Automatic Reel Storage 10000T

Sicma IRS

Condition: excellent (used), Complete line direct from Bankrupt company which was filling capsules and tablets into small tubs. Bottlea are loaded into the line from lazy susan, product is counted and doses into the tub or bottle which is then foil sealed before the screw lid is applied. All machines were bought new in 2015 and appear to be in excellent condition. The counter is a Vitacount 12-1 Bledpfx Afjw Hz T Eemsp

Condition: as good as new (ex-display), operating hours: 50 h, Uhlmann thermoform packaging system UPS 4 ETX for processing PVC forming film and aluminum lidding film Basic machine in modular technology and balcony construction, with 12 modules: - Molding film holder with 2 pneumatic clamping shafts for core diameter 76 mm, max. roll diameter 800 mm - Cutting and gluing table for shaped film - Shaped film unwinding, clocked - 3-zone contact heating: - 6 heating circuits, individually adjustable - Simultaneous heating of min. 3 feeds - Heating plates during machine stop automatic opening - Forming station with 4-column lifting table guide - Filling section, length 1,360 mm - Safety flap on the filling section Cover film unwinding on operating side with pneumatic expansion shaft for core diameter 76 mm, max. roll diameter 300 mm - Plate sealing station with 4 columns lifting table guide: - Integrated overload protection - Automatic lifting of the upper sealing sealing tool when the machine stops - Free module for the installation of an additional station - Clamping gripper feed Bodpfx Afstndpzsmslp - Punching station with blister lowering - Waste cutter with integrated motorized transport of the punching grid - Smoothing device - ET/DT perforating station - Monitoring of the compressed air supply with machine stop when the minimum the minimum value - Visio Scan - Electrically interlocked safety doors - Quick format change due to - plug-in format parts - Plug-in connections for cooling water supply - Main drive with frequency-controlled three-phase motor geared motor - Switch cabinet at the rear of the machine, swivel-mounted Paccontrol operating control - 10.4" TFT color display with 640x480 pixel resolution - Processor 68C030 - OS9 2.9 operating system - 2 MB SRAM, 2 MB Flash, 16 MB DRAM - SRAM card reader - IBM standard membrane keyboard - Centronics interface for external printer - PS2 interface for external keyboard - VGA interface for external monitor - Serial interface for diagnostic purposes - Arcnet interface - 8 serial interfaces for connecting devices Integrated shift register ISR Rejection of individual blister rows, e.g. overheated film in the heating station, products in the sealing station, etc. Machine control: Memory-programmable sequence control in modular design: - B&R - PLC control - Bus system with modules for CPU, inputs, outputs, temperature controller, cam controller, etc. - External program memory Technical data UPS 4 ETX: - Number of cycles: - ET range: min./max. : 15/ 50 T/min. depending on film quality, feed and format design - Format range: min./max. feed in filling area : 64/226 mm min./max. film width : 100/300 mm min./max. punching width : 28/284 mm max. drawing depth : 12 mm - Compressed air: - Inlet pressure: approx. 6 - 8 bar 4 Simtap feeders

Condition: like new (used), Weinig Hydromat H22N four-side planer - German production - DTR - year of production 1992 - two rollers in the tabletop, milled before the first head - for wet wood TECHNICAL PARAMETERS: - planing width 220 mm - planing height 140 mm - spindle diameter 50 mm 1 lower head 7.5 kW 2 legal head 7.5 kW 3 left head 11 kW 4 upper head 7.5 kW 5 lower head 11 kW hydraulic feed pump motor power 15 kW feed speed smoothly adjustable up to 60 m/min feed on cardan shafts electric height adjustment pneumatic pressure Bodpfx Afspvi Sksmjlp five pulling rollers in the countertop eight steel upper pulling rollers one upper rubber pulling roller rests on horizontal spindles jointer on the lower spindles Transport dimensions 500x200x160 cm weight 4 tons

Condition: like new (used), Year of construction: 2016, functionality: fully functional, total height: 11,000 mm, total width: 2,350 mm, total length: 11,395 mm, load capacity per storage section: 35 kg, load capacity: 49,560 kg, For SALE 6 pieces!!! KARDEX Vertical Buffer Module LR35® Machine Type: LR-35-19x400x600x11000 Machine height: 11,000 mm Required installation height: 11,050 mm Machine length: 11,395 mm Machine width: 2350 mm Storage segments: 19 pieces Bin width: 400 mm Bin depth: 600 mm Max. load (calculated per Bin): 35 kg Machine surface (without "turntable"): 23.49 m² Machine surface (incl. "turntable"): 26.77 m² Permitted total weight: 59,492 kg Permitted total load: 49,560 kg Empty weight (without Bins): 11,415 kg Speed x-axis: max. 3 m/s Speed y-axis: max. 3 m/s Bedpfx Aewqp Npofmslp Safety intermediate distance: 60 mm Storage grid 25 mm Permitted ambient temperature in operation: +5° - +40° Permitted relative humidity: 85% Year of Build: 2016 Machinehandel De Leeuw BV is one of the few companies in Europe that trades and has in stock mainly used Kardex Remstar VLM automatic Lift (Shuttle systems) & rotating warehouse systems (paternoster systems). See our website for the current stock. We assemble and/or disassemble these systems in a safe manner with VCA certified technicians and we have been doing this for more than 33 years. We also disassemble other brands such as: Hänel, Electrolux, Bertello, Megamat, Lista, Denocard Machinehandel De Leeuw BV Oordeelsestraat 7–b 5111 PA Baarle-Nassau TheNetherlands Email: info at deleeuw-machinehandel.nl

Condition: like new (used), 4 x stainless steel pressure tanks, insulated, temperature-controlled, with agitator connection Technical data / dimensions Available quantity: 4 Volume: approx. 4325 liters Tank type: Pressure tank Condition: used Suitable for food: yes Design: upright Diameter inside: approx. 1,500 mm External diameter: approx. 1,700 mm Bledpfxetv Rm Ss Afmjp Cylindrical height: approx. 2,000 mm Total height: approx. 3,684 mm Weight: approx. 1,400 kg Specific weight of the medium: 1.0 to/m³ Operating pressure: overpressure/underpressure Operating pressure: -1/+6 bar Test pressure: 7.5 bar Wall thickness bottom: approx. 8 mm Wall thickness top: approx. 12 mm Wall thickness jacket / cylinder: approx. 6 mm Ground clearance: approx. 700 mm Operating temperature: 150 degrees Celsius Material / composition Material inner jacket: V4A (1.4435) Material double jacket: V2A (1.4301) Feet material: Stainless steel Outer surface: Mirror polished Ra

Condition: excellent (used), Year of construction: 2022, functionality: fully functional, feed rate X-axis: 40 m/min, working width: 240 mm, planing height: 120 mm, spindle diameter: 40 mm, overall weight: 4,000 kg, power of feed motor: 4,000 W, We offer this very well-maintained SCM superset nt moulder and planer, year of manufacture 2022. Bsdpfxsyapi Ho Afmelp Manufacturer: SCM Model: superset nt Year of manufacture: 2022 Condition: very good Category ID: 858 Type ID: 2293 Type: Moulder and Planer If you have any questions or need further information, please feel free to send us a message or call us.

Condition: ready for operation (used), Year of construction: 2002, Vehicle description: Diesel side loader forklift JUMBO 50/12/45 Year of manufacture: 2002 According to the meter: 3,724 operating hours 5-ton lifting capacity Blsdpfxjid R Dno Afmsp 4.5-meter lifting height 1.2-meter fork length Selling price: EUR 21,950.00 net Affordable delivery also possible!

Condition: new, Year of construction: 2026, Mobile paternoster stacking system - For edged boards - Lengths: from 2-5m - Output: 20-30 boards per minute - Total connected load: approx. 15 kW Bljdpfx Aezgaqysfmop - Total weight: 3940 kg This is a "PLUG and PLAY" system. The entire stacking machine can be positioned at the desired location using a forklift. A power connection via a CE plug is sufficient, and the system starts as shown in the video. Various stacking heights and stacking widths can be pre-selected.

Condition: excellent (used), Becomix Universal Homogenising Mixer Model RW3000, Capacity 3000 lts, Complete with piping and control panel. Universal mixer for various cosmetic and pharmaceutical products Application: Low to very high viscosities - For example, creams, ointments, emulsions, toothpastes, gel products, mascara, make-up. Bjdpfx Afsx Dnilomjlp Properties: Homogeniser with internal and external circulation, Anchor agitator with scrapers for horizontal and vertical mixing Short heating and cooling times, Hygienic and dead space-free construction, CIP/SIP, ATEX zone 2 to 0 possible, cGMP

Condition: reconditioned (used), pressure: 2 bar, temperature: 133 °C, power: 45 kW (61.18 HP), type of input current: three-phase, input voltage: 400 V, usable tank capacity: 125 l, rotational speed (max.): 82 rpm, rotational speed (min.): 19 rpm, Used Symex CML125 vacuum homogenizer mixer in pharma design, factory overhauled with new seals. Complete process unit for mixing, dispersing, homogenizing, emulsifying, heating, cooling and vacuum – ideal for creams, ointments, gels and pastes in pharma, cosmetics and food. EQUIPMENT Bsdpfoyf N H Aex Afmolp • Scraper agitator with PTFE scrapers and 2 baffles, for products up to approx. 100,000 mPas • Bottom homogenizer Symex HFDA 250, forward/reverse, double mechanical seal SiC/SiC • Large and small recirculation DN50, direct powder and liquid suction • CIP with rotating spray heads (Toftejorg), hydraulic lid lift • Liquid ring vacuum pump, temperature control unit (steam / cooling water) • Siemens S7-300 with touch panel, batch control, trend recording • Documentation incl. manuals, wiring diagrams, test certificates; PED / AD2000 SERVICE • Turn-key installation and commissioning available, optional IQ/OQ • 12 months warranty (excluding wear parts) Inspection in Weyhe near Bremen, Germany, by appointment. Questions or more photos? Simply send us an inquiry. Offer subject to prior sale by an independent dealer, not affiliated with the manufacturer.