Used Sawing Machine for sale (91,580)

Condition: new, Good brand new No. 1 available for immediate delivery! Warranty " CE " Made in Italy Gjdpfsfibfgex Abbjkd Cutting capacity : 0° = round tube mm 230 - square mm 220 - rectangle mm 170 x 300 45° = round tube mm 200 - square mm 180 - rectangle mm 180 x 230 60° = tubular round mm 130 - square mm 120 - rectangle mm 110 x 130 TECHNICAL DATA AND STANDARD EQUIPMENT: Vertical rotation on pivot with adjustable conical bearings without backlash. Belt drive with two-speed motor and special reducer with bronze gear and hardened and ground worm screw. Appropriately sized flywheels. Sturdy belt guides with watertight bearings and adjustable widia plates. Tensioning of the band obtained by means of an electromechanical device with blade rotation microswitch control. Vice with rapid locking device Safety device on the flywheel cover, on the control knob and on the blade. Cutting thickness 1,2 mm Cutting range from 0 to 60° right Adjustable stop for cuts of the same size Low voltage system 24 V 0.06 kW electric pump for belt cooling The basic characteristics of the machine (rigidity of the blade support, flywheel sizing, belt guides, belt tensioning) have been carefully studied in order to avoid belt yielding, increase its life, improve linearity and cutting time.

Year of construction: 2025, condition: new, Double head sawing machine FOM INDUSTRIE BLITZ ALVA 500 A 6m with Ø 500mm blades. Maximum cut between the two heads: 5m In stock Equipment: - Two Ø 500mm tungsten carbide saw blades - Head tilting: 90°- 45°- 22.5° and intermediate angles achieved using stops - Cutting area guard kit - Two pneumatic vertical vices Gkedpfxegkpv Ds Abbjd - Three pneumatic horizontal vices - Movable head roller table (2,5m) - Two retractable pneumatic intermediate profile support - Profile height measuring device - Spray mist blade lubrication system - Set up for the extraction of chips and fumes - Control RIGHEL - Hydro-pneumatic feeding of saw blades - First and second head angle readout kit - Software for highlighting profile sections in DXF format - Software for step-by-step cutting with two-handed command - Software for special length cuts (over and under size and super undersize) and 45° trim cut - Label printer - USB port - Ethernet for network connection - Aspiration system

Year of construction: 2025, condition: new, functionality: fully functional, The UMG-119.17 rough log splitting machine is designed to cut 2.5 meter long logs in half. The logs are fed into the machine perpendicular to the direction of movement, which ensures high cutting performance, 20 cuts per minute. Godowd Nu Eepfx Abbokd

Year of construction: 2000, condition: good (used), Weight: 4600 kg Dimensions LBH: 4350 x 1070 x 2690 mm Saw blade dimensions: 8250 x 54 x 1.6 mm Fright basis: EXW with disassembling Price: on demand The 2000 Kaltenbach KBS 1001 DG band saw is a semi-automatic, high-performance band saw for cutting and drilling profiles. The Kaltenbach band saw has a two-metal saw blade M42 measuring 8250 mm x 54 mm x 1.6 mm. The motor of the saw is frequency controlled and has a driving power of 7.5 kW. The cutting speed is continuously adjustable between 16 - 100 m / min. -Working height is 450 mm, working width 1000mm. -drill diameter:10- 40 mm -material dimension max: 1000mmx450mm -material dimension min:65mmx65mm -3 drilling axes, one vertical and one horizontal Gjdpfx Ashkhumsbbskd -drill feed rate of 20-200mm/min -5 tool changer position per axis with an iso 40 tool holder The machine can transmit data in different ways: 1. The operator is programmed directly on the control panel. 2. The data is entered into the job preparation via computer and then imported as a CSV file. Data transfer takes place via a floppy disk or network. 3. Data are entered using CAD programs. DSTV data is imported via a floppy disk or network.

Year of construction: 2011, condition: used, Technical details: saw blade diameter: Ø 400 - 500 mm hole of sawblade: Ø 50 mm saw blade rpm: 6 - 70 / steples U/min cutting range 90 degrees: round: Ø 140 mm cutting range 90 degrees: square: 140 x 140 mm cutting range 90 degrees: flat: 400 x 30 / 345 x 70 / 300 x 95 mm Table dimensions: LxB: 620 x 670 mm height over floor: 1000 mm total power requirement: 8 kW weight of the machine approx.: 1170 kg The machine is currently in the technical department. SEMI-AUTOMATIC CIRCULAR SAW - PROFILE CIRCULAR SAWING MACHINE Profile circular saw with two-hand control for sawing materials: steel as solid material, pipes and profiles, taking into account the cutting area. Cutting speed depends on the material to be sawn Clamping pressure 30 bar Clamping stroke Øxstroke: 100 x 160mm Hydraulic pump Operation via control panel / two-hand operation Coolant system with pump Gsdju Niuhspfx Abbskd *

Condition: used, Year of construction: 2001, Technical details: Gjdewvbk Ajpfx Abbjkd saw blade diameter: 250/285 mm cutting diameter: 50-70 mm total power requirement: 5,5 kW weight of the machine ca.: 1 t Saw type: circular saws Cutting direction: straight cut Automation: automatic Material type: structural steels, stainless steels, tool steels Material width: 60 mm Material height: 70 mm *

Year of construction: 2024, condition: new, 5 axis double head sawing machine FOM INDUSTRIE KEOPE E5 6.6 m Machine in stock Equipment: - No.2 carbide tungsten saw blades Ø 600 mm - Minimum cutting capacity between two heads: 470 mm (with heads at 90°) - Maximum cutting capacity between two heads: 6.6 m - No.4 vertical vices and No.2 horizontal (for step-by-step operation) - Micro-drop pure oil blade lubrication system - Set up for the extraction of chips and fumes - Blade motors, three phase 5 HP (3.7 kW) - 230/400 V- 50Hz. Blade rotation speed 2400 RPM - Head rotation between 22.5° and 140° (Y and Z axes) with electronic control (vertical axis) - Internal blade inclination between 90° and 45° (W and U axes) with electronic control (horizontal axis) - Handling of mobile head (X axis) with electronic control - Mobile head max. speed 25 m/min. - Hydraulic saw blade feed (adjustable blade exit speed - quick return) - Profile lifting kit - Loading roller conveyor length 2.2 m, width 400 mm (on mobile head) - No.3 intermediate pneumatic retractable support - Chip conveyor belt - Label printer - FSTCut software Godod Izq Hopfx Abbskd - Software for special cut-off (beyond measure and super minimum) and profile bevel cut for 45° cuttings - Step-by-step cutting software, complete with 1 extra surface on fixed head, 90° cuts, two-hand control - Vacuum cleaner

Year of construction: 2021, condition: as good as new (ex-display), Single head sawing machine with up-feed blade Ø 550 mm and manual positionning of the vertical axis FOM INDUSTRIE PANDA 550 with measuring roller conveyor ASSOMAK VS 7m and inlet conveyor PORTER 4,2m, year 2021 Condition: as new Configuration XZ-10493 PANDA 550: - Ø550 mm tungsten carbide saw blade - Grades digital display (manual rotation) Gksdpfxjphlnqj Abbsd - Hydro pneumatic advance of the blade (adjustable blade exit speed quick return) - Rotation from 20° Lh to 20° Rh on vertical axis - Minimum quantity lubrication (MQL) with pure oil - Working pressure: 7 bar - Saw blade motor, three phase (4 kW) - 2800 rpm, 230/400 V - 50 Hz Oprions installed on the machine: - IV222100 Vacuum cleaner for extraction of chips and fumes Configuration XK100273 ASSOMAK VS 7m: - Minimum cut 0 mm - Maximum cut 7 m - Measurement reading by encoder - Mobile carriage slides along wheels in polymer with belt-driven - Positioning precision ± 0,5 mm - Loading capacity per linear meter: 10 Kg - Width of bar resting surface: 200 mm - Work table height adjustment range 820-990 mm - Length stop with sliding surface under the work table, to give constant reference under all working conditions - Pneumatic stop locking - Belt-driven positioning Configuration XK201569 PORTER 4,2m: - Working length 4,2m - Loading capacity per linear meter: 10 Kg - Width of bar resting surface: 200 mm - Work table height adjustment range 820-990 mm

Condition: ready for operation (used), total height: 2,460 mm, total length: 1,725 mm, total width: 1,460 mm, throat depth: 700 mm, empty load weight: 1,120 kg, nominal power: 41 kW (55.74 HP), Model: LC80-01 / ЛС80-01 Gsdpexq Hqhofx Abbjkd Uitgerust: - Nieuwe elektrische kast - Siemens DC 800 — een DC-aandrijfregelaar (regelt het toerental, koppel en de draairichting van de motor, en zorgt voor een soepele start, remwerking en systeembescherming.) 2 KEER OP VOORRAAD Table dimensions: 1000 x 1000 mm Max height of workpiece: 400 mm

Condition: used, Year of construction: 1998, Used machine Year of manufacture: 1999 Equipment and technical data: Godpfxjxvnmue Abbokd - Cutting length: 2,600 mm - Cutting width: 1,000 mm - Cutting height vertical: 0–75 mm - Cutting height at 45°: 0–53 mm - Length stop by scale at angle fence, extendable up to 3,250 mm - Anodised version - Swivelling up to 45° - Digital display of swivelling angle - Motor: 5.5 kW - Speed: 4,200 rpm - Saw spindle: 30 mm - Saw blade diameter: 300 mm - Table extension: 840 mm - With DUPLEX double mitre fence Dimensions: 2,600 x 1,700 x 1,300 mm Weight: approx. 880 kg Availability: short notice Location: Flörsheim

Condition: excellent (used), Year of construction: 2002, operating hours: 1,870 h, Tilting Panel Saw T 73 by Martin with 3-axis scoring unit and 3m table Sliding table length: 3000mm Saw blade tilting from 0 to 46 degrees Speeds: 2800, 4000, and 5500 rpm with electronic speed display Drive motor: 5.5kW with automatic motor brake Saw blade diameter up to 500mm Max. cutting height: 170mm Cutting width up to 1100mm, adjustable from the front via handwheel and manually movable Tilting angle and height adjustment electrically controlled Crosscut fence with 2-point stop up to approx. 3350mm Parallelogram cross table with digital angle display and roller Folding rip fence Extraction ports: 120 + 100mm Sliding carriage can be locked in any position Handle Edging shoe 1 set of plastic saw blades with matching 3-axis scoring unit, freshly sharpened 3 riving knives 3-axis scoring unit, fully electrically adjustable while the machine is running 2 safety hoods Angle stop for acute angles Tool compartment Emergency stop switch Operating manual CE mark The machine shows minor signs of use on the anodized sliding table. Small cuts in the sliding table have been repaired. Original paintwork, only partially touched up. Excellent condition as shown in the original photos. Dimensions approx. 3300 x 3750 x 1600mm (LxWxH). Weight approx. 1950kg. Gkedpfxsxtvcxs Abbod The machine can be demonstrated at our premises by appointment. We only offer machines that are ready for demonstration in our warehouse. Please see 'more offers from this supplier.'

Condition: good (used), Year of construction: 1988, Panel saw Manufacturer: Altendorf Model: F45 Year of manufacture: 1988 Sliding table length: 320 cm Cutting width: 100 cm Cutting height: approx. 153 mm Max. saw blade diameter: 450 mm Gkjdpfx Ajxvyamobbsd Power: 5.5 kW Speeds: 3 / 4 / 5 / 6,000 rpm Scoring unit: No Motor brake: No

Condition: ready for operation (used), throat depth: 550 mm, empty load weight: 900 kg, nominal power: 42 kW (57.10 HP), frequentiecontrole Table dimensions: 600 x 760 mm Max height of workpiece: 430 mm Sawspeed: 120x1200 m/min Length of band saw: 4700 x 27 mm Gksdpfx Ajxq Hqbobbed

Condition: like new (used), Year of construction: 2023, functionality: fully functional, Circular saw Gedpjun Rhrefx Abbjkd Manufacturer: Felder Type: K 740 S Year of construction: 2023 Carriage length: 2.800 mm Cutting width: 1,250 mm Cutting height: 140 mm Power: 7.2 kW Speed: 4,000 rpm Scorer: Yes Motor brake: Yes Height and angle adjustment: Electric

Condition: ready for operation (used), total height: 3,020 mm, total length: 3,300 mm, total width: 5,100 mm, throat depth: 1,060 mm, zware dubbelkoloms lintzaag voor het zagen van hooggelegeerde staalsoorten automatische invoer van het werkstuk met automatische herpositionering CNC-gestuurde variabele snelheid voor invoer en zagen spaantransportband uitgerust met volledig gemotoriseerde Weisshaupt-rollenbanen: - 10,3 meter invoerrollenbaan (buiten) met 2 hydraulische klemmen voor de contouren van het werkstuk - 9 meter invoerrollenbaan (binnen) met 2 hydraulische klemmen voor de uitlijnen van het werkstuk Gkjdpfxsv Sfp Aj Abbod - Maximale werkstukbreedte: 900 mm - elke rol is gemotoriseerd - de capaciteit van één rollenbaan is 4 ton - 4 meter uitvoerrollenbaan: één rollenbaan is uitgerust met een weegschaal om het werkstuk na het snijden te wegen (Sartorius-systeem) Max height of workpiece: 860 mm Sawspeed: 16 > 80 m/min Length of band saw: 10260 x 80 x 1,60 mm Power needed: 32 kW (100 amp) Weight: 9 ton (only machine)

Condition: excellent (used), Year of construction: 2011, Panel Saw Manufacturer: Martin Gjdpfx Abewxxhqjbjkd Model: T 60 Year of manufacture: 2011 Sliding Table Length: 3,000 mm Cutting Width: 856 mm Max. Cutting Height: approx. 130 mm Power: 5.5 kW Speed: 4,000 / 4,800 / 6,000 rpm Max. Saw Blade Diameter: 250 – 400 mm Rip Fence Tiltable 45° on Both Sides Scoring Unit: No Height and Angle Adjustment: Electric Motor Brake: Yes Weight: 1,350 kg

Condition: ready for operation (used), total height: 1,600 mm, total length: 2,500 mm, total width: 2,400 mm, throat depth: 320 mm, empty load weight: 2,400 kg, nominal power: 3 kW (4.08 HP), Behringer HBP 320 Sawspeed: 16 > 100 m/min Gkedjxqr Ufspfx Abbjd Length of band saw: 4860 x 32 x 1,1 mm

Condition: ready for operation (used), total height: 2,100 mm, total length: 2,900 mm, total width: 2,500 mm, throat depth: 400 mm, empty load weight: 2,700 kg, nominal power: 5 kW (6.80 HP), Behringer HBP 400 Max height of workpiece: 400 mm Gedpfx Aboxqr Uljbokd Length of band saw: 5800 x 38 x 1,3 mm

Condition: ready for operation (used), total height: 1,400 mm, total length: 2,300 mm, total width: 2,300 mm, throat depth: 260 mm, empty load weight: 2,000 kg, nominal power: 5 kW (6.80 HP), cap round: dia 260 mm cap square: 260 x 260 mm Max height of workpiece: 260 mm Sawspeed: 17 > 120 m/min Gjdpfjxqr Ursx Abbokd Length of band saw: 4100 x 32 x 1,1 mm

Condition: ready for operation (used), total height: 1,750 mm, total length: 2,500 mm, total width: 1,850 mm, throat depth: 310 mm, empty load weight: 1,160 kg, nominal power: 1.5 kW (2.04 HP), Behringer SLB240AG automatic CNC Max height of workpiece: 260 mm Table travel : Manual (1) -- hydraulic (2): hydr Sawspeed: 16 > 120 m/min Godpfx Ajxqr Uxjbbjkd Length of band saw: 3.300 x 27 x 0,9 mm

Condition: ready for operation (used), total height: 1,915 mm, total length: 2,500 mm, total width: 1,290 mm, throat depth: 400 mm, empty load weight: 950 kg, nominal power: 6 kW (8.16 HP), Round material: Ø 400 mm Rectangular: 400 x400 mm Maximum material weight: 1000 kg/m Cutting speed: 20 to 110 m/min Saw blade dimensions: 5090 x 41 x 1.3 mm Max height of workpiece: 400 mm Godpfx Aboxpymasbskd Sawspeed: 20-110 m/min Length of band saw: 5700 x 41 x 1.3 mm

Condition: ready for operation (used), empty load weight: 1,350 kg, total length: 1,960 mm, total width: 1,170 mm, total height: 1,070 mm, additional equipment features: CNC full automatic, Full automatic circular saw Gedpfx Aboxpki Ejbekd Automatic CNC positioning of sawblade = automatic turntable, up to 180° left and right Equipped with: 1 - workpiece storage unit (green) + auto rollerconveyor, length 7 meter 2 - auto feed-in by pulling workpiece to sawblade, max single movement of 2000 mm - repositioning is possible for longer lengths 3 - auto feed-out of cut workpiece, max movement of 1000 mm 4 - unloading table with chains Automatic zero point recognition Automatic programmed controlled processing of cutting sequences Storing of programs with different sawing tasks Dia saw / abrasive - disk: max 425 mm Turningspeeds: 6 > 30m/min Power needed / motorpower: 5,5 kW

Condition: ready for operation (used), total height: 1,350 mm, total length: 2,680 mm, total width: 2,350 mm, throat depth: 500 mm, empty load weight: 1,800 kg, Volledig automatische lintzaag met bundelklem en automatische invoer CNC gestuurde hoekpositionering werkstukbreedte in bundelklem: 0-300 mm werkstukhoogte in bundelklem: 5-300 mm enkele materiaaltoevoerlengte: 0-600 mm herhaalde materiaaltoevoerlengte: 0-9999 mm maximale snijcapaciteit (90°, rond): 320 mm maximale snijcapaciteit (90°, rechthoek): 500 x 300 mm rechter versteksnede (45°, rond): 320 mm rechter versteksnede (45°, rechthoek): 310 x 310 mm rechter versteksnede (30°, rond): 200 mm Gsdpfx Abjxbui Tebjkd rechter versteksnede (30°, rechthoek): 200 x 180 mm linker versteksnede (45°, rond): 320 mm linker versteksnede (45°, rechthoek): 300 x 230 mm Max height of workpiece: 325 mm Sawspeed: 18 > 115 m/min Length of band saw: 4200 x 34 x 1.1 mm

Condition: ready for operation (used), throat depth: 1,100 mm, Heavy duty double column bandsaw Godpfjxpggasx Abbskd sawing cap: dia 1100 mm autofeed with stroke of 500 mm (with unlimited repositioning) enlarged height of sawblade: 67 mm chipconveyor equipped with fully motorized Weisshaupt rollerconveyors: - 6 meter in-feed rollerconveyor (outside) with 1 manual clamp for aligning workpiece - 3 meter in-feed rollerconveyor (inside) with 2 manual clamps for aligning workpiece - max workpiece width: 1100 mm - each roll is motorized - cap of one roll is 4 ton - 2 meter out-feed rollerconveyor - one rollerconveyor is equipped with scales to weigh workpiece after cutting (Sartorius system) Max height of workpiece: 1100 mm Length of band saw: 11400 x 67 x 1,6 mm

Condition: ready for operation (used), total height: 3,340 mm, total length: 4,500 mm, total width: 1,950 mm, throat depth: 660 mm, Type: ONL 660x700 ACN Heavy duty double column bandsaw specific for high-alloy steels CNC touch control with saw parameters for various types of high-alloy steels cap round: dia 660 mm cap square: 660 x 700 mm bundle cap: 555 x 700 mm autofeed with stroke of 500 mm (with unlimited repositioning) sawing power: 18,5 kW the in-feed and sawing speeds are frecquency controlled enlarged height of sawblade: 67 mm chipconveyor equipped with fully motorized Weisshaupt rollerconveyors: - 10,3 meter in-feed rollerconveyor (outside) with 2 hydraulic clamps for aligning workpiece - 9 meter in-feed rollerconveyor (inside) with 2 hydraulic clamps for aligning workpiece - max workpiece width: 900 mm - each roll is motorized - cap of one roll is 4 ton - 4 meter out-feed rollerconveyor: one rollerconveyor is equipped with scales to weigh workpiece after cutting (Sartorius system) Max height of workpiece: 700 mm Sawspeed: 10 > 120 m/min Length of band saw: 8660 x 67 x 1,6 mm Power needed: 27 kW (58 amp) Gkjdpfx Absxpgggjbjd Weight: 8,5 ton (only machine)