Milling holders 60 pieces

Sandvik Coromant SK50 verschiedene Ausführungen

Condition: good (used), Year of construction: 2004, TBT ML 200-2-800 deep hole drilling machine Ltsdpfx Asvcbg Ssa Esa TECHNICAL DATA Type: ML 200-2-800 Year of construction: 2004 Control: Simatic OP17 Number of spindles: 2 Spindle distance: 12 mm Drilling slide stroke: 800 mm Drilling range: 1 - 10 mm Process: Single-lip drill Drilling depth: Immersion spindle: 110 mm Seal housing: 430 mm Sealing housing with steady rest: 400 mm Spindle drive: Power: 1.7 / 2.9 / 1.3 Voltage: 240 / 350 / 350 V Frequency: 100 - 800 Hz Weight: Approx. 2.6 T We assume no liability for the accuracy, completeness and up-to-dateness of the information provided

Condition: good (used), Year of construction: 2005, travel distance X-axis: 3,500 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 1,250 mm, In good technical condition. Year of modernization: 2005. Main electric motor power: 37 kW Installed machine power: 50 kVA Maximum machine length and width (including control cabinets): 7800 x 7200 mm Maximum machine height: 4900 mm Assembled floor space: 50 square meters Required installation height: 5800 mm Maximum workpiece weight: 12000 kg Work spindle diameter: 130 mm Spindle taper: ISO 50 Ledewc Sm Iepfx Aa Esta Work spindle throat: 800 mm Work spindle speed range: 5 to 1800 rpm Distance of spindle axis from table clamping surface (Y): 70 mm Table clamping surface: 2500 x 1800 mm

Condition: used, Tool holder, milling holder, milling tool -Number: 515x SK50 holders with tool holder from KOMET GEWEFA and others -Standard mount: ISO 7388-1 SK50 -Standard pull studs: ISO 7388-3 -various designs -Drill chuck: face chuck, reducing sleeves, cutter head, shell end mill, spindle tool -suitable for tool changers -Delivery complete as shown in the pictures -Dimensions: 10x Euro pallets Lsdpfopgkwgsx Aa Eota -Weight: 2464 kg

Condition: new, Straightening press 150 tons with electric motor and additional manual operation by a hand lever pump, especially for fine work. Versions: 30t 60t 100t 150t 200t ᐳ 200 t: on request Special machines: on request New machine! We are also happy to build a customer-specific press for you. High quality hydraulic workshop press with 150 tons maximum pressing force. The press can also be opened and closed in the classic electric mode using a lever. For fine work (e.g. pressing in bearings, straightening, ...) the press also has a hand pump. This allows you to fine-tune the force manually. The printing cylinder is attached to a sliding carriage so that the cylinder can be moved sideways. In this way, you can make optimal use of the maximum stand passage width. Particularities: - 150 tons maximum pressing force - Pressure display with manometer - 2 operating modes: electrical operation or or manual operation - 2 independent hydraulic pumps - Control cabinet with motor protection monitoring and safety devices - adjustable passage height Ledpof Sqcksfx Aa Esta - Pull chains for easy adjustment of the passage height - massive machine frame - cylinder laterally adjustable (mounted on sliding carriage) The press can be tested under power on site. ----- Numerous other workshop presses in different designs, sizes and with optional additional equipment available! 30, 60, 100, 150, 180, 200 tons. ----- Please just contact us, we will be happy to advise you without obligation. The stated price is net plus 19% VAT. All statements without guarantee! Europe-wide delivery possible! ----- The European Commission provides a platform for out-of-court online dispute resolution (OS platform). The offer serves exclusively as an internet presentation of our goods. The contract negotiation comes about by means of telecommunication (email, fax, telephone, news portal), where we first make you a non-binding offer, in which we inform you about our general terms and conditions and the right of withdrawal with imprint before the purchase / contract is concluded. Please just contact us, we will be happy to advise you without obligation.

Year of construction: 1990, condition: good (used), machine/vehicle number: 92041, table mounting size: 410 x 900 mm movements x/y/z: 560/410/380 mm Lodsdhhprspfx Aa Eeta spindle taper: SK 40 spindle turning speed range: 22 - 6000 rpm carriages: x/z until 10000, y until 240 mm/min space needed: 2600 x 2000 x 2300 mm weight: 3500 kg

Condition: used, Year of construction: 2017, Absolutely as good as new Consists of 1 measuring case 12-20mm Ltodpfxjvvxvdo Aa Eoa Consists of 1 measuring case 20-50mm Consists of 1 measuring case 50-100mm

Condition: new, Variable-speed ISO 40, Motorized cross table on all axes. 3-axis viewer included. Base with chip tank. Refrigeration system. Led lamp. Mechanical speed indicator. Variable speed motorized axes with rapids. Rail lubrication system with manual pump. Milling capacity with insert cutter : mm 100. Milling capacity : mm 35. Drilling capacity on cast iron with pre-hole : mm 60. Max drilling capacity on steel with pre-hole (s235jr) : mm 24. Spindle taper : ISO40 DIN2080. Spindle sleeve : mm 86. Spindle stroke : 120 mm. Head inclination : +/- 45°. Vertical head rotation : +/- 90°. Head body rotation : +/- 180°. Vertical spindle speed : (2) 60 ÷ 500 |500 ÷ 3600 rpm. Motor : 400 V 50 Hz 2.25 kW. Distance between machine nose and table : 45 - 395 mm. Ltjdpfxsh Im H Se Aa Eja Spindle-column axis distance : 215-450 mm. Table size : 1246 x 230 mm. Longitudinal table displacement : 850 mm. Transverse table displacement : 310 mm. Maximum load capacity : 400 kg. Dimensions : 1680 x 1500 x 2100 h mm. Net weight : 1000 kg.

Condition: used, Year of construction: 2007, functionality: fully functional, machine/vehicle number: 18780, travel distance X-axis: 850 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 500 mm, rotary table diameter: 800 mm, spindle speed (min.): 18,000 rpm, Technical Details: Used Universal Machining Centre HERMLE C 40U DYNAMIC Control: HEIDENHAIN iTNC 530 X-travel: 850 mm Y-travel: 700 mm Z-travel: 500 mm NC rotary swivel table: Ø800 mm 6-way rotary feedthrough Spindle speed: 18,000 rpm Air blast through spindle center Tool holder: HSK-A 63 Tool magazine: 38 positions Internal coolant supply: 80 bar Handwheel HR-410 Total power consumption: 41 kVA Machine weight: approx. 10.5 t Equipment/Features - Paper band filter - Coolant system - Chip conveyor - Sealed air for scales Ledpfxsx Ecmho Aa Eota - Heidenhain infrared probe - Blum A2 laser tool measurement system - 3D Quick Set - Electronic handwheel

Condition: used, Year of construction: 1956, machine/vehicle number: 17179, Heavy duty lathe, lathe, lathe, center lathe and lathe, center lathe -Manufacturer: Meuser, master and feed spindle lathe type M3A -Turning length: 1400 mm -Swivel Ø over bed: 550 mm -Rotating Ø without bed: 800 mm -Rotating Ø over support: 300 mm -Spindle bore: Ø 58 mm -Spindle speeds: 15 - 810 rpm Lodpfxeh Uuzye Aa Ejta -Three-jaw chuck: Röhm Ø 250 mm -Faceplate: 500 mm -Accessories: incl. tool holder/tools see photos -Tailstock mount: MK5 -Dimensions: 2770/1070/H1310 mm -Weight: kg

Condition: excellent (used), 16 end mills with indexable inserts Make Walter Weight 9.5 kg Ledpfx Aedx D Tvsa Esta