Used Rack Milling Machine for sale (68,759)

Condition: good (used), Year of construction: 2017, operating hours: 9,380 h, functionality: fully functional, machine/vehicle number: 4455, Numerically controlled machining center max. panel sizes: 4,000 x 2,300 mm Dedpfxor E D Eae Apvewb 1 Kuka KR420R3300 robot 1 Kuka KR200L140 robot 1 Kuka KRL140-3Comp robot Conveyor belt for removing the scrap metal Suction Ruwac Zone 22

Condition: used, Year of construction: 1980, hobbing length 1750 mm milling width 260 mm max. module 10 min. module 12 total power requirement 8 kW weight of the machine ca. 4500 kg dimensions of the machine ca. m D O N A U - K N A P P (Germany) Universal Automatic Rack Milling Machine Model UZFM – V 300 H Dsdpot Hxagefx Apvewb Year approx. 1980 Serial No. 80-234x Max. length of rack 1,750 mm Milling travel / milling width cross max. 260 mm Module, steel / cast iron 10 / 12 Table clamping size 275 x 1,850 mm Mounting height below cutter, depending on cutter Ø 136 – 410 mm Cutter Ø, min./max Ø 125 + 2 x cutting depth / Ø 160 mm Cutter width max. floating / with support 50 / 140 mm Cutter mandrel Ø max. 50 mm Milling spindle head, swivelling right / left 30 / 45 ° 9 spindle speeds 22 – 179 rpm Milling slide swivelling right / left 30 ° Feeds, infinitely variable (milling slide) 0 – 600 mm/min Quick return 2,000 mm/min Milling spindle drive approx. 4 kW Total electrical load 8 kW - 400 V - 50 Hz Weight 4,500 kg Accessories / Special Features: * Automatic milling cycle control via cam bloc mounted on milling slide and table slide with possibility of jump switching (= automatic by-pass of an area which should not be milled) and pendulum milling operation (= synchronized milling on the first half of table, and workpiece change on the second half. * hydraulic workpiece clamping device: 1.800 x 260 mm each, clamping width 140 mm, clamping height inside the device 60 mm, with own hydraulic aggregate, hand switch, * Manual fine adjustment of table (0.001 mm) for exact positioning in a pre-milled rackgear. * Various change gears (approx. 10 pieces). * 2 cutter mandrels. * Various other accessories. * Central lubrication. * Built-in hydraulic unit. * Simple Coolant device. Separate switch cabinet, various rack cutter up to 160 dia. This machine is especially suitable for milling racks, and also for manufacturing broaching tools (relief milling is possible by swivelling the cutter head). Condition : Very good. Machine can be inspected under power. Delivery : Ex stock, as inspected Payment : Net, after conclusion of contract

Condition: good (used), Year of construction: 2017, operating hours: 60 h, functionality: fully functional, machine/vehicle number: 333840, travel distance X-axis: 450 mm, travel distance Y-axis: 200 mm, travel distance Z-axis: 510 mm, spindle mount: MK 3, quill travel distance: 120 mm, type of input current: three-phase, table width: 210 mm, input voltage: 400 V, table length: 750 mm, drilling capacity: 32 mm, distance table center to spindle nose: 275 mm, rotational speed (max.): 3,200 rpm, rotational speed (min.): 95 rpm, rapid traverse X-axis: 240 m/min, Equipment: documentation/manual, The milling machine is fully functional and can be tested. It is being sold due to the purchase of a larger model. Technical documentation is available. The milling machine has a robust base cabinet housing the coolant pump. The automatic table feed features: - Emergency stop function, no automatic restart Dedpfx Apoyrib Tovewb - Infinitely variable speed control and rapid traverse - Left/right feed direction - Overload protection and limit switches - Speed: 0 - 165 rpm - Rapid traverse: 240 rpm Three-axis position display, accuracy class 0.01 mm.

Condition: like new (used), Year of construction: 2015, functionality: fully functional, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,200 mm, travel distance Z-axis: 1,500 mm, rapid traverse X-axis: 20,000 m/min, rapid traverse Y-axis: 20,000 m/min, rapid traverse Z-axis: 20,000 m/min, position of the milling head: 0.001, spindle speed (max.): 3,500 rpm, table width: 1,500 mm, table load: 10,000 kg, table length: 1,500 mm, type of input current: three-phase, workpiece weight (max.): 10,000 kg, overall weight: 26,000 kg, input voltage: 400 V, LAGUN GORATU GTM 3 MILLING MACHINE (TYPE T) TECHNICAL SPECIFICATIONS Brand: Lagun Model: GTM3 Year: 2016 CNC: Heidenhain iTNC 530 Table: 1500 x 1500 mm X: 3000 mm Y: 1200 mm Z: 1500 mm V (Column cross travel: 1000 mm Automatic milling head - ISO 50 Spindle speed: 4,000 rpm Rotary table (capacity 10 tons) Internal coolant system: 40 Bar Spindle power: 28/34.5 Kw Coolant filter PRICE AND FURTHER INFORMATION AVAILABLE UPON REQUEST Dedpfoy T Sffox Apvowb (CNC, SIEMENS, HASS, LAGUN, FAGOR, CINCINNATI, HEIDENHAIN, MACHINING, PINACHO, MORISEIKI, MILLING MACHINE, LATHE, GRINDER, BORING MACHINE, PRESS, LASER, SHEAR, PRESS BRAKE)

Condition: excellent (used), Year of construction: 1991, functionality: fully functional, Deckel FP 1 MK Aktiv TNC 113 Year of manufacture: 1991 Spindle speeds: 40 - 2000 rpm, SK 40 Travel ranges: X 300, Y 160, Z 340 Stepless feed rate + rapid traverse in all axes Weight: approx. 880 kg Accessories: fixed angular table (optional universal table), electric central lubrication system, direct collet chuck set, 8 tool holders SK 40, machine vise Röhm, coolant system, machine feet, chip tray, documentation. Condition: Original, not repainted, smooth operation at all spindle speeds and axis movements, guides in perfect condition. Of course, the machine can be inspected while powered on. Free loading at D - 88433 Schemmerhofen. Dwodpfx Apjzy Rlnsvsb

Condition: excellent (used), functionality: fully functional, machine/vehicle number: 140569, Table: 600 x 300 mm Travel ranges X / Y / Z: 400 / 300 / 350 mm Spindle mount: SK 40 Spindle speeds: 50 - 2500 rpm Drive power: 2.2 kW Accessories: Dwsdpfx Apszvqnnsvjb Vise, dividing head, rotatable vertical milling head, HEIDENHAIN for X Y Z Weight: 1,500 kg Machine dimensions: L 1485 x W 1475 x H 1680 mm Operating manual in German

Condition: ready for operation (used), Year of construction: 1989, Available immediately from location: MAHO Toolroom Milling Machine Type MH 500 M Year of manufacture 1989 Heidenhain Digital Display Table 800 x 360 mm SK 40 Spindle speeds 63 – 4000 rpm Quill stroke 50 mm Travel X/Y/Z 500/380/350 mm Drive 3 kW Feed rates 10 – 1000 mm/min Coolant system Weight 1600 kg Adapters Hydraulic vise Price: €3,000 plus VAT, ex location Dwodpozwud Njfx Apvsb

Condition: good (used), Year of construction: 1990, Table milling machine with power feed Tilting spindle Dwedsyy I R Rjpfx Apvjb With table extension on both sides

Condition: used, Year of construction: 1989, Universal CNC Milling Machine MAHO MH 600 E2 Travel X: 600 mm Travel Y: 400 mm Travel Z: 450 mm Numerical Command CNC PHILIPS 432 Cone SA40 Spindle speed: from 20 to 4000 RPM Djdpfx Aszy Rruopvowb Table size: 900 x 480 mm TravelSpindle sleeve travel: 80 mm Year of construction: 1989 1 lubricant tank Voltage: 380 V Width: 2500 mm Depth: 2400 mm Total height: 2000 mm Weight: approx 3,5 T

Condition: used, Year of construction: 1991, CNC Vertical Milling Machine RAMBAUDI type RAMMATIC 600 Travel X 1260 mm Travel Y 690 mm Travel Z 600 mm Numerical Command NUM 1060 Cone SA 50 Dwodpfx Apezy Eg Hsvsb Table size 2000 x 600 mm Year of construction 1991 Voltage 380 V Depth 2500 mm Total height 4000 mm Weight: approx 9 T

Condition: good (used), Year of construction: 1995, Milling machine Dwsdpfxsp Nnp Se Apveb

Condition: used, Year of construction: 2007, total height: 2,550 mm, total width: 3,700 mm, total length: 5,250 mm, workpiece weight (max.): 3,000 kg, overall weight: 8,000 kg, power: 22 kW (29.91 HP), MTE K-15 Bed Milling Machine Technical Specifications: Clamping Surface: 1,700 × 750 mm Spindle Speed: 40–3,000 rpm Tool Clamping Force: 1,500 daN Milling Feed Rate: 0–12,000 mm/min Positioning Feed Rate: 15 m/min Positioning Accuracy: < 0.012 mm Repeatability: < 0.007 mm Machine Weight with ATC: approx. 8,500 kg Tool holder type: SK 50 DIN 2080 Dimensions (LxWxH) approx.: 5250 x 3700 x 2550 mm Weight approx.: 8,000 kg Travel Y-axis: 800 - mm Power: 22 kW Control: Heidenhain Travel Z-axis: 800 - mm Component weight max.: 3,000 kg Dsdozzk Huspfx Apvewb Travel X-axis: 1500 - mm Year of construction: 2,007 Condition: in working order Terms of payment: to be agreed upon Terms of delivery: Loaded on truck under power: No

Condition: used, Year of construction: 2018, functionality: fully functional, machine/vehicle number: SN 018-0212, travel distance X-axis: 4,000 mm, travel distance Y-axis: 580 mm, travel distance Z-axis: 700 mm, spindle speed (max.): 2,200 rpm, spindle speed (min.): 140 rpm, rapid traverse X-axis: 20 m/min, rapid traverse Y-axis: 6 m/min, rapid traverse Z-axis: 6 m/min, controller model: Penta-Tec, overall weight: 6,000 kg, nominal power (apparent): 12 kVA, number of slots in tool magazine: 10, We are offering this used BAUER Bohrmax Z40 vertical machining center, manufactured in 2018, for sale. Manufacturer: BAUER Model: Bohrmax Z40 Year of manufacture: 2018 SCOPE OF DELIVERY / TECHNICAL DATA: • Spindle speed range: 140-2200 rpm • Drive for X, Y, Z axes: servo motor • Rapid traverse X-axis: 20 m/min • Rapid traverse Y-axis: 6 m/min • Rapid traverse Z-axis: 6 m/min • Distance from top of table to bottom of tool holder: 700 mm • Tool holder: SK40 • Tool changer for 10 tools • T-slots: M12 Dwsdpfozlp T Iox Apvjb • Drilling diameter: 3-32 mm • Thread drilling: M4 - M24 • Tolerance X-axis: ± 0.1 mm • Tolerance Y and Z axes: 0.06 mm • Drive motor for spindle: 7.5 kW • Light curtain at the front • Control: Touchscreen 18” • Chip conveyor with slat conveyor additional integrated equipment: • Automatic tool length measurement • Handheld control unit RCS01 • Software extension for pendulum operation + DXF package • Universally controllable hydraulic clamping system with 8 clamping points (manufacturer Polund - Pro-Clamp Systems) If you have any questions or require further information, please send us a message or call us.

Condition: excellent (used), Year of construction: 2008, machine/vehicle number: 1780021272, functionality: fully functional, 3 spindle copy router elumatec KF 178/00 Top routing unit: Cutting range using stops or copy templates 340 x 100 mm Travel 110 mm Bottom routing unit: Cutting range using stops or copy templates 240 x 85 mm Travel at front 95 mm Travel at back 45 mm Spindle speed 12,000 rpm Djdpfx Aezy Stajpvjwb Clamping range for profiles 115 x 100 mm Power supply 230/400 V, 3~, 50 Hz Power output per motor 0.74 kW Cobtjzmn N Reiaf Smorg Compressed air supply 7 bar Air consumption per working cycle 12 l without spraying, 24 l with spraying Length 980 mm, depth 1,250 mm, height 1,610 mm, weight 360 kg We can ship the machine to your address.

Condition: like new (used), Year of construction: 2023, functionality: fully functional, For sale is a Felder F-700 Z milling machine with 4 spindle speeds. The machine is used as a showroom model at our facility and can be considered as new, with full warranty/guarantee. Dwsdpfx Aswp Ri Uepveb Technical specifications: - 4 milling speeds - Milling spindle tiltable 90° - 45° - Milling fence for tools up to Ø 230 mm - Multi-adjustment system - Tenoning and slotting table - Motor power 5.5 kW / 7.5 HP, SD start - Year of manufacture: 2023 / as new The machine is located at A-8561 Söding and can be inspected at any time during our opening hours. Subject to prior sale! Info Tel.: 03137-3109 Related terms: milling cutter, milling machine, milling Reference: R-D1618

Condition: excellent (used), Year of construction: 2021, operating hours: 8,000 h, travel distance X-axis: 1,050 mm, travel distance Y-axis: 550 mm, travel distance Z-axis: 520 mm, spindle speed (max.): 12,000 rpm, total height: 2,778 mm, total width: 2,977 mm, total length: 3,635 mm, overall weight: 6,700 kg, workpiece weight (max.): 800 kg, - Control system: SIEMENS 828 D Dwjdszx U Nzspfx Apveb including OPERATE and ShopMill - Number of magazine positions: 30 - Tool interface: BBT 40 - Internal cooling: 20 bar - Tool weight: max. 8 kg - Tool change time: 3 s - Chip-to-chip time: 5.5 s - Blum tactile probe ZX-Speed IR - Blum 3D measuring probe TC-52 LF

Condition: good (used), TOS FGHE 32 milling machine Brand: TOS Model: FGHE 32 Dwsdpfxezyy Npo Apvsb Control: Conventional Table dimensions (mm): 1250 x 320 mm X-axis travel (mm): 900 mm Y-axis travel (mm): 300 mm Z-axis travel (mm): 450 mm Feeds: X, Y, Z Rapid travels: X, Y, Z Spindle connection: ISO 50 Coolant system: Yes Dimensions L x W x H (mm): 1900 x 2400 x 1950 mm Machine weight (kg): 2800 kg Note: Digital display is defective.

Condition: refurbished (used), functionality: fully functional, Internal article number: 26083 Universal milling machine Deckel FP3 aktiv Refurbished by FPS + Machine lamp / protective cover Dodpfx Aozxg H Eopvowb The machine comes from a training workshop and is in very good condition.

Condition: good (used), Stegherr Dedpfjzakw Eex Apvowb 2 motors, each approximately 2.2 kW Connected load approximately 4.5 kW Compressed air 6 bar Voltage 380 V, 50 Hz

Condition: used, functionality: fully functional, For sale is a Deckel Maho MH 600 CNC milling machine with a Philips/Grundig CNC 532 control system. The machine comes from our own machinery stock and can be inspected on-site by appointment. This is a robust CNC milling machine from Deckel Maho with an enclosed work area and a large T-slot clamping table. Technical data / features: * Manufacturer: Deckel Maho * Model: MH 600 * CNC milling machine / machining center * Control system: Philips/Grundig CNC 532 * 3 CNC axes * Travel range X: approx. 600 mm * Travel range Y: approx. 450 mm * Travel range Z: approx. 450 mm * Tool holder: SK40 * Coolant system * Enclosed work area * T-slot clamping table Important regarding the features: * No automatic tool changer * No chip conveyor * Tool changes are performed manually The Hilma machine vises shown in the photos are not included in the price. The machine is particularly suitable for single-part production, toolmaking, repair work, as well as small and medium-sized series. An inspection and demonstration can be arranged by appointment. Additional photos and information are available upon request. Dsdpezwv Aaofx Apvewb The stated selling price is NET, plus 20% VAT. VAT can be shown separately. Subject to prior sale and errors.

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, travel distance X-axis: 6,000 mm, travel distance Y-axis: 3,200 mm, travel distance Z-axis: 1,400 mm, table length: 6,000 mm, table width: 3,000 mm, spindle speed (max.): 24,000 rpm, distance between stands: 4,000 mm, Technical Specifications • Table clamping area: 6,000 × 3,000 mm • X-axis (longitudinal travel): 6,000 mm • Y-axis (cross travel): 3,200 mm • Z-axis (vertical travel): 1,400 mm • Distance between columns: 4,000 mm • Feed speed: 30,000 mm/min • Table load: 4,000 kg/m² • Max. spindle speed: 24,000 rpm • Max. spindle power (S1-100%): 42 kW • Max. spindle torque (S1-100%): 67 Nm • Tool holder: HSK63A • Tool changer: 24 positions • C-axis: ±360° Dedpsxlip Asfx Apvewb • A-axis: +95° / -110°

Condition: like new (used), functionality: fully functional, Tool milling machine Deckel FP 4 MK Type 2203 Dodpfx Apjzvxlhevswb Equipped with a hydraulic tool clamping system and central lubrication.

Condition: good (used), Universal tool milling machine Mikron WF 2 Manufacturer: Mikron Dwedozw U Nfspfx Apvsb Type: WF 2 Machine category: Universal tool milling machine Spindle speeds: 12 Speed range: 50–2240 rpm Spindle speed step: 1.4 Feeds: 18 Feed range: 8–400 mm/min Feed step: 1.25 Rapid traverse rate: 1400 mm/min Milling spindle motor: 2-speed, 1.2/1.8 kW at 1400/2800 rpm Feed motor: 0.55 kW at 1400 rpm Coolant pump motor: 0.1 kW at 2800 rpm Longitudinal travel X: 420 mm Transverse travel Y: 250 mm Vertical travel Z: 335 mm automatic / 340 mm manual Vertical travel with optical measuring system: 300 mm automatic / 310 mm manual Clamping surface of fixed angle table: 250 × 700 mm Machine weight with vertical milling head and angle table: approx. 770 kg Weight with all accessories: approx. 1250 kg Position indicator: digital for X/Y/Z Machine vice: included Tool holders and collets: extensive range of accessories available Operating manual: included No guarantee is given for the accuracy, completeness, or up-to-dateness of the information provided.

Condition: not inspected (used), JAFO FYN 50 NB – CNC Vertical Milling Machine For sale is a CNC vertical milling machine from JAFO, model FYN 50 NB, year of manufacture 1988. The machine is fully operational and ideal for precise milling operations on workpieces up to 700 kg including clamping device. ⸻ Technical Data • Travel (X/Y/Z): 800 × 500 × 500 mm • Table working area: 500 × 1,400 mm • Number of T-slots: 7 • Slot width: 18 mm • Slot pitch: 63 mm • Max. longitudinal table travel: 800 mm • Max. vertical knee travel: 500 mm • Max. transverse spindle head travel: 500 mm • Feed rate: stepless 0–4,000 mm/min • Spindle taper: ISO 50 • Head swivel angle: ±45° • Distance spindle axis to vertical guides: max. 590/90 mm • Spindle speed: 56–1,800 rpm • Rapid traverse: 4,000 mm/min • Spindle drive motor power: 5.5 kW • Operating voltage: 380 V, control voltage 24 V • Total power consumption: 10 kW • Dimensions (L×W×H): 2,080 × 1,700 × 2,260 mm • Total weight incl. hydraulic unit: 4.5 t ⸻ Equipment & Features • Vertical, swivelling milling spindle on a transversely adjustable ram • Hydromechanical tool clamping system • Separate feed drives with DC motors and permanent magnets • Power transmission via toothed belt to preloaded ball screws • Automatic lubrication system for spindle drive and guideways • Hydraulic counterweight for the knee • Manual adjustment via electronic handwheel • Heidenhain control at the swivelling control panel, control cabinet mounted on the machine base • Documentation and operating manual included • Additional images and videos available upon request ⸻ The machine is immediately ready for operation. • Inspection possible at any time • Europe-wide transport available ⸻ Contact Maschinenhandel Nord Gerstenstraße 2 17034 Neubrandenburg 📞 All prices net plus VAT. Subject to modifications and errors. Dsdpfxoxk Tzgs Apvswb

Year of construction: 2012, condition: used, Elumatec AF 222 End Milling Machine, the Machine Transoms & Door Profiles in Aluminium or Plastic, Cutting Range up to 400mm, Tool Diameter up to 280mm. S/No. 2220025315 (2012). Country of Origin: Germany Dedozqdw Eopfx Apvowb Location: These lots are located in Burton-on-Trent, UK. Please see individual lot for loading information and charges.