Used Scm Double End Tenoner for sale (583)

Condition: used, Year of construction: 2023, Cutting area: 5600x5600 mm 1x Gabbiani G 3 130 (56) - High-performance panel saw 1x Compact label printer 1x "eye-M EVO" operating console 1x Human-machine interface software (HMI) MAESTRO ACTIVE 1x Maestro Pattern 1x High-performance fixed air cushion table with guide, 2500x600 mm, with infeed rollers 3x High-performance movable air cushion table - 2500x600 mm, with infeed rollers 1x Double lateral automatic aligner with motor drive 1x Foot switch for START/STOP of operating cycle 1x Grooving device with height-adjustable saw blade via control system 1x "Autosetting" device on the saw carriage for cut length/width 1x Main saw blade motor 25 HP (18 kW) 50 Hz with star-delta starter 1x Quick-clamping of saw blades with mechanical "AKE" flanges Psdpfx Aasxlvkto Esha 1x Selective collet closure (area 0 - 1600 mm) 3x Additional double collets 4x Additional single-finger collets 1x Compact office label printer 1x Cut editor 1x Maestro Optiwise - Advanced - No. 1 license 1x Maestro Connect: service contract for 1 year (including "plug & play" gateway kit) 1x Base 1x MACHINE LANGUAGE: German 1x PC LANGUAGE: GERMAN 1x SPEC01 special version 01 1x European safety regulations (CE marking) Including 123 hours of on-site commissioning (within Germany) (daily working time is 8 hours including travel time). Includes 1 day online training for MAESTRO OPTIWISE PRO (as required) Includes 1 year MAESTRO CONNECT Includes MAESTRO PATTERN IMPORT (normally €255 - free of charge) Location:

Condition: used, Used machine Equipment and technical specifications: Psdpex Entcofx Aa Eoha - 4-knife planer shaft - Feed speed: 7.5/15 m/min - Surface planer: - Working width: 500 mm - Total table length: 2,200 mm - Motor: 4 kW - Thickness planer: - Minimum working height: 3 mm - Maximum working height: 235 mm - Max. depth of cut: 8 mm - Digital height adjustment display with decimal precision Availability: short-term Location: 63934 Röllbach

Condition: used, For sale: SCM planer machine. Technical condition: good; visually, the machine requires some refurbishment. Phodpex Dr Eqjfx Aa Eja Specifications: - 50 cm planing width - 4-knife cutterblock - Electric height adjustment - Tiltable fence - Motor brake not functioning The machine presents well and performs as it should. With a little attention, it will quickly look as good as new again.

Condition: excellent (used), Flexible N.C. line for drilling, routing and "hardware" insertion. Numerical Control "TPA" Albatros. Composed by: 1) Hedgehog loader, with 12 positions (for 12 panels), vertical panel introduction. 2) CNC Drilling and routering machine Mod. Over 25.13 with inserter (for bushes, shelf support and base). - N. 1 operating head (estimated KW 5,5) with tool storing revolver (10 positions) - N. 1 boring head with 24 independent spindles (X axis) - N. 1 boring head with 2 independent spindles (Y axis) - N. 1 boring head with 5 independent spindles (Z axis) Phsdpfx Ajhvagkja Eea - N. 1 insertion unit (bushing screwing) - N. 1 insertion unit (shelf support pressure) - N. 1 storage and feeding tank 3) Unloader (90° side-deplacement), with motorized conveyor for vertical outfeed of the panel. 4) Unloader - tilting (0°-90) moves the panel from vertical to horizontal, with motorized conveyor

Condition: new, Year of construction: 2025, Panel Saw Holzkraft / SCM minimax si 4 - 400 / 32 With tilting saw blade and anodised aluminium sliding table Article number: 5504932 Brand: Holzkraft Heavy-duty worktable made of strongly ribbed cast iron – for maximum stability and durability Robust welded steel base – ensures high torsional rigidity and vibration-free operation Precision sliding table made of anodised aluminium – smooth running via high-quality ball contact system Carbide guide rails – for lasting precision and minimal maintenance Tilting cast iron saw unit with double segment guide – precise zero-point tilt for highest cutting accuracy Heavy-duty rip fence with round bar guide Equipped with adjustable eccentric clamp Integrated mitre cutting device on the sliding table – for quick and precise mitre cuts Scoring unit with powerful separate drive motor Equipped with high-quality crosscut fence – with heavy-duty telescopic stop, integrated roller for easy loading and unloading, inclined scale for comfortable reading and practical eccentric clamp for secure hold Saw blade speed adjustable in two stages Practical saw blade pendulum guard TECHNICAL DATA Dimensions and Weights Weight (net) approx. 670 kg Extraction Connection Extraction port diameter: 120 mm Extraction port diameter at saw blade guard: 80 mm Electrical Data Connection voltage: 400 V Mains frequency: 50 Hz Scoring motor power: 0.65 kW Rated output (motor power): 7.0 kW Duty type (main motor): S6 Duty cycle (main motor): 40% Sliding Table and Table Sliding table length: 3200 mm Sliding table width: 360 mm Sliding table height: 175 mm Table length: 1000 mm Table width: 560 mm Table height: 900 mm Saw Unit Cutting width with rip fence: 900 mm Max. crosscut width left of saw blade: 3200 mm Crosscutting length: 3200 mm Saw blade tilt: 90 - 46° Max. cutting height at 90°: 136 mm Max. cutting height at 45°: 97 mm Note on max. cutting height: Independent of the scorer Saw blade diameter: 400 mm Note on saw blade diameter: Independent of the scorer Saw blade speed: 3500/5000 rpm Scoring Unit Scoring blade diameter: 120 mm Scoring blade speed: 9200 rpm Phedpfx Aajxw N Sbs Eea Features Scoring unit: with separate scoring motor Anodised aluminium sliding table Handle for sliding table Crosscutting fence Material roller on crosscutting fence Rip fence: with round bar guide Stops: Two professional folding stops Crosscutting shoe Eccentric clamp Table extension Table widening Saw blade pendulum guard Manual height adjustment and tilting of saw unit Location: ex stock 54634 Bitburg - immediately available -

Condition: used, Year of construction: 2023, Exhibition Machine Garbsen CNC-CONTROLLED MACHINING CENTER morbidelli m100 Drilling and Milling Made for You! This numerically controlled machining center is equipped with a comprehensive range of accessories and tools for milling and drilling, enabling it to meet every requirement in the field of wood processing. Highly efficient – with drilling spindles reaching up to 8,000 rpm – and featuring technology that includes the most robust spindle available on the market, offering more than 1,000 hours of maintenance-free operation. Fully equipped – the suction cups can be individually configured with the TV FLEX worktable to adapt the machine precisely to your requirements. Easy and intuitive programming thanks to the integrated Cad-Cam MAESTRO CNC software. User-friendly operation is ensured by the lowered machine frame, which provides unrestricted access to the worktable at all times. The control cabinet and vacuum pump are integrated into the machine base, and the PRO SPACE variant requires no additional structural safety measures. Robust Construction The supporting structure consists of an especially sturdy monolithic steel base, ribbed for stability and durability. The extra-wide bearing surface is purpose-designed to provide the machine with stability, ensuring constant precision in all working conditions. Anchoring to the floor is not required. The base forms a large, solid foundation for the moving gantry: the working unit is equipped with a balanced, stable, and resilient support, withstanding the highest stress, which ensures superior quality performance and greater accuracy. The moving gantry is a solid single piece anchored to the base, running on high-quality prismatic guides with ball bearing carriages. The working unit is mounted to this and moves along the Y and Z axes on prismatic guides with ball bearing carriages as well. Movement of the lower movable unit (X-axis) and the working unit along the gantry (Y-axis) is driven by a helical toothed rack and pinion system; this produces greater tooth-by-tooth thrust, achieving higher acceleration and increased speed on the X and Y axes. The specially designed helical gearing ensures reduced wear of mechanical components and quieter operation. The vertical Z-axis is driven by a recirculating ball screw, providing perfect balance under dynamic load and withstanding significant acceleration and deceleration. The main milling unit is directly coupled to the Z-axis carriage, enabling superior surface finish quality as vibrations are completely eliminated. Travel along the X-Y-Z axes is achieved with brushless motors powered by static inverters. These provide: - Reduced processing times due to improved acceleration - Increased positioning accuracy due to high-resolution encoders - Elimination of setup tasks at machine startup thanks to absolute encoders - Elimination of general maintenance tasks, as the brushless system has no brushes Podox A Dfgepfx Aa Eoha Axis movement management and general operation of the working elements...

Condition: not inspected (used), Year of construction: 2003, functionality: unexamined, Connected load 480V 42kW 108A, extraction connection 5x120 + 2x150 mm, 1x jointer unit, 2x vertical spindle units, 1x thicknessing unit, 1x universal unit top, 1x universal unit bottom, spindle diameter 40 mm, lubricant pump, pneumatically controlled pressure rollers, connection 6 bar, electric bridge adjustment, central lubrication, stepless feed via frequency inverter, total length 4200 mm, depth 2000 mm, height 1700 mm – as returned by customer Pedex E T Dmspfx Aa Eeha

Condition: used, Year of construction: 1986, Used machine Year of manufacture: 1986 Phedpfoxllxajx Aa Eoa Equipment and technical data: Motor: 4 kW Speeds: 3000 / 4500 / 6000 / 8000 / 10000 rpm Spindle height adjustment via handwheel Setup dimensions: 1200x80x1350 mm Fence jaws made of wood Including Holz Her 3-roller power feeder incl. stand With chassis Dimensions: to follow Weight: to follow Availability: short-term Location: Flörsheim

Condition: new, Year of construction: 2025, Professional long belt sanding machine Electric table height adjustment Quick belt tensioning via lever Phsdpfxewxrl Ns Aa Esa Upper belt with additional graphite coating Professional sanding shoe 250 mm diameter rollers ensure optimal tracking 2 sanding belt speeds Reversible motors (right and left rotation) Tiltable sanding shoe adapts to the work surface Fast and easy sanding belt replacement Standard right-left rotation Manufactured in Italy Properly balanced rollers provide optimal belt drive Quick belt tensioning allows for fast and effortless belt changes. Technical data: Working table dimensions: 2500 x 1100 mm Working table height adjustment: 580 mm Cross travel of working table: 620 mm Sanding shoe dimensions: 150 x 360 mm Belt speed: 9 m/s and 18 m/s Motor power 400 V / 50 Hz / S6 - 40%: 4 kW Table height adjustment motor power: 0.45 kW Drive roller diameter: 250 mm Sanding belt dimensions: 7100 x 150 mm Overall dimensions (L x W x H) in mm: 4040 x 1510 x 1510 mm Extraction port diameter: 140 mm Weight: 420 kg

Condition: excellent (used), FLEXIBLE C.N.C. WORKING CENTER 3 axes (X-Y-Z) Movable panel (workpiece), static working head. Horizontal position of the panel (workpiece) Pjdpfxjfz I Ufe Aa Eoha Numerical Control Xilog Plus 2 (Software Xilog Plus 2) Safety cabin (enclosure) of the working head. Separate electric and command cabinet No. 2 Workpieces fixing clamps (for the panels introduction in the working area) With pushing system to automatically infeed the workpiece In-feeding table (with motorized belts) and Out-feeding table (with motorized belts) Minimum workpieces dimensions (X - Y - Z) mm 250 x 70 x 10 (2 x 5 mm) Maximum workpiece dimensions (X -Y- Z) mm 3000 x 1300 x 80 (2 x 40 mm) Two (2) panels simultaneously processables (in Z axe) WORKING GROUPS (TOP): 2V32, 2H8X/Y2, N2 X-Y90,F2-ETP-6 KW No. 1 Vertical electro-spindle HSK63F (power Kw 7,5) No. 1 Circular Grooving Saw - dia. mm 125 No. 48 Vertical drilling spindles No. 10 Horizontal drilling spindles (8 in X + 2 in Y) WORKING GROUPS (BOTTOM) No. 1 Vertical electro-spindle HSK63F (power Kw 7,5) No. 1 Circular Grooving Saw - dia. mm 125 No. 48 Vertical drilling spindles No. 10 Horizontal drilling spindles (8 in X + 2 in Y) Inserting nozzle and glue injectors. Storage tanks for automatic feeding of the dowels

Condition: new, Year of construction: 2025, Panel Saw Holzkraft / SCM minimax si 4 - 400 / 32 M A With tilting saw blade and sliding table made of anodized aluminium Item number: 5504933 Brand: Holzkraft TECHNICAL DATA Dimensions and Weights Weight (net): approx. 690 kg Dust Extraction Extraction port diameter: 120 mm Saw blade guard extraction port diameter: 80 mm Electrical Data Connection voltage: 400 V Mains frequency: 50 Hz Scoring motor power: 0.65 kW Output power (main motor): 7.0 kW Rated duty cycle (main drive): S6 Duty cycle (main drive): 40% Sliding Table and Worktable Sliding table length: 3200 mm Sliding table width: 360 mm Phodpfx Aasxw N N He Eoa Sliding table height: 175 mm Table length: 1000 mm Table width: 560 mm Table height: 900 mm Saw Unit Cutting width with rip fence: 900 mm Max. crosscut width left of blade: 3200 mm Edging length: 3200 mm Saw blade tilting range: 90 - 46° Max. cutting height at 90°: 136 mm Max. cutting height at 45°: 97 mm Note max. cutting height: independent of scorer Saw blade diameter: 400 mm Note saw blade diameter: independent of scorer Saw blade speed: 3500/5000 rpm Scoring Unit Scoring blade diameter: 120 mm Scoring blade speed: 9200 rpm EQUIPMENT Scoring unit with separate scoring motor Anodised aluminium sliding table Handle for sliding table On/off switch on sliding table for main and scoring blade motors Edging frame Material roller on edging frame Rip fence with round bar guidance Stops: two professional folding stops Edging shoe Excenter clamp Table extension Table width extension Pendulum-type saw blade guard Motorised height adjustment and tilt of saw unit, digital tilt angle display Location: ex stock 54634 Bitburg - immediately available -

Condition: used, Year of construction: 2007, functionality: fully functional, grinding width: 950 mm, grinding height: 170 mm, height adjustment type: electric, type of input current: three-phase, - Italian manufacture - year of manufacture: 2007 - combination sanding shoe TECHNICAL SPECIFICATIONS: - sanding width: 950 mm - sanding height: 4–170 mm - motor power: 11 kW - 1st unit: steel drum with pneumatic engagement Phsdpjxdxfqefx Aa Esa - drum diameter: 110 mm - 2nd unit: combination sanding shoe - pneumatic engagement for rubber drum: 78 Shore - shoe with pneumatic adjustment - pneumatic oscillation - air blast for belts - electric height adjustment - two belt speeds: 8.3 m/s and 16 m/s - electronic sanding height positioning - continuously variable feed speed: 4–20 m/min - minimum material length: 500 mm - extraction nozzle diameter: 2 x 140 mm - machine dimensions (L/W/H): 150 x 180 x 210 cm - weight: ~ 1010 kg

Condition: used, Motor 6 / 7.5 kW Location: Nattheim Phsdpfxew Enw Ie Aa Eoa

Condition: excellent (used), Catalogue number: 7776 TECHNICAL DATA - Shaft width: 520 mm - 4-knife cutter block - Noise-reducing comb - Shaft guard - Table length: 3010 mm - Longer, electrically adjustable infeed table: 1770 mm - Cast-iron tables - Both tables adjustable - Original cast-iron fence, angle adjustable - Electric brake - Extractor connection diameter: 120 mm - Motor: 4 kW - Dimensions (L/W/H): 3010x1000x1400 mm - Weight: 870 kg ADVANTAGES - Italian production - 4-knife cutter block - Overhead control panel - Electric brake - Noise-reducing comb - Longer infeed table - Not repainted - Used surface planer, very good condition, original DTR documentation, CE Phsdpfxjxl Umys Aa Eea Net price: 28,900 PLN Net price: 6,880 EUR (based on 4.2 EUR rate) (Prices may vary with significant fluctuations)

Condition: good (used), Code: 0260 Brand: DMC SCM GROUP Model: UNISAND 2000 - CE Standard Automatic wide belt sander with 2 longitudinal units and 1 transverse unit at the inlet for furniture, joinery, custom-made furnishings, panels, wooden doors, window frames, semi-finished products and various - CE Standard Technical data: Max working width 1350 mm Min working width 52 mm Min length 400 mm Min/max working height 4/170 mm Belt feed with variable speed motor Longitudinal abrasive belt length 1370 x 2620 mm Transverse abrasive belt length 150 x 6550 mm Lamellar belt length 140 x 6300 mm Automatic belt centring Automatic table positioning Digital display of working thickness Control panel with dustproof membrane keyboard Electronic system for belt oscillation Rubber-coated pressure rollers Automatic belt centring 1° Group: Transverse Sanding Pad with development 6550 mm and fitted with a lamellar belt, guarantee of stability and excellent abrasive belt tensioning Sectioned electronic pad "EPICS" with electronic control "HYDRA" with 46 sectors, with centre distance 30 mm A LED screen allows verification of the operation of the activated pad sectors The unit is equipped with blowers for cleaning the abrasive belt 2-speed motor power 12/15 Kw Suction hood diameter 160 mm Combined longitudinal calibrating/sanding group with steel roller and sectioned electronic pad 46-sector "EPICS" with centre distance 30 mm Reading barrier 46-sector Abrasive belt dimensions 1370 x 2620 mm Roller diameter 220 mm Motor power 15/18,5 Kw Oscillating blowers with electronic control Sectioned electronic sanding pad "EPICS" with 46 sectors and centre distance 30 mm Reading barrier 46-sector Motor power 15 Kw Oscillating blowers Scotch Brite satin roller Diameter 150 mm Motor power 3 Kw Suction hood diameter 160 mm Vacuum table Electronic control HYDRA 35 Compressed air 8 bar Overall dimensions of assembled machine mm 3200 x 2,900 x 2400 h Overall dimensions for transport mm 3200 x 2300 x 2400 h Weight kg 4400 Psdpjx Dm Tvofx Aa Esha

Condition: excellent (used), SINGLE SIDE EDGE BANDER (Left) Edges (band in rolls) thickness (Min/Max) mm 0,4 / 3 Edges thickness in strips / lippings (min/max) mm 0,4 / 8 (12)* Panels thickness (min/max) mm 8 / 60 Numerical Control "StarTouch" + "Touch 7" Feeding speed m/min 12-18 Top pressure system with rubber belt (C.N.) Spraying unit (Anti-sticking liquid) AAR In-feed fence, adjustable by N.C. "EASY SIZE PLUS" Pre-milling Unit (vertical joint trimmers) 2 x Kw Lamps to heat the workpieces side Glueing Unit (P.U.R. Glue + Quick Melt system) "VC/800" - "VC/6" + "AirFusion AF15" Band Pressure zone (N.C. adjustment) Edge coils supporting unit - 1 Snipping (end-cutting) K/SEL Rough Trimming unit RS/K Fine Trimming unit RI / 800 (3 pos.) Multi Function Unit (Profile contour Trimming Unit) “4 EDGE” KIT Spraying Unit (for sliding liquid) Profile edge scraping unit RAS/1000 Glue scraper RCA / 2C Milling grooving unit K-100 (1 x Kw 1,8) 90° Hot Air Heater (to reactivate the color of plastic tape) Phodjxlqntepfx Aa Eea Panels Return System "SAG" Mod. SPINNER 47 / 63

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, Technical specifications: Cast iron table dimensions: 905 x 372 mm Number of spindles: 21 Distance between spindles: 32 mm Maximum distance between spindles: 640 mm Maximum horizontal drilling height: 60 mm Maximum tool diameter: ø40 mm Workpiece thickness: 10–85 mm Maximum panel width between arms: 833 mm Maximum drilling head travel: 70 mm Number of clamping holders: 16 Motor power: 400 V / 50 Hz, 1.8 kW (2.5 HP) Motor speed: 2800 min-1 Operating pressure: 5 bar Weight: 320 kg Pedpfx Aaexauw Uj Eeha Pneumatic adjustment of the drilling head vertically and horizontally. Drilling head lockable at 0° – 45° – 90° positions. Standard includes 2 pneumatic clamps for workpiece securing. Drilling height adjustable via handwheel with mechanical display. Drilling depth adjustable via 5-position turret stop.

Condition: new, Sturdy cast steel construction High-precision sizing slide made of anodized aluminium with a travel of 2250 mm Maximum saw blade diameter of 315 mm possible, saw blade can be tilted 45 Large trimming frame (960 x 600 mm) with telescopic aluminum fence that can be extended up to 2660 mm Heavily ribbed dressing work tables made of gray cast iron, re-annealed and stress-free for decades of stability and flatness Helical toothed steel feed roller for even material feed Three milling speeds, manually adjustable Milling spindle with right/left rotation Three independent industrial motors With lockable main switch, motor protection switch, emergency stop switch Dressing table width 410 mm Dressing table length 1810 mm Chip removal max. 4 mm Thicknessing table length 605 mm Thicknessing table width 410 mm Working height min. 3 mm Working height max. 230 mm Podpfx Aaoiiynne Eeha Feed speed 7 m/min Chip removal max. 4 mm Suction nozzle diameter 4 x 120 mm Planer cutterblock type TERSA (3 pcs.) Planer shaft diameter 72 mm Speed 5200 min-¹ Circular saw Edging length 2250 mm Cutting width with rip fence 900 mm Max. Cutting width to the left of the saw blade 2310 mm Saw blade inclination 90 - 45 ° Max. Cutting height at 90° 90 mm Max. Cutting height at 45° 63 mm Saw blade diameter 315 mm Saw blade speed 4000 min-¹ Sliding carriage and table Length of sliding table 2600 mm Spindle diameter 30 mm Speeds 3500/7000/ 10000 min-¹ Milling tool diameter max. lowerable/ not lowerable 180/ 210 mm Power drive motor 3 x 5.0 kW, 400 V, 50 Hz Machine weight approx. 560 kg INCLUDING OPTIONS - Handwheel with gravitational-numerical display for thicknessing table positioning - Sliding carriage length 2600 mm - Professional stops - "TERSA" planer cutterhead - Right-left rotation of the cutter

Condition: excellent (used), Catalogue number: 7775 TECHNICAL DATA - Cutterblock width: 640 mm - Number of knives: 4 pcs - Maximum working thickness: 300 mm – From above: - Anti-kickback fingers - Toothed, pulling, swiveling infeed roller - Pressure bar - Planing cutterblock - Pressure bar - 2 smooth, pulling, rubber-coated outfeed rollers - Digital thickness display - Main motor: 5.5 kW - Electric table lift: 0.7 kW - Variable feed speed: 6–20 m/min Pedpfx Aajxl Umge Esha - Feed motor: 1.1 kW - Dust extraction port diameter: 150 mm - Dimensions (L/W/H): 1000 x 1400 x 1200 mm - Weight: 950 kg ADVANTAGES – Italian manufacture – Electric thickness display – Electric table lifting – Used thickness planer in very good condition, complete with original technical documentation (DTR), CE marking Net price: 31,900 PLN Net price: 7,590 EUR based on 4.2 PLN/EUR (Prices may vary with exchange rates)

Condition: good (used), Code: 0667 Brand: SCM Model: SANDYA UNO/RCS Automatic wide belt sander with 2 belts (Roller + Pad) for furniture, furnishings, wooden doors and windows, doors and various panels Composition: 1° Group steel calibrating roller 2° Group roller + finishing pad Technical data: Working width mm 920 Working height mm 3 - 160 Sanding belt dimensions mm 930 x 1525 N° 2 belt feed speeds mt/min 4,5/9 Main motor power Hp 10 Infeed and outfeed roller conveyors Electric table lifting Working pressure atm 6 Phjdpox A A Duofx Aa Esa N° 2 suction mouths diameter 160 mm Overall dimensions mm 1500 x 1600 x 1700 h Weight kg 1070

Condition: excellent (used), 4-SIDED SIZING-SHAPING LINE (currently for Internal Doors). Phedpfxjwzmbqe Aa Esa Composed by of the following machines: X10023A) Motorized infeed rollers table "CELASCHI"" X10023B) Double End Tenoner "CELASCHI" Mod. TSA 3 B 480 A Installed power KW 65 X10023C) 90° Motorized Transfer ("L-shape") conveyor "CELASCHI" Mod. X10023D) Double End Tenoner "CELASCHI"" Mod. TSA 2 B 360 Installed power KW 60

Condition: new, Year of construction: 2023, functionality: fully functional, DMC SD 30 RCS 110 - Automatic Wide Belt Sander New ex-demo machine, under warranty, has not been used, unpacked from foil Technical Specifications: - Working width: 1,100 mm - Min./max. working thickness: 4/170 mm - Abrasive belt width: 1,115 mm - Abrasive belt length: 1,900 mm Configuration: - Equipped with 1 "R" unit (roller) and 2nd combined "CS" unit (roller/pad) - "C" version for RCS 110: • Pneumatic actuator activating the roller of the first "R" unit • Pneumatic actuator activating the roller of the second "CS" unit • MESAR electronic segmented pad with 20 sections • Electronic adjustment of the worktable height - Compliant with European safety regulations (CE standards) - R120/ steel calibration roller, 120 mm diameter, in first position - R140/65 – 65 Sh rubber grooved roller, 140 mm diameter, in second position - Electronic ammeter for the main motor to monitor power consumption - Electronic display of working thickness Phsdpfx Asw Rpf Nsa Esa - Electronic oscillation of abrasive belts - Rubber pressure rollers - Vertical infeed roller on the first unit to prevent sudden ejection of workpieces - 60 Sh rubber feed belt - Infeed and outfeed support rollers (2 rollers each) - Automatic device for centering and tensioning of feed belt - Main motor power: 11 kW (2 speeds) - Oscillating nozzle system for blowing dust from the abrasive belts of the first and second unit with timer control - Variable feed belt speed via inverter: 0.75 kW (3.5–18 m/min) - “EYE-S” electronic programmer for machines with electronic segmented pads • 10'' touchscreen display

Condition: excellent (used), CATALOG NUMBER 7479 Technical data: - shaft width: 410 mm - 4-knife shaft (TERSA) - noise reduction comb - shaft guard - table length: 2610 mm - longer infeed table: 1435 mm - cast iron tables - both tables adjustable - original cast iron tiltable fence - brake Phsdpfjuwp Ecjx Aa Eja - extraction port diameter: 115 mm - motor: 4 kW - dimensions (LxWxH): 2610x960x1110 mm - weight: 578 kg ADVANTAGES – Made in Italy – 4-knife shaft – brake – noise reduction comb – longer infeed table – unpainted – used surface planer, in very good condition, original DTR documentation Net price: 21,900 PLN Net price: 5,200 EUR (exchange rate 4.2 EUR) (Prices may change depending on significant exchange rate fluctuations)

Condition: excellent (used), Catalogue Number 7780 TECHNICAL DATA SURFACE PLANER: - shaft width: 410 mm - 3-knife shaft - adjustable, tilting fence - table length: 2,060 mm - both tables adjustable THICKNESSER: - max thickness of workpiece in thicknesser: 200 mm - thicknesser shaft guard - from above: - anti-kickback fingers - toothed, driven, swivelling infeed roller - planing shaft - smooth, driven outfeed roller - 2 adjustable rollers in lower table - main motor: 3 kW - 2 feed speeds - dimensions (L/W/H): 2,190 x 800 x 970 mm - weight: 900 kg ADVANTAGES – Italian manufacture – very good condition – used surface planer-thicknesser Net price: 14,900 PLN Net price: 3,550 EUR Podpfx Ajxqyqhja Eeha Net price calculated at an exchange rate of 4.2 PLN/EUR (In case of significant currency fluctuations, the price may change)

Condition: excellent (used), CATALOG NUMBER 7850 Technical data: - Maximum workpiece width: 1100 mm - Maximum workpiece height: 160 mm 2 working units: 1) Grooved rubber calibration roller 2) Grooved rubber roller + pneumatic segmented pad + steel roller - Motor power: 15 kW - Brake - From above: - Split, non-slip rubber feed roller - Working unit - Split, non-slip rubber feed roller - Working unit with segmented pad - Split, non-slip, outfeed rubber roller - Cleaning brush - From below: - 2 non-slip steel rollers - Feed belt - 2 non-slip, outfeed steel rollers - Pneumatic belt oscillation controlled by photocell - Electric table height adjustment - 2 feed speeds - Feed motor power: 0.75 kW - Sanding thickness potentiometer - Working pressure: 8–10 bar - Dust extraction port diameter: 3 x 165 mm - Overall dimensions (L/W/H): 1900 x 1700 x 1930 mm - Weight: approx. 1,502 kg ADVANTAGES – Italian production, SCM brand – 2 working units – Sanding thickness potentiometer – Pneumatic segmented pad – Original paint (not repainted) Pjdpfx Aajx Hhy Se Eoha – Technical documentation (DTR) – Used sander, very good condition Net price: 32,900 PLN Net price: 7,830 EUR Net price calculated at the rate of 4.2 PLN/EUR (price may change in the event of significant exchange rate fluctuations)