Used Rima for sale (686)

Condition: good (used), Year of construction: 2012, Sigel coating machine Prima V6 Nordson incl pump coating machine incl filter pump S16 Cjdpfx Aen Rym Nebbsaa used condition, from running operation, overhaul by experts recommended (contact can be arranged)

Condition: excellent (used), Year of construction: 2011, Prima Industrie Platino 1530 laser cutting machine only 4300 hours cutting hours This Prima Industrie Platino 1530 laser cutting machine 4,0kW CO2 was manufactured in Italy in the year 2011 and installed at the end of 12/2011. PRIMACH 20 L control unit. Caedpeivg Hgjfx Abboa

Condition: as good as new (ex-display), Pneumatically controlled edge banding machine with 7 units: Jointing cutter unit including AIGNER diamond jointing cutter heads, with DIA quick-change knife system Konstantin and controlled edge air blast nozzle behind the 2nd jointing cutter head. End trimming saw unit with extraction device, including two pneumatically swiveling saw blades, adjustable and programmable from the control panel. Radius milling unit with pneumatic 2-position revolver, adjustable and programmable from the control panel. Includes 2 quick-change motors with R=1mm radius cutters and 2 quick-change motors with R=2mm radius cutters. Corner rounding unit (copy milling unit) with insert table function and pneumatic 2-position revolver, adjustable and programmable from the control panel. The entire unit can be pneumatically engaged/disengaged from the control panel. Includes 1 quick-change motor with R=1mm and 1 quick-change motor with R=2mm. MULTI-radius scraper unit, radius 1mm and radius 2mm, with pneumatic 4-position revolver. The unit can also be pneumatically engaged/disengaged. Includes extraction system with chip collection box for scraper shavings. Flat scraper unit with four-way usable scraper knives. The entire unit can be pneumatically engaged/disengaged. Removed glue residues are extracted. Buffing unit with two ORIGINAL Riepe cloth-sisal-lamella wheels, arranged at an angle, for cleaning and polishing. General features: - Infeed fence with handwheel adjustment (jointing thickness adjustment) and digital readout - Upper pressure beam with digital workpiece thickness display and handwheel adjustment - Pressure zone with digital display and handwheel adjustment - High-gloss package: roller tracing for radius milling unit, radius scraper unit, and flat scraper unit - Large panoramic noise and safety enclosure for all units and the glue tank - Interior lighting - Operator panel with 15'' touchscreen and intuitive operation - USB port for data backup and transfer - Network connection for online support - Controlled pneumatic cylinder for workpiece distance control - Teflon-coated glue tank with quick-change system and energy-saving standby mode - Glue roller with feed auger for long and tall workpieces (especially for PUR adhesive) - Additional quick-change glue tank - Pressure zone with 3 pressure rollers, with the first roller motor-driven - Heavy-duty roller edge shear for edges up to 54 x 3mm - Original RIEPE spray system - Before the jointing cutter unit: LPZ II separating agent - Before the saw unit: LP 289/99 cooling and antistatic agent - Before the milling unit: NFLY lubricant - Before the buffing unit: LP 193/63 cleaning agent Technical data: Edge thickness: 0.4 - 3 mm Min. panel width (without corner rounding unit): 80 mm Min. panel width (with corner rounding unit): 130 mm Caedpfx Ajw Rd Ixebboa Min. panel length (without corner rounding unit): 100 mm Min. panel length (with corner rounding unit): 300 mm Min. panel thickness: 10 mm Max. panel thickness: 50 mm Feed speed: 11 m/min Extraction ports: 3 x 150 mm Connection: 9 kW - 400 V / compressed air: 6 bar

Condition: new, Siemens 1FN6024-1LE11-0KA1 linear motor / primary part Version: 01 SN: JFM/C1044532, unused in opened original packaging, 100% functional, scope of delivery as per photos ATTENTION: Please enquire for charges for packing and transport separately! ATTENTION: Please enquire for charges for packing and transport separately! Casdpfot N Dr Hsx Abbja

Year of construction: 2010, condition: like new (used), I sell the panel beam saw SCM Sigma Prima 67. Year 2010. Cutting size 3300x3200mm. Cutting height 67mm. Max saw blade diameters 320 + 160mm Main motor 7,5kW Scoring motor 1,3kW Cajdpfji Evbzex Abbja Total power 10kW Total area covered W.5400mm x D.7000mm 8 pcs. gripper with pneumatic regulation Side alignment top roller with pneumatic stroke. WinCut optimising software included. Label printing included. Software Ottimo Perfect Cut included. Very good condition. Available immediately.

Year of construction: 2025, condition: refurbished (used), Complete automatic Stirrup bender PRIMA 12, manufactured by SCHNELL (Italy) Full revamped “as new”, Up to 12 mm SCOPE OF SUPPLY Two pay-offs for wire coils. - Composed by basement & coil support. - Coils weight max. 3.800 Kg coils. - With automatic pneumatic brake controlled from the computer of the line. Rebar straightening & cutting machine Schnell PRIMA 12 - Straightening devices with mechanical setups and separate adjustment for each strand. - Serial interface to Minicontrol type computer. TECHNICAL SPECIFICATIONS Revamping year: 2025 Original manufacturing year: 2005 Wire diameter: - Single strand up to: 4 – 12 mm - Double strand up to: 4 – 10 mm Max pulling speed: 120 m/min Central mandrels Ø: 20 – 50 mm Max bending angle: 180° Max Bending speed: 1650° / sec Working pressure: 7 bar Average power consumption (400 V/50 Hz; 480V/60 Hz): 2 kW/h Dimensions: 3530 x 1330 x 2180 mm Weight (approx.): 2300 Kg Original manufacturing year: 2005 Revamping year: 2025 Wire diameter Single strand up to: 4 – 12 mm Wire diameter Double strand up to: 4 – 10 mm Max pulling speed: 120 m/min Central mandrels Ø: 20 – 50 mm Max bending angle: 180° Max Bending speed: 1650° / sec Casdpfx Absvtp Rmobea Average power consumption (400 V/50 Hz; 480V/60 Hz): 2 kW/h Working pressure: 7 bar Weight (approx.): 2300 Kg Dimensions (approx.): 3530x1330x2180 mm

Condition: excellent (used), Year of construction: 1981, - Spindle diameter 30 mm Cjdpfx Abevvh Atoboaa - Tool diameter max. 200 mm - Spindle speed 4500/9000 rpm.

Condition: used, Year of construction: 2023, 1707352M 4 BODY / 1707260M WITHOUT EXTENSION / 1707082M GRINDEL STONE PROTECTION NSH / VML / 1707083M GRINDEL STONE PROTECTION NSH / VML / 1729005M MEN'S SWIVEL VML4E / 1707553M P.HEAD STD MASTER L / 1707556M HEAD MEC VMASTER L / 174650 Cajdpfxsr Id Sae Abboa

Condition: as good as new (ex-display), Edge banding machine as demo unit 5 units (aggregates): Joint trimming unit incl. AIGNER diamond joint cutter heads, with Konstantin DIA interchangeable knife system and controlled edge air-blast nozzle behind the second joint cutter head. End trimming unit: 1 motor, 2 saw blades Radius milling unit with Easy Set adjustment system Radius scraper unit, retractable, incl. - Extraction device with chip collection box for scraper shavings - with Easy Set adjustment system - 2 digital readouts Flat scraper unit with 4-way usable scraper blades. The unit is retractable. General features: - High-gloss package: tracing rollers for the radius milling unit, radius scraper unit, and flat scraper unit - Large viewing, noise, and safety enclosure for all processing units and the glue pot - Teflon-coated glue pot with energy-saving mode in standby - Glue application roller with feed screw for long and tall workpieces - Pressure zone with motor-driven 1st steel pressure roller + 1 rubber roller - Reel shear for edging 44 x 2 mm Csdew Rcmyjpfx Abboaa Technical data: Edge thickness: 0.4 – 2 mm Min. panel width: 120 mm Min. panel length: 90 mm Min. panel thickness: 10 mm Max. panel thickness: 40 mm Feed speed: 7 m/min Extraction connections: 3 x 150 mm Connection: 8 kW - 400 V / pneumatic: 6 bar

Condition: new, Siemens 1FN6024-1LE11-0KA1 linear motor / primary part Version: 01 SN: JFM/C1044531, unused in original packaging, 100% functional, scope of delivery as per photos, scope of delivery as per photos ATTENTION: Please enquire for charges for packing and transport separately! ATTENTION: Please enquire for charges for packing and transport separately! Codpfxjt Uxduo Abboaa

Year of construction: 2007, condition: good (used), Technical Data: Size: max 480 x 320 mm Sizes untrimmed high folio lap: max 480 x 320 mm min 105 x 115 mm with Accessories 90 x 80 mm Sizes untrimmed low folio lap: max 480 x 300 mm min 105 x 125 mm Mechanical Speed: 21" chain pitch 14.000 c/h Power consumption: max 11 kW Pressure-vacuum pump depending on configuration Compressed air (to be supplied by purchaser) depending on configuration 6 bar Equipment: Gathering chain & feeder: · 8 Station gathering track Feeders: · 5 Feeders 370 Cover folder feeder: · 1 Cover folder feeder 1529 Stitching unit: · 1 Stitching unit 390 · 1 18" inch chain pitch · 1 Transfer right · 1 Wire unwind device · 1 Thickness control/ plus-minus · 1 Oblique sheet control Stitching heads: · 2 Stitching heads HK 75 Three knife trimmer: · 1 Three knife trimmer 449 Knifes: Cajdpfx Abjmn Sk Nsboa · 2 Sets of knives Standards: · Standard accessories Condition: · working condition Availability: · immediately · Machine can be visited in production Optional equipment (not included!): · additional feeders · double production device · compensating stacker · card gluer · inserting machine · inkjet systems All technical data is for information purposes only! Although the technical information is mostly taken from manufacturers documents, no guarantee can be given for correctness due to e.g. undocumented changes of the equipment. By no means are these values intended to be binding or part of the contract.

Condition: used, Year of construction: 2019, Frame swivel device hydr. pendulum support wheel / Caedpfx Asr N Nc Rsbbea

Condition: used, Year of construction: 1991, Allis Chalmer 60 109 M-II Primary Gyratory Crusher Caedovg A Raepfx Abbea 2 complete units, intake size: 1,500 mm (60 inches), cone diameter: 2,725 mm (109 inches), output size: 175 to 250 mm (7 to 10 inches), throughput: approx. 4,700 to 6,400 t/h, without electric motor (required drive power: 750 kW), including one hydraulic hammer each, total weight: approx. 570 t per unit

Condition: new, Year of construction: 2025, functionality: fully functional, CONSTMACH primary impact crushers are among the most preferred solutions among rock crushing machines, offering high efficiency and superior crushing performance. They deliver excellent results in crushing soft and medium-hard rocks, limestone, marble, and similar materials. These crushers enable a high percentage of cubic product to be obtained thanks to their powerful rotor structure and optimized impact plates. This feature ensures that the final product is superior in terms of both quality and granulometric homogeneity. Thanks to the hydraulic adjustment mechanism, adjustments can be made quickly and safely. In addition, there is minimal time loss during maintenance. The durable body structure, manganese-lined inner surfaces that provide protection against wear, and wide feed opening guarantee long-lasting use and high performance. With all these features, primary impact crushers increase production capacity by reducing the need for secondary crushing in plants and lower operating costs. Primary Impact Crusher Technical Specifications MODEL: CPI – 1412 Rotor Diameter: 1,400 x 1,250 mm Maximum Feed Size: 900 x 900 mm Production Capacity: 200 – 250 t/h Motor Power: 250 kW Weight: 23,000 kg MODEL: CPI – 1415 Rotor Diameter: 1,400 x 1,540 mm Maximum Feed Size: 1,000 x 1,000 mm Production Capacity: 350 – 400 t/h Motor Power: 315 kW Weight: 28,000 kg MODEL: CPI – 1620 Rotor Diameter: 1,600 x 2,000 mm Maximum Feed Size: 1,300 x 1,300 mm Production Capacity: 400 – 600 t/h Motor Power: 2 x 250 kW Caodpfsxpkgwjx Abbea Weight: 52,000 kg Why Choose CONSTMACH Primary Impact Crushers? CONSTMACH has proven its reliability with crushing and screening equipment manufactured to high engineering standards. Our Primary Impact Crusher models are designed for different capacity and application needs. Each one undergoes tested quality control processes and offers long-lasting use. In addition, thanks to our after-sales technical support, spare parts supply, and fast service advantages, you will get a return on your investment for many years to come. If you are looking for high performance, durability, and low maintenance costs, the CONSTMACH rock crushing machine series is the right choice for you. What Do We Do at Constmach? Constmach is a leading machine manufacturer serving the construction and mining industries with a wide range of products tailored to their needs. Our product portfolio includes concrete block making machines, stationary and mobile concrete plants, stone crushing machines, stone crushing and screening plants, sand washing machines, sand making machines, asphalt plants, conveyor belt systems, jaw crushers, and mobile crushing plants. With its high quality standards, innovative production approach, and customer-focused solutions, Constmach stands out as a reliable brand in both national and international markets. Our products continue to be the preferred choice of industry professionals due to their durability, efficiency, and long-lasting performance.

Condition: like new (used), Year of construction: 2021, functionality: fully functional, saw blade diameter: 600 mm, cutting height (max.): 180 mm, feed length X-axis: 3,200 mm, The KP 900 EasyCut cut-off saw is a suitable solution for companies that process solid wood and place maximum emphasis on the quality and yield of their production. It is used to cut out defects and optimize lengths. On average, up to 900 bm/hour can be processed on this saw. (for material with a length of 4 m with 8 cuts). The saw can be operated by one or two workers, depending on the nature of the processed material. The optimization saw KP 900 EasyCut is suitable for production, which is focused on cutting accuracy, minimization of cargo waste, speed but also safety of work. The advantage of the machine is a high degree of flexibility in the input and output dimensions of the processed material. Controlling the saw is intuitive and special software facilitates programming and entering cutting parameters. KP 900 EasyCut has extended mechanization options at the output. Device functions Length optimization The function consists in minimizing waste and maximizing the yield of the assortment. The inserted material is optically scanned by the binder and automatically precisely laid out on the cross-section of the specified lengths of the selected program. The optimization system then always prioritizes the cut of the longest specified length that fits into the inserted material. The saw automatically measures the length of each inserted piece, so it is not necessary to sort the material in advance by size. In the case of marked defects, the material is optically divided into individual pieces by the binder (from defect to defect) and these pieces are again separately optimized for length. If the cut part does not meet the length of the smallest length in the program, it goes to waste. Automatic front and back cropping can be set in the selected program. Qualitative optimization - waste The essence of this function is that the operator performs a visual assessment of the cut piece and marks with two perpendicular lines the places with defects that must be cut out with special chalk. By moving the binder with special optics over the cut material, the current positions (chalk strokes) of the necessary cuts are recorded. The resulting parts in different lengths (from defect to defect) are automatically length-optimized and cut to the required lengths using the software according to the cutting program. If the cut part does not meet the length of the smallest length in the program, it goes to waste. Automatic front and back cropping can be set in the selected program. Solid and massive construction with a robust cover of the cutting area guarantees high work safety. Quality of individual components, material and processing Caedjv Iz Rnepfx Abbea ensures trouble-free operation of the equipment and a long service life in demanding working conditions. Material flow In the basic design, the saw is LEFT oriented, i.e. material flow is from right to left. Automatic loading system is a combination of sophisticated printing equipment and optics. The system is an integral part of the entrance table. It moves along a precise linear rail with bearings and ensures very precise positioning of the workpiece in the cut (up to ±0.1 mm). Thanks to the optical integrated system, the loader reads the length of the material, marked defects and quality. Clear touch 15" display

Condition: new, Year of construction: 2025, functionality: fully functional, warranty duration: 12 months, Equipment: CE marking, The Störi Mantel Leg Machine is an automatic device for producing the bottom parts of wooden pallets, also known as pallet bases or legs, which operates on the proven principle of electromechanical nailing. Codpfjubbu Ujx Abboaa The main key features that will increase your production capacity, save on operational and personnel costs, and speed up the entire pallet nailing process include, for example, the production cycle speed, the possibility of integration with other equipment such as a cross-cut saw or pallet nailing machine, convenient operation of the entire machine by a single operator, and easy maintenance and servicing. The Leg Machine can be designed with a maximum leg length of 1 500 mm or 3 000 mm.

Year of construction: 1996, condition: ready for operation (used), Built in 1996 Size max 480 x 320 mm Size untrimmed max 480 x 320 mm min 153 x 108 mm Size trimmed max 475 x 300 mm min 148 x 105 mm Product thickness max 13 mm Speed max 13.000 c/h Equipment gathering chain & feeder • 6 station gathering track & chain • 5 feeders 370 • 1 cover folder feeder stitching unit • stitching unit 390 • wire unwind device • thickness control/ plus-minus • 2 stitching heads three knife trimmer • three knife trimmer 360 Cedpfxsizi Ive Abbeaa knives • 2 sets of knives

Condition: new, power: 315 kW (428.28 HP), fuel type: electric, color: dark red, Year of construction: 2025, PRIMARY IMPACT CRUSHERS SERIES Easy maintenance with hydraulic system and safety devices • Inner body is covered with wear resistant replaceable lining plates • Body is manufactured from 20 - 30 mm steel sheet. Heat treated rotor for high capacity and speed resistance • Seamless coarse rock feeding with wide mouth opening • High rate of fine and cubic product output They are primary crushers that give maximum fine product output with high capacity especially in crushing low and medium hard stones. With the wide feeding mouth, they break the boulders by hitting the rotor, pallet and each other. Csdpfx Abjwz Nbtsbjaa They are crushers with low operating cost with replaceable lining plates, automatic lubrication system and high strength steel body.

Condition: new, Year of construction: 2024, functionality: fully functional, cutting height (max.): 160 mm, cutting width (max.): 450 mm, cutting length (max.): 6,200 mm, power: 15 kW (20.39 HP), saw blade diameter: 550 mm, total length: 8,100 mm, overall weight: 2,700 kg, table width: 450 mm, height adjustment type: mechanical, type of input current: three-phase, input voltage: 400 V, input frequency: 50 Hz, hole diameter of the disc: 80 mm, extraction nozzle diameter: 160 mm, working height: 850 mm, compressed air connection: 6 bar, warranty duration: 12 months, The basic model of the FLS technology is the FLS ECO 120. The saw is mainly used in small and medium-sized operations focused on various wood processing, but also non-wood materials. The FLS ECO 120 single-spindle saw significantly increases work efficiency and material yield (by 10-15%) and can process prisms, beams, prisms and large-area material. The input material can be plastered, dimensioned, formatted, cut to length and slats can be produced. The maximum cutting height is 120 mm, optionally 160 mm. The saw can be operated by one worker. Cajdoubbubepfx Abbea The machine complies with the stringent occupational safety requirements of the relevant EC regulations and directives. The infinitely variable blade feed and stroke control guarantees a clean cut and high cutting performance. Thanks to the "ProLock" quick-release system, saw blade replacement is easy and, above all, safe. The saw carriage is equipped with guide and side rollers that ensure optimal guidance of the floating unit during cutting without unnecessary vibrations. The upper pressure plate and the wooden adjustable stop ensure a firm fixation of the material during cutting and thus eliminate unwanted movement. The FLS technology is unique in its quick and easy adjustment via ergonomically positioned touch panel controls. Cut width values are entered manually or by using the basic Absolut program or the optional Chain and Optim programs. The cutting path is displayed on the material by a laser beam and then guided longitudinally by a sliding saw blade. The FLS can be used to cut prisms, squares, beams and large-area material. The input material can be plastered, dimensioned, formatted, mitred and mitre cut, grooved or cut into sections and slats. Manufacturers of grout and solid furniture or staircases will find their own. The machine can also be used for cutting non-wood materials such as PUR/PIR panels, plastic materials, sandwich, aluminium or cement board.

Year of construction: 1997, condition: good (used), Machine number: 91.05666 Built in: 1997 Cajdek D Almepfx Abbja Size: max 480 x 320 mm Size untrimmed: max 480 x 320 mm, min 153 x 108 mm Size trimmed: max 475 x 300 mm, min 148 x 105 mm Product thickness: max 13 mm Speed: max 13.000 c/h Number of heads: max 6 Equipment gathering chain & feeder • 5 station gathering track & chain • 4 feeders 370 • 1 cover folder feeder 1529 stitching unit • stitching unit 390 • wire unwind device • thickness control/ plus-minus • 2 stitching heads three knife trimmer • three knife trimmer 360 knives • 2 sets of knives • Doppelnutzeneinrichtung • Betriebsstunden: 34.088h

Condition: new, Year of construction: 2024, functionality: fully functional, power: 11 kW (14.96 HP), saw blade diameter: 600 mm, feed length X-axis: 6,200 mm, overall weight: 2,300 kg, height adjustment type: pneumatic, type of input current: three-phase, input voltage: 400 V, input frequency: 50 Hz, hole diameter of the disc: 80 mm, extraction nozzle diameter: 120 mm, working height: 900 mm, compressed air connection: 6 bar, warranty duration: 12 months, The KP 900 Automat is a suitable solution for material preparation in the production of pallets and other wooden packaging products. On average, this saw can process 27-30 m3 of pallet cross-section per shift (8 hours) or about 20 thousand pieces of blocks for pallet production, depending on the cross-sectional dimensions of the processed material. The saw can be operated by one or two workers, depending on the nature of the material being processed, which is manually loaded into the machine. Casdpjubbtksfx Abboa Basic cutting modes 1. Manual mode Each cut length is set by moving the material using the buttons on the panel, or by setting the length value on the control panel dial. Start the cut by pressing the button on the display. This method of use is suitable for single sequential cuts. 2. Automatic mode a) Set one cut dimension for the entire length of the input material. When the pedal starts cutting, the entire material is automatically cut to this set value. When the cut is complete, the loader will go back to the preset value of the input material length. This mode is suitable for the production of pallet cubes. The advantage is the quick changeover between values when the input material changes frequently. b) Set the desired combination of cut dimensions for the entire length of the input material. When the pedal starts cutting, the entire material is automatically cut to these length combinations. When the cut is complete, the loader will go back to the preset value of the input material length. Up to 10 programs with 10 lengths can be stored in the machine memory. Programs are very easy to overwrite, edit, insert or delete. Use this mode to achieve high material yields and is particularly useful in the production of cuttings for a wide range of packaging products. In automatic mode, automatic front and back trimming can be set. In the basic version, the saw is LEFT orientation, i.e. the material flow is from right to left. An automatic loading system is included in the basic configuration of the saw. It is a pusher device that moves on a precision linear rail with bearings. This design ensures long life of the linear guide and very precise positioning of the workpiece in the cut. The integrated side and top pressure ensure a firm fixation of the material during the cutting process, both to the work table and to the back support. This ensures that the cut is always precise, perpendicular and avoids unwanted material movement. The clear LCD touch screen allows easy and comfortable operation of the machine. The individual controls are clearly visible, do not tire the operator's eyes and provide a perfect overview. Maximum ergonomics and designed software ensure the operator complete control over the machine. A work table at the infeed before the cut allows the operator to conveniently sort and prepare the material, which is then moved to the loading area. This eliminates downtime in the operation of the saw and strenuous material handling. The table has a tilt of 8° and is equipped with a safety flap at its end to prevent accidental pushing of the material out of the operator's reach. The basic fixed table at the outlet behind the cut is two metres long and partly under the cutting area cover. The operator can remove the cut material in complete safety, without being endangered by any cuttings, chips or risk of injury from the cutting wheel. The inclination of the table is 8°.

Year of construction: 1996, condition: ready for operation (used), Built in 1996 Size max 480 x 320 mm Size untrimmed max 480 x 320 mm min 153 x 108 mm Size trimmed max 475 x 300 mm min 148 x 105 mm Product thickness max 13 mm Speed max 13.000 c/h Equipment gathering chain & feeder • 5 station gathering track & chain • 4 feeders 370 • 1 cover folder feeder 1528 stitching unit • stitching unit 390 Csdpfx Aed Eg Tuobbjaa • wire unwind device • thickness control/ plus-minus • 2 stitching heads three knife trimmer • three knife trimmer 360 knives • 2 sets of knives

Year of construction: 2005, condition: good (used), Technical Data: Size: max 480 x 320 mm Sizes untrimmed high folio lap: max 480 x 320 mm min 105 x 115 mm with Accessories 90 x 80 mm Sizes untrimmed low folio lap: max 480 x 300 mm min 105 x 125 mm Mechanical Speed: 21" chain pitch 14.000 c/h Power consumption: max 11 kW Pressure-vacuum pump depending on configuration Compressed air (to be supplied by purchaser) depending on configuration 6 bar Equipment: Gathering chain & feeder: · 8 Station gathering track Feeders: · 5 Feeders 370 Cover folder feeder: · 1 Cover folder feeder 1529 Stitching unit: · 1 Stitching unit 390 · 1 18" inch chain pitch · 1 Transfer right · 1 Wire unwind device · 1 Thickness control/ plus-minus · 1 Oblique sheet control Stitching heads: · 2 Stitching heads HK 75 Three knife trimmer: Cajdpsl I Eypefx Abbea · 1 Three knife trimmer 449 Knifes: · 2 Sets of knives Standards: · 1 Standard accessories · 1 Standard tools Condition: · working condition Availability: · immediately · Machine can be visited in production Optional equipment (not included!): · additional feeders · double production device · compensating stacker · card gluer · inserting machine · inkjet systems All technical data is for information purposes only! Although the technical information is mostly taken from manufacturers documents, no guarantee can be given for correctness due to e.g. undocumented changes of the equipment. By no means are these values intended to be binding or part of the contract.

Year of construction: 1996, condition: ready for operation (used), Built in: 1996 Size max: 480 x 320 mm Size trimmed: 480 x 320 mm Casdpfjd N D Ntex Abbja min 153 x 108 mm Size trimmed: max 475 x 300 mm min 148 x 105 mm Product thickness: max 13 mm Speed: max 13.000 c/h Number of heads: max 6 Equipment: gathering chain & feeder three knife trimmer

Year of construction: 1997, condition: ready for operation (used), 25276F Müller Martini Prima Saddle stitchers with feeder and trimmer Casdpfxed Nvtps Abboa Machine number 91.06606 Built in 1997 Size max 480 x 320 mm Size untrimmed max 480 x 320 mm min 153 x 108 mm Size trimmed max 475 x 300 mm min 148 x 105 mm Product thickness max 13 mm Speed max 13.000 c/h Number of heads max 6 Equipment gathering chain & feeder • 9 station gathering track & chain • 8 feeders 370 • 1 cover folder feeder 1529 stitching unit • semko • 2 stitching heads three knife trimmer • three knife trimmer 360 knives • 2 sets of knives