Used Radial for sale (855)

Condition: new, Year of construction: 2026, A large and stable radial drilling machine with a large range of revolutions which ensures precise and fast machining. Machine features Large weight and sturdy design ensure stability and vibration-free operation Cube table provides adjustability and easy fixture of workpiece Control panel located at the front of the machine for improved convenience Ground column surface provides easy, precise arm travel Machine equipped with manual head and column arm limiter Large speed range for accurate and quick machining Technical data Maximum drilling diameter 35 mm (cast iron); 30 mm (steel) Distance from spindle to base 360–1300 mm Ledpfji D Da Aex Abyeru Distance from spindle axis to column surface 260–1300 mm Spindle extension 200 mm Spindle taper MK4 Spindle speed ranges (6): 75, 130, 240, 380, 660, 1200 rpm Spindle feed ranges (3) 0.10; 0.16; 0.25 mm/turn Vertical arm travel speed 1.3 m/min Arm rotation 360° Main motor power 2.2 kW Lifting motor power 0.75 kW Worktable dimensions 510×380×305 mm Machine dimensions 800×1800×2150 mm Weight 1400 kg Default equipment B16 (3-16 mm) Drilling chuck B16/MK4 Drilling chuck mandrel MK4/MK3 reduction Wedge for taper removal The price is a net price. Price does not include shipping costs. For more information, please contact us by phone or e-mail. We invite you to familiarize yourself with the offer on our website.

Condition: used, Radial fan, low pressure fan, dust extraction fan, exhaust gas extraction, welding fume extraction, extraction, fan, pressure blower, vacuum blower, ventilation blower, blower, radial blower -Manufacturer: Elektror, radial fan low pressure fan type D-06/S 484 -Volume output: 10 m³/min -Fan wheel: Ø 170 x 90 mm -Speed: 2800 rpm -Inlet: Ø 105 mm -Air duct connection: 110 x 110 mm -Dimensions: 410/280/H365mm -Weight: 12.3 kg Lodpfeuqf Ilox Abyjru

Condition: used, Dust extraction fan, exhaust gas extraction, welding fume extraction, extraction, fan, pressure blower, vacuum blower, radial fan, ventilation blower, radial blower, blower Lsdpfsuqf Ufsx Abysru -Manufacturer: Karl Klein, blower radial fan type DNG 6-18 L -Engine power: 0.155 kW -Speed: 1400 rpm -Volume output: 18.5 m³/min -Fan wheel: Ø 160 x 80 mm -Connection input: Ø 145 mm -Connection output: 120 x 110 mm -Number: 3x blowers available -Price: per piece -Dimensions: 370/340/H320 mm -Weight: 8.1 kg/piece

Condition: used, fan, ventilator, electric motor, blower, electric motor, blower, radial fan, emergency ventilation fan, flue gas fan, axial fan, axial fan, axial fan -Manufacturer: Ziehl-Abegg, axial fan axial fan -Type: FA061-8EA.6F.1 -Power: 0.36 kW / 680 rpm -Number: 1x fan available -Dimensions: Ø 610 x 160 mm Lrodpfx Abouqq Scoyeu -Weight: 14.9 kg.

Condition: used, Dust extraction fan, exhaust gas extraction, welding fume extraction, extraction, fan, pressure blower, vacuum blower, radial fan, ventilation blower, radial blower, blower, fan -Fan: Radial fan -Type: unfortunately no type designation -Motor: 220/380 V -Fan wheel: Ø 120 x 50 mm Lredpfjuqq Sisx Abysu -Connection input: Ø 130 mm -Connection output: 65 x 80 mm -Dimensions: 220/200/H210 mm -Weight: 3.5 kg

Condition: used, Radial fan, chip extraction fan, fan, extraction, chip blower, fan wheel, blower, fan Ljdpfxsurn Sie Abyoru -Fan wheel: for extractor fan -Connection input: Ø 280 mm -Hole: Ø 12 x 33 mm -Dimensions: Ø 340 x 185 mm -Weight: 1.3 kg

Condition: used, Thermal system, fan heaters, heating elements, radial heaters -Manufacturer: Karl Klein, fan with heater: HVL 150 Ljdjrkp Nxjpfx Abyeru -Fan: Type ENG 3-6 K/S30 -Power: 100 W / 7.8 m³/min -Heating attachment: Type 8.0104 1500 W -Inlet: Ø 170 mm -Outlet: Ø 55 mm -Quantity: 3x blowers available -Price per piece -Dimensions: 280/250/H270 mm -Weight: 6.2 kg/piece

Condition: good (used), Year of construction: 1983, radial fan, dust extraction blower, fan, extraction, dust blower -Type: HL8-355/595-A -Motor power: 15 kW Ledpfsb A Siusx Abyoru -Speed: 2900 rpm -Volume flow rate: 10,000 m³/h -Total pressure: 3500 Pa -Inlet connection: Ø 350 mm -Outlet connection: Ø 350 mm -Dimensions: 2000/1000/H1350 mm -Weight: 260 kg

Condition: good (used), Radial fan, radial blower, radial fan, chip extraction blower, fan, extraction, chip blower, high-performance fan -Motor power: 15 kW -Inlet connection: Ø 350 mm -Outlet connection: Ø 250 mm -Dimensions: 1050/1060/H1240 mm -Weight: 276 kg Lredpfx Abeb Ig Ugsyeu

Condition: good (used), Radial fan, chip extraction blower, fan, extraction, chip blower -Engine power: approx. 22 kW -Speed: not visible -Volume flow: not visible -Inlet connection: Ø 280 mm Ljdpfxeb Iqf Ue Abyeru -Outlet connection: Ø 450 mm -Dimensions: 1050/900/H920 mm -Weight: 280 kg

Condition: as good as new (ex-display), Year of construction: 2005, ACCEPTANCE OF SELF feed head is held on the guides of hardened cylindrical surface and additionally treated grinding. Three-phase motor power 3HP 2800 rpm / min. Output frontal saw blades with cutting heads. Feed discs cost of delivery SEMI AUTOMATIC DOUBLE MITRE SAW Technical Data Right head displacement by means hand wheel Reading of the cutting dimension on high precision metric scale with micrometric adjustment Sliding of the moving head by means of ricirculating ball bearings on rectified and tempered guides Radial sliding of the sawing group Full protection of the sawblades by means of safety hoods with automatic closing Pneumatic heads tilting at 90°/+ 45°/-45° Possibilty to mount sawblades Ø 500 - 530 - 550 mm 2,2 Kw (3 HP) 3 phase motors - 2800 r.p.m. Sawblade shaft Ø 30 mm Cutting lenghts 4000/5000/6000 mm Working pressure 7 bar Overall dimensions 524-624-724x139x155 cm Weight 1200 - 1350 - 1500 Kg Standard Equipment Horizontal pneumatic clamps Automatic lubrication by means of nebulizer Air filter Air gun Service spanners Optionals Reading of the cutting dimension on digital display Turning vertical clamps kit Pneumatic central support Manual central support Right head in feed roller conveyor Semi-automatic reduced cut modification c/w in feed roller conveyor Vee notch device for PVC profiles Micro-spray nebulising device Pneumatic support for long bars cover customer Startup type negotiated Lredpfxsb Rnv Sj Abyju Description Notes Saw 2 a head for precision cutting of aluminum profiles GAMMA. Precise double miter saw for serial production of blanks at an angle of 90 ° and 45 °. Convenient and safe execution of multiple cutting operations. Automatic positioning of the moving cutting head. Automatic positioning of the moving cutting head. Adjustable stroke discs. The angles of inclination of the cutting head 45 °, 90 °, easy pneumatically. Intermediate angles are adjusted manually using the bumper and angular scale. LENGTH OF CUT = 4000 5220 x 1390 x 1460 mm Weight 1200 kg.

Condition: new, Year of construction: 2025, Model SLP-30/O Worksize dimensions 1200 width x 1800 height x 3000 depth Overall dimensions 1560 width x 2410 height x 3300 depth Power supply Electric Nominal power 27kW Voltage 380V Frequency 50-60Hz Door type: one sided Anti-Ex Schloss Homogeneity < ± 3.0°C if 180°C Lrjdpfebuyrnjx Abysu Temperature stability < ± 3.0°C Temperature max. 230° C Transport Ground (Rail in the floor) Heaters Exchangeable roof heating panels Circulation Vertical Ventilator Radial assembled on exchangeable panel Air flow Variable through holes on the walls Ventilation performance 1500m3/h Motor power 1,5kW Capacity 6480L Warranty 12 months

Condition: excellent (used), Spherical plain bearings, radial spherical plain bearings, ball bearings, for hydraulic cylinders -Condition: unused -Type: GE140UK-2RS -Number: 3x spherical bearings available Lsdpfx Asb A Hbmebysru -Price: per piece -Weight: 13 kg

Condition: good (used), Radial piston pump, hydraulic pump -Hydraulic motor -Drive shaft: Ø 22 mm -engine bell -Coupling: Ø 200 mm Lrodpfob A Ityex Abyju -Weight: 90 kg

Condition: ready for operation (used), Year of construction: 2022, operating hours: 1,729 h, spindle speed (max.): 4,500 rpm, spindle motor power: 15,000 W, overall weight: 3,700 kg, controller manufacturer: FANUC, controller model: FANUC 0i-TF, number of axes: 3, This 3-axis Goodway GLS-2000LYS was manufactured in 2022. It features a spindle speed of 4,500 rpm and a robust 12-station driven turret. The machine includes an 8" hydraulic chuck with a bar capacity of 65 mm and a 5" sub-spindle. If you are looking to get high-quality turning capabilities, consider the Goodway GLS-2000LYS horizontal turning machine we have for sale. Contact us for further details. • CNC control: FANUC 0i-TF (10.4" display with Manual Guide) • Working hours: 17,29H 24M 34S (operating time); Part count: 10,250 • Main spindle chuck/collet: 8" hydraulic cylinder, Bellegrandi BA70 collet chuck group (bar capacity 65 mm) • Sub-spindle: 5" sub-spindle with hydraulic cylinder and ejector, Bellegrandi BA70 collet chuck group • Axes: C-axis (main & sub-spindle with disc brake), Y-axis • Turret: 12-station driven turret • Tool presetter: Renishaw HPRA manual presetter • Coolant pump: 7 bar / 3 bar M-code switchable pump and Grundfos 3/4 HP pump • Power supply: AC 380 V, 3-phase, 50/60 Hz • Nominal capacity: 30 kVA • Main breaker current: 50 A Additional equipment • Chip conveyor with timer Ljdpfx Aez D E Ipsbyjru • Bar feeder (included) • 20x Bellegrandi BA70 collets • Driven tool holders: 4 double axial driven tools, 2 radial driven tools • RS232 interface • Electrical cabinet heat exchanger Technical Specification Counter Spindle Yes Driven Tools Yes

Condition: ready for operation (used), D'Andrea T100 Planing and Turning Head for Fehlmann SF32 Head diameter: 102mm Radial adjustment of the tool slide: 30mm Max. planing diameter: 200mm Max. speed: 1500 rpm Accuracy: 0.005 mm Net weight: 4.6 kg Tool holder: SF 32 Fehlmann You are welcome to visit us for an inspection. Lredpfx Aboz H Iz Doyou We can also arrange cost-effective shipping for you! You will receive a proper invoice. For foreign customers, a net invoice can also be issued, provided a valid VAT identification number is available. Subject to prior sale. Visit our shop and see our other offers. The company names and trademarks mentioned are the property of their respective owners and are used only for identification and description of the products. Deviations from technical data and errors in the description of the item may occur and are subject to change.

Condition: used, Year of construction: 1994, Suitable for simultaneous, automatic grinding of both tooth flanks on carbide-tipped circular saw blades. Accessories: Motorized rake angle adjustment, Coolant system, Automatic central lubrication, Machine light, 2 grinding wheel holders, 1 sawblade mounting bolt. Lsdpfx Aszgucdebyjru sheet thickness: up to 8 mm Tooth pitch: 6 to 120 mm rake angle: - 15° to + 25° Tangential free angle: 0° to 6° Radial free angle: - 4° to +6° Connection value: ca. 1,1 kW (400 V / 50 Hz) Weight: about 1150 kg Grinding wheel diameter: Max. 125 mm Bore diameter: 32 mm Dimensions L x W x H: 1340 x 1400 x 2000 mm colour: green Circular saw outer diameter: 80 to 460 mm

Condition: refurbished (used), Year of construction: 2005, functionality: fully functional, machine/vehicle number: 106357-11, total length: 3,140 mm, total width: 1,800 mm, total height: 2,470 mm, overall weight: 3,500 kg, type of input current: AC, input voltage: 400 V, The machine was equipped with a new machine control system in 2024 and underwent a complete mechanical overhaul in 2025. The extensive overhaul involved the replacement of almost all essential components. As a result, the machine is in almost new condition technically. New control system in 2024: - SIMATIC S7-1500 PLC control system - SINAMICS S120 drive system Mechanical overhaul in 2025: - New tailstock housing, drill bush holder, and spindle housing - New workpiece support and tool support - 2x high-frequency spindles - 2x tool holders - 2x rotating collet chucks - Quill, including bearing - Ball screw drive, including bearing - Linear guides - Radial piston pump - Water cooler - 2x drilling oil supply - Flow divider - Pipelines and hoses replaced - Various filters replaced - Complete repainting Optional: - Chip conveyor can be retrofitted Oil mist extraction: - Connections are available Tool accessories: - Individual design possible according to customer requirements/customer workpiece. Ljdpfx Aboz Irfvjyeru The deep hole drilling machine uses the single-lip drilling process. Information on the drilling unit: - Drilling diameter min/max: 1-12 mm based on ST 60 - Drilling depth: approx. 400 mm - Number of spindles: 2 - Spindle spacing: 120 mm - Spindle drive: 2 x 3.5 kW - Spindle speed, continuously variable: 1000 - 20000 1/min - Feed rate, continuously variable: 10 - 15000 mm/min - Rapid traverse: 15000 mm/min - Slide stroke (nominal): 800 mm - Center height (above table): 100 mm - Coolant supply: Deep hole drilling oil Machine frame: - Welded construction with integrated coolant tank - Top of the frame with continuous linear guide rails Spindle unit: - Motor spindles with frequency-controlled, continuously variable speed control. - Spindle head with connection for tool holder. Drill bush holder: - In cast design, fixed on the machine bed. - Holder for tool guidance system with Ø50 mm - Holder for sealing housing and immersion sleeves with bayonet lock Rotating tailstock: - With drive for rotating workpiece - Clamping quills with workpiece length compensation Inspection of the machine and further information are available on request.

Condition: good (used), Radial fan, dust extraction blower, fan, extraction, dust blower, blower, exhaust fan Lsdpoz Hvicjfx Abyjru -Dust extraction fan: Radial fan EX protected -Motor: AEG 7.5 kW 2935 rpm -Connection: Inlet Ø 160 mm -Connection: Output Ø 140 mm -Fan wheel: Ø 700 x 50 mm -Volume flow rate: m³/h -Dimensions: 890/760/H960 mm -Weight: 180 kg

Year of construction: 1988, condition: good (used), Radial fan, high-pressure radial fan, dust extraction blower, exhaust gas extraction, welding fume extraction, extraction, extraction blower, fan, pressure blower, vacuum blower, ventilation blower, blower, radial blower Lsdpfxoz Hvv As Abyeru -Manufacturer: Norfab, radial fan, extraction blower -Type: E 450 L 65 -Motor: Schorch 18.5 kW 2935 rpm -Volume flow rate: 16000 m³/h -Total pressure: 3000 Pa -Inlet connection: Ø 450 mm -Outlet connection: Ø 500 mm -Fan wheel: Ø 640 x 290 mm -Protection class: IP 54 -Dimensions: 1500/1150/H1270 mm -Weight: 478 kg

Year of construction: 1986, condition: good (used), Radial fan, high-pressure radial fan, dust extraction blower, exhaust gas extraction, welding fume extraction, extraction, extraction blower, fan, pressure blower, vacuum blower, ventilation blower, blower, radial blower -Manufacturer: Rippert, radial fan, extraction blower -Type: HL8-560-A -Volume flow rate: 22800 m³/h -Total pressure: 4200 Pa -Motor: Schorch 37 kW 1470 rpm -Inlet connection: Ø 560 mm -Outlet connection: Ø 560 mm -Fan wheel: Ø 940 x 200 mm -Protection class: IP 54 Lodpfx Aoz Ehd Ajbyoru -Dimensions: 2830/1230/H1700 mm -Weight: 950 kg

Condition: excellent (used), functionality: fully functional, Offer: Like-new turning tool holders VDI40 turning tool holder Tool holders, VDI40 tool holders. The holders have been inspected and are in very good, almost new condition. The outstanding quality of well-known manufacturers confirms the high repeatability and a very long service life. ----- Order number: 435_C1 → In stock: 2 pieces; Price: €56.00/piece Order number: 430_C2 → In stock: 3 pieces; Price: €56.00/piece One tool holder has been ground on the underside (see picture), but this does not affect its functionality. Order number: 432_B4 → In stock: 2 pieces; Price: €56.00/piece Order number: 433_B4 → In stock: 2 pieces; Price: €56.00/piece For orders of 4 pieces or more, the above prices apply, including shipping costs within Germany. ----- B3 with right-hand rotation; B4 with left-hand rotation C1 with right-hand rotation; C2 with left-hand rotation ----- Short, reversed VDI radial tool holder. Tool holder for mounting external turning tools in the normal position, i.e., with carbide inserts facing upwards: C1 with right-hand rotation; C2 with left-hand rotation. Shipping costs: upon request. ----- Dimensions: D = 83 mm d-2 = 83/40 mm (45.52) H = 32.5 mm L1 = 75 L2 = 22 l-4 = ----- More VDI40 holders can be found in our other offers, e.g., VDI40 form E2. For boring tools with cylindrical shanks, with internal and external coolant supply. Surface hardened, blued, and ground. Lodpfoz Hn Rrox Abyeru

Condition: excellent (used), Year of construction: 2021, HT45-G3-SM2Y/FANUC WITH POWERED TOOLS AND Y-AXIS CNC turning machine for complete machining of turning-milling parts with 2 spindles, 2 tool systems, 6 linear axes and 2 rotary axes, integrated spindle motors on main and counter spindle (water- cooled), pre-tensioned roller guides. Drive power: Main spindle - 15 kW Counter spindle - 15 kW Speed range: Main spindle 0 – 7000 min-1 Counter spindle 0 – 7000 min-1 Spindle connection (DIN 55026): Main spindle: KK 5 (max. bar diameter ø 45 mm) Counter spindle: KK5 Y-axis: • Travel range: +40/-40 mm • Rapid traverse speed: 15 m/min Includes: • Draw tube on the main spindle • Pull rod for the main/counter spindle • Mechanical spindle brake (main/counter spindle) • Part ejector and flushing through the counter spindle • Fanuc 31i-B control - EMCONNECT/APP based user Lrjdpfxez Rzh Ho Abyju interface - Manual Guide i dialog programming - 22" Multi-Touch Display - USB interface - Network drive / Ethernet - 3D Simulation - LED status bar, and more • 2x 12-position tool turret VDI 25 radial with direction logic for up to 2x12 powered tool stations (HSC turret)! Swivel speed adjustable with feed switch! Performance data: - Max. speed: 8000 rpm - Max. continuous speed: 6000 rpm - Max. drive power: 4 kW - Max. torque: 16 Nm - C-axis for main and counter spindle - TRANSMIT software for easy C-axis programming • Chip conveyor with a discharge height of 1100 mm, programmable (Type "hinge belt") • Coolant system integrated in the chip conveyor 2 high-pressure pumps with 14 bar 2 flushing pumps with 3.7 bar • Air gun with spiral hose • LED machine room light • Hydraulic unit • Vibration-damping leveling feet • Mounting angle and high-performance anchors • Documentation / CE certificate Year of construction: 2021 Machine no. S3K212051 Includes: various accessories

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, rotary table diameter: 450 mm, position of the milling head: Schwenkbar (45°), table diameter: 450 mm, total length: 5,600 mm, gear diameter: 500 mm, total height: 3,100 mm, total width: 3,600 mm, input frequency: 50 Hz, type of input current: three-phase, spindle speed (max.): 340 rpm, table bore: 125 mm, spindle speed (min.): 80 rpm, travel distance X-axis: 325 mm, travel distance Y-axis: 200 mm, travel distance Z-axis: 400 mm, overall weight: 14,800 kg, distance table to spindle center: 350 mm, tool diameter: 200 mm, controller manufacturer: Siemens Sinumerik 840D sl, drive type: Sinamics S120, control type: CNC control, Equipment: documentation/manual, rotational speed infinitely variable, A Pfauter PE 500 for the economical production of straight and helical spur gears up to module 12 and 500 mm in diameter – completely overhauled by SerWeMa with Siemens Sinumerik 840D sl, equipped with a gripper unit and a 32-position workpiece storage for unmanned operation. The machine is ready for operation in our hall in Chemnitz: you can inspect it under power, and if desired, we will mill your own sample part and you can take delivery of the machine here. No delivery time, no risk. Sold by Serwema Retrofit Solutions, the company that carried out the overhaul and knows the machine inside out. The general overhaul included complete geometric overhaul by grinding and scraping, new roller bearings in the main drive and in the milling head, measuring and reconditioning the worm gear, overhauled or new ball screw drives, overhaul of hydraulics, lubrication and coolant system, and new electrical equipment with Sinumerik 840D sl, Sinamics S120 and new axis motors. An electronic generating gear controls all generating and single-part machining processes, and an NC-controlled crash recovery protects the tool and workpiece in the event of a power or phase failure. New paint in RAL 7035/5015 with oil and coolant resistant two-component paint, acceptance of geometry according to SerWeMa protocol based on DIN ISO 6545. Lrodpfx Absz Et E Eeysu The machine controls six CNC axes: X radial, Y tangential, Z axial, A milling head swivel, B milling cutter drive and C table drive. The SerWeMa gear cutting software guides you through workpiece and tool data via masks, without the need for programming: up to three position-oriented gearings per workpiece, each with its own tool, up to three cuts per gearing with simultaneous or counter-rotating movement, form corrections for convex, conical and convex-conical profiles, lead-in and lead-out phase correction, chamfer milling, dimension correction via tooth width, two-roll or two-ball gauge, measuring stop, shift strategy with defect management per generating cutter and cutting force monitoring with automatic retraction. Technologies: generating milling, single-part milling and worm gear milling both radially and tangentially. A hand-held device with a handwheel allows setup directly in the working area. Technical data: max. workpiece Ø 500 mm, max. module 12, max. milling cutter Ø 200 mm, max. milling cutter length 240 mm, shift travel 200 mm, milling cutter speed 100–450 rpm, swivel angle +25°/−45°, travel radial 325 mm (axis distance 25–350 mm), travel axial 400 mm (310–710 mm), table diameter 450 mm, table bore 125 mm, connection power approx. 60 kVA. Installation dimensions incl. automation approx. 7.2 × 4.5 × 3.3 m, weight approx. 16.8 t. Equipment: machine enclosure, chip conveyor, gripper unit with two grippers, workpiece storage with 32 positions, preparation for emission extraction (150 mm nozzle, Harting connector on the machine roof). Documentation complete in German: operating manual, electrical diagrams with parts lists, hydraulic and lubrication diagrams. Serwema optionally offers: trial part milling in our factory, additional milling arbors, assembly and commissioning at your location, operator training and a control system upgrade to Sinumerik ONE. Spare parts and service come from a single source, worldwide, even after the purchase.

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, Kasto Kastodisc M10 Vertical Circular Saw, Metal Cutting Saw Ljdpfx Abjztyldjyeru Manufacturer: Kasto Type: Kastodisc M10 Metal Cutting Saw Year of Manufacture: 2009 Condition: Used, very good, ready for demonstration Scope of Delivery: - Documentation - Coolant system - 1 x Saw blade (used) - Material stop, 1000 mm