Used Sand for sale (2,133)

Condition: new, Year of construction: 2024, Working width: 950 mm Workpiece height min: 4 mm Workpiece height max: 170 mm Height adjustment: electronic Workpiece thickness display: digital Control system: Fox 500 KTR Units: 1 1st unit: Combination unit for calibration and sanding / Helically grooved steel roller Ø 120 mm with fine height adjustment / Hard sanding pad with graphite lining Deburring brush: no Dedsknyhlopfx Aqvjkn Motor power: 7.5 kW Extraction port: 140 mm Machine length: 1388 mm Machine width: 1545 mm Machine height: 1668 mm Weight: 660 kg

Condition: new, Year of construction: 2023, Working width: 1100 mm Minimum workpiece height: 4 mm Maximum workpiece height: 170 mm Height adjustment: electronic Workpiece thickness display: digital Number of units: 2 1st unit: Helically grooved steel roller Ø 120 mm, fine adjustment for calibration, pneumatic on/off for the roller 2nd unit: Combination unit with finely adjustable working height for calibration and fine sanding: rubber-coated roller Ø 120 mm (45 Sh), hard sanding shoe with graphite coating on an interchangeable insert and pneumatic on/off of the roller Dedpjirmg Uofx Aqvekn Segmented sanding shoe: elastic, sector spacing 56 Control system: FOX 500 KTR Dust removal brush: no Motor power: 15 kW Extraction connection: 2 x 140 mm Machine length: 1650 mm Machine width: 1820 mm Machine height: 1960 mm Weight: 1170 kg

Condition: new, Number of sanding units 8 st. sanding width 180 (260) mm Sanding height max. 160 mm Dimensions (L/W/H) 3065x1600x1900 mm weight of the machine ca. 1500 kg LÖWER Leistomat SD ----- Automatic fine grinding machine for wood grinding (smoothing, defibering and Edge breaking) or intermediate sanding of profiled window bars. With soft disc Technology for the visible surfaces as well as automatically safe profile and Width adjustment. - 2 lamella roller units on the side, each 0.75kW, L=120mm, D=200mm 1 softisc unit Ø=200mm above 0.75kW, 1 slat roller unit L=200mm top 0.75kW, 1 soft disc unit Ø=200mm bottom 0.75kW, 1 slat roller unit L=200mm bottom 0.75kW, 2 lamella roller units on the side, each 0.75kW, L=120mm, D=200mm - Linear guidance of all grinding units Linear ball bearing sets on hardened shafts - time-controlled immersion of all lamella roller units directly above the incoming workpiece edges. By the It is possible to immerse the aggregates deeper into the profiles to be able to deliver. - Motorized workpiece thickness adjustment of the machine - variable grinding flap speed via frequency converter for adjusting the grinding intensity using frequency converters (separate for discs, surface rollers and side rollers) - Disc aggregates as soft discs with Velcro fastener for Grinding wheels (wood pulp) - Feed via three lower and one upper conveyor belts and Spring-loaded pressure rollers with infinitely variable speed 4-15m/min - Parameters that can be set using the touch panel are workpiece thickness, Workpiece width (left side units individually), immersion depth Side units, spindle speed, feed speed - Saving the parameters as machine programs in program mode - Working in automatic mode with non-contact Workpiece width detection and profile detection as well as automatic Adjustment of the sanding units to the workpiece width and the Profile shape (workpiece height is set in advance) - pneumatically clocked driven feed roller, automatic Clamping of the workpiece and feeding in after unit adjustment - Red/green indicator lights to indicate operational readiness - shortest workpiece length 380mm - Transport belt width 200mm - max. workpiece width 180mm (260mm in the envelope process) - Workpiece height 12-160mm - Suction connection 4 x 100mm and 2x80mm diameter - Sensor-controlled tool blow-off directly on the discs - Length (case) x width x height (mm): 3065x 1600 x 1900 Complete length: 4365mm (including roller conveyor with integrated workpiece width detection) - Weight: 1500kg - Operating voltage 400V, 50Hz, 3P, air connection 6 bar - CE version ----- Price of the above machine on request! ----- Special accessories with additional costs: Set of replacement slats for Leistomat SD-200 consisting of Area aggregates: 30 strips EH45 / 200 - 7 (rolls) 30 strips EH45 / 200 - 20 (rolls) Folding units: 96 strips M55 / 120 - 4 SmartFlex slat disc Ø200 solid with 30 grooves 50mm long Dsdpfx Aqjvnv Uhjvekn Set of replacement slats for SmartFlex slat disc consisting of 60 strip M35 / 50 K 180-7 p Sandpaper disc VB for soft disc D=200mm grit 220 with velor backing (Velcro), pack of 100. Sandpaper disc VB for soft disc D=200mm grit 280 with velor backing (Velcro), pack of 100. ----- Price of the above-mentioned special accessories on request! -----...

Year of construction: 1996, condition: used, machine/vehicle number: A9611003/0100, Technical data: - Manufacturer: Venjakob - Type: VBS 1300 - Working width: 1.300mm - Year of construction: 1996 - Operating side: left - Electric height adjustment of the sanding rollers - Constant table height, working height 920+-20mm - Manufacturer of brush sanding heads: Flex Trimm - Number of brush sanding heads: 2 pieces - Diameter of the sanding heads: 280/390mm - Sanding centre length 55mm - Roller1, grit 240, roller2, grit 280 - Speed of the brush sanding heads: 100-1000 rpm - Angled brushes - With brush oscillation - With vacuum belt - Feed speed: 1.5 - 7.5m/min. - Motor power 4KW - Machinelength: 3.500mm - Very sturdily built machine - Colour: light grey RAL 7035 - Total connected load 16KW - weight: 2740 kg Dksdsyyyhuspfx Aqvon

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, WOLFF - Sand separation and washing plant Dsdpjy N Rtysfx Aqvekn

Condition: excellent (used), functionality: fully functional, power: 110 kW (149.56 HP), Year of construction: 1999, Infeed opening: 720 x 200 mm Rotor diameter x width: 1,000 x 700 mm Max. feed size: up to 70 mm incl. discharge chute incl. hydraulic unit incl. approx. 2.5 t of spare and wear parts Dkodsyxp Uuopfx Aqvsn Optional: suitable steel construction available

Condition: used, Year of construction: 1983, Used machine Year of manufacture: 1983 Features and technical data: Dedpfx Aqey Dkhgsvokn with 2 combination units with 2 contact rollers, 1 x 65° shore, 1 x 85° shore and 2 air sanding shoes Sanding width: 1350 mm Abrasive belt dimensions: 1360 x 1900 mm Maximum workpiece thickness: 150 mm 1st unit with 15 kW 2nd unit with 15 kW Cleaning brush Roller table at infeed Roller table at outfeed Infinitely variable feed speed: 2.5 to 12.5 m/min Weight approx. 3700 kg Availability: approx. May/June Location: Thuringia

Condition: ready for operation (used), * Brand: Kleemann * Model: for sand * Type: 825 Djdpfx Aoywmnioqvskn * Feed opening: 790 x 140 mm * Incl.: 160 kW E-motor.

Year of construction: 1995, condition: excellent (used), Höfer edge sanding machine sanding belt dimension 3000 x 200 mm Oscillating sanding belt Veneer sanding device Mobile Dksdpjlnalfofx Aqvon CE conform

Condition: used, machine/vehicle number: 008291, Position 1: Bottom Sanders VIET-S3 - VALERIA Dedpjx A Tayofx Aqvjkn Position 2: Top Sanders VIET-S3 - VALERIA

Condition: used, machine/vehicle number: 008401, Position 1: Bottom Sanders DMC-UNISAND K-I Djdpfx Aqjywafnevokn Position 2: Top Sanders DMC-UNISAND K-I

Condition: new, Year of construction: 2026, Autonomous spreader of sand-salt mixture RPS-1500 from ТМ TlSAV - is a powerful equipment for high-quality spreading of roads and pavements with de-icing materials, which allows to minimize the use of manual labour and reduce the accident and risk of injury to people. The spreader is equipped with a 1.5 m³ hopper with a scraper-chain feeding mechanism and a disc for spreading materials. Thanks to its autonomy and compact dimensions it can be used with any vehicle. Djdpfxovpp S Ne Aqvekn CHARACTERISTICS -Spreading width, depending on disc speed - 3-6 m. - Hydraulic drive mechanisms. -Adjustment of the disc inclination (manual). -Mix feeding mechanism - scraper-chain. -System of proportional control of disc rotation speed on the control unit in the driver's cab - (optional). - Control of the equipment by remote control from the driver's cab. - It has its own wheelbase or can be mounted on the customer's vehicle. TICAB is a manufacturer of road machines: bitumen emulsion sprayers, joint and crack fillers, asphalt recyclers, street hoovers, universal loaders and other road machinery. High European quality, competitive prices. If we do not have an official representative office in your country, we are looking for a distributor! We will be glad to contact you! Sand spreader with capacity of 6 cubic metres (9 tonnes of mixture) for treatment of carriageway with anti-icing materials (sand, salt, sand-salt mixture) in winter period and transportation of asphalt concrete mixture in summer period. Sand spreaders are installed in the lorry body with the help of a crane. -Dimensions: L-4.5 m; W-2.10 m; H-1.85 m - Travelling speed - up to 30 km/h. - Strip treatment width up to 10 m, spreading density - up to 350 g /m. - Adjustment of width and density of spreading - on the body of the spreader. -Feed distributor is disc-shaped (stainless steel), equipped with a protective cover, height adjustable, equipped with a hydraulic motor. - Power take-off of the hydraulic system - from the standard power take-off box of the vehicle. -Scraper-chain sand (salt) feeding is equipped with a hydraulic motor, with protection against ingress of small foreign objects. - Adjustment of scattering ‘right-left-proportional’. - Control (ON/OFF) from the driver's cab.

Condition: new, functionality: fully functional, Year of construction: 2026, RPS-6000/9000 SALT & SAND SPREADER TICAB (Trade Industrial Company AB) — a leading manufacturer of road maintenance equipment in Europe — offers you a cost-effective solution for efficient local repair and maintenance of asphalt concrete surfaces. Salt and Sand Spreader RPS-6000/9000 TM TICAB is a perfect solution for de-icing the streets and highways. New Salt and Sand Spreaders RPS-6000/9000 with 6 m3/9m3 capacity are made for spreading de-icing agents. Allowable outside temperature is to -40°С. The spreader should be mounted on a truck using a crane. The salt spreader RPS-6000/9000 is a prospective investment. Fits any truck. Technical Specifications Dkedpfxot N Ty To Aqvjn ● Recommended velocity up to 30 km / h. ● The spreading density is 350 g/m2. ● The spreading width is up to 4-8 m. ● Width and density regulation from the Spreader body. ● Disc spreader stainless steel. Position regulating. ● Autonomous (diesel engine). ● Feed mechanism - conveyor chain. ● Adjusting the spreading angle. ● Protective awning. ● «ON» / «OFF» from the driver’s cab. ● In-cab adjustment of width and density of spreading. Service Terms ● In stock ● Warranty: 12 months ● Delivery: from the manufacturer’s warehouse ● Support: manual, technical assistance, video instructions

Condition: good (used), Year of construction: 1986, functionality: fully functional, machine/vehicle number: 4/3509, power: 2.2 kW (2.99 HP), Model: LZK 3/4. Machine No.: 4/3509. Belt dimensions: 150 x 2600 mm. Feed unit: Masterwood type MEC 8V. Main motor: 2.2 kW. Oscillation motor: 0.18 kW. Dkedpfjy Nz H Djx Aqvon

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, machine/vehicle number: VO995, total length: 1,700 mm, total width: 1,000 mm, total height: 1,150 mm, table length: 880 mm, table width: 370 mm, overall weight: 260 kg, power: 2.2 kW (2.99 HP), grinding width: 150 mm, grinding length: 2,580 mm, Machine type: LVO 120, Machine number: VO995, Year of manufacture: 2009, Main motor: 2.2 kW, Oscillating motor: 0.11 kW Dkedpfey Nznujx Aqvsn

Condition: as good as new (ex-display), A demonstration belt grinder WIEGAND with two belt speeds ideal for steel and stainless steel belt dimensions: 2000 x 150 mm Djdpfjpgmufsx Aqvjkn belt speed: 18/ 37 m/sec power: 2,2/ 3,8 kW 400V/50Hz weight: 110 kg Tech. Data and dimensions: Errors excepted

Condition: as good as new (ex-display), A demonstration belt grinder WIEGAND Belt dimensions: 2000 x 75 mm belt speed: 18/ 37 m/sec power: 2,2/ 2,8 kW 400V/50Hz Dkjdpjpgmtzjfx Aqvon weight: 90 kg Tech. Data and dimensions: Errors excepted Further tech. Data see pdf. Document

Condition: good (used), Year of construction: 1996, double-sided top and bottom sanding with sanding shoe and dust brush Dkodpfx Aexfl Eaeqven max. sanding width 300 mm max. sanding height 200 mm year of manufacture 1994 with CE mark

Condition: new, Wide belt sanding machine for calibrating and fine sanding Working width mm 1,100 Min/ Max. working height mm 4/ 170 Sanding belt width mm 1,115 Sanding belt length mm 2,150 Gear motor kW 2.2 Feed speed m/min variable Infeed and outfeed support rollers for long and short workpieces Oscillating belt cleaning 1st unit Oscillating belt cleaning 2nd unit Oscillating belt cleaning 3rd aggregate 10” touch screen control panel “eye-S” 1. Aggregate steel roller 2. Aggregate rubberized calibrating roller 85SH 3. Aggregate combi-aggregate pneumatic seg. sanding pad /rubberized sanding roller 35 SH Motore power 1st unit kW 18.5 Motor powert 2nd & 3rd aggregate kW 18.5 Version "B" for RRCS with: Dodpfxjitvkue Aqvskn Pneumatic switching on and off 1st aggregate Pneumatic switching on and off 2nd aggregate Pneumatic switching on and off 3rd aggregate "MESAR" with elastic segmented sanding pad Pneumatic switching on and off of the sanding pad unit electronic adjustment of the working height SPECIAL PRICE! IMMEDIATELY AVAILABLE

Condition: new, DMC SD 90 RCS 135 "C-Plus" version Dodpfsd E Ixzox Aqvekn Technical specifications: Useful working width mm 1350 min/max Working height (with fixed table) mm 4 – 200 Abrasive belts mm 1,370 x 2,620 Feed speed m/min 3.5-18 working aggregates: “MESAR 46” 46 sectors (30 mm) flexible electronic link sanding pad complete with B/46 workpiece sensing bar in the infeed • 1st position: "RA" diagonally ribbed steel contact roller D=250 • 2nd position: COMBI with rubber-coated grinding roller D=175 mm 65 Sh • Floating pressure shoe in 1st position with pneumatic adjustment • 2 grooved rubber coated pressure rollers 2nd and 3rd position • Oscillating blow-off device 1st and 2nd unit • Workpiece cleaning unit with rotating blast nozzles • Motor 1st unit 18.5 kW • Motor 2 with inverter 15 kW Table: • Fixed table working height 900 mm • Infeed roller table for long workpieces • Outfeed roller table for long workpieces • Perforated table and transport carpet 50 Sh • Vacuum table with 4 kW electric fan integrated in the machine frame • Stepless carpet feed from 3.5-18 m/min (gear motor 0.75 kW) Control: • Electronic programming unit "Pro-Sand" • Touch screen 10.4" screen • Door with viewing window on set-up side for machine with 2 working units • LED interior lighting Advise used machines: • Technical data without obligation, mistake and intermediate sale reserve. • Price is considered ex-location price • All articles or machines are bought as seen without any entitlement on warranty. • It is left to the choice of the buyer to view the machines before at its location. • Special arrangements are possible but only valid in written form. (We answer your inquiries only with stated address + telephone number!)

Condition: new, Technical data: Working width mm: 1,350 Min./max. working height mm: 4 - 170 Sanding belt width/length mm: 1,370/2,620 Main motor power kW: 18.5 with inverter Feed speed variable m/min: 3.5 - 18 Working units: 1st unit: "RA" skew-grooved contact roller, Sh 86, diameter 160 mm 2nd unit: Combination: Rubber-coated sanding roller diameter 160 mm, 45 Sh Elastic electronic segmented sanding pad “MESAR” with 24 segments Version C: Dodpfehtuvrox Aqvokn - Elastic electronic segmented sanding pad “MESAR” complete with: - Pneumatic cylinder (on/off) for automatic engagement/disengagement of the sanding roller sanding pad unit - Activation of segments via electronic control, which synchronizes their operation with feed speed and manages the number of active segments based on the workpiece geometry, allowing selection of more or fewer segments to the left or right of the workpiece. Versions 135: “MESAR 24” with 24 segments, segment width 55 mm, complete with B/24 workpiece scanning bar at infeed Additional equipment: Roller table at infeed and outfeed for long workpieces Perforated table and conveyor belt Vacuum table with 4 kW (5.5 HP) electric fan integrated into machine frame Oscillating blow-off device, 2nd unit Touch screen 10.4” display with ‘eye S’ software integration NOTE: IMAGES ARE SAMPLE PHOTOS OF A SIMILAR SD70!

Condition: excellent (used), Heavy-duty double-sided edge sanding machine, oscillating Motor power approx. 3.0 kW Oscillation with own motor approx. 0.2 kW Sanding belt dimensions 3000 mm x 200 mm Front sanding table 980 x 340 mm rear sanding table 750 x 300 Space requirement L x W x H approx. = 1800 x 1500 x 1000 mm Weight approx. 600 kg Front sanding table with veneer edge sanding device Rear sanding table with infinitely variable angle adjustment Angle stop on rear work table Oscillation by means of gear motor Pneumatically height-adjustable sanding beam Interchangeable radius sanding discs Pneumatic belt tension, adjustable Extraction with blower Attachment option for feed unit 2 lateral support tables for radius sanding Note on used machines: Djdpfxouxqzuo Aqvokn - Subject to errors in technical specifications and prior sale. - Prices quoted are ex location - free loading! - The machines have been cleaned and functionally tested. - All machines are purchased as seen without any warranty. The buyer is free to inspect the machines on site. - Special agreements are only possible in written form. (Inquiries will only be answered with your address and telephone number).

Condition: excellent (used), Year of construction: 1992, Belt dimensions: 2600 x 150 mm Sanding belt motor power: 2.2 kW Operating voltage: 3 x 400 V + PE / 50 Hz Sanding table height-adjustable via handwheel Table size: 975 x 340 mm Height-adjustable sanding table for radii; size: 400 x 200 mm Sanding beam can be swiveled 90 ° - 0 ° Suction connection Ø 120 mm CE Space requirement (L x W): approx. 1600 x 725 mm Weight: approx. 320 kg Dkjdstt Da Dspfx Aqvjn Note for used machines: - Subject to errors in technical specifications and prior sale. - Prices quoted are ex location - free loading! - The machines have been cleaned and functionally tested. - All machines are purchased as seen without any warranty. The buyer is free to inspect the machines on site. - Special agreements are only possible in written form. (Inquiries will only be answered with your address and telephone number).

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, Working height: 900 mm Working width: 1,350 mm Belt changing side: left Workpiece thickness: 3 - 160 mm Frequency-controlled feed speed: 4 - 20 m/min Abrasive belt dimensions: 2,620 x 1,350–1,380 mm Adjustable sanding belt blowing device with 5 settings WRD WORKPIECE CLEANING ROTOR Workpiece cleaning system with 16 rotating nozzles MOBILE OPERATING TERMINAL powerControl with powerTouch SST SOFT STARTER Inrush currents are limited to prevent voltage drops GWRD BELT CLEANING PROGRAM Upon activation, the machine automatically sets to a 10 mm workpiece thickness and activates the blowing rotors. After the feed belt is fully cleaned, the machine returns to its initial setting. AAT EXTRACTION DAMPER CONTROL Control of extraction dampers via the terminal (24 Volt DC, without extraction dampers included) UPS EMERGENCY POWER SUPPLY FOR BELT CONTROL 1-3 PCS Uninterruptible power supply for sanding belt oscillation in case of power failure System consists of: SANDTEQ W-700, PROFI SWB735/RRE – sanding from below Wide belt sanding machine with three sanding units for processing wood or wood-like workpiece surfaces Prepared to accept up to two auxiliary units, such as a cleaning brush, satinizing or structuring brush, and rotating cleaning nozzles. Units: Dodpfx Asyw Ndmsqvjkn I. R UNIT Sanding unit with automatically adjusting contact roller Profiled steel roller, 240 mm diameter With grain compensation Drive motor: 37 kW Abrasive belt speed: 25 m/s - Automatic locking of the sanding unit for fast belt changes and increased process safety - Abrasive belt drives with electronic, wear-free brake - Optical, touchless abrasive belt tracking - Pneumatic abrasive belt tensioning with integrated belt edge compensation II. R UNIT Sanding unit with automatically adjusting contact roller Rubber-coated roller, 240 mm diameter Rubber hardness: 85° Shore With grain compensation Drive motor: 30 kW Abrasive belt speed: 18 m/s III. E UNIT Sanding unit for installing a pressure beam - Automatic locking of the sanding unit for fast belt changes and increased process safety - Abrasive belt drives with electronic, wear-free brake - Optical, touchless abrasive belt tracking - Pneumatic abrasive belt tensioning with integrated belt edge compensation - Protected storage area on the machine for additional sanding inserts Drive motor: 22 kW Abrasive belt speed: 2 – 18 m/s Torque-dependent standby operation to reduce energy consumption. ACP PNEUMATICALLY SUPPORTED PRESSURE BEAM - Adjustable sanding pressure via pressure regulator - Workpiece-controlled engagement and disengagement at the leading and trailing edges - Various sanding inserts, 80 mm wide, with different felt hardnesses Machine dimensions (L x W x H): 3,900 x 2,100 x 2,000 mm Machine weight: approx. 7,500 kg SANDTEQ B-700, PROFI SWT735/RRE – sanding from above Wide belt sander with three sanding units for machining wood or wood-based workpiece surfaces Units as above, additionally: FBM FINISHING BRUSH Brush unit with finishing brush Bristles: horsehair Diameter: 130 mm Drive motor: 0.75 kW Machine dimensions (L x W x H): 2,995 x 2,100 x 2,255 – 2,415 mm Machine weight: approx. 6,500 kg

Condition: used, used, top condition Machine cleaned and lubricated Partially overhauled. Dsdpfxey H N Tmo Aqvjkn Emergency stop button renewed. All sliding pads replaced Motor cover repaired. Oscillation overhauled and adjusted. Test run conducted Manufacturer: SCM Samco Model: Unilev 15 Machine No.: 98510909050 Motor: 2.2 / 3 kW Oscillation: pneumatic, infinitely variable Veneer edge sanding unit Front table approx. 1400 x 220 mm Rear table approx. 1440 x 220 mm Tilting table double-sided Belt tension pneumatic Belt length 2170 mm Belt width 150 mm 2 belt speeds: 10 / 20 m/sec mobile Round edge sanding device with support table approx. 500 x 400 mm Extraction connection D 120 mm Required space approx. 1500 x 750 x 1400 mm Weight approx. 490 kg Storage location: 97447 Gerolzhofen, free loaded, unpacked Delivery in as-inspected condition, without warranty or guarantee