Used Quick Lathe for sale (9,715)

Condition: used, Year of construction: 1977, faceplate diameter 2500 mm swing diameter 2700 mm turning height 2000 mm cross rail - adjustment 1500 mm workpiece weight max. 20.000 kg total power requirement 71 kW Control Siemens Sinumerik 840 Single-column vertical lathe 2000 x 2000mm Retrofit: 1997 Gr. turning diameter: 2700mm Gr. distance f. face plate to bottom of toolholder: 2150mm chisel holder: 2150mm Support swivelling up to 30° Chisel cross-section: 240x240mm small plunging diameter: 300mm Kodpfx Aouddpgjg Uodg Special equipment: Re-moulding, taper turning, thread cutting, constant cutting speed

Condition: used, turning diameter over bed 2400 mm turning diameter over slide rest 2200 mm turning length 10000 mm power capacity 185 kW faceplate diameter 1650 mm turning speeds 1,5 -150 U/min max. workpiece weight 70000 kg clamping diameter 1400 mm Technical data Working range Maximum turning diameter over support: 2200 mm Maximum swing diameter over bed: 2400 mm Maximum turning length: 10,000 mm Clamping diameter in the headstock faceplate: 300 - 1,600 mm with special jaws up to 2,050 mm Clamping diameter in the tailstock faceplate: 300 - 1,400 mm Maximum workpiece weight: 70000 kg Main drive, faceplate Faceplate diameter: 2000 mm Faceplate speeds, continuously adjustable in 4 stages: 1.5 - 150 rpm Maximum torque at rated speed: 220,000 Nm Drive power of main motor: 185 kW Kdodjxddvnspfx Ag Uog Flange centre point angle: 70° Supports Travel of the plunge slide: 500 mm Travel of the face slide: 1400 mm Quick adjustment, longitudinal: 2000 mm/min Quick adjustment, face: 800 mm/min Infinitely variable feed, longitudinal: 0.6 - 300 mm/min Infinitely variable feed, face: 0.3 - 120 mm/min Max. cutting force at support: 20,000 kg Tailstock Faceplate diameter (removable): 1650 mm Faceplate clamping diameter: 1400 mm Flange centre point angle: 70° Quick adjustment: 1250 mm/min Special equipment Copying device for first support Copying length 8500 mm Max. copying depth in one pass 500 mm Boring device: Boring bar 460 x 390 mm Drilling diameter 600 - 1000 mm Maximum drilling depth in one pass 2700 mm At Ks of 200 kp/mm² - s max. = 1.5 mm/rev a = max. chip cross-section 30 mm² at a projection of 1000 mm Reduced chip cross-section with increasing drilling depth A guide ruler for cone turning, adjustment angle up to 8° and a maximum cone length (in one pass) of 2000 mm, adjustment accuracy ± 5 minutes. A guide ruler for cone turning, adjustment angle up to 15° and a maximum cone length (in one pass) of 1000 mm, adjustment accuracy ± 5 minutes. 125 kg auxiliary crane on spindle box.

Condition: used, turning diameter 320 mm turning length 800 mm swing diameter over bed slide 180 mm turning speeds 20 - 3200 U/min spindle bore 36 mm quill travel 160 mm quill: MK 3 machine weight ab. 1200 kg range L-W-H 2000 x 950 x 1600 mm Equipment: - 3-jaw chuck FORKARDT Ã?160 mm Kdjdox Tu I Aepfx Ag Ueg - MULTI-FIX quick-change holder with inserts - Coolant device - Lathe chuck guard - Change wheels - Chip back panel - Machine light

Condition: used, Year of construction: 1999, control Heidenhain Kdedpfx Agjw Syd Sj Uog centre distance 1400 mm weight of the machine ca. 3,6 t Handwheel defective

Condition: good (used), Year of construction: 2013, Centre height: 330 mm Centre distance: 2000 mm Spindle bore diameter: 103 mm Max. turning diameter over bed: 660 mm Max. turning diameter over carriage: 420 mm Spindle speed range: 36 – 1600 rpm (12 steps) Spindle nose: ISO 702/II No. 8 Longitudinal feed range: 0.063 – 2.52 mm/rev (65 steps) Cross feed range: 0.027 – 1.07 mm/rev (65 steps) Metric threads: 1 – 14 mm (22 steps) Inch threads: 28 – 2 TPI (25 steps) Module threads: 0.5 – 7 mm (18 steps) Diametral pitch: 56 – 4 DP (24 steps) Kdedpfxex Ux D Do Ag Ujg Motor power: 7.5 kW Weight: 3200 kg Dimensions: 3635 x 1050 x 1450 mm

Condition: good (used), Year of construction: 2007, Manufacturer: Volz BMT Year of manufacture: 2007 Control: conventional with digital readout (DRO) Kdjdpfx Aex Uw S Heg Usg Country of origin: Taiwan Swing diameter: 660 mm Max. turning length: 2000 mm Spindle bore: 85 mm Spindle mount: D1-8 Spindle motor: 7.5 kW Spindle speed: 17–1200 rpm with steady rest with digital readout (DRO) with thread cutting function

Condition: like new (used), Year of construction: 2006, spindle motor power: 15 W, travel distance X-axis: 177 mm, travel distance Y-axis: 41 mm, travel distance Z-axis: 550 mm, rotational speed (min.): 5,000 rpm, total height: 2,065 mm, total length: 4,390 mm, total width: 1,741 mm, overall weight: 5,000 kg, CNC controller: Nakamura-Tome FANUC Capacity X-axis travel mm: 177,5 Y-axis travel mm: ± 41 Z-axis travel mm: 550 B-axis travel mm: 689 C-axis: 360º (0,001º) Turning length mm: 500 Max. turning diameter mm: ø: 190 Distance between spindle centers mm: 780 Bar work capacity mm: 51 Upper turret Tool holder: VDI-30 Number of tool slots St .: 12 Speed driven tools RPM: 3.600 Drive power driven tools kW: 5.5 / 3.7 Main spindle Speed spindle rpm: 5.000 Drive power spindle kW: 15 / 11 Maximun torque Nm: 47,2 Counter spindle Speed spindle rpm: 5.000 Kedpfx Agjx Dbxgo Uodg Drive power spindle kW: 11 Equipment Chip conveyor Part catcher Bar Loader RBK 10016 Milling function Working time hours Potencial nominal kVA: 31,43 Basic machine dimensions / weight Length mm: 4.390 Width mm: 1.741 Height mm: 2.065 Weight kg: 5.000

Condition: used, Year of construction: 1970, total height: 1,400 mm, total length: 3,650 mm, total width: 1,300 mm, Empty weight: 2.200 kg - Year: 1970 - Documentation available: No - CE certificate present: No - Drive system: Conventional - Power [kW]: 9.0 - Centre height [mm]: 330 - Swing over bed [mm]: 660 - Distance between centres [mm]: 2000 - Spindle bore [mm]: 88 - Min. spindle speed [rpm]: 5.6 Kjdpfewxwd Rsx Ag Usdg - Max. spindle speed [rpm]: 3200 - Transport dimensions: 3650mm x 1300mm x 1400mm (l x w x h) - Transport weight [kg]: 2200kg Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: new, Year of construction: 2025, 0554 mm 370 mm 2000 mm Kdodpex Urtrefx Ag Uog 280 mm 104 mm 11 kW

Condition: good (used), Year of construction: 1991, Centre height: 285 mm Centre distance: 1250 mm Swing diameter over bed: 570 mm Swing diameter over cross slide: 365 mm Spindle bore: 62 mm Bed width: 360 mm Speed range, 24 steps: 11.2 – 2240 rpm Feed rates 60 longitudinal feeds: 0.06 – 56 mm/rev 60 transverse feeds: 0.03 – 28 mm/rev Thread cutting 60 thread pitches, metric: 0.5 – 448 mm 60 thread numbers, imperial: 56 – 0.0625 TPI Quill stroke: 190 mm Quill diameter: 80 mm Tailstock taper: MT 5 Drive power: 15 kW Dimensions (L x W x H): 3500 x 1440 x 1380 mm Weight: approx. 2,600 kg Accessories / Special Features: • 3-jaw wedge bar chuck SCHUNK 315 with jaw safety lock • Feed and rapid traverse via cross switch and push button • Quick-change toolpost system "Multifix" size C • Coolant system • Safety guard for chuck (electrically interlocked) • Work area lighting Option: - 3-axis digital readout, manufacturer K+C - Additional accessories (e.g. faceplate, live centre, tools, etc.) on request Siegfried Volz Werkzeugmaschinen Kdjdjx Upp Ropfx Ag Uog Rüschebrinkstr. 151 - 153 DE - 44143 Dortmund - Wambel

Condition: excellent (used), Year of construction: 2007, turning length: 1,545 mm, turning diameter over cross slide: 660 mm, spindle bore: 65 mm, travel distance X-axis: 580 mm, travel distance Y-axis: 160 mm, travel distance Z-axis: 1,545 mm, Make: MAZAK Type: INTEGREX 200-4 ST Control: MAZATROL MATRIX Year: 2007 Multi-Tasking Machining in a Single Machine Setup Sub spindle for overtaking with full C-Axis The INTEGREX IV series can finish all machining processes. High speed, advanced milling spindle that can tilt up to 240 degrees swiveling. Lower turret with rotary tool spindle so livew tooling Chip conveyor with coolant and 15 Bar iKZ Double chuck KNCS-N 210-53 SMW Autoblock MAZAK Flex -GL150F Gantry Loader Gripping range 200 x 120 length x 15 Kg Max. turning Ø: 660mm X-Axis: 580mm Y-Axis: 160mm Z-Axis: 1545mm B Axis: 270° Spindle bore: 65mm Speedrange: 5000Rpm Spindle power: 22kW Subspindle speeds:5000Rpm Subspindle bore: 65mm Subspindle power: 18.5kW Kodjx S Hm Ijpfx Ag Usdg ATC / revolver: 40 B-Axis Toolsystem:Capto C6 B-Axis Speedranges:12000Rpm Length: 5200mm Width: 2550mm Height: 2600mm Weight: 14000kg

Condition: good (used), Quick-change tool holder size D with base Kdedow Ec Eyspfx Ag Ueg Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel

Condition: excellent (used), Year of construction: 2009, CNC controller: M720BM Capacity X-axis travel mm: 260 Y-axis travel mm: ±50 (100) Z-axis travel mm: 795 Turning length mm: 705 Max. turning diameter mm: ø 356 Swing over bed mm: ø 923,8 Swing over cross-slide mm: 755 Bar work capacity mm: 80 C-axis degree: 0,001° Upper turret Number of tool slots St .: 12 Speed ​​driven tools RPM: 6.000 Drive power driven tools kW: 5,5/3,7 (3 min/cont) Indexing time s: 0,25 Main spindle Speed ​​spindle rpm: 4.000 Drive power spindle kW: 18,5/15 (25% ED/cont) Spindle bore mm: ø91 Tailstock Tailstock travel mm: 734 Holder: MT5 Kdedpfx Agjxcqz Is Ujg Equipment Chip conveyor Tool measuring arm

Condition: used, Year of construction: 2006, turning diameter 320 mm turning length 322 mm control Fanuc D -iT greates pass round over bed 510 mm x-axis 175 mm z-axis 330 mm spindle tunring speed 6.000 U/min spindle drive 15 kW number of tool places 12 Pos. Kodpfx Agsya Ih Is Ujdg auto power on hours ca. 43.947 In our assessment, the machine is in good used condition and can be inspected under power by appointment. Technical features & accessories: - Chip conveyor - Manual tailstock - Tool setter arm - Parts catcher with collection box Accessories, tools, and clamping devices shown are only included if specifically stated in the additional information. Technical data and specifications are subject to change without notice. Prior sale is reserved.

Condition: good (used), Year of construction: 1988, turning diameter over cross slide: 900 mm, spindle bore: 105 mm, turning diameter: 1,200 mm, turning length: 5,000 mm, total length: 8,000 mm, total width: 1,800 mm, total height: 1,550 mm, bed width: 650 mm, workpiece weight (max.): 10,500 kg, Motorized tailstock CE-Chuck cover protection Telescopic guide cover over guideways Steady rest  4 chuck 1000 mm diameter 3 chuck 500   mm diameter   2 Axis digital read out system DBC Turning Length: 5000mm Swing over bed Ø: 1150mm Swing over cross slide Ø:850mm Spindle bore: 105mm Bed width: 650mm Tailstock spindle Ø: 140Ø Stroke pinole: 300mm Spindle taper: 6Mk Speeds / ranges: 4,5 - 900Rpm Workpiece load: 8000 Length: 8000mm Kdsdpfx Agewrxpbs Uog Width: 1800mm Height: 1550mm Weight: 13800kg

Condition: good (used), Year of construction: 2008, turning length: 2,000 mm, feed rate X-axis: 3,000 m/min, feed rate Z-axis: 3,000 m/min, HeidenHain ND780 3 Axis dro Variomatic RPM speedrange  Steady rest Multi fix Tool system DBC Turning Length: 2000mm Swing over bed Ø: 830mm Swing over cross slide Ø:420mm Swing in the gap Ø: 1000mm Gap length: 295mm Spindle bore: 110mm Bed width: 560mm Tailstock spindle Ø: 105Ø Stroke pinole: 225mm Spindle taper: 6Mk Power: 15kW Kdsdpfexf Ey Rjx Ag Ueg Speeds / ranges: 2000Rpm Feed rate X-Axis: 3000mm/min. Feed rate Z-Axis: 3000mm/min. Workpiece load: 2400 Length: 3700mm Width: 1900mm Height: 1900mm Weight: 5500kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: good (used), Year of construction: 2004, CNC lathe IRLE - IWDS 1000 CNC MACH-ID 7758 Make: IRLE Type: IWDS 1000 CNC Control: SIEMENS 840D Year: 2004 Double carriage with 4 position revolver and 840D Siemens Steady rest 200 - 1090 mm Roller rest 860 - 1090 mm 4 chuck 1350 mm Clamping from 200 - 1100 mm Bed width 2000 mm Stoke X Axis 950 mm Stroke Z Axis 14900 mm Specifications Metric US Standard Swing over bed Ø 1400 mm Kdedpfx Agspdp N Ie Ueg Swing over cross slide Ø 1100 mm DBC Turning Length 13000 mm Spindle power 129 kW Workpiece weight 20000 Speeds / ranges 1 - 300 Rpm Feed rate X-Axis 4500 mm/min. Feed rate Z-Axis 4500 mm/min. Dimensions (Estimate) Length 20000 mm Width 3380 mm Height 2200 mm Weight 100000 kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: used, Year of construction: 2012, Technical details: turning diameter: 1800 mm turning length: 6000 mm control: 840 circulation diameter via slide valve: 1140 mm Kdsdpfoyapp Hox Ag Usg Shift of the planing slide: 680 mm bed width: 1350 mm spindle head: DIN 55027 Gr. 15 spindle diameter in front bearing: 240 mm spindle bore: 110 mm speeds:: 3,55-710 1/min diameter of quill: 220 mm quill stroke: 350 mm Maximum torque at the spindle: ca. 21000 Nm feed power Z: 35000 N Feed force X: 25000 N Rapid traverse X: 4 m/min Rapid traverse Z: 4 m/min total power requirement: 55/70 kW dimensions of the machine ca.: ohne Verkleidung 13000x4200x2400 mm weight of the machine ca.: 34000 t

Condition: new, Center length ----- 1000 mm Center height ----- 160 mm Turning diameter ----- 320 mm Passage of main spindle ----- 38 mm Bed width ----- 180 mm Spindle speed ----- 65-1810 rpm Motor ----- 1.5 KW Weight ----- 560 kg INCLUDING * 3-axis digital readout brand SINO * Quick-change chisel holder type Multifix TOOE5 with 4 scoops * 3 chuck 160 mm * 4 chuck 200 mm Ksdpfx Ajrpn Uisg Uodg * chuck 250 mm * LED work light and cooling system * Fixed and moving guards * Foot brake (CE) * Electric brake (CE)

Condition: good (used), Year of construction: 1988, 1 used lead and feed screw lathe Make: Weiler Model: 160 B Year of manufacture: 1988 Technical specifications Centre distance: 650 mm Swing over bed: 320 mm Swing over cross slide: 192 mm Centre height: 160 mm Spindle bore: 40 mm Rated power: 2.4 / 3 kW Spindle speeds: 48 – 2500 rpm Dimensions: approx. L 2.20 x W 1.10 x H 1.40 m Weight: approx. 1 t Equipment Kodpfow Sdr Hex Ag Uedg Heidenhain digital readout Multifix toolholder with various inserts 3-jaw chuck Emergency stop

Condition: used, MOSTANA STANKO 1M65-5 HEAVY DUTY CENTRE LATHE MAKE MOSTANA STANKO, MADE IN USSR MODEL 1M65-5 YEAR MID 80s SWING OVER BED 1000.0 mm SWING OVER SADDLE 650.0 mm CHUCK SIZE 1000.0 mm SPINDLE BORE 135.0 mm SPINDLE SPEEDS 5- 500 RPM SPINDLE POWER 22 Kw PLUS POWER FEED TO THE SADDLE Kjdpox Dmi Djfx Ag Usdg METRIS AND ENGLISH SCREW CUTTING 1000.0MM 4 JAW CHUCK 2 AXIS DIGITAL READOUT CLEAN BED WORKED ON COMPOSITE, NO METAL

Condition: excellent (used), Year of construction: 2021, turning diameter over cross slide: 840 mm, turning length: 6,000 mm, spindle bore: 105 mm, rapid traverse X-axis: 5,000 m/min, rapid traverse Y-axis: 7,000 m/min, 3 chuck SCHUNK ROTA-S Plus 500-102 3 x Steady rest fixed Revolver VDI Duplomatic Siemens 840 DSL This type of lathe is commonly used in industries like: Oil & gas (pipe threading, tool joints) Steel industry (roll turning)  Power generation (turbine shaft turning)  Heavy machinery manufacturing DBC Turning Length: 6000mm Swing over bed Ø: 840mm Swing over cross slide Ø:570mm Spindle bore: 105mm Spindle power: 33kW Bed width: 450mm Tailstock spindle Ø: 220Ø Spindle taper: 5Mk Speeds / ranges: 1200Rpm Feed rate X-Axis: 5000mm/min. Feed rate Z-Axis: 7000mm/min. Workpiece load: 2500 Kedpfx Aex Sqaxsg Uedg Length: 9500mm Width: 2300mm Height: 2300mm Weight: 8600kg

Condition: good (used), Year of construction: 2014, 780mm Swing, 630mm Swing over the Cross-Slide, 481mm Max Cutting Diameter, 790mm max cutting length, 12 Station Turret, Kdedpfxjx Eluws Ag Usg 76mm bar capacity, 3500rpm, 22kW Spindle, Fanuc Oi, Tool setter, 10” 3 jaw chuck, Low Volt Light, Tailstock, Swarf Conveyor, Coolant.

Condition: good (used), Year of construction: 2016, 300mm turning diameter, 510mm turning length, Y axis +/- 52.5mm, 600mm swing, 65mm bar capacity, spindle speed 4,500rpm , 16 station turret, 15kW spindle motor, milling 6000rpm, C axis 0.001 degrees, sub-spindle speed 6,000rpm, Kdedpfox Elr Asx Ag Ujg Y axis +/- 52.5mm, Doosan FANUC-i control, tailstock, coolant, tool setter, parts catcher, 3 jaw chuck,low volt light

Condition: used, Year of construction: 1989, Technical details: number of spindles: 6 spindle passage: 20 mm Article: cam-controlled multi-spindle automatic lathe Manufacturer: Gildemeister Type: GS20-6 Yob: 1989 six-spindle automatic lathe 8 main spindles for bars up to D=20mm All cross units are equipped with a tool holder (from Gildemeister or IMG Attachments) Kodpfxox Hggwe Ag Uedg All longitudinal units are equipped, either fixed or rotating (without collets) An independent feed is installed at position 1 A gear set for one speed is installed A gear set for one cycle time is installed The scope of delivery regarding the tooling equipment could be different like pictures. Please, contact us for getting more information and pictures on mail(at) or *