Used Rolling Punches for sale (7,304)

Year of construction: 1973, condition: ready for operation (used), A Troester mixing mill is available. Including strip cooler, year of manufacture: 1993. An on-site inspection is possible. Tjdpfx Ahjxdc Uisuof

Condition: used, Thread rolling machine, cold rolling machine, thread rolling machine, profile rolling machine Manufacturer PEE-WEE Type P 24 Q serial no. LC2403099 year of construction 2004 Rolling force max. 24 ton. Tool diameter max. 200 mm Rolling spindle diameter 69,85 mm Tool bore diameter 70 mm (nominal diameter) Tool length, tool length max. 180 mm Workpiece diameter max. 50 mm Rolling spindle speed 22 - 44 - 95 - 190 rpm Motor power hydraulics approx. 3 kW Motor power roller drive 5.5 kW Tedpfx Ahsh A S Htjujf Mains connection 400 Volt, 50 Hz - Swivel roller spindle for threaded continuous rollers - Rolling spindle speed in 4 stages via gear changeover - Hydraulic system integrated in the machine bed Space requirement L x W x H 2000 x 1750 x 2550 mm Weight approx. 3 tons good condition Grooving rollers: The thread rolling tools with the same pitch as the workpiece form the thread by penetrating into the workpiece up to the nominal diameter. The thread length is maximum as long as the rolling tools are wide. Continuous rolling: When the thread length is greater than the rolling tool width. Through-feed tools have 3 sections - the infeed, the calibration section and the outfeed. Grooved rollers have no pitch and are swiveled with the pitch angle of the profile to be rolled. Pitch rollers differ from grooved rollers in that they have a pitch in the profile. The sum of the pitch angle and the swivel angle gives the pitch angle in the workpiece.

Condition: excellent (used), functionality: fully functional, Year of construction: 2014, Automatic bending machine Co.ma.l Four Matic - 4 rolls (2 with diameter 30 mm / 2 with diameter 37 mm) - Effective bending length: 500 mm - Minimum bendable diameter: 40 mm Todpfx Aoxdr Skshuef - Automatic cycle management - Pedal operation - Digital position display Machine has been used very little and is in good preservation condition. Original documentation and user & maintenance manual are available.

Year of construction: 1998, condition: used, functionality: fully functional, machine/vehicle number: 10302038, Offered is a 3-roll mill from Bühler AG, year of manufacture 1998, and a press from geiger Maschinenbau AG, year of manufacture 2004. Both machines are in used condition and are currently not in operation. In terms of safety, the machines are up to the latest standards. Both machines are ready for operation. Tedjxb Rc Ajpfx Ahujf - 1300 mm roll width - max. 75 kW drive motor An inspection of the machines is possible upon request and by appointment. For further questions, we are at your disposal.

Condition: reconditioned (used), machine/vehicle number: 550-235-ELD, GENERAL CHARACTERISTICS workpiece Ø max. 41 mm Range Module máx/min. 1,5 / 0.39 Rack face width 92 mm Manufacturing No. 550-235-ELD Máx/min. pitch form 20/40-32/64 Tedpfsd Nw Ttox Ahujf Maximum stroke of tools trolley 760 mm Rack length máx. 610 mm ELECTRICAL CHARACTERISTICS Main motor power 15 Cv

Year of construction: 1985, condition: used, Working width 2000 mm Roller width 2200 mm pressure 50 t Pressure line 230 N / mm Tsdpfxjw Df Ubo Ahuef Number of rollers 3 Stück Upper roll 280 dia Roller covering Stahl, verchromt Heating - upper roll Thermoöl Middle roll NIPCO-Walze , 500 mm dia Roller covering Polyamidmantel Lower roll Stahl dia diameter of lower rolls 280 mm Roller covering Schreiner-Gravur Clouth speed max.100 m/min Weight 26 to dimensions of the machine ca. 6,0 x 8,0 x 3,3 m 3-roll calender with 2 steel rolls, upper steel roll smooth - chrome-plated, lower steel roll with carpenter engraving, heating with thermal oil (via heat exchanger), middle roll as NIPCO roll, this can be rotated by 180°, for use in the upper or lower roll nip, infeed with working platform, triple profile spreader holders + metal detector E&L, outfeed with hydraulic MENZEL Sochor winder,

Year of construction: 2006, condition: used, machine/vehicle number: BSxx, Demag roller trolley chassis crane trolley trolley EU RU 11 Payload 1350KG Width adjustable: Todpfxerfwnco Ahuef 10-22cm - 50 pieces 95 euros 22-30cm - 6 pieces 115 euros Used Item location is 75053 Gondelsheim Shipping possible via DHL package, large quantities via shipping company See pictures

Condition: used, Thread Rolling Machine, Cold Rolling Machine, Thread Rolling Machine, Profile Rolling Machine Manufacturer: PEE-WEE Model: UPW 24 Serial No.: P07 Year of manufacture: 2007 Maximum rolling force: 24 tons Maximum tool diameter: 270 mm Roll spindle diameter: 69.85 mm Tool bore diameter: 70 mm (nominal diameter) Maximum tool/reception length: 180 mm Maximum workpiece diameter: 50 mm Hydraulic motor power: 3 kW Roll drive motor power: approx. 5.5 kW Electrical connection: 400 Volt, 50 Hz, 10 kW - Pivotable roll spindle for through-feed thread rolling - Roll spindle speed adjustable in 4 steps via gearbox shift - Hydraulic unit integrated in the machine base - Operating manual with electrical schematic Space requirements (L x W x H): 2,000 x 1,450 x 1,900 mm Weight: approx. 3 tons Very good condition Tedpfxeuz If No Ahusf Plunge Rolling: The thread rolling tools, having the same pitch as the workpiece, form the thread by penetrating the workpiece up to the nominal diameter. The maximum thread length is limited to the width of the rolling dies. Through-feed Rolling: Used when the thread length is greater than the width of the rolling dies. Through-feed tools are divided into three sections – entry, calibration, and exit. Knurling rolls have no pitch and are swiveled at the lead angle corresponding to that of the profile to be rolled. Lead angle rolls differ from knurling rolls by having a pitch in the profile. The sum of the lead angle and swivel angle results in the effective lead angle in the workpiece.

Condition: good (used), Flat-jaw thread rolling machine, thread rolling machine, segment thread rolling machine, cold forming machine, knurling machine, thread rolling machine -Manufacturer: EWM, flat jaw thread rolling machine knurling machine -Type: unfortunately without type designation Tsdji Eg Nkspfx Ahuof -Drive: 4.6/5.8 kW 1435/2890 rpm -Belt drive: 3-way adjustable -Knurling plate: RAA 1.0 -Central lubrication: -Dimensions: 1680/920/H1440 mm -Weight: 1308 kg

Condition: ready for operation (used), Year of construction: 2002, functionality: fully functional, Klingelnberg ZW 301 Gear Measuring Machine with Evaluation Computer Double-flank gear measuring machine with 4-position indexing table - Spur gear - Internal gear - Gear shaft - Computer (evaluation via industrial PC with fully automatic parameter calculation, quality determination, and classification) Workpiece data: Table load including fixture, max. 100 kg Load on support plate/vertical slide including fixture, max. 80 kg Tjdpfx Ahov Ic R Ajujf Workpiece knife with counterholder on measuring and feed slide, max. 300 mm Workpiece knife with counterholder on machine bed, max. 300 mm Device data: Heidenhain LIF 101 position measuring system Center distance min./max. 45/300 mm Table diameter 150 mm Table height above floor 950 mm Measuring pressure min./max. 5/30 daN Total connected load of the test device: 0.75 kVA Total space requirement: LxWxH 1900 x 1200 x 2200 mm Net weight: 750 kg PC, as well as some master wheels with common modules. Weight: 750 kg

Condition: good (used), Maximum pressure 25tn • 69 and 85mm axles Tedpfxegqumpj Ahuof • Machine in very good condition, completely revised

Condition: ready for operation (used), Year of construction: 2001, functionality: fully functional, machine/vehicle number: 109 956, workpiece diameter (max.): 38 mm, workpiece length (max.): 500 mm, TECHNICAL DETAILS Workpiece Rack Length: max. 610 mm Workpiece Diameter: 38 mm Module Range: 0.3 – 1.3 Max. Slide Stroke: 1130 mm Max. Rolling Bar Length: 915 mm Max. Profile Outer Diameter (Standard): 50 mm Max. Profile Width (Standard): 125 mm Gear Cutting (Rollability): 0.3–1.25 Tedpfxowx H R Tj Ahuef Machine Cycle Times Tailstock forward (approx. 300 mm stroke): 1.0 s Rolling bars forward: 4.2 s Tailstock return (approx. 300 mm stroke): 1.5 s Rolling bars return: 4.8 s Loading/Unloading (manual): 5 s MACHINE DETAILS Weight & Dimensions Total Weight (without automation): 12,200 kg Overall Width: 5,014 mm Machine Width: 3,104 mm Depth without cantilever: 2,564 mm Depth with cantilever: 4,166 mm Hydraulic System Hydraulic Tank: 1,000 l Hydraulic Operating Pressure: 80 bar Electrical Equipment Operating Voltage: 400 V / 3 phases Frequency: 50 ±1 Hz Coolant System Tank Capacity: 260 l Pump Pressure: 3 bar Pump Flow Rate: 24 l/min Cooling Water Supply for Hydraulic Tank (Quantity): 10 l/min Cooling Water Connection for Hydraulic Tank (Temperature): 20 °C EQUIPMENT Full enclosure included Tailstock included Hydraulic system included Oil system included

Condition: new, functionality: fully functional, Year of construction: 2025, Size Thread Height Number of Sets Manufacturer TR4 M8x1.25 H63 Duplex 2x RSK Tsdsw If Uuspfx Ahuef TR1 M5 H38 Duplex 2x HP TR2 M5x0.8 H54 Duplex 1x HP TR2 M5x0.8 H52 Duplex 1x Profiroll TR3 M6x1 H58 Duplex 2x RSK TR2 M6x1 H48 Duplex 1x Hilgeland TR2 M6x1 H14 Duplex 1x HP TR4 M8x1.25 H30 Single 3x RSK Schabenut TR2 5x25 Single 1x RSK Coarse thread TR2 M6 H30 Single 1x RSK Schabenut TR3 M8x1.25 H58 Duplex 1x RSK TR3 M10x1.50 H58 Duplex 2x HP TR4 M10x1.50 H25 Duplex 1x RSK TR3 M8x1.25 H65 Duplex 1x HP TR2 M48x1.25 H48 Duplex 2x RSK For sale as a complete package or individually at the lowest price.

Condition: used, Writing desk, mobile desk, shelf trolley, logistics trolley, shelf trolley Transport trolleys, platform trolleys, workshop trolleys FETRA type 5834 Writing surface height: 1100 / 1190 mm Writing surface: 605 x 585 mm Shelves: 600 x 495 Load capacity per shelf: 50 kg Total load capacity: 100 kg - Rolling desk made of tubular steel and sectional steel - Screw construction, powder-coated, blue RAL 5007 - Writing surface on wooden board with stop bar, inclined approx. 10 Todspflp Ejpfx Ahusf - 2 shelves, can be screwed in variably (2 file heights possible) - 4 swivel castors (Ø 125 mm) with plastic rim and rubber coating on the running surface - 2 fixed castors with brakes Space requirement L x W x H: 600 x 600 x 1190 mm Weight: 25 kg Very good, as new condition 8 pieces available, price per piece

Condition: used, Thread rolling machine, thread rolling machine, segment thread rolling machine, cold forming machine, thread rolling head, rolling head Todsu Tyvhopfx Ahuef -Manufacturer:BWF, thread rolling head -Type: RK 12-20 -Thread rollers: M24 x 1.5 -Dimensions: Ø 120 x 180 mm -Weight: 5.6 kg

Condition: ready for operation (used), Year of construction: 2003, functionality: fully functional, CNC Thread, Gear, and Profile Rolling Machine Model ROLLEX 1 Substructure: The substructure of the thread and profile rolling machine consists of welded steel profiles, partially covered with sheet metal. The space for the process lubricant reservoir is located in the front area of the substructure. Main drive: The main drive generates the rotary motion of the rolling tools required for gear rolling. The drive motor is flanged to the base plate of the rolling spindle bearing via the Cyclo Drive gearbox. The rotary motion is transmitted to the rolling spindle via the Schmidt coupling. The machine operates in a speed range of 0 to 30 rpm, with this range further subdivided into 0 to 20 rpm for continuous operation (S1) and 20 to 30 rpm for intermittent operation (S4). The speed is continuously adjustable using a frequency converter. Brand PROFIROLL Type ROLLEX 1 Year of manufacture 2003 Control, Brand, Type Siemens, Sinumerik, 840D Todpfev Uxq Ssx Ahusf Motor power (kW): 18 kW Electrical connection: 400 V Rolling range: Max. rollable workpiece diameter: 40 mm Rolling carriage stroke: 2 x 80 mm Min. / max. center distance of rolling spindles: 160 / 320 mm Rolling spindle height above the machine bed: 160 mm Max. tool diameter: 250 mm Rolling spindle mounting diameter: 120 mm Rolling spindle mounting length: 80 mm Power & Drive Max. rolling force: 100 kN Rolling spindle speed, continuously variable 0-30 rpm Motors Rolling spindle drive: 2 x 13 Nm Hydraulics 50 Hz: 5.5 kW Process lubrication 50 Hz: 0.1 kW Central lubrication 50 Hz: 0.06 kW Temperature range: +5–+40 °C Current type/frequency: 3 N/50 Hz Nominal voltage: 400 V Control voltage: 24 V Auxiliary voltage: 24 V/230 V Connected load: 18 kW Nominal current of the machine: 39 A

Condition: used, functionality: limited functionality, Year of construction: 2025, SHEET METAL ROLLING MACHINE W01-1.5X1300 Technical parameters Todpfjxqff Rex Ahusf Roller diameter 75 mm Roller length 1300 mm Max. sheet thickness 1.5 mm Dimensions 1750x350x1100 mm WARNING !!! LAST ITEM, NEW, PACKAGING IN POOR CONDITION.

Condition: ready for operation (used), Year of construction: 2004, functionality: fully functional, machine/vehicle number: 109987 - 2800015, workpiece diameter (max.): 38 mm, workpiece length (max.): 500 mm, stroke length: 1,950 mm, Suitable for chipless cold forming of profiles such as splines (straight or helical), spiral gears, oil grooves, CV joints, threads and knurls TECHNICAL DETAILS Workpiece diameter: 38 mm Workpiece length: 500 mm Rack length – max.: 610 mm Tedpfx Aswm Hqvshuof Max. slide stroke: 1,950 mm Max. rolling bar length: 1,400 + 330 mm Max. profile external diameter (standard): 60 mm Max. profile width (standard): 175 mm Rollable profiles for involute gears (module range): 0.3–2.0 MACHINE DETAILS Machine weight: 10 t Total power requirement: 52 kW Current type: 3 Ph Frequency: 50 Hz Operating voltage: 400 V Rated current: 99 A Overall width: 5,014 mm Machine width: 4,560 mm Depth without boom: 2,541 mm Depth with boom: 4,165 mm Height: 2,100 mm Total weight (without automation): 14,500 kg Drive power: 45 kW Hydraulic tank capacity: 1,000 l EQUIPMENT - Machine in horizontal design - Complete enclosure - Tailstock - Hydraulic system - Oil system

Condition: used, Year of construction: 2007, Manufacturer: ORT Model: RP18 Year : 2007 Maximum rolling thrust 18 Ton Roller shaft diameter 54 mm Roller shaft key 12 mm Minimum diameter workpiece to rolled 3 mm Maximum diameter workpiece to be rolled 60 mm Max.length workpiece rolled in plunge-feed 175 mm Max.length workpiece to rolled in enfilade — Maximum Pitch workpiece to be rolled 4 mm Maximum roller diameter 185 mm Main motor power 7,5 HP Total installed power 11 HP Maximum noise level 80 db Tjdpev Tqdbjfx Ahujf Net weight 1800 kg Height Rolling shaft from the floor 1035 mm Machine width 1450 mm Standard machine depth 900 mm Total machine height 1800 mm

Condition: used, Year of construction: 2002, functionality: fully functional, machine/vehicle number: M24I/9053, Offer Number: M24I/9053 Machinetype: thread rolling machine - 2 rolls Make: BAD DÜBEN Type: PRX 32 E CNC Constr. year: 2002 diameter range: 10-24 mm Forging power: 7-20 to thread length plunge method: 195 mm daylight: 160 mm max. pitch: 3,5 mm roller bore: 80 mm roller width: 235 mm roller length: 195 mm Todew Nxnwepfx Ahuof rpm: 40 - 315 Location: Germany

Condition: used, Year of construction: 2000, plate punches Tedpfscqxv Tox Ahuof 1. Beil 780-S-St - 3-hole 780/425 - table 1000-1400 2. Bacher 2005 - 2-hole 425 - table 730-1000 3. Bacher 2045 - 2-hole 425 - table 730-1000 4. Beil 425-T-H - 2-hole 425 - table 520-770 5. Stanze 2-hole 425 - table 420-660 - metal frame - SOLD 6. Billows 2-hole 225 - table 650-950 7. Bacher 2032 2-hole 225 - table 300-400 (4) - 1x SOLD 8. Heidelberg SM52 - 425 plate punch 9. Heidelberg SM52 - plate bender - SOLD

Condition: used, shaft length under head: 80 mm, thread length: 58 mm, GW 63 / GW 63SX flat-die thread rolling machines, various models, good condition, top-of-the-line electrical system Tedpewkqvqsfx Ahuef EW Menn including vibratory feeder, Skako, and slide conveyor

Condition: ready for operation (used), Year of construction: 1997, functionality: fully functional, machine/vehicle number: 109853 - 280028, workpiece diameter (max.): 38 mm, workpiece length (max.): 500 mm, TECHNICAL DETAILS EX-CELL-O Cold Rolling Machine with Felsomat (1999) Design: Horizontal Area of application: Chipless cold forming of profiles such as splines (straight or helical), spiral gears, oil grooves, CV joints, threads, and knurls Workpiece data Workpiece diameter: 38 mm Workpiece length: 500 mm Profile width: 92 mm Profile outer diameter (standard): 50 mm Profile width (standard): 125 mm Rollable profiles for involute gears: 0.3 - 1.25 m Rolling bar length: 610 mm Travel movements Slide stroke: 760 mm Cycle times Tailstock forward (at approx. 300 mm stroke): 1.0 s Rolling bars forward: 3.0 s Tailstock retraction (at approx. 300 mm) Stroke): 1.5 s Rolling bars return: 3.5 s Loading/unloading (manual): 5.0 s Cycle time: 14.0 s Gear cuts/hour at 100% Ne: 260 Tedjwmb Trepfx Ahuef MACHINE DETAILS Overall width: 5,014 mm Machine width: 2,360 mm Depth without boom: 2,541 mm Depth with boom: 4,165 mm Height: 2,100 mm Machine weight: 10 t Electrical design – Voltage/Frequency: 380/50 V/Hz Total power requirement: 24 kW Drive power: 22 kW EQUIPMENT - Complete enclosure - Tailstock - Hydraulic system - Oil system

Condition: used, Year of construction: 2001, functionality: fully functional, machine/vehicle number: M50E/9046, Offer Number: M50E/9046 Machinetype: hot rolling machine Tjdpfxsw Nxius Ahusf Make: SKF Type: EMB 110 Constr. year: 2001/2021 diameter range: 110 mm max. outside dia. of round pieces: 110 mm kind of heating: 335 KW Location: Europe

Condition: ready for operation (used), Year of construction: 2006, functionality: fully functional, workpiece diameter (max.): 160 mm, rotational speed (max.): 300 rpm, workpiece length (max.): 25 mm, TECHNICAL DETAILS Description: Hydraulic internal rolling machine for tapered or cylindrical back rolling of profiles on sliding sleeves, sliding gears, or similar parts. Workpiece Data Workpiece diameter: 160 mm Workpiece length: 25 mm Workpiece internal gearing, adjusted approx.: 85 mm Workpiece external: 75 - 140 mm Workpiece width approx.: 16 - 36 mm Workpiece external pressure ring, adjusted: 160 mm Travel and setting data Maximum travel of the rolling carriage: 60 mm Center distance between workpiece and rolling wheel: 22 mm Rolling wheel speeds, continuously adjustable: 30 - 300 rpm Rolling pressure, continuously adjustable (at 100 bar): 6.1 t Control system: SIEMENS PLC Monitoring control: LAUER PCS 900 / BRANKAMP C 90 with screen display MACHINE DETAILS Machine weight approx.: 4,500 kg Space required approx.: 2.5 x 2.5 x 2.1 m Spindle drive approx.: 6 kW Total drive: 14 kW Tjdpfswmb Rksx Ahusf Total power requirement: 14 kW Operating voltage: 400 V Frequency: 50 Hz EQUIPMENT - Workpiece carousel loading device for 18 workpieces with workpiece inspection station - Workpiece transport device - Changeover time to a different workpiece size: 30 min / Machining time per workpiece approx.: 25 s - Workpiece storage for intermediate storage - Separate hydraulic system - Separate control cabinet - Coolant system Note: Working areas are approximate and depend on the workpiece and tool conditions.