine adjustment of the working height Clear control panel on the front Robust, tubular-reinforced monoblock steel machine body, robot-welded, with work units mounted high up for maximum rigidity Motorized height adjustment of the work table with digital display Electronically controlled sanding belt oscillation Carpet feed via geared motor with two speeds Natural rubber feed carpet with a negative profile Flexible steel pressure bar in front of the first unit Rubber pressure rollers, in front of or behind each work unit Pneumatic belt tensioning per unit with decimal correction option for grit size/belt thickness Universally applicable for solid wood and veneer thanks to the combination unit Entry-level model for smaller companies Working width 950 mm Equipment details: Combination unit for calibrating and sanding Diagonally grooved steel roller, Ø 120 mm, with fine height adjustment Hard sanding pad with graphite pad Lrsdpfx Apsgf Sw Njmjp Universal design for calibrating and sanding solid wood, chipboard and veneer Technical data Length (product) approx. 1388 mm Height (product) approx. 1668 mm Width/Depth (product) approx. 1545 mm Connection for dust extraction Dust extraction nozzle diameter 140 mm Electrical data Connection voltage 400V Current type AC Phase(s) 3Ph Mains frequency 50Hz Power feed motor 0.33 / 0.55 kW Power height adjustment motor 0.25 kW Power drive motor 7.5 kW Sanding unit Sanding belt length 1525 mm Sanding width max. 950 mm Sanding belt width 970 mm Feed unit Feed speed 4.5 / 9 m/min Workpiece Workpiece height min. 4 mm Workpiece height max. 170 mm

Condition: excellent (used), Year of construction: 2021, Sale on behalf of customer. SCM Gabbiani P80 Panel Saw – Year 2021 – 4300 x 4300 mm For sale is a state-of-the-art SCM Gabbiani P80 panel saw, manufactured in 2021 and in excellent condition. The machine was used in an active carpentry workshop and impresses with its precision, speed, and high reliability in daily operations. Technical Specifications: Cutting length: 4300 mm Cutting width: 4300 mm (large version) Cutting height / blade protrusion: 80 mm Main saw blade diameter: Ø 340 – 370 mm Scoring saw blade diameter: Ø 200 mm Main saw blade speed: approx. 4,650 rpm Scoring blade speed: approx. 5,850 rpm Drive & Power: Main motor: approx. 7.5 – 15 kW (depending on configuration) Scoring unit: approx. 1.3 – 1.5 kW Total connected load: approx. 12 – 15 kW Voltage: 400 V / 50 Hz Speeds: Saw carriage: 6 – 60 m/min (stepless) Pusher speed: up to 60 m/min Pneumatics & Extraction: Compressed air requirement: approx. 300 NL/min / 7 bar Extraction capacity: approx. 2,200 – 2,400 m³/h Extraction ports: 4 x 120 mm Features & Equipment: Air flotation tables for easy handling of large panels Floating clamps for precise cutting Scoring unit for chip-free cuts PC/PLC control (Maestro system possible) Robust industrial design for high workload High repeatability and cutting quality Material suitability: Suitable for: Chipboard MDF / HDF Multiplex / plywood Coated panel materials The machine is fully operational and ready for use. Viewing possible anytime by appointment. Lsdpfxoylp S Eo Apmjrp Location: Germany If you are interested, please get in touch – further photos, videos, or detailed information are available upon request. Dismantling and delivery can be arranged at additional cost.

Condition: used, Wide belt sander SBF SATEFANI 2W126   - The machine in stock - Reconditioned - very good condition   TECHNICAL PARAMETERS :   - Maximum grinding width 1100 mm - The maximum height of the element 160 mm - The minimum amount of grinding 3 mm   - The main engines 2 x 11 kW - Engine feed 2.2 kW - Engines height adjustment 0,37 kW   - 1 rubber roller 65 shore with a diameter of 270 mm - 2 rubber roller 45 shore with a diameter of 400 mm   - Two types of feed speed - Pneumatic oscillation on krańcówkach Lrjdpfx Apocvwf Tsmop - Nozzle diameter 2 x 150 mm - Tape in very good condition   Overall dimensions machine: - Length 280 cm - Width 180 cm - Height 250 cm - Weight ~ 3000 kg

Condition: excellent (used), CATALOG NUMBER 7946 Technical Data: - Track width: 300 mm - Working width of shaft: 300 mm - Max. blade diameter: 350 mm - Blade bore diameter: 70 mm - Max. cutting height: 120 mm - Table width with extension: 1030 mm - Table length: 1840 mm – Top: Lodjy Uxy Sjpfx Apmjrp - Kickback protectors (anti-kickback barrier): 2 rows - Metal feed roller, pressure type - Kickback protectors - Metal feed roller, pressure type - Shaft with saw blades - 2 smooth metal feed rollers – Bottom: - Guide rail - Kickback protectors - Track - Laser - Central lubrication of track - Stepless feed speed adjustment - Feed motor: 1.1 kW - Main motor: 18.5 kW - Extraction outlet diameter: 200 mm - Overall dimensions (L/W/H): 1900x1800x1600 mm - Weight: 1770 kg Advantages: – Italian made – With laser – Unpainted – In very good condition – Used multi-blade saw Net price: 55,900 PLN Net price: 13,300 EUR Net price calculated at 4.2 PLN/EUR (In case of significant exchange rate fluctuations, the price may change)

Condition: used, Year of construction: 2023, Cutting area: 5600x5600 mm 1x Gabbiani G 3 130 (56) - High-performance panel dividing saw 1x Compact label printer 1x "eye-M EVO" control console 1x Human-Machine Interface (HMI) software MAESTRO ACTIVE 1x Maestro pattern 1x High-performance, fixed air cushion table with guide, 2500x600 mm, with infeed rollers 3x High-performance, mobile air cushion table - 2500x600 mm, with infeed rollers 1x Double, lateral, automatic aligner with motor drive 1x Foot switch for START/STOP of the working cycle 1x Setup for grooving with height adjustment of the saw blade via the control system Ljdpjxlvktjfx Apmerp 1x "Autosetting" device on the saw carriage for cutting length/width 1x Main saw blade motor 25 HP (18 kW) 50 Hz with star-delta starter 1x Quick clamping of the saw blades with mechanical flanges "AKE" 1x Selective collet chuck (area 0 - 1600 mm) 3x Additional double collet chuck 4x Additional collet chuck with single finger 1x Compact office label printer 1x Cut editor 1x Maestro optiwise - Advanced - No. 1 license 1x Maestro connect: Service agreement for 1 year (including "plug&play" gateway kit) 1x Base 1x MACHINE LANGUAGE: German 1x PC LANGUAGE: German 1x SPEC01 Special version 01 1x European safety regulations (CE marking) including 123 hours of on-site commissioning (within Germany) (daily working hours are 8 hours including travel time). including 1 day of online training MAESTRO OPTIWISE PRO (as needed) including MAESTRO CONNECT 1 year including MAESTRO PATTERN IMPORT (255€ free)!!! FULL MANUFACTURER'S WARRANTY IN THE FIRST YEAR !!! Storage location:

Condition: ready for operation (used), Year of construction: 2020, travel distance X-axis: 3,710 mm, travel distance Y-axis: 1,620 mm, number of axes: 5, spindle speed (max.): 24,000 rpm, This 5-axis SCM Morbidelli M200F was manufactured in 2020. It features an impressive X-axis working range of 3710 mm and a Y-axis working range of 1620 mm. The machine is equipped with a high-performance 5-axis Prisma 5 electric spindle, capable of speeds up to 24,000 rpm. If you are looking to get high-quality CNC processing capabilities, consider the SCM Morbidelli M200F machine we have for sale. Contact us for further details. • Working width: 1585 mm • Workpiece length for pendulum machining: 1700 + 1700 mm • X-Y axes travel speed (PRO-SPACE): 56 m/min • X-Y axes travel speed (PRO-SPEED): 78 m/min • Remote control with 7" touchscreen display • TRB14 tool changer with pneumatic remote adjustment • Max. 14 tools • Max. tool diameter: 300 mm (3-axis), 350 mm (5-axis) • FAST14 tool changer • Max. 14 tools • Tool diameter: 180 mm • Axis spacing: 7 positions with 110 mm spacing; 7 positions with 130 mm spacing • Blow-off nozzle system on the electric spindle • 5-axis Prisma 5 electric spindle, “KS” version • HSK 63F • Rotational speed: 1,800–24,000 rpm • Power (S1/S6): 11/12 kW at 15,000 rpm • Clockwise and counterclockwise rotation programmable via NS • Coolant circulation system • High-performance vacuum pump: 300/360 m³/h, 50/60 Hz • Work table divided into 8 vacuum zones • Laser system for positioning the suction cups Lrsdpfjzha Twox Apmop • eye-M PRO console with integrated PC • Maestro CNC software

Condition: ready for operation (used), Year of construction: 2017, overall weight: 2,880 kg, This SCM SIGMA PRIMA 67 panel saw was manufactured in 2017. Ideal for precise wood panel cutting, it offers reliable performance for your woodworking projects. Consider the opportunity to buy this SCM SIGMA PRIMA 67 panel saw. Contact us for more information. Machine Benefits Technical Machine Benefits Lredpfx Aezg Tvpepmsp • The panel saw is mainly intended for cutting boards sized 2800 x 2070 mm and these are the formats that were typically processed. The working range of the panel saw is 3800 mm on one of the axes. Extra Information Media Electrical specifications: Voltage: 400 V Phases: 3 Nominal current: 22 A Frequency: 50 Hz

Condition: used, Ferwood Code: RU0001071 - Condition: Used - Compatible Machine: CNC SCM - If interested we offer a revision service, contact us. Lrsdpfx Apou U D Ahemjp

Condition: used, Ferwood Code: RU0001121 - Condition: Used - Compatible Machine: CNC SCM - If interested we offer a revision service, contact us. Ljdpfsu U D N Uex Apmorp

Condition: ready for operation (used), Year of construction: 2019, travel distance X-axis: 3,110 mm, travel distance Y-axis: 1,620 mm, travel distance Z-axis: 180 mm, number of axes: 5, spindle speed (max.): 24,000 rpm, This 5-axis SCM Morbidelli M100 CNC processing center was manufactured in 2019. It features a useful working field of 3110 mm in the X-axis and 1620 mm in the Y-axis, designed for high productivity in furniture and panel processing. The machine includes advanced capabilities such as 5-axis routing, drilling, and integrated CAD-CAM software. If you are looking to get high-quality panel processing capabilities, consider the SCM Morbidelli M100 machine we have for sale. Contact us for further details. Lodpfxezgcc Es Apmjrp • Year/usage: Purchased 2019; approx. 2,000 operating hours • Axes/capabilities: 3/4/5-axis machining; drilling (vertical and horizontal on 4 sides), routing/milling, grooving, edge machining; PRO-SPACE safety system • Working area: X 3110 mm; Y 1620 mm; Z passage 180 mm; Y passage 1900 mm; pendulum length 1400 mm • Worktable: TV FLEX 1600 worktable, 6 mobile bars/supports, 6 crossbars; standard bar positions 6–12; mobile bar length 1600 mm; 12 fixed vacuum cups (145 x 145 x 75 mm); prep for 6 pneumatic clamps; 4 pneumatic panel loading/support devices; 8 rear limiters; 8 intermediate limiters; left lateral reference + laser for shaped parts • Structure/motion: Welded steel frame; linear guides with recirculating bearings; X by mobile bars, Y by gantry with rack & pinion both sides, Z by ball screw; CNC-managed positioning • Speeds: Max XY vector speed (PRO-SPACE) 56 m/min; drilling spindles up to 8,000 rpm; electrospindle up to 24,000 rpm • Drilling unit: F23L group with 13 vertical spindles (7R+6L), 10 horizontal spindles (4+3 in X, 2 in Y); integrated X-direction saw Ø125 mm, 2.2 kW; 75 mm pneumatic on/off stroke; inverter for programmable speed • Main spindle: Hiteco JQX 5-axis electrospindle, HSK F63, liquid cooled, ceramic bearings; power class ~10 kW (S6 up to ~15 kW), 24,000 rpm • Tool changers: Rear TRB 14 (14 positions; 350 mm stroke; 115 mm pitch; tools up to Ø240 mm; total 70 kg); Front FAST 14 (14 positions; tools up to Ø130 mm in selected pockets; max 8 kg/tool; total 24 kg) • Control/software: Windows 7; 21.5" FHD display; keyboard/mouse + machine panel; Maestro CNC CAD/CAM (parametric/graphic programming, DXF import, ISO graphics, simulation); TECPAD 7" mobile touch pendant; remote control along machine • Vacuum: Standard vacuum pump (machine standard); centralized automatic lubrication • Utilities: Installed power 23 + 28.5 kVA; compressed air 450 NL/min; dust extraction requirement 4500 m³/h, 25 m/s, outlet Ø250 mm; centralized/optimized extraction with adjustable conveyor and grouped outlets • Safety/standards: PRO-SPACE concept (no front photocells/side fences per offer), CE conformity, emergency stops and guarded areas as per EU norms Additional equipment • Additional vacuum pump: 1 x 90 m³/h • Additional hardware key for Xilog/Maestro (USB)

Condition: new, Year of construction: 2025, New machine Year of manufacture: 2025 Description: Technical Specifications Working width: 630 mm Work table dimensions: 640 x 1000 mm Working height: - Maximum: 300 mm - Minimum: 3.5 mm Max. depth of cut in one pass: 8 mm Min. workpiece length: 260 mm Cutter shaft diameter: 120 mm 4 Knives: 35 x 3 x 640 mm Cutter shaft speed: 4,500 rpm Feed speed electronically adjustable: 4–20 m/min Feed motor (S6 -40%): 1.3 kW Extraction connection diameter: 150 mm Standard Equipment and Accessories - Automatic thickness table elevation with 2 speeds and micrometric adjustment - Thickness table with vertical movement via 4 steel-threaded spindles - Electronic control with 2 axes for setting: * the input value of the thickness table * the feed speed - Stepless feed speed adjustment from 4 to 20 m/min via inverter - Feed speed automatically adapts in relation to the main motor’s maximum power consumption - Upper ribbed steel roller at infeed - Two upper rubber-coated feed rollers at outfeed - Replaceable feed rollers - Independent pneumatic pressure regulation of the upper feed rollers - Motor power: 9 kW 50 Hz (11 kW 60 Hz) with automatic star-delta starting: * S1: 7.5 kW / 10 HP / 50 Hz (8.8 kW / 12 HP / 60 Hz) * S6 -40%: 9 kW / 12 HP / 50 Hz (11 kW / 15 HP / 60 Hz) Safety/Protection - Noise dampening protection at infeed and outfeed - Micro safety switch at protective cover - Emergency stop switch at front and rear of the machine - Lockable main switch - Motor protection switch - Low-voltage circuit (110 Volt) - Automatic motor brake - CE Declaration of Conformity Product code: S 7 109999 Standard safety regulations 530314 TERSA – Cutter shaft (monoblock version) with disposable double-edged knives 083201 Base frame Lsdpfx Apsy D U A Ijmerp 930731 Volt 400 EU R02017 L’invincibile S 7 CE version 931201 Frequency 50 Hz 109993 MACHINE LANGUAGE: German Availability: short-term Location: Flörsheim

Condition: new, Year of construction: 2025, Technical data: usable working width 520 mm total table length 2310 mm cutter block diameter 120 mm cutterblock speed 5000 rpm 4 knives 35x3x520 mm aluminum dressing fence 1200x190 mm planing fence inclination from 90° to 45 min./max. planing height 3 / 250 mm feed speed thickness 5-8-12-18 m/min. Suction stroke diameter dressing 120 mm Suction hood diameter thickness 120 mm Standard equipment: - Work table adjustment in the infeed by means of parallelogram system, indication for chip removal by degree scale. - simultaneous height adjustment and locking of work tables complete with anti-tilt device - quick changeover system to switch from dressing to thicknessing operations (CE version) by means of a special support for opening the dressing tables and an automatic pneumatic positioning system of the suction hood, with hydraulic support - "READY" electronic control includes: - Adjustment of the thicknessing table - Manual, semi-automatic and automatic mode with 99 storable working programs - Additional functions: Calculator and hour meter - machine table with height adjustment by 4 steel threaded spindles - rubber-coated feed roller at the outlet - exchangeable feed rollers - link pressure shoes in the infeed - planing shaft and setting gauge for planing knives incl. the following special accessories: "TERSA" cutterblock with one-way reversible knives, swivelling auxiliary fence Lredpen Sm Tijfx Apmsp

Condition: used, Year of construction: 2001, Bottom / right / left / top with Centro Fix cutter heads. Min/Max. working width (finished dimension): 23 - 180 mm Min/Max. working height (finished dimension): 6 - 105 mm Min. workpiece length: 300 mm Feed rate: 6 / 12 rpm Spindle speed: 6000 rpm Spindle diameter: 35 mm Motor power, horizontal spindles: 7.5 kW Motor power, vertical spindles: 5.5 kW Feed motor power: 1 kW Diameter of feed rollers: 120 mm Dust extraction nozzle, 1 piece: 150 mm Dust extraction nozzle, 2 pieces: 120 mm Weight: approx. 950 kg Lrjdpfxoym D Eie Apmsp Location: Nattheim

Condition: used, Year of construction: 2005, Working width: 180 mm Lrodjyq R Aiopfx Apmsp Working height: 110 mm Number of working spindles: 4 Spindle arrangement: bottom, right, left, top Motor power (bottom & top spindle): 7.5 kW Motor power (right & left spindle): 7.5 kW Adjustment (bottom spindle): - Adjustment (right spindle): - Adjustment (left spindle): handwheel Adjustment (top spindle): handwheel Planer heads (bottom & top): Centrolock Planer heads (left & right): Centrolock combined with profiling capability Feed speed: 2 Feed roller pressure: spring Current consumption: 32.8 A Extraction connection: Machine length: Machine width: Weight:

Condition: used, Year of construction: 1999, Carriage length: 3800 mm Cutting width at the width stop: 1500 mm Cutting width at the cross-cut fence: 3200 mm Cutting depth: 140 mm Scoring unit: no Saw blade height adjustment: electric Swivel adjustment saw blade: electric Width stop adjustment: electric / position control Saw blade angle display: digital Cutting height display: - Width stop display: Digital Cutting ruler display: Scale Saw blade diameter: 400mm Speeds: 3 Motor power: 7,5kW Motor brake: Yes, automatic Suction connection: 80mm and 120mm Machine length: 3900mm Lrjdpfxevxi Dds Apmep Machine width: 2200mm weight: 1000kg

Condition: used, SCM SI400n sliding table saw Lrsdjznbcmspfx Apmep Table extension: 200 cm, Main motor: 7.5 kW, Scoring saw, manually adjustable, Max. cutting width from the right side: 1670 mm, Tilt: 0-45 degrees, manually adjustable, Blade height adjustment: manual, Max. blade diameter: 400 mm, 3 blade speed settings.