Used Scm Sandya 5 for sale (610)

Condition: excellent (used), Catalogue number 7790 TECHNICAL DATA - Max. working width: 1100mm - Max. working height: 170mm - 2 units: - Rubber pressure roller 1) Grooved metal calibration roller - Rubber pressure roller 2) Grooved rubber roller + sanding pad + metal roller - Rubber pressure roller - Motor power of unit I and II: 11kW - From below: - 3 metal sliding rollers - Conveyor belt - 2 metal sliding rollers - Pneumatic belt oscillation - Electric and manual table lifting (for precise adjustment) - 2 feed speeds Fedpfx Afox S Eb Rsnjfu - With pneumatic brake - Operating pressure: 8 bar - Extraction port diameter: 2x160mm, 4x100mm - Overall dimensions (L/W/H): 2000x1600x2100mm - Weight: 1170kg ADVANTAGES – Not repainted – Italian manufacture – 2 operating units – DTR documentation – Used sander, in very good condition Net price: 36,900 PLN Net price: 8,790 EUR (based on 4.2 EUR exchange rate) (Prices may change with higher exchange rate fluctuations)

Condition: used, Year of construction: 2007, functionality: fully functional, grinding width: 950 mm, grinding height: 170 mm, height adjustment type: electric, type of input current: three-phase, - Italian manufacture Fsdpfx Aexdxfqofnjfu - year of manufacture: 2007 - combination sanding shoe TECHNICAL SPECIFICATIONS: - sanding width: 950 mm - sanding height: 4–170 mm - motor power: 11 kW - 1st unit: steel drum with pneumatic engagement - drum diameter: 110 mm - 2nd unit: combination sanding shoe - pneumatic engagement for rubber drum: 78 Shore - shoe with pneumatic adjustment - pneumatic oscillation - air blast for belts - electric height adjustment - two belt speeds: 8.3 m/s and 16 m/s - electronic sanding height positioning - continuously variable feed speed: 4–20 m/min - minimum material length: 500 mm - extraction nozzle diameter: 2 x 140 mm - machine dimensions (L/W/H): 150 x 180 x 210 cm - weight: ~ 1010 kg

Condition: ready for operation (used), Year of construction: 2000, functionality: fully functional, machine/vehicle number: AE/020112, total width: 1,300 mm, overall weight: 2,750 kg, number of rollers: 4, No reserve price – guaranteed sale to the highest bidder! MACHINE DETAILS Overall width: 1,300 mm Electrical data Rated voltage: 400 V Frequency: 50 Hz Phases: 3 ~ Rated current: 180 A Short-circuit current: 10 kA Fjdsxmhiwopfx Afnjfu Max. load current: 420 A Weight: 2,750 kg EQUIPMENT Two rollers at the top Two rollers at the bottom Note: The machine was dismantled as part of a liquidation and is loaded onto a truck. The machine was fully operational at the time of dismantling.

Condition: used, Year of construction: 2003, SCM SANDYA 20 model 20 M3 135 calibrating and sanding machine, used Year of manufacture: 2003 Serial number: AE/024903 Maximum working width: 1350 mm Feed speed: 3.5-18 m/min with inverter Working height: 4-170 mm Vacuum bed: 7.5 KW Configuration: 1st group: grooved steel calibration roller D. 250 – motor 22 KW 2nd group: sanding roller D. 250, hardness 45 SH – two-speed motor 9/11 KW, 1400/2800 rpm 3rd group: combined roller D. 170, hardness 30 SH + segmented elastic pad (46 segments) – motor 11 KW with inverter Fodoxwbydopfx Afnofu 4th group: scotch brite finishing roller Bed positioner with workpiece Belt size: 2620 x 1370 mm Blowers for 2nd and 3rd belt Automatic belt centering Electronic control of 1st / 2nd / 3rd roller / pad

Condition: like new (used), working width 1350 mm, calibration unit with metal roller, combination unit with two rubber rollers and multi-segment pad, oscillation by photocells, machine function activation from control panel, belt blow-off, stepless feed speed regulation for sanding belt on 2nd unit, pneumatically controlled multi-segment pad with adjustment, year of manufacture 2007, electric table adjustment, material thickness gauge, vacuum under-table. Ffjdpox Daz Hofx Afnju

Condition: excellent (used), CATALOG NUMBER 7850 Technical data: - Maximum workpiece width: 1100 mm - Maximum workpiece height: 160 mm 2 working units: 1) Grooved rubber calibration roller 2) Grooved rubber roller + pneumatic segmented pad + steel roller - Motor power: 15 kW - Brake - From above: - Split, non-slip rubber feed roller - Working unit - Split, non-slip rubber feed roller - Working unit with segmented pad - Split, non-slip, outfeed rubber roller - Cleaning brush - From below: - 2 non-slip steel rollers - Feed belt Fodpfx Afex Hhy Sonefu - 2 non-slip, outfeed steel rollers - Pneumatic belt oscillation controlled by photocell - Electric table height adjustment - 2 feed speeds - Feed motor power: 0.75 kW - Sanding thickness potentiometer - Working pressure: 8–10 bar - Dust extraction port diameter: 3 x 165 mm - Overall dimensions (L/W/H): 1900 x 1700 x 1930 mm - Weight: approx. 1,502 kg ADVANTAGES – Italian production, SCM brand – 2 working units – Sanding thickness potentiometer – Pneumatic segmented pad – Original paint (not repainted) – Technical documentation (DTR) – Used sander, very good condition Net price: 32,900 PLN Net price: 7,830 EUR Net price calculated at the rate of 4.2 PLN/EUR (price may change in the event of significant exchange rate fluctuations)

Condition: used, Wide belt sander SCM Sandya 10S M2 110 Built in 1999 Fjdpfx Aswnh A Aefnefu Sanding belt dimensions 2620x1115mm 380V 1st sanding unit Contact roll 180mm Engine 18.5kW 2nd sanding unit Combi aggregate with sanding pad Engine 11kW Sanding width max 1100mm Sanding height Min/max 4/170mm Throughput speed 4.5-9 m/mins Dimensions 2300x2205x2500mm, weight 1850kg - Documentation available: No - CE certificate present: No - Number of units [pcs]: 2 - └ Unit 1: - - Type of unit: Contact roller - - Roller diameter [mm]: 180 - - Motor power [kW]: 18.5 - └ Unit 2: - - Type of unit: Combi - - Sanding belt length [mm]: 2620 - - Sanding belt width [mm]: 1115 - - Motor power [kW]: 11 - Max. working width [mm]: 1100 - Min. working height [mm]: 4 - Max. working height [mm]: 170 - Min. feed speed [m/min]: 4.5 - Max. feed speed [m/min]: 9 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Year of construction: 2022, PANEL SAW WITH TILTING SAW BLADE Linvincibile SI 5 KEY FEATURES SLIDING TABLE: GUARANTEED SUPERIOR CUTTING QUALITY OVER THE LONG TERM TELESCOPIC ARM: AN “UNBEATABLE” SMOOTH MOVEMENT SAW UNIT: FOR A PERFECT CUT Technical Data SI 5 Main saw blade diameter (mm): 550 Cutting capacity with extendable fence - with table 3200 mm - with table 3800 mm 3200x3200 3800x3200 Saw blade tilt (degrees): 46 Max. cutting height at 90° (mm): 200 Max. cutting height at 45° (mm): 130 Saw blade speed (rpm): 2500-3500-5000 Scoring blade speed (rpm): 8500 - Extractor port diameter: - on frame - on blade guard 120 100 Main motor power [S6 -40%] Hz50 kW: 7 Scoring motor power [S6 -40%] Hz50 kW: 0.9 Cutting width at rip fence (mm): 1600 Standard equipment and accessories - Optimizer/Process control app for tablets: SCM Thundercut. The app can be downloaded from the App Store or Play Store for tablets compatible with iPadOS or Android. It can be activated via the QR code supplied with the machine. The app enables: * Management of machine fleet and material/panel storage * Creation and editing of projects, importing projects from main furniture design software (file format "cpout"), importing cutting lists * Optimization of cutting lists by selecting one or more proposals from the optimization software integrated into the app * Correct machine settings for each cut, thanks to the simple and intuitive graphics of the 3D sequencer, guiding the operator step by step * Printing barcode labels to identify the various parts, via Bluetooth connection with compatible label printers. - 10-year warranty on the sliding table guide system - Sliding carriage entirely made of aluminum structure with guidance on crimped, hardened and arc-ground steel rails with large contact area - Max. saw blade diameter* up to 450mm with scoring blade mounted* up to 550mm without scoring blade - eye-S 15" electronic control including: * 15" touchscreen monitor * Direct control of the following working axes with manual, semi-automatic, automatic, and incremental modes: - Height adjustment of the main saw blade - Tilt adjustment of the saw unit - Rip fence adjustment - Height and lateral adjustment of the scorer (the scorer is automatically raised to the set position on activation and lowered on deactivation) * Operator assistance functions for complex cuts * Ability to store up to 1000 programs with associated image * Ability to store up to 1000 different tools with associated image * Cutting process management of preloaded parametric machining programs * Environment for creating and storing new sequenced working programs * Automatic import of working dimensions from Thundercut app * USB port * Ready for network connection - Auxiliary function of the electronic control, including: * Determination of correct fence position on rip fence for format processing with tilted saw blade * Determination of correct fence position on rip fence for angle cuts with mitre fence on the work table with or without tilted saw blade - Pivoting control panel above the table - Scoring unit with independent Ffsdpfx Aexqtvqefnou

Condition: used, Year of construction: 2020, CNC-CONTROLLED MACHINING CENTER WITH MULTIFUNCTIONAL TABLE - WORK CELL VERSIONX400 CELLDrilling and milling made for you!The numerically controlled machining center is equipped with a wide range of milling/drilling tools to meet every need in the processing of wood and similar materials.- More powerful, with drilling spindles with 8,000 rpm and . Technology, the toughest spindle available on the market, with over 1,000 maintenance-free hours of use. Better and more comprehensively equipped, with various configuration options thanks to the multifunctional table to optimally equip the machine according to your needs. Easier and more understandable programming thanks to the integrated MAESTRO CNC CAD-CAM module. Easier to use: the work table is accessible at all times, the electrical cabinet and vacuum pump are integrated, and in the PRO SPACE configuration there are no guards. Supporting structure. The supporting structure consists of a particularly strong monolithic steel base, heavily ribbed and very rigid. The particularly wide support was specifically designed to give the machine stability, ensuring consistent precision regardless of the working conditions and eliminating the need to anchor the machine to the floor. The base forms a large and solid support for the mobile column: the work unit is thus equipped with a balanced, stable, and durable support that can withstand the most extreme stresses, ensuring higher quality performance and greater precision. The mobile gantry consists of a single, solid unit anchored to the base on both sides and slides on pyrotechnic guides with top-quality ball-return slides. The dual motorization along the X-axis ensures top performance even under demanding working conditions. The movement of the lower moving unit (X-axis) and the working unit along the rod of the moving unit (Y-axis) is achieved thanks to a rack/pinion transmission with helical teeth. this creates a greater tooth-to-tooth thrust which achieves greater acceleration and greater speed along the X and Y axes. The specially designed helical gearing ensures less wear on the mechanical components and less noise. The vertical Z axis is driven by a screw with ball return which ensures perfect balance with dynamic loading and strong acceleration and deceleration. The main milling unit is directly coupled to the Z axis carriage and ensures absolute quality of finishes as any vibrations are completely eliminated. Translation along the X-Y-Z axes is carried out by brushless motors driven by static inverters; These ensure: - Reduced processing times thanks to improved acceleration - Better positioning accuracy thanks to the high-resolution encoder - Zeroing of setup operations when switching on the machine thanks to absolute encoders - Zeroing of general maintenance operations since there are no brushes with the "brushless" system The management of the axis displacement and, in general, of the machine's working elements is carried out by an industrial NS module with digital D Ffodpfx Aovvi N Iofnju

Condition: excellent (used), Wide Belt Sander for Calibration and Fine Sanding SCM Model RCS 1st Unit: Calibration Roller, Steel 2nd Unit: Combination Unit (Roller 60 Shore, sanding pad with 2 inserts – hard, soft) Working width: 920 mm Abrasive belt dimensions: 930 x 1,525 mm Main motor power: 11.0 kW, 400 V, 50 Hz Feed motor power: 0.37 kW, 400 V, 50 Hz 2 feed speeds Electromotive table height adjustment Main switch lockable 2 x emergency stop Table extension with 2 rollers, front and rear Sanding pad inserts fitted with new graphite cloth Including as-new sanding belts All documentation included Note for used machinery: • Specifications, data, and prior sale are subject to change. • Prices stated are ex works – free loaded! • The machine has been cleaned and functionality tested. • All machines are sold as seen without any rights to warranty. Ffjdpjxqggcofx Afnju Buyers are welcome to inspect the machines on site. • Special agreements are only valid in written form. (We only respond to inquiries that include your address and telephone number!)

Condition: new, Features: 5-axis electronic control overhead control panel, rotatable electronic adjustment for scoring unit automatic rip fence with movement on screw and ball pushing linear guide start / stop pushbuttons integrated in the carriage “Quick Lock” squaring fence sliding carriage with 'arc' profile - 10 years warranty telescopic swing arm made of large dimensioned extrusion and linear guide on recirculating ball bearings Fodpfx Afecrnm Njnefu Technical Data: saw blade DM mm 550 scoring unit blade DM mm 120 squaring capacity mm 3200x3200 tiltig capacity deg. 0 +46 max. cutting height at 90° mm 200 max. cutting height at +45° mm 130 saw blade speed RPM 2500, 3500, 5000 scoring unit blade speed RPM 8500 DM suction connections mm 120 & 100 main motor Hz 50 kW 7,0 scoring unit motor Hz 50 kW 1,3 cutting capacity right side mm 1500 incl. following options: 570335 "Pro-Lock" system for quick changing of main saw blade without tools

Condition: new, work table dimensions 2500 x 780 mm spindle DM 30 mm tilting of spindle +/- 45,50 usable spindle lenght 140 mm Max. tool DM under table 300 x 80 mm suction DM 1 x 120 & 2 x 100 mm Motor elektrospindel 7,50 kW elektro spindel with inverter for speed 900 to 12.000 RPM control panel with mit "Easy Touch 7" program Fsdpjd Etkhofx Afnsfu "Flex"- fence with autom. adjustment via 'Easy Touch 7' left right turning of spindle table elongation front INCL. OPTIONS: - "Fast” table with autom. adjustment via 'Easy Touch 7' control - version “LL” with 2 cast iron tables (2500 mm) Advise used machines: • Technical data without obligation, mistake and intermediate sale reserve. • Price is considered ex-location price • All articles or machines are bought as seen without any entitlement on warranty. • It is left to the choice of the buyer to view the machines before at its location. • Special arrangements are possible but only valid in written form. (We answer your inquiries only with stated address + telephone number!)

Condition: excellent (used), functionality: fully functional, SCM Sandya 3 wide belt sander Working width 950 mm Number of units 2: 1 unit with steel shaft 2 combi unit - rubber shaft + shoe Shoe automatically fitted Oscillation on photocells 2 conveyor belt speeds Fjdpfxeyiacgj Afnjfu Belt feed speed 4.5/9 m/min. Motor power 7.5 KW Paper size 1900×970 mm

Condition: new, Year of construction: 2026, Holzkraft Minimax ST 5es - Maximum equipment for professionals Saw-milling combination with miter cutting device and swiveling milling spindle Art. No.: 5501086 Ø 350 mm main saw blade with 118 mm max. cutting height, which is also achieved when the scoring saw blade is installed Scoring unit with separate motor and Ø 120 mm saw blade, easily and precisely adjustable from the outside Saw unit can be tilted from 90° to -45 High-precision format sliding carriage made of anodized aluminum Large extension arm (1200 x 650 mm) With material roller and extendable aluminum telescopic fence up to 3300 mm Pivoting milling spindle from 90° to -45° backwards into the milling fence Four milling speeds With right-left rotation of the milling spindle Three independent motors With lockable main switch, motor protection switch With separate saw-parallel fence and separate jointing fence for dressing as standard Equipment details: Sliding carriage with ball contact system Made of anodized aluminum Guides made of hardened and ground steel, 15% harder than conventional steel Double cradle milling unit Swiveling, made of cast iron Fixing points directly on the table, thus optimal running smoothness Milling spindle mounted far up on precision ball bearings, thus low bearing load and longest possible service life Powerful industrial motors Milling stop Heavy-duty professional version The high-quality milling fence made of cast iron is supplied with fine adjustment as standard 3-fold positionable for quick return of the setting With fine adjustment via toothed rack, numerical display and aluminum milling stop jaws Rip fence With fine adjustment and quick clamping Sturdy round bar guide made of ground steel Conveniently folds down for cutting large workpieces Reversible aluminum ruler for narrow workpieces Cast iron double weigh saw unit Height adjustment via dovetail guide Extremely robust and torsion-resistant for precise cuts Close to the saw blade, mounted on both sides Height and up to 45° inclination adjustable Scoring unit with separate scoring motor 0.55 kW as standard Boom with angle-adjustable telescopic crosscut fence with degree raster graduation Dimensions and weights weight approx. 900 kg Connection dust extraction diameter of dust extraction nozzle 3 x 120 mm Suction port diameter saw blade guard 80 mm Drive power scoring motor 0,55 kW main motor 2 x 5,0 kW Electrical data Supply voltage 400 V Format sliding carriage and table Width of sliding table 360 mm height of sliding table 142 mm Table length 1380 mm table width 465 mm Milling spindle Ffedpfxod Hx Hms Afnou spindle inclination 0 - -45 ° useful length of spindle 125 mm spindle speeds 3500/6000/8000/10000 min-¹ Milling tool diameter max. lowerable 240 mm tenon milling 320 mm Circular saw unit and scoring unit trimming length 3200 mm Cutting width with rip fence 900 mm Max. Trimming width to the left of the saw blade 3300 mm saw blade inclination 90 - 45 °. Max. Cutting height 90° 104 mm Max. Cutting height 45° 68 mm Location: Ex stock 54634 Bitburg - immediately available -

Condition: excellent (used), Wide Belt Sander SCM Sandya 30 RT Working width: 1100 mm Working height: 3–160 mm Number of units: 2 Calibration drum Unit with segmented shoe Motor power: 1. 15 kW 2. 11 kW Optical oscillation Abrasive belt dimensions: 2620x1115 mm Fsdsyh N Icopfx Afnofu

Condition: excellent (used), Wide belt sander SCM Sandya CLK + Vacuum Working width: 1100 mm Working height: 3–160 mm Number of sanding units: 2 Calibrating roller: rubber-coated Combi unit with sanding shoe Main dual-speed motor: 12/15 kW Optical oscillation Fjdjyhfnnjpfx Afnofu Satin-finish brush at machine outlet

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, Used CNC from business closure. SCM Tech Z 5 - year: 2017 - 5-axis - drilling head - immediately available Fsdpfjx Tcv Iox Afnefu

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, grinding belt length: 2,150 mm, input current: 39 A, Wide belt sander SCM suitable for calibration/sanding of solid wood, veneer and lacquer base. Model: Sandya 600 RCS Working width: 1.100 mm Working thickness: 4-170 mm Main motor: 15 kW (invertor) Abbrasive belts speed: 3-16 m/s (inverter) Feeding speed: 3-18 m/min (inverter) Abbrasive belts length: 2.150 mm Fsdpfx Afsygddlonsfu Aggregates: 1. Steel calibrating roller R (diam. 140 mm) 2. Combinated unit CS: - rubber coated roller (diam. 160 mm, hardness 30Sh) - elektronic sectional pad (segments width 30 mm) 3. Sanding brush ScotchBrite (diam. 150 mm) Other equipment: - 5 idle supporting rollers at infeed - 5 supporting rollersat outfeed (1st roller motorized) - version C-Plus - pneumatic exclusion of the 1st roller - pneumatic exclusion of the 2nd roller and the pad - electronic programmator LOGIC TS with LCD touch screen 10,4" - motorized height adjustment Stat of the machine: very good Production year: 2016 Weight: 1.400 kg El. power: In=39A Machine availability: cca April 2026

Condition: new, Year of construction: 2025, New machine Year of manufacture: 2025 Standard Equipment and Accessories - Swiveling operator panel easily accessible for the operator, "eye-S 15" electronic control system. Includes: * 15" touchscreen monitor * Direct control of 6-8 axes with manual, semi-automatic, and automatic operating modes * Operator assistance with the option to manage 3 different points on the tool for accurate determination of the reference point (zero point) * Capability to store up to 1000 programs with associated images * Capability to store up to 1000 different tools with associated images * USB port * Ready for network connection - Operator aid on the electronic control, including: * Tool database management * Display of coordinates at 3 points on the tool for new reference (zero) point determination * Management of tool edge speed * Operator support for common machining tasks - "Flex" milling fence with automatic adjustment via the electronic control system. Complete fence adjusted to tool diameter, infeed jaw for required chip removal. Movable "FLEX" fence from the worktable. - Aluminium fence jaw for the milling fence with inserts for continuous support - "Fast" table insert, manually adjustable, replaces table rings for optimal workpiece support surface - Electrical pre-wiring for a power feed unit - Spindle rotation direction: right/left - Automatic motor start - Version M-E includes: * Electrospindle with max. performance from 3,400 rpm * Electrospindle power 7.5 kW (10 HP) [S6 -40%] * Interchangeable MK5 spindle * Inverter for speeds from 900 to 12,000 rpm - Interchangeable MK5 milling spindle Safety/Protection - Milling guard, max. tool diameter 160 mm - Electronic motor brake effective even without mains power - Safety sensors during tool change for: spindle stop, spindle lock, opening/closing of tool holder - Electropneumatic spindle lock - Microsafety switch on machine door - Emergency stop button - Lockable main switch - Motor protection switch - Control circuit 24V - CE Declaration of Conformity - Frequency 50 Hz - Base Fjdpfsx Nbzuex Afnofu - MACHINE LANGUAGE: German - Standard safety regulations - Manual device for feed support height adjustment according to workpiece thickness with mechanical digital display and horizontal adjustment according to tool diameter. Thanks to the operator panel column, this device allows the feed support to be swung away from the work table. - Voltage 400 V, EU - Quick tool clamping system "T-SET" Allows clamping/unclamping of tools via easy application with a compressed air gun. - L'invincibile TI 5 CE version - "LL" version worktable with two cast iron table extensions; total length 2500 mm, complete with extendable support rail for wide workpieces - Emergency stop switch - Milling spindle diameter 30 mm Availability: short-term

Condition: refurbished (used), Year of construction: 1998, functionality: fully functional, grinding width: 1,100 mm, power: 11 kW (14.96 HP), height adjustment type: electric, Refurbished automatic wide belt sander suitable for calibration of solid wood and sanding of veneered components. The SANDYA 10 model belongs to the higher range of SCM automatic wide belt sanders, characterized by an exceptionally rigid frame, top-quality sanding performance, and versatile applications. Ffodpfxewx I Tpo Afnou 2 units: roller + roller with platen and shared 11 kW motor 1. Calibration roller - steel 2. Sanding roller - soft rubber + pneumatic sanding platen Sanding width: 1100 mm 2 feed belt speeds Automatic thickness measurement Motorized thickness adjustment with display + fine-tuning Table extensions at infeed and outfeed Pneumatic oscillation Very good technical condition, completely refurbished Czech manual available CE safety standard Suitable for calibration and sanding of solid wood and veneer EXCELLENT TECHNICAL CONDITION The machine is refurbished, set up, and tested.

Condition: excellent (used), Wide belt sander SCM Sandya 10 RCS Ffjdpsx Svxyjfx Afnsu Working width: 1100 mm Working height: 3-160 mm Number of sanding units: 2 1. Calibration roller 2. Combi unit with pad CE certificate Sample photo of the machine

Condition: excellent (used), functionality: fully functional, SCM Sandya CLK Wide Belt Sander + Vacuum Working width: 1100 mm Ffjdox Svvfepfx Afnsu Working height: 3–160 mm Number of units: 2 Calibration roller: rubber Combi unit with shoe Extraction ports: 2x 160 mm Sample images of the machine

Condition: good (used), Code: 0667 Brand: SCM Model: SANDYA UNO/RCS Ffodpfx Aex A A Duefneu Automatic wide belt sander with 2 belts (Roller + Pad) for furniture, furnishings, wooden doors and windows, doors and various panels Composition: 1° Group steel calibrating roller 2° Group roller + finishing pad Technical data: Working width mm 920 Working height mm 3 - 160 Sanding belt dimensions mm 930 x 1525 N° 2 belt feed speeds mt/min 4,5/9 Main motor power Hp 10 Infeed and outfeed roller conveyors Electric table lifting Working pressure atm 6 N° 2 suction mouths diameter 160 mm Overall dimensions mm 1500 x 1600 x 1700 h Weight kg 1070

Condition: new, Year of construction: 2025, New machine Year of manufacture: 2025 Features and technical data: Technical specifications: Main saw blade diameter (mm): 550 Panel cutting with pull-out fence and sliding table 3200 mm: 3200x3200 Saw blade tilt (degrees): 46 Max. cutting height at 90° (mm): 200 Max. cutting height at 45° (mm): 130 Saw blade speed (rpm): 2500-3500-5000 Scoring blade speed (rpm): 8500 - Extraction port diameter: - on frame: 120 mm - on saw blade guard: 100 mm Main motor power [S6 -40%] Hz50 kW: 7 Scoring blade motor power [S6 -40%] Hz50 kW: 9 Cutting width at rip fence (mm): 1000 Standard equipment and accessories: Fsdpfx Afoxavrgonjfu - Optimizer/processing control app for tablets: SCM Thundercut The app can be downloaded from the App Store or Play Store on tablets compatible with iPadOS or Android. It can be activated using the QR code supplied with the machine. The app enables you to: * Manage the machinery fleet and materials or panel stock * Create and edit projects, import projects from main furniture design software (file format "cpout"), and import cutting lists * Optimize cutting lists by selecting one or more proposals from the app’s integrated optimization software * Properly set up the machine for each cut, thanks to the simple and intuitive graphics of the 3D sequencer that guide the operator through every step * Print barcode labels for marking different parts via Bluetooth with compatible label printers - 10-year warranty on the sliding carriage system - Maximum saw blade diameter: * Up to 450 mm with scoring saw blade mounted * Up to 550 mm without scoring saw blade - eye-S 15" electronic control system including: * 15" touchscreen monitor * Direct control of the following axes in manual, semi-automatic, automatic, and incremental modes: - Main saw blade height adjustment - Saw unit tilt adjustment - Rip fence adjustment - Scoring blade height and lateral adjustment (the scorer is automatically raised to the set position when switched on and lowered when switched off) * Operator assistance functions for complex cutting operations * Storage capability for up to 1000 programs with corresponding images * Storage for up to 1000 different tools with corresponding images * Cutting sequence management for preloaded parametric machining programs * Environment for creating and storing new sequenced working programs * Automatic acquisition of working dimensions from the Thundercut App * USB port * Prepared for network connection - Auxiliary function of the electronic control system, including: * Determination of the correct stop position on the longitudinal fence for panel machining with tilted saw blade * Determination of the correct stop position on the longitudinal fence for angle cuts with the mitre fence on the work table with or without tilted saw blade - Swivelling control panel above table

Condition: like new (used), working width: 1100 mm unit with steel roller 2nd unit rubber with pad motor power: 11 kW Ffjdpfx Afjx H Rq Hjnsu oscillation via photocells 2 conveyor feed speeds pad automatically triggered with adjustment units switched on from the control panel material thickness sensor year of manufacture: 2002