Band Saw

SANDERS BMBS 220 H-G

Condition: new, Band saw machine Make: METALLKRAFT Model: BMBS 300 x 320 HA-DG Art.no.: 3690041 Condition: New machine cutting range (round): 300 mm belt speed: 20-100 m/min, infinitely variable standard equipped with: - Fully hydraulic, semi-automatic version. after starting, the machine clamps automatically after the end of the cut, it returns to the starting position stops the saw band and opens the vice. - Cutting probe for automatic detection of material height - Horizontal vice, mechanical, hydraulic Djdeilg Hdspfx Aqvokn - Monitoring of saw band tension, electromechanical - Chip clearing brush - Measuring stop with scale 1.000 mm - coolant device - Operating instructions

Condition: new, capacity 90 degrees: round 240 mm Dedpfx Aqohpktvsvokn capacity 90 degrees: square 240 mm 165 x 310 mm saw band length 2725 x 27 x 0,9 mm mm table height 890 mm band speed 35 / 70 m/min total power requirement 1,1 kW weight of the machine ca. 0,35 t Dimensions (LxWxH) 1,7 x 0,75 x 1,8 m The Z252/DG has the following equipment: - hydraulic cylinder, - emulsion pump, - eccentric clamp, - base, - saw blade, - 400V plug -16A- The machine is delivered fully assembled and ready for immediate use.

Condition: new, Year of construction: 2026, For sawing e.g. stainless steel, tool steel, hollow sections and solid materials Two-pole drive motor enables saw band speeds of 30 and 65 m/min Monitoring of saw blade tension electromechanically via microswitch When the saw arm is raised, the lowering cylinder locks in the upper position via the solenoid valve - additional locking at the cylinder is therefore not required Saw arm inclined by 25°, thus longer service life of the saw band Precise and robust band guides with adjustable HM plates After completion of the cutting process the saw band stops automatically in the lower end position Lowering of the saw arm by gravity or manually With infinitely adjustable, constant saw arm lowering speed via hydraulic cylinder Dimensions and weights length approx. 1200 mm width/depth approx. 650 mm height approx. 1800 mm Weight approx. 270 kg Electrical data Supply voltage 400 V Mains frequency 50 Hz Machine data Saw band speed(s) 30 / 65 m/min Speed levels 2 Saw band length 2450 mm Saw band width 27 mm Saw band thickness 0,9 mm Material feed Table height material feed 925 mm Cutting range 0° round (tube) 220 mm 0° round (solid material) 120 mm 0° rectangular lying (hollow profile) 230 x 150 mm 0° bundle (tube) 230 x 120 mm -45° round (tube) 160 mm Dsdpfxog U Uv Ro Aqvskn -45° round (solid material) 85 mm -45° rectangular lying (hollow profile) 160 x 90 mm -60° round (tube) 90 mm -60° round (solid material) 55 mm -60° rectangular lying (hollow profile) 90 x 90 mm Art. No.: 3680001 S

Condition: new, cutting diameter 225 mm saw band length 2480 mm cutting width 250 mm cutting speed 45 / 90 m/min dimensions of saw-band 2480 x 27 x 0,9 mm capacity 45 degrees: flat 135 x 185 - 145 x 150 mm capacity 45 degrees: round 150 mm capacity 45 degrees: square 145 mm capacity 60 degrees: flat 63 x 107 - 69 x 90 mm capacity 60 degrees: round 70 mm capacity 60 degrees: square 70 mm Dodpfslb I Daex Aqvjkn capacity 90 degrees: flat 240 x 160 - 250 x 110 mm capacity 90 degrees: round 225 mm capacity 90 degrees: square 185 mm total power requirement 0,75 / 1,1 kW weight of the machine ca. 200 kg dimensions of the machine ca. 1385 x 580 x 890 mm Technical features: - Hydraulic head descent control system - End stop at the end of the cut - Powerful three-phase induction motor with 2 speeds and Transmission with oil bath - Saw frame, vice and swivel group made of cast steel - Steel blade guide with ball bearings - Vice with quick clamping - Lever integrated on the front for locking the miter adjustment - Coolant pump with aluminum body - Large hand wheel for easy saw blade tension - Pressure gauge to show the belt tension (600-1000 kg/cm3) - Emergency stop safety switch - Swarf brush for cleaning the saw blade STANDARD EQUIPMENT: - Mountable base cabinet - coolant tank - Electric coolant pump - Length stop for serial cuts - Band change and settings tools - Chip removal brush - Hydraulic cylinder with feed control

Year of construction: 1992, condition: good (used), machine/vehicle number: 29-0288, Offer 04612 Technical data: - Cutting range at 90° round 260 mm - flat 450 x 240 mm - Cutting range at 45° round 230 mm - flat 240 x 200 mm Dedsgin Ndopfx Aqvskn - Machine is mounted on original turnstile - saw band dimension 3660 x 25 x 0,9 mm - cutting speeds 20 / 35 / 50 / 70 m/min - Hydr. lifting + lowering of the saw frame - cutting pressure infinitely variable 0 - 10 m/min - Total drive power 400 V / 0,8 kW - Coolant device - space requirement approx. W 2100 x H 1200 x D 1000 mm - weight approx. 500 kg

Condition: used, Year of construction: 2011, cutting diameter 260 mm saw band length 3340 x 27 x 0,9 mm capacity 90 degrees: square 260 mm capacity 90 degrees: flat 380 x 260 mm band speed 37 / 74 m/min sawing motor 1,5 kW weight of the machine ca. 0,62 t dimensions of the machine ca. 1,7 x 1,4 x 1,3 m Miter band saw - Semi-automatic Dksdjwkvq Hepfx Aqvjn - Double miter - Material detection during lowering - incl. 7 saw blades

Condition: new, Year of construction: 2026, CORMAK HBS275 band saw, equipped with a hydraulic cylinder, a cooling system and an arm swivelling up to 60º, together with blades from renowned German company Röntgen, is used commonly in ironworking, where precision, quality and cutting speed are essential. Horizontal band saw with a swivelling arm for cutting metals, allows for cutting in plane perpendicular to the axis of material cut and at any angle from 0 to 60º. Material for cutting can be fed manually or with any mechanical feeding device, with automatic tool feed. Band guides are equipped with dedicated carbide plates and bearings. This has a huge impact on band guiding, its durability, cut straightness, cutting accuracy and quality. Carbide guiding drastically reduces the wear of the machine and blades. Machine's arm made of uniform cast iron as well as a 27 mm wide cutting band are capable of low and high quantity cutting of profiles and other materials. The vice is located in an adjustable bed, equipped with a quick clamp. Blade guides have cemented carbide plates and roller bearings. Its these cemented carbide guides that provide cut precision and straightness. The arm, positioned at an angle of 25º, thus increasing blade durability. To the bottom of the arm a brush wire is attached, ensuring clean and functional brush. Machine's drive is transmitted through a worm drive. A 3-phase motor with 2 cutting speeds and motor thermal protection. This cutting machine also has a strain gauge - a band tension sensor and an automatic switch-off in case the cutting band breaks. Upper part of the base constitutes a tank for flood coolant draining and chips produced during cutting. A cast iron workbench is attached to the base, with a swivel arm and control panel on separate arm. The main cutting move in the cutting process is moving the cutting band and the arm lowering feed. The arm lowering speed (the cutting speed) is adjusted with the hydraulic cylinder. The feed speed is controlled by the control panel. There are 2 cutting band speeds to choose from: 37.5 and 75 m/min. In rest arm position (after the cutting process) the cutting band drive is switched off automatically. Safety is ensured with cutting band guards and microswitches stopping the motor after cutting cycle is finished or after any of the guards are opened; additional protection consists of automatic switch-off of the band saw in case the cutting band breaks. Technical data Total power 1.5 kW Power supply 400V 50Hz Arm lowering control hydraulic cylinder Band dimensions 2455 x 27 x 0.9 mm Band speed 37.5/75 m/min Vice base height 900 mm Weight Dodpfx Ajudi Uneqvjkn 215 kg Angle 0º ø220 260 x 140 200 x 200 45º R ø160 160 x 140 160 x 160 60º R ø100 120 x 100 100 x 100

Condition: new, Year of construction: 2025, NEW! Sheet Folding Machine,Plate Bending Machine ZGR-1400/2,0 Our products are best quality and have certificate CE. You are buying directly from manufacturer ! Technical data: - Maximum working width: 1400 mm - Sheet gauge up to: 2,0 mm (Steel) !!! (specially enforced machine) - Aluminium Plate 2,5 mm Cooper plate 2,4 mm - Max. bending angle: 145 degrees Dkodpfjcpn Hbjx Aqvsn - Rotary shears cut to full working length - Thickness of bending bar: 24 mm - Protractor - Weight: 190 kg - Rotary shears (max. plate gauge 0,8 mm / Steel) as an option 350 Euro - edge pressing optional 75 Euro - The machine have certificate CE and 12 months warranty. Only shipping is possible Delivery every week and possible payment in cash on delivery Price excl. shipping We provide invoices with 0% of tax.

Condition: new, Year of construction: 2025, Delivery ex works Turkey Bending length (A): 3050 mm Press force: 170 tons Sheet thickness 42kgf / mm: 8 mm Sheet thickness 72kgf / mm: 4 mm Upper tool: 1260 Top Tool 85 ° Lower tool: 50, 35, 22, 16 Distance between columns (B): 2550 mm Forward speed: 130 mm / s Working speed: 8 mm / s Retraction speed: 120 mm / s Crowning: manual (CNC-motorized available for an extra charge) X-axis travel: 750 mm X-axis speed: 250 mm / s Backgauge fingers: 2 pieces Front support arms: 2 pieces Oil tank capacity: 180 liters Main motor power: 11 kW Stroke length (C): 265 mm Installation height (D): 450 mm Projection stand (E): 410 mm Table height (F): 870 mm Table width (G): 170 mm Length (L): 4200 mm Height (H): 2800 mm Width (W): 2200 mm Weight: approx. 7500 kg Cybelec Cybtouch 12 2D Graphic CNC control 3 axes (Y1, Y2, X) expandable with optional R+Z-Axis Eurostamp 2067 lower tool (V: 50, 35, 22, 16) Eurostamp 1260 upper tool 85 ° Narrow table All-steel welded construction Promecam quick clamping system CNC-controlled motorized backgauge (X: 750 mm) Adjustable backgauge fingers Inch and metric system can be selected Ground and chrome-plated cylinders Swiveling control panel Foot control with anti-panic stop & emergency shutdown Lateral protective grille (secured with limit switch) Light curtain on the back of the machine (900 mm) Dkedpogu N Aljfx Aqvsn DSP laser finger protection system at the front (CE) BOSCH / REXROTH or HOERBIGER / HAWE hydraulic system BOSCH / REXROTH or ECKERLE hydraulic pump Slidable front support arms (2 pieces) Electronics unit from: SIEMENS, SCHNEIDER, DELTA, ABB, OMRON 380 V 50 Hz Painting: RAL 7035, RAL 5015 Optional special accessories available at an additional cost: -CNC-controlled R-axis (250 mm) -CNC motorized crowning -Servo driven motors backgauge system for X + R axis (Mitsubishi) -Painting in special colors on customer request Documentation in German or English CE conformity

Condition: used, Year of construction: 1968, Technical details: bore capacity in steel (diameter): 40 mm throat: 380 mm Djdpfxevpfzyj Aqvokn bore stroke: 240 mm spindle taper MT: MK 5 spindle speed:: n.b. U/min feed: 01 / 0,14 / 0,2 / 0,28 / 0,4 (manuell+automatisch) mm/U Distance spindle/table max.: 200 - 800 mm table clamping surface:: 540 x 730 mm table rotating: 360 ° drill table adjustment: 600 (manuell) mm column diameter: Ø 220 mm base plate surface area: B: 510 x L: 510 mm total power requirement: 4,0 kW weight of the machine ca.: 1300 kg dimension machine xH: 1,2 x 0,95 x 2,35 m Operation via control panel and/or foot switch Mechanical thread cutting incl. vice *