Used Run Winch for sale (7,738)

Year of construction: 2007, condition: good (used), functionality: fully functional, We are offering four original HOLTEC V-roller conveyors from a dismantled unit. Rjdsyyluyepfx Acver Feed rate 50-150 m/min. Diameter 8-80 cm Log lengths: 2.4-6.1 m

Condition: used, Year of construction: 2015, Format: 0x0 Rodpfxoyxqxns Acver

Year of construction: 2009, condition: good (used), GRUNWALD HITTPAC AKH-059/2 Item: GRUNWALD Hittpac AKH-059/2 Grunwald-Cup Filling Machine diverse, margarine, sous, butter, cheese etc.. Grunwald Rotary cup filling machine with 2 heads, for round cups Year of production: 2009 For hot fill of liquid products including cup lifting device servo driven and hopper with scraper agitator and feed valves (CIP cleanable), aluminum seal dispensing by vacuum and tip sealing, heat sealing of aluminum seal, snap-on cover station and out feed. Stainless steel control panel, hanging on the machine with servo controller (make: Elau) and touchscreen operator panel. Machine has polycarbonate glass safety guards. Documentation (instruction, parts manual and electric scheme) in German available Redpfxel D T D To Acver CEE machine, incl. complete documentation

Year of construction: 2023, operating hours: 2 h, condition: new, functionality: fully functional, For sale is an as-new spiral cooling tower made of stainless steel 304. As a precautionary measure, the basket was completely shot-blasted, and every single stainless steel component was pickled and then hand-polished. All screws and nuts have been replaced with new ones, all shafts have been replaced with stainless steel, and all ball bearings have also been replaced with stainless steel deep groove ball bearings. Replacement motors (drive for the basket and for the modular belt), as well as approximately 20 meters of modular belt, are included as spares. Total modular belt width: approx. 340 mm, blue area width approx. 280 mm, outer side areas on the right and left made of stainless steel. Total belt length: 100 m. Number of tiers: 9. Spacing between each tier: 105 mm. Overall tower height: 2060 mm. Redpfxsyvrvpe Acvjr Overall length incl. discharge belt: approx. 4000 mm; discharge section: approx. 2000 mm; total width: 2235 mm; running surface inner width: 370 mm; running surface outer width: 465 mm. Modular belt is made of stainless steel and POM. This spiral cooling tower also comes with a Z-belt. The Z-belt shown is for reference only and is not the original.

Condition: used, GRUNDIG STEUERUNGSEINH. STE02 9.44209-1201 Rjdpfx Aeymqvujcvor

Year of construction: 2014, condition: good (used), High-quality air pad machine from a renowned manufacturer. Suitable for producing individually defined air-filled protective and filling elements made of PA and PE film as well as air cushions made of paper. Four air cushions are usually produced per work cycle. Various formats can be produced. 10 programs are available for storing several parameters. By calling up the corresponding program on the display, air cushions from 4 cm to 16 cm in length and with an individually defined degree of filling can be produced. The air cushion webs created in this way are wound into rolls using a motorized device. When the roll is full, the machine switches off automatically. The finished roll can then be removed manually and subsequently used as packaging material. The machine can be pushed using rollers and secured using brakes. The machine can be demonstrated with power. Rjdokkcqqopfx Acver

Condition: new, We offer all types of spare parts for your conventional or CNC Karstens/GP cylindrical grinding machine, including components for your tailstock, workpiece spindle head, grinding spindle head, ball screws, glass scales, grinding wheel flanges, drive motors, axis drives (BOSCH SIEMENS), bellows, bearings, K11/K21 infeed control systems—new and used—as well as reversing blocks for the Z axis on an exchange basis. Also suitable for similar Weiss/EMAG/GP cylindrical grinding machines, Studer, Kellenberger, Schaudt, Tschudin, Tacchella, Dannobat, Bahmüller, Fortuna. Redoraibvspfx Acver

Condition: new, We offer you spare parts of all kinds for your conventional or CNC Karstens / EMAG WEISS / GP cylindrical grinding machine—covering your tailstock, workpiece headstock, grinding spindle headstock, ball screw spindles, glass scales, grinding wheel flanges, drive motors, axis drives (BOSCH SIEMENS), ECKELMANN controls, bellows, bearings, K11/K21 infeed controls (new and used), as well as Z-axis reversing blocks for exchange. We service machines from year of manufacture 1955 onwards: ASA-ASE-K10-K11-K12-K13-K16-K19-K21-K22-K23-K24-K25-K26-K27-K28- K29-K33-K35-K37-K50-K51-K52-K53-K57-W11-W21-GP cylindrical grinding machines—all assemblies based on Karstens design. Rjdoup Aikjpfx Acver Comparable/ EMAG-WEISS/ GP cylindrical grinding machines/ Studer/ Kellenberger/ Schaudt/ Tschudin/ Tacchella/ Dannobat.

Condition: good (used), Year of construction: 1970, Transformer, transformer, converter, three-phase autotransformer, isolating transformer, 3-phase transformer -PCB containing insulating liquid exchanged in 1998 -Input: 6000V -Output: 400V -Power: 200kVA -Type: LT Rodpfsb Iqgnex Acvjr -(for technical data see photos) -Dimensions: approx. 1300/800/H1600 mm -Weight: about 1000 kg

Condition: excellent (used), I am offering a professional industrial extraction unit / industrial vacuum cleaner from the renowned German brand AL-KO, model POWER UNIT APU 100. This unit is designed for extracting dust and contaminants in an industrial environment – ideal for workshops, carpentries, and manufacturing plants. The equipment is in very good technical condition and ready for immediate use. Rjdpfx Asyxtf Rjcvsr ⚙️ Technical Specifications - Manufacturer: AL-KO (Germany) - Model: POWER UNIT APU 100 - Year of manufacture: 2021 - Power supply: 400V / 50Hz (3-phase) - Motor power: 1.5 kW - Airflow: approx. 865 m³/h - Negative pressure: 2124 Pa - Connection diameter: 100 mm - Speed: 2896 rpm - Protection class: IP54 - Weight: approx. 116 kg ✅ Technical Condition - Complete device - Fully functional, ready for operation - Very good visual condition - No mechanical damage - Used – normal signs of use 📦 Included in the set - AL-KO POWER UNIT APU 100 extraction unit - Complete set as shown in the photos - Documentation (user manual) 🏭 Typical Applications - Carpentry workshops and wood processing plants - Production and workshop environments - Dust and chip extraction - Dust extraction systems

Year of construction: 2007, condition: used, Pulsed plasma nitriding system, manufacturer PLATEG Plasma Technik Grün, type PulsPlasma PP 800, 2000 x 2900, mono with tandem preparation, system no. A 5811, with 1 plasma generator, type PP 800/160, no. AN 7491, year of manufacture 2006/2007, 600 V output voltage, 800 A pulse current, 480 kVA pulsed power, 190 kW connected load, process control type Stange 510, stainless steel vacuum chamber Ø 2000 mm (usable volume 1800 mm), height 2900 mm (usable height 2200 mm), wall thickness 10 mm, batch weight 7,500 kg, process temperature max. 600°C, vacuum pump by Leybold, 13 kW, 2,000 m³/h, DN 160, with pressure sensor and manometer, gas supply, cooling water supply with internal recirculator, overall dimensions: 7,840 mm x 3,470 mm x approx. 7,400 mm height, with control cabinet including 2 cooling units. Rodpfoyazhzex Acvjr

Year of construction: 2008, condition: excellent (used), machine/vehicle number: WK43/07, Product number: 2535 Type: Foodliner 12000/8 Serial number: WK43/07 Year of construction: 2008 Capacity: 18000 - 22000 cups/hr Rsdpfx Aceikvlmjvjr Cups: round Ø 55 mm, round Ø 65 mm Seal: aluminium Compressed air: 6 Bar, 800 l/min. Water: 3 Bar, 1.5 l/min. Power: 3 x 400V, 50Hz, 15kW Dimensions: 4250 x 2000 x 1800 mm Weight: 3500 kg Including Alpha Machine Vision Solution lid inspection system Including tool trolley

Condition: good (used), Grundfos NBE50125135 Centrifugal pump Rsdpfex R U Hysx Acver Non self priming, single stage, centrifugal pumps, with frequency converter and PI controller in the mot terminal box, this enables continuously variable control of the motor speed, 2 in stock

Condition: good (used), Grundfos PNSNA96513352 Centrifugal pump Redpfxex R U E As Acvjr Vertical, multistage centrifugal pump with inlet and outlet ports on same the level (inline). see plate for full spec, 2 in stock

Condition: new, Circular saw blade diameter 300 mm Bore 40 mm thickness 3 mm Number of teeth 180 Pitch circle driver bore 63 mm diameter driving hole 11mm HSS Rsdomxi T Aepfx Acvsr unused ,from magazine liquidation bearing number 28418

Year of construction: 1993, condition: good (used), For sale from stock location: Albert-Proeller-Straße 9a, 86675 Buchdorf Deburring Drum K20 (Year of manufacture: 1993) • Manufacturer: Bruno Kraft • Model: K20 • Machine Type: Deburring Drum / Vibratory Finishing Drum • Year of Manufacture: 1993 • Application Areas: Deburring, edge rounding, descaling, removal of scale, surface improvement of small workpieces Technical Data Rodpfx Aeyr I Npjcvjr Drum • Drum volume: approx. 20 l • Drum diameter: approx. 400–450 mm • Drum width: approx. 250–300 mm • Drum material: steel, internally rubber-lined or PU-coated • Lid: bolted, with gasket Drive • Motor power: 0.25–0.55 kW (typical for K20 series) • Speed: approx. 30–60 rpm • Type of drive: direct or belt drive (depending on year of manufacture) Processing Parameters • Max. workpiece size: approx. 80–120 mm • Typical fill quantity: 10–15 kg of media plus workpieces • Suitable media: ceramic, plastic, porcelain, steel media • Processing operations: o Deburring o Edge rounding o Descaling o Removal of scale Dimensions and Weight • Length: approx. 700–900 mm • Width: approx. 500–600 mm • Height: approx. 700–900 mm • Weight: approx. 80–120 kg

Condition: new, functionality: fully functional, volume flow: 64 m³/h, power: 5.5 kW (7.48 HP), rotational speed (max.): 2,900 rpm, We offer this new Grundfos CR 64-1 centrifugal pump, never used, new on pallet. Q = 64 m³/h H = 21.1 m DN 100 suction and discharge Redpfxsynwy Ns Acvjr 5.5 kW If you have any questions or require more information, please feel free to send us a message or call us.

Condition: used, We offer this used Grundfos vertical multistage pump, model PN-SN A-96501895-10064306. Year of manufacture not specified. Brand: Grundfos Rsdpfxsyxwc He Acvor Model: PN-SN A-96501895-10064306 If you have any questions or require further information, please do not hesitate to send us a message or call us.

Condition: excellent (used), For sale: Industrial pump from the renowned manufacturer Grundfos. Model SPK 4-8 – vertical multistage pump designed for clean liquids, coolants, industrial installations, and CNC machines. Technical data: Manufacturer: Grundfos Model: SPK 4-8 A-A-A Power: 0.55 kW Speed: 2850 rpm Capacity: approx. 3 m³/h Head: up to 28 m Liquid temperature: max 90°C Country of manufacture: Denmark Redpfxeywpahs Acvjr Condition: Used, fully functional. Visible signs of use (abrasions, minor corrosion – see photos). A crack is visible near the nozzle on the casing – does not affect operation (buyer to verify).

Condition: not inspected (used), functionality: unexamined, No minimum price – guaranteed sale to the highest bidder! Placing a bid obligates you to collect on time, either between 11.05.2026 and 13.05.2026 or between 18.05.2026 and 21.05.2026! TECHNICAL DETAILS Contents: Various boring tools (manufacturer: EPPINGER) Thread cutting heads Arbor press (diameter: approx. 180 mm) MACHINE DETAILS Rsdpfx Aeyn Eg Decver Dimensions & Weight Dimensions (L x W x H): 1550 x 800 x 1500 mm Weight: 450 kg External reference: Pieper - Lot 63

Condition: good (used), Year of construction: 2014, center height: 180 mm, center width: 600 mm, grinding diameter: 260 mm, Sinumerik 840D sl cnc control tail stock measuring device diamant roll portal loading device Technische Daten / technical details: Spitzenweite / center to center 600 mm Spitzenhöhe / center height 180 mm max. Schleifdurchmesser / max. grinding diameter 260 mm Schleifscheibenmaß / grinding wheel dimension 600x80x304,8 mm Reitstock / tail stock MK4 Redpfx Asvygwwscvjr Antriebsleistung Schleifspindel / drive capacity grinding wheel 12 kW Gewicht der Maschine / weight 7500 kg Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich - Technical data, accessories and description of the machine are not binding.

Year of construction: 2012, condition: ready for operation (used), functionality: fully functional, A complete cooling water unit that was used for cooling screw compressors. Pump unit with machine frame, consisting of: - 3 x Grundfos CRNE45-2-2 A-F-G-V-HQQV centrifugal pumps (Year of manufacture: 2012) Q = 45 m³/h, H = 30.6 m, P2 = 5.5 kW - 6 x manual stainless steel shut-off butterfly valves DN 80 - 3 x basket strainers DN 80 - 3 x check valves DN 80 - 1 x pressure relief valve - 2 x Rosemount GP6 S22 C1 pressure transmitters - 6 x stainless steel gauges Cl. 1 - 1 x GRP pipe - 1 x mounting frame Dimensions: Length: 2400 mm Width: 2000 mm Height: 1400 mm Weight: 780 kg Rsdpfx Aoywuihscvjr Heat exchanger unit with frame, consisting of: - 2 x bolted plate heat exchangers, Funke Apparatebau GmbH (Year of manufacture: 2001) Type: FPS 21-100-1-E Volume: 29.2 / 29.8 liters Max. operating pressure: 10 bar Max. temperature: 80°C - 8 x manual intermediate flange shut-off butterfly valves, stainless steel - 1 x KSB BOA electric valve with Auma SAR actuator and MATIC head, including Harting connector - 2 x PT 100 sensors - 6 x analog thermometers, stainless steel Cl. 1 - 2 x PE pipework with bends 110x65mm Gerodur - 1 x expansion vessel - 1 x mounting frame Dimensions: Length: 2200 mm Width: 2000 mm Height: 2000 mm Weight: 1500 kg

Condition: good (used), Item: D-1915 Grundfos Pump Rodpfxeppxy Ej Acvjr PUMP, GRUNDFOS Type TP-32-120/2 Bar/C - 10/90 Q - 9.0 m3/h H - 7.1 m n 2890 min Hz 50 More information at attached photos.

Condition: used, Year of construction: 2012, Air Cushion Machine Fromm Airpad Machine Redswulylopfx Acver Manufacturer: Brüninghaus Model: AP 502 Year of manufacture: approx. 2012 Film material: PA/PE composite film or polyethylene film (100% recyclable) Compressed air connection: NW 10/4 - 8 bar; max. 82 Nl/min (during cushion production): max. 3.5 Nl/cycle Performance: 25 – 49 cycles/min (depending on film type and cushion size) Electrical connection: 230 VAC; 50/60 Hz; 16 A; 2.0 kVA Dimensions (LxWxH): 1,600 x 767 x 1,292 mm Weight: 230 kg Accessories / Special equipment: • Stored programs for various cushion sizes • Program change at the press of a button • Individual production from 4 cm to 16 cm length with defined filling degree • 10 programs available for storing multiple parameters

Condition: used, Vertical multistage high pressure centrifugal pump GRUNDFOS. Pump as good as new, but a part of the magnetic coupling has been dismantled. Type CRN 10-09 MP-FGJ GI-V Year of manufacture approx. 2012 Delivery capacity at 7,2 bar: max. 10 m3/h Delivery head: max. 91.8 meters Mains connection: 400 Volt, 50 Hz Power: 3 kW - pump construction in 9 stages - made of stainless steel 1.4401 - the pump is as good as new, but there are several new pump chambers included - part of the magnetic coupling is missing suitable for drinking water supply, irrigation and drainage Packed in the original wooden box space requirement pump LxWxH 1100 x 250 x 300 mm Space requirement shipping box LxWxH 1400 x 330 x 340 mm Rodpfxofupadj Acver Weight with shipping box 85 kg As good as new No submersible pump or submersible pump