Used Room Electromedicine for sale (2,146)

Condition: used, Year of construction: 1989, machine/vehicle number: 6766, x-travel:560 mm y-travel:500 mm z-travel:400 mm table-size:900 x 530 mm control:Heidenhain TNC 355 B/Q tool taper:ISO 40 / M 16 turning speed range:40 - 4000 U/min rapid traverse X-axis:6 m/min rapid traverse Y-axis:6 m/min rapid traverse Z-axis:5 m/min Chedpfx Aecxxpqjdxsd feeds x/y/z -stepless:2 - 3000 mm/min total power requirement:9 kW weight of the machine ca.:2,6 t dimensions of the machine ca.:2,6 x 1,8 x 2,2 m

Condition: used, 4512-104-72329, 8E Valera, PHILIPS, converter for Philips RF-Room Model: 4512-104-72329 Type: 8E Valera Condition: Used Cedpfjukrr Dsx Adxehd

Condition: repair required (used), Machine number: 1464 TyP / Model: FUW 250/IV travel x-y-z: 400 - 220 - 400 mm table: 630 x 350 mm table clamping surface: 700 x 300 mm speed range: 45 to 2.240 rpm spindle mounting: SK 40 feed range longitudinal: 6,3 to 1.250 mm/min feed range cross: 6,3 to 1.250 mm/min Connection: 7.4 kW accessories/equipment: vertical head Chodpfxed Hl Stj Adxed Condition: 2 controllers defective Note: machine repair EUR 2.000 weight: 1,45 t dimensions: 1.500 x 1.600 x 1.800 mm

Year of construction: 2025, condition: new, functionality: fully functional, The Blasting room (also called a sandblasting room or shot blasting room) is an enclosed area designed for cleaning, roughening, or surface preparation of materials such as metal, concrete, stone, or wood. Inside the room, abrasive materials (like quartz sand, steel grit, aluminum oxide, or glass beads) are propelled at high speed using compressed air to remove rust, paint, scale, or dirt from the surface and achieve the desired roughness. Main Components of a Sandblasting Room Blasting Chamber / Room: A steel-structured enclosure with wear-resistant lining to protect the interior walls. Blasting Machine (Nozzle System): Mixes compressed air and abrasive media, then directs it toward the workpiece. Dust Collection System (Filter Unit): Csdpfjxr Am Uex Adxehd Removes airborne dust and maintains clean air inside the room. Abrasive Recovery System: Collects used abrasive material, cleans it, and recycles it for reuse. Operator Equipment: The operator wears protective gear, including a helmet with air supply, gloves, and a blast suit. CODE DIMENSIONS OF SANDBLASTING AREA (L x W x H) mm KO - 1 4.000 x 4.000 x 3.000 KO - 2 6.000 x 3.000 x 3.000 KO - 3 6.000 x 5.000 x 5.000 KO - 4 10.000 x 5.000 x 5.000 KO - 5 12.000 x 5.000 x 4.000 KO - 6 15.000 x 5.000 x 5.000 KO - SPECIAL 27.000 x 18.000 x 9.000

Condition: new, Product description: ROOMLINE powder coating booths are designed for paint recycling and prevention of environmental pollution during the powder coating process of large parts. It works on the principle of manual painting of products suspended on a rail or placed on a trolley.It is integrated into manual painting systems. Suitable for bar transfer systems. There are options to bring the products into the cabin with the trolley hanging above or on a bottom trolley. The cabin floor is left as the factory floor according to the demand, or the cabin is placed on a chassis and floor suction is provided. Available in floor, side wall or rear wall suction versions.The front of the cabin is optionally produced with a door or open. Depending on occupational safety and European standards, it can be equipped with equipment such as emergency exit door, fire extinguishing system, camera monitoring, ex-proof lighting and suction system, inverter motors. Cabinet construction consists of sandwich panels and steel structures in various thicknesses according to the project. Attachable Dust Collection Systems: - Jet-Pulse Filter System - Mono Cyclone - Multi Cyclone Advantages: - Easy to Use - Quick Color Change - Easy assembly and disassembly - Cleaner environment Chodoggyigjpfx Adxjd

Condition: good (used), Year of construction: 1992, Travel X/Y/Z: 1000/500/500 mm Control: Heidenhain TNC 415 B Codpfxjtmtvlj Adxehd Spindle: SK 40 Speed range: 0 - 5000 rpm Coolant device Universal milling head Can be swiveled and manually indexed via scale, can be swiveled away for horizontal machining

Condition: used, Year of construction: 1989, machine/vehicle number: 0153, x-travel:400 mm y-travel:300 mm z-travel:400 mm turning speeds:40 - 2000 U/min Chodpfx Ajcxxvqsdxod table::750 x 320 quill stroke:60 mm thickness of jaw:160 mm feed range:10 - 500 mm/min spindle cone:SK 40 weight of the machine ca.:2 t dimensions of the machine ca.:1,22 x 1,81 x 1,71 m 3-axis RSF-electronic Z503 digital display, swivelling vertical head +/- 90°, all 3 axes with Feeds, spindle quill (60 mm), switchable spindle brake, coolant system, bore-feed 0.03; 0.12; 0.06 mm/rev. machine light, angled table, extensive accessories (counter bearing, milling spindles with distance rings, tool holders etc.)

Condition: like new (used), functionality: fully functional, A cold storage room is offered, approximately 6 sq m without a refrigeration unit. Length: 3.9 meters Chedpfjvzk Rwex Adxsd Width: 2.4 meters High: 2.05 meters

Condition: excellent (used), control: Heidenhain Positip 850; tool taper: SK 40; hydr. clamping; stroke: 100 mm; table: 800x480 mm travel: x-600 mm, y-400 mm, z-400 mm rapid motion feed: 63-800 mm/min (18 steps) spindle speed: 63-3150 rpm (18 steps) accessories: Chedpfxelkgvbj Adxsd coolant equipment, collet chuck incl chucks

Year of construction: 2017, condition: good (used), Lillnord Combi Room Cold Storage Chamber - used - year of manufacture: 2017 - freezer storage for 18 trolleys 60 x 80 (minus 18°C) - cold storage chamber for 4–5 trolleys 60 x 80 (plus 6–8°C) - dismantled and stored in warehouse Chodpfx Aow Dc Uxsdxjd - good technical condition - stainless steel exterior panels - painted interior panels - collection from warehouse - price on request

Condition: like new (used), Year of construction: 2022, functionality: fully functional, input voltage: 400 V, total width: 5,950 mm, total length: 9,950 mm, total height: 2,135 mm, cooling capacity: 6.637 kW (9.02 HP), The cold storage unit is 2.5 years old and has barely been used. The original purchase price was over €43,000(!). The original offer with all key data is available. Cold storage unit dimensions: 9950mm x 5950mm x 2135mm. 2 Zanossi container units included. The cold storage has already been dismantled and is ready for transport. Price negotiable! Cjdoupwcrspfx Adxehd

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, CLEANROOM - ISO 8 | Cleanroom requirements ISO Class 8 | ISO Cleanroom Class 8 | Cleanroom classification. Csdpfoq H H Ruex Adxohd In order to achieve an ISO 8 air purity class in a Cleanroom, several levels of air filtration are usually used (e.g. G4 pre-filter, F9 filter, H13 final filter). Air movement in the room is non-unidirectional (there is a mixing of "clean" air supplied to the room with "dirty" air present in the room). Air vents in the ISO 8 room are placed on the walls. The required number of air exchanges per hour will depend on the nature of the activities conducted in the room and the number of personnel present, but the goal could be to provide 10-40 air exchanges/hr. In ISO Class 8, personnel are often present continuously. Employees may be dressed in standard work attire and visitors in a disposable apron. It is recommended to maintain a minimum overpressure of the room relative to the adjacent zone of 5-10 Pa. Requirements for equipment and materials intended for Clean Room with ISO air cleanliness class 8 (maximum average amount of particles released when: number of samples taken = 100; measurement performed in accordance with ISO 14644-14 in a cleanliness class at least one better than the purpose of the device; number of particles/m3) Detailed description in photos. Technical drawings attached to photos. Description of ventilation The purpose of the ventilation installation performed was to achieve the following air parameters in the Clean Room. The installation was made with the GBD PHARMA 2000 system, meeting all the requirements for 'clean rooms' in the highest classes of air purity. Parameters for the installation: a. Air purity - ISO 8. b. Temperature 19-23 st C c. Humidity max 38%. a. To ensure the required purity of the supplied air, an air handling unit manufactured by DOSPEL with a maximum capacity of V= 3500 m3/h [up to 15 air changes per hour] was used. The air handling unit is equipped with pocket filters : pre-filters FK EU5/EC2 and fine filters FK-EU9/EC2. In addition, HEPA 11 filters made by EUFILTER were used in diffusers located in the ceiling. Data sheets in point H6. As a result , with a measured flow rate of 3264 m3/h, an ISO 7 [class "C"] cleanliness class of the room was obtained in the resting state, and thus an ISO 8 [class "D" ] cleanliness class for the working state. b. The temperature range of 19-23 deg C is for the enlarged cooler and chiller to be freely maintained with 25% fresh air. c. In order to achieve in summer conditions with high temperatures of 30 deg C and humidity of 80%, a freon chiller of 31.4 kW and a chiller of 33.5 kW of cooling power were used. The chiller is made by FUJITSU supplied by Klimatherm Gdansk. The room is automatically regulated overpressure in relation to the external pressure - the pressure difference at the door : 15 Pa The automation of ventilation allows for "economical" mode , in which the installation works in a closed circuit and an overpressure of 15 Pa is maintained. Technical data attached to the photos.

Condition: used, x-travel:600 mm Chsdpfocxxx Tsx Adxod y-travel:400 mm z-travel:640 mm turning speeds:30 - 1800 U/min table surface area:880 X 495 mm total power requirement:4 kW weight of the machine ca.:2 t dimensions of the machine ca.:2,2 x 1,8 x 2,1 m

Condition: good (used), Viessmann cooling/freezing chamber Cjdpeiauifsfx Adxohd External dimensions: 5700 x 3000 x 2450 mm Internal dimensions: 5420 x 2700 x 2150 mm Plate thickness: 150 mm Stock status: 1 piece The chamber is easy to assemble Aggregate and cooler included We have many other refrigeration devices. Chillers, compressors, coolers, condensers, chillers, cold rooms, refrigeration and gastronomic furniture as well as machines and devices for restaurants and meat processing. See our other auctions or call us, not everything is machineseeker.

Condition: used, Year of construction: 1995, Technical details: Chedpfsw D Hhpex Adxjd x-travel: 600 mm y-travel: 500 mm z-travel: 450 mm weight of the machine ca.: 3,5 t

Condition: new, 🔹 Quick Description of the 7 Elevators for Sale • Manufacturer: ThyssenKrupp (TK Elevator) • Models: Evolution Blue (L1–L2) and BO61 (L3–L7) • Quantity: 7 passenger elevators L1 – Evolution Blue Chedpfxjw R H Sao Adxjd • 1600 kg, 2.5 m/s, 28 stops, 104 m travel • Machine-room-less, high-capacity L2 – Evolution Blue • 1100 kg, 1.75 m/s, 6 stops, 17 m travel • Compact machine-room-less unit L3–L6 – BO61 (x4 units) • 900 kg each, 3 m/s, 26 stops, 104 m travel • Rope-driven with machine room • High-speed mid-capacity models L7 – BO61 • 900 kg, 3 m/s, 26 stops, 104 m travel • Same system as L3–L6, with slightly different car dimensions ⸻ ✅ In total: • 2 Evolution Blue elevators (1100–1600 kg) • 5 BO61 elevators (900 kg each) • All modern, rope-driven passenger lifts designed for mid/high-rise use.

Condition: used, machine/vehicle number: 0736, x-travel:800 mm y-travel:300 mm z-travel:400 mm work table::1000 X 440 spindle turning speed range:40 - 2000 RPM/min turning speeds steps:18 feed range:10-500 mm/min feed steps:18 rapid traverse:1,50 m/min inner taper of milling spindel:SK40 total power requirement:2,2 kW weight of the machine ca.:2 t dimensions of the machine ca.:1,57 x 1,68 x 1,85 m Deckel FP2 LB Universal Milling Machine - Spilndle Head can be swiveled left or right (90°) - Rigid Angular Table: 1000 x 440 mm - Quick lever for Rapid Feed Travese Seperate Power cabin and has a Chip tray for clean safe working Area. Cedpfx Adocxxyhoxshd

Condition: used, Year of construction: 1984, x-travel:500 mm y-travel:400 mm z-travel:400 mm table-size:700 x 470 mm spindle turning speed range:40 - 4000 U/min feed range:02 - 3600 mm/min rapid traverse speed:4,0 m/min Csdjcxxypopfx Adxjhd quill stroke:90 mm spindle taper:SK 40 control:Deckel Dialog 3 power capacity - milling spindle:3 kW total power requirement:22 kW weight of the machine ca.:1,8 t Deckel FP3 NC Universal Milling Machine - CNC - Spilndle Head can be swiveled 90 ° (left or Right) - Work Table: 700 x 470 mm - Hydralic Tool clamping system SK40 with Pull studs DIN 2080 or DIN 69872 - Portable Handheld operating unit for easy control of machine - 3.0 kw Motor for Main Spindle - Deckel Dialog 3 CNC control Systems - Seperate Power Cabin, Central Lubrication and Coolant System and Chip tray with Splash cabin

Condition: ready for operation (used), Year of construction: 2020, Three room air filtration units CRT RoomGuard are available. Air volume flow: 2000m³/h, pre-filter: F7, main filter: HEPA H14, max. efficiency (aerosols/viruses): 99.9%, machine dimensions X/Y/Z: approx. 1300mm/800mm/700mm, weight: approx. 110kg. Documentation available. An on-site inspection is possible. Chedpfx Adoxl Upbexed

Condition: ready for operation (used), Refurbished, ready to be used. Chodpfowdgvmex Adxsd

Condition: used, Pneumatic chain hoist, crane, indoor crane, assembly crane, air-operated chain hoist, compressed air chain hoist, compressed air chain hoist, pneumatic chain hoist -Manufacturer: BroomWade, pneumatic chain hoist type MLHI10A Csdpfx Aeuu U Trjdxohd -Load capacity: 500 kg -Chain length: 3100 mm -Dimensions: see photos -Transport dimensions: 260/230/H300 mm -Weight: 18 kg

Condition: like new (used), Year of construction: 2022, Trying out solarization in the darkroom Chedpewlcb Uofx Adxed

Condition: new, Product driven flow divider The filling flow divider can be used for several kind of products like meat, fish, pasta products, sauces and salads. Includes 1 nozzle per exit (round, square, triangular or rectangular) with a maximum outer diameter of 40 mm Product temperature up to ± 80 °C With universal connection With pneumatique knife 3 exits belt width 25 cm With support frame in height adjustable New Chedpfx Adsxpvx Ssxod

Condition: excellent (used), Year of construction: 2007, ABB IRB6640-180/2.55 Cleanroom DEVELOPMENT OF GSG ROBOTICS GSG Robotics GmbH,Founded in 2005 in Gütersloh, GSG Robotics GmbH has been based in Marl since 2015 with a generous service area for robot maintenance and repair. Over the years, we have developed to be a holistic partner in all matters relating to industrial robots and automation technology. We are a full-service provider for the two well-known robot manufacturers ABB and Fanuc. Codpfsxq Tugsx Adxshd

Condition: excellent (used), mileage: 454,401 km, first registration: 08/2005, fuel type: diesel, color: black, axle configuration: 4x2, fuel: diesel, driver cabin: day cab, gearing type: automatic, emission class: euro3, suspension: steel-air, loading space width: 2,450 mm, loading space length: 8,650 mm, loading space height: 2,210 mm, Year of construction: 2005, Refrigeration unit brand: Carrier = Further information = Technical information Number of cylinders: 6 Front axle: steered; Suspension: leaf spring Rear axle: dual tyres; Suspension: air suspension Dimensions Dimensions (L x W x H): 1100 x 258 x 384 cm Weights Chodpextfmmjfx Adxjd Empty weight: 11,340 kg Payload: 7,660 kg Gross vehicle weight: 19,000 kg Functional Refrigeration engine: diesel and electric Condition Technical condition: very good Optical condition: very good Further information Please contact Thierry Leemans for more information.