Used Reel for sale (852)

Condition: as good as new (ex-display), Year of construction: 2025, High-pressure cleaner, high-pressure flushing unit, high-pressure built-in unit on hot-dip galvanized and painted high-quality steel frame with forklift tines, suitable for installation in service vehicles. PTC Moses 60/200, 75/150, 30/300, 75/210XL, 84/190XL, 102/150XL and 50/300XL – similar to, but not Feierabend & Fock, Karo, Leistikow, Müller, Rioned, Rockstroh, Rom, Rowo,... The following models are available: Moses 60/200 | 60 l/min. at 200 bar | Engine: Yanmar 3TNV88C 27.5 kW Stage V Moses 75/150 | 75 l/min. at 150 bar | Engine: Yanmar 3TNV88C 27.5 kW Stage V Moses 30/300 | 30 l/min. at 300 bar | Engine: Yanmar 3TNV88C 27.5 kW Stage V Moses XL 75/210 | 75 l/min. at 210 bar | Engine: Yanmar 4TNV88C 35.5 kW Stage V Moses XL 84/190 | 80 l/min. at 190 bar | Engine: Yanmar 4TNV88C 35.5 kW Stage V Moses XL 102/150 | 102 l/min. at 150 bar | Engine: Yanmar 4TNV88C 35.5 kW Stage V Moses XL 50/300 | 50 l/min. at 300 bar | Engine: Yanmar 4TNV88C 35.5 kW Stage V DIMENSIONS / WEIGHT: Dimensions of models with 27.5 kW without water tank LxWxH: approx. 910x1,220x1,200 mm Dimensions of models with 35.5 kW without water tank LxWxH: approx. 1,240x1,310x1,300 mm Empty weight without water tank: approx. 550-700 kg HIGH-PRESSURE PUMP: - Manufacturer: HPP - Model: CLW for standard models and ELS for XL models - Flow rate: max. 102 l/min. - Operating pressure: max. 300 bar Bodpfjf Ar Exex Abfedi ENGINE: - Manufacturer: Yanmar - Model: 3TNV88C and 4TNV88C - Fuel: Diesel - Cooling: Water - Cylinders: 3 and 4 - Max. power: 37-48 hp (27.5-35.5 kW) - Max. engine speed: 3,600 rpm TRANSMISSION: Pulley and belt CONTROL PANEL: - Start button - Hour meter - Electronic fuel gauge - LED indicator for oil temperature - LED indicator for low lubricating oil pressure - LED indicator for clogged air filter - LED indicator for speed measurement - LED indicator for generator - LED indicator for spark plugs - Emergency stop button ELECTRICAL CONTROL: - Winding/unwinding of hydraulic hose reel; - On/off bypass; - Speed control +/-; - Emergency stop button; - Switching to remote control; INSTALLED ALARM: - Low water level protection against dry running of the high-pressure pump with automatic shut-off function. SAFETY AND PRESSURE REGULATING VALVES: - The unit is equipped with a safety valve, a pressure regulating valve and a pressure gauge. HIGH-PRESSURE HOSE REEL: - Type: hydraulically operated hose reel, swiveling by 180° - Material: Stainless steel - Capacity: max. 100 m ½“ - Hose: 80 m ½“ high-pressure hose (included) - Hose guidance: manual WATER SUPPLY HOSE REEL: - Type: manual - Material: Stainless steel - Capacity: max. 35 m ¾“ low-pressure hose - Hose: 35 m ¾“ low-pressure hose (included) FUEL/OIL TANK: - Fuel: approx. 13 l - Oil: approx. 13 l INCLUDED IN DELIVERY: - Multifunction remote control IMET; - On / Off engine; - On / Off bypass; - Speed control +/-; - Winding / unwinding of hydraulic hose reel; - Emergency stop button; - Battery charger for remote control; - 500, 800 or 1000 l water tank;

Condition: excellent (used), Strapping machine SIVORON / GIGANT Model S 669 L integrated strap reel belt width 6/ 9/ 12/ 15.5 mm Electrical connection 230 V, 50 Hz Adjustable belt tension Temperature welding system idle rollers in the work table mobile with cord wheels Bedpouxm Haofx Abfodi Dimensions L x W x H = 1460 x 600 x 1600 Weight approx. 70 kg Note for used machines: - Subject to errors in technical specifications and prior sale. - Prices quoted are ex location - free loading! - The machines have been cleaned and functionally tested. - All machines are purchased as seen without any warranty. The buyer is free to inspect the machines on site. - Special agreements are only possible in written form. (Inquiries will only be answered with your address and telephone number).

Condition: as good as new (ex-display), Year of construction: 2023, machine/vehicle number: AH00004861, functionality: fully functional, operating pressure: 6 bar, temperature: 15 °C, NEW OPTIONAL SEMI-INDUSTRIAL EDGEBANDER SEMI-INDUSTRIAL WITH SIMPLIFIED CONTROL PANEL Make: SCM Model: K360 T-ER1 Year: 2023-2024 CE AH00004861 MACHINING CAPACITIES : - Panel height: 8 - 50 mm Thickness: 10 to 45 mm with use of rounding tool - Length of panel to be clad: 210 to 2500 mm - Minimum panel width: 90 to 1100 mm - Roll edge thickness: 0.4 to 3 mm without rounding max 3 mm with rounding - Strip edge thickness: max 6 mm without rounding max 3 mm with rounding - Edge width: panel thickness +2mm on each side - Drive (feed speed): 11 m/min - Workpiece spacing: 600 mm - Part protrusion from transfer chain (panel protrusion): 30 mm MACHINE COMPOSITION : - Reel table - Predisposition to receive an air-cushion table - Work table with front extension - Drive belt: chain - Non-stick spray unit - Edge straighteners (2 routers) rpm Diamond tools - Gluing unit with interchangeable tray Pneumatic pre-cutter Marouflage (pressing) with 3 rollers (1 motorized) - Chop-saw butt-cutting unit - Nesting copying top/bottom trimming unit - Rounding unit - Radius scrapers - Straight scrapers - Edge finishing spray device (Nebulization) - Textile polishing brush station - General power supply: 400v. Three-phase+N+T 50Hz Options installed on the machine : - 10.09.98 European safety standards (CE standards) Bsdpfx Abjttakhsfodi - 63.05.29 Provision for an eventual air cushion plane at machine inlet - 62.15.02 "Nesting" copier kit - 62.12.03 "AAR" anti-stick group - 62.12.61 Nebulization device for edge finishing - 62.14.55 Diamond tools H=64 on grinding group - n.2 cuts - 62.15.06 "SGP-E" glue pot - Instead of the standard glue pot - 62.15.04 "RC-N" glue scraper group - 62.12.12 "SP-V" brush group Machine available : in stock

Condition: good (used), Year of construction: 2013, functionality: fully functional, machine/vehicle number: 3520130500485, operating pressure: 150 bar, total length: 406 mm, high-pressure hose length: 15,000 mm, total height: 1,016 mm, total width: 406 mm, input voltage: 220 V, fuel: electricity, overall weight: 38 kg, pressure (max.): 165 bar, The Nilfisk Poseidon 3-30 XT is equipped with a hose reel and two high-pressure lances. Bdjdszl Tu Aspfx Abfoi The integrated detergent injector and the suction hose on the rear of the unit enable quick and easy application of the detergent. The rotary knob for detergent dosage is located in the same position. Technical specifications: Pressure: max. 165 bar Cleaning performance: 3.0 Max. inlet temperature: 60 degrees Weight: 38 kg

Condition: used, Year of construction: 2007, Overview This complete PET bottling line was built by leading European manufacturers including Sidel, Sacmi and Sarcmi. It is designed for still and sparkling water and is also suitable for soft drinks. With a nominal output of 19,000 bottles per hour for 0.5 L and 16,000 bottles per hour for 1.5 L, it covers the full process from preform blow moulding through filling, labelling, shrink wrapping and palletizing. The core of the line is a Sidel SBO Universal 14 blow moulder (2007) feeding a Sarcmi Azzurra 70-14 isobaric filler and a Sacmi Opera 200 RF rollfed labeller. Technical data - Line type: Complete PET bottling line - Different manufacturers: Sidel, Sarcmi, Sacmi, Zalkin, Zambelli, Comag, Acmi, Robopac - Years of manufacture: 1986 - 2019 - Nominal output: 19,000 bph (0.5 L); 16,000 bph (1.5 L) - Product: still and sparkling water, also suitable for soft drinks - Container: PET bottles 0.5 L and 1.5 L - Cap: Alaska PCO 1881 - Label: OPP rollfed - Packaging: shrink film - 0.5 L 3x2 and 4x3, 1.5 L 3x2 - Palletizing: Euro pallet 800 x 1200 and 800 x 600 Scope of Delivery - Blow Moulder | Sidel | SBO Universal 14 | 14 cavities; incl. Lanfranchi preform tilter, hopper and air recovery system | 2007 - Air Conveyors | NTS | Double chamber, approx. 60 m, 2 air fans - Filler | Sarcmi | Azzurra 70-14 | 70 isobaric filling valves, pitch 110 | 1988 - Capper | Zalkin | 14 capping heads | 1988 - Saturator | Rivi Eng | Carborivi | 30,000 L/h | 1986 - Labeller | Sacmi | Opera 200 RF | OPP rollfed, 18 plates, non-stop automatic reel change | 2011 - Cap Ink Marker | Linx | 8900 | marking on bottle cap | 2019 - Shrink Wrapper | Zambelli | LFT70 | single track with 1-to-4 track channelizer | 2004 - Handle Applicator | Comag | H 65/1 | cardboard handle, single track | 1999 - Palletizer | Acmi | Rasar P130 | double-head, incl. pad and pallet magazines | 1996 - Pallet Wrapper | Robopac | Genesis | ring wrapping, pallet presser, waterproof covering | 2000 Bjdpfx Ajzlqzmjbfedi - Conveyors | Procomac / Comag | bottle and pack conveyors, SEW / Selpee motors, Procomac cabinet with Pro-face touch panel Condition Used line, well maintained with extensive annual overhauls by the manufacturers. Currently still installed and under power. The line can be viewed on request. Availability Available from 12 October 2026. Location: Italy.

Condition: used, mileage: 229,050 km, power: 140 kW (190.35 HP), first registration: 12/2010, fuel type: diesel, overall weight: 5,000 kg, color: red, gearing type: mechanical, emission class: euro5, number of seats: 3, total length: 6,945 mm, total width: 1,993 mm, total height: 2,815 mm, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), parking heater, Internal vehicle number: 4841 ----Why autonext? Over 400 cars and commercial vehicles immediately available. One of the largest vehicle exhibitions in the region. Over 1,000 satisfied customers annually - top customer ratings. Attractive financing and trade-in options available. Complete vehicle range available at autonext. Mobility made easy. WhatsApp Chat: ### Offer: Financing from 4.99% ### ----Get a clear impression now: Use the YouTube link to view the vehicle completely, inside and out: Bjdpfx Abszkpbiefodi 1st owner, German vehicle, non-smoker vehicle Complete and consistent service history exclusively at Mercedes Benz Permissible total weight: 5,000 kg Engine: 3.0 L - 140 kW V6 Twin tires Manufacturer: Rockstroh Fahrzeugbau GmbH Type: Drain-Jet 100 PE water tank: 600 - 1,200 l Pump drive: Auxiliary drive (PTO) High-pressure system: Safety valve Application area: up to DN 350 Inverter "Flamezum" 4000W/8000W Self-propelled work machine: IPEK SPEZIAL TV Remote control Sewer cleaning nozzles Additional hose reel Backup power supply "UPS" Tool rack "Sortimo" 230-volt sockets Battery charger Trailer hitch Rear view camera Cruise control Regulated air conditioning (Tempmatik) Auxiliary heater Seat heating Sliding door on both sides Parameterizable special module Sliding door assist Comfort driver's seat LED work lights in the cargo area ---- Special equipment: * Radio preparation * Two-way speakers at the front * Storage compartment in the headliner of the driver's cab * Hill start assist * Trailer hitch: fixed ball head * Trailer socket 13-pin * Antenna for GSM, GSP and UMTS networks * Outside temperature display * Additional battery (reinforced) * Roof control unit with reading spot on driver/passenger side * Roof light in the cargo area with door contact * Anti-theft alarm * Generator 180 A * Cruise control * Gearbox lock for auxiliary drive * Rear door (opening angle 270 degrees) * Folding cover for storage compartment * Regulated air conditioning (Tempmatik) * Fog lights * Auxiliary drive 2 B with reduction gear * Parameterizable special module * Sliding door cargo/passenger compartment left * Seat cover / upholstery: artificial leather (driver's cab) * Seats in the driver's cab: driver's seat heated * Seats in the driver's cab: driver's comfort seat * Stabilizer bar at the rear * Reinforced stabilizer bar at the front * Fuel level sensor for auxiliary heater * Separating relay with additional battery * Rear door step * Rear wall lining * Fleece battery 95 Ah * Preparation for transmission oil cooling * Thermal protection glazing (windshield with band filter at the top) * Sliding door assist left * Sliding door assist right Standard equipment: Body/Structure: Standard high-roof van, rear wing doors raised and high roof, 3rd brake light, Adaptive brake light, Driver airbag, Anti-lock braking system (ABS), Drive type: Rear-wheel drive, Washer fluid level indicator, Exterior mirrors electrically adjustable and heated, both, Exterior mirrors with integrated turn signal, Brake assist, Braking system with ABS+ASR, Headliner in the driver's cab, Electronic stability program (ESP), Electric windows 2-way, 6-speed transmission - TSG (Eco Gear), Lockable glove compartment, Child safety lock, Fuel filter with water level sensor, Fuel tank: main

Condition: used, Year of construction: 2016, Overview Bodjzk H Nkopfx Abfodi This CEEM TSS-1845 is a fully automatic side-seal shrink-wrapping machine with an integrated shrink tunnel, built in 2016. Products are fed on the conveyor, wrapped in transparent shrink film with a continuous side seal, and passed through the heat-shrink tunnel to form a tight, retail-ready transparent pack. The machine handles single items as well as grouped products. The side-seal unit is manufactured by Alpha Pack Europe (Italy) as model APSS-5022 and supplied under the Spanish CEEM brand (Grupo CEEM Packaging S.A., Elche). A constant-temperature thermal system provides uninterrupted sealing; product changeovers are made simply by turning the hand-wheels, without changing product guides, and product-length sensors allow automatic length control via the touch-panel control. The machine is still installed and under power and can be inspected on site. Technical data - Manufacturer: CEEM - Grupo CEEM Packaging S.A. (Elche, Alicante, Spain) - Model: TSS-1845 (side-seal unit OEM: Alpha Pack Europe APSS-5022) - Year of manufacture: 2016 - Machine type: fully automatic side-seal shrink-wrapping machine with shrink tunnel - Applicable film: POF / PE / PVC, thickness 0.05 - 0.08 mm - Max. sealing width: 500 mm - Max. product height: 220 mm - Packing speed: 30 - 45 packs/min - Conveyor speed: up to 30 m/min - Film reel: outer Ø up to 400 mm, core Ø 75 mm - Power: approx. 3 kW, 380 V - Compressed air: 5 - 6 bar - Weight: approx. 850 kg (side-seal unit; shrink tunnel additional) - Side-seal unit dimensions: approx. 2,100 x 1,960 x H 1,900 mm (excl. tunnel) Equipment - Automatic side-seal sealer with motorized film unwind and continuous side sealing - Heat-shrink tunnel with adjustable temperature control - Touch-panel control, hand-wheel format changeover, product-length sensors - Infeed conveyor Condition Used - in very good, clean condition; still installed and under power at the current site and available for inspection on request. Availability Immediately. Location: Spain. Dismantling, handling and truck loading can be quoted on request (EXW). The machine can be visited on request.

Condition: used, mileage: 372,000 km, power: 300 kW (407.89 HP), first registration: 02/2012, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, next inspection (TÜV): 01/2027, color: white, gearing type: automatic, emission class: euro5, Equipment: ABS, air conditioning, navigation system, Mercedes Benz 1841 L Aluminum rims Air suspension Additional headlights German vehicle 1 owner Air conditioning Camera ESTERER superstructure Hatch doors Top and bottom filling 2 chambers Remote control Printer Hose reel at the rear right Center reel between the cab and the tank Sennig computer and pumps etc. Bdodpfx Abozywr Usfoi

Condition: used, mileage: 169,232 km, power: 235 kW (319.51 HP), first registration: 04/2008, fuel type: diesel, empty load weight: 11,750 kg, maximum load weight: 6,250 kg, overall weight: 18,000 kg, axle configuration: 4x2, wheelbase: 3,900 mm, brakes: engine braking, color: orange, driver cabin: day cab, gearing type: mechanical, emission class: euro4, suspension: steel-air, number of seats: 2, operating hours: 6,694 h, Equipment: ABS, air conditioning, cabin, crane, differential lock, immobilizer system, onboard computer, power assisted steering, seat heater, soot filter, traction control, * German vehicle * First owner * Documentation available * Original 169,232 km * Only 6,694 operating hours * Previously owned by a municipal authority * Condition: see photos * Müller Jetmaster F75V * Including remote control * 7,500-liter water tank * High-pressure flushing vehicle for sewer and pipe cleaning * Versatile * Pipe cleaning up to DN 150 * Sewer cleaning up to DN 800 * Large-profile cleaner for pipes larger than DN 800 Bedpjzgxaajfx Abfsdi * Landfill and culvert cleaning * Industrial cleaning * Special applications * High-pressure three-plunger pump Uraca P 3-45/65 * 340 liters/minute possible * 140 bar working pressure * 87 kW * 552 Nm torque * Fully equipped electric hose reel with DN 25, extendable/retractable * Fully equipped electric hose reel with DN 19 high-pressure hose * Additional small reel with DN 19 for high-pressure hose lance * Müller swivel crane with cable winch * 1,000 kg load capacity * Various storage compartments * Work lights * Rotating beacons * On MAN TGA chassis * Long, comfortable cab with sliding doors * Air conditioning * Refrigerator * 2 air-suspended comfort seats * Each with seat heating * 8-speed manual transmission * Electric windows * Electric, heated mirrors * Cruise control * Electric engine brake * Radio cassette * Sunroof * Leaf spring - air suspension + raising/lowering * Wheelbase 3.90 m * Gross vehicle weight 18,000 kg * Unladen weight 11,750 kg * Payload 7,250 kg If a new TÜV inspection is desired, we will be happy to provide you with a quote from our partner workshops. Our offer generally does not include a new TÜV inspection, a new DGUV, a new SP, or a new UVV. You can find more trucks on our website at: We speak the following languages: German, English, Polish, Turkish Note: We offer and strongly recommend an inspection and examination of the goods so that the buyer does not have any false impressions about the condition and suitability. Inspection and examinations are possible and expressly desired at any time by appointment. All information is without guarantee. We are not liable for errors and incorrect information in the offer. The buyer is obliged to independently verify the condition and equipment of the goods/vehicles. Subject to changes, prior sale, and errors.

Condition: new, functionality: fully functional, machine/vehicle number: HBWW1140, color: yellow, Year of construction: 2026, fuel type: gasoline, operation weight: 1,626 kg, Bowser Washer mobile pressure washer The improved Bowser Washer mobile pressure washer from the British company FuelProof is EU/RDW approved and equipped with a highly manufactured 1140-liter polyethylene tank, which is mounted on a robust galvanized chassis. Mounted on the chassis are the tank and the high-pressure unit with hose reel with standard 20-meter hose. These are protected by a tubular frame. Furthermore, this pressure washer is equipped with a Honda GX390, 11.7 hp gasoline engine with electric start. The pressure washer gives 15 ltr/min, 200 bar. This machine is expandable into a special sewer unit, making it easier to clean and flush sewers. In short, a versatile unit with an extensive pallet of applications and possibilities! Bsdpfxovf Ibuo Abfedi

Condition: used, functionality: fully functional, power: 176.52 kW (240.00 HP), fuel type: diesel, Year of construction: 1996, FIRE ENGINE (CREW VEHICLE) MLF MAN 10.224: Year of manufacture: 1996 Crew: 9 Water tank: 1,200 litres Foam tank: 120 litres Pump: 1,600L/min at 8 Bar Turbo foam proportioner ZR 400 Bjdow U Dffepfx Abfsdi Extinguishing water tank with 1,200 litres and 120 litres of foam Rapid intervention hose reel Three equipment compartments on each side of the vehicle. All information provided to the best of our knowledge and belief, without guarantee of completeness or accuracy. This advertisement is for informational purposes only and does not constitute an offer. Subject to prior sale!

Year of construction: 2022, condition: good (used), Manufacturer / Model: Grafotronic DCL2 550 Serial Number: 220520G Web Width: 550 mm Year of Manufacture: Location: Germany Condition: Used – in production CE Marking: Yes _____ Main Configuration Unwinder Module: • Max. roll Ø 1000 mm / weight 430 kg • Ultrasonic sensor and web guide ±15 mm • Splice table with clamps, servo brake, reel lift Flexo Printing / Coating Module (10–24" repeat): • GEW E2C UV dryer • Ceramic anilox 400 l/cm – 5.5 cm³/m² • Stainless steel ink pan 1.2 L, reverse-angle doctor blade • Re-register drive for overprinting • Max. speed 100 m/min – tolerance ±0.1 mm Die-Cutting Module (10–24" repeat): • Servo register system, anvil & support roller • Contact matrix rewind, stripping bar • Delam/Relam before die-cutting (limit 70 m/min) • Max. speed 250 m/min, tolerance ±0.1 mm Bjdpfx Asxq A Hlsbfsdi Inspection & Slitting Section: • Missing Label Detection (MLD) up to 220 m/min • Automatic Sci-Fi knife system (12 sets) • Vacuum edge-trim removal • Auto-set under/back scorer (2 knives) Semi-Automatic Turret Rewinder: • 2 × Ø 600 mm rolls • Semi-automatic cutting and push-out system • Label & meter counters • Core diameters 40–76 mm Additional Equipment: • Anti-static brush • Tablet with housing and accessories • ERP interface • Crane for magnetic cylinders Materials: • Foil 30–250 µm • Paper 100–250 µm _____ General Condition: Overall in good working order. According to the operator, two UV units require lamp replacement, which represents a minor cost. All other modules are fully functional.

Condition: used, functionality: fully functional, first registration: 03/1997, fuel type: diesel, overall weight: 14,000 kg, axle configuration: 4x2, color: red, gearing type: mechanical, Year of construction: 1997, Equipment: differential lock, From our immediately available stock of used vehicles, we offer you: Bdedpoxd Unbsfx Abfoi Fire Engine LF 16/12 on MAN 14.222 with Differential Lock General Data: • Year of manufacture: 1997 • Mileage: approx. 31,000 km • Permissible total weight: 14,000 kg • RAL 3000 (fire red) Chassis: • MAN 14.222 4x2 with differential lock and 222 HP • Diesel engine with manual transmission and power steering • Tow bar Cab: • Crew cab (1:8) in RAL 3000 (fire red) • Holders for 2 breathing apparatus sets facing away from direction of travel • Auxiliary heater Body: • Manufacturer: Ziegler • LF 16/12 body in accordance with DIN • Two spacious side equipment compartments per side • Folding steps for side compartments • Mounts for standard equipment • Bracket for hose reel • Mountings for 2 additional breathing apparatuses • Storage for extension and hook ladders on the roof Vehicle pump / Extinguishing agent tank: • Ziegler FPN 16-8 centrifugal fire pump • Output: 1,600 l/min at 8 bar • Water tank: 1,700 l • Foam tank: 400 l Firefighting equipment: • Rigid quick-attack line (top of G6 compartment) • Roof monitor • Built-in foam proportioner Safety and Lighting: • 3 blue rotating beacons • Electronic siren system • Lighting for crew and equipment compartment • Additional spotlights • Optional hygiene board and reversing camera All details are stated to the best of our knowledge and belief; no guarantee for completeness or accuracy. This advertisement is intended solely for informational purposes and does not constitute an offer. Subject to prior sale!

Condition: new, In addition to standing a PDF document, see the description of positions - Prices on request! RUCHSER standard offer with layout for a wooden window production with being milled Glass bar and screwed corner joints. Daily capacity approximately 15 Window Manufacturing consisting of: Item 1.0 - Item 107 850 000 RU-PWD-H1600/130/4 profile carriage double-sided Length 1600 mm, width 850 mm, height 2140 mm for horizontal position round and transport of Profile sections. 12 support arms each column welded to the column, 2 adjustable center column, clear spacing of the support arms 130 mm, Depth of the support arms on each side 400 mm, Support arms covered with felt, with 4 plastic swivel castors, diameter 150 mm, of which 2 with stop means. Item 2.0 - Item 0150001 RU-M rotation - tilting table manually tiltable bearing surface 1300 x 1400 mm, with 4 plug extension 1000 mm long, including tool tray without weatherboard- ausspaarung. Item 2.1 - Item 5009-1 2 trays with 2 drawers (for RU-4, RU-2/4) Item 2.2 - Item 5062-1 Extract left and right 500 mm and up to 7000 mm folded down with one support leg Item 2.2 - Item 5012-1 Hinged extension tubes Length 700 mm (max. 3 pairs) Item 2.4 - Item 6125-2 Corner mounting fixture AoE attacks rectangular pneumatic lowered with clamping unit for 2 profiles mounted on RU-M Item 2.5 - Item 2069-1 tilting instead of manually, pneumatically operated Item 3.0 - Article 10.782 million RU-EW-2S two-sided vehicles in stock Storage capacity max. 36 piece sash L - shaped screw, length 1200 mm, Depth 800 mm, height 2200 mm, edition of Holme felted, 4 swivel castors, 2 with brakes Item 4.0 - Item 6600000 RU-KWI-1000 Commission cart unladen be nested, Length 1120 mm, width 1100 mm, working width 850 mm, height 1900 mm, Plant height 1500 mm, bearing capacity 750 kg mobile on 4 plastic castors, Diameter 150 mm, 2 with Stop device, 2 drawers on the left and right Bjdpfx Asytx Ursbfedi each 350 mm in length, max. 1800 mm and Height max. 2100 mm Item 5.0 - Item 740-300 RU-DH-F2 double reel cart for 2 rolls to roll size 620 x 350 mm (without coil) to roll size 800 x 350 mm (with coil) with 4 swivel castors, 2 with stop device Item 5.0a alternative to Item 5.0 - Item 744-200 RU-DH-F4, double coiler car for 4 wheels to roll size 620 x 350 mm (without coil) to roll size 800 x 350 mm (with coil) with 4 swivel castors, 2 with stop device Item 6.0 - Article 7.36 million RU-BW-1200-fog Cart with 16 divisions, length 1200 mm, Width 700 mm, height 1100 mm, with 2 shelves, mobile on 4 Plastic castors with a Diameter of 125 mm, 2 with stopper Item 7.0 - Article 10.0092 million RU-FMOG / K wing mounting rotary tilting table * for wings with attached bar and milled glass Bolt on corner joint. Rotary-tilting table with pneumatic tilting device and 6 piece sliding vacuum suction cups. Adjustment range in width from 4...

Condition: reconditioned (used), Double-side Sizing-Milling & Edge Banding - First (1st pass) machine in a line Edges (tape) thickness in rolls (min/max) mm 0,3 / 3 Panels thickness (min/max) mm ?? / ??? Working width (min/max) mm 236 / 1300 - Working length (min/max) mm 250 / 5600 Numerical Control / Software ICOS Open (prepared for ZIMBA) Adjustable feeding speed (m/min ) 10 - 70 (Master & Slave) Bdsdpfoz Eka Tox Abfsi Safety and sound-proof enclosures/cabins SIZING PART (for each side): Hogging Units 75.34 (2 x Kw 12,5) adjustable by N.C., with Hydro-Format-tool-system Spraying unit (Anti-sticking liquid) EDGE-BANDING PART (for each side): Glueing Unit (P.U.R. Glue + Quick Melt unit) 04.1570 (with Nordson VersaPUR) Pressure zone (adjustable by N.C.) Edge coils supporting unit (No. 12 reels) with servo material infeed Servo material end-trimming knife to cut the reel material Rough Trimming (Milling) unit 08.0555 HS/LS1 (2 x Kw 1) Fine Trimming (Milling) unit (Multi-profile, adjustable by N.C.) 08.0587 HS/LS1 (2 x Kw 0,66) Spraying Unit (for sliding liquid) Profile Scraping unit (Multi-profile, adjustable by N.C.) 08.0516 HS/LS1 Glue scraping unit 08.522 Buffing unit 08.617-2 (2 x Kw 0,18) - Spraying Unit (for sliding liquid) No. 1 Milling grooving unit 75.34 (Left-Hand) adjustable by N.C. (1 x Kw 8) Hydro-Format-tool-system No. 2 Milling grooving unit 75.34 (Right-Hand) adjustable by N.C. (2 x Kw 12.5) Hydro-tool-system

Condition: used, Year of construction: 2002, Overview This SMI SK 452 T is a shrink packer for PET bottles, built in 2002 by SMI (Italy). It collates bottles into pack formations, wraps them in shrink film and shrinks the film in the integrated heating tunnel, at an output of up to 30,000 bottles per hour. It handles 0.5 l, 0.75 l, 1.0 l and 1.5 l bottles in 3x2 packs and 0.5 l bottles in 4x3 packs, and has a pass-through mode for running bottles unpacked. The wrapping section is fully enclosed by safety guarding with viewing windows. The machine has been running as the shrink packer of a PET bottling line for water and is still installed and under power, so it can be inspected in production. Bedpfez Elkyex Abfjdi Technical data - Manufacturer: SMI (Italy) - Model: SK 452 T - Year of manufacture: 2002 - Machine type: shrink packer for PET bottles with integrated heating tunnel - Output: up to 30,000 bottles/hour - Pack formats: 0.5 l (3x2 and 4x3), 0.75 l (3x2), 1.0 l (3x2), 1.5 l (3x2) - Pass-through mode for unpacked bottles - Location: Germany Equipment - Multi-lane bottle infeed with lane dividers - Pack collating and film wrapping unit with film reel holder - Integrated shrink tunnel (heating oven) - Full safety enclosure with viewing windows and emergency stops Condition The machine is still installed and under power and in regular production. It can be visited and inspected in operation on site. Availability The machine is available from 31 October 2026. It is located in Germany.

Condition: used, Year of construction: 2006, machine/vehicle number: ET236, Used SACMI OPERA labeller machine 200 RFTechnical Specifications & Performance DataThis rotary labeling machine is engineered for high-speed wrap-around labeling with hot-melt technology. Manufactured by Sacmi, the Opera 200 RF delivers robust performance for beverage production and industrial packaging applications, supporting second hand and used bottling line upgrades with reliable throughput.Model: Opera 200 RFMachine type: Rotary Labeling MachineProduction speed (max): up to 30,000 containers/hourCurrent bottle format: 1.0LContainer material: PETLabel type: OPP (oriented polypropylene), roll-fedApplication method: Hot glueReels: 2 with automatic reel changeMaximum reel diameter: 350 mmNumber of label magazines: 2Plate rotation: Cam-drivenWorktable height: 1200 mmElectrical supply: 400 V, 3 Ph + TInstalled power: 25 kWYear of manufacture: 2006Advanced Automation & Control SystemsEquipped with a Pro Face HMI, the Sacmi Opera 200 RF provides intuitive operator control, recipe management, and production monitoring. Mechanical cam-driven bottle plates ensure precise and repeatable label application at high speed. Automatic reel change allows uninterrupted operation during reel depletion, reducing downtime and maintaining production efficiency on a used bottling line.Pro Face operator interface (HMI) for clear diagnostics and settingsMechanical cam control for accurate bottle rotation and label alignmentAutomatic roll changeover to sustain continuous labelingClockwise carousel rotation for standard line layoutsIntegrated safeguards and interlocks for operator protectionProduction Line Integration CapabilitiesThis machine integrates seamlessly into beverage production environments as a standalone unit or inline with rinsing, filling, and capping machines. Designed for PET bottle handling, it interfaces with upstream and downstream conveyors and can be adapted to additional bottle sizes with appropriate format parts.Inline or standalone operation within packaging machinery layoutsDesigned for PET bottle handling in industrial packaging linesCurrent format 1.0L; adaptable to other formats via change partsOptimized for wrap-around OPP labels with hot-melt applicationMachine Condition & Maintenance HistoryThe unit is second hand, overhauled, and guaranteed. It is ready for operation with compatible spare parts available, providing confidence for rapid deployment into production.Ready for immediate useOverhauled and guaranteedWarranty: 6 monthsSupplied with compatible spare partsOperational Performance & VersatilityThe Sacmi Opera 200 RF is built for consistent, high-quality wrap-around label applica... Bdodez E Dlijpfx Abfei

Condition: used, Labelling line with two print and apply stations This VWS Nederland line has a conveyor with two labelling stations in a row. Each station has its own printer and label reel, so you can print and apply two different labels or keep running on two reels. Each station has its own display control. The control panel has start and stop buttons per station and an emergency stop. We did not find a rating plate with the year of manufacture. Bedoz Nc R Sspfx Abfjdi Located in Emmeloord, the Netherlands. Immediately available, price on request. More photos and full specifications: / Type: Labelling line with two print and apply stations Stations: 2, each with printer and label reel Controls: Display per station, push-button panel with emergency stop Construction: Stainless steel frame with conveyor

Condition: new, power: 210 kW (285.52 HP), first registration: 12/2023, fuel type: diesel, tire size: 11R22.5, axle configuration: 4x4, wheelbase: 4,100 mm, fuel: diesel, color: red, gearing type: automatic, emission class: euro6, suspension: steel, total length: 8,260 mm, total width: 2,500 mm, total height: 3,300 mm, loading space volume: 3 m³, Year of construction: 2023, Equipment: air conditioning, = Additional Options and Accessories = - Leaf spring suspension - Sun visor = Notes = Air conditioning MP3 radio Reversing camera with a 7-inch display Headlight beam: 26,000 lumens Motorola DM4600E Electric winch with a pulling capacity of 9,979 kg and a 28 m long steel rope. Equipped with a Szczesniak fire fighting engine. Crew cab for 6 crew members 3+3+1 storage compartment layout 5.4 m LED lighting mast Tanks: water 3,000 liters + foam: 300 liters Godiva P2A 2010 dual-range car pump. DWP16/24 stainless steel roof turret. Roof monitor: Water-foam spray capacity: 800/2400 l/min, and a throw range of 60 m. Manual foam dispenser 3% - 6% Reel 60 m with pneumatic blowing system. Sprinkler system under the chassis. = Further Information = General Information Cab: double Technical Information Number of cylinders: 6 Engine displacement: 7,700 cc Transmission Transmission: Servoshift 6 + 1, automatic Axle Configuration Tire size: 11R22.5 Suspension: Leaf spring suspension Front axle: Steered Bsdpozqdttsfx Abfsdi Weights Unladen weight: 9,500 kg Payload: 16,500 kg GVW: 26,000 kg Functional Height of the loading platform: 1 cm

Condition: used, empty load weight: 1,420 kg, maximum load weight: 1,280 kg, overall weight: 2,700 kg, first registration: 02/2009, Year of construction: 2009, power: 35 kW (47.59 HP), fuel type: diesel, gearing type: other, driver cabin: other, * German trailer * Hapert tandem trailer, type K2700, configured as a sandblasting unit * Ideal for removing paint, graffiti, dirt, etc. * Equipped with a 35 kW diesel engine and compressor * Own water tank * Torbo wet sandblasting system * CompAir compressed air unit, type DLT 0407 * Airflow rate: 5 m³/min * Operating pressure: 7 bar * 30 m hose on a reel * BPW axles * BPW drawbar * Gross vehicle weight: 2700 kg * Tare weight: 1420 kg If a new TÜV inspection is desired, we will gladly provide you with a quote from our partner workshops. Our offer generally does not include a new TÜV inspection, a new DGUV assessment, a new risk assessment, or a new UVV assessment. You can find more trucks on our website under: We speak the following languages: German, English, Polish, Turkish Note: We offer and strongly recommend an inspection and examination of the goods so that the buyer does not have any false impressions regarding the condition and suitability. Inspections and examinations are possible at any time by appointment and are expressly desired. All information is provided without guarantee. We are not liable for any errors or incorrect information in the offer. The buyer is obligated to independently verify the condition and equipment of the goods/vehicles. Subject to change, interim sale, and errors. Bdodez Hwv Depfx Abfoi

Condition: used, mileage: 22,523 km, power: 206 kW (280.08 HP), first registration: 03/2004, fuel type: diesel, empty load weight: 11,100 kg, maximum load weight: 6,400 kg, overall weight: 17,500 kg, axle configuration: 4x4, wheelbase: 4,900 mm, brakes: engine braking, driver cabin: other, gearing type: mechanical, emission class: euro3, suspension: steel, number of seats: 3, Equipment: ABS, all wheel drive, cabin, cruise control, * Like-new 4x4 all-wheel drive with only 22,253 km * Only 2,027 operating hours * 25 m working height * 10.00 m lateral reach * Outrigger width 2.50 m * Water tank 1,500 liters * Separate water pump with diesel drive * C-pipe tank filling * Water supply to the work platform * Cable remote control * Hose box * 50 m water hose on hydraulic reel * 220V power connection in the work platform * Storage compartments all around * Complete warning and safety equipment with flashing light and sirens * Cab with 3 seats * Work lights * 6-speed manual transmission * Superstructure from premium manufacturer Denka Lift * Differential lock * Cruise control * Air-suspended comfort seat * Seat heating * Wheelbase 4.90 m * Gross vehicle weight 17,500 kg * Unladen weight 11,100 kg * Payload 6,400 kg If a new TÜV inspection is desired, we will gladly provide you with an offer from our partner workshops. Our offer generally does NOT include a new TÜV inspection, new DGUV, new SP, or new UVV. You can find more trucks on our website under: We speak the following languages: German, English, Polish, Turkish Bsdpfx Aez Hwv Rsbfodi Note: We offer and strongly recommend an inspection and examination of the goods so that no false impressions arise in the buyer regarding the condition and suitability. Inspections and examinations are possible at any time by appointment and are expressly desired. All information is without guarantee. No liability is accepted for errors and incorrect information in the offer. The buyer is obliged to independently verify the condition and equipment of the goods/vehicles. Changes, prior sale and errors excepted.

Condition: excellent (used), functionality: fully functional, mileage: 18,491 km, gearing type: hydrostat, fuel type: diesel, color: red, overall weight: 28,000 kg, empty load weight: 28,000 kg, tire condition: 80 %, drive condition: 80 %, axle configuration: 4x4, number of seats: 1, mast type: telescopic, suspension: parabolic leaf (spring), Year of construction: 2008, operating hours: 18,491 h, Equipment: additional headlights, adjustable chassis, air conditioning, all wheel drive, cabin, hammer hydraulics, hydraulics, onboard computer, parking heater, For sale: a 2008 JAMA SBU 8000, a specialized, self-propelled rock breaker designed for use in mines and tunnels. The machine is equipped with a boom and an Epiroc hydraulic hammer, used for removing loose rock fragments from the roof and walls and preparing the excavation for further work. A significant advantage is the ability to operate using an internal combustion engine or external electrical power. When connected to a suitable electrical grid, the working unit can operate with the diesel engine turned off. This allows for rock breaking without emissions from the machine's engine in the workplace, a particularly beneficial solution in tunnels and enclosed underground excavations. Additionally, the machine has a compressor mounted in the rear. MACHINE SPECIFICATIONS • Make and model: JAMA SBU 8000 • Year of manufacture: 2008 • Serial number: 8018 • Weight according to nameplate: 28,000 kg • Working equipment: Epiroc hydraulic hammer • External electrical power: 1000 V • CE marking INTERNAL COMBUSTION ENGINE – DEUTZ The machine is equipped with a Deutz TCD 2013 L06 2V six-cylinder industrial engine. This is a turbocharged diesel engine with liquid cooling and intercooling, designed for use in heavy-duty construction machinery. • Model: Deutz TCD 2013 L06 2V • Type: four-stroke diesel engine • Cylinder arrangement: inline, 6-cylinder • Displacement: 7146 cm³ / approximately 7.15 l • Rated power according to the engine nameplate: 200 kW / approximately 272 hp • Rated speed: 2300 rpm • Turbocharging: turbocharger with intercooling • Fuel injection system: Common Rail • Cooling: liquid • Number of valves: 2 per cylinder • Cylinder bore × piston stroke: 108 × 130 mm • Electronic engine management • Unit labeled with Deutz Xchange – manufacturer's engine exchange program OPERATION WITH ELECTRICAL POWER • Possibility of powering the working unit from an external electrical grid • Operation of the equipment with the internal combustion engine turned off • No emissions from the diesel engine during electrical operation • Cavotec cable reel • A solution particularly useful during long-term work in tunnels and underground excavations EQUIPMENT • Working boom with Epiroc hydraulic hammer • Compressor in the rear of the machine • Hydraulic stabilizing supports • Hydraulically controlled front blade • Enclosed operator cab • Control panels with emergency stop buttons • Presto fire suppression system • Hydraulic system for operating the boom and equipment The JAMA SBU 8000 is a machine for companies involved in tunnel construction, underground mining, and rock breaking. The combination of the Deutz engine, the ability to electrically power the working unit, and the Epiroc hammer allows you to adapt the method of operation to the conditions prevailing in the excavation. Bedpfo Afihiox Abfjdi Please contact us for detailed information and to arrange a viewing.

Condition: used, Year of construction: 2005, functionality: fully functional, Maximum web width: 850 mm Maximum print width: 840 mm Minimum web width: 200 mm Print repeat range: 381–762 mm (15”–30”) Number of printing units: 8 Maximum printing speed: 400 m/min Servo-driven printing units Sleeve-based printing system Individual printing-unit temperature control Ink-zone control system Eltromat FS-3 register and ink-zone control Processable Materials: Paper: 70–120 g/m² PET film: 20–90 μm BOPP film: 20–90 μm Laminated materials: up to 120 g/m² Flexible packaging substrates Automatic unwinder Automatic reel splicing Closed-loop web tension control Automatic web guiding Bedpo Agrgrofx Abfedi Maximum reel diameter: 1,200 mm Maximum reel weight: 1,363 kg Corona treatment system Web cleaning system Dust extraction system Anti-static equipment UV drying system 12 UV lamps Hot-air drying system Cooling rollers Temperature-control system Web Control: Automatic web tension regulation Closed-loop tension control Automatic edge guiding Register control Longitudinal and lateral register adjustment Video web inspection system Print-defect detection Barcode inspection Print-image monitoring Automatic rewinder Automatic reel change Controlled web tension during rewinding Cooling before rewinding RFID sleeve identification Servo drives Sleeve handling equipment Cooling and temperature-control units Integrated machine control system Large Set of Sleeves

Condition: used, Year of construction: 2005, machine/vehicle number: LC689, Used Tetra Pak A3 Flex 200S, 100V filling lineTechnical Specifications & Performance DataThis used Tetra Pak A3 Flex filling line is configured for the 200S carton format and is centered on a Tetra Pak A3 Flex 100V filling machine manufactured in 2005. The line includes coordinated downstream equipment for carton handling, straw application and cardboard secondary packaging.Filler: Tetra Pak A3 Flex, version 100V, year 2005Line format: 200SAccumulator: Tetra Pak ACHX30-50M, year 2010Straw applicator: Tetra Pak SA22, year 2009Cardboard packer: Tetra Pak CBP32, year 2009Included accessories: 2 paper reels and 1 paper trolley supplied with the fillerAdvanced Automation & Control SystemsThe filling line is arranged as an integrated industrial packaging system, with the accumulator supporting product flow between filling and downstream operations. The equipment configuration is intended to coordinate filling, carton handling, straw application and cardboard packing within a continuous production process.The Tetra Pak A3 Flex filler is identified as version 100V, with the possibility of an upgrade to 150V. Any upgrade scope should be assessed against the required packaging configuration and operating requirements.Production Line Integration CapabilitiesThis Tetra Pak carton filling line combines the principal stages required after carton filling: buffering, straw application and secondary cardboard packaging. The included paper reels and paper trolley support the handling and loading of packaging material for the filler.Machine typeManufacturer / modelYearFilling MachineTetra Pak A3 Flex 100V2005Various EquipmentTetra Pak ACHX30-50M2010Various EquipmentPaper ReelVarious EquipmentPaper TrolleyVarious EquipmentTetra Pak SA222009Case PackerTetra Pak CBP322009The modular arrangement makes this second hand filling and industrial packaging line relevant for beverage production applications using the specified 200S carton format. It can be integrated with suitable upstream product preparation and downstream end-of-line handling equipment according to plant requirements.Machine Condition & Maintenance Histor... Bjdpfxo Adttae Abfsdi

Condition: used, Year of construction: 2010, machine/vehicle number: ET243, Used METTISIGILLO ETIPACK Super 1.3 - 2.5 labeller machineTechnical Specifications & Performance DataThis Etipack Super 1.3 – 2.5 tax stamp labeling machine is engineered for high-speed seal application on multiple container materials used in beverage production and industrial packaging. Designed for reliable performance in second hand and used bottling line environments, it offers robust productivity with precise label placement.Manufacturer: EtipackModel: Super 1.3 – 2.5Year of construction: 2010Machine type: Tax stamp labeling machine with double headMaximum speed: 32000 bphLabel type: Tax stamp/seal, Autoadhesive L-shaped sealMaximum roll diameter: Ø 400 mNumber of reels: 1Compatible containers: PET, Glass, Aluminum cansElectrical supply: 400 V, 3 PH, 50 HzCurrent draw: 10 ACompressed air pressure: 7 barAdvanced Automation & Control SystemsThe Super 1.3 – 2.5 integrates dependable automation for consistent tax stamp application at high throughput. Its dual-head configuration supports continuous operation and quick alternation to minimize downtime. The electrical system operates on 400 V three-phase, 50 Hz, enabling smooth integration into standard industrial power grids. Operator-focused controls facilitate setup, alignment, and calibration for different products and production runs.Production Line Integration CapabilitiesBuilt for flexible integration, this labeling machine can be installed as a standalone unit or inline within a complete packaging or used bottling line. It interfaces well with upstream filling and capping equipment and downstream inspection and case packing systems typical in beverage production. Suitable for PET, glass bottles, and aluminum cans, it allows multi-product operations across water, beer, wine, spirits, milk, and soft drinks.Machine Condition & Maintenance HistoryThe machine is overhauled, guaranteed, and ready for use. It is offered in excellent working condition, supported by a 6-month warranty and compatible spare parts. This ensures fast commissioning and reliable performance for second hand industrial packaging operations seeking minimal startup times.Operational Performance & VersatilityOptimized for tax stamp/seal application, the Etipack Super 1.3 – 2.5 delivers accurate placement at high speeds. The double head enhances uptime and throughput, particularly valuable for high-volume beverage production. Its capability to run PET, glass, and cans extends its utility across multiple SKUs and packaging formats. Typical applications include water (still and sparkling), beer, wine, spirits, milk, and soft drinks within modern bottling equipment environments.Installation Requirements & Site PreparationInstallation requires standard industrial utilities: 400 V three-phase 50 Hz electrical service and 7 bar compressed air. The compact footprint supports straightforward placement on existing conveyor systems. Ensure adequate clearance for roll loading, operato... Bdjdpfxo Ady D Es Abfji