Used Ra 630 for sale (16,715)

Condition: as good as new (ex-display), Year of construction: 2025, Special price for our demonstration machine Another machine, available now (ex works in Neckartailfingen) Approx. 8 operating hours. Suitable for shredding all types of leftover wood and also pallet sections. The pallet would need to be prepared with a jigsaw or chainsaw so that it fits vertically into the hopper - see Figure 2. Ideally, it would be approximately 40x20x20 cm so that the wood can lie flat on the slider floor. This is where the machine works most effectively. A hydraulic slider runs at the bottom of the shredder, which pushes the wood against the rotor depending on the load. The material is shredded until it passes through the screen basket. Throughput up to 200 kg per hour *depending on the screen and how well the material is prepared. *Conveyor belt and overhead magnet available at an additional cost. + Powerful 18.5 kW motor, + Concave blades, + Large high-performance gearbox, + Special, load-dependent slide control, Customs tariff number: 84659600 Motor: 18.5 kW; 400 V - 50 Hz - 3 phase Blades: 15, multi-rotatable Option: double row of blades + €995 net Rotor diameter: 260 mm Control: Siemens S7-1200 PLC Cutter opening: 630 x 820 mm Filling volume: approx. 0.6 m³ Hydraulic slide gate Screen perforation of your choice (10 - 30 mm) Suction nozzle diameter: 160 mm Weight: approx. 1,300 kg (depending on accessories) Dimensions (L x W x H): approx. 1,737 x 1,167 x 1,650 mm Moisture content: 30% dry Included as standard: - V-rotor for maximum throughput - Control cabinet with Siemens PLC control - Automatic star/delta start-up - Fast hydraulics - Auto. OFF when the rotor is idling - Speed 70-90 rpm for high throughput - Cyclic control to avoid idle times - Performance-enhancing step control of the hydraulic slide - Pertinax guides for the hydraulic slide - Vibration-damping machine feet - CE compliant. - MADE IN GERMANY . Shredder options: - Raise shredder by 30 cm (prepared for conveyor belt) +€2,080 net - Articulated conveyor belt +€8,770 net Horizontal section: 1,200 mm Rising section: 2,500 mm Angle: adjustable from 0-60 degrees Discharge height: approx. 2,000 mm + - 100 mm Bcedpfx Aodwktkef Eou - Overbelt magnet +€5,980 net - Conveyor belt and overbelt magnet control +€2,750 net (Start and stop synchronized with the shredder) - Extend hopper +€940 net - Eco-rings: +€1,980 net (recommended for more than 15% hardwood) - Special scraper +€990 net (recommended for veneer or paper) - Double Knife series + €995 net . Raw material requirements: - The moisture content (dry) must be below 30% - Metals and mineral contaminants such as sand, stones, etc. lead to increased wear.

Condition: good (used), Year of construction: 2017, functionality: fully functional, grinding length: 630 mm, grinding width: 330 mm, electro magnet plate coolant device Technische Daten / technical details: Bcodpfjudv Hwox Af Eju gr. Schleiflänge / max. grinding length 630 mm gr. Schleifbreite / max. grinding width 330 mm Magnetspannplatte / magnet clamping plate 630x300 mm Längsweg Tisch / longitudinal travel table 765 mm Schleifscheibenabmessungen / grinding wheel dimensions 400x40x203 mm Antriebsleistung / drive capacity 7,5 kW Gewicht der Maschine / weight 2800 kg Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich - Technical data, accessories and description of the machine are not binding.

Condition: good (used), Year of construction: 2008, travel distance X-axis: 630 mm, travel distance Y-axis: 765 mm, travel distance Z-axis: 510 mm, CNC control Mazatrol Matrix 2-fold pallet changing device NC-swivel rotary table 80-fold tool changer high pressure coolant through the spindle 20bar chip conveyor Bcodpetp Hgzjfx Af Eeu Technische Daten / technical details: Verfahrweg X / X-Travel 630 mm Verfahrweg Y / Y-Travel 765 mm Verfahrweg Z / Z-Travel 510 mm Schwenkbereich A-Achse / swivel range A-axis -120 - +30 ° Drehbereich C-Achse / rotary range C-axis 360 ° Tischgröße / table size 500x500 mm Werkzeugschaft / spindle taper SK40 Drehzahl / spindle speed 35-12000 UpM /rpm Eilgang / rapid feed 50 m/min Anzahl der Werkzeugplätze / tool places in ATC 80 fach / fold Antriebsleistung Hauptantrieb / drive capacity main drive 26 kW Gewicht der Maschine ca. / weight 17000 Kg Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich - Technical data, accessories and description of the machine are not binding.

Condition: as good as new (ex-display), Year of construction: 2024, Special-purpose machine for plastics shredding Base machine from €24,990 net Ideally suited for shredding: - Paper, cardboard, pipes, profiles, boxes, canisters, buckets, cans, wooden pallet offcuts, etc. Bcjdpsd H R Sxsfx Af Eju - Medium-hard thermoplastics such as PVC, PP, PE, PS, PU, PET Included: - Special rotor with embedded knives (reduced load uptake) - Minimal cutting gap between rotor and counter knives Motor: 18.5 kW; 400 V - 50 Hz - 3 ph Control: PLC Cutting chamber opening at the top: 600 x 800 mm Maximum recommended input material size: approx. 500 x 500 mm (*height less critical) Hydraulically actuated pusher Screen perforation options: 25 - 40 mm For plastics, coarser screens are recommended (30-40 mm) *For finer granulation, a two-stage shredding process with downstream granulator type MVZ (screens 5-15 mm) is recommended Exhaust port Ø 160 mm Weight: approx. 1,300 kg Dimensions (LxWxH): approx. 1737 x 1167 x 1650 mm Additional options available at extra charge: - Raise shredder by approx. 25 cm (preparation for conveyor discharge): + €1,980 net - Inclined conveyor belt (discharge height approx. 220 cm): + €8,770 net - Overbelt magnet: + €5,980 net - Conveyor and overbelt magnet control: + €2,750 net (synchronized start/stop with shredder) - Alternatively, manual start/stop function at conveyor: + €595 net Raw material requirements: - Moisture content (atro) must be below 25% - Metals and mineral contaminants such as sand, stones, etc. will result in increased wear We are happy to offer a free test using your material at our facility in Neckartailfingen. Alternatively, you may send your material to us via freight forwarder and we will document the test using photos and videos. --- * Only for brittle plastics of medium hardness. * Not suitable for elastic or extremely hard and heavy plastics – this will negatively impact the durability of the system. --- Optional: Larger machine sizes available Base machine: Shredder MGZ 830 K-S – 18.5 kW Cutting chamber opening at the top: 800 x 1,000 mm Maximum recommended input material size: approx. 720 x 700 mm (*height less critical) From €39,995 net (*options subject to additional cost) Base machine: Shredder MGZ 1030 K-S – 22 kW Cutting chamber opening at the top: 1,000 x 1,000 mm Maximum recommended input material size: approx. 900 x 700 mm (*height less critical) From €49,975 net (*options subject to additional cost) Base machine: Shredder MGZ 1330 K-S – 37 kW Cutting chamber opening at the top: 1,300 x 1,200 mm Maximum recommended input material size: approx. 1,200 x 700 mm (*height less critical) From €79,975 net (*options subject to additional cost)

Condition: as good as new (ex-display), Year of construction: 2025, Demonstration machine with approx. 9 operating hours Another unit available immediately (ex works Neckartailfingen) *Options at additional cost – see below Included: + Profile rotor for increased throughput performance We are happy to arrange a free test with your material. You are welcome to visit us in Neckartailfingen for this purpose. Alternatively, you may send your material to us via freight forwarder and we will document the test with photos and videos. Motor: 18.5 kW; 400 V - 50 Hz - 3 ph Knives: 15 pieces, reversible multiple times Optional double knife row + €995 net Rotor diameter: 260 mm Control: Siemens S7-1200 PLC Cutting unit opening: 630 x 820 mm Hopper volume: approx. 0.6 m³ Hydraulically operated pusher Screen perforation as desired (10 - 40 mm) Extraction port Ø 160 mm Weight: approx. 1,300 kg Dimensions (LxWxH): approx. 1737 x 1167 x 1650 mm Moisture content: < 30% dry basis. Standard features included: - V-rotor for maximum throughput - Control cabinet with Siemens PLC Bsdpfxsb Ny Eyj Af Escu - Automatic star/delta start - Rapid hydraulics - Automatic stop when rotor is idle - Speed 70-90 rpm for high throughput - Cyclic control to avoid idle times - Performance-boosting incremental control of the hydraulic pusher - Pertinax guides for the hydraulic pusher - Vibration-damping machine feet - CE compliant Optional extras for the shredder (at additional cost): - Raise shredder by 30 cm (preparation for conveyor belt) + €2,080 net - Eco-rings: + €1,980 net (recommended for over 20% hardwood) - Double knife row + €995 net - Special scraper + €990 net (recommended for shredding veneer, paper or thin materials < 3 mm) - Angled conveyor belt + €8,770 net (angle adjustable 0–60°, discharge height approx. 2,000 mm) - Automatic overbelt magnet + €5,980 net Alternatively, fixed magnetic block above the belt for manual cleaning + €990 net (for low metal contamination) - Control for conveyor and overbelt magnet + €2,750 net (start/stop synchronised with shredder); alternatively, manual start/stop for conveyors + €595 net Raw material requirements: - Moisture content (dry basis) must be below 30% - Installation temperature: temperature controlled room, at least +5°C - Metals and mineral contaminants such as sand, stones, etc., will increase wear

Condition: good (used), Year of construction: 1975, max. wheel diameter 630 mm y-travel 560 mm gear width 180 mm max. module 8 min. module 1 workpiece dia. 750 mm table diameter 450 mm draw-in arbor diameter 58 mm spindle stroke 200 mm adjustment range 230 mm distance between table/spindle 225-450 mm taper Morse 4 Bedpfxoyb Sx To Af Ejcu down feeds 0,03 mm/Hub roll feed 10n: 0,18-0,74 mm/Hub no. of strokes 12n: 47-300 Hub/min electrics - voltage/frequency 380/50 V/Hz weight of the machine ca. 5500 kg The machine was raised by 100 mm.

Year of construction: 2005, condition: ready for operation (used), This SUMITOMO SHI DEMAG El-Exis S 250/630-1450 was manufactured in 2005. It features a central accumulator for high-speed injection and chromed tie bars. The pump drive power is 22.0 kW, with a mains voltage of 400 V/50 Hz. It includes a color data display with VGA interface, an oil cooler, and electric screw drive. Consider the opportunity to buy this SUMITOMO SHI DEMAG El-Exis S 250/630-1450 hydraulic injection moulding machine. Contact us for more information. • 5x similar units available • Central accumulator for high-speed injection; core, ejector, and nozzle movement • Nozzle movement parallel to mold movement • Chromed tie bars on clamping unit • Pump drive power: 22.0 kW • Mains voltage: 400 V / 50 Hz, 3 Ph + N + PE • Separate mains connections for drive and heating • Control: color data display with VGA interface and AT keyboard interface • Injection, holding pressure, and back pressure via servo valve • Reinforced oil cooler • Separate water connections for mold and oil cooling • Compliance: Basic version Europe, according to valid safety regulations • Painting: Bottom anthracite grey RAL 7016; Top blue 571C MD • Elastic machine mounting • Ultrasonic displacement measuring system with digital data transmission for injection, ejector, mold (WZ), and nozzle (AWH) movements; 1/100 mm resolution for injection axis • Reduced centering diameter (D=100/125) for fixed mold platen • Mold connection dimensions type E (similar to EUROMAP), without side ejector plate • Standard mold installation height • Safety interlock: mold opening and ejector forward only with closed safety door • Ejector with position control via proportional valve; pressure and velocity independently programmable • Electric screw drive, frequency-controlled Bsdpfx Asx D Rqrsf Escu

Condition: ready for operation (used), Year of construction: 2012, clamping force: 2,500 kN, screw diameter: 50 mm, injection weight: 482 g, total height: 2,400 mm, overall weight: 14,900 kg, This SUMITOMO SHI DEMAG El-Exis S250/630-1600 was manufactured in 2012. It features a clamping force of 2500 kN, a screw diameter of 50 mm, and a shot weight maximum of 482 g. The machine has a dry cycle time of 1.2 seconds and a total installed power of 57.9 kW. If you are looking to get high-quality injection moulding capabilities, consider the SUMITOMO SHI DEMAG El-Exis S250/630-1600 machine we have for sale. Contact us for more information. • Clamping unit size: 250 • Holding force: 2750 kN • Platen size (H x V): 930 x 930 mm • Distance between tie bars (H x V): 630 x 630 mm • Ejector retraction force: 40 kN • Injection unit (size 1600) Bcjdpfex D Nwqjx Af Eeu • Screw geometry: Standard • L/D ratio: 25 • Injection rate (PS, without accumulator): 530 cm3/s • Metering stroke: 270 mm • Nozzle stroke (max): 110 mm • Material hopper capacity: 110 L • Electric metering drive: 13.1 kW • Cylinder heating: 14.8 kW • Dry cycle time (EUROMAP 6): 1.2 s • Dry cycle stroke (EUROMAP 6): 441 mm • Dimensions • Max drive overhang with nozzle contact: 184 mm • Max drive overhang with nozzle retraction: 1279 mm • The maximum injection weight in polypropylene is 482 g with a screw diameter of 50 mm Dimensions Machine Depth 6600 mm

Condition: ready for operation (used), Year of construction: 2017, number of axes: 3, This 3-axis GEHRING 630-1 LR vertical honing machine was manufactured in 2017. It features a HAINBUCH sleeve with a diameter of 65 mm, VDI40 tool holders, and a hydraulic holder for reduction bushing. Ideal for precision honing applications. Contact us for more information about this machine. Additional equipment • HAINBUCH hexagonal collet sleeve, Ø65 mm — qty 1 • HAINBUCH alignment screwdriver — qty 3 • HAINBUCH drawbar adapter — qty 1 • Cable (unspecified) — qty 2 • Unclamping tool (unspecified) — qty 1 • Internal coolant pickup — qty 1 • VDI40 hydraulic toolholders, Ø20 (ISCAR) — qty 8 • MAPAL holder D12, Ø13, part no. — qty 4 • Reducer bushing for hydraulic holder, 20→13 mm — qty 6 • MAPAL HM reamer plate “Axel 92-R-0N” — qty 30 • MAPAL D12 holder/bracket Ø14 (unspecified model) — qty 1 • Hydraulic holder for reduction bushing ISCAR 20→14 — qty 3 • Chisel/tool holder DIN 69880 – E2 – 40×40 — qty 1 Bsdpsyap Uisfx Af Eecu • MAPAL D12 holder/bracket Ø14 (unspecified model) — qty 4

Condition: like new (used), Year of construction: 2012, power: 18.5 kW (25.15 HP), Rotor 260 mm Feed opening approx. 630 x 830 mm Rotor length approx. 630 mm Motor: 18.5 kW Number of knives: 30 Bodpfeyfw D Nsx Af Ejcu Screen present Overhaul: - new motor incl. installation - new slide guide rails - calibration of the slider - new knives - new counter knives - completely new rotor - hydraulics checked / wear parts replaced - new flange bearing UCF 214 - new paintwork - adjustment / test run

Condition: ready for operation (used), Year of construction: 2009, travel distance X-axis: 630 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 560 mm, controller manufacturer: MAZATROL, controller model: MATRIX, table width: 500 mm, table length: 500 mm, table load: 500 kg, overall weight: 25,000 kg, spindle speed (max.): 12,000 rpm, spindle motor power: 26,000 W, This 5-axis Mazak Variaxis 630-5X T was manufactured in 2009, offering advanced capabilities for complex machining tasks. Ideal for precision engineering, this vertical machining center ensures reliable performance. Consider the opportunity to buy this Mazak Variaxis 630-5X T vertical machining center. Contact us for more information. Machine Benefits Technical Machine Benefits • Number of tools (atc magazine): 80 • High pressure through the spindle: 20 bar Extra Information Bcedjyallkepfx Af Esu Machine still under power Technical Specification Taper Size ISO 40

Year of construction: 2003, condition: ready for operation (used), screw diameter: 45 mm, This Arburg Allrounder 630S 2500-675 was manufactured in 2003. It is a hydraulic injection moulding machine featuring a screw diameter of 45mm. Consider the opportunity to buy this Arburg Allrounder 630S 2500-675 hydraulic injection moulding machine. Contact us for more information. Bjdpfx Aoyaizisf Escu

Condition: used, Year of construction: 1996, Price: On request Double-sided planer REX HOMS 630 Serial No. 16831 380V, 102.6Amp 67.5HP Bcsdpfx Afjwng Ike Eju Equipped with 3 planing shafts 1st under 15kW 2nd under 11kW 3rd above 18.5kW Max planing width 630mm Min-max planing height 10-310mm Max chip removal upper planing shaft 15mm Max chip removal lower planing shaft 10mm - Year: 1996 - Documentation available: No - CE certificate present: No Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Year of construction: 2000, Empty weight: 22.000 kg Price: On request Working width: 1500mm Working length: 2160mm Max. thickness: 2mm With Supply-station infeed. - Year: 2000 - Documentation available: Yes - CE marking present: Yes - CE certificate present: No - Serial number: 12/50 - Drive system: CNC - Power [kW]: 18.0 - Max. sheet thickness [mm]: 2 Bcedjww Eqcjpfx Af Eou - Max. working width [mm]: 1500 - Options: Loading system - Transport weight [kg]: 22000kg Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: ready for operation (used), Year of construction: 2009, functionality: fully functional, Automatic jogger with air discharge roller and pneumatic folding stops After the jogging process is completed, air is pressed out of the cutting layer. You can jog once or twice, with the pressing pressure of the first jogging operation being adjustable; when the table is tilted, intermediate jogging is also possible. – Stainless steel-plated table surface 72 x 87 cm – Minimum layer height: 30 mm – Maximum layer height: 165 mm Bjdpfx Afew Nlaae Eocu – Table height: 860 – 950 mm – Compressed air requirement at 6 – 8 bar: approx. 2 l/min

Condition: good (used), Year of construction: 2007, Ref. -No.: 10357 Manufacturer: STARRAG HECKERT Type: HEC 630 Athletic Year of construction: 2007 Type of control: CNC Steuerung Control: Sinumerik 840D Storage location: Halberstadt Bjdpoycpwiefx Af Eocu Country of origin: Schweiz X-Travel: 1200 mm Y-Travel: 950 mm Z-Travel: 1200 mm Work spindle drive power (25% ED): 67 kW Work spindle torque (25% ED): 1508 Nm Tool Taper: HSK-A100 Workpiece interference circle diameter: 1250 mm Tool Piece Magazine With: 80 Pcs./pcs. Tool changer: Werkzeugkettenmagazin Max. Workpiece height: 1200 mm Feed Speeds X/Y/Z Axis: 60000 mm / min Feed Capacities X/Y/Z: 22/18/22 N Speed range - main spindle: 20 - 6000 RPM Numbers Of Pallets: 2 Max pallet load: 1500 kg Size Of Pallet: 800 x 630 mm pallet change time: 14 s Pallet clamping area (lxw): 800 x 630 mm Weight Of The Machine Ca.: 25 t

Condition: used, This listing is for 1 of 3 Watson Marlow 630S Peristaltic Pumps These units are in full working condition and ready for immediate use A peristaltic pump moves fluid through a flexible tube by sequentially compressing the tube (like a wave) which pushes the fluid forward. Because only the inner surface of the tube contacts the fluid, the pump mechanism is isolated from the fluid — this is useful for: Handling corrosive, abrasive or sterile fluids Bcsdpsxhdtbsfx Af Eju Avoiding contamination (the pump body doesn’t contact the fluid) Easy maintenance (replace the tubing rather than the pump’s internal components) Watson‑Marlow is a well-known maker of such pumps in lab, process, pharmaceutical, chemical, water treatment, and industrial settings. Typical applications / use cases Because of the flexibility, purity, and control of peristaltic pumps, the 630S is used in: Chemical dosing / metering (acid, base, reagents) Pharmaceutical / biotech processes Water / wastewater treatment Food & beverage (for sterile or food-contact fluids) Laboratory and pilot-scale processing

Condition: good (used), Year of construction: 2018, CNC press brake Manufacturer: SMD Yawei Model: PBB-630/6200 Year of manufacture: 2018 CNC control: CYBELEC ModEva 15 Press force: 6,300 kN Working width approx. 6,200 mm DSP-Laser-TX Connected load: 400 V / 95 kVA Bcodpfx Asrivu Sef Eju

Condition: excellent (used), Planer-thicknesser combination 630 with foldable tables. Sturdy cast iron machine from the liquidation of a Swiss company. Bcjdpfxoycw Ico Af Eeu

Condition: good (used), functionality: fully functional, conveyor belt width: 615 mm, input voltage: 400 V, input frequency: 50 Hz, DGUV certified until: 01/2027, electrical fuse: 16 A, opening width: 30 mm, working width: 615 mm, space requirement length: 1,205 mm, space requirement width: 2,800 mm, type of input current: three-phase, Fritsch Rollfix 3W 630 Dough Sheeter Bcodoyak S Aopfx Af Eeu For all dough types – sheeting and laminating With pressure board for long rolling Manual control Dough sheeting machine With hand and foot control Mobile design Connection: 400V 16A CEE plug Dimensions approx. 2800 x 1205 mm (W x D) Used machine Options: Maintenance contract Service package Spare parts box Delivery service Commissioning & training Visit our wide range of dough sheeters!

Condition: used, functionality: fully functional, Hydraulic guillotine shear Brand: Ajial Model: CB-630 Type: Swing beam shear Bjdjydvamjpfx Af Eocu Cutting length: 3,050 mm Maximum cutting thickness: 6 mm Cutting angle: 2º Motor power: 15 HP Back gauge: 800 mm Throat depth: 400 mm

Condition: good (used), Urschel RA dicer RA dicer is a centrifugal type dicer, with its capability to cut product into clean cut, uniform pieces in the small to intermediate size range, fruits / vegs / certain cheese and nuts. With two spare boxes of knives, blades, belts cutting heads and more, mobile, 3Ph Bcodpfxerq Iuko Af Esu

Condition: ready for operation (used), Year of construction: 2008, travel distance X-axis: 700 mm, travel distance Y-axis: 820 mm, travel distance Z-axis: 550 mm, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, We are offering this ready-to-use Mas Kovosvit MCU 630 in Germany, marketed as a vertical machining center, year of manufacture 2008. In Germany, this 5-axis milling machine was sold under the name Wemas VZU 630 SA. Manufacturer: Mas Kovosvit MZU / 630 Wemas Model: MZU 630 / VZU 630/SR Year of manufacture: 2008 Condition: ready for use Category ID: 1451 Type ID: 4156 Machine type: vertical machining center Price is ex-works, excluding packaging. The price is net plus statutory VAT, ex location, excluding transport insurance and packaging, and is offered without any warranty. Bcedpfxoycwl Io Af Esu Terms of payment: strictly net, payable prior to loading. We reserve the right to correct any errors in the technical data. The machine should be inspected in advance. The scope of accessories is limited exclusively to what is described in the article description. There is explicitly no claim to any accessories shown for illustration purposes, unless expressly stated. If you have any questions or require further information, please feel free to send us a message or give us a call.

Condition: used, feed pressure / bar liter capacity / l Air consumption / m³/h For sale is a powerful ALUP Solo 18 screw compressor with 18.5 kW motor power, ideal for industrial use. The compressor is offered including a high-quality DRYPOINT RA refrigeration dryer from Kaeser - for reliable and efficient compressed air drying without moisture problems. The ALUP Solo 18 is a compact, oil-injected screw compressor, which is suitable for medium to large operations. It is characterised by its energy efficiency, low noise levels and high reliability Technical specifications Motor power: 18.5 kW Max. Operating pressure: 13 bar Delivery rate: up to 200 m³/h Bcodpfx Afswz Ry Ds Eou Low-noise and energy-efficient Including DRYPOINT RA refrigerant dryer for dry, clean compressed air Including compressed air tank for pressure stabilisation and condensate management Perfectly suited for demanding industrial applications Technical data taken from publicly available sources

Condition: good (used), Year of construction: 1998, - automatic paper jogging system Pile height: 165 mm - tilt angle of the air-cushion table and jog vibration infinitely adjustable - air-removal roller (squeeze-out pressure and speed variable) Bcjdpfx Afoyfgy Tj Eou - automatic folding side-stops (pneumatic) with air cushion