Used Salt Shaker for sale (496)

Condition: used, Type : Wall-mounted agitator Motor : 0,25 KW Prjdpex Ar R Dofx Aa Eof Total height of stand: 190cm Shaker shaft height: 60cm Supported by counterweight

Condition: like new (used), Year of construction: 2021, functionality: fully functional, Weiler Praktikant VCD Precision Lathe Manufacturer: Weiler Model: Praktikant VCD Precision Lathe Year of manufacture: 2013 Condition: used, very good, as-new condition, no signs of wear, incl. new servicing and measurement protocol prior to sale Centre distance: 650 mm Centre height: 160 mm Swing diameter over bed: 320 mm Swing diameter over cross slide: 190 mm Cross slide travel: 150 mm Top slide travel: 110 mm Top slide swivel range: +/-65° Bed slide guide length: 350 mm Bed width: 205 mm Turning tool cross-section (height x width): 20 x 20 mm Height from top slide to centre: 30 mm Spindle nose according to ISO DIN 702-3 (DIN55027) size 5 Spindle diameter at front bearing: 70 mm Prjdpfx Aaex I Rtke Eef Spindle bore: 43 mm Main spindle taper metric 50 Drive power: 6 kW Speed range: 30 – 4000 rpm Number of gear stages: 1 Number of speed ranges: stepless Number of feeds: 24 Longitudinal feed: 0.02 – 0.63 mm/rev Facing feed: 0.006 – 0.2 mm/rev Quill diameter: 40 mm Quill travel: 85 mm Quill taper: 3 Morse taper Weight, without packing and accessories, approx. 1150 kg Length / Width / Height, net: 1720 x 890 x 1700 mm Headstock / rear wall / sliding safety cover: Light grey RAL 7035 Machine base / machine bed: Basalt grey RAL 7012 Screen display housing: Blue NCSS 4550-R80B

Condition: ready for operation (used), functionality: fully functional, mileage: 60,430 km, power: 55 kW (74.78 HP), first registration: 09/2018, overall weight: 3,500 kg, fuel type: diesel, color: white, axle configuration: 4x4, maximum load weight: 1,600 kg, empty load weight: 1,900 kg, next inspection (TÜV): 10/2027, fuel: diesel, wheelbase: 1,600 mm, driver cabin: other, gearing type: hydrostat, emission class: euro5, operating hours: 8,211 h, Equipment: air conditioning, all wheel drive, hydraulics, soot filter, Hako Citymaster 1600 Vacuum Sweeper and Winter Service Vehicle – Single Ownership Comprehensive engine inspection including timing belt, water pump, oil, oil filter, and fuel filter will be carried out free of charge upon sale. Machine version equipped with new drive pedal system - 4,301 sweeping hours - 8,211 total operating hours - 60,430 kilometers 4×4 all-wheel drive – hydrostatic all-wheel drive system Psdpfox Ir Txox Aa Ejrf Including Kif snow plow, type CM 1600, 1,500 mm wide (as new/has never been used in snow) or optionally with Kif front broom, type CM 1600, 1,300 mm wide, year of manufacture 2019 (as new/has never been used in snow) – not shown in photos Including Gmeiner salt spreader, type Husky 500V FS with support legs (as new/used twice for testing) - Rear-view camera - Debris hopper made of stainless steel - Wheelbase: 1,600 mm - Track width: 1,055 mm - Fresh water tank: 180 liters - Unladen weight: approx. 1,900 kg - Permissible gross weight: 3,500 kg - Dimensions: Length 4,510 mm / Width 1,210 mm / Height 1,970 mm - Driving speed: 0–40 km/h - Working speed: 0–24 km/h - Noise attenuation package - Selectable working speeds: 1,600–2,400 rpm (ECO/Standard/MAX) - Engine: Water-cooled 4-cylinder VW industrial diesel engine - Low emissions Euro 5 - Fuel tank: approx. 60 liters - Hydrostatic all-wheel drive - Dual-circuit high-pressure hydraulics - Circuit 1 (front): 0–50 / 0–70 l/min at 225 bar - Circuit 2 (rear): 0–20 / 25 / 30 l/min at 195 bar - Hydraulic service brake via foot pedal - Cabin with air-suspended driver’s seat - Air conditioning / heating - Water recycling system - Hydrant connection - Dosing system - Permissible gross weight: 3,500 kg - Unladen weight: 1,950 kg Additional applications possible with optional HAKO attachments such as sweeping brushes, snow plows, or lawn mowers (not included in the offer). Errors, changes, and prior sale reserved. We sell solely in accordance with our Terms and Conditions and excluding any warranty. Errors, changes, and prior sale reserved. We are available Monday to Friday from 9:00 a.m. to 5:00 p.m. continuously; Saturdays by appointment. Outside of these hours, appointments can be made by phone. We are happy to accept your current used machine/vehicle in trade-in. Priority is given to sales to commercial customers and exporters – this applies to our entire vehicle inventory. The above details are non-binding. Errors, changes, and prior sale reserved!

Condition: used, mileage: 211,281 km, power: 169 kW (229.78 HP), first registration: 04/1992, fuel type: diesel, empty load weight: 7,780 kg, maximum load weight: 10,220 kg, overall weight: 18,000 kg, axle configuration: 4x2, wheelbase: 4,200 mm, brakes: engine braking, color: orange, driver cabin: day cab, gearing type: mechanical, suspension: steel-air, number of seats: 3, total length: 8,250 mm, Equipment: ABS, differential lock, Salt spreader Pietsch STA 95 B50HFV no. 220523, year of manufacture 02. Snow plough Beilhack PV27-4 no. 10/257, year of manufacture 90. Non-binding offer – subject to change and prior sale. Sale takes place with exclusion of any warranty – all information without guarantee! Company holidays from 20.12.2025 – 04.01.2026, our business will be closed. We wish you happy holidays and a happy new year. We are closed from 21.12.2024 up to 05.01.2025. We wish you a Merry Christmas and a Happy New Year. Prsdpfxjxuvk Ss Aa Esf

Condition: used, This listing is for 1 of 11 Invitrogen Powerease 500 Power Supply. The unit is in full working condition and is ready for immediate release. This listing is for the Life Technologies Invitrogen Power Ease 500 Electrophoresis Power supply The unit is in full working condition and is ready for immediate release he Invitrogen PowerEase 500 is a high-performance, programmable electrophoresis power supply, specially designed for use with mini gel electrophoresis systems. It offers robust features tailored for precision, convenience, and safety in protein and nucleic acid gel electrophoresis applications. External Dimensions (W × D × H): 16.5 × 27 × 20 cm Weight: 2.9 kg (6.4 lbs) Features & Functionality Pedpfx Aaexx Afke Esrf Designed for Mini Gels: Optimized for use with mini gel electrophoresis setups. LCD Display: 240 × 128 pixel interface displaying real-time run data. Parallel Port Connectivity: Can be connected to most printers with a parallel port for printing detailed run logs. Run Data Logging: Displays number of gels, current, voltage, power, and temperature during operation. Pre-Programmed Modes: 8 pre-set methods specifically for Novex™ gels 4 user-defined custom methods Multiple Gel Support: Up to 10 Tris-Glycine gels (5 mini-cells) Up to 2 NuPAGE™ gels (1 mini-cell) Up to 6 NuPAGE™ Tris-Acetate gels (3 mini-cells) Control Modes: Constant voltage, constant current, and constant power modes. Safety Protections: Open/short circuit, thermal overload, overvoltage, and overcurrent safeguards. Programmability: Stores up to 16 custom user protocols. Linear Voltage Ramp: Instantaneous voltage ramping capability. Optional Temperature Probe: Supports thermal shutoff with probe. Usage & Maintenance Tips Cold Room Usage: LCD may fade at low temperatures but returns to normal once warmed. Regular Cleaning: Prevent salt deposits by occasional cleaning. Safety: Avoid connecting/disconnecting leads while the high-voltage indicator is active.

Condition: used, Year of construction: 2006, gearing type: other, first registration: 01/2006, color: orange, overall weight: 12,000 kg, mileage: 1,001 km, empty load weight: 2,000 kg, maximum load weight: 10,000 kg, driver cabin: other, Vehicle location: Bovenden, Body: Demountable salt spreader approx. 5 m³, mounted on a hooklift frame! Unladen weight approx. 2,000 kg! Pedpfx Aaexq E T Uo Eerf Salt spreader approx. 5 m³. ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to change, interim sale, and errors reserved!

Condition: used, Year of construction: 2000, operating hours: 15,800 h, Used Bottle Washer KLINGER up to 9600 bph This Bottle Washer handles up to 9,600 bottles per hour. The machine features 20 bottles per row, ensuring a long soaking time and double lye pumps. Constructed entirely of stainless steel, this bottle washer uses a Siemens S7 control system, ensuring reliable and precise operation. Technical Specifications of the Washing System The Used Bottle Washer KLINGER up to 9600 bph includes double heaters and overflow pumps, providing a high cleaning capacity. Consequently, this configuration treats each bottle uniformly, enhancing the efficiency of the washing process. The Siemens S7 control system, furthermore, offers a user-friendly interface via a touch panel, simplifying operational management. Potable Water Treatment Plant Potable water treatment plays a crucial role in the proper functioning of the bottle washer. Hager + Elsässer provides the plant, which includes cation and anion exchangers, a salt container, a pre-filter, and a UV probe. This system processes 5 m³/h, ensuring high-quality water. Additionally, the reverse osmosis (RO) plant delivers a total desalination capacity of 2.5 m³/h, ensuring pure water for the washing process. Predpfx Aoxqmrfsa Ejf Electrical Configuration and Control Panels This Bottle Washer features three electrical panels, arranged from left to right, with a Siemens touch panel for centralized control. This configuration allows for accurate monitoring and optimal operational management. In addition, the upper panels handle cooling, with a total residence time of 4.13 minutes and a treatment time of 1.63 minutes. Technical details Bottle cells: width and diameter: height 100 mm. 360 mm spray hole in the base of the cell diameter 20 mm. The bottle cell is not round on the lower insertion side, but flattened , so that even bottles with small diameters can be inserted into the cell without any problems. Bottles from 200 ml to 1,500 ml can be rinsed. The diameter of the bottle mouth must not be smaller than the spray hole in the bottom of the cell, i.e. at least 20 mm. If the bottles are very light, or made of PVC, the spray pressure of the pumps could be reduced using software, so that the bottles are not sprayed out of the cell. Fort PVC bottles the diameter of the bottles should not be smaller than 50 mm, depending on the shape and weight. The higher the weight, the better… PVC bottles do not cause problems because of their shape or diameter, but are usually too light… So your bottles can be easily worked. Treatment and Spraying Details of the Used Bottle Washer KLINGER up to 9600 bph The central panel, on the other hand, manages the spraying times with the following specifications: Spraying soda: 0.5 min. Residual soda: 0.83 min. Hot water: 0.38 min. Warm water: 0.38 min. Cold water: 0.38 min. Fresh water: 0.

Condition: used, mileage: 34,000 km, first registration: 07/1995, empty load weight: 4,350 kg, maximum load weight: 7,500 kg, axle configuration: 2 axles, fuel: diesel, gearing type: mechanical, emission class: euro1, suspension: steel, load capacity: 3,150 kg, Salt spreader + blade Brush cutter Rotating beacon Prodpjx E R R Rsfx Aa Ejf

Condition: ready for operation (used), operating hours: 8,211 h, functionality: fully functional, mileage: 60,430 km, power: 55 kW (74.78 HP), first registration: 09/2018, overall weight: 3,500 kg, fuel type: diesel, color: white, axle configuration: 4x4, maximum load weight: 1,600 kg, empty load weight: 1,900 kg, next inspection (TÜV): 10/2027, fuel: diesel, wheelbase: 1,600 mm, driver cabin: other, gearing type: hydrostat, emission class: euro5, Equipment: air conditioning, all wheel drive, hydraulics, soot filter, Hako Citymaster 1600 Vacuum Sweeper & Winter Service Vehicle – from First Owner - Major engine service including timing belt, water pump, oil, oil filter, and fuel filter will be carried out free of charge by us upon sale - Machine equipped with new drive pedal system - 4,301 sweeping operation hours - 8,211 total operating hours - 60,430 kilometers - 4×4 all-wheel drive – hydrostatic all-wheel drive Includes: - Kif snow plow, type CM 1600, 1,500 mm wide (like new – has never seen snow), or optionally with Kif front broom, type CM 1600, 1,300 mm wide, year 2019 (like new – has never seen snow, not shown in photos) - Gmeiner salt spreader type Husky 500V FS with support stands (as new – used twice for testing) - Rear-view camera - Stainless steel debris hopper - Wheelbase: 1,600 mm - Track width: 1,055 mm - Fresh water tank: 180 liters - Unladen weight: approx. 1,900 kg - Permissible gross weight: 3,500 kg - Dimensions (LxWxH): 4,510 mm / 1,210 mm / 1,970 mm - Driving speed: 0–40 km/h - Working speed: 0–24 km/h - Noise reduction package - Selectable working speeds: 1,600–2,400 rpm (Eco/Standard/Max) - Engine: water-cooled 4-cylinder VW industrial diesel - Low emissions Euro 5 - Fuel tank approx. 60 L - Hydrostatic all-wheel drive - 2-circuit high-pressure hydraulics: Circuit 1 (front): 0–50/0–70 l/min, 225 bar Circuit 2 (rear): 0–20/25/30 l/min, 195 bar - Hydraulic service brake via foot pedal - Cabin with air-suspended driver seat - Air conditioning/heating - Water treatment system - Hydrant connection - Dosing system - Permissible gross weight: 3,500 kg - Unladen weight: 1,950 kg - Other applications possible using additional HAKO attachments such as sweeping brooms, snow ploughs, and mowers (not included in the offer) Errors, changes, and prior sale excepted. We sell exclusively on the basis of our terms and conditions (AGB) and exclude any form of warranty. Errors, changes, and prior sale excepted. We are available Monday–Friday from 9:00 am to 5:00 pm non-stop, Saturday by appointment. Outside these opening hours, appointments can be made by telephone. We are happy to accept your current used machine/vehicle as a trade-in. We prefer to sell to business customers and exporters—this policy applies to our entire vehicle stock. All above information is non-binding; errors, changes, and prior sale excepted! Prodpfex Ir Snjx Aa Esf

Condition: good (used), functionality: fully functional, Frigoscandia FloFreeze MX62 IQF tunnel freezer in good condition, operating on NH3 (ammonia). Suitable for rapid, individual quick freezing of products such as vegetables, berries, shrimp, and pasta. Supplied complete with infeed/outfeed systems, shaker, optional glazing conveyor, evaporators, control cabinets, Danfoss frequency converters, and Siemens TP1200 Comfort HMI (upgraded in 2020). Products are placed on the infeed shaker (approx. 1200 mm high), where they are separated and desticked. They are then transported into the freezer via a blue plastic conveyor belt. The belt is approximately 7400 mm long and 1190 mm wide, featuring a lowering mechanism that redistributes products and removes ice. The discharge height is 912 mm. The optional Innotec Systems glazing belt can apply a protective ice coating. The MX62 is equipped with two NH3 evaporators and six centrifugal fans, each driven by an ABB M2AA160MA-2 motor (50 Hz, 13.2 kW, 2897 rpm). Cold air is blown up through the conveyor to prevent product sticking. The evaporators can be defrosted with hot air via spray nozzles. The freezer is fitted with three inspection hatches. Includes the original control cabinets with frequency converters and Siemens control system. The FloFreeze MX62 specifications: - Dimensions: 7400 x 4700 x 3000 mm (L x W x H) - Effective belt length: 7400 mm - Effective belt width: 1190 mm - Infeed height: 1200 mm - Discharge height: 912 mm Tunnel freezer capacity (examples): Product: Green peas - Capacity: 3,600 kg/h - Infeed temperature: +10°C - Discharge temperature: -18°C - Evaporator temperature: -40°C Product: Cauliflower - Capacity: 2,520 kg/h - Infeed temperature: +10°C - Discharge temperature: -18°C - Evaporator temperature: -40°C - Piece size: 25 to 40 mm Product: Tomatoes - Capacity: 1,440 kg/h - Infeed temperature: +10°C - Discharge temperature: -18°C - Evaporator temperature: -40°C - Piece size: approx. 30 mm Product: Strawberries - Capacity: 2,520 kg/h Prjdpjxz Eacofx Aa Eof - Infeed temperature: +10°C - Discharge temperature: -18°C - Evaporator temperature: -40°C - Piece size: 25 to 35 mm Product: Potatoes - Capacity: 1,800 kg/h - Infeed temperature: +10°C - Discharge temperature: -18°C - Evaporator temperature: -40°C - Piece size: approx. 25 mm Product: Meat - Capacity: 2,340 kg/h - Infeed temperature: -3°C - Discharge temperature: -18°C - Evaporator temperature: -40°C - Piece size: cubes of 20 mm

Condition: used, This listing is for a Zeiss Axioskop EL-Einsatz 5 Objectives Microscope. The unit is in full working condition and is ready for immediate release. Objective Lenses supplied: Plan 100/1.25 Plan 40X/0.66 Plan 20x/0.40 Achroplan 10x/0.25 SPL10/0.25 Zeiss Axioskop EL-Einsatz 5 Microscope Overview The Zeiss Axioskop EL-Einsatz 5 microscope is a sophisticated instrument designed for advanced microscopy tasks, particularly in research and clinical settings. Its range of objective lenses and features supports high-quality imaging and user-friendly operation. Key Features: Water Immersion: Psdpfx Aasxxzlij Eerf These objective lenses are designed for application in physiological salt solutions, making them perfect for examining thick biological specimens, such as brain sections. High Numerical Aperture (NA): The lenses feature high NA values (e.g., 0.80 for the 50x lens), enhancing light-gathering capability and image resolution, especially beneficial for fluorescence microscopy. Fluorescence Capabilities: The Axioskop EL-Einsatz 5 can capture fluorescent images across four channels. The system automatically adjusts brightness and white balance, simplifying the imaging process. Ergonomic Design: With an adjustable ergotube, users can comfortably position the eyepieces for extended use. Essential controls are conveniently located for ease of access. Smart Microscopy: The microscope is built for efficiency, featuring automatic adjustments that minimize the need for manual intervention, streamlining workflow. Applications: The Zeiss Axioskop EL-Einsatz 5 is suitable for a variety of applications, including: Materials Science and Metallography: Ideal for examining the microstructure of materials and conducting failure analysis. Physiology and Electrophysiology: Great for observing living cells and tissues, understanding physiological processes in real-time. Biomedical Research and Clinical Diagnostics: Useful for analysing biological samples, including histological sections and cultured cells, contributing to disease research and diagnostics. Microscopy Tasks Requiring Advanced Imaging Capabilities: Perfect for researchers needing high-resolution images and automation in their microscopy tasks.

Condition: used, mileage: 129,615 km, power: 240 kW (326.31 HP), first registration: 08/2010, fuel type: diesel, empty load weight: 11,400 kg, maximum load weight: 6,600 kg, overall weight: 18,000 kg, axle configuration: 4x4, wheelbase: 3,900 mm, next inspection (TÜV): 04/2025, brakes: constant throttle, color: orange, driver cabin: day cab, gearing type: mechanical, emission class: euro5, suspension: steel, number of seats: 2, loading space length: 4,000 mm, loading space width: 2,420 mm, loading space height: 600 mm, Equipment: ABS, additional headlights, air conditioning, all wheel drive, cabin, crane, cruise control, differential lock, fog lights, immobilizer system, low noise, onboard computer, power assisted steering, seat heater, trailer coupling, Vehicle location: Bovenden. Steel superstructure, designated as residential, 1x comfort seat, seat heating, rear window, electric mirrors, heated mirrors, electric window left, electric window right, sun visor, cruise control, 8-speed manual transmission, ABS (Anti-lock Braking System), constant throttle, PTO, raised exhaust, differential lock, high beam, work lights, rotating beacon, tool/storage box, leaf suspension, trailer hitch with pneumatic, electrical, and hydraulic connections (AHK Luft-Licht-Hydr.), low-noise G1, winter service equipment, lashing eyes, folding underride guard, pendulum tailgates, roof hatch, crane behind cabin, emergency stop, grab control, foldable, 2-point mechanical outriggers, radio remote control, 2x hydraulic extensions, green environmental badge. Wheelbase: 3900 mm. Superstructure: Meiller 3-way tipper body with Terex TLC 92.2-7.3 crane and remote control, front mounting plate, 9t front axle, rear axle H7 13t crown wheel 300, ABS, drum brakes front and rear, rear axle stabilizer, steel bumper, parameterizable special module (PSM), pre-installed toll recording system, distributor cockpit, on-board diagnosis 2, tank capacity: 300l, reverse warning system, pollen filter, Meiller 6-piston pump type 265, MB 131-2c PTO intermediate shaft, rear engine take-off for hydraulics SAE-A max 120Nm. Load diagram: 1.91m - 4400kg, 3.85m - 2390kg, 5.55m - 1630kg, 7.25m - 1240kg! Loading height approx. 1580mm. Matching salt spreader -9373- available at extra cost! ACCESSORY DETAILS WITHOUT GUARANTEE, subject to changes, prior sale, and errors! Predpfxsx It Nhj Aa Eof

Condition: like new (used), functionality: fully functional, mileage: 35,000 km, power: 175 kW (237.93 HP), first registration: 01/2013, overall weight: 13,300 kg, fuel type: diesel, color: white, axle configuration: 4x4, next inspection (TÜV): 01/2025, fuel: diesel, gearing type: semi-automatic, Year of construction: 2013, additional equipment features: verschiebbares Lenkrad, Equipment: additional headlights, air conditioning, hydraulics, trailer coupling, truck registration, Unimog U400 used - sweeper/vacuum cleaner - winter service equipment Vehicle type: tractor Make: Daimler (D) Type / sales name: Unimog 405 / Unimog U400 BlueTec5 Type of body: implement carrier Psdpfx Asvzg Eqea Ejrf First registered: January 3rd, 2013 Color: white Displacement cc / power kW: 6,374 / 175 Engine type: diesel Curb weight: 8,690 kg Permissible total weight: 13,300 kg Seats/doors: 2/2 Next MOT: 01/2025; SP: 07/2025 Mileage reading: approx. 35,000 Tires: 365/85 R20 164G Standard equipment: Diesel engine Mercedes Benz OM 906 LA, Ad-Blue admixture, Compressed air connections for trailer operation, Front PTO, Hydraulic system with bio-oil filling - Vario Pilot change steering - Comfort seat left/right - Rear view camera with monitor - Radio MB with Bluetooth - Radio installation - Outside mirrors electrically adjustable and heated - Electric window lifter - Electrically heated windshield - Yellow rotating beacons - Red/white warning markings - Control panel for mounted spreader - Front mounting plate size 3 - Front PTO - Hydraulic connections at the front - Vario Power power hydraulics - Exhaust system converted for operation with sweeper body - Additional headlights for operation with front attachments - Suction and Trilety TK 35 sweeper body, white, serial number 160, built in 11/2008 - with hydraulic blower drive, warning markings, rotating beacons and parking device. - Schmidt CP2 snow clearing blade, orange, serial number CP2-61-1-00, weight 765 kg, built in 2007 - with attachment holder for Unimog mounting plate, hydraulically pivotable (largest width 2,700 mm on the scraper bar, clearing width 2,290 mm when swiveled 32 degrees), with plow lighting, warning flags and parking device. - Schmidt Stratos B27-21 VCLN-490 mounted spreader, white/blue, No. 52B37108, capacity 2.7 m³, wet salt 1210 l, year of manufacture 2012, weight 778 kg, maximum weight 7,500 kg - with mount for Unimog U400, swivel tarpaulins, foreign body grille (walkable), warning markings, rotating beacon and parking supports Condition of vehicle and attachments according to age Rust spots, scratches, etc. present Exhaust system rusted Hydraulic system slightly oily/leaky VAT can be declared Questions, more pictures or test drive no problem! We are not obliged to sell, so please only realistic inquiries, others will not be answered!!!

Condition: used, Year of construction: 1996, Inlet diameter: 160 mm. Nominal air volume flow: 1900 m³/h. Max. air volume flow: 2050 m³/h. Filter area: 9.2 m². Filter cleaning: shaker motor. Chip disposal: 1 collection bin. Collection volume: 200 liters. Filter material: polyester needle felt. Vacuum at nominal flow: 2580 Pa. Installation: mobile. Motor power: 3 kW. Electrical connection approx.: 400 V/50Hz. Storage location: Prsdpfex Hwqtox Aa Esf

Condition: ready for operation (used), functionality: fully functional, mileage: 51,892 km, power: 55 kW (74.78 HP), first registration: 09/2018, overall weight: 3,500 kg, fuel type: diesel, color: white, axle configuration: 4x4, maximum load weight: 1,600 kg, empty load weight: 1,900 kg, next inspection (TÜV): 10/2027, fuel: diesel, wheelbase: 1,600 mm, driver cabin: other, gearing type: hydrostat, emission class: euro5, operating hours: 7,808 h, Equipment: air conditioning, all wheel drive, hydraulics, soot filter, Hako Citymaster 1600 Suction Sweeper and Winter Service Vehicle – One Owner Major engine inspection with timing belt, water pump, oil, oil filter, and fuel filter was performed at 51,892 km in 10/2025 Machine version with new drive pedal system 3,952 sweeping operation hours 7,808 total operating hours 51,892 kilometers 4×4 all-wheel drive – hydrostatic all-wheel drive Includes Kif snow blade, type CM 1600, 1,500 mm wide (like new/never used in snow) or, optionally, with Kif front broom, type CM 1600, 1,300 mm wide, year of manufacture 2019 (like new/never used in snow), not shown in the pictures Includes Gmeiner salt spreader, type Husky 500V FS, with support legs (as new/used twice for testing) Reversing camera Sweeping debris container in stainless steel Wheelbase: 1,600 mm Track width: 1,055 mm Fresh water tank: 180 liters Unladen weight: approx. 1,950 kg Permissible gross weight: 3,500 kg Dimensions: Length – 4,510 mm / Width – 1,210 mm / Height – 1,970 mm Podpfx Asx Ir Ivja Eerf Driving speed: 0-40 km/h Working speed: 0-24 km/h Noise insulation package Selectable working speeds: 1,600 – 2,400 rpm (ECO/Standard/MAX) Engine: water-cooled 4-cylinder VW industrial diesel engine Low emissions Euro 5 Fuel tank capacity: approx. 60 liters Hydrostatic all-wheel drive 2-circuit high-pressure hydraulics: Circuit 1 (front) 0–50/0–70 l/min 225 bar; Circuit 2 (rear) 0–20/25/30 l/min 195 bar Hydraulic service brake via foot pedal Cab with air-suspended driver's seat Air conditioning / heating Water treatment system Hydrant connection Dosing system Permissible gross weight: 3,500 kg Unladen weight: 1,950 kg The spreader is powered and operated by the machine's hydraulic system. Other application possibilities through additional HAKO attachments (e.g., sweepers, snow plows, and mowers) possible (not included) Subject to errors, alterations, and prior sale. We sell exclusively under our General Terms and Conditions and exclude any form of warranty. Errors, alterations, and prior sale are reserved. We are available Monday to Friday from 9:00 a.m. to 5:00 p.m. without interruption, Saturday by appointment; outside these hours, appointments can be arranged by phone. We will gladly accept your current used machine/vehicle as a trade-in. Sales to commercial customers and exporters are given priority; this applies to our entire vehicle inventory. The above information is non-binding. Subject to errors, alterations, and prior sale!

Condition: good (used), Code: 0264 Brand: VENTILAZIONE MAPELLI Prsdpfx Ajx Hin Dea Ejf Model: GM 36 PLUS - CE Standard Vacuum system with 4 collection bag complete with 36 filter bags - Motor 25 Hp Technical data: Filtering group for four-gathering-sack-suction line with 36 filter bags Filter composed of: one upper filtering room made of painted 15/10 zinc-coated steel panels with one access door with 36 cotton bags designed for the air flow speed of 0,03 m/s, one electromechanical sleeve-shaker vibrator, one roof and stainless steel decorative profiles, one anti-bursting ATEX panel. One lower tank with tube plate, 4 supporting legs of painted zinc-coated steel, four hoppers, which channel waste material toward the gathering-sacks. One centrifugal fan with one motor Hp 25 (Kw 18,5), one air discharge tube of stainless steel with analysis outlet and one pressure differential cut-out to test the efficiency of the filtering room

Condition: used, This listing is for the Life Technologies Invitrogen Power Ease 500 Electrophoresis Power supply The unit is in full working condition and is ready for immediate release he Invitrogen PowerEase 500 is a high-performance, programmable electrophoresis power supply, specially designed for use with mini gel electrophoresis systems. It offers robust features tailored for precision, convenience, and safety in protein and nucleic acid gel electrophoresis applications. External Dimensions (W × D × H): 16.5 × 27 × 20 cm Weight: 2.9 kg (6.4 lbs) Features & Functionality Designed for Mini Gels: Optimized for use with mini gel electrophoresis setups. LCD Display: 240 × 128 pixel interface displaying real-time run data. Parallel Port Connectivity: Can be connected to most printers with a parallel port for printing detailed run logs. Run Data Logging: Displays number of gels, current, voltage, power, and temperature during operation. Pre-Programmed Modes: 8 pre-set methods specifically for Novex™ gels 4 user-defined custom methods Multiple Gel Support: Up to 10 Tris-Glycine gels (5 mini-cells) Up to 2 NuPAGE™ gels (1 mini-cell) Up to 6 NuPAGE™ Tris-Acetate gels (3 mini-cells) Control Modes: Constant voltage, constant current, and constant power modes. Prjdsxv A N Ropfx Aa Eef Safety Protections: Open/short circuit, thermal overload, overvoltage, and overcurrent safeguards. Programmability: Stores up to 16 custom user protocols. Linear Voltage Ramp: Instantaneous voltage ramping capability. Optional Temperature Probe: Supports thermal shutoff with probe. Usage & Maintenance Tips Cold Room Usage: LCD may fade at low temperatures but returns to normal once warmed. Regular Cleaning: Prevent salt deposits by occasional cleaning. Safety: Avoid connecting/disconnecting leads while the high-voltage indicator is active.

Condition: used, Year of construction: 2025, New display machine! Powerful dust extraction unit according to DIN 8416 for the extraction of processing machines, suitable for installation in the working area outside explosive atmospheres. Key design features include: - Robust, galvanized steel sheet construction - Space-saving, compact design - Delivered ready for operation - Low energy consumption with high performance due to clean air side high-performance fan with special impeller - 2 large-volume collection containers with insert bags - Collection volume approx. 350 l - High operational safety and long service life through filters certified by the German employers' liability insurance association Podjx Hwp Ajpfx Aa Eerf - Motorized filter cleaning device with automatic control and runtime addition - PLC control with automatic start (additional slide valve control available at extra cost) - Connection cable, 5 m long, with plug - Manufactured according to DIN 8416 - Residual dust content in the exhaust air under 0.1 mg/m3 - Passed GS-HO-14 "GS - H3" testing Technical data: Suction nozzle arrangement: left Nominal airflow rate*: 1,450 m³/h Max. airflow rate: 1,950 m³/h Vacuum at the interface*: - at nominal airflow: 3,200 Pa - at max. airflow: 2,700 Pa Filter area: 10.3 m² Suction nozzle: 160 mm Nozzle height, approx.: 1,500 mm (centered) Fan motor: 2.20 kW, 3x400 V, 50 Hz Shaker motor: 0.12 kW, 3x400 V, 50 Hz Pre-fusing: 16 A (on-site) Sound pressure level: 73.0 dB(A) Weight, approx.: 365 kg Dimensions (L x W x H): 1,648 x 1,012 x 1,990 mm * Required specification according to GS-HO-07 at 20 m/s and loaded filter bags (beech test dust). In delivery condition and under practical conditions with coarser dust, the suction performance is significantly higher. Location: Rieth

Condition: ready for operation (used), operating hours: 7,808 h, functionality: fully functional, mileage: 51,892 km, power: 55 kW (74.78 HP), first registration: 09/2018, overall weight: 3,500 kg, fuel type: diesel, color: white, axle configuration: 4x4, maximum load weight: 1,600 kg, empty load weight: 1,900 kg, next inspection (TÜV): 10/2027, fuel: diesel, wheelbase: 1,600 mm, driver cabin: other, gearing type: hydrostat, emission class: euro5, Equipment: air conditioning, all wheel drive, hydraulics, soot filter, Hako Citymaster 1600 Vacuum Sweeper and Winter Service Vehicle from First Owner - Major engine service including timing belt, water pump, oil, oil filter, and fuel filter performed at 51,892 km in 10/2025 - Machine configuration with new drive pedal system - 3,952 sweeping operating hours - 7,808 total operating hours - 51,892 kilometers - 4×4 all-wheel drive – hydrostatic all-wheel drive system - Includes Kif snow plow type CM 1600, 1500 mm wide (as new/has never seen snow) or optionally with Kif front broom type CM 1600, 1,300 mm wide, year of manufacture 2019 (as new/has never seen snow), not shown in pictures - Including Gmeiner salt spreader type Husky 500V FS with parking supports (as new/used only twice for testing) - Reversing camera - Sweeping debris container in stainless steel - Wheelbase: 1,600 mm - Track width: 1,055 mm - Fresh water tank: 180 liters - Unladen weight: approx. 1,950 kg - Permissible total weight: 3,500 kg - Length: 4,510 mm / Width: 1,210 mm / Height: 1,970 mm - Driving speed: 0–40 km/h - Working speed: 0–24 km/h - Noise insulation package - Selectable working speeds: 1,600 – 2,400 rpm (ECO/Standard/MAX) - Engine: water-cooled 4-cylinder VW industrial diesel engine - Low-emissions Euro 5 - Fuel tank approx. 60 liters Prjdpex Ir Iiefx Aa Ejf - Hydrostatic all-wheel drive system - Two-circuit high-pressure hydraulics: Circuit 1 (front): 0–50/0–70 l/min at 225 bar Circuit 2 (rear): 0–20/25/30 l/min at 195 bar - Hydraulic service brake via foot pedal - Cabin with air-suspended driver’s seat - Air conditioning / heating - Water treatment system - Hydrant connection - Dosing system - Permissible total weight: 3,500 kg - Unladen weight: 1,950 kg - The spreader is powered and operated via the machine’s hydraulic system. Other possible applications for the HAKO machine via additional attachments such as sweeping brooms, snow plows, and lawn mowers (not included in scope of delivery). Subject to errors, changes, and prior sale. We sell exclusively under our terms and conditions and exclude any warranty. Subject to errors, changes, and prior sale. We are available Monday to Friday from 9:00 am to 5:00 pm, Saturday by appointment. Outside these business hours, appointments by phone are possible. We gladly accept your current used equipment/vehicle in part exchange. Preference is given to sales to business customers and exporters, this applies to our entire vehicle inventory. The above information is non-binding; errors, changes, and prior sale excepted.

Condition: used, functionality: fully functional, mileage: 23,640 km, power: 52 kW (70.70 HP), first registration: 07/2013, fuel type: gasoline, empty load weight: 1,170 kg, maximum load weight: 830 kg, overall weight: 2,000 kg, axle configuration: 4x2, next inspection (TÜV): 12/2027, color: white, driver cabin: other, gearing type: mechanical, emission class: euro5, suspension: steel, number of seats: 2, loading space length: 1,900 mm, loading space width: 1,400 mm, loading space height: 600 mm, number of previous owners: 1, Equipment: ABS, power assisted steering, truck registration, Piaggio Porter / Pfau Unijet Tipper 1.3 From 1st owner = former municipal / government vehicle Low-emission Euro 4 Green environmental badge Power steering Winter service equipment Hydraulically adjustable snow plough Mounted salt spreader XL driver’s cab Raised side panels Raised front wall Yellow beacon Lashing points on the loading area Former city vehicle Vehicle is in unprepared/unrefurbished condition. Payload: 830 kg Unladen weight: 1,170 kg Gross vehicle weight: 2,000 kg Loading area dimensions in mm: L: 1,900 | W: 1,400 | H: 600 Errors, changes and prior sale excepted. We sell exclusively according to our terms and conditions and under exclusion of any warranty. Errors, changes, and prior sale excepted. We are available Monday – Friday from 9:00 to 17:00 non-stop, Saturday by appointment; outside these hours, telephone appointments can be arranged. We will gladly accept your used machine/vehicle as part exchange. Sales to traders and exporters are given preference. This applies to our entire vehicle stock. The above information is non-binding. Errors/changes and prior sale excepted. Pedpfxsx Dl D Ho Aa Eorf

Condition: ready for operation (used), functionality: fully functional, mileage: 22,348 km, power: 55 kW (74.78 HP), first registration: 04/2018, overall weight: 3,500 kg, fuel type: diesel, color: white, axle configuration: 4x4, empty load weight: 1,950 kg, next inspection (TÜV): 05/2026, fuel: diesel, wheelbase: 1,600 mm, driver cabin: other, gearing type: hydrostat, emission class: euro5, operating hours: 3,979 h, Equipment: air conditioning, all wheel drive, hydraulics, soot filter, Hako Citymaster 1600 as Winter Service Vehicle - From 1st owner = ex-municipal/authority vehicle - Major engine service including timing belt, water pump, oil, oil filter, fuel filter will be carried out free of charge before sale - Machine configuration with new drive pedal system - 2,293 working hours - 3,979 total operating hours - 22,348 kilometers - Including Kif front brush type CM 1600, 1,300 mm wide, year 2019 (as new/never used in snow) - Including Gmeiner salt spreader type Husky 500V FS, year 2019 (excellent condition/used twice for testing) - 4×4 all-wheel drive – hydrostatic all-wheel drive system - Rear-view camera - Wheelbase 1,600 mm - Track width 1,055 mm - Freshwater tank 180 liters - Unladen weight approx. 1,950 kg - Permissible gross weight 3,500 kg - Dimensions (L x W x H): 4,016 mm x 1,210 mm x 1,970 mm (without attachments) - Driving speed 0–40 km/h - Working speed 0–24 km/h - Noise insulation package - Selectable working speeds 1,600 – 2,400 rpm (ECO/Standard/MAX) - Engine: water-cooled 4-cylinder VW industrial diesel engine Psdex Dlb Sepfx Aa Eorf - Low emissions Euro 5 - Fuel tank approx. 60 liters - Hydrostatic all-wheel drive - 2-circuit high-pressure hydraulics: Circuit 1 (front) 0–50/0–70 l/min 225 bar, Circuit 2 (rear) 0–20/25/30 l/min 195 bar - Hydraulic service brake operated via foot pedal - Cab with air-suspended driver’s seat - Air conditioning / heating - Water treatment system - Hydrant connection - Dosing system - Permissible gross weight: 3,500 kg - Unladen weight: 1,950 kg - The spreader is powered and operated by the vehicle’s hydraulic system. - Other uses possible thanks to additional HAKO attachment variants such as sweeping brush, snowplough, and lawnmower (not included) - Subject to errors, changes, and prior sale. Sale is exclusively under our general terms and conditions with exclusion of any warranty. Errors, changes, and prior sale reserved. We are available Monday – Friday from 9:00 to 17:00 without interruption, Saturday by appointment. Outside of these hours, telephone appointments are possible. We are happy to accept your used device/vehicle as part payment. Sales to commercial customers and exporters are given preference; this applies to our entire vehicle inventory. The above information is non-binding; errors, changes and prior sale reserved!

Condition: ready for operation (used), operating hours: 3,979 h, functionality: fully functional, mileage: 22,348 km, power: 55 kW (74.78 HP), first registration: 04/2018, overall weight: 3,500 kg, fuel type: diesel, color: white, axle configuration: 4x4, empty load weight: 1,950 kg, next inspection (TÜV): 05/2026, fuel: diesel, wheelbase: 1,600 mm, driver cabin: other, gearing type: hydrostat, emission class: euro5, Equipment: air conditioning, all wheel drive, hydraulics, soot filter, Hako Citymaster 1600 as winter service vehicle Single ownership – ex-municipal / government vehicle A full engine inspection including timing belt, water pump, oil, oil filter, and fuel filter will be carried out free of charge before sale. Machine specification includes the new drive pedal system 2,293 hydraulic hours 3,979 total operating hours 22,348 kilometers Including Kif front brush, type CM 1600, 1,300 mm wide, year 2019 (as new/never used in snow) Including Gmeiner salt spreader, type Husky 500V FS, year 2019 (as new/only tested twice) 4×4 all-wheel drive – hydrostatic all-wheel drive system Reversing camera Wheelbase: 1,600 mm Track width: 1,055 mm Podex Dlahepfx Aa Esrf Fresh water tank: 180 liters Unladen weight approx. 1,950 kg Permissible total weight: 3,500 kg Dimensions (L×W×H): 4,016 mm × 1,210 mm × 1,970 mm (without attachments) Driving speed: 0–40 km/h Working speed: 0–24 km/h Noise insulation package Selectable working speeds: 1,600–2,400 rpm (ECO/Standard/MAX) Engine: water-cooled 4-cylinder VW industrial diesel engine Low-emission Euro 5 Fuel tank approx. 60 liters Hydrostatic all-wheel drive 2-circuit high-pressure hydraulics Circuit 1 (front): 0–50/0–70 l/min at 225 bar Circuit 2 (rear): 0–20/25/30 l/min at 195 bar Hydraulic service brake via foot pedal Cabin with air-suspended driver’s seat Air conditioning / heating Water treatment system Hydrant connection Dosing system Permissible total weight: 3,500 kg Unladen weight: 1,950 kg The spreader is powered and operated via the vehicle’s hydraulics. Other application options available with additional Hako attachments such as sweeping brushes, snow blades, and mowers (not included in scope of supply). Errors, changes, and prior sale excepted. We sell exclusively under our Terms and Conditions and exclude any form of warranty. Errors, changes, and prior sale excepted. We are available Monday to Friday from 9:00 am to 5:00 pm; Saturdays by appointment. Outside these hours, appointments may be made by phone. We are happy to accept your current used machine/vehicle as a trade-in. Sales to commercial operators and exporters are given preference – applies to our entire vehicle inventory. All details are subject to change without notice. Errors, changes, and prior sale excepted.

Condition: used, functionality: fully functional, mileage: 23,640 km, power: 52 kW (70.70 HP), first registration: 07/2013, overall weight: 2,000 kg, fuel type: gasoline, color: white, axle configuration: 4x2, maximum load weight: 830 kg, empty load weight: 1,170 kg, next inspection (TÜV): 12/2027, driver cabin: other, gearing type: mechanical, emission class: euro5, suspension: steel, loading space width: 1,400 mm, loading space length: 1,900 mm, loading space height: 600 mm, number of seats: 2, number of previous owners: 1, Equipment: ABS, power assisted steering, truck registration, Piaggio Porter / Pfau Unijet Tipper 1.3 From 1st owner – former municipal / authority vehicle Low emissions Euro 4 Green environmental badge Power steering Winter service equipment Hydraulically adjustable snow plough Attachable salt spreader Pjdpfsx Diucex Aa Esrf XL driver’s cabin Raised side panels Raised front panel Yellow rotating beacon Lashing points on loading area Former city service vehicle Vehicle is in unprepared condition. Payload: 830 kg Unladen weight: 1,170 kg Permissible total weight: 2,000 kg Load area dimensions in mm: L: 1900 W: 1400 H: 600 Subject to errors, changes, and prior sale We sell exclusively according to our General Terms and Conditions and under exclusion of any warranty. Subject to errors, changes, and prior sale. We are available Monday to Friday continuously from 9:00 a.m. to 5:00 p.m., Saturday by appointment, outside of these hours phone appointments are possible. We are happy to accept your used equipment/vehicle as a trade-in. Priority is given to sales to businesses and exporters; this applies to our entire vehicle inventory. The information provided above is non-binding, subject to errors, changes, and prior sale!

Condition: used, functionality: fully functional, mileage: 23,640 km, power: 52 kW (70.70 HP), first registration: 07/2013, overall weight: 2,000 kg, fuel type: gasoline, color: white, axle configuration: 4x2, maximum load weight: 830 kg, empty load weight: 1,170 kg, next inspection (TÜV): 12/2027, driver cabin: other, gearing type: mechanical, emission class: euro5, suspension: steel, loading space width: 1,400 mm, loading space length: 1,900 mm, loading space height: 600 mm, number of seats: 2, number of previous owners: 1, Equipment: ABS, power assisted steering, truck registration, Piaggio Porter / Pfau Unijet Tipper 1.3 From 1st owner = former municipal / government vehicle Low-emission Euro 4 Green environmental badge Power steering Winter service equipment Hydraulically adjustable snow plough Mounted salt spreader XL driver’s cab Raised side panels Raised front wall Yellow beacon Lashing points on the loading area Former city vehicle Vehicle is in unprepared/unrefurbished condition. Payload: 830 kg Unladen weight: 1,170 kg Gross vehicle weight: 2,000 kg Loading area dimensions in mm: L: 1,900 | W: 1,400 | H: 600 Errors, changes and prior sale excepted. We sell exclusively according to our terms and conditions and under exclusion of any warranty. Errors, changes, and prior sale excepted. We are available Monday – Friday from 9:00 to 17:00 non-stop, Saturday by appointment; outside these hours, telephone appointments can be arranged. We will gladly accept your used machine/vehicle as part exchange. Sales to traders and exporters are given preference. This applies to our entire vehicle stock. The above information is non-binding. Errors/changes and prior sale excepted. Pjdpfx Asx Ditxsa Eorf

Condition: used, functionality: fully functional, mileage: 23,640 km, power: 52 kW (70.70 HP), first registration: 07/2013, fuel type: gasoline, empty load weight: 1,170 kg, maximum load weight: 830 kg, overall weight: 2,000 kg, axle configuration: 4x2, next inspection (TÜV): 12/2027, color: white, driver cabin: other, gearing type: mechanical, emission class: euro5, suspension: steel, number of seats: 2, loading space length: 1,900 mm, loading space width: 1,400 mm, loading space height: 600 mm, number of previous owners: 1, Equipment: ABS, power assisted steering, truck registration, Piaggio Porter / Pfau Unijet Tipper 1.3 From 1st owner – former municipal / authority vehicle Low emissions Euro 4 Prodpfxex Ditrs Aa Esf Green environmental badge Power steering Winter service equipment Hydraulically adjustable snow plough Attachable salt spreader XL driver’s cabin Raised side panels Raised front panel Yellow rotating beacon Lashing points on loading area Former city service vehicle Vehicle is in unprepared condition. Payload: 830 kg Unladen weight: 1,170 kg Permissible total weight: 2,000 kg Load area dimensions in mm: L: 1900 W: 1400 H: 600 Subject to errors, changes, and prior sale We sell exclusively according to our General Terms and Conditions and under exclusion of any warranty. Subject to errors, changes, and prior sale. We are available Monday to Friday continuously from 9:00 a.m. to 5:00 p.m., Saturday by appointment, outside of these hours phone appointments are possible. We are happy to accept your used equipment/vehicle as a trade-in. Priority is given to sales to businesses and exporters; this applies to our entire vehicle inventory. The information provided above is non-binding, subject to errors, changes, and prior sale!