Used Roller Machine for sale (68,947)

Condition: good (used), Ingramatic RP1 Ibodpjhrdnkjfx Aatoa Max diameter: M6 Max. thread length: 42mm Max. shank length: 75mm Year: 80's

Condition: ready for operation (used), Year of construction: 2003, Brand: Burkle Model: SLC Machine no: 10362-02 Year of manufacture: 2003 Technical data of the machine (BURKLE SLC) General data - Type: SLC - Working width: 1300 mm - Working height: 900 ± 20 mm Ijdpfxov Hw Hcj Aatsba Workpieces - Workpiece characteristics: Flat, self-rigid - Workpiece width (max): Working width - Workpiece width (min): 350 mm - Workpiece length: 3 - 100 mm - Tolerance of the workpiece height over the entire working width: - Single track operation: ± 0.5 mm - Multi-track operation: ± 0.2 mm - Workpiece weight (max): 250 kg Piling material - Inspection material/cleaning agent with a self-ignition temperature: ≥ 200 °C Transport unit - Back pressure roller: See order confirmation - Rubber ring: See order confirmation - Diameter: 186 mm - Feed speed: 8 - 25 m/min Material circulation - Material pump feed capacity (double stroke): 575 cm³ Piling unit Piling roller - Rubber ring: See order confirmation - Diameter: 238 mm - Temperature (in case of optional heating/cooling application roller): Max 60 °C - Peripheral speed: Approx. 8 - 25 m/min Dosing roller - Diameter: 174 mm - Temperature (with optional heated/cooled dosing roller): Max 60 °C - Peripheral speed: Approx. 3 - 9 m/min Accuracy of application over the entire working width at: - Application rate > 10 g/m²: ± 5 %. - Application rate < 10 g/m²: ± 10 % Adjustment of the feed-through height - Feed-through height (max): 120 - 5 mm - Accuracy of setting: ± 0.1 mm Compressed air connection - Required air pressure: 6 bar - Compressed air consumption: Approx. 50 NI/min Dimensions / weights - Dimensions: See installation drawing - Weight at working width 700 / 1300 / 1600 mm: 1250 / 1450 / 1600 kg Electricity - Connection values, voltages: See data sheet for electricity Other information - Noise level: < 70 ± 4 dB (A) Table 1-4: Technical data for standard sizes of the machine (continued) Note: The speed is limited to a maximum of 20 m/min when the dosing roller and height setting are set to a safety distance exceeding 120 mm (cleaning coupling). Stock no: 2002442BXM

Condition: used, Year of construction: 1996, center height in crank: 1,100 mm, workpiece weight (max.): 80,000 kg, grinding length: 14,000 mm, grinding wheel diameter: 915 mm, grinding diameter: 2,000 mm, quill stroke: 200 mm, quill diameter: 260 mm, workpiece weight between centers: 80,000,000 g, workpiece diameter between centers: 2,000 mm, workpiece length between centers: 14,000 mm, power: 35 kW (47.59 HP), High capacity cylinder grinder with hydrostatic guides POMINI mod. HD 402/425 - year 1996 - maximum diameter 2000mm - working length 14000mm - tip capacity 80000 kg. Possibility of complete retrofit of the machine's electrical unit, manageable updates or modifications for application change. Grinder disconnected and ready for collection. Ibsdpfx Ajtxlyxoatea

Year of construction: 2010, operating hours: 50 h, condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: OMMA HGS 314, Roller applicator for hot melt polyurethane adhesives. Usable working width: 1300 mm. Working thickness: from 3 mm to 80 mm. Working speed: from 5 to 25 m/min. Working temperature up to 140 °C. Adhesive applicator roller diameter: 250 mm. Installed power: 15 kW. Power supply: 400 V / 50 Hz / 3+N. Ijdpfxjxfb N Io Aateba

Condition: excellent (used), Year of construction: 2004, I sell the 1-cylinder roller coater BURKLE SLC1300. Year 2004 Working width 1300mm Very good condition. Fully working. Ibsdpfjwun Hbox Aatea Available immediately.

Year of construction: 2016, condition: excellent (used), functionality: fully functional, machine/vehicle number: 02_01_08, Eurotech Way Automatic Glass Edge Coating Machine Professional automatic machine for glazing and lacquering the edges of glass sheets. Suitable for glass panes with thickness of 4–19 mm and allows precise application of enamel/glaze on edges of 10–200 mm width. Equipped with dosing and application roller system, automatic parameter setting, roller conveyor system, and recipe memory for settings. Perfect for batch production in the glass industry—ensures uniform, aesthetic, and repeatable edge finishing. The machine fully automates the process and significantly increases productivity. Low usage – only 25,206 cycles performed in total. Dimensions: 5864 x 2695 mm Power supply: 400V - 50 Hz Required power: 4 kW Weight: 4000 kg Interface in 3 languages: English, Italian, Polish Iodpfx Asxzfu Teatsba Operational machine, possible to test before collection. Ready for pick-up. Dismantling, loading, and transport are the responsibility of the buyer.

Condition: excellent (used), Year of construction: 1996, I sell the 1-cylinder roller coater BURKLE SAL. Working width 1300mm Very good condition. Fully working. Ibjdjt S Eb Uspfx Aatsa Available immediately.

Condition: excellent (used), I sell the 2-cylinder roller coater Superfici Elmag FVR. Working width 1400mm Iedpfxeiuc R Re Aateba Very good condition. Fully working. Available immediately.

Condition: excellent (used), Year of construction: 1998, I sell the 1-cylinder roller coater BURKLE SAL1300. Working width 1300mm Very good condition. Fully working. Available immediately. Ibedsi Euqqopfx Aatea

Condition: excellent (used), Year of construction: 2002, I sell the 1-cylinder roller coater BURKLE SAS1300. Working width 1300mm Very good condition. Fully working. Available immediately. Ibjdpfxst S D Ums Aatsa

Condition: excellent (used), Year of construction: 1998, I sell the roller coater Cefla Sorbini Smartcoater T/20-MF. Isdjynvwyspfx Aatsba Year 1998 Working width 1300mm Suitable for wet on wet, stains, primers and sealers coating application. Very good condition. Fully working. Available immediately.

Condition: excellent (used), Year of construction: 2001, I sell the roller coater Cefla Sorbini Smartcoater T/20-MF. Ibsdpowink Njfx Aatja Year 2001 Working width 1300mm Suitable for wet on wet, stains, primers and sealers coating application. Very good condition. Fully working. Available immediately.

Condition: excellent (used), Year of construction: 2006, I sell the roller coater Cefla Sorbini Smartcoater M. Year 2006 Working width 1300mm Suitable for wet on wet, stains, primers and sealers coating application. Very good condition. Fully working. Available immediately. Iodjg D Uuiepfx Aatoba

Condition: new, Year of construction: 2025, control type: NC control, actuation type: hydraulic, number of rollers: 3, roller (bottom) diameter: 250 mm, roller (top) diameter: 250 mm, side roll diameter: 200 mm, roller length: 2,050 mm, sheet thickness (max.): 12 mm, STANDARD EQUIPMENT Steel construction main frames Hydraulic upper roll opening head Movable control panel Centrally driven rolls powered by motor Hydraulically adjustable rear and lower rolls Precision bending with braked main motor Conical bending and pre-bending system Lower and upper roll drive by planetary gearbox Rear roll ball support system to facilitate sheet movement Compliance with EU safety directives High-strength forged steel rolls made of SAE 1050 (CK45) certified steel Hardened shafts Digital readouts (2 units) Operation manual OPTIONAL EQUIPMENT Overhead crane (elevator) for support in large diameter bending Hydraulic side supports for assistance in large diameter bending Ground and polished rolls Wire grooves at shaft ends NC control unit Dual speed operation Stepless speed adjustment Isdpsw Slctofx Aatoba Ejector system Hydraulic motor option TECHNICAL SPECIFICATIONS Bending Length: 2050 mm Pre-bending: 8/10 mm Bending Capacity: 10/12 mm Upper & Lower Roll Diameter: 250 mm Side Roll Diameter: 200 mm Min. Bending Diameter: 375 / 1250 mm Motor Power: 7.5 + 1.5 kW Bending Speed: 5 m/min Tank Capacity: 25 l Length: 4000 mm Width: 1200 mm Height: 1370 mm Weight: 4200 kg

Year of construction: 2025, condition: new, Roller Conveyor Shotblasting Machine Sheet, Profile and Finished Metal Product Blasting Machine: It consists of Cabin, Turbine System, Conveyor System, Recycling System, Filtration System, Control Panel and Platform. Roller Conveyor Blasting Machines consist of Metal Sheet Shot Blasting Machines, Profile Shot Blasting Machines. Material is sent to the cabin on specially manufactured roller conveyor. The surface cleaned material is ready for the next process (painting, coating, etc.) at the cabin exit. It is used in sheet, NPI, NPU, Profile blasting processes. Ideal for rusting, roughening and cleaning before painting. The cabin is made of ST-37 sheet metal and blasting zone is supported by manganese wear plates. Hardox sheets have been added to the parts of the leggings that are close to the blasting zone. The wear plate cladding is screw-in design for future wear-based replacements. Iedpfxevnrr Aj Aatsba The side wear plate, top wear plate, front and rear wear plates, blades, impeller, control cage, steel shot feeding elbow of the turbines on the machine are made of Ni-Hard cast iron chemical composition. CODE W x H(mm) TURBINE SK - 1 1.000 x 500 4 x Ø 300 SK - 2 1.500 x 500 6 x Ø 300 SK - 3 1.500 x 1000 6 x Ø 400 SK - 4 2.000 x 500 8 x Ø 400 SK - 5 2.000 x 1000 8 x Ø 400 SK - 6 2.000 x 1.500 10 x Ø 400 SK - 7 2.500 x 1.000 12 x Ø 400 SK - 8 3.000 x 1000 16 x Ø 400 SK - 9 3,000 x 1.500 16 x Ø 400 SK - 10 4.000 x 2000 22 x Ø 400

Condition: new, Year of construction: 2025, workpiece weight (max.): 12,000 kg, turntable diameter: 280 mm, overall weight: 120 kg, The Robotmover 20 is the ultimate solution for moving heavy loads such as industrial machinery, installations, or steel structures – 100% electric, so zero emissions and noise pollution. Work with unparalleled flexibility thanks to the wireless remote control and the ability to effortlessly change direction 360°. This compact electric mover excels at maneuvering through tight spaces, making it an indispensable tool in congested or confined environments. Thanks to the 48V-60Ah battery, the Robotmover ensures long-lasting operation, saving both time and labor. Whether you're moving equipment or heavy loads, this electric Robotmover is your reliable partner that streamlines your work and increases productivity. Flexible Operation: The wireless remote control provides infinitely variable drive with 360° direction changes. Isdpfx Aaow I Rt Nstjba Strong Traction: The two powerful 1000W motors equipped with magnetic brakes produce a robust pulling force of 20 tons. High Load Capacity: The triple-bearing turntable effortlessly carries a maximum load of 12 tons. Long Battery Life: The 48V lithium-ion battery with a 60 Ah capacity provides 4-5 hours of use without frequent charging. Scope of supply: Robotmover 20, remote control, battery chargers Also available transport crate with garage, battery operated hydraulic jacks, fixed following rollers electric skates power skates machine mover robot mover jung lifting equipment hydraulic jacks

Condition: new, functionality: fully functional, Year of construction: 2026, control type: PLC-controlled, degree of automation: automatic, actuation type: hydraulic, controller manufacturer: Siemens, controller model: PLC, number of rollers: 4, roller (bottom) diameter: 190 mm, roller (top) diameter: 210 mm, side roll diameter: 170 mm, roller diameter: 210 mm, roller length: 2,050 mm, working width: 2,000 mm, roller height adjustment: 700 mm, working height: 700 mm, sheet thickness (max.): 8 mm, sheet thickness steel (max.): 8 mm, sheet thickness stainless steel (max.): 5 mm, sheet thickness aluminum (max.): 10 mm, sheet thickness brass (max.): 15 mm, sheet thickness copper (max.): 15 mm, overall weight: 5,000 kg, total length: 4,600 mm, total width: 1,400 mm, total height: 1,700 mm, power: 5.5 kW (7.48 HP), input voltage: 400 V, input current: 30 A, input frequency: 50 Hz, number of digital displays: 1, warranty duration: 24 months, Equipment: cone bending device, documentation/manual, emergency stop, foot remote control, hardened rollers, W12-8X2000 Four-roller Plate Rolling Machine This machine is equipped with plate end pre-bending and CNC rolling functions. It allows the metal plate to be fed in one single pass, completing pre-bending and roll forming of the workpiece without the need for turning over the plate. The upper working roller serves as the main drive roller, while the lower roller and two side rollers are hydraulically driven. Their lifting strokes are controlled by the CNC system, enabling automatic leveling with a synchronous display accuracy of ±0.1 mm. The tilting and resetting of the tilting bearing housing adopts a hydraulic transmission structure, and the upper roller is equipped with a balancing mechanism to facilitate the removal of the finished workpiece. The machine comes with a movable independent control console for flexible repositioning at any time, and is equipped with safety interlock devices to ensure safe and reliable operation. Ibsdpey Ugtaefx Aatoa Working Roll Material The working rolls are made of 42CrMo high-strength premium alloy steel, manufactured through forging, rough machining, and quenching & tempering heat treatment, achieving a bulk hardness of HB 240–300. After finish machining, they undergo medium-frequency induction hardening, resulting in a surface hardness of HRC 47–58. The products comply with the JB/ZG4289-86 standard for roll steel, ensuring uniform roll rigidity with a controlled deflection of (1/700–1/1000)L. Note: L refers to the center distance between the two side frames. The entire production process strictly follows the standard manufacturing flow for rolls, fully guaranteeing the comprehensive mechanical properties of the working rolls. Working Roll Rotation & Drive System The upper roll is the driving roll of the four-roller rolling machine. It is fitted with an independent hydraulic motor directly coupled to the heavy-duty gear housing, with no intermediate gear transmission. This is the most energy-efficient drive design. The hydraulic motor is equipped with an instant braking device, enabling accurate positioning of the roll shaft during pre-bending operations. Double-row spherical roller bearing Excellent Self-aligning Performance The outer ring adopts a spherical structure, allowing the inner ring and roller assembly to deflect within an angle of 1.5°~3°. It can automatically compensate for misalignment caused by installation errors and shaft deflection, preventing seizure and abnormal wear. Heavy Load & Impact Resistance Line contact between rollers and raceways enables the bearing to withstand extremely high radial loads as well as bidirectional axial loads, perfectly suited for heavy-duty working conditions of rolling machine rolls. High Durability Made of high-strength bearing steel with quenching and other heat treatments. Combined with a well-designed lubrication system, it ensures long-term stable operation under harsh conditions and greatly reduces downtime for maintenance.

Condition: ready for operation (used), Year of construction: 2003, functionality: fully functional, turning diameter over cross slide: 272 mm, turning length: 1,250 mm, turning diameter: 470 mm, spindle bore: 80 mm, spindle speed (max.): 2,500 rpm, spindle speed (min.): 50 rpm, travel distance X-axis: 1,250 mm, rotational speed (min.): 50 rpm, rotational speed (max.): 2,500 rpm, total height: 1,850 mm, total length: 2,700 mm, total width: 1,350 mm, type of input current: three-phase, overall weight: 2,300 kg, XYZ Proturn CNC/Manual Lathe Model: Proturn 410 Control: Proto Trak LX2 Swing Over Bed: 470mm Swing In Gap: 730mm Swing Over Cros Slide: 272mm Distance Between Centres: 1250mm Spindle Speeds: 50-2500 RPM Spindle Bore: 80mm Machine With: 300mm 3 Jaw Chuck Quick Change Toolpost with Holders Dimensions: 2700 x 1350 x 1850mm high Ibedpfx Aszux Iyoatoa Weight: 2300 Kgs

Condition: excellent (used), XYZ SMX 3500 3 Axis CNC Bed Milling Machine ProtoTRAK SMX Control Spindle: 5HP – Programmable 40 – 5000rpm 2 Ranges 40 – 600 & 300 – 5000rpm ISO40 Quill Dia 105mm Year of Manufacture 2008 Table: 1370 x 355mm 4 0ff T Slots T Slot size 15.9mm Max load 600kgs Travel: Iedpfjzuxn Tex Aateba X – 787mm Y – 508mm Head Vertical (Z) – 500mm Quill (Z) 127mm Dims without travel – 1905 x 2069 x 2225mm Dim with travel – 2758 x 2869 x 2490mm Weight 2430Kgs Power Requirements 22A Air Requirements 6bar For sale with Jet Machinery Ltd Jet Machinery Stock No: #79245 Machine Serial Number: 10731 Cost: £17,950.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: excellent (used), XYZ Proturn SLX 355 ProtoTRAK CNC Gap Bed Centre Lathe ProtoTRAK SLX Control (2011) Max’ Distance Between Centres 1000mm Max’ Swing over Cross-slide 225mm Max Swing over Bed 360mm Spindle Bore 52mm Spindle Speeds 50 – 4000 rev/min Spindle Motor 5.75Kw Quick Change Tool Post Tailstock MT4 Tailstock Dia’ 75mm Tailstock Travel 160m Manufactured | 2011 Supplied with: 3 Jaw Chuck Interlocking Chuck & Main Guards Machine Manuals 3 Toolholders (More available if required). TRAKing Constant Surface Speed Coolant Worklight Auto Lubrication Ijdpfxozuxnaj Aatjba For Sale with Jet Machinery Ltd Jet Machinery Stock No: #79003 Machine Serial Number: SL281 Cost: £22,500.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, turning length: 1,750 mm, spindle bore: 104 mm, spindle speed (max.): 1,800 rpm, type of input current: three-phase, Model:Prototurn 555 Swing Over Bed:560mm Distance Between Centres:1750mm Control: Prototrak SLX Ibjdpfx Aezrnkrsatja Spindle Speeds: To 1800 RPM Spindle Bore:104mm With: 300mm 3 Jaw Chuck Fixed Roller Steady Quick Change Toolpost Toolpost Holders Dimensions: 3940 x 2250 x 1910mm high Weight: 4100 Kgs

Condition: used, XYZ 2-OP Compact Vertical machining Centre Year 2017 Pro-Track TMX Control Table Size: 457 x 381 mm X/Y/Z Travels: 355 x 305 x 455 mm Spindle Speeds: 50- 6,000 rpm Iedpezu Ni Uofx Aatsba Spindle BT 30 Spindle 3hp 8 Station Tool Changer Machine Weight: 1,100 kg Footprint: 760 x 1,220 mm

Condition: good (used), Year of construction: 2013, 480mm swing over bed, 257mm Swing over the Cross-slide, Ibodpfx Aszqr Hnoatea 1250mm between centres, 80mm spindle bore, 25-2500rpm spindle, 7.5kW Spindle Motor, coolant, Prototrak SLX Control, 3 jaw chuck, QCTP & holders, tailstock.

Condition: ready for operation (used), Year of construction: 2020, functionality: fully functional, machine/vehicle number: 2003031, total height: 1,550 mm, total width: 1,070 mm, total length: 1,670 mm, type of input current: AC, overall weight: 450 kg, input voltage: 220 V, Fully Servo Controlled Automatic Flow Wrapper / Pillow Packing Machine – KFD323 – Fully Working Ibodjzt Ugvepfx Aatea Fully automatic servo-controlled horizontal flow wrapping / pillow packing machine for sale. The machine is used, fully tested and in excellent working condition. It features a fully servo-controlled system, providing accurate and consistent control of product feeding, film movement, bag length and sealing. This is a high-speed industrial machine capable of running at up to 150 packs per minute, depending on the product, film and pack dimensions. The machine can be seen running and working before purchase, and a video of the machine in operation can also be provided. Main Specifications Model: KFD323 Machine Type: Automatic Horizontal Flow Wrapper / Pillow Packing Machine Control: Fully servo-controlled system Condition: Used – fully tested and working Production Year: 2020 Speed: 30–150 bags/min Power Supply: 220V / 50Hz Motor Power: 4.7 kW Heating Power: 2.1 kW Film Width: 80–370 mm Machine Weight: Approx. 450 kg Dimensions: Approx. 3670 × 1070 × 1550 mm Applications Suitable for high-speed automatic packaging of a wide range of products, including: Bakery products Biscuits and confectionery Food products Snack products Household products Hardware and components Medical/disposable products General consumer goods The machine produces professional pillow-style sealed packs and can be integrated into an existing production or packaging line. Condition The machine is fully operational and has been tested prior to sale. All main functions, servo controls, film feeding and sealing systems are working correctly. Ready to go straight into production. This is an excellent opportunity to purchase a fully servo-controlled high-speed flow wrapper at a fraction of the cost of a new machine. Viewing and inspection are welcome. A video showing the machine running is available on request. Please contact me for further information, additional photographs, videos, or to arrange a viewing.

Condition: used, Year of construction: 2017, Used 2014 XYZ SMX 5000 CNC / Manual Bed Milling Machine. Supplied with ProtoTRAK SMX Control, Electronic Handwheels, TRAKing & DXF File Reader, Power Drawbar, Fully Programmable Spindle Drive and Custom-Made Splash Guards. SPECIFICATION: TRAVELS: X Axis: 1,524 mm Y Axis: 596 mm Z Axis: 540 mm Maximum Daylight Under Spindle: 610 mm Quill Travel: 140 mm TABLE: Length: 1,930 mm Width: 356 mm T-Slot Width: 15.9 mm Maximum Table Load: 850 kg SPINDLE: Motor Power: 5.75 kW (7.5 HP) Speed Range: 40 - 5,000 rpm Taper: ISO 40 Quill Diameter: 116 mm Programmable Spindle Drive Ibedpfxjzgwq De Aatoa HEAD: Head Tilt Left: 45° Head Tilt Right: 45° CONTROL: ProtoTRAK SMX Conversational CNC Control Electronic Handwheels TRAKing Function EQUIPMENT: Power Drawbar Splash Guards GENERAL: Machine Weight: 3,100 kg