Turning head

Sandvik Coromant R391.B03R-40F53 A

Condition: excellent (used), Motor-driven rotary shift table Stepless rotary table (pitch 0.001°) Fpodpfx Ajif Rlbsg Ijl Manufacturer: Rückle Type: PKT 6 Clamping surface: 1600 mm x 1600 mm Travel lengthwise: W-axis = 1000 mm Condition: Very good (used)

Condition: new, Year of construction: 2024, Protec KT 10000 welding positioner Fpjdjid Szvjpfx Ag Ijl Complete set with hand-held remote control 10,000 kg load capacity Diameter of the clamping plate: 2000 mm Height when tilted: up to 1600 mm to the center Height in horizontal position: 1920 mm Speed: continuously adjustable from 0.01 to approximately 0.35 RPM (higher speeds possible) Tilting angle: up to 120° Length: 2800 mm Width: 1920 mm Foot pedal remote control available at an additional cost of €390.

Condition: like new (used), Year of construction: 2000, Welding positioner, Heinrichsglück, 15-ton capacity Condition: like new Complete with accessories: handheld remote control, foot pedal, manual, documentation, electrical diagrams – everything is included Dimensions: Diameter of the clamping plate: 2200 mm Height when tilted (to center): 1450 mm Height in horizontal position: 1800 mm Speed: 0.025 to 1.1 RPM Tilting range: 0 to 135° Length: 3400 mm Width: 1800 mm plus 300 mm Weight: 8000 kg Fpjdpfjhcbmpex Ag Ijl

Condition: like new (used), Year of construction: 2025, Used cantilever rack: screw system in hot-dip galvanized design Scope of delivery: 4 rack uprights, height 4,160 mm with foot section, 1,200 mm usable depth 12 cantilevers with 1,200 mm usable depth, standard Longitudinal and diagonal struts for 4,000 mm rack length (distance 1,300 mm) Fastening material (screws, nuts and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 90 uprights in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Surface hot-dip galvanized - Rack height 4,160 mm - Load capacity per upright 2,250 kg - Foot section and cantilever arms with 1,200 mm Usable depth - Cantilever arms height adjustable in 100 mm increments - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and C4 load plates in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - On-site collection possible Fodpfx Agemhhf Sj Iopl Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight with registration before delivery. The material is packed sensibly to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and suitable for dowels and must be able to absorb the loads. The customer must check and ensure that the floor conditions and load-bearing capacity, as well as any official permits that may be required, are obtained. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and is not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: new, ZEATZ PHL Rotary Tables – for workpieces up to 150 tons The ZEATZ PHL linear series combines high-precision rotary table technology with an integrated linear axis. It enables flexible machining solutions for large and heavy workpieces – from precise positioning to simultaneous rotary and interpolation machining. Your advantages: ✔ Integration into existing machines with HEIDENHAIN, SIEMENS, or FANUC ✔ Original spare parts available in stock ✔ Technical support and on-site service in Germany ✔ Financing and lease-to-own options available upon request ✔ 24-month warranty Technical features: Table sizes: 1,000 x 1,000 mm 1,200 x 1,200 mm 1,500 x 1,500 mm 1,800 x 1,800 mm 2,000 x 2,000 mm 2,500 x 2,500 mm 3,000 x 3,000 mm 3,500 x 3,500 mm Fpsdpfem Tv Azox Ag Iol 4,000 x 4,000 mm (round clamping surfaces also possible) Max. workpiece weight: approx. 6,000 to 150,000 kg Linear axis: Travel range: approx. 1,000 to 3,000 mm (in 500 mm increments) Positioning accuracy: ± 5 arc seconds Integration: Compatible with HEIDENHAIN, SIEMENS, and FANUC controls Contact us – we will be happy to advise you and prepare a customized offer.

Condition: refurbished (used), Shaft milling cutter, Grooving milling cutter, Corner milling cutter Fjdpjiuh E Ijfx Ag Ijpl Manufacturer: Walter Type: Prototyp P 31 23017-20 Shaft diameter: 20 mm Cutting diameter: approx. 19 mm Cutting length: 38 mm Used, freshly ground and coated Material: HSS Co

Condition: new, Year of construction: 2020, table load: 60,000 kg, load capacity: 60,000 kg, DEMMELER DRALT 2500 tilting rotary table. New, newer used stored in heated warehouse. 2,500 x 2,500 mm, 60 ton. Fjdpfxjwdiwas Ag Ijpl Linear travel 2,500 mm. Tilting 10°. Continues rotating. Linear measuring system Heidenhein LC 185.

Condition: used, plate width 3000 mm plate depth 5000 mm plate height 400 mm weight 20 t Fpsdpfxogrnfgo Ag Ijl dimensions of the machine ca. 5 x 3 x 0,5 m Table length 5000 mm Table width 3000 mm Table height 380 - 400 mm Machine weight approx. Approx. 20000 kg Space requirement approx. 5 x 3x 0.5 m

Condition: new, Year of construction: 2024, functionality: fully functional, input voltage: 400 V, overall weight: 95 kg, Equipment: documentation/manual, type plate available, Extraction capacity of filter unit at spigot*: 2200 m³/h (free-eye) Total power consumption*: 0.62 kW Operating voltage: 400 V, 50/60 Hz,3Ph+PE Noise level*: 65 db(A) Dimensions L/W/H in mm: L 1623 / W 508 /H 545 Colour: RAL 7035 Weight: 95 kg Manufacturer: ISI Industrieprodukte GmbH *Depending on filter equipment Special voltage or special colour on request Filter equipment*: - 40 mm aluminium mesh pre-filter (optional/retrofittable: PrePac pre-filter package) - 1 piece electrostatic filter cell - 20 mm knitted aluminium post-filter (optional: 40 mm post-filter range) OPTIONAL: Several pre-filter packages possible The application: Horizontal, electrostatic air cleaner with EC centrifugal fan for separating oil mist, emulsion mist and smoke from the hall air in recirculation mode. Vertical raw air capture via intake manifold with suction nozzle. Clean air recirculation via adjustable diffusion grille. Your advantages of the ELBARON series: - 6 appliance variants available - Directly from the manufacturer - Electronically controlled EC fan as standard - Adjustable speed and air flow rate - Simplex (single-stage) or duplex (two-stage) available - Wide range of air flow rates available - Adaptable to pollutant load and air performance requirements Fedpsum Uzaofx Ag Iepl - Large programme of mounting and connection accessories - Quality made in Germany We have developed the hall extraction system as a cost-effective alternative to expensive centralised extraction systems or complex individual machine extraction systems. This allows you to protect the health of your employees and maintain your factory building without major investment. We have developed the ELBARON® filter series for use in machining operations with pure oil or for separating oil mist and smoke (oil mist separator). For many years now, the digital electrostatic air filters of the ELBARON® series have been among the most efficient filter devices on the market and are in use worldwide.

Year of construction: 2002, condition: good (used), machine/vehicle number: 8280, Offer 21463 Technical data: - Max. load capacity 10000 kg - Turntable dimensions 1400 x 1400 mm - Turntable hydraulically swivelable 0 - 90 / 135 ° - Rotation speed continuously adjustable 0.05 - 1.2 rpm - Clockwise and counterclockwise rotation controllable Fpodpfx Agehfwnqo Ijl - Welding current transmission approx. 500 A - Power supply 400 V - Table height in horizontal position approx. 2500 mm - Electric remote control - Space requirement approx. W 2000 x H 2500 x D 2700 mm - Weight approx. 5200 kg