Used Recooler for sale (45)

Condition: used, Cooling unit, cooling water recooler, water chiller, chiller O. Hellwig Year of manufacture: approx. 1995 Cooling capacity: approx. 8 kW Codpfxjpu R Ncj Agfjgu Rated power of cooling unit: 3 kW Refrigerant: R422D Water tank volume: approx. 35 liters Circulation pump flow rate: 40 liters/min Pump output: 0.63 kW Water connections: 1/2 inch Power supply: 380 Volt, 50 Hz - Temperature setting via rotary potentiometer Space requirement (L x W x H): 1100 x 750 x 140 mm Weight: 285 kg

Condition: used, Cooling unit cooling water cooler ARO type VWK 31/1-S Factory number year of manufacture 2007 Cgsdpfsvw A T Nox Agfju Cooling capacity 3500 watts Ambient temperature max. 32°C Refrigerant R407C Refrigerant filling quantity 0.98 kg Operating pressure of cooling compressor max. 29.5 bar Water tank capacity approx. 8 liters Discharge volume of circulation pump 27 liters/min. (1620 liters/h) Water connections quick release coupling Rectus type 26 Power connection 230 volts, 50 Hz, 2.2 kW - Temperature setting via DANFOSS thermostat controller - Built-in circulation pump (250 watts) Space requirement L x W x H 700 x 550 x 520 mm Weight 75 kg Good condition

Condition: ready for operation (used), Year of construction: 1987, Recooling capacity at water flow temperature of 15/10°C: 2.3/2.1 kW Cedpfx Ajr Ezdrjgfogu Volume flow: 0.5 m³/h electrical Connection: 380 V, 1 kW Space requirement: 900 x 600 x 1020 mm Weight: 160kg Water connections reduced to 1/2".

Condition: used, Year of construction: 2010, functionality: fully functional, cooling capacity: 172.5 kW (234.53 HP), type of input current: three-phase, overall weight: 481 kg, input voltage: 400 V, Equipment: type plate available, Güntner table-top recooler with two fans. Description as per the attached data sheet. Multiple units available! Cgodpfx Aey Dipcogfou

Condition: good (used), Autotherm ATK 2000 cooling system 20.5 kW recooling system in 20-foot container Technical data Rated voltage: 3/PE AC 50Hz 400V (DIN IEC 38) Nominal output: 20.5 (31.5) kW Rated current: 50 (71) A Supply line fuse protection: 80A Mechanical data Dimensions: (W x L x H) 2430 x 6800 x 4350 mm Weight: 4800 kg Flow: Flange SDIN2633 DIN100 PN16 Return flow: Flange SDIN2633 DIN100 PN16 Overflow / drain: 2” female thread Inlet well water: 2” female thread Well water drain: 2” female thread Cgsdpfx Agsuzhcuefeu Adiabatic inlet: 3/4” female thread Filling: manual 3/4” female thread Water circuit Heat transfer medium: Water/glycol ( 90% / 10% ) Flow pressure: max. 10.6 bar Tank volume: 4000 liters Free cooler circuit Pump type: Grundfos CR 45-1-1 A-F-A-E-EUUE Delivery pressure: ... 2.15 bar Flow rate: 58 m³/h Consumer circuit Pump type: (pressure booster system) Grundfos Hydro 2000 ME 2 CRE 32-6 A-F-A-E-EUUE Delivery pressure: max. 10.6 bar Flow rate: max. 40 m³/h Container 20-foot AIS-DSC-22-28 External dimensions mm (LxWxH) 6,058 x 2,438 x 2,591 Internal dimensions mm (LxWxH) 5,898 x 2,352 x 2,390 Internal floor area m2: 13.88 Control 2000 ME compact control unit Compact microprocessor control unit for infinitely variable control and cascade control of pumps with MGE motor with integrated frequency converter for demand-dependent, energy-optimized operation of multi-pump systems. With automatic activation and deactivation of the individual speed-controlled pumps by a digital controller adapted to centrifugal pumps. Grundfos R100 infrared manual control and diagnostic device for commissioning, data monitoring, reading out fault messages and configuring Grundfos pumps. Financing through our bank is also possible. komplett-konzept.leasingo.de Further articles - new and used - can be found in our store! International shipping costs on request!

Condition: ready for operation (used), Year of construction: 2021, Aermec ANL 202 Q Chilled Water Recooler Approximate dimensions: 1750mm x 750mm x 1450mm (W x D x H) Weight: approx. 450 kg Cooling capacity: 43.00 kW Year of manufacture: 2021 Codpfx Aeywtpmegfegu You are welcome to arrange a viewing appointment. We can also organize cost-effective shipping for you! You will receive a proper invoice. For international customers, a net invoice can be issued, provided you have a valid VAT ID. Subject to prior sale. Visit our shop to see our other offers as well. All company names and trademarks mentioned are the property of their respective owners and are used solely for identification and description of the products. Please note that technical specifications may vary and errors in the item description cannot be ruled out and are subject to change.

Condition: excellent (used), Water cooler with refrigeration compressor Cgjdpfx Asva Eawjgfsu Make DALEX TYPE ES 1 cooling capacity 870 W with connection cable and mains plug for 230 V 50 Hz connection suitable for resistance welders up to 40 kVA rated power

Year of construction: 2011, condition: ready for operation (used), A compact ammonia refrigeration system GEA with evaporative condenser and pump-operated plate evaporator is available. Design: split design, refrigeration capacity: 247kW, compressor speed: 1450rpm, evaporation temperature: 0.7°C, condenser capacity: 300kW, wet-bulb temperature: 21°C, max. condensing temperature: 35°C, refrigerant: NH3, max. operating pressure high pressure/low pressure: 23bar/16bar. Secondary refrigerant: electrolysis water, secondary refrigerant temperature inlet/outlet: 6°C/2°C, secondary refrigerant volume flow: 54m³/h, secondary refrigerant pressure drop: 53kPa, refrigerant charge: 50kg, oil charge: 20l, compressor: Grasso 410. Machine dimensions X/Y/Z: approx. 4300mm/2000mm/2800mm, weight: approx. 6500kg. Documentation available. An on-site inspection is possible. Cgedpfx Aex Sywaegfju

Condition: used, Year of construction: 1998, Technical details: x-travel: 760 mm y-travel: 550 mm z-travel: 300 mm control: Röders RMS 6 Vers. 2.70 spindle taper ISO: HSK E40 turning speed range: 42.000 stufenlos U/min spindle head swivable left - right: -52 ° / +5° (B-Achse) ° feed:: 0 - 30.000 mm/min Tool changer: 18-fach Werkzeuge + 2 places for Werkzeugvermessung Table dimensions: 860 x 550 mm table load capacity: 800 kp Number of working hours: siehe Foto h compressed air: 6,5 bar total power requirement: 20 kW weight approx.: 7000 kg dimension machine xH: 3,1 x 2,4 x 2,6 m dimension coolant device: ca. 0,6 x 0,8 x 0,7 m other features: Highspeed direct spindle digital axis drives AC servo motors ball screw spray cooling (microjet cooling jet and lubrication unit) working spindle Fischer MFW - 1230/42 up to 42.000 rpm tool measuring laser and probe system PS 25.00 Manual control unit Climatic cabinet Cooling water recooler Hyfra The machine can be demonstrated under power. Cgsdpfxju Ndbpj Agfou *

Condition: used, Technical details: current capacity: 100 kVA throat: 600 mm arm distance: 600 mm control: Bosch Programmier-Feldbusse pincer opening adjustable: 240 - 540 interface: RS 485 voltage: 500 V connection voltage: 380 V air pressure: 6 bar cooling water consumption: 14 l/min weight of the machine approx.: 770 kg space requirements of the machine approx.: 1,5 x 0,95 x 2,1 m SPOT WELDING MACHINE - WELDING TRANSFORMER Application: Spot, projection and series spot welding 1 - 1000 Hz Lifting cylinder electrode force 11 daN PSI 6000 medium frequency inverter with integrated control function (50/60 Hz AC mains voltage) Electrode arm Ø 35mm Csdpfsu Nv Easx Agfjgu Electrode holder adjustment 200mm (manual) Arm distance min. 240mm max.: 540mm Manual adjustment Operation via Rexroth IntraControl VCP05 control panel and foot switch incl. replacement electrodes (water-cooled) external Rittal water recooling unit SK3320.609 *

Condition: ready for operation (used), Year of construction: 2019, travel distance X-axis: 400 mm, travel distance Y-axis: 450 mm, travel distance Z-axis: 550 mm, controller manufacturer: SIEMENS, controller model: Sinumerik 840 D SL, overall weight: 21,000 kg, spindle speed (max.): 24,000 rpm, number of slots in tool magazine: 80, number of axes: 5, This 5-axis SCHMID SE 368 horizontal machining centre was manufactured in 2019. It features a Siemens Sinumerik 840 D SL control, rapid traverse rates of 75/40/90 m/min in X/Y/Z, and a shuttle table. Equipped with dual NC rotary swivelling units, a 30-fold tool changer, and HSK-A63 tool holder. Max speed is 10,000 rpm. Includes a chip conveyor and recooling system. A great opportunity to buy this SCHMID SE 368 horizontal machining centre. Contact us for further details regarding this horizontal machining centre. Additional equipment • Double spindle • Shuttle table • 2x 2 NC rotary swivelling units • Switch cabinet system • Chip conveyor Knoll 600K-1 2019 • Hydraulic unit • Filter system • Recooling system Lahntechnik KOF1803-100 2020 Cgedpfx Ajyyuwwjgfju • Number of tool magazine positions: 2x 30 • Rotary table (NC / hydraulic clamping) : n x 360o, vertical axis, Machine Benefits Technical Machine Benefits • Ibag three-phase main drive : s1-100% 40 kw / s6-40% 52 kw • Key performance data working spindle kw s1 : 3 12 29 40 40 • Spindle speeds approx. 1/min : 1,000 5,000 10,000 20,000 24,000 • Torque approx. Nm : 27 27 27 19 17 • Tool diameter with free neighbouring positions : 125 mm • Swivelling table (nc / hydraulic indexing) : vertical axis, 0° - 180°, max. Rotation angle in connection with 5th axis : +/- 150° • Rotary table diameter : 400 mm, rotary table (horizontal axes u1-u2/ v1-v2), rotary table (nc / hydraulic clamping) : n x 360o, vertical axis, rotary table diameter : 330 mm • Pallet clamping : 2 zero point clamping modules/ table • Position measuring systems : absolute position measuring systems • Position tolerance x - y - z : 0. 008 mm (vdi/dgq 3441) Extra Information Machine still under power

Condition: excellent (used), Year of construction: 2007, BA 600-2 CNC, Horizontal Milling and Drilling Center SW Schwäbische Werkzeugmaschinen GmbH Travel: X axis: 600 mm Y axis (changeover position): 600 (975) mm Z axis: 500 mm Control: Siemens 840D control, side-mounted Feed/Rapid traverse speeds: X, Y, Z: 1 – 45,000 mm/min Max. feed force X, Y, Z: 15,000 N Average acceleration: X, Y, Z: 2.5 m/s² Measuring system: Direct measuring system X, Y, Z Spindles: Spindle speed (infinitely variable): 20–10,000 rpm Torque: 2 x 363 Nm (S6/40% duty cycle) Power: 2 x 38 kW (S6/40% duty cycle) HSK-A 100, horizontal tandem arrangement Cgsdpsy Swq Rofx Agfju Spindle distance: 600 mm Spindle bearing diameter: 100 mm Motor spindles, liquid-cooled, AC technology Working area: Swing carrier with spur gearing, max. workpiece weight 2,000 kg Swivel time 0/180 degrees approx. 6.0 sec 2 NC rotary tables, hydraulically clamped, max. workpiece weight 700 kg, table speed 25 rpm Partition between machining and loading area Tool magazine: 2 x 50 tools HSK-A 100 chain-type magazine Tool change time (chip-to-chip): 4.48 sec Max. tool diameter: 100 mm 250 mm with adjacent slot free Max. tool length: 420 mm Max. tool weight: 20 kg Equipment: Central lubrication Oil minimum quantity lubrication (spindle lubrication) Chip conveyor (hinged belt conveyor) Coolant purification with compact band filter Hydraulic unit Maintenance unit Water recooler Full enclosure, crane loading possible Dimensions: approx. 5.15 x 8.50 x 4.20 m Weight: approx. 20,000 kg Year of manufacture: 2007 Other features: Very good condition Setup parallel to main time Available from December 2023/January 2024

Condition: excellent (used), CTS Climate Test Chamber C-70/1000-S Device Data Manufacturer: CTS GmbH Model: C-70/1000-S Year of manufacture: 08/2011 Serial number: 113054 Type: Climate test chamber / Environmental simulation chamber Cooling: Water-cooled Description Used CTS climate test chamber for precise temperature and climate testing. Suitable for material, component, and reliability testing. Applications in industry, research, development, and quality assurance. Temperature and Climate Data Temperature range: -70 °C to +180 °C Temperature change rate: approx. 2.5 K/min heating Temperature change rate: approx. 2.5 K/min cooling Humidity range: 10% to 98% RH Dew point range I: +7 °C to +94 °C Dew point range II: -10 °C to +7 °C Electrical Data 400 V / 3/N / 50 Hz Power: 9.7 kW Current: 17.9 A Protection class: IP 22 Cooling System Refrigerants: R404A / R23 Pre-cooling stage: R404A, 2.3 kg Cooling stage: R23, 0.86 kg / 15 bar Operating overpressure PS: 25 bar Test pressure PT: 27.5 bar Features CTS control unit with LCD display Programmable operation Digital setpoint/actual value display Viewing window in door Stainless steel test chamber Test specimen protection / temperature limiter Interior lighting Cable ports on the sides Feedthroughs approx. 50 mm and approx. 125 mm RS232 interface as per documentation Digital outputs for test specimen control Mobile design on castors Dimensions Test chamber volume: approx. 1000 liters External (W x D x H): approx. 2245 x 1270 x 1950 mm Installation size (W x D x H): approx. 2350 x 1290 x 2000 mm Weight Test chamber: approx. 1000 kg Recooler: approx. 120 kg Documentation Declaration of conformity Test certificates Operating manual Error messages and digital channels Site plan Quick guide Humidity diagram Scope of Delivery CTS Climate Test Chamber C-70/1000-S Documentation as available Cgsdpfxoy Iam Hj Agfju Scope of delivery as shown Optional Pre-delivery Service Function test Refrigerant service Leak test Test run with protocol Condition Used. Condition as per photos. Note Used equipment, sold without warranty. Inspection possible by appointment. Loading and transport can be organized on request. Subject to prior sale and technical changes. If you have any questions, please feel free to contact us.

Condition: used, Year of construction: 2000, grinding diameter 300 mm grinding length 1200 mm workpiece turning speeds 6000 U/min max. workpiece weight 70 kg control FANUC peripheral speed 140 m/sec grinding wheel size CBN 400 x 5 mm Spindle power 24 kW weight of the machine ca. 11 t Csdpfx Aey Dibxsgfogu Quickpoint 5002/10 CNC external cylindrical grinding machine, built in 2000 - Regular maintenance carried out - Documentation available Special accessories: - Junker novotecnic cooling lubricant system - 2x LTA II R/H extraction systems - Hyfra recooler - 4 grinding wheel blanks - Oil pan with grating *Disclaimer: All information is non-binding and may be incomplete or inaccurate. Subject to change without notice. No liability is accepted for the accuracy or completeness of the information provided. The disclosure or transfer of the data provided by us is not permitted without our express written consent. Translated with (free version)

Condition: ready for operation (used), Year of construction: 2010, operating hours: 36,604 h, travel distance X-axis: 750 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 600 mm, overall weight: 9,500 kg, number of axes: 4, This 4-axis AXA DBZ vertical machining centre was manufactured in 2010. It features an impressive X-axis travel of 2 x 750 mm for pendulum processing, Y-axis travel of 500 mm, and Z-axis travel of 600 mm. The machine includes a NC rotary table with hydraulic counter bearing and a plate-type tool changer. If you are looking to get high-quality machining capabilities, consider the AXA DBZ vertical machining centre we have for sale. Contact us for further details. • Spindle hours: 36,604 h (verified via image) • Machine ON hours: 81,189 h • Overall dimensions: 4500 × 2250 × 2700 mm • Voltage: 400 V • Frequency: 50 Hz • Total power requirement: 45 kVA • Full load current: 65 A • External fuse: 80 A • Tool changer: Plate-type tool changer • Design/configuration: Traveling column; Left/Right work areas (pendulum machining) • Safety/enclosure: Maintenance door Additional equipment Cgedpfx Asy Edv Hsgfju • NC rotary table RTA 200 with hydraulic counter bearing (4th axis) • Clamping system: Hydraulics for right/left work areas, incl. rotary union for 4th axis • Internal coolant supply (IKZ) • Chip conveyor • Emulsion (coolant) system • Recooling unit (chiller)

Condition: ready for operation (used), Year of construction: 2017, For sale is a fully functional post-mix syrup system from a production liquidation in the beverage industry. The system was last used in a professional beverage production facility and includes several components for the processing, pasteurization, and filling of post-mix syrups. Cgodey Uy Nzjpfx Agfou Ideal for: - Beverage manufacturers - Food production - Syrup & post-mix production - Bottling plants - Components of the system: Tanks / Containers - Tank for Syrup Mobil 500 – CONTAINER KG – Year of manufacture 2017 - Tank for Syrup Mobil 1000 – CONTAINER KG – Year of manufacture 2017 Production & Filling Technology - Postmix Syrup Pasteur (BIB & CT) – KREUZMAYR – Year of manufacture 2017 - Postmix Container Filler – KREUZMAYR – Year of manufacture 2017 - Recooling for Postmix Syrup – FISCHER – Year of manufacture 2017 Details about the system: - Application: Pasteurization of post-mix syrup (Bag-in-Box & Container) - Condition: operational / functional - Maintenance documentation & videos available if applicable - Includes accessories and existing spare parts Special features: - Industrial quality – ready for immediate use - Ideal for beverage manufacturers / bottlers - System can be inspected in operation on site - Professional dismantling organized

Condition: ready for operation (used), Year of construction: 2019, operating hours: 5,936 h, travel distance X-axis: 715 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 500 mm, controller manufacturer: SIEMENS, controller model: Sinumerik 840 D SL, overall weight: 10,000 kg, spindle speed (max.): 10,000 rpm, tool weight: 8,000 g, number of axes: 5, This 5-axis SCHMID SE 371 horizontal machining centre was manufactured in 2019. It features a Siemens Sinumerik 840 D SL control system, a shuttle table, and a 30-position tool changer with HSK-A63 tool holders. Additional highlights include a chip conveyor by Knoll and a recooling system by Lahntechnik. A great opportunity to buy this SCHMID SE 371 horizontal machining centre. Contact us for further details regarding this horizontal machining centre. Additional equipment • Shuttle table • 2x NC rotary swivelling unit • Chip conveyor Knoll 600K-1/II 2019 • Filter system • Recooling system Lahntechnik KOF1803-100 2020 • Hydraulic unit • Switch and control cabinets • Rotary table rotation axes NC/hydr. clamping : 360 x n° degrees • Rotary table diameter : 284 mm, Machine Benefits Qualitative Machine Benefits • Digital inverter system • Space requirement incl. Operation : approx. 3. 5 x 5 m2 • The machine ran dry / without coolant. The machine has a profibus interface. Special schmid chucks are currently installed. Part-specific, hydraulic. Technical Machine Benefits • Swivelling range: -22/+95° Cgodpfx Ajyyuv Hsgfou • Traverse range x - y - z : 715 - 400 - 500 mm • Three-phase main drive : kw at s1 100% / s6 40% ed • Key performance data working spindle kw / s1 / s6 : 0. 5 • Spindle speeds approx. 1/min : 50 1,000 1,850 10,000 • Torque approx. Nm s1/s6 : 100/135 100/135 100/135 24/31 • Acceleration x - y - z : 4-6-9 m/sec2 • Tool change time : approx. 2. 5 sec. • Horizontal swivelling range nc/hydr. Clamping : - 22° / + 95° degrees • Centre distance of the rotary axes / chuck : 430 mm Extra Information Machine still under power

Year of construction: 2020, condition: ready for operation (used), A complete Reisner refrigeration system including water tank, dry cooler and condenser is available. Version: split version, refrigerant: R513A, tank volume: approx. 3m³, cooling capacity: 170kW, medium: water, medium temperature inlet/outlet: 14°C/10°C, condenser recooling capacity: 230kW, dry cooler recooling capacity: approx. 170kW. Condenser dimensions X/Y/Z: approx. 4450mm/2250mm/1500mm, dry cooler dimensions X/Y/Z: approx. 7050mm/1600mm/1950mm. Documentation available. An on-site inspection is possible. Csdjy Hvqlspfx Agfogu

Condition: good (used), Year of construction: 2018, weight 582 kg operating pressure 16,0 bar capacity 36,0 l/min viscosity VG10 voltage 400/50 V/50 control voltage 24 VDC Continuous flow recooling unit - Cooling capacity 9.0 kW at 40° ambient temperature - Permissible ambient temperature: +10°C to +40°C Codpfx Agjx Urpgefogu - Pressure loss: 0.5 bar - Refrigerant type: R134a - Refrigerant charge weight: 2.1 kg - Permissible operating pressure: 24 bar - Total electrical connection: 3.19/11.81 kW/A - Continuous sound pressure level: 75 dB

Condition: used, HYFRA VWK 270-EN cooling water recooler Cjdpfeyn Sbnsx Agfjgu

Condition: ready for operation (used), Year of construction: 2005, A 3-axis milling machine is offered. Travels X/Y/Z: 1016mm/610mm/760mm, tool changer: 24 positions, spindle: prepared for external cooling unit. Accessories: recooling unit Rehsler TAE evo M, Renishaw measuring system, inspection by appointment possible. Cgodpfxjy A Sl Rj Agfeu

Year of construction: 2020, condition: ready for operation (used), controller manufacturer: SIEMENS, controller model: 840D, overall weight: 15,000 kg, This PROFILATOR DV370-HL-05 was manufactured in 2020. A robust and reliable unit, it is ideal for those looking to enhance their machining operations. Consider the opportunity to buy this PROFILATOR DV370-HL-05. Contact us for more information. Additional equipment • Toothed Spindle 1: Tool clamping interface: HSK-C63/ Tool speed max: 4500 1/min /Screw tightening torque, expansion chuck: 20 Nm • Toothed Spindle 2: Tool clamping interface: UTS 50 /Tool speed max: 7000 1/min/ Screw tightening torque UTS clamp: 40 Nm Machine Benefits Technical Machine Benefits • Nc workpiece spindle 1: traverse path x1: 1760mm, z1: 385mm/ travel resolution on the cnc: 0. 001mm/ input speed of the axes max: 60 m/min • Nc workpiece spindle 2: traverse path x2: 2011mm, z2: 390mm /travel resolution on the cnc: 0. 001mm/input speed of axes max: 60 m/min • Nc workpiece counterholder: traverse path x3: 104mm, z3: 107mm /travel resolution on the cnc: 0. 001mm /input speed of the axes max: 60 m/min • Gear tower 1: traverse path y11: 195mm /travel resolution at the cnc: 0. 001mm /swivelling angle b1 max: 10° Csdpoynhu Djfx Agfogu • Loading gantry: travel u5 axis: 1907mm /traverse path v5 axis: 271mm • Input speed (all applicable axes): max 60 m/min • Rotation diameter max: 210mm/machining diameter max: 200mm/workpiece length max: 300mm/interface, workpiece clamping: kk6/workpiece speed max: 1100 1/min • Factory back spindle 1/2: speed max: 1000 1/min/gear spindle 1 and 2, shift slide y11, nc workpiece counterholder, slide x1/x2, slide z1/z2, a11 axle (charging unit), u5 & v5 axes (loading gantry):/speed max: 3000 1/min, 9000 1/min for gear spindle 2 • Loading gantry: 500kg/magnetic chip conveyor: 100kg/water recooler: 150kg

Condition: used, Year of construction: 2017, functionality: fully functional, We are offering this used GÜNTNER Hermeticool-Hybrid HC-H 100 S-GFHE 080.5/A-N(S)-G4/2P air-cooled water recooler, year of manufacture 2017. Project number: 101048869 Device designation: S-GFHE 080.5/A-N(S)-G4/2P Device serial number: 404549442/19.02129 Year of manufacture: 2017 Cgjdpoy Akgyofx Agfju Ambient temperature min.: -30.0 °C Ambient temperature max.: +50.0 °C Volume: 116.2 l Permissible temperature (TS) min.: -50.0 °C Permissible temperature (TS) max.: +100.0 °C Test pressure: 11 bar Fan speed: 2,609 rpm Fan current: 22.4 A If you have any questions or require further information, please feel free to send us a message or give us a call.

Condition: used, As-new CNC Vertical Machining Center, Milling Machine VMC, BAZ, HSC Milling, Machining Center TAIKAN B540Z Serial No. 1171009 Year of manufacture: 2017 CNC path control: SIEMENS Sinumerik 828 D Basic Travel range for working area X: 488 mm, Y: 400 mm, Z: 230 mm X-axis travel for tool change position X: 540 mm Table size 520 x 400 mm Spindle taper ISO 25 Distance spindle nose - table 165 - 395 mm Max. spindle speed 36,000 rpm, infinitely variable Feed rate 0 to 10,000 mm/min Rapid traverse 15 m/min Table load capacity 200 kg Max. tool length 120 mm Max. tool diameter 80 mm Max. tool weight 0.8 kg Tool change time approx. 10 sec. Axis drives 0.8 kW each Spindle drive 3.5 kW at 100% duty cycle Electrical connection 400 Volt, 50 Hz, 7.5 kW CNC path control SIEMENS Sinumerik 828 D Basic - Software: NCU V04.05+SP06+HF01 - Interfaces: LAN, USB and CF-Card Cedpfx Aow Ed U Nogfogu - Measuring system for tool setting: METROL tool sensor - Vertical milling spindle = high-frequency spindle with liquid cooling and external recooling unit - Tool changer with 13 tool stations - Electronic handwheel - Coolant system - Protective enclosure with sliding door - Central lubrication - incl. 10 tool holders ISO 25 with ER20 collet chuck and a set of collets Transport dimensions (L x W x H): 1800 x 1500 x 2300 mm Weight: 2,900 kg Excellent condition – as new Machine comes from a showroom with very few operating hours.

Condition: used, Cooling unit Water recooling unit DALEX type DRF 2 Machine no. No. 38913719 Year of construction 1989 Volume flow 0.35 m3/h Cooling capacity 1950 Watt Operating pressure 2 to 3 bar Refrigerant R 134a Unit was converted from R12 to R134a Cgedpjg D H Ruefx Agfou Operating overpressure 18 bar Pipe connection thread 3/4" Tank volume 600 x 400 x 350 mm = approx. 80 liters Mains connection 380 Volt, 50 Hz Space requirement L x W x H 900 x 800 x 1020 mm Weight 100 kg Good condition