Circular sawing machines

Altendorf F45

Condition: excellent (used), Year of construction: 1998, Swiveling panel saw F45 by Altendorf with 2-axis pre-scoring device in excellent condition Sliding table length 3200mm Gedpfe Akh Abex Acmjui Virtually no cuts or major scratches on the sliding carriage Saw blade swivel from 0 to 45.5 degrees Speeds 3000, 4000, 5000 and 6000 rpm with electric speed indicator Reinforced drive motor 7.5kW with automatic motor brake Saw blade diameter up to 350mm, 400mm possible without the pre-scoring blade Cutting height max. 125mm Cutting width up to 1050mm Swivel angle and height adjustment hydraulically adjustable Rip fence up to approx. 3200mm Miter fence adjustable up to 45 degrees Width fence foldable Dust extraction port 80 + 120mm, combined into 160mm Sliding carriage lockable (BOLT), allowing large panels to be placed on it Handle Rip fence shoe 1 used plastic saw blade with 2-axis pre-scoring device 3 riving knives 2-axis pre-scoring unit, electrically adjustable in side and height 2 safety guards 2 emergency stop switches Operating manual CE marking 2 V-belts and 2 grease dispensers renewed Very well-maintained machine with minor signs of wear on the anodized sliding table. Original paint, only touched up in places. Excellent condition as can be seen in the original photos; unfortunately, there is no operating hour counter installed, but the saw has not been used much. Dimensions approx. 3400 x 3100 x 1450mm (LxWxH). Weight approx. 1200kg. The machine can be demonstrated on site by appointment. We only offer machines that are ready for demonstration and are in our warehouse; see "other offers from this supplier".

Condition: good (used), Year of construction: 1997, Also available CONQUEST T51 model The used HARDINGE CONQUEST T42L 3-axis motorized CNC lathe is a robust and precise medium-sized inclined bed numerical control lathe, turning length approximately 700mm, bar passage 42m, automatic turret with 12 positions with motorized tools, FANUC 18-T CNC with color LCD and RS232 serial interface for data transfer Gsdevtrc Sspfx Acmjui 5″ ASA spindle maximum revolutions: 4,200 rpm continuous C-axis 20HP spindle power X-axis travel: 172mm Z-axis travel: 575mm machine weight 4,000 Kg. Complete with 210mm AUTOBLOCK hydraulic chuck, tool presetting, programmable tailstock, 2 motorized tool holders (1 axial and 1 radial), chip evacuator, set of fixed and manual tool holders and backup disk; Year of construction 1997; machine compliant with “CE” standards, in excellent condition.

Condition: used, Year of construction: 1996, Slide length: 3200 mm Cutting width at rip fence: 1300 mm Cutting width at crosscut fence: 3200 mm Cutting depth: 145 mm Scorer: yes Gedpfx Ao Ai Em Eecmeui Saw blade height adjustment: electric Saw blade tilt adjustment: electric Rip fence adjustment: electric Crosscut fence adjustment: manual Saw blade angle display: digital readout Cutting height display: - Rip fence display: digital readout Crosscut scale display: scale Saw blade diameter: 450 mm Speeds: 4 Motor power: 5.5 kW Extraction port: 80 and 120 mm Machine length: 4000 mm Machine width: 2200 mm Weight: 1200 kg

Condition: used, Year of construction: 2008, Slider length: 3000 mm Cutting width at the rip fence: 1350 mm Cutting width at the crosscut fence: 3200 mm Gusdpfo Ai Em Nex Acmei Cutting depth: 170 mm Scoring saw: no Saw blade height adjustment: electric Saw blade swivel adjustment: electric Rip fence adjustment: manual Crosscut fence adjustment: manual Saw blade angle display: digital display Cutting height display: digital display Rip fence display: digital display Crosscut fence display: scale Saw blade diameter: 500 mm Speeds: 4 Motor power: 5.5 kW Dust extraction port: 80 and 120 mm Machine length: 3600 mm Machine width: 2200 mm Weight: 1200 kg

Condition: new, 50 linear meters of Jungheinrich MPB pallet racking, new New item, see pictures Height: 9 m Depth: 110 cm, blue Beam length: 2.7 m, yellow Beam capacity per level/bay: 3000 kg Negotiable price: €12,750 net, ex warehouse Offer includes: + 19 units of pre-assembled frames, depth 110 cm, height 9 m + 144 units of beams, length 2.7 m, 3000 kg capacity per level/bay + 288 units of safety locking devices + 78 units of concrete anchors Load capacity signs, documents, etc. are included. Additional accessories can be found in the accessories catalog. Frames are blue, infill panels are galvanized. Heights from 3.5 m to 9 m in stock. Bay load capacity: 12 tons. Beams are yellow. Item is in stock. Transport and assembly are available upon request. Gsdpolp Ntgjfx Acmeui Inspection possible at any time by appointment. Further information upon request. We constantly have over 5000 linear meters of pallet racking from numerous manufacturers in stock. (Subject to changes and errors in technical data, specifications, and prices, as well as prior sale! See our terms and conditions; all prices are excluding VAT, ex warehouse) Lenox Trading – Top warehouse technology & used & new heavy-duty racking Description text: Are you looking for high-quality warehouse racking to buy? With around 100 employees, Lenox Trading is one of the largest dealers of new and used warehouse technology in the entire DACH region (Austria, Germany, Switzerland). ⚡ IMMEDIATELY AVAILABLE: • Over 10,000 linear meters of racking immediately available • 20,000 m² of mezzanine floors & steel platform structures immediately available • 30–50 semi-trailer truckloads of goods delivered weekly for maximum selection 📦 OUR RANGE (BUY CHEAP ONLINE): Whether pallet racking, heavy-duty racking, high-bay racking, shelving, tire racking or racking for IBC containers – we deliver and assemble throughout Europe with our OWN team! Including CAD planning, transport, dismantling and assembly. 🏭 TOP BRANDS USED & FROM INSOLVENCY / BANKRUPTCY SALES: • SSI Schäfer (Schäfer warehouse technology, R 3000, PR 600, PR 300) • Jungheinrich (Type MPB, Type E, Jungheinrich heavy-duty racking) • Wezsuisse Euronorm, Bito RK 4209, Schäfer EK 113, Schäfer RK 521, Schäfer LF 533, Familog SP 6428, R-KLT 4315, RL-KLT 6147, Schäfer KLT 3214, UTZ SILAFIX 3Z, EF 3120, EF 6420 • Cantilever racking (Elvedi cantilever racking, Schäfer, Ohra) • Stow, Meta, Bito, Galler, Nedcon, Voest (Vöst), SLP, Palflex, Ramada, Bauer, Ohrner 🔨 OUR SECOND AREA OF BUSINESS: ONLINE AUCTIONS & UTILIZATION For dismantling and clearance orders, we offer a complete, worry-free package: 1. Lump-sum purchase: Purchase of merchandise, equipment & complete warehouse stocks including complete clearance. 2. Commission-based auction: Conducting auctions on behalf of customers. Our full service provided by our own employees: Cataloging, office preparation, inspection, goods delivery, logistics, dismantling and complete clearance. Whether you came across us through heavy-duty racking or are looking for galvanized heavy-duty racking / heavy-duty racking systems – we guarantee the best conditions. Contact us for a non-binding offer!

Condition: used, Year of construction: 2011, Sliding carriage: 3000 mm Gsds Aitc Sepfx Acmoui Cutting width: 1300 mm CNC stop Motor: 5.5 kW Saw blade diameter: max. 500 mm 2-axis scoring unit LED lighting Scoring unit control panel at eye level, swiveling Front table, swiveling Template holder Table extension 840 mm Angle/miter stop Location: Supplier

Condition: used, Year of construction: 1991, Altendorf F45 panel saw with a reinforced motor and spray system Used Altendorf F45 panel saw with a reinforced motor for sawing non-ferrous metals and a spray system. Manufacturer: Wilhelm Altendorf Model: F45 Machine type: Panel saw Godpfs Aibipox Acmeui Year of manufacture: 1991 Cutting length: 3,000 mm Motor: Reinforced saw motor for processing non-ferrous metals Sliding table: Aluminum format sliding table Parallel stop: Available Cross stop: Available Spray system: For lubrication and cooling during sawing Spray system operation: Via amber switch Operation: Manual Condition: Used

Year of construction: 2026, condition: new, SoloBaker's superb NEW BCS 201 vertical cake and pie slicer. Universal automatic knife slicer with a rotary table designed for slicing all kinds of cakes and pies. The solid construction, precise drive system, automatic cleaning, blades heating and adjustable cutting head speed give almost unlimited possibilities to adapt the device to the selected product. In combination with the affordable price and small dimensions, the slicer is a good and economical solution for small and large patisserie enterprises. Godpshabdpefx Acmeui Dimensions 130 x 110 x H 148cm. Power consumption 1,2 kw. Voltage: Single phase 230V 50Hz with voltage stabilizer. Required air connection 0.6-0.8 MPa and a flow rate of 200-300 l/min (depending on the cutting speed). Vertical automatic cake and pie slicer (cutting machine) with a rotary table designed for fast slicing of all types of cakes and pies without compromising their attractive appearance and structure into square and triangular portions. With the help of a PLC, the touchscreen allows easy setting of the parameters of the cut part (s) and the built-in microprocessor allows to store up to 20 cutting programs in memory. The cover of the machine is made of stainless steel. The 9L air tank is built into the machine at the front part. The double blades of the knives are made of food grade stainless steel and have a precise drive system and an automatic system for cleaning and heating the blades and an adjustable cutting speed allow the machine to cut various cakes and pies to an effective height 80 mm. Most important functions: - The double blade knife, vibrating in the opposite direction, makes cutting cakes smooth and clean. - Anti-slip rotary table (40x60cm) with a rectangular tray can be easily replaced by 2 round trays (diameter each 30 cm). - Slicing 2 round cakes at the same time. - Locking wheels make it easier to transport the machine to the desired location. - Induction system for heating the knife up to a temperature of 100°C ensures an even cut of hard glaze, chocolate and other similar surfaces. - High degree of accuracy of cutting parameters is achieved by means of two servomotors, which ensure precise operation of knives and table rotation. - Cake pieces are obtained with the same weight, shape and volume, which eliminates the need for additional control. - The speed of lowering and lifting the knife is set according to the characteristics of a particular product - this will allow you to achieve maximum productivity. - Electronic air pressure control ensures smooth and accurate machine operation. - High quality automatic knife cleaning system maintains the perfect appearance of the cut product and eliminates the need to wipe it by hand before each cutting. The cleaning system includes mechanical removal of product residues by a return slider (bar) and a stream of air into a special collection tank. - Residue collection containers eliminate the need for frequent cleaning of the machine and the surrounding work area.. - The machine makes up to 40 cuts per minute. - PLC & touchscreen Siemens. - Built-in voltage stabilizer for stable operation of the electronics and servomotors. CUTTING RANGE: Round cake/pie with a diameter of 15-30 cm - cut into triangles into 2/4/6/8/10/12/14 equal parts. Rectangular cake/pie up to 60 cm x 40 cm - cut into rectangular or triangular shapes. 1 Year Warranty

Condition: used, Year of construction: 1993, machine/vehicle number: 93-11-247, functionality: fully functional, input voltage: 400 V, type of input current: three-phase, tilt adjustment saw blade: 45 °, rotational speed (max.): 4,000 rpm, Fully functional machine from a model-making business. In good condition. Machine is available from week 51/2026. Gusdpfxe Akdltj Acmoi

Condition: used, Year of construction: 1985, power: 5.5 kW (7.48 HP), Table saw, panel saw, Altendorf F45 Year of manufacture: 1985 From an insolvency liquidation, therefore no further technical data available. Please submit a bid. Location: Freising Gusds Akb Dbspfx Acmei Inspection possible. Sale to the highest bidder. We have other used machines available. Please contact us.

Condition: new, distance between shaft and table: 470total power requirements: 2,2 kwweight approx.: 1,2messurements (LxWxH): Länge2400 mm Breite/Tiefe2160 mm Höhe2300 mm Gewicht 1200 kgspindle rotation speed: 60 4200 min¯¹ Gusdpjd H Hhzefx Acmji

Condition: repair required (used), Year of construction: 1993, Equipment: saw blade guard, scorer, For sale is a robust Altendorf F-45 panel saw from our carpentry workshop. Thanks to the long sliding table and the scoring unit, the machine offers an excellent basis for refurbishment or as a source of spare parts. Technical data & equipment: Machine no.: 93-1-53 (year of manufacture 1993) Sliding table length: 320 cm (double-roller carriage) Additional unit: Scoring unit available (was rarely used by us) Convenience: Automatic height and depth adjustment of the saw blade works well. Accessories: Stops and extraction system, see separate photos. Known defects (sold expressly as defective): The main motor no longer provides sufficient power (probably winding damage or bearing defect). The automatic tilting of the saw blade occasionally jams at approximately 25° tilt (needs to be cleaned or mechanically inspected). The machine was well-used and is being offered expressly as a repair-required DIY project / for export / for spare parts recovery due to the described defects. Gedpfx Ace Ai S A Rsmeui Collection & loading: Self-collection only in 41334 Nettetal. Loading assistance available: A forklift is on site, and we can load the machine onto your truck or suitable trailer free of charge during collection. The sale is made with the exclusion of any warranty, guarantee and liability for defects. No returns.

Condition: excellent (used), Year of construction: 1997, functionality: fully functional, Blade carriage length: 3800 mm Cutting width: approx. 1,300 mm Saw blade diameter: 350 mm Saw blade tilt: up to 45° Cutting speed: 3,000 - 4,000 - 5,000 and 6,000 rpm Gusdpfx Ae Ah R Ihscmsi Blade motor power: 5.5 kW

Condition: excellent (used), functionality: fully functional, Buffer belt, stainless steel dryer Guedpfxswb Sqwo Acmei 3-piece buffer belt Belt width: 1500 mm Stainless steel Length: approx. 17.5 meters Width: 2500 mm Height: 3050 mm Weight according to specification: approx. 8000 KG Elements under the belt are not included

Condition: excellent (used), CATALOGUE NUMBER 8006 TECHNICAL DATA - max diameter of the main saw blade with scoring saw: 350mm - max diameter of the main saw blade without scoring saw: 450mm - cutting height with a 350mm blade installed: 100mm - electric adjustment of the main saw blade (up/down) + angle - electric angle display - electric adjustment of the scoring saw (up/down, left/right) - spindle diameter: 30mm - spindle locking - with a rip fence carriage - cutting length on the carriage: 3400mm - cutting width with fence: 1300mm - with a side carriage - with a scoring saw - max diameter of the scoring saw: 120mm - spindle diameter: 22mm - scoring saw motor: 0.75kW - main motor: 5.5kW - 4 types of rotation speeds - electronic speed display - diameter of the dust extraction port: 120mm, 80mm - table dimensions: 1220x730mm Gjdpfx As Af I D Ascmeui - table dimension with extension: 1440mm - table dimension with extension: 2060mm - blade guard - dimensions (L/W/H): 3550x3400x1500mm - weight: 1140kg ADVANTAGES - electric adjustment of the saw blade and scoring saw - with original fence - carriage length: 3400mm - German-made - unpainted - used saw, very good condition Net price: 38900 PLN Net price: 9047 EUR, depending on the exchange rate of 4.30 EUR (Prices may vary due to fluctuations in the exchange rate)