Used Sc for sale (8,420)

Condition: excellent (used), White Type: SC/KWT 450 Salt Spray Chamber Technical Specifications: Test chamber capacity: 450 liters Max. load: 100 kg Brine storage tank: 180 liters External dimensions: Height 920 mm, Width 1930 mm, Depth 800 mm Test chamber dimensions: Height 740 mm, Width 850 mm, Depth 570 mm Areas of application: Corrosion tests: Salt spray test: Room temperature up to +50°C Condensation test: Room temperature Up to +45°C Humidifier +75°C Temperature stability The temperature deviation over time is ± K. Voltage: 1/N/PE AC 230V ±10% 50Hz Rated power 2.0 kW, Rated current 8.7 A Combination: Salt spray test SS: DIN 50021 Condensation test KFW: DIN 50017 Normal climate (ventilation): DIN 50014 Hodpfx Ajw Strcjcvok Weight: 180 kg Condition: Used Scope of delivery: (See image) (Subject to changes and errors in the technical data, information is subject to change!) We are happy to answer any further questions you may have over the phone.

Condition: excellent (used), Atlas Hsdpsxbd Rasfx Acvok Type: SC 350 MHG Atlas Solar Climatic Test Chamber, Air-Cooled For sale is an ATLAS SC-340 MHG SolarClimatic Test Chamber (climatic chamber with solar simulation via MHG lamp). The device is suitable for carrying out standardized weathering and aging tests under the combined influence of radiation, temperature, and climate. Features & Highlights: - Precise temperature and humidity control - Integrated humidification system with water reservoir - Cooling via water or air system (optional) - Feed-throughs available for measuring leads - Control via control panel or interfaces (RS232, etc.) - Sturdy test chamber floor, loadable up to 60 kg (optionally reinforced to 150 kg) General Data: Model: SC 340 MHG Test chamber volume: approx. 335 liters Cabinet weight: approx. 500 kg Irradiation unit weight: approx. 65 kg Technical Data: Test volume: 340 l (internal dimensions 580 × 765 × 750 mm) External dimensions (W×D×H): 865 × 1,595 × 2,180 mm Light source: 1 × 1,200 W MHG lamp Irradiance: 800–1,200 W/m² Illuminated area: approx. 3,300 cm² Weathering spectrum: 300–3,000 nm, compliant tests according to DIN 75220, IEC 60068-2-5, MIL-STD-810F Temperature range with irradiation: –20 °C to +100 °C (±1 K) Temperature range without irradiation: –30 °C to +100 °C (±0.1–0.5 K) Heating/Cooling rates: 3.0 K/min (heating), 2.5 K/min (cooling, without irradiation) Noise level: approx. 58 dB(A) at a distance of 1 m Power supply: 400 V, 3/N/PE, 50 Hz Power consumption: max. 6.2 kW, 16 A Refrigerant: R-404A Weight: approx. 565 kg Information for your safety as a buyer! The following procedures are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If required, refilling with legally compliant refrigerant 3. Leak test with certification 4. After successful inspection, the chambers are subjected to a documented trial run. Condition: used Scope of delivery: (See picture) (Specifications and technical details subject to change and errors reserved!) Feel free to contact us by phone for any further questions.

Year of construction: 2020, condition: good (used), Pad printing machine, screen printing machine, rotary printing machine, pad printer -Manufacturer: Eickmeyer, screen printing machine, pad printing machine -Type: TIC 121 SC -Voltage: 230 V -Table size: 180 x 100 mm -Protrusion: 165 mm -Operation: with foot pedal -Number: 2x pad printing machines available -Price: per piece Hodpfx Acex Ei Twjvek -Transport dimensions: 670/400/H530 mm -Weight: 50 kg/piece

Condition: ready for operation (used), Year of construction: 2021, functionality: fully functional, machine/vehicle number: X7QP000006, paper width (max.): 1,620 mm, Epson SureColor SC-R5010L wide-format resin inkjet printer in good working condition, available for immediate sale. Key Details (from machine label & display): Model: SC-R5010L / K391A Serial No.: X7QP000006 Power: 200–240V / 50–60Hz (European spec, CE certified) Operation Report (as shown on screen): Total Print Area: 38,231.59 m² Total Media Feed Length: 33,162.7 m Total Carriage Pass: 4,060,051 Printer Features: UltraChrome RS resin ink system (6 colours + Optimizer + Maintenance Liquid) Dual bulk ink unit (2 × 1.5L pouches with hot-swap function) PrecisionCore Micro TFP printhead 64" (162 cm) print width Odourless, water-based resin ink – suitable for vinyl, banner, textile, canvas, wallpaper, film Immediate lamination capability LCD touchscreen control panel Hodpeytrfdefx Acvsk Nozzle check printed on date of listing (11.03.2026) – all colour channels firing Included: Printer main unit with bulk ink system Auto take-up reel system All ink channels present Extra inks that we have in-house The printer is located on a pallet. Inspection welcome. Suitable for signage, wide-format print shops, wallpaper and production environments.

Condition: like new (used), Year of construction: 2025, operating hours: 100 h, functionality: fully functional, turning height: 1,500 mm, workpiece weight (max.): 8,000 kg, turning diameter: 1,700 mm, feed length X-axis: 1,100 mm, feed length Z-axis: 1,200 mm, faceplate diameter: 1,450 mm, feed rate Y-axis: 300 m/min, feed rate Z-axis: 300 m/min, total width: 5,000 mm, total length: 5,500 mm, rapid traverse X-axis: 4,000 m/min, rapid traverse Y-axis: 4,000 m/min, type of input current: three-phase, rotational speed (max.): 200 rpm, rotational speed (min.): 200 rpm, spindle speed (max.): 200 rpm, table load: 8,000 kg, year of last overhaul: 2025, travel distance X-axis: 1,200 mm, travel distance Z-axis: 1,200 mm, stroke length: 1,200 mm, disc diameter: 1,450 mm, overall weight: 21,000 kg, tool weight: 3,000 g, power of the servo motor: 40,000 W, repeat accuracy: 0.01 mm, Equipment: documentation/manual, CNC vertical lathe SC17, completely modernized in 2025 with Fanuc control. The machine is in very good condition, fully functional, live and available for inspection and testing. Technical specifications: Maximum turning diameter: 1700 mm Maximum workpiece height: 1500 mm CNC: Fanuc (complete modernization in 2025) Condition: functional, live Type: vertical turret lathe Advantages: Recent modernization - no additional investment required Reliable Fanuc control system Suitable for large workpieces Video available on request. Price on request Hedpsyxfgmofx Acvjk

Condition: ready for operation (used), Year of construction: 1987, VTL SC 17 Chuck diameter 1450 mm max turning 1700 mm Job heigth 1200 mm Table rpm 2,22 -200 rpm Hjdpfx Aceq Ixdfjvsk Main motor 55kw Weigth -21 to

Condition: new, - NEW-descriptionCutting plane directly on the saw bladeHeavy steel and cast iron constructionPrecision-guided format sliding carriage made of aluminium,anodized as standardLarge-area table extension guided on a telescopic arm andlongitudinally adjustableExtendable aluminum telescopic fence, angle adjustable with professionalstop flapsRip fence with quick release and fine adjustmentLarge work table made of milled gray cast iron stays permanently flatThe standard table extension and table extension enable easy work with larger workpiecesQuiet running and precise cutsEquipped with a powerful three-phase motorThe large dimensioned cast iron sawing unit is attached twice to the cast iron table and guarantees stability, precision, smooth running and a long service lifeMaximum cutting height is also achieved with the built-in scoring deviceEquipment details:Double cradle saw unitGenerously dimensioned, made of steel/cast ironClose to the saw blade, supported on both sides for precision, smooth running and a long service lifeAdjustable in height and up to 45° with a crankMaximum cutting height is also achieved with the built-in scoring deviceAlso available with scoring unittelescopic stopExtendable telescopic stop up to max. 2550 mmAngle adjustableWith professional stop flapsAluminum sliding carriageWith a thousand times proven ball contact systemInsensitive to dust and dirt due to minimal contact point between ball and trapezoidal rail10-year Holzkraft guarantee on wear and tear on the guidewaysRip fence with round rod guideWith fine adjustment and quick releaseStable round rod guide made of ground steel with a diameter of 45 mmCan be folded down as standard for cutting large workpiecesTechnical specifications:Dimensions and weightsWeight (net) approx. 380 kgConnection suctionSuction connection diameter 120 mmSuction connection diameter saw blade protection 60 mmMachine body length 1388 mmWorking area length 1000 mmMachine body width/depth 689 mmWorking area width/depth 2000 mmSpace required length 5118 mmSpace requirement width/depth 3830 mmelectrical dataConnection voltage 400 VDrive motor power 5.0 kWPhase(s) 3 PhNominal operating mode drive motor S6Type of current ACDuty cycle drive motor 40%Mains frequency 50 HzSliding carriage and tableFormat slide length 2250 mmTable length 840 mmFormat sliding carriage width 270 mmTable width 560 mmFormat sliding carriage height 124 mmTable height 900 mmcircular saw unitCutting width with rip fence 900 mmMax. cutting height 90° 90 mmMax. cutting width to the left of the saw blade 2310 mmMax. cutting height 45° 63 mmtrimming length 2250 mmSaw blade diameter 315 mmSaw blade inclination 90 - 45°Saw blade speed 4000 rpmArt. No. 5504323Ausziehbarer Teleskop-fence to max. 2550 mmWinkeladjustableMit Profi-AnschlagklappenAluminium-sliding tableMit tausendfach bewährtem KugelkontaktsystemStaub- and schmutzunempfindlich durch minimalen Berührungspunkt zwischen Kugel and Trapezschiene10 Jahright hand Holzkraft-guarantee on abrasion der Führungsbahnenrip fence with round rod guidingMit fine adjustment and quick clampingStabile round rod guiding aus geschliffenem steel with 45 mm diameterSerienmäßig tiltable for den Zuschnitt großer WerkstückeTechnische Daten:dimensions and Gewichteweight (Netto) ca.   380 kgAnschluss Absaugungsuction nozzle diameter   120 mmsuction nozzle diameter Sägeblattschutz   60 mmAufstellinformationenTransportbreite   900 mmErläuterung required spaceDie d... Hedpfx Ajvyuqfjcvok

Condition: new, - NEW -- Cutting plane directly on the saw blade- Large dimensioned cast iron saw unit double on the cast iron tablefastened - guarantee for stability, precision, smooth running and long service life- Precision-guided format sliding carriage made of aluminium, standardanodized- 10-year HOLZKRAFT guarantee on wear and tear on the guideways of thesliding carriage- Rip fence with round rod guide and fine adjustment as standard- Large work table made of milled gray cast iron- Quiet running and precise cuts- Enable standard table widening and table extensioneasy work with larger workpieces- Extendable aluminum telescopic fence with angle adjustment andtwo professional folding stops-Made in ItalyTECHNICAL SPECIFICATIONSDimensions and weightsWeight (net) approx. 295 kgConnection suctionSuction connection diameter 120 mmSuction connection diameter saw blade protection 60 mminstallation informationTransport width 700 mmMachine body length 802 mmMachine body width/depth 615 mmSpace required length 3860 mmSpace requirement width/depth 2750 mmExplanation of space requirementsThe dimensions take into account maximum travel distances or usable lengthsWorking area length 1000 mmWorking area width/depth 2000 mmExplanation of work areaPlease add the specified dimensions to the space required to calculate theto obtain the recommended free installation space for the ctrical dataConnection voltage 400 VMains frequency 50 HzDrive motor power 4.0 kWRated operating mode drive motor S 6Duty cycle drive motor 40%Sliding carriage and tableFormat slide length 1600 mmFormat sliding carriage width 270 mmFormat sliding carriage height 124 mmTable length 1020 mmTable width 325 mmTable height 860 mmcircular saw unitCutting width with rip fence 900 mmMax. cutting width to the left of the saw blade 1660 mmtrimming length 1600 mmSaw blade inclination 90 - 45°Max. cutting height 90° 100 mmMax. cutting height 45° 79 mmSaw blade diameter 315 mmSaw blade speed 4000 rpmFURNISHINGAnodized aluminum format sliding carriageHandle for sliding carriagetrimming frameSaw rip fence with round rod guideStops Two professional folding stopstrimming shoeeccentric clamptable extensiontable extensionsaw blade guard&nbsp, Hedpfx Acovyup Usvsk

Condition: new, The work table made of heavily ribbed gray cast iron andguarantee the base made of welded steelTorsion resistance and vibration-free workingHigh quality machine at a real entry-level priceUnique in this performance class:- Format sliding carriage made of anodized aluminum for the highestcutting precision- Cutting plane directly on the saw blade- Swiveling saw blade unit from 90 - 45 °- Table bracket with aluminum crosscut fence and adjustableStop flap for plates and large workpieces- Rip fence with round bar guide and fine adjustment- Powerful engine- Made in EuropeDimensions and weightsWeight (net) approx. 170kgDust extraction connectionExtraction nozzle diameter 120mmExhaust nozzle diameter saw blade protection 60mmTransport width 680 mmWorking area 1600 mm x 2300 mmSpace requirement 2613.5 mm x 2134 mmPlease add the specified dimensions with the space required to obtain the recommended free space for the dimensions take into account maximum travels or usable lengthsElectrical data400 V supply voltageDrive motor 1.8 kWPhase (s) 3 PhNominal operating mode drive motor S6Current type ACDuty cycle drive motor 40%Mains frequency 50 HzSliding carriage and tableFormat sliding table 1140 mm x 200 mm x 70 mmTable 1024 mm x 224 mm x 900 mmsaw unitCutting width with rip fence 700 mmMax. Cutting height 90 ° 67mmMax. Cutting width to the left of the saw blade 1200 mmMax. Cutting height 45 ° 40mmEdging length 1200 mmSaw blade diameter 250mmSaw blade inclination 90 - 45 °Saw blade speed 3900min¯¹scope of deliverytable extensionAnodized aluminum sliding tableRip fence with round bar guide and fine adjustmentAluminum folding stopEccentricItem No. 5504113 Hodpfjvxr S Rox Acvsk

Condition: used, used, good condition Make Steton Type SC 400 / 3200 CE type tested Motor boosted 6.5 kW Trolley length approx. 3200 mm Cutting width approx. 1300 mm max. blade diameter 400 mm swiveling up to 45° scoring unit parallelogram protection Hodpfsvyt D Dsx Acvjk control panel above Rip fence with electrical adjustment Table top extension approx. 400 x 800 mm Electric height adjustment Swivel adjustment electric Digital display: - cutting angle - Rip fence - Rotational speed Extraction connection D 120 / 60 mm Space requirement approx. LxWxH mm 3400x2300x1700 Weight approx. 1000 kg Storage location 97447 Gerolzhofen Handover in the current condition as seen - free loaded -

Condition: refurbished (used), battery capacity: 775 Ah, battery voltage: 48 V, total height: 785 mm, total length: 832 mm, total width: 631 mm, Tested forklift battery for your forklift - 48V 5PZS 775AH - DIN A + 1 year warranty + Including aquamatic (automatic watering system) + Including end discharge cable & REMA 320 plug (other plugs available on request) + Capacity: min. 90-100% (C5 capacity protocol included upon delivery) + Year of manufacture: 2024 Dimensions: Length: 832 mm Width: 631 mm Height: 785 mm Weight: approx. 1,150 kg Compatible with the following models and others: Linde E 16 - 335-00 Linde E 16 - 386-00 Linde E 16 CH - 1275-00 Linde E 16 H - 386-00 Linde E 16 H - 386-02 - side battery change Linde E 16 P - 322-00 Linde E 16 P - 335-00 Linde E 16 PH - 1275-00 Linde E 16 PH - 386-00 Linde E 16 PH - 386-02 - side battery change Linde E 18 - 386-02 - side battery change Linde E 18 P - 322-00 Linde E 18 P - 335-00 Linde E 18 PH - 386-00 Linde E 18 PH - 386-02 - side battery change Linde E 18 Z - 322-00 Linde E 20 P - 335-00 Linde E 20 PH - 1275-00 Linde E 20 PH - 386-00 Linde E 20 PH - 386-02 - side battery change Linde E 20 PH EVO - 386-02 Hedpfx Acowzvwhovok Linde EG 16 - 1275-02 - side battery change Linde EG 16 H - 1275-02 - side battery change Linde EG 16 P - 1275-02 - side battery change Linde EG 16 PH - 1275-02 - side battery change Linde EG 20 PH - 1275-02 - side battery change Linde R 20 - 1120-00 Linde R 20 G - 1120-00 Crown SC 3013 Other common battery sizes available on request. Transport can be arranged.

Condition: refurbished (used), battery capacity: 375 Ah, battery voltage: 48 V, total height: 625 mm, total length: 827 mm, total width: 411 mm, Tested forklift battery for your forklift - 48V 3PZS 375Ah - DIN A + 1-year warranty + Includes Aquamatik watering system + Includes end connectors & REMA 320 plug (other plug types can be installed on request) + Capacity: min. 90-100% (C5 capacity test protocol included with delivery) + Year of manufacture: 2024 Dimensions: Length: 827 mm Width: 411 mm Height: 625 mm Weight: approx. 560 kg Suitable for the following models and others: Linde E 16 - 386-00 Linde E 18 - 386-02 - side battery change Linde P 50 Z LONG - 368-00 Linde P 60 - Linde P 60 - side battery change Linde P 60 Z - 126-00 Linde P 80 - Hsdpfewzvtiex Acvjk Linde P 80 - side battery change LInde T 30 R - 143-00 Linde W - side battery change Still LTX 70 Still R 06-06 Jungheinrich EZS 570 Crown RT 3000 Crown SC 1013 Crown SC 1016 Crown SC 3013 Crown SC 3210 Crown SC 3210-1.3 Crown SC 5310-1.3 Crown SCT 6010 Nissan AS2N1L13Q OM-Pimespo-Fiat XE 12 Simai TE80IXB Common battery sizes available – please enquire. Transport available.

Condition: refurbished (used), battery capacity: 500 Ah, battery voltage: 48 V, total height: 630 mm, total length: 979 mm, total width: 434 mm, Tested forklift battery for your forklift - 48V 4PZS 500Ah - special battery tray + 1 year warranty + includes aquamatic system + includes final discharge cable & REMA 320 plug (other connectors can be installed on request) + Capacity: min. 90-100% (C5 capacity protocol provided upon delivery) + Year of delivery: 2024 Dimensions: Length 979 mm Width 434 mm Height 630 mm Weight: approx. 750 kg Suitable for the following models and others: Still R 20-14 Jungheinrich ETV A 12.5 Toyota 2FBE15 Toyota 5FBE15 Toyota 5FBE18 Toyota 7FBE10 Toyota 7FBE15 Toyota 7FBRE16 Toyota 8FBE15 Toyota 8FBE15T Toyota 8FBKT16 Toyota 8FBMT15 Toyota FTB15-E2S Toyota/BT RR-B 2 Toyota/BT RR-B 3 Toyota/BT RR-M 14 Toyota/BT RR-M 3 Toyota/BT RR-M 6 Toyota/BT RR-N 3 Crown 3.0 Crown SC 4220 Crown SC 5320-1 Crown SCT 6020 Atlet ET 150 Atlet ET 180 Balkancar EV698 CTC PLANET PL416/420/423 Caterpillar EP15CPDJ Caterpillar EP15PNT Caterpillar EPB4A Daewoo B13 Daewoo B13 T-2 Daewoo B15 Daewoo B15 T Daewoo B15 T-2 Daewoo B15 T-5 Daewoo BT15 Datsun 150 Doosan B13T Doosan B157-5 Doosan B15T-5 Doosan B15T-7 Doosan B20T-2 Heli CPD 15 Heli CPD 18 Heli CPD 25 Hubtex MQ 35 Hyster J1.80-2.00XMT Hyundai 15BT-7 Hyundai 15BT-9 Hyundai 16B-9 Hyundai 16B-9F Hyundai 20BRJ-7 Hyundai 25BRJ-7 Hyundai HBT18T-S Komatsu FB15-12 Komatsu FB15M-2 Komatsu FB18 Manitou ME 313 Manitou ME 315 Mitsubishi FB13PNT Mitsubishi FB15PN Nichiyu FBT13 Nichiyu FBT15-30 Nichiyu FBT18 Nichiyu FBT20PN Nissan 01L150 Nissan 1N1 TX Nissan 1N1L18HQ Nissan 1N1L18Q Nissan A1N1L18Q Nissan N01L150 Nissan N01L15U Nissan TX15 Hsdowzvq Ujpfx Acvjk Nissan TX18 Nuova Detas SE 315 OMG ERGAS 16 TA 4 TCM FTB18-E1 UniCarriers TX3-15S Yale ERP 16 ATF Yale ERP 18 ATF Common battery sizes available – please inquire. Transport possible.

Condition: good (used), Year of construction: 1995, Sakurai SC 102DX Year: 1995 Max speed: 5500 sh/h Hodpfx Aceyxazfevsk Max sheet size: 105 x 705 cm Min sheet size: 49 x 29,7 cm Trumax dryer Trumax stacker Available immediately Very good working condition

Condition: used, maximum load weight: 6,470 kg, overall weight: 9,500 kg, axle configuration: 2 axles, first registration: 10/2001, next inspection (TÜV): 06/2026, loading space length: 6,150 mm, loading space width: 2,460 mm, loading space height: 2,350 mm, loading space volume: 35 m³, Equipment: ABS, * ABS * BPW axles * 5-chamber rear lights * Height-adjustable coupling device via offset plate * Front support ----Body: flatbed, sliding curtain left + right, 2-piece aluminium sideboards (600 mm), foldable centre post, hardwood floor, lashing rings. Loading height approx. 1,000 mm Sale only to commercial customers. FOR EXPORT, ONLY THE NET PRICE IS PAYABLE!!!! ALL INFORMATION WITHOUT WARRANTY, INCLUDING EQUIPMENT AND ACCESSORIES. Our general terms and conditions (see imprint) form the basis of all purchase contracts, invoices, pro forma invoices, orders, and sales negotiations. Hjdpfx Acjx En H Nsvok

Condition: used, mileage: 286,169 km, power: 324 kW (440.52 HP), first registration: 01/2017, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, next inspection (TÜV): 01/2026, color: blue, gearing type: mechanical, emission class: euro6, loading space volume: 10 m³, loading space length: 4,900 mm, loading space width: 2,380 mm, loading space height: 900 mm, Equipment: ABS, air conditioning, all wheel drive, * Sun visor * ABS * Radio * Cruise control * Electric windows * Electric adjustable mirrors Hodpfsv Ntn Iex Acvjk * Heated mirrors * Rear window * Driver's comfort seat * Heated seats * Transfer case * Low-range gear * AP axles * Steel bumper * Orange rotating beacon * Upper air intake * Air dryer * Tandem trailer hitch * Duomatic air connection * Hydraulic connection for trailer * Longitudinal and transverse locks * 16-speed * Suspension: Leaf-air * Payload: 13175 kg * Continuous brake: Engine brake ----Body: Meiller 3-sided steel, Bordmatic left, raised bulkhead with excavator protection, jet side walls. Sale to commercial customers only. FOR EXPORT, ONLY THE NET PRICE IS DUE!!!!! ALL INFORMATION IS PROVIDED WITHOUT GUARANTEE. EQUIPMENT + ACCESSORIES.The basis for all purchase contracts, invoices, pro forma invoices, orders, and sales discussions are our general terms and conditions (see imprint).

Condition: used, mileage: 286,169 km, power: 324 kW (440.52 HP), first registration: 01/2017, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, next inspection (TÜV): 01/2026, color: blue, gearing type: mechanical, emission class: euro6, loading space volume: 10 m³, loading space length: 4,900 mm, loading space width: 2,380 mm, loading space height: 900 mm, Equipment: ABS, air conditioning, all wheel drive, * Sun visor * ABS * Radio * Cruise control * Electric windows * Electric adjustable mirrors * Heated mirrors * Rear window * Driver's comfort seat * Heated seats Hjdov Ntn Uopfx Acvek * Transfer case * Low-range gear * AP axles * Steel bumper * Orange rotating beacon * Upper air intake * Air dryer * Tandem trailer hitch * Duomatic air connection * Hydraulic connection for trailer * Longitudinal and transverse locks * 16-speed * Suspension: Leaf-air * Payload: 13175 kg * Continuous brake: Engine brake ----Body: Meiller 3-sided steel, Bordmatic left, raised bulkhead with excavator protection, jet side walls. Sale to commercial customers only. FOR EXPORT, ONLY THE NET PRICE IS DUE!!!!! ALL INFORMATION IS PROVIDED WITHOUT GUARANTEE. EQUIPMENT + ACCESSORIES.The basis for all purchase contracts, invoices, pro forma invoices, orders, and sales discussions are our general terms and conditions (see imprint).

Condition: used, machine/vehicle number: 005693, Max. panel width: 1200 mm Max. panel length: 3200 mm Hjdpfx Acjyhbfpevok Max. panel stack height from the ground: 1600 mm Lifting capacity: 100 Kg Work capacity: 16 Cycles/min Movement system: suction cups.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2011, operating hours: 781 h, Trench roller No. 2 Wacker Neuson RT 82 SC 2, year of manufacture 2011, 781 operating hours, weight 1,490 kg, Kohler diesel 15.5 kW, serial no. 20032212, remote control (radio + cable), fully functional. Hodpfsybag Ejx Acvek

Condition: used, machine/vehicle number: 007684, Max. panel width: 1200 mm Max. panel length: 3000 mm Max. panel stack height from the ground: 1800 mm Movement system: suction cups. Hodpfovzikcsx Acvok

Condition: good (used), MOMAC SC 200 NC teach-in turning machine Fagor 8050 TC CNC control year of construction 1999 max. turning diameter 400 mm max. turning diameter above bed 200 mm max. turning length 1000 mm speed 0-2300 rpm Hedjtt Atdspfx Acvek spindle passage 52 mm tool changer 8 positions 1x fixed pair of glasses 1x glasses moving including tool holders/extra jaws and documentation machine is connected for inspection

Condition: used, mileage: 483,726 km, power: 355 kW (482.67 HP), first registration: 04/2022, fuel type: diesel, overall weight: 1,800 kg, next inspection (TÜV): 04/2026, brakes: retarder, gearing type: automatic, emission class: euro6, Equipment: ABS, electronic stability program (ESP), parking heater, soot filter, FT XF 480 SC LD Technically permissible maximum chassis weight: 19,500 kg Headlight beams for right-hand traffic Electric trailer connection 24V/15-pin cable: 15-pin + EBS Alternator 80 A, batteries 2x 230 Ah Maximum ambient temperature: 38°C Antennas: AM/FM, 2x mobile, GNSS Mechanical cab suspension Type plate: Standard (EC) Idle shutdown automatic, 5 minutes 12-speed TraXon gearbox 12TX2210 DD, 16.69-1.00 OBD, Euro VI Step E Auxiliary heater with waste heat pump and timer Automated gearbox with manual mode – full version Front axle(s): 315/60R22.5 Kingpin diameter: 2 inches Rear: 11.5 t, air suspension, SR1344 Halogen headlights with height adjustment Emissions standard Euro 6 Top air intake Max. permissible combined weight (driven axle): 50,000 kg, Class 3 Traction control (ASR) Space Cab – driver cabin Aluminum fuel tank 400 l, height 580 mm Driven rear axle(s): 295/60R22.5 Drive rear axle with disc brakes Parking brake with test position Front underrun protection Convex main mirror Pneumatic trailer connection, swivel coupling Exhaust pipe horizontal, low Body power socket at cab front Cold foam mattress for lower bunk LED work lights AdBlue® tank 90 l Automated gearbox, TraXon, 12 speeds Eco-Fuel Interior trim color: Dark Sand DAF Connect Passenger seat: Basic Curtains, no partition curtain Fuel tank left Adaptive Cruise Control with FCW and AEBS-3 Front axle 1: 7,500 kg, load index 154 Type approval for complete vehicles (WVTA) Rear axle 1: 11,500 kg, load index 145 Steel air reservoirs Cab, interior decor Delta black Safety nets on both bunks Door trim: loosely woven fabric Hedsxthpqepfx Acvsk Soft-touch steering wheel, black Rear axle ratio: 2.05 EAS unit right, Low Deck Electronic Stability Control (VSC) Driver seat armrest Glass roof hatch, electric operation Operation of non-sliding fifth wheel Fog lights Lane Departure Warning System Electric windows Pollen filter Mechanical differential lock Brake performance monitoring LED daytime running lights Universal FMS interface Driver Performance Assistant Storage compartment for trailer connections CO2 indicator: Y Central locking Longitudinal frame members 260/7.0 mm, with front internal reinforcement Lower side cover, cab step and fender grey Upper bunk Reverse warning system MX-13 engine, 355kW/483HP, cab badge: 480 ZF Intarder Front: 8.00 t, air suspension, 161 N Horizontal battery box and spare wheel holder right Fifth wheel lead: 670 mm Adjustable roof spoiler for Space Cab JOST JSK37ME, cast iron, 140 mm, D126-15t Wheelbase 3.80 m / rear overhang 0.87 m Cool box or refrigerator Chassis protection bar Alcoa aluminum wheels, brushed, 32 mm Speed limiter setting: 85 km/h Automatic cab climate control Predictive Cruise Control Radio/USB player, two speakers Truck phone ECAS remote control with advanced functions Driver’s seat: Luxury Air Blind spot camera All information without guarantee. Subject to errors and prior sale.

Condition: used, machine/vehicle number: 8427, * Amazone Horse Hopper 1500 Smart Cut * Working width: 1.50 m * 1,500 L collection hopper capacity * Tractor 3-point linkage * H60 wing blades * Support rollers * Mulching device * PTO shaft with overrunning clutch * Collection hopper with hydraulic floor emptying * Rotation speed: 2,650 rpm Hjdpfx Asrhy H Rscvok * Fill level indicator -----Internal vehicle number: 8427 WhatsApp support available! If you have any questions about the machine or need further information, feel free to contact us conveniently via WhatsApp. Whatsapp Whatsapp ----Subject to errors and prior sale.

Condition: excellent (used), - Model: ET 94/SC - Serial number: SN006968 - Year of manufacture: 2014 - Number of decks: 4 - Number of doors: 1 Hedewxmnxepfx Acvek - Internal dimensions (WxD): 920x1300 mm - Oven dimensions (WxDxH): 1440x2010x2720 mm - Oven height + extractor: 2300 + 420 mm - Total oven length with integrated loader: 3870 mm - Loading bay with integrated loader (E): 1860 mm + 370 mm - Baking surface: 4.80 m² - Power: 20.04 kW - Voltage: 400 V - Weight: 2000 kg - Sold with integrated stainless steel loader - Refurbished equipment: the equipment is prepared upon order; lead times for collection and return are agreed at that time (please request price after refurbishment) The listing was translated automatically. Translation errors are possible.

Condition: refurbished (used), Year of construction: 2016, BVM sc 4530 Hedpjwbd Uzofx Acvjk