Used Scm Compact 23 for sale (571)

Condition: good (used), Year of construction: 1997, functionality: fully functional, Equipment: cabin, 7 Spindle Scm Moulder: Max Working width 230mm Max Working height 160mm Dkodpfstp Dfmex Ahusw Feed Speed 5-40 M/min Diameter of spindles Ø40mm Spindle configuration: 1 Bottom 5.5 Kw 2 Right 5.5 Kw 3 Left 5.5 Kw 4 Top 5.5 Kw 5 Bottom 5.5 Kw 6 Top 5.5 Kw 7 Saws/ Bottom 22 Kw Machine comes with some parts and tools incl 4 New 6 knife spindles Ø163x240xØ40 + One full set of tools on the machine.

Condition: excellent (used), Year of construction: 2011, Four Side Planer SCM Compact NTE - after the technical review - Italian production - year of production 2011 TECHNICAL PARAMETERS: planing width 240 mm planing height 130 mm spindle diameter 40 mm spindle speed 6000 rpm 1 lower spindle 3 kW 2 right spindle 7.5 kW 3 left spindle 5.5 kW 4 upper spindle 6 kW 5 lower spindle 5.5 kW six top pull rollers pneumatic pressure Djdpfx Ahsgyflceuekw adjustable feed on the inverter feed speed range 5-25 m / min adjustable heads table top length 2480 mm electric brakes nozzles diameter 2 x 180 mm and 2 x 150 mm dimensions of the machine (length / width / height) 340/160/170 cm weight 2480 kg

Condition: used, Year of construction: 1994, functionality: unexamined, planing height: 120 mm, planing width: 230 mm, total height: 1,700 mm, total length: 4,600 mm, overall weight: 3,550 kg, Machine with 6 planing shafts bottom-right-left-top-top-bottom Working width max. 230 mm Planing height max. 120 mm Feed speed 5 - 35 m/min. Djdpfov Dx Euex Ahuekw

Condition: new, - NEW-descriptionCutting plane directly on the saw bladeHeavy steel and cast iron constructionPrecision-guided format sliding carriage made of aluminium,anodized as standardLarge-area table extension guided on a telescopic arm andlongitudinally adjustableExtendable aluminum telescopic fence, angle adjustable with professionalstop flapsRip fence with quick release and fine adjustmentLarge work table made of milled gray cast iron stays permanently flatThe standard table extension and table extension enable easy work with larger workpiecesQuiet running and precise cutsEquipped with a powerful three-phase motorThe large dimensioned cast iron sawing unit is attached twice to the cast iron table and guarantees stability, precision, smooth running and a long service lifeMaximum cutting height is also achieved with the built-in scoring deviceEquipment details:Double cradle saw unitGenerously dimensioned, made of steel/cast ironClose to the saw blade, supported on both sides for precision, smooth running and a long service lifeAdjustable in height and up to 45° with a crankMaximum cutting height is also achieved with the built-in scoring deviceAlso available with scoring unittelescopic stopExtendable telescopic stop up to max. 2550 mmAngle adjustableWith professional stop flapsAluminum sliding carriageWith a thousand times proven ball contact systemInsensitive to dust and dirt due to minimal contact point between ball and trapezoidal rail10-year Holzkraft guarantee on wear and tear on the guidewaysRip fence with round rod guideWith fine adjustment and quick releaseStable round rod guide made of ground steel with a diameter of 45 mmCan be folded down as standard for cutting large workpiecesTechnical specifications:Dimensions and weightsWeight (net) approx. 380 kgConnection suctionSuction connection diameter 120 mmSuction connection diameter saw blade protection 60 mmMachine body length 1388 mmWorking area length 1000 mmMachine body width/depth 689 mmWorking area width/depth 2000 mmSpace required length 5118 mmSpace requirement width/depth 3830 mmelectrical dataConnection voltage 400 VDrive motor power 5.0 kWPhase(s) 3 PhNominal operating mode drive motor S6Type of current ACDuty cycle drive motor 40%Mains frequency 50 HzSliding carriage and tableFormat slide length 2250 mmTable length 840 mmFormat sliding carriage width 270 mmTable width 560 mmFormat sliding carriage height 124 mmTable height 900 mmcircular saw unitCutting width with rip fence 900 mmMax. cutting height 90° 90 mmMax. cutting width to the left of the saw blade 2310 mmMax. cutting height 45° 63 mmtrimming length 2250 mmSaw blade diameter 315 mmSaw blade inclination 90 - 45°Saw blade speed 4000 rpmArt. No. 5504323Ausziehbarer Teleskop-fence to max. 2550 mmWinkeladjustableMit Profi-AnschlagklappenAluminium-sliding tableMit tausendfach bewährtem KugelkontaktsystemStaub- and schmutzunempfindlich durch minimalen Berührungspunkt zwischen Kugel and Trapezschiene10 Jahright hand Holzkraft-guarantee on abrasion der Führungsbahnenrip fence with round rod guidingMit fine adjustment and quick clampingStabile round rod guiding aus geschliffenem steel with 45 mm diameterSerienmäßig tiltable for den Zuschnitt großer WerkstückeTechnische Daten:dimensions and Gewichteweight (Netto) ca.   380 kgAnschluss Absaugungsuction nozzle diameter   120 mmsuction nozzle diameter Sägeblattschutz   60 mmAufstellinformationenTransportbreite   900 mmErläuterung required spaceDie d... Dsdpfxjvyuqfe Ahujkw

Condition: good (used), max width of workpiece 230mm max workpiece height 130mm 6 spindles 1) Horizontal bottom 230mm 5.5kW 2) vertical right 130mm + Djdpfxorqzvco Ahuskw 3) vertical left 130mm; (2nd and 3rd spindle) 11kW 4) horizontal top 230mm 7.5kW 5) horizontal bottom 230mm 7,5kW 6) universal 230mm, adjustable 360° 7,5kW

Condition: excellent (used), working width 230mm Dedpfx Aew Afaushuskw working height 120mm 6 heads heads set: bottom/right/left/top/bottom/universal two axes heads regulation spindles diameter 40mm spindles speed 6000 RPM variable regulated feeder digital displays of working dimensions electric regulation of pressure rolls pneumatic pressure of feeding rolls grooved table

Condition: excellent (used), Four side planer scm compact xl Dsdjlat Hdspfx Ahuskw - planing width 23cm - planing height 13cm -electric lifting of the upper head and feed rollers - all spindles adjustable vertically and horizontally - bottom 4kW, right and left from one motor 7.5kw kW, upper 5.5kw universal 5.5kw Machine in very good condition

Year of construction: 2007, condition: good (used), SCM Compact XL four-side planer - Italian production - year of production 2007 TECHNICAL PARAMETERS: planing width 230 mm planing height 120 mm 1) horizontal, lower 230 mm 5.5 kW 2) vertical right 130 mm 3) vertical left 130 mm (2nd and 3rd spindle) 11 kW 4) horizontal, top 230 mm 7.5 kW all spindles up / down, right / left spindle diameter 40 mm from the top 3 introducing rollers, metal, torsion, including 2 double top pulling roller, double rubber pressure 1 pc on the side a rubber pulling roller in the lower table top feed on cardan shafts pneumatic clamps smooth regulation of the feed speed 5-22 m / min 1.1 kW feed motor electric setting of the planing thickness 0.37 kW lifting motor the length of the introducing table top 2470 mm locked in the cabin Dkedpshrdmiefx Ahusw central lubrication of the table top diameter of the extraction nozzle 150 and 180 mm dimensions (length / width / height) 3650/1200/1600 mm weight approx. 1500 kg

Condition: used, Technical data: Max planing width: 230 mm Max planing height: 140 mm Diameter of the spindles: 40 mm Number of spindles: 4 Dkjdpjqv Awiofx Ahusw Order of spindles: bottom 5.5 kW right + left 11 kW top 7.5 kW feed 3 kW Manual adjustment of all heads Number of top steel pulling rollers: 4 Number of top rubber pulling rollers: 1 1 rubber roller in the top Extraction spigot diameter: 130/150 mm Infinitely adjustable feed rate: 4-26 m./min Feed on gimbals Working table lubrication pump Pressure: 6 atm. Electric lifting of the body Power supply: 400 V Overall dimensions: Length: 4180 mm Width: 1720 mm Height: 1740 mm

Condition: ready for operation (used), Year of construction: 1991, The machine is in perfect working condition. Demonstration on site or live video are possible Dkjdpfx Aov T U Rrohusw

Year of construction: 1996, condition: excellent (used), working width 230mm working height 120mm 8 heads arrangement of heads: bottom (grooved)/right/left/right/top/top/bottom/universal head adjustment in two axes spindle diameter 40mm smooth adjustment of the feed speed digital displays of working dimensions electric adjustment of the pressure beam, left and upper heads pneumatic clamps of the pulling rollers grooved top Dkedpslx Ei Rsfx Ahusw

Condition: excellent (used), Year of construction: 2019, operating hours: 9,930 h, functionality: fully functional, machine/vehicle number: AA10001591, travel distance X-axis: 3,770 mm, travel distance Y-axis: 2,585 mm, travel distance Z-axis: 250 mm, rapid traverse X-axis: 35 m/min, rapid traverse Y-axis: 35 m/min, rapid traverse Z-axis: 15 m/min, feed length X-axis: 3,086 mm, feed length Y-axis: 2,185 mm, feed length Z-axis: 150 mm, feed rate X-axis: 35 m/min, feed rate Y-axis: 35 m/min, feed rate Z-axis: 6 m/min, nominal power (apparent): 29 kVA, controller manufacturer: SCM, workpiece length (max.): 3,086 mm, workpiece width (max.): 2,185 mm, workpiece height (max.): 150 mm, total height: 2,190 mm, total length: 5,215 mm, total width: 3,472 mm, table width: 2,185 mm, table length: 3,086 mm, overall weight: 2,800 kg, spindle speed (min.): 1,500 rpm, spindle speed (max.): 24,000 rpm, operating hours of spindle: 2,000 h, spindle motor power: 10 W, number of spindles: 1, number of slots in tool magazine: 19, input voltage: 415 V, type of input current: AC, Equipment: documentation/manual, rotational speed infinitely variable, Brand and Model: SCM MORBIDELLI N100 22-31 C Serial Number: AA10001591 Year of Production: 2019 Condition: Excellent Location: Northern Ireland Almost as new condition and well maintained In full working order and still in use Includes many extras for a cost free set-up Financial information VAT: The price shown is exclusive of VAT which is not applicable for purchasers outside the UK Duty: Shipments from Northern Ireland to the EU are excempt from customs and duty Price: As seen and excludes any moving of the machine or preparation for shipping Machine Specification: High Performance aluminium worktable 8 rectractable stops NC managed Two vacuum fields half and full table Vacuum cup set Automatic centralised lubrication system 2 off Becker 250/300 m3/hr vacuum pumps 9.5KW spindle 1500-24000 rpm with left and right rotation HSK F 63 quick release toolholder With exhaust hood for spindle 4 off air blowers on the spindle 1 off lateral pickup for aggregate tool High capacity toolholder with 19 places Dkedpfx Ahew Nyd Tsusw F12L drilling head comprising 4xleft and 4xright spindles 1off X and 1off Y double drilling heads 1off integrated blade in x axis Drill head complete with exhaust hood Bit speed 4500rpm 60mm stroke Blade 5500rpm Tool length detection system "Tecpad" wired remote control with 7 inch touch screen colour Eye-M PC integrated touchscreen control station Maestro CNC with 2 off dongles Extras include in price: Ducting for the machine to an extraction unit Switchgear and cables Tooling approx 20 HSK 63F ER32 holders plus collets 4 off EMST extract max tool holders PCD cutters Skimming tool Maestro nesting Alphacam 1 seat Full original documentation is available Also available: Extraction system to suit €4000 Compressor to suit €4500 Panel lifting unit to suit €12000

Condition: used, functionality: unexamined, Ferwood Code: RS0000797 - Manufacturer Code: 2987540023L - Condition: Used - Functionality: Not tested - Compatible Machine: CNC SCM - If interested we offer a revision service, contact us. Dkedpevvad Nofx Ahuew

Condition: reconditioned (used), Year of construction: 2005, through feed moulder with 9 spindles and SCM control 100 PC control system Max. Working width 240 mm Min. Working width 25 mm Max. Working height 120 mm Min. Working height 10 mm Min. Work piece length 640 mm feed speed 6 - 36 m/ min, variabel Spindle DM 40 mm Usable length vertical spindles 140 mm Usable length horizontal spindles 250 mm Axial adjustment vertical spindles 0 - 80 mm Axial adjustment horizontal spindles 0 - 45 mm Min and max. Tool DM 100 - 220 mm Min. And Max. Tool DM on planer spindle 120 - 140 mm Profiling capacity of 2. Bottom horizontal spindle with tool DM 200 mm = 15 mm Power feeder motor 5,5 kW DM feeder rollers 140 mm Infekt table length 2500 mm Quick adjustment indeed table and fence 10 mm Required suction capacity 7500 m3/ h Compressed air requirement 6 - 10 bar Weight approx 6000 kg Dimension approx. L x W x H = 6300 x 1620 x 1655 mm Spindle arrangement: Bottom horizontal spindle Motor 11,0 kW Spindle Speed 6000 RPM Right vertical spindle Motor 7,5 kW Spindle Speed 8300 RPM Left vertical Spindle Motor 7,5 kW Spindle Speed 8300 RPM 2. Right vertical spindle Motorleistung 7,5 kW Wellendrehzahl 8300 RPM 2. Left vertical spindle Motor 7,5 kW Spindle Speed 8300 RPM Top horizontal spindle Motor 11,0 kW spindle speed 8300 RPM Dkodpeg Umrmsfx Ahuew 2. Bottom horizontal spindle Motor 12,0 kW spindle speed 8300 RPM 2. Top horizontal spindle Motor 11,0 kW spindle speed 8300 U/min 3. Bottom horizontal spindle Motor 7,5 kW spindle speed 8300 U/ min SET - UP quick set up system reduces down times Power Lifting of the feed system and upper spindle units with 100 PC control Pneumatic opening of safety hood full Kardan feed system Feed speed variable Segmented pressure shoe before upper horizontal spindle with parallelogram movement and pneumatic pressure Fine adjustment of outfield table Pneumatic blocking of spindle in working position incl. ZIWO CL 15 automatic feeding unit Advise used machines: • Technical data without obligation, mistake and intermediate sale reserve. • Price is considered ex-location price • All articles or machines are bought as seen without any entitlement on warranty. • It is left to the choice of the buyer to view the machines before at its location. • Special arrangements are possible but only valid in written form. (We answer your inquiries only with stated address + telephone number!)

Condition: ready for operation (used), Year of construction: 2019, functionality: fully functional, machine/vehicle number: AA10001621, travel distance X-axis: 3,086 mm, travel distance Y-axis: 2,185 mm, travel distance Z-axis: 150 mm, rapid traverse X-axis: 35 m/min, rapid traverse Y-axis: 35 m/min, rapid traverse Z-axis: 15 m/min, feed length X-axis: 3,770 mm, feed length Y-axis: 2,585 mm, feed length Z-axis: 250 mm, feed rate X-axis: 35 m/min, feed rate Y-axis: 35 m/min, feed rate Z-axis: 6 m/min, nominal power (apparent): 29 kVA, controller manufacturer: SCM, workpiece height (max.): 150 mm, rotational speed (min.): 1,500 rpm, rotational speed (max.): 24,000 rpm, overall weight: 2,550 kg, spindle speed (min.): 1,500 rpm, spindle speed (max.): 24,000 rpm, distance between spindles: 32 mm, spindle motor power: 9,500 W, number of spindles: 1, number of slots in tool magazine: 20, tool length: 160 mm, tool diameter: 160 mm, input voltage: 400 V, type of input current: three-phase, Equipment: chip conveyor, documentation/manual, SCM MORBIDELLI N100 22-31 C – CNC Milling and Drilling Machining Center Brand and Model: SCM MORBIDELLI N100 22-31 C Serial Number: AA10001621 Year of Production: 2019 Condition: Excellent Location: Croatia Technical Specifications: Working Area (X x Y x Z): 3086 x 2185 x 150 mm Vacuum Table: High Efficiency Multipurpose Aluminum Table (HE) Vertical Drilling Head: 12 Spindles (7X / 5Y), 8000 rpm Horizontal Drilling: 3 Units (2X + 1Y), 8000 rpm Integrated Saw (X-Axis): Ø125 mm, 10000 rpm Main Milling Spindle: 9.5 kW (13 HP), HSK 63F, 24000 rpm Tool changer: 20 positions (19 at the rear + 1 in the cabin for quick change) Vacuum pumps: 2 x 250/300 m³/h Dust extraction: 5300 m³/h + 3400 m³/h for unloading pusher, Ø250 mm Machine weight: approx. 2550 kg Total installed power: 23–28.5 kW Control and software: Control via Xilog Maestro system + Eye-M PRO console Industrial computer with Windows Embedded 7 operating system Dsdpfx Ahswtdt Ueuskw 21.5" touch screen Included nesting optimization module and additional software licenses Built-in accessories: 1. Automatic tool length measuring device 2. TECPAD remote control with 7” touch screen 3. Lateral pick-up for additional tools 4. F18L doweling machine with RO-AX system 5. Two-field positioning for work in two working zones (A + D) 6. Automatic central lubrication 7. Air blowing and micro-lubrication system for processing demanding materials (e.g. aluminum panels) 8. Vacuum cup set 9. Automated unloading system: pusher + conveyor belt 10. Predisposition for automatic loading device 11. Interpolating vector axis with digital control for the 4th axis The machine has been used exclusively in professional conditions, regularly maintained and fully functional. Ready for immediate use in industrial production.

Condition: ready for operation (used), Year of construction: 2018, functionality: fully functional, machine/vehicle number: AH / 121500, table width: 1,290 mm, table length: 2,570 mm, overall weight: 2,522 kg, Equipment: CE marking, TECHNICAL DETAILS Table Table length: 2,570 mm Djdpfoxrluujx Ahuskw Table width: 1,290 mm MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 3,870 x 1,900 x 2,300 mm Weight: 2,522 kg EQUIPMENT CE marking

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, working width: 305 mm, planing height: 200 mm, spindle diameter: 40 mm, planing width: 305 mm, working height: 200 mm, total width: 320 mm, total height: 1,712 mm, total length: 5,260 mm, spindle speed (max.): 6,000 rpm, input voltage: 440 V, tool diameter: 165 mm, shaft diameter: 40 mm, number of spindles: 6, power: 78 kW (106.05 HP), The machine was purchased in 2006 new it is in very good working order. Dkjdoxn Um Sspfx Ahuew If customer wishes it can be seen working.

Condition: used, Year of construction: 1995, 1500mm trolley Cutting guide 1280mm Stop length 2690mm Dodpfxoxt Iqhs Ahuekw Cutting height 80mm 45° tilting blade Engine braking No incisor!!! 380V

Condition: excellent (used), Year of construction: 2019, operating hours: 613 h, functionality: fully functional, machine/vehicle number: AH00001133, feed rate X-axis: 18 m/min, power of the buffing unit: 260 W, workpiece height (max.): 45 mm, edge thickness (max.): 3 mm, power of the milling unit: 1,500 W, overall weight: 1,746 kg, type of input current: AC, compressed air connection: 6 bar, height adjustment type: mechanical, input voltage: 415 V, power: 20 kW (27.19 HP), input current: 48 A, input frequency: 50 Hz, Manufacturer: SCM Model: Olimpic K560R Year:2019 Condition: Excellent. Lightly used and currently used in manufacturing Availability: End Oct 2025 Location: Northern Ireland Dsdpfx Aew Nyqaohuekw Financial Information: VAT: This will be charged to UK companies only Duty: There is no customs or duty selling into the EU from Northern Ireland Price: This is as seen and does not include preparing the machine for transport Machine Specification: If you want to run Airtec (Airfusion) PU and EVA then this is the machine for you. This is a fully specified K560 with many extras. Everything you need to put it into production quickly is included. Please read the full description. Track Speed 12-18mm Panel Thickness 8-60mm Max Edge thickness Strips 6mm Max Edge Thickness Coil 3mm Coil plate diameter 780mm Distance between two panels 600mm Min Panel Length 140mm Min Panel Width 100mm Work height 900mm Machine length: approx. 4950 mm Autoset: Automates the machine set up when changing work (e.g. changing from 1st to 2nd passage) Pre-Milling: 2 off high freq motors Max removal 3mm Infra-red Ceramic Lamps: The heat the panels before gluing AAR anti-adhesive unit: Prevents adhesive sticking to the upper and lower panel surfaces SGP - Special Glue Pot: Machine configured for BOTH EVA and PU glue Airfusion +E unit: Hot air application of pre-coated edge band to avoid the use of glue K/SEL end trim unit: 2 high freq motors 0-15 deg adjustment of cutting angle RK trimming unit: 2 high frequency motors ROUND X Rounding unit: Twin high frequency motor corner rounding RAS/K edge scraping unit: For rounded edge scraping post machining RCV glue scraping unit: Top and bottom scraping to remove excess edge band and glue SPV brushing unit with spray: removes glue and polishes edging and boar Spray mist device for delicate edges: Allowing the processing of high gloss edging StarTouch electronic control: Touch sensitive control panel Extras included in the price: Leitz pre-milling tooling blocks – Brand new – never used Ducting – The ducting to connect to the extraction Ostermann edge band cassette – For quick change of the edging Pens and wax cabinet on wheels – For any repair needs Electrical cables and switchgear – Allows you to connect up the machine on delivery Optional extras: Extraction system to suit €4000 Compressors to suit €4500 each

Condition: ready for operation (used), Year of construction: 2011, functionality: fully functional, machine/vehicle number: PRATIX Z2-27, travel distance X-axis: 2,700 mm, travel distance Y-axis: 1,300 mm, travel distance Z-axis: 180 mm, rapid traverse X-axis: 60 m/min, rapid traverse Y-axis: 60 m/min, overall weight: 2,000 kg, spindle speed (min.): 24,000 rpm, number of slots in tool magazine: 10, input voltage: 400 V, type of input current: three-phase, Equipment: documentation/manual, rotational speed infinitely variable, Description TECHNICAL SPECIFICATIONS PRATIX Z2-27 AXES Usable working area X-Y-Z * 2,700-1,300-180 mm Axis travel X-Y-Z 3,060-1,735-250 mm Vectorial speed X-Y 60 m/min WORK TABLE Type MF Alu grid table 1,225 – 2,750 Vacuum pump Becker 250m3 DRILLING UNIT F12 Vertical drills No.-rpm 12 (7X-5Y) – 4,000 Dkedpfxjxgdc Hs Ahuew MILLING MOTOR Power kW (HP) 7.5(10) Min - Max spindle speed rpm 1,500 – 24,000 Tool magazine in table No. 10 positions Installed power KVA 23÷28.5 Total machine weight 2,800 kg Price excluding VAT and tools

Condition: used, Wide belt sander SCM Sandya 10S M2 110 Built in 1999 Sanding belt dimensions 2620x1115mm 380V 1st sanding unit Contact roll 180mm Engine 18.5kW 2nd sanding unit Combi aggregate with sanding pad Engine 11kW Djdpfxownh A As Ahuskw Sanding width max 1100mm Sanding height Min/max 4/170mm Throughput speed 4.5-9 m/mins Dimensions 2300x2205x2500mm, weight 1850kg - Documentation available: No - Number of units [pcs]: 2 - └ Unit 1: - - Type of unit: Contact roller - - Roller diameter [mm]: 180 - - Motor power [kW]: 18.5 - └ Unit 2: - - Type of unit: Combi - - Sanding belt length [mm]: 2620 - - Sanding belt width [mm]: 1115 - - Motor power [kW]: 11 - Max. working width [mm]: 1100 - Min. working height [mm]: 4 - Max. working height [mm]: 170 - Min. feed speed [m/min]: 4.5 - Max. feed speed [m/min]: 9 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Year of construction: 2011, total length: 4,000 mm, total height: 1,600 mm, total width: 970 mm, Weight: 1.300 kg Price: On request Dkodpfx Aewnickshusw - Year: 2011 - Documentation available: No - CE marking present: Yes - Serial number: AH/115214 - Number of units [pcs]: 6 - └ 1st unit type: Pre-milling unit - └ 2nd unit type: Glue unit - └ 3rd unit type: Cap unit - └ 4th unit type: Rough milling unit - └ 5th unit type: Radius scraping unit - └ 6th unit type: Flat scraping unit - Max. edge band thickness [mm]: 6 - Max. panel thickness [mm]: 60 - Min. panel length [mm]: 140 - Max. feed speed [m/min]: 11 - Voltage [V]: 400 - Current consumption [A]: 23 - Transport dimensions: 4000mm x 975mm x 1600mm (l x w x h) - Transport weight [kg]: 1300kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Year of construction: 2020, total height: 2,500 mm, total length: 5,000 mm, total width: 2,400 mm, Empty weight: 2.500 kg CNC machining centre SCM Morbidelli N100 12 A Brand SCM Type Morbidelli N100 12 A Year of construction 2020 Serial number AM00002846 Machining table dimensions 2486x1255 mm (LxW) Groove pattern 40 mm distance Distance between holes vacuum cups 120 mm Equipped with 3 reference gauges Table has 1 vacuum field Table working range X axis 2486 mm Y axis 1255 mm Z-axis 150 mm Stroke of the units X axis 3120 mm Y axis 1685 mm Z axis 250 mm Movement of the axes  Maximum vectorial speed in rapid traverse XY axis 35 m/min Stroke of Z axis 250 mm Panel pass 150 mm Hiteco milling unit Motor power 5.5 kW (7.5 HP) Tool holder HSK-63-F Milling spindle speed 1500-24000 rpm Tool changer 8 positions Central exhaust connection 250 mm Control unit Windows EmbeddedStandard 7 64 bit  21.5 LCD touch screen XILOG-MAESTRO software package  Including vacuum pump Capacity 250 m3/h Power 5.5 kW Max. vacuum 0.9 bar Noise level 81 db (A) Dodpewwa Hljfx Ahuokw Total dimensions 5000x3000x2500 (LxWxH) Total weight 2500 KG - Year: 2020 - Documentation available: Yes - CE marking present: Yes - Serial number: AM00002846 - Transport dimensions: 5000mm x 2400mm x 2500mm (l x w x h) - Transport weight [kg]: 2500kg Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Glenn Smeets

Condition: used, Year of construction: 2004, Note: Screen is defective. Both saws can be operated from the screen. The other axes do not respond (height, rear tilting fence). - Year: 2004 - Documentation available: No - CE marking present: Yes - Serial number: AB/167923 Financial information Dksdpfx Ahsxruqlouew VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Year of construction: 2004, total length: 3,600 mm, total width: 1,800 mm, total height: 1,750 mm, Weight: 970 kg Dkjdpfx Ahexdlxksusw Price: On request - Year: 2004 - Documentation available: No - Serial number: AB/166667 - Roller table length [mm]: 3200 - Table width [mm]: 1040 - Min. saw blade diameter [mm]: 300 - Max. saw blade diameter [mm]: 400 - Options: Scoring unit - └ Spindle speed pre-cutter [rpm]: 8500 - Spindle speed: - └ Min. spindle speed [rpm]: 3000 - └ Max. spindle speed [rpm]: 5000 - Voltage [V]: 400 - Current consumption [A]: 18 - Transport dimensions: 3600mm x 1800mm x 1750mm (l x w x h) - Transport weight [kg]: 970kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels