Used Sc for sale (58,244)

Condition: new, - NEW-descriptionCutting plane directly on the saw bladeHeavy steel and cast iron constructionPrecision-guided format sliding carriage made of aluminium,anodized as standardLarge-area table extension guided on a telescopic arm andlongitudinally adjustableExtendable aluminum telescopic fence, angle adjustable with professionalstop flapsRip fence with quick release and fine adjustmentLarge work table made of milled gray cast iron stays permanently flatThe standard table extension and table extension enable easy work with larger workpiecesQuiet running and precise cutsEquipped with a powerful three-phase motorThe large dimensioned cast iron sawing unit is attached twice to the cast iron table and guarantees stability, precision, smooth running and a long service lifeMaximum cutting height is also achieved with the built-in scoring deviceEquipment details:Double cradle saw unitGenerously dimensioned, made of steel/cast ironClose to the saw blade, supported on both sides for precision, smooth running and a long service lifeAdjustable in height and up to 45° with a crankMaximum cutting height is also achieved with the built-in scoring deviceAlso available with scoring unittelescopic stopExtendable telescopic stop up to max. 2550 mmAngle adjustableWith professional stop flapsAluminum sliding carriageWith a thousand times proven ball contact systemInsensitive to dust and dirt due to minimal contact point between ball and trapezoidal rail10-year Holzkraft guarantee on wear and tear on the guidewaysRip fence with round rod guideWith fine adjustment and quick releaseStable round rod guide made of ground steel with a diameter of 45 mmCan be folded down as standard for cutting large workpiecesTechnical specifications:Dimensions and weightsWeight (net) approx. 380 kgConnection suctionSuction connection diameter 120 mmSuction connection diameter saw blade protection 60 mmMachine body length 1388 mmWorking area length 1000 mmMachine body width/depth 689 mmWorking area width/depth 2000 mmSpace required length 5118 mmSpace requirement width/depth 3830 mmelectrical dataConnection voltage 400 VDrive motor power 5.0 kWPhase(s) 3 PhNominal operating mode drive motor S6Type of current ACDuty cycle drive motor 40%Mains frequency 50 HzSliding carriage and tableFormat slide length 2250 mmTable length 840 mmFormat sliding carriage width 270 mmTable width 560 mmFormat sliding carriage height 124 mmTable height 900 mmcircular saw unitCutting width with rip fence 900 mmMax. cutting height 90° 90 mmMax. cutting width to the left of the saw blade 2310 mmMax. cutting height 45° 63 mmtrimming length 2250 mmSaw blade diameter 315 mmSaw blade inclination 90 - 45°Saw blade speed 4000 rpmArt. No. 5504323Ausziehbarer Teleskop-fence to max. 2550 mmWinkeladjustableMit Profi-AnschlagklappenAluminium-sliding tableMit tausendfach bewährtem KugelkontaktsystemStaub- and schmutzunempfindlich durch minimalen Berührungspunkt zwischen Kugel and Trapezschiene10 Jahright hand Holzkraft-guarantee on abrasion der Führungsbahnenrip fence with round rod guidingMit fine adjustment and quick clampingStabile round rod guiding aus geschliffenem steel with 45 mm diameterSerienmäßig tiltable for den Zuschnitt großer WerkstückeTechnische Daten:dimensions and Gewichteweight (Netto) ca.   380 kgAnschluss Absaugungsuction nozzle diameter   120 mmsuction nozzle diameter Sägeblattschutz   60 mmAufstellinformationenTransportbreite   900 mmErläuterung required spaceDie d... Nljdpsvyuqfjfx Aa Eek

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2012, operating hours: 661 h, Trench roller No. 4 Wacker Neuson RT 82 SC 2, built in 2012, 661 operating hours, weight 1490 kg, Kohler diesel 15.5 KW, serial no. 20140613, radio control + cable, functional Nodpfjv I T E Rex Aa Eelk

Condition: new, Year of construction: 2025, functionality: fully functional, cutting length (max.): 3,200 mm, cutting width at rip fence: 1,250 mm, cutting height (max.): 90 mm, saw blade diameter: 400 mm, height adjustment type: electric, overall weight: 1,810 kg, extraction nozzle diameter: 100 mm, slide length: 3,200 mm, rotational speed (max.): 5,000 rpm, input voltage: 400 V, warranty duration: 12 months, input frequency: 50 Hz, power: 7 kW (9.52 HP), Equipment: motor brake, SC-400/3200 Top. Machine with good quality and solid construction. A machine that meets your expectations. Stroke length 3200 mm, saw blade 400 mm, scoring blade. The machine is available in several different models and different sizes. Very affordable machine. Nsdpfx Aowizxaja Eslk

Condition: new, functionality: fully functional, machine/vehicle number: 11042025, Year of construction: 2025, operating hours: 1 h, load capacity: 1,500 kg, lifting height: 115 mm, fuel type: electric, fork length: 1,150 mm, empty load weight: 180 kg, drive type: Elektro, Pallet Truck VIN: 11042025 Load Center: 600 Condition: New Technical Condition: New Front Tires Type: Polyurethane Front Tires Condition: New Rear Tires Type: Polyurethane Rear Tires Condition: New Battery Voltage: 24V Battery Ah: 20Ah Battery Type: Lithium-Ion Nsdpfjwb Nb Hex Aa Eslk Battery Year of Manufacture: 2025 Battery Condition: New Description: PT E15N SC / EDGE with Scale & Printer CE Certificate, Scale, Dual Tires PT E15N SC / EDGE with Scale & Printer

Condition: as good as new (ex-display), Year of construction: 2024, operating hours: 1 h, New 7,5 kW variable screwcompressor FirstAir FAS SC 7 Type: FAS SC 7 Year of construction: 2024 technical spezifications: operating pressures of the system: 10 bar(ue) at 10 bar : min.: 530 l/min max.: 1050 l/min Installed power: 7,5 kW speed drive motor: 2930 1/min SProtection class / Insulation class Drive motor: IP55 / F Nledsv Dkplepfx Aa Eok Operating voltage / frequency: 400/50 V / Hz Sound pressure level (DIN 45635 T13) : 68 +/- 3 Compressed air connection:G 3/4" Length : 880 mm Width : 880 mm Height : 1075 mm Weight : 300 kg Visit our store !

Year of construction: 2020, operating hours: 0 h, condition: new, 4 Stationary Warm Air Heaters S / SC oil/gas from Knoll for sale. Purchased in 08/2022 from DEXES Berlin, Original: 12.499 € net/piece; Warranty until 7/2024. 2 pieces unused (11,000 € net/piece); 2 pieces were used only 3x: for this the price is further negotiable. Location 95506 Kastl; to be sold individually; Self-collection desirable. Nljdpeppv Hbjfx Aa Eok The warm air heater is already equipped with an oil burner / nozzle and room thermostat.

Condition: new, - NEW -- Cutting plane directly on the saw blade- Large dimensioned cast iron saw unit double on the cast iron tablefastened - guarantee for stability, precision, smooth running and long service life- Precision-guided format sliding carriage made of aluminium, standardanodized- 10-year HOLZKRAFT guarantee on wear and tear on the guideways of thesliding carriage- Rip fence with round rod guide and fine adjustment as standard- Large work table made of milled gray cast iron- Quiet running and precise cuts- Enable standard table widening and table extensioneasy work with larger workpieces- Extendable aluminum telescopic fence with angle adjustment andtwo professional folding stops-Made in ItalyTECHNICAL SPECIFICATIONSDimensions and weightsWeight (net) approx. 295 kgConnection suctionSuction connection diameter 120 mmSuction connection diameter saw blade protection 60 mminstallation informationTransport width 700 mmMachine body length 802 mmMachine body width/depth 615 mmSpace required length 3860 mmSpace requirement width/depth 2750 mmExplanation of space requirementsThe dimensions take into account maximum travel distances or usable lengthsWorking area length 1000 mmWorking area width/depth 2000 mmExplanation of work areaPlease add the specified dimensions to the space required to calculate theto obtain the recommended free installation space for the ctrical dataConnection voltage 400 VMains frequency 50 HzDrive motor power 4.0 kWRated operating mode drive motor S 6Duty cycle drive motor 40%Sliding carriage and tableFormat slide length 1600 mmFormat sliding carriage width 270 mmFormat sliding carriage height 124 mmTable length 1020 mmTable width 325 mmTable height 860 mmcircular saw unitCutting width with rip fence 900 mmMax. cutting width to the left of the saw blade 1660 mmtrimming length 1600 mmSaw blade inclination 90 - 45°Max. cutting height 90° 100 mmMax. cutting height 45° 79 mmSaw blade diameter 315 mmSaw blade speed 4000 rpmFURNISHINGAnodized aluminum format sliding carriageHandle for sliding carriagetrimming frameSaw rip fence with round rod guideStops Two professional folding stopstrimming shoeeccentric clamptable extensiontable extensionsaw blade guard&nbsp, Nlsdpfxevyup Uj Aa Eek

Condition: new, Year of construction: 2024, operating hours: 1 h, working width: 9,500 mm, Cutter bar: Discs | CLAAS Disco 9700 C Contour New from 2024, not yet completed - Large-area mower for rear tractor mounting, Category III - Working width 8.80 m - 9.50 m, hydraulically adjustable - Main frame with optimized center of gravity thanks to angled rearward-mounted booms - Low-speed concept with speed reduction to 850 rpm - Tine conditioner with V-shaped, rubber-mounted steel tines Equipment: Wear skids 3-point hitch Wide-spreading system 1 3/8" PTO shaft, 6-piece ISOBUS cable External protective covers, hydraulically foldable Automatic slope control Claas Disco 3200 FC front mower available as an option | Internal No.: 11180889 Nledpfswbaytsx Aa Ejk

Condition: used, mileage: 660,199 km, power: 340 kW (462.27 HP), first registration: 08/2017, fuel type: diesel, empty load weight: 8,537 kg, overall weight: 18,000 kg, axle configuration: 2 axles, brakes: retarder, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: steel-air, number of beds: 2, number of seats: 2, Equipment: ABS, air conditioning, central locking, compressed air brake, cruise control, differential lock, onboard computer, parking heater, truck registration, | DAF Space Cab, EURO6 | automatic, Intarder, electric windows | refrigerator, air conditioning | multifunction steering wheel, cruise control, | auxiliary heating, radio/CD, DTS | digital speedometer, differential lock | errors and omissions excepted. Nlsdpsvia Nxsfx Aa Esk

Condition: used, Year of construction: 2002, machine/vehicle number: 9385/E, SECOND-HAND BAND SAW CML TYPO SC800 - CE RULES - S/N 9385/E Nedpfx Ajwr Ekrsa Eslk - Year 2002

Condition: as good as new (ex-display), Year of construction: 2022, operating hours: 1 h, New 15 kW variable screwcompressor FirstAir FAS SC 15 Type: FAS SC 15 Year of construction: 2022 technical spezifications: operating pressures of the system: 10 bar(ue) at 10 bar : min.: 990 l/min max.: 1980 l/min Nlodsvz U Slepfx Aa Esk Installed power: 15 kW speed drive motor: 2930 1/min SProtection class / Insulation class Drive motor: IP55 / F Operating voltage / frequency: 400/50 V / Hz Sound pressure level (DIN 45635 T13) : 70 +/- 3 Compressed air connection:G 3/4" Length : 960 mm Width : 930 mm Height : 1075 mm Weight : 425 kg Visit our store !

Condition: used, Spindle/plateau diam.: 2100 mm - [...] height: 1500 mm - CNC: NUM - [...] diam.: 2200 mm - CNC NUM 720 CHIP CONVEYOR 1 RAM CONTROLLED 1 RAM MANUAL Nljdpfx Aodawuqsa Eok

Condition: new, - New-- Cutting plane directly on the sliding carriage- Heavy steel and cast iron construction- Precision-guided format sliding carriagemade of aluminium, anodised as standard- Large table extension on telescopic armguided and longitudinally displaceable- Extendable aluminum telescopic stop,angle-adjustable with professional stop flaps- Rip fence with quick release and fine adjustment- Large work table made of milled gray cast ironremains permanently plan- The standard table extension and table extensionextension make it easy to work with larger onesworkpieces- Quiet running and precise cuts- Equipped with a powerful three-phase motor- The large dimensioned saw aggregateGray iron is doubly fixed to the cast iron table and isa guarantee for stability, precision, smooth running andlong lifetime- Maximum cutting height is also when installedscoring device reachedMade in ItalyEquipment details:Double cradle saw unit- Oversized, made of steel/cast iron- Close to the saw blade, supported on both sidesfor precision, smooth running and a long service life- Adjustable in height and up to 45° using a crank- Maximum cutting height is also when installedscoring device reached- Also available with scoring unittelescopic stop- Extendable telescopic stop up to max. 2550 mm- Angle adjustable- With professional stop flapsAluminum sliding carriage- With a thousand times proven ball contact system- Resistant to dust and dirtminimum point of contact between ball andtrapeze rail- 10-year Holzkraft guarantee against wear and tearguidewaysRip fence with round rod guide- With fine adjustment and quick release- Stable round rod guide made of ground45mm diameter steel- Foldable as standard for cutting large onesworkpiecesTechnical specifications:Dimensions and weightsWeight approx. 385 kgDust extraction connectionSuction connection diameter 120 mmSuction connection diameter saw blade protection 60 mmelectrical dataDrive motor power 5.0 kWConnection voltage 400 VFormat sliding carriage and tableFormat slide length 2600 mmFormat sliding carriage width 270 mmFormat sliding carriage height 124 mmTable length 840 mmTable width 560 mmTable height 900 mmcircular saw unitCutting width with rip fence 900 mmMax. cutting width to the left of the saw blade 2310 mmtrimming length 2600 mmSaw blade inclination 90 - 45 °Max. cutting height 90° 90 mmMax. cutting height 45° 63 mmDiameter (main) saw blade 315 mmSpeed ??of (main) saw blade 4000 rpmPU 1Scope of delivery:Table extension and table wideningAnodized aluminum format sliding carriageAluminum folding stopsRip fence with round rod guide andfine tuningItem No. 5504326 Nedpfxsvyupzj Aa Eslk

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, Stainless steel meat injector with mesh conveyor belt Manufacturer: Fomaco A/S, Denmark Model: FGM 88 SC Machine number: 10354-2006 Year of manufacture: 2006 Power supply: 3×400 V / 50 Hz Current consumption: 29 A Protection (max. fuse): 63 A Working air pressure: 6 bar Number of needles: 88 Type of belt: Plastic mesh belt Belt width: 720 mm Overall dimensions: 2300 mm (L) × 1150 mm (W) × 2240 mm (H) Nsdpfxjw D Hz Ne Aa Eelk

Condition: good (used), Manufacturer: APD Type: 12 SC Delivery capacity: 3600 l/s Max vacuum: 5x10-6 Torr Ideal for high vacuum Nsdpfx Aaecwrn Eo Eolk

Condition: used, SCM SC3 classic Model: SCM GROUP SPA Manufacturer: SC 3C Max. saw blade diameter with scoring blade installed: 315 mm 90%45° max. saw blade projection from table: 100/79 mm Nlodpfx Aaew Nwdws Eek Cutting width on parallel fence: 900 - 1270 mm Squaring stroke: 2310 - 2260 mm Three-phase motors starting from: 5(6)/50(60)

Condition: refurbished (used), Year of construction: 2007, functionality: fully functional, machine/vehicle number: 9286, product height (max.): 450 mm, product height (min.): 40 mm, product width (max.): 160 mm, product width (min.): 20 mm, Drilling - Sawing - Slotting - Marking TECHNICAL DETAILS Minimum wood dimensions: 20 × 40 mm Maximum wood dimensions: 160 × 450 mm Wood length: any Positioning accuracy: ±0.5 mm Equipment and Automation Loading: automatic wood feed Unloading: automatic wood discharge Transport and clamping system: combined feed/clamping device with servo drive Feed systems: two independently operating feed systems (rollers + servo carriage) Control system: Single-Piece-Construction-Program (SPCP™) Compatibility: can be imported from CAD programs such as Robbins®, MiTek®, Alpine®, and KeyMark® Operation Required staff: just one person for loading and unloading User interface: simple and intuitive user guidance Processing Functions Milling, drilling, marking: fully automated Application: wall elements, timber framing, beams, I-joists Nlodowwqzaepfx Aa Eek Processing speed: extremely fast without setup time Horizontal drilling unit Types of drilling: through and blind holes Application: e.g. rafter drilling Grooving unit Use: through and blind grooves Chain widths: various chains can be used Example application: base for posts Material handling Material transport: even stacked workpieces can be safely transported and processed Material detection and positioning: automatic via feed/clamp system and servo carriage MACHINE DETAILS Footprint: 19.10 x 5.00 m Height: 2.43 m

Condition: new, Type: SC 330 Completely made of special stainless steel 330-liter bowl made of stainless steel Frequency speed regulation 2 bowl speeds – fast and slow Knives speed frequent speed regulation (6 speed) Unloading device: right side Main cover made of special steel, stainless steel Noise-canceling cover made of stainless steel Distribution cabinet made of special steel, inside the machine 6 knives in set Machine dimensions in cm: Width: 243 Depth: 230 Height: 182 Nsdsunag Ropfx Aa Ejlk Electric power: 80 kW Voltage: 400 V, 50 Hz

Condition: new, The work table made of heavily ribbed gray cast iron andguarantee the base made of welded steelTorsion resistance and vibration-free workingHigh quality machine at a real entry-level priceUnique in this performance class:- Format sliding carriage made of anodized aluminum for the highestcutting precision- Cutting plane directly on the saw blade- Swiveling saw blade unit from 90 - 45 °- Table bracket with aluminum crosscut fence and adjustableStop flap for plates and large workpieces- Rip fence with round bar guide and fine adjustment- Powerful engine- Made in EuropeDimensions and weightsWeight (net) approx. 170kgDust extraction connectionExtraction nozzle diameter 120mmExhaust nozzle diameter saw blade protection 60mmTransport width 680 mmWorking area 1600 mm x 2300 mmSpace requirement 2613.5 mm x 2134 mmPlease add the specified dimensions with the space required to obtain the recommended free space for the dimensions take into account maximum travels or usable lengthsElectrical data400 V supply voltageDrive motor 1.8 kWPhase (s) 3 PhNominal operating mode drive motor S6Current type ACDuty cycle drive motor 40%Mains frequency 50 HzSliding carriage and tableFormat sliding table 1140 mm x 200 mm x 70 mmTable 1024 mm x 224 mm x 900 mmsaw unitCutting width with rip fence 700 mmMax. Cutting height 90 ° 67mmMax. Cutting width to the left of the saw blade 1200 mmMax. Cutting height 45 ° 40mmEdging length 1200 mmSaw blade diameter 250mmSaw blade inclination 90 - 45 °Saw blade speed 3900min¯¹scope of deliverytable extensionAnodized aluminum sliding tableRip fence with round bar guide and fine adjustmentAluminum folding stopEccentricItem No. 5504113 Njdpevxr S Rofx Aa Eolk

Condition: good (used), Year of construction: 1991, Fladder SC 300 / 1000 finishing and brushing machine Nsdokwcxyjpfx Aa Eolk Year of manufacture 1991 Manufacturer Fladder System Denmark S/N 560 Machine height 2210 mm Machine width incl. carousel 4000 mm Machine length incl. carousel 4500 mm working height carousel 800 mm Working width 1200 mm Max. Workpiece height 100 mm throughput speed 0,3 - 10,0 m/min. lock-itTM spindles and length 6 x Ø100 x 350 mm Voltage 3 x 400/500V - 50/60Hz Max./min. Fuse 32 A Max. Power consumption 15 kW Suction 2500 m3/h Net weight 1700 kg

Condition: like new (used), Year of construction: 2008, I sell the vertical saw with scoring knives Putsch-Meniconi SVP-145, Condition like new. Cutting range 4200x2100mm Motor 3,0kW (4,0 HP). Cutting head tilting 0-90° With scoring knives unit (Holz-Her Supercut type) Manual cutting. Condition like new. Total weight 710kg. Nljdowigdbspfx Aa Esk Available immediately.

Condition: like new (used), Year of construction: 2025, functionality: fully functional, saw blade diameter: 315 mm, power: 5.5 kW (7.48 HP), Equipment: scorer, The SC 20 circular saw with tilting blade is a compact machine but with high level performances. Flexibility: The sliding table with steel hardened guide-ways assures processing without vibrations, exact movements and long lasting Ergonomics: ergonomically positioned control panel at the front of the machine. Besides machine "basic" configuration this machien has added big exctraction hood to more safer and comfortable working. The circular saw SC 20 with tilting blade and 1600 mm carriage is a compact machine but with high level performances that assure excellent results in any working condition. The carriage with sliding on guides made of hardened steel assure stability and precision machining Sawblade tilting 90 ÷ 45°: maximum flexibility Squaring frame with telescopic swinging arm support and 2 lenght stops Fixed table dimensions: 1020 x 325 mm Max. diameter of saw blade with scoring unit installed: 315 mm Saw blade tilting: 90° ÷ 45° Saw blade rotation speed RPM: 3500 Nledpfx Aaexawv He Eek Max. saw blade projection at 90°/45° with blade Ø 315 mm: 100/68 mm Max. squaring stroke: 1600 mm Standard cutting width on rip fence: 1270 mm Saw blade motor power at 50/60 Hz (HP) (S6): 5,5 kW Scoring unit with belt transmission Suction hoods diameter: 1 x Ø 120 mm/1 x Ø 60 (80) mm Suction speed: 20 m/sec Air consumption: 850 m³/h Net weight basic machine: 350 Kg

Condition: new, Type: SC 200 Completely made of special stainless steel 200-liter bowl made of stainless steel Frequency speed regulation 2 bowl speeds – fast and slow Knives speed frequent speed regulation (6 speed) Unloading device: right side Main cover made of special steel, stainless steel Noise-canceling cover made of stainless steel Distribution cabinet made of special steel, inside the machine 6 knives in set Nlsdjum Ungepfx Aa Esk Machine dimensions in cm: Width: 220 Depth: 200 Height: 182 Electric power: 57 kW Voltage: 400 V, 50 Hz

Condition: used, used, good condition Make Steton Type SC 400 / 3200 CE type tested Motor boosted 6.5 kW Trolley length approx. 3200 mm Cutting width approx. 1300 mm max. blade diameter 400 mm swiveling up to 45° scoring unit parallelogram protection control panel above Rip fence with electrical adjustment Table top extension approx. 400 x 800 mm Electric height adjustment Njdpfx Aaevyt D De Eslk Swivel adjustment electric Digital display: - cutting angle - Rip fence - Rotational speed Extraction connection D 120 / 60 mm Space requirement approx. LxWxH mm 3400x2300x1700 Weight approx. 1000 kg Storage location 97447 Gerolzhofen Handover in the current condition as seen - free loaded -

Condition: new, Type: SC 20 Completely made of special stainless steel 20-liter bowl made of stainless steel Nodpfsunakiox Aa Eolk Knives speed frequent speed regulation (6 speed) Main cover made of special steel, stainless steel 3 knives in set Machine dimensions in cm: Width: 83 Depth: 63 Height: 91 Electric power: 1,5 kW Voltage: 380 V, 50 Hz