Used Schell Mäharbeit Factory for sale (1,764)

Condition: new, weight max. in kg 2500 kg Working height minimal 350 mm Working height maximum 1850 mm max. torque 3000 Nm 0 1 U/min adjustment speed vertikal 560 mm/min vertical adjustment 1500 mm baseplate diameter 600 mm rotation movement 0,75 kW stroke drive 1,85 kW height of the plant 2505 mm weight 1160 kg Sideros Engineering Head & Tailstock Positioners are used to weld and assembly long and large weldments in many different application fields. Besides the benefits of ergonomics and safety during welding and assembly applications, the Hsdsvw Du Uopfx Afnefc revolutionary feature of Syncrolift is the compactness and the portability of both columns, thanks to their dedicated hydraulic jacks. The result is an extreme flexibility in the factory. Syncrolift features two main axis: Electrical elevation/descent, and Electrical 360° left/right rotation. Due to its special design, the column positioner can process very large components. Higher columns (+500/+1000/+1500 mm) for processing components with larger dimensions are available. Special equipment: Double-sided lifting drive, guide rails in 2 m segments, wireless handheld control unit, TCS program control, etc. Thanks to the movable columns, the length of the different workpieces can vary between 1 m and over 20 m. Depending on the weight and dimensions of the component, positioners with load capacities of max. 2,500 kg to max. 40,000 kg are available. Advantages: Improved Safety Proper Ergonomics Improved weld quality Cost savings and profit increase Welding/Assembly procedures repeatability Machine Features: Master and idler column with rotating mounting plates Pallet jacks for column lifting and relocating Servo-motor, ball screw and encoder control for Up & Down motion Servo-motor, gear reducer and encoder control for Rotation LCD display for positioning set up, safety thresholds setting and diagnostic Automatic load leveling Redundant safeties - servo motor brake, ball screw thread geometry and mechanical Stopper Low maintenance 240/480/600 Volt - 3 phase - 60 Hz In order to configure the system precisely to meet the requirements, we must obtain all relevant information about the workpieces to be processed for the manufacturer's technical office. There we have a list of questions for this purpose.

Condition: new, fuel type: diesel, overall weight: 1,600 kg, empty load weight: 1,600 kg, Year of construction: 2024, GÜNTER GROSSMANN GG1600 MINI GRAAFMACHINE 3 cylinder KUBOTA Günter Grossmann GG1600 kubota Thanks to a close cooperation between Günter Grossmann and Kubota, the new GG1600 excavator was created. Günter Grossmann GG1600 crawler excavator. Mini crawler excavator GG1600, Hodsggai Uepfx Afnofc KUBOTA engine, KDK hydraulic pump, VS EATON compressor motor. Very good quality. Standard equipment Excavator bucket 400mm Additional accessories for the machine can be purchased. Model GG1600 is a great machine for the most demanding construction, electric and hydraulic companies. We guarantee service after warranty. The excavator is manufactured on the basis of solid European technology SPECIFICATIONS Model: GG1600Y Brand: Günter Grossmann Weight: 1600kg Bucket capacity: 0.045 m³ / 200kg Engine: KUBOTA Engine power: 15 kw/2300r/min Main pump: Japan - KDK Japan Swing motor: American - EATON USA Driving motor: Korea - KOREA DONGHYUN OPERATING RANGE Max digging depth: 1650 mm Max. vertical digging depth: 1650 mm Max. digging height: 2610 mm Rotation radius: 360 optional extra ACCESSORIES Auger Grapple Digging tine Rake Narrow bucket 200 mm Narrow Bucket 380mm Leveling bucket 500mm Leveling bucket 800mm Quick coupling Breaker GG1600 13,400 euro ex vat GG800 Bn83wivh 5900.00 euro incl vat 7139.00 euro incl vat GG1000 9909.00 euro incl vat 8190.00 euro ex vat transport costs on request We deliver to companies and individuals in the Netherlands and Belgium! With every delivery you will receive a VAT invoice and (factory) warranty. -Click on 'e-mail this advertiser' and state your contact details and we will send you the webshop details. -telephone (7 days a week from 8.00 to 23.00) -Pick up is possible by appointment, also in the evenings and weekends. Easy payment ... -through our webshop -Cash or debit card at pickup/delivery -Via iDeal. (request a link through the mail) for the GG 800 data look at our other ad more info please call or mail us Lease negotiable

Condition: excellent (used), Mobile plasticiser for press processing of thermoplastics Manufacturer: KMH Type: 60 S Hydraulics PN: 150 bar Pn: 16,5 kW P heating: 8 kW 400 V Single STW 150/1-3-10-K  Temperature control unit  3.9 kVA Heating capacity 3 kW 380 V Hydraulic pump Hfedpfsg H I Nxox Afnec Complete factory closure, large selection of storage platforms, pallet racks, shelf racks, paternosters. High-quality industrial machines, lathes, grinding machines, hand machines. Financing through our bank is also possible. komplett-konzept.leasingo.de Further articles - new and used - you will find in our shop! International shipping costs on request!

Condition: used, - Used CRISTAL FM 2 Rotary Gas Oven 600x800 - Dimensions (WxDxH): 1950x2760x2480 mm - 2 oven racks: 600x800 mm - Serial No.: 0008319 - Year: 23-02-2002 - Baguette capacity (250g): 144 - Bread capacity (400g): 90 - Door opening (WxH): 800x1850 mm - Rack height: 1820 mm Hedpeyhfixofx Afnefc - Voltage: 380V - Electrical power: 4 kW - Heating power: 77 kW - Net weight: 1100 kg - Burner at the top - Sold with gas burner - Overhauled equipment: The equipment is serviced upon order; lead times for availability and return are agreed at that time (please request pricing after overhaul). Cristal Range: - Ovens in the Cristal range are rotary rack ovens designed for bakery and pastry applications. - The even circulation of hot air combined with the rotary motion of the rack ensures excellent baking quality and consistency for all production types: fresh, raw, frozen, and par-baked frozen. - Rapid heat-up makes this oven a flexible solution to optimize production according to sales cycles. Range Features: - The FM2 model accommodates 600x800 mm baking trays. - The heat exchanger in FM1 and FM2 ovens can be positioned at the rear, right, or left of the baking chamber. Performance, Responsiveness, and Versatility: - For gas and oil-fired versions, the heat exchanger is made of refractory stainless steel. Dksdsyhfixecu Ti Eneh - The design and materials of the exchanger ensure perfectly even baking across all levels of the rack. - Its specific section allows optimal heat exchange for outstanding performance and efficiency. - Air circulation inside the baking chamber is provided by three vertically aligned stainless-steel turbines, each 300 mm in diameter, located at the rear of the oven. - Air drawn in by the turbines is heated on contact with the exchanger and distributed evenly through the distribution slots in the baking chamber. - Operation of this oven is particularly straightforward, with no complex adjustments required (settings are factory pre-set).

Condition: used, Cooling unit cooling water cooler ARO type VWK 31/1-S Factory number year of manufacture 2007 Hfedpfxsvw A T No Afnsc Cooling capacity 3500 watts Ambient temperature max. 32°C Refrigerant R407C Refrigerant filling quantity 0.98 kg Operating pressure of cooling compressor max. 29.5 bar Water tank capacity approx. 8 liters Discharge volume of circulation pump 27 liters/min. (1620 liters/h) Water connections quick release coupling Rectus type 26 Power connection 230 volts, 50 Hz, 2.2 kW - Temperature setting via DANFOSS thermostat controller - Built-in circulation pump (250 watts) Space requirement L x W x H 700 x 550 x 520 mm Weight 75 kg Good condition

Condition: excellent (used), mileage: 124,471 km, fuel type: diesel, axle configuration: 8x2, fuel: diesel, color: blue, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, Year of construction: 2018, Equipment: ABS, AdBlue, air conditioning, central locking, crane, cruise control, electric window regulation, fog lights, navigation system, parking heater, power mirror, soot filter, spoiler, trailer coupling, = Additional Options and Equipment = - Aluminum fuel tank - Low noise Hfedpfx Afsyiuq Ionsc - Speed limiter - Refrigerator - LED lights - Air suspension - Air horn - Particulate filter - Sun visor - Stability control - Auxiliary heater - Toolbox - Power take-off (PTO) - Towing jaw = Additional Information = General information Year of manufacture: 2018 Transmission Gearbox: I-SHIFT, automatic Axle configuration Front axle 1: Steered Front axle 2: Steered Rear axle 1: Twin wheels Rear axle 2: Lift axle; steered Weights Unladen weight: 30,455 kg Functional Mast: telescopic (14 sections) Mast length: 36 m Lifting capacity: 26,180 kg Lifting height: 3,600 cm Crane: EFFER 1855/8S + JIB 6S HEAVY DUTY, behind the cab Superstructure brand: EFFER 1855/8S + JIB 6S HEAVY DUTY CE marking: yes Condition Technical condition: very good Visual condition: very good Financial Information Price: Upon request VOLVO FH 650 8X2 TRUCK-TRACTOR COMBINATION WITH EFFER 1855/8S CRANE + JIB 6S HEAVY DUTY + WINCH EURO 6 | PACKAGE 650 HP DRIVE 8X2 LAST AXLE LIFTED AND STEERED 10-TONNE FRONT AXLE WHEELBASE 510 CM AIR SUSPENSION FH SLEEPER CAB WITH FULL EQUIPMENT AIR CONDITIONING, AUXILIARY HEATER, NAVIGATION, FRIDGE, MICROWAVE I-SHIFT AUTOMATIC GEARBOX COMPLETE INNERLINER CHASSIS FROM FACTORY TRACTOR-TRAILER COMBINATION TRUCK ADJUSTABLE FIFTH WHEEL + TRAILER COUPLING MANY TOOLBOXES EFFER 1855/8S CRANE + JIB 6S HEAVY DUTY + WINCH 2X OIL COOLERS FOR CRANE HYDRAULICS TOTAL 14X HYDRAULIC EXTENSIONS + 3 MANUAL MAX WORKING HEIGHT 36 METERS!! MAX LIFTING CAPACITY 21,180 KG MAX LIFTING CAPACITY AT 31.94 METERS 1,640 KG 5th + 6th FUNCTION ON JIB CRANE CAN WORK IN FRONT OF THE CAB USING FRONT OUTRIGGER 5X OUTRIGGERS LARGE HYDRAULIC WINCH WITH HOOK AND ROLLERS RADIO REMOTE CONTROL PREPARED FOR REMOVABLE COUNTERWEIGHT FLATBED FOLLOW US ON INSTAGRAM, FACEBOOK AND TIKTOK TO SEE OUR VIDEOS OF TRUCKS/COMMERCIAL VEHICLES AND MACHINERY FOR SALE WE SPEAK GERMAN WE SPEAK ENGLISH HABLAMOS ESPANOL

Condition: used, mileage: 231,230 km, power: 478 kW (649.90 HP), first registration: 06/2016, fuel type: diesel, tire size: 385/65/22.5, axle configuration: 8x4, fuel: diesel, brakes: engine braking, color: green, driver cabin: sleeper cab, gearing type: automatic, number of gears: 12, emission class: euro6, suspension: other, Year of construction: 2016, operating hours: 9,116 h, Equipment: AdBlue, EBS, air conditioning, central locking, crane, cruise control, differential lock, electronic stability program (ESP), fog lights, navigation system, onboard computer, parking heater, power assisted steering, soot filter, trailer coupling, = Additional Options and Accessories = - Rear working lights - Power brake booster - Speed limiter - Air conditioning - Refrigerator - Air horn - Particulate filter - Beacon light - Reversing camera - Disc brakes - Sun visor - Stability control - Auxiliary heater - Immobilizer - Toolbox - PTO (power take-off) - Central lubrication system - Towing hitch = Further Information = Transmission Transmission: I-SHIFT, 12 speeds, automatic Axle Configuration Brakes: Disc brakes Front axle 1: Tire size: 385/65/22.5; Max. axle load: 10,000 kg; Steering axle; Suspension: leaf spring Front axle 2: Tire size: 385/65/22.5; Max. axle load: 10,000 kg; Steering axle; Suspension: leaf spring Rear axle 1: Tire size: 315/80/22.5; Twin tires; Differential lock; Max. axle load: 13,000 kg; Reduction: external planetary axles; Suspension: air suspension Rear axle 2: Tire size: 315/80/22.5; Twin tires; Differential lock; Max. axle load: 13,000 kg; Reduction: external planetary axles; Suspension: air suspension Weights Curb weight: 29,975 kg Hsdpfx Afeyiuquonjfc Payload: 14,025 kg Gross vehicle weight: 44,000 kg Functionality Boom: Telescopic (14 sections) Boom length: 35 m Lifting capacity: 32,000 kg Body make: PALFINGER PK 165002 G TEC 7 + JIB PJ240 E CE certified: Yes VOLVO FH 650 8X4 WITH PALFINGER PK 165002 G TEC 7 CRANE + JIB PK 240 E DPC-C + WINCH EURO 6 L PACKAGE 650 HP DRIVE: 8X4 WHEELBASE: 470 cm LEAF / AIR SUSPENSION 10-TON AXLES FH CAB WITH FULL EQUIPMENT: AIR CONDITIONING, AUXILIARY HEATER, NAVIGATION LEATHER, REFRIGERATOR, REVERSING CAMERA DYNAMIC STEERING I-SHIFT AUTOMATIC GEARBOX VOLVO ENGINE BRAKE COMPLETE INNERLINER CHASSIS FROM FACTORY TRACTOR UNIT, WARNING LIGHTS, AIR DEFLECTORS TOOLBOXES, TRAILER COUPLING PALFINGER PK 165002 G TEC 7 CRANE + JIB PJ 240 E DPS-C 165 T/M CRANE!!! OIL COOLER FOR CRANE HYDRAULICS 14X HYDRAULIC EXTENSIONS MAX WORKING HEIGHT: 35 METERS!! MAX LIFTING CAPACITY: 32,000 KG MAX LIFTING CAPACITY AT 31 METERS: 1,600 KG CRANE CAN OPERATE 100% IN FRONT OF THE CABIN VIA 1X FRONT OUTRIGGER A TOTAL OF 5X OUTRIGGERS LARGE HYDRAULIC WINCH WITH ALL HOOKS AND PULLEYS RADIO REMOTE CONTROL NUMEROUS TOOLBOXES LATEST CONTROL ELECTRONICS: PALTRONIC 150 SAFETY AND COMFORT FEATURES WITH OVERLOAD PROTECTION STABILITY MONITORING (HPSC) HIGH PERFORMANCE LIFTING SYSTEM (HPLS) ACTIVE VIBRATION DAMPING (AOS) DUAL POWER SYSTEM PLUS (DPS PLUS) FOR FLY JIB OPERATION FOLLOW US ON INSTAGRAM: GEURTSTRUCKS WE SPEAK GERMAN WE SPEAK ENGLISH HABLAMOS ESPAÑOL

Condition: excellent (used), mileage: 25,460 km, power: 345 kW (469.07 HP), first registration: 11/2021, fuel type: diesel, fuel: diesel, color: orange, gearing type: automatic, emission class: euro6, Year of construction: 2021, Equipment: AdBlue, crane, = More options and accessories = - Power Take-Off (PTO) = Further information = Gross Vehicle Weight (GVW): 32,000 kg CE marking: yes Technical condition: very good Visual condition: very good VOLVO FH 460 8X4 TRACTOR-TRUCK COMBINATION WITH CRANE PREPARATION!!!!! FOR HIAB 858 + JIB NO CRANE INCLUDED!!!! EURO 6 L PACKAGE, 460 HP DRIVELINE: 8X4 WHEELBASE: 515 cm AIR SUSPENSION FH CAB WITH AIR CONDITIONING AND AUXILIARY HEATER I-SHIFT AUTOMATIC TRANSMISSION FULL INNER LINER CHASSIS FROM FACTORY TRACTOR-TRUCK COMBINATION ADJUSTABLE FIFTH WHEEL THIS TRUCK IS PREPARED WITH SUBFRAME FOR HIAB 858 + JIB COMPLETE WITH POWER TAKE-OFF, REAR STABILIZERS, HYDRAULIC TANK CRANE CAN BE INSTALLED – JUST BOLT ON AND IT'S READY TOOLBOXES REMOVABLE BALLAST PLATFORM WITH REMOVABLE ALUMINIUM SIDE BOARDS Hjdpfsyiukbsx Afnsfc 475 cm LENGTH LASHING EYES FOLLOW US ON INSTAGRAM: GEURTSTRUCKS WE SPEAK GERMAN WE SPEAK ENGLISH HABLAMOS ESPAÑOL

Condition: new, Year of construction: 2020, functionality: fully functional, machine/vehicle number: BH6725-BH1001, tank capacity: 1,000 l, Equipment: documentation/manual, BRINOX 1,000 L Pre-Fill Vessel – 1.4435 – Double Jacket – PED Cat. IV Module G – TÜV – FAT – 2020 – As New Manufacturer: BRINOX d.o.o. Type: SVMMBI-1000 Tag No.: BH6725-BH1001 Serial No.: 1003455 Year of manufacture: 2020 CE Marking: CE 0036 Condition: As new / unused TECHNICAL SPECIFICATIONS Product type: Pre-fill / process vessel Nominal volume: 1,000 L Total volume: 1,400 L Empty weight: 762 kg Product contact material: 1.4435 Permissible pressure (PS): -1 / +3 bar Test pressure (PT): 5.4 bar Permissible temperature (TS): -10 / +150 °C Fluid group: 1 Design according to AD 2000 Pressure vessel compliant with PED 2014/68/EU Category IV Module G – Single Unit Inspection Notified body: TÜV SÜD Notification number: 0036 FAT – Factory Acceptance Test Full factory FAT conducted and documented. Testing includes pressure test, NDT (non-destructive testing), dimensional inspection, surface roughness inspection, and documentation release. FEATURES • Cylindrical horizontal pressure vessel • Double jacket for heating/cooling • Interior electropolished • Pharmaceutical-grade welding • Manway DN500 • Multiple process and instrument connections • Safety valve • CIP connections • Suitable for pressure and vacuum operation CONDITION • Never used in production • TÜV Module G certified Hjdsykt T Repfx Afnofc • As-new industrial condition • Immediately available DOCUMENTATION – complete and available Comprehensive structured documentation including: • EU Declaration of Conformity • TÜV certificate with inspection report • TÜV design assessment • FAT documentation • Material certificates • Welding lists and WPS/WPQR • NDT reports • Surface roughness protocol • Surface treatment report • Internal pressure test • Dimensional protocol • Calibration certificate (pressure gauge) • Component drawings • Assembly parts list • Operation and maintenance manuals (equipment & components) • Qualification certificates • Analysis certificates for welding consumables and shielding gases Complete digital documentation file available. APPLICATIONS • Pharmaceutical industry • WFI / PW • GMP-compliant plants • Sterile liquid processes • Biotechnology High-quality BRINOX pharmaceutical version with PED Cat. IV Module G single unit inspection by TÜV SÜD, complete FAT, and full technical documentation. Immediately available.

Condition: new, Year of construction: 2020, functionality: fully functional, machine/vehicle number: BH6723-BH1001, tank capacity: 1,000 l, Equipment: documentation/manual, BRINOX 1,000 L Pre-Fill Tank – 1.4435 – Double Jacket – PED Cat. IV Module G – TÜV – FAT – 2020 – As New Manufacturer: BRINOX d.o.o. Type: SVMMBI-1000 Tag No.: BH6723-BH1001 Serial No.: 1003454 Year of Manufacture: 2020 CE Marking: CE 0036 Condition: As new / unused TECHNICAL DATA Product type: Pre-fill / process vessel Nominal volume: 1,000 L Total volume: 1,400 L Net weight: approx. 610–762 kg Product contact material: 1.4435 (AISI 316L) Permissible pressure PS: -1 / +3 bar Test pressure PT: 5.4 bar Permissible temperature TS: -10 / +150 °C Fluid group: 1 Design according to AD 2000 Pressure vessel in accordance with PED 2014/68/EU Category IV Module G – Individual inspection Notified body: TÜV SÜD Identification number: 0036 TÜV CERTIFICATION EU Declaration of Conformity (Module G) Certificate no.: Z-EU-SI-LJU-20-05-2702107-19125214 Inspection report no.: P-EU-SI-LJU-20-05-2702107-19125214 Final inspection in accordance with PED Annex I No. 3.2 carried out Pressure test in accordance with Annex I No. 3.2.2 carried out Acceptance without deviations Permissible load cycle count: 10,000 cycles (1.3 bar) Acceptance date: 20.05.2020 FAT – Factory Acceptance Test Complete works FAT carried out: • Pressure test • Visual inspection of weld seams • NDT testing (RT/PT) • Dimensional inspection • Surface roughness measurement (≤ 0.8 µm) • Calibration test • Documentation review FAT fully documented. DESIGN • Cylindrical, horizontal pressure vessel • Double jacket for heating/cooling • Internally electropolished • Pharmaceutical-grade weld finish • Manhole DN 500 • CIP connection • Safety valve • Pressure gauge • Multiple process and measuring nozzles • For pressurised and vacuum operation CONDITION • Never used in production • Factory tested • TÜV Module G certified • As-new industrial condition • No signs of use • Immediately available Hjdpfx Afoykqmzonefc DOCUMENTATION Complete structured documentation available, including: • EU Declaration of Conformity • TÜV certificate with inspection report • TÜV design assessment • FAT protocols • Material certificates EN 10204 3.1 • WPS/WPQR and welders’ lists • NDT reports • Surface roughness protocols • Internal pressure test • Measurement reports • Calibration certificates • Parts list and drawings • Operating and maintenance manuals Digital documentation folder available. • Pharmaceutical solutions • WFI / PW systems • Buffer and media preparation • Sterile liquid processes • GMP installations • Biotechnology High-quality BRINOX pharmaceutical specification with PED Cat. IV Module G individual inspection by TÜV SÜD (CE 0036) and complete FAT documentation. Not a standard tank – tested project quality. Immediately available.

Condition: new, Year of construction: 2020, functionality: fully functional, machine/vehicle number: BH6721-BH1001, tank capacity: 1,000 l, Equipment: documentation/manual, BRINOX 1,000 L Pre-Charging Tank – 1.4435 – Double Jacket – PED Module G – TÜV SÜD – FAT – 2020 – As New Manufacturer: BRINOX d.o.o., Slovenia Type: SVMBBl-1000 Tag No.: BH6721-BH1001 Serial No.: 1003453 Year of manufacture: 2020 Condition: As new / unused TECHNICAL DATA Hfjdpfjykpqrex Afnsc Product type: Pre-charging tank / process vessel Nominal volume: 1,000 litres Total volume: 1,400 litres Empty weight: 762 kg Product contact material: 1.4435 (AISI 316L pharmaceutical grade) CE marking: CE 0036 Permissible pressure PS: -1 / +3 bar Test pressure PT: 5.4 bar Permissible temperature TS: -10 °C to +150 °C Fluid group: 1 Design in accordance with AD 2000 regulations Pressure vessel in accordance with PED 2014/68/EU Category IV Module G – Single Inspection Notified Body: TÜV SÜD Industrie Service GmbH (ID No. 0036) TÜV acceptance, including final inspection and pressure test, fully documented. FAT – Factory Acceptance Test The vessel has undergone complete FAT testing and approval at the factory. Tests performed include, among others: • Pressure test according to PED • Visual inspection of all welds • Non-destructive examinations (RT, PT per inspection plan) • Dimensional and drawing comparison (as-built) • Internal roughness measurement (Ra ≤ 0.8 µm) • Calibration test of pressure gauges • Marking verification • Complete documentation review Full FAT reports available. DESIGN • Cylindrical, horizontal vessel • Double jacket for heating/cooling • Internally electropolished and passivated • High-gloss polished product surface • Pharmaceutical-grade weld seams • DN 500 manway • CIP connections • Safety valve • Pressure gauge • Bottom diaphragm valve • Agitator port (DN 200) • Multiple spare ports • Heavy-duty trunnion/support bearings • Integrated transport and lifting devices DOCUMENTATION – Complete and organized Extensive project-related quality and manufacturing documentation available, including: • EU Declaration of Conformity and warranty certificates • TÜV certificate with acceptance report (Module G) • TÜV design review and certification • 3.1 material certificates • Welder lists and welding procedure qualifications (WPQR/WPS) • Non-destructive testing reports (RT, PT, etc.) • Analysis certificates for welding consumables and shielding gases • Company qualification certificate • Roughness protocol • Surface treatment report • Dimensional accuracy report • Internal pressure test report • Pressure gauge calibration certificates • Component conformity and EU certificates • Compilation with parts list • Detail drawings • Operating and maintenance manuals Complete digital documentation file available. CONDITION • Never used in production • Warehouse stock • Internal surface in absolutely as-new condition • No corrosion • No signs of use • Industrial new condition • Immediately available SUITABLE FOR • Pharmaceutical solutions • WFI / PW systems • Buffer and media preparation • Sterile liquid processes • GMP production facilities • Biotechnological applications SPECIAL FEATURE High-quality BRINOX pharmaceutical-grade manufacturing with complete PED Module G individual inspection by TÜV SÜD, CE 0036 marking, and documented FAT testing. Not a standard tank – but certified project quality with comprehensive GMP-compliant documentation. Immediately available.

Condition: new, Year of construction: 2020, functionality: fully functional, tank capacity: 1,500 l, Equipment: documentation/manual, BRINOX 1,500 L Primary Precipitation Vessel – 316L – Double Jacket – PED Module G – FAT 2020 – As New Manufacturer: BRINOX d.o.o. Type: SVMBI-1500 Tag No.: BH6724-BH1001 Serial Number: 1003457 Year of Manufacture: 2020 Condition: As new / unused CE Marking: CE 0036 Hfedpeykn Iisfx Afnsc TECHNICAL DATA Product type: Primary precipitation vessel / process vessel Nominal volume: 1,500 liters Total volume: 1,785 liters Empty weight: approx. 866 kg Product contact material: 1.4435 (AISI 316L pharmaceutical grade) Jacket material: Stainless steel Vessel operating pressure: –1 / +3 bar Vessel test pressure: 5.4 bar Jacket operating pressure: according to design Temperature range: –10 °C to +150 °C Pressure vessel compliant with PED 2014/68/EU Module G – Individual acceptance Acceptance by notified body 0036 FAT – Factory Acceptance Test (08/2020) The vessel was fully tested at the BRINOX plant as part of a documented FAT. Tests performed included: • Delta ferrite test of weld seams (conforming, no deviations) • Surface roughness measurement (Ra internal ≤ 0.8 µm, compliant) • Visual inspection of all product-contact surfaces • Pressure testing as per specification • Documentation review • GMP deviation management (non-critical points, fully resolved) • Measuring equipment with valid calibration certificates EXECUTION • Double jacket for heating/cooling • Horizontal design • High-quality pharmaceutical construction • All product-contact areas in 316L stainless steel • Mirror-polished internal surfaces • GMP-compliant, documented weld seams • Large manway with swing cover • Multiple clamp and flange connections • Spray ball / CIP connections • Instrumentation ready (pressure, temperature, sensors) • Insulated jacket with connections • Heavy-duty flanged bottom • Lifting lugs and transport design • Project built for CSL Behring (Project SPHINX) CONDITION • Never used in production • Direct from project surplus • Interior absolutely as new • No corrosion • No signs of use • Industrial mint condition • Immediately available DOCUMENTATION Complete project-specific quality and manufacturing documentation available, including: • EU Declaration of Conformity • TÜV inspection certificates • PED Module G documentation • Material certificates 3.1 • Welding documentation (WPS/WPQR) • Delta ferrite test protocols • Roughness measurement reports • Calibration certificates for measuring devices • GMP deviation protocols • Fully signed FAT protocols • Operating and maintenance manuals Full and structured documentation available. • Pharmaceutical active substance processes • Precipitation and reaction processes • Buffer and solution preparation • Sterile liquid processing • Biotechnology • GMP production facilities • High-purity media SPECIAL FEATURE This is a high-quality BRINOX process vessel built to genuine pharmaceutical project standards for CSL Behring, featuring full PED Module G individual inspection, documented FAT 2020, and comprehensive GMP documentation. Not a standard tank – certified project quality for sterile applications. Immediately available.

Condition: new, Year of construction: 2020, functionality: fully functional, tank capacity: 30,000 l, Equipment: documentation/manual, BRINOX 30,000 L WWAS / Solution Vessel – 316L – PED – FAT – Complete GMP Documentation – Including Saddle Support – 2020 – As New Manufacturer: BRINOX d.o.o. Tag No.: LV6456-BH1001 Serial No.: 1003464 Year of Manufacture: 2020 Condition: As new / unused Location: Europe TECHNICAL DATA Product type: WWAS / Solution Vessel / Pharmaceutical Process Tank Working volume: 30,000 litres Total volume: 33,213 litres Product-contacting material: Stainless steel 1.4404 (AISI 316L) Surface finish: Chemically pickled, passivated and cleaned Surface roughness: Ra < 1.6 µm Standards and Guidelines: - PED 2014/68/EU compliant - CE marked - GMP-compliant pharmaceutical design Pressure Ratings: Hodpfxoykngfe Afnefc Min.: –0.14 bar(g) Max.: +0.5 bar(g) Test pressure: 0.72 bar(g) Temperature range: –20°C to +50°C Hydrostatic pressure test performed. FAT – Factory Acceptance Test Fully documented FAT performed including: - Dimensional, visual and identification checks - Weld seam inspection and NDT - Pressure test according to PED - Testing of all connections - Documentation and quality verification FAT successfully passed. FAT report available. CONSTRUCTION / DESIGN - Horizontal pharmaceutical process tank - Stainless steel 316L, pharmaceutical grade - Internal surfaces pickled and passivated - Hygienic, GMP-compliant design Connections include: - Manway DN500 - Inlet DN100 - Outlet DN50 - Instrument, safety and process ports Mechanical Features: - Original BRINOX stainless steel saddle support included - Heavy-duty version - Crane lifting points present CONDITION - Absolutely brand new - Never installed or used in production - Never filled with product - No corrosion or signs of use - Original industrial packaging available - Immediately available Saddle support also as new and included in the scope of supply. DOCUMENTATION – complete and GMP-compliant Comprehensive manufacturer and project documentation incl.: - EU Declaration of Conformity and CE documentation - PED documents - Material certificates EN 10204 – 3.1 - Welding documents (WPS / WPQR, welder lists) - NDT inspection reports - FAT protocol and pressure test report - Roughness and surface reports - Calibration certificates - Part drawings and Bills of materials - Operating and maintenance manuals Documentation fully available in digital format. TRANSPORT AND PACKAGING - Professional export packaging available - Original industrial packaging - Crane handling possible without issue - Worldwide shipping possible SUITABLE FOR - Pharmaceutical industry - Biotechnology - WWAS, WFI and PW systems - Sterile process solutions - GMP production facilities SPECIAL FEATURE Project surplus from an international pharmaceutical greenfield project with full FAT, PED conformity and GMP documentation. Large-capacity BRINOX 30,000 L Pharma Process Vessel in new plant quality incl. saddle support – immediately available.

Condition: refurbished (used), functionality: fully functional, input frequency: 50 Hz, DGUV certified until: 03/2027, type of input current: three-phase, year of last overhaul: 2026, Factory overhauled fan motor WP rack oven Circulation motor for Unitherm all models in stock! For every bakery with this bakery technology! immediately available! Hjdpfx Afecn Nr Uenefc with warranty

Condition: ready for operation (used), Year of construction: 2022, operating hours: 1,790 h, spindle speed (max.): 6,000 rpm, spindle motor power: 11,500 W, number of axes: 2, This Okuma LT2000-2T1MY was manufactured in 2022. It features two 22KW spindles, a 32-station BMT55 turret, and an OSP-P300LA control system with OSP and ECO suites. It includes a Samsys short bar loader, high-pressure pump, and tank. The machine offers 4-axis machining capabilities with Y-axis in the upper turret and is equipped with a 15" color LCD TFT multi-touch screen. If you are looking to get high-quality turning capabilities consider the Okuma LT2000-2T1MY machine we have for sale. Contact us for more information. Additional equipment • 22KW Okuma Spindle Main an Sub • 70mm max Bar Capacity Main Spindle and Bar Feeder Samsys Hedpfoyh Ntljx Afnefc • 2 turrets, each 16 stations, BMT55, live tools • proven and extremely sturdy and stable OSP300 • 80 bar Okuma high pressure package (Japan factory fitted stronger seals), on both turrets. Ideal e.g. for deephole drilling in inox, titanium, inconel. • In excellent conition, geometry very good. Okuma serviced and geometry report upon sale. • Automation: Samsys short bar loader • Extra Features: High-pressure pump & tank, high-pressure seal kit, workpiece removal arm, tool height correction in the Y-axis, coolant tank and pumps, detachable wired handwheel, tool monitoring, programmable face printing, and Hi-Cut Pro for driven tools • two BMT55 revolvers with 16 stations each Machine Benefits Technical Machine Benefits • Features: reduction of machine-related idle times, harmonic speed oscillation, automatic speed synchronization, and remote diagnostics during warranty • Machine hours: 2268 • Z taper: 140 mm • Front bearing diameter: 100 mm • Torque: 183 nm • Y-axis: y-axis in the upper turret with a movement range of +50/-45 = 95 mm • Helical interpolation: available with x/y/z linear axes, including eccentric milling with x/y/c axes • Tool monitoring system • Tool corrections: 96 tool corrections per turret Extra Information • Spindle Orientation: Electronic spindle orientation +/- 0.1 Memory: 2 GB part program memory with a maximum program length of 2 MB Data Management: MacMan machine management with integrated production data acquisition Control Unit Control System: CNC double turning center with a control system featuring OSP suite with numerous apps and ECO suite energy-saving features Display: 15" color LCD TFT with 3D color graphics and a multi-touch screen/panel Operating System: Second Windows operating system for operation and data communication Controller Ports: 2 USB 2.0 ports on the control panel Communication: Ethernet/LAN interface with browser and DNC-T1 for program transfer Turret Tool Stations: Upper and lower turrets each with 16 driven tool stations Motor Power: 5.5 kW per motor Speed Range: 50 - 6000 rpm Torque: 22.5 Nm Number of axes Upper turret: X/Y/Z/C (turret can be used both left and right, of course) Number of axes:Sub-spindle (right): lower turret XZC (turret can be used both left and right) chuck main spindle (left) Hainbuch mini 'Axzug' 65 (pull) Maximum clamping diameter on the main chuck (65 mm) chuck secondary spindle yes, Hainbuch mini 'Axfix' 65 (fixed, ideal for part relay into right hand spindle) Maximum clamping diameter on the main chuck (65 mm) Transformer included Inspection is available from 2023. Machine is in great condition and within geometry Maintenance protocol is available • 2x 22 kW PREX spindle, spindle passage on the left side sufficient for 70 mm bars. Mounted chucks: Hainbuch 65 Axzug and Axfix. • 2x 16-station turret, BMT55, top left with Y

Condition: new, functionality: fully functional, New device!! Special offer!!! New price: €160,000 Firing and thawing chamber for the pharmaceutical industry. Application Pharmaceutical and Bioprocessing. The Farrar Scientific Controlled Rate Chamber permits fast freeze/thaw from +40C to -80C, uniform bulk freezing and/or thawing of Phase-Change Material (PCM) or products contained in a variety of containers (bags, bottles or any size containers) such as single use system (SUS), polycarbonate vessels or polypropylene vessels. Temperature Range Programmable +40 ̊C to –80 ̊C Gbs7obps Chamber Volume 659.8 L (23.3 Cu. Ft.) Interior Dimensions (W x D x H) 34” x 27.5” x 43” 863.6 x 698.5 x 1092.2mm Exterior Dimensions (W x D x H) 75” x 38” x 80” 1901.5 x 960.4 x 2028.8mm Pull Down Empty Chamber < 38 minutes from +25 ̊C to –80 ̊C Door Open Recovery at –80 ̊C < 10 minutes Hfedpfxjv Rnl Do Afnjc 100L Load +25 ̊C to –80 ̊C < 12 Hours Unit comes with the complete documentation. Also the factory report. The unit is unused and in its original packaging. Shipping worldwide in a wooden box. (#7709) No further warranty or guarantee.

Condition: good (used), Year of construction: 2003, Tilting panel saw Altendorf F45 with ELMO IV-plus package, 2-axis scorer, 3m table, and Control-Plus control Sliding table length: 3000 mm Saw blade tilting from 0 to 45 degrees Speeds: 3000, 4000, 5000, and 6000 rpm with electronic speed display Drive motor: 5.5 kW with automatic motor brake Control panel at eye level with Control-Plus control 4-axis CNC controlled Cutting of chain measurements and grooves on the rip fence and crosscut fence Cutting width correction on the rip fence and crosscut fence with tilted saw blade 600 cutting programs Calculator function with direct transfer of results to the respective axis Tool management Saw blade diameter up to 450 mm Max. cutting height: 150 mm Hfedpfexw Ii Sox Afnjc Cutting width up to 1040 mm, electrically adjustable Tilting angle and height adjustment electrically adjustable Crosscut fence rail up to approx. 3210 mm, electrically adjustable, automatic coupling of the second stop flap for large dimensions Folding rip fence Extraction outlets: 120 + 80 mm Sliding carriage lockable Additional mitre fence rail 2 used saw blades and one scorer blade 2 riving knives 2-axis scoring unit, electrically adjustable during operation 2 blade guards 3 emergency stop switches Clipboard at the control panel CE marking Machine shows signs of wear. No cuts in the sliding table. Original paint (special paint finish), partially repainted in some areas. Machine has 18,985 operating hours. It originates from a furniture factory and has been regularly serviced and well-maintained. Condition as per original photos. A video of the machine in operation can be provided upon request. Approx. dimensions: 3150 x 3750 x 1900 mm (L x W x H). Weight approx. 1400 kg. The machine can be demonstrated on site by appointment. We only offer machines that are ready for demonstration in our warehouse, see "other offers from this seller".

Condition: used, Year of construction: 2019, x-travel 2.000 mm y-travel 820 mm z-travel 720 mm Control Mazatrol Smooth G spindle taper SK 40 spindle turning speed range 35 - 12.000 U/min spindle motor 22 kW distance spindle centre table top edge 140 - 860 mm table load 1700 Kg rapid travel x/y/z 50 m/min table width 820 mm table length 2500 mm table height over floor 870 mm T-slots 7 T-slot - width 18 mm T-slot - distance 100 mm tool change unit 48 tool changing time 4,7 sec wotkpiece diameter with 2 vacant positions 130 mm workpiece diameter at full load 80 mm max. tool weight 8 kg tool length - max. 350 mm air pressure - required 5 - 9 bar Air volume 260 l/min electrics - voltage/frequency 400 / 50 V/Hz coolant tank 450 l high-performance coolant system 25 bar total power requirement 46,7 kW weight of the machine ca. 14,8 t dimensions of the machine ca. 4,3 x 3,6 x 3,1 m STANDARD ACCESSORIES Transformer for the European market USB port (1 port) Mazak standard colour Spindle speed 12,000 min-1 (steep taper 40) Work area lighting SAFETY DEVICES Operator door with locking switch Work area panelling The splash guard encloses the working area from the side. Fully enclosed work area Protection against chips, coolant and access to the work area during automatic machining. Safety precautions in accordance with global standards COOLANT SUPPLY Coolant supply through spindle (pressure at the pump = 5 bar) Complete coolant system includes pumps, valves, pipework and nozzles for the efficient production of quality components. FACTORY AUTOMATION Automatic switch on/off and warm-up function Automatic switch-on of a warm-up cycle via digital timer MEASUREMENT SYSTEM Tool length measurement and tool breakage detection CHIP DISPOSAL Factory preparation for chip conveyor (left) NUMERICAL CONTROL Fixed control/operating unit Relocation Detector Mazatrol SmoothG control unit 19" LCD colour screen (touch screen) Mazak tapping/drilling cycle Tornado (Mazatrol) By drilling and tapping in helical machining mode, a wide range of diameters a wide range of diameters can be machined at high speed with a wide range of diameters can be machined at high speed with just one tool. This function minimises programming and machining times. EIA/ISO input function Tool path check in the background The tool path of a programme can be checked even if another programme number is programme number is called up and processed in automatic mode. 3D coordinate conversion Shape compensation for rotating axes Mazacc 2D software (contour correction) Accuracy is maintained at high feed rates. Mazacc-3D software package for high-speed machining High-speed and high-accuracy machining for contours defined in the finest programme contours defined in the finest programme increments. Hfodpfx Ajtuggcjfnec MAZACC-3D high-speed software package (NO456) is additionally required. Control with high smoothing Interface for LAN SD Memory Card I/F Smooth standard software for M/C - NO443 B) MAZACC-2D software (workpiece shape compensation) - NO444 D) MAZACC-3D high-speed software package - NO445 B) Shape compensation for rotating axes - NO497 D) High accuracy control for finishing operations - Seamless corner point control - Variable acceleration control - Ultra high speed machining mode - NO498 Rapid traverse paths Rounding function Absolute positioning system Machine incl. the f...

Condition: excellent (used), Year of construction: 2004, Hinst continuous cleaning system Continuous washing plants of the manufacturer Hinst are designed to treat serial parts in high quantities with highest cleanliness requirements at the same time. Plant no. 04.333 Year of construction 12.2004 dimensions approx. WxDxH: 3,80 x 4,30 x 3,80m incl. - 6 baskets: basket dimensions: 48,5x48,5x H26cm      - roller conveyor 2,10x52x90cm The continuous cleaning system has already been professionally dismantled and stored at a value of 3.500 €. these are included in the purchase price Transport can be organised by us, loading volume 2 articulated lorries. Complete factory closure, large selection of storage platforms, pallet racks, shelf racks, paternosters. High-quality industrial machines, lathes, grinding machines, hand machines. Financing through our bank is also possible. komplett-konzept.leasingo.de Hfjdpfx Asg Ipp Aofnec Further articles - new and used - you will find in our shop! International shipping costs on request!

Condition: excellent (used), Sat B2599A Drawer oven 130 °C If very different products or product parts with equally different annealing times are to be treated independently of each other in the smallest possible space, drawer ovens are the smartest ergonomic solution. Oven data Manufacturer: Sat Model: B 2599 A Type: 1000T Type: Drawer oven Outer dimensions of the furnace width with control cabinet: 2500 mm depth: 1700 mm Height: 2250 mm Usable volume in each drawer width: 1200 mm depth: 850 mm Height: 170 mm (measured 178 mm) Maximum working temperature: 130 °C Temperature homogeneity in the usable volume, when stabilized : +/-3°C at 80°C Frame : The basic structure consists of a non-alloyed steel beam structure, on which the external lighting made of non-alloyed steel is painted in RAL 1013 (pearl white). The furnace inner casing is made of aluminized steel sheet. Insulation between the two furnace housings (inner/outer housing) is provided by 120 mm rock wool. Floor: Same as the furnace walls, with 120 mm thick thermal insulation. Height (from factory floor to I. drawer): 800 mm +/100 mm adjustable by the furnace feet. Openings: 3 drawers, height 250 mm, for a usable load of 120 mm height. Maintenance doors : 2-leaf maintenance door on the back of the oven. Secured by screws. This door allows complete access to the inside of the furnace. Hodpsim Ik Sefx Afnjfc Parts handling: The handling of the parts is ensured by 3 drawers (one above the other). Height between each drawer : 250 mm Usable height per drawer : 170 mm, with almost 10 mm reserve. The drawers are smooth and equipped with a locking piece at the bottom of the drawer to reduce heat loss when opening. Each drawer has a useful load capacity of 120 Kg with load distribution over the entire surface. Load peaks up to 240 Kg can be supported. The drawer seals are made of silicone. The locks of each drawer are ensured by electromagnets and controlled by the Siemens system. Timing of the minimum preheating time with a timer per drawer (located in the electrical cabinet). Timing of the maximum preheating time with one timer per drawer (located in the electrical cabinet). One temperature indicator is provided per drawer. These indicators will be located on the front of the furnace, to the left of the drawers. Financing through our bank is also possible. komplett-konzept.leasingo.de More industrial furnaces in other sizes - new and used - you can find in our store! International shipping costs on request!

Condition: excellent (used), Schroeder & Bauer WB 32-1 Universal wire and strip bending machine Wire feed Plain text display Press force monitoring Wire straightener Bosch wire stripper Holder and brush motor with mounted tool W32/1-32 Soundproof booth Barrel CU wire with punched parts Switch cabinet Item condition: very good Description of the manufacturer, deviations possible.  You buy the machine as it can be seen on the pictures.  Hedpfx Afjh I Nrqjnefc Complete factory closure, large selection of storage platforms, pallet racks, shelf racks, paternosters. High quality industrial machines, lathes, grinding machines, hand machines. Financing through our bank is also possible. komplett-konzept.leasingo.de Further articles - new and used - you will find in our shop! International shipping costs on request!

Year of construction: 1990, condition: good (used), Weiss temperature test chamber WT 11-18 KWP 500/40  Spring, summer, autumn and winter - your products must be able to withstand different temperatures during manufacture, transport, storage and use. The temperature test chambers from Weiss Technik help you to test the influence of thermal conditions on the properties, function and service life of your products. Manufacturer: Weiss Technik Type: KWP 500/40 - 180 DU Designation: WT 11-18 Type: Temperature test chamber Test chamber volume: 500 ltr. Temperature range: -40°C to +180°C Outside dimensions: 110 cm wide, 173 cm deep and 204 cm high Dimensions inside: 80 cm wide, 85 cm deep and 85 cm high Pressure: 25 bar Voltage: 380 V Frequency: 50 Hz kVA: 4.7 Refrigerant: R 502 Year of manufacture: 1990 Hfsdpfxeh Izh Is Afnjc Condition: used complete factory closure, large selection of storage platforms, pallet racks, shelf racks, paternosters. High-quality industrial machines, lathes, grinding machines, hand machines Financing through our bank is also possible. komplett-konzept.leasingo.de Further articles - new and used - you will find in our shop! International shipping costs on request!

Condition: good (used), Benzinger TNL / TRP I CNC Precision Lathe Manufacturer's specifications, deviations are possible. Center height: 80.5 mm Max. turning length: 100 mm Max. swing diameter over bed: 220 mm Max. swing diameter over cross slide: 130 mm Max. travel length in x direction: 300 mm Max. travel length in z direction: 240 mm Power supply: 380 V 50 Hz CNC Numerical Control: Bosch CC 100 T Accessories/Special Equipment: TRP Swing Loader Complete factory closure, Hedpfxshufc Ej Afnofc large selection of storage platforms, pallet racks, shelving units, and paternosters. High-quality industrial machines, lathes, grinders, and hand tools Financing through our bank is also possible. komplett-konzept.leasingo.de Find more items - new and used - in our shop! International shipping costs upon request!

Condition: new, functionality: fully functional, power: 11.2 kW (15.23 HP), gearing type: hydrostat, fuel type: hybrid, fuel consumption per hour: 1.5 l/h, fuel tank capacity: 12 l, color: blue, overall weight: 2,900 kg, lifting power: 2,980 kg/m, lifting height: 16,950 mm, tire size: 950 × 180 mm (rupsen), tire condition: 100 %, emission class: euro5, Year of construction: 2024, operating hours: 1 h, Equipment: adjustable boom, adjustable chassis, low noise, onboard computer, rubber tracks, === KEY SPECIFICATIONS === Year of manufacture: 2024 Operating hours: 0 h (new) Max. lifting capacity: 2,980 kg (at 1.8 m – main boom) / 1,000 kg (at 5.2 m – jib) Max. lifting height: 16.95 m (with jib) Drive system: Hybrid (Kubota Z482-E4B diesel engine + AC electric motor 4.0 kW) Remote control: Yes (radio remote, proportional) Jib: Included (3-section, automatic telescopic) Attachments / additional equipment: LED work lights, emergency control, tilt alarm, hydraulic safety valves, datalogger, variable crawler gauge, automatic multi-position outriggers Track type: Rubber tracks Track size: 950 × 180 mm Track condition (if applicable): New Weight: 2,900 kg CE certification: Yes === HIGHLIGHTS === Hybrid mini crawler crane (diesel + electric motor) suitable for indoor and outdoor use Fully automatic 5-section telescopic boom with 3-section jib up to 16.95 m Excellent manoeuvrability thanks to narrow crawler undercarriage (780 mm) Kubota diesel engine 7.2 kW combined with 4.0 kW electric motor (380V) Compact design with overall height of only 1.94 m Hfedpfoxg A Twox Afnsc CE certified and ready for immediate operation === CONDITION === New machine – never used, factory-new condition, supplied with full warranty and CE certification. Colour: Blue Price: €119,500 (EXW / excluding VAT) === LOCATION & DELIVERY === Located in Sittard, the Netherlands. Worldwide delivery possible. Price €119,500 (EXW / excluding VAT). The Maeda MK 3053CW is a hybrid mini crawler crane equipped with a fully automatic 5-section telescopic boom and 3-section jib, offering a maximum lifting height of 16.95 metres. The combination of a Kubota diesel engine and electric drive makes the crane suitable for both indoor and outdoor applications. With compact dimensions (3,195 × 780 × 1,945 mm) and proportional radio remote control, the MK 3053CW is ideal for installation, glazing and maintenance work where precision and compactness are essential. === DELIVERY === Crane loading available on request for smooth dispatch. Flexible shipping options tailored to destination and logistical requirements. All transport is handled professionally by the Collé Rental & Sales logistics team.

Year of construction: 1964, condition: good (used), Diskus Werke DSH 600/1000 Side Face Grinding Machine  This machine type is a machine with a motor-driven grinding spindle. Clamping and grinding of the workpieces is done with clamping devices adapted to the respective work. The devices are attached to the machine bed. The column saddle, on which the motor spindle is mounted, serves as a feed, dressing and pendulum slide. Manufacturer: Diskus Werke Model: DSH 600/1000 Serial number: 6299 Type: Side surface grinding machine Cooling lubricant: Isocool 1020 BF Coolant volume: 400 litres Concentration: 2.5% (x factor 1.6 ≙ 4%) Year of manufacture: 1964 Condition: used  Complete factory closure, large selection of storage platforms, pallet racks, shelf racks, paternosters. High-quality industrial machines, lathes, grinding machines, hand machines. Financing through our bank is also possible. komplett-konzept.leasingo.de Hsdpehtyudsfx Afnjfc Further articles - new and used - you will find in our shop! International shipping costs on request!