Used Room Electromedicine for sale (2,078)

Condition: new, Year of construction: 2025, functionality: fully functional, Our SAPI Blasting Halls SAPI sandblasting halls and systems with 50 years of tradition and proven quality. Sandblasting halls are designed for industrial and commercial use, providing a safe environment for all types of blasting work. They include a blasting room, an abrasive recovery system with a filter and dust extraction system, lighting, and safety features to ensure the safety of the operator. Recovery System Our recovery system collects, separates, and reuses the abrasive material, which reduces costs and environmental impact. Ventilation and filtration systems ensure that the air in the hall remains clean. Adequate lighting ensures optimal visibility for the operator. Kedpfx Aeun R N Aea Eefa Key Components of Our SAPI Sandblasting Halls: ✅ Blasting Room: The central area where the actual sandblasting takes place. 🌬️ Ventilation and Filtration Systems: Reduce dust levels and ensure optimal visibility. 🔄 SAPI Recovery System: Recycles the abrasive material and reduces costs and environmental impact. 💡 Lighting: Ensures optimal visibility for safe operation. 🦺 Safety Features: Emergency shutdown, fire protection, and protective gear like helmets, overalls, and gloves. ⚙️ Control Panel: The control center that integrates all electrical components. 🗑️ Dust Collection Container: Collects fine abrasive material for easy disposal. 🛠️ Compressor: Powerful compressor for the compressed air supply. 💪 Mammut Sandblasting System: Designed for tough industrial use. Reasons to Choose Our Sandblasting Halls: ✅ High Efficiency: Increases productivity and reduces operating costs. 🛡️ Safe and Clean Environment: Minimizes environmental impact and ensures a safe working environment. ⚙️ Customizable Solutions: Tailored solutions for optimal performance. 🔧 High-Quality Components: Durable components that reduce maintenance needs. 🛠️ Support and Service: Expert support for quick problem-solving. 🌱 Environmental Responsibility: Reduces waste and environmental impact. The SAPI Flat Conveyor System: The abrasive material is processed by our efficient abrasive cleaner, which separates contaminants. The system is low-maintenance, operates without interruption, and consumes very little energy. It is easy to retrofit and can be installed on existing hall floors with minimal foundation work. Advantages of Our Flat Conveyor System: ✅ Low installation depth, retrofit-compatible with existing blasting rooms 🔇 Low noise and friction ⚡ Very low energy consumption 🏗️ Very low wear, as only rubber is used 🚧 Very low installation height

Condition: excellent (used), Year of construction: 2013, operating hours: 20,900 h, functionality: fully functional, overall weight: 4,500 kg, power: 45 kW (61.18 HP), fuel tank capacity: 2,000 l, operating pressure: 10 bar, type of cooling: air, Complete compressor room Atlas Copco GA75VSD, built in 2013, 46,100 hours - 75 kW - Max. 10 bar Dimensions: L225 x W110 x H195 cm Atlas Copco GA45+, built in 2007, 21,000 hours - 45 kW - Max. 10 bar Dimensions: L205 x W100 x H180 cm Atlas Copco FD245, built in 2013, refrigeration dryer Dimensions: W120 x D110 x H100 cm Dimensions: 2000L tank, built in 2016, height 2.85 m Kfsdpfx Aaev Snn Is Eoa Incl. oil-water separator System is currently still in operation; operating hours may vary. System is fully functional and regularly maintained. Maintenance kits and oils are included. Very good condition, see pictures. A forklift is available for loading. Pickup by appointment only in 75053 Gondelsheim. Shipping via freight forwarder is possible; please include your postal code in your inquiry.

Condition: not inspected (used), Year of construction: 2009, functionality: unexamined, machine/vehicle number: 370791, feed length X-axis: 800 mm, feed length Y-axis: 400 mm, feed length Z-axis: 400 mm, spindle speed (max.): 4,500 rpm, table width: 420 mm, table length: 800 mm, No minimum price – guaranteed sale to the highest bidder! Placing a bid obligates you to collect the item on time between 28.07.2025 and 31.07.2025. TECHNICAL DETAILS X-axis travel: 600 mm Y-axis travel: 400 mm Kfodpswvi T Eefx Aa Eja Z-axis travel: 400 mm X-axis feed rate: 2,000 mm/min Y-axis feed rate: 2,000 mm/min Z-axis feed rate: 2,000 mm/min X-axis rapid traverse: 5,000 mm/min Y-axis rapid traverse: 5,000 mm/min Z-axis rapid traverse: 4,000 mm/min SPINDLE Spindle speed: 1 - 4,500 rpm Tool holder: 40 mm Speed range 1: 1 - 1,125 rpm Speed range 2: 1,125 - 4,500 rpm TABLE Table width: 420 mm Table length: 800 mm MACHINE DETAILS Total height: 2,000 mm Total width: 1,750 mm Total length: 1,750 mm Total weight: 1,800 kg Machine weight: 2,025 kg Input frequency: 50 Hz Operating voltage: 400 V Power consumption: 13 kVA EQUIPMENT - The machine vice visible on the table surface is not included in the scope of delivery.

Condition: used, machine/vehicle number: 2806-0743, x-travel:800 mm y-travel:550 mm z-travel:500 mm Kfodpfx Ascxxngja Eea table surface area:(B x T )1000x550 mm spindle turning speed - stepless:0 - 5000 U/min feed speeds - directly programable:2- 6000 mm/min rapid traverse:6,0 m/min quill stroke:80mm mm Tool bore:SK40 total power requirement:12 kW weight of the machine ca.:3,9 t dimensions of the machine ca.:(LxBxH) 2200x2800x2400 mmxmmxmm Deckel FP5 NC Universal Milling Machines - CNC - Swivelable left or right) 90 ° & Tilting Vertical Spilndle Head - Rigid Fixed Table: 1100 x 550 mm (Max. Load 450 kg) - High RPM on Both vertical and Horizontal Spindles - Powerful 9,0 kw AC drives for Main Spindle - Equipped with Electronic handwheel and handheld rapid travel attachement - Dialog 4 - 3D Path Control System. - Seperate Power cabin, Chip tray

Condition: used, 4512-104-72329, 8E Valera, PHILIPS, converter for Philips RF-Room Kfodpfxjukrr Ds Aa Eea Model: 4512-104-72329 Type: 8E Valera Condition: Used

Condition: used, machine/vehicle number: 420285, x-travel:1120 mm Kfedpfx Aocxxm Isa Eja y-travel:420 mm z-travel:620 mm spindle taper:SK 40 spindle speeds:30-2000 1/min table dimension - longitudinal:1600 mm table dimension - cross:400 mm

Condition: used, machine/vehicle number: 1621, x-travel:800 mm y-travel:300 mm z-travel:400 mm Kjdpfxsh Ra Nqe Aa Ejfa table-size:1000 x 440 mm Tool taper:SK40 spindle speeds:40 - 2000 U/min speed steps work spindle:18 spindle speed max.:( 6000 Possible by interchanging the Belt U/min feed range:10 - 500 mm/min feed steps:18 total power requirement:3 kW weight of the machine ca.:2,1 t dimensions of the machine ca.:1600x1550x1930 m The models FP3L has a tilting Spilndle Head can be swiveled 90° left or right direction for vertical and horizontal machining application. - With Rigid Angular Table: 1000 x 440 mm (6 nos of "T-Slots" with of 12mm width) - With 2 Step Dial Configaration for Quick changing on Speed and Auto Feed - Quick Lever for rapid traverse movement on all axis - Universal Table , Separate power cabinet, and Chip tray

Condition: used, Year of construction: 1980, x-travel:500 mm y-travel:500 mm z-travel:400 mm turning speed range:30 - 2240 U/min feeds -stepless-:1 - 750 mm/min rapid traverse:1500 mm/min table surface area:400 x 800 mm tool taper:SK 40 total power requirement:7,8 kW Ksdpfx Aecxxq Doa Eefa weight of the machine ca.:1.8 t dimensions of the machine ca.:2,1 x 1,6 x 2,2 m

Condition: used, Year of construction: 1971, x-travel:450 mm y-travel:320 mm Kfodpfx Aaoiv Tf Ho Eja z-travel:450 mm table-size:950 x 300 mm spindle turning speed range:39-2320 U/min spindle taper:SK 40 power capacity - milling spindle:2,5 kW total power requirement:2,8 kW weight of the machine ca.:1,3 t dimensions of the machine ca.:1,4 x 1,3 x 1,8 m with vertical head, spindle quill, swivelling horizontal spindle, variable adjustable feed for all 3 axes, coolant device, machine light, chip pan, emergency cut-off

Condition: used, Year of construction: 1973, x-travel:815 mm y-travel:400 mm z-travel:410 mm quill stroke:130 mm turning speed range - stepless:67 - 2300 U/min :8 feed speeds:0,04 - 0,08 - 0,15 mm/min feeds of table:15 - 230 mm/min table surface area:1120 x 255 mm T-Slots:3 mm T-slot - width:16 mm T-slot - distance:63 mm Kedpfx Aasvimrme Eefa distance spindle - column:260 mm ram adjustment:315 mm main drive motor:1,5 kW weight of the machine ca.:1,0 t dimensions of the machine ca.:1,75 x 1,80 x 2,10 m

Condition: used, Year of construction: 2003, x-travel:930 mm y-travel:400 mm z-travel:406 mm turning speeds:9-6750 1/min table::1370 x 254 quill stroke:127 mm quill feed:(3) 0,04; 0,08; 0,15 mm/U bore capacity in steel:32 mm feed range:19 - 890 (x) mm/min Kfsdpfxst U Rm Io Aa Eja spindle cone:SK 40 column arm:200 - 680 mm total power requirement:4 kVA weight of the machine ca.:1,15 t dimensions of the machine ca.:1,5 x 1,45 x 2,2 m 3-axis RSF-electronic Z503 digital display, swivelling vertical head +/- 90°, all 3 axes with Feeds, spindle quill (60 mm), switchable spindle brake, coolant system, bore-feed 0.03; 0.12; 0.06 mm/rev. machine light, angled table, extensive accessories (counter bearing, milling spindles with distance rings, tool holders etc.)

Condition: used, Year of construction: 2003, x-travel:760 mm y-travel:290 mm z-travel:370 mm turning speeds:60 - 4200 U/min table::750 x 230 quill stroke:127 mm quill feed:(3) 0,04; 0,08; 0,13 mm/U feed range:19 - 890 (x) mm/min spindle cone:SK 30 column arm:171 - 476 mm Kfodpfst U Rm Usx Aa Eea total power requirement:2,4 kVA weight of the machine ca.:0,95 t dimensions of the machine ca.:2,05 x 1,63 x 2,07 m 3-axis RSF-electronic Z503 digital display, swivelling vertical head +/- 90°, all 3 axes with Feeds, spindle quill (60 mm), switchable spindle brake, coolant system, bore-feed 0.03; 0.12; 0.06 mm/rev. machine light, angled table, extensive accessories (counter bearing, milling spindles with distance rings, tool holders etc.)

Condition: used, machine/vehicle number: 28670, x-travel:ca. 400 mm y-travel:150 mm z-travel:340 mm surface area:600 x 210 mm T-slots:4 Kodocxxliepfx Aa Ejfa T - slots - width:12 mm spindle speeds::20 - 2000 U/min turning speed range - vertical:60 - 1200 U/min turning speed range - horizontal:95 - 1900 U/min speed steps work spindle:12 feed range:10 - 500 mm/min feed steps:10 spindle taper:MK 4 quill stroke vertical:60 mm total power requirement:1,7 kW weight of the machine ca.:0,8 t dimensions of the machine ca.:0,9 x 1,05 x 1,55 m This Deckel FP1 Universal Milling Machine - The Vertical Spindle Swivelable left or right (90*) - With 600 mm Broad Table - Two-step dials for speed and feed control for Quick Change. - Quick Lever for Rapid feed traverse - Vertical quill - 60mm, NK-40 / SK-40

Condition: used, Year of construction: 1985, machine/vehicle number: 2204 - 0469, x-travel:580 mm y-travel:400 mm z-travel:450 (390*) mm table-size:460 x 800 mm spindle speeds:40 - 4000 U/min feed range:2 - 3600 mm/min feed:4.0 m/min spindle taper:SK 40 dimensions of the machine ca.:3,0 x 2,10 x 2,10 m spindle motor:4,0 kW Kfedpfscxxwajx Aa Esa control:Contour 2 The Deckel FP4 A Universal Milling Machine - CNC - Spilndle Head can be swiveled 90 ° (Right or left) - Angular Fixed Work Table: 800 x 460 mm - Hydralic Tool clamping system SK40 with Pull studs DIN 2080 or DIN 69872 - Portable Handheld operating unit for easy control of machine - 4.0 kw Motor for Main Spindle. - Central Lubrication and Coolant system, Seperate Power cabin - Chip tray with Splash protection offering More clean and safe working envoirnment.

Condition: used, machine/vehicle number: 2880, x-travel:290 mm y-travel:120 mm z-travel:350 mm table surface area:690 x 175 mm spindle taper:SK40 turning speeds steps:17 feed range:42 - 680 mm/min feed steps:14 turning speed range:50 - 2240 U/min Kfodpfxecxxntj Aa Eoa weight of the machine ca.:0,6 t with swivelling vertical head +/- 90°, double-pole switchable, reversing spindle drive, vernier hand wheels on all 3 axes plus fast-adjustment on x-axis with capstan, x-axis with electric feed, feed steps adjustment via change gear, upper rail for horizontal milling, triple cam switch on x-axis for running programs, emergency cut-offs on control panel and main switch

Condition: used, Year of construction: 1986, machine/vehicle number: 2204-0929, x-travel:560 mm y-travel:500 mm z-travel:450 / 390 mm quill stroke:80 mm feed:2 - 3600 mm/min table surface area:800 x 460 mm spindle turning speed range:40 - 4000 U/min spindle taper ISO:ST40 spindle head swivable left - right:+/- 90 ° control:Contour 2 total power requirement:4,0 kW weight of the machine ca.:2,8 t dimensions of the machine ca.:2,0 x 2,5 x 2,2 m The Deckel FP4 A Universal Milling Machine - CNC - Spilndle Head can be swiveled 90 ° (Right or left) Kedpfxscxxris Aa Eefa - Angular Fixed Work Table: 800 x 460 mm - Hydralic Tool clamping system SK40 with Pull studs DIN 2080 or DIN 69872 - Portable Handheld operating unit for easy control of machine - 4.0 kw Motor for Main Spindle. - Central Lubrication and Coolant system, Seperate Power cabin, Chip tray

Condition: used, Year of construction: 1985, machine/vehicle number: 31268, x-travel:850 mm Kjdscxxwgjpfx Aa Eefa y-travel:700 mm z-travel:600 mm quill stroke:115 mm table surface area:900x700 mm spindle turning speed range:30-6000 U/min spindle taper:SK 50 control:Sinumerik 3 M feed speeds:0-6000 mm/min spindle motor:7,5 kW total power requirement:32 kW weight of the machine ca.:6,6 t dimensions of the machine ca.:3,8 x 1,8 x 2,9 m The Deckel FP4 A Universal Milling Machine - CNC - Spilndle Head can be swiveled 90 ° (Right or left) - Rotary Work Table - Hydralic Tool clamping system SK40 with Pull studs DIN 2080 or DIN 69872 - Portable Handheld operating unit for easy control of machine - 7.5 kw Motor for Main Spindle. - Central Lubrication and Coolant system, Seperate Power cabin, Chip tray

Condition: used, machine/vehicle number: 2819-0517, x-travel:300 mm y-travel:300 mm z-travel:400 (340 with Apron) mm surface area:390 x 620 / Chip tray mm turning speeds:40- 2500 U/min feed range:02 - 3600 mm/min rapid feed:4,0 m/min control:Contour 3 - 3D path Control System spindle taper:SK40 quill stroke:60 mm milling-head swivable +/-:90* spindle drive motor:2,0 kW total power requirement:1,6 / 2,0 kW Kedpfx Ajcxxp Tja Eofa weight of the machine ca.:1,3 t dimensions of the machine ca.:1,8 x 1,8 x 1,8 m Deckel FP2A Universal Milling Machine - Spilndle Head can be swiveled 90 °, can be used as vertical and horizontal machining Center. - Rigid Angle Table: 620 x 390 mm (Max. Load 250 kg) - Extendible sleeves: vertically 80 mm, horizontally 60 mm - Hydralic clamping system SK40 with Pull studs DIN 2080 or DIN 69872 Seperate Power Cabin, Central Lubrication and Coolant System, Chip tray and Splash Gaurd

Condition: used, machine/vehicle number: 52326/08, x-travel:250 mm y-travel:150 mm z-travel:305 mm table surface area:600 x 210 mm spindle speeds:40 - 2000 U/min spindle turning speed range:16 spindle taper:SK 40 feed:10 - 500 mm/min feed steps:16 vertical head swivelling:+/- 90 Grad total power requirement:1,0 / 1,4 kW weight of the machine ca.:0,8 t dimensions of the machine ca.:1,0 x 1,25 x 0,85 m This Deckel FP1 Universal Milling Machine Kjdpfxscxxrve Aa Esfa - The Vertical Spindle Swivelable left or right (90*) - With 600 mm Broad Table ( Tilt and Turn ) - Two-step dials for speed and feed control for Quick Change. - Quick Lever for Rapid feed traverse - Vertical quill - 60mm, NK-40 / SK-40 - Seperate power cabin

Condition: used, machine/vehicle number: 2801-0234, x-travel:300 mm y-travel:220 mm z-travel:400 mm surface area:620 x 390 mm turning speeds:31 - 3150 U/min feed range:1 - 3600 mm/min rapid traverse:4000 m/min Kjdpfx Aecxxm Eea Esfa spindle taper:SK 40 milling-head swivable +/-:90° quill stroke:60 mm total power requirement:1,09 / 2,0 / 4,0 kW weight of the machine ca.:1,3 t dimensions of the machine ca.:1,3 x 1,1 x 1,6 cm m Deckel FP2 NC Milling Machines. - Spilndle Head can be swiveled left or Right (90 °) - Angular Fixed Work Table: 620 x 390 mm (Max. Load 250 kg) - Hydralic Tool clamping system SK40 with Pull studs DIN 2080 or DIN 69872 - Electronic handwheel for Easy Axis movement - Deckel Dialog 4 CNC control Systems - Mechanical hand-wheels for all axes to operate manually, Central Lubricant system, Chip tray with Splash cabin

Condition: used, Year of construction: 1989, machine/vehicle number: 6766, x-travel:560 mm Kfjdpocxxpqsfx Aa Eoa y-travel:500 mm z-travel:400 mm table-size:900 x 530 mm control:Heidenhain TNC 355 B/Q tool taper:ISO 40 / M 16 turning speed range:40 - 4000 U/min rapid traverse X-axis:6 m/min rapid traverse Y-axis:6 m/min rapid traverse Z-axis:5 m/min feeds x/y/z -stepless:2 - 3000 mm/min total power requirement:9 kW weight of the machine ca.:2,6 t dimensions of the machine ca.:2,6 x 1,8 x 2,2 m

Condition: used, Year of construction: 1989, machine/vehicle number: 0153, x-travel:400 mm y-travel:300 mm z-travel:400 mm turning speeds:40 - 2000 U/min table::750 x 320 quill stroke:60 mm Kfsdpfecxxvqex Aa Eja thickness of jaw:160 mm feed range:10 - 500 mm/min spindle cone:SK 40 weight of the machine ca.:2 t dimensions of the machine ca.:1,22 x 1,81 x 1,71 m 3-axis RSF-electronic Z503 digital display, swivelling vertical head +/- 90°, all 3 axes with Feeds, spindle quill (60 mm), switchable spindle brake, coolant system, bore-feed 0.03; 0.12; 0.06 mm/rev. machine light, angled table, extensive accessories (counter bearing, milling spindles with distance rings, tool holders etc.)

Condition: used, x-travel:600 mm y-travel:400 mm z-travel:640 mm Kedpfx Aocxxx Tsa Ejfa turning speeds:30 - 1800 U/min table surface area:880 X 495 mm total power requirement:4 kW weight of the machine ca.:2 t dimensions of the machine ca.:2,2 x 1,8 x 2,1 m

Condition: used, machine/vehicle number: 0736, x-travel:800 mm y-travel:300 mm z-travel:400 mm work table::1000 X 440 spindle turning speed range:40 - 2000 RPM/min turning speeds steps:18 feed range:10-500 mm/min feed steps:18 rapid traverse:1,50 m/min inner taper of milling spindel:SK40 total power requirement:2,2 kW weight of the machine ca.:2 t dimensions of the machine ca.:1,57 x 1,68 x 1,85 m Kfedpocxxyhsfx Aa Eoa Deckel FP2 LB Universal Milling Machine - Spilndle Head can be swiveled left or right (90°) - Rigid Angular Table: 1000 x 440 mm - Quick lever for Rapid Feed Travese Seperate Power cabin and has a Chip tray for clean safe working Area.

Condition: used, Year of construction: 1984, x-travel:500 mm y-travel:400 mm z-travel:400 mm table-size:700 x 470 mm spindle turning speed range:40 - 4000 U/min feed range:02 - 3600 mm/min rapid traverse speed:4,0 m/min quill stroke:90 mm spindle taper:SK 40 control:Deckel Dialog 3 power capacity - milling spindle:3 kW total power requirement:22 kW weight of the machine ca.:1,8 t Kedpfxscxxypo Aa Eofa Deckel FP3 NC Universal Milling Machine - CNC - Spilndle Head can be swiveled 90 ° (left or Right) - Work Table: 700 x 470 mm - Hydralic Tool clamping system SK40 with Pull studs DIN 2080 or DIN 69872 - Portable Handheld operating unit for easy control of machine - 3.0 kw Motor for Main Spindle - Deckel Dialog 3 CNC control Systems - Seperate Power Cabin, Central Lubrication and Coolant System and Chip tray with Splash cabin