Used Pvc Cards Punching for sale (3,641)

Condition: new, Year of construction: 2025, functionality: fully functional, ALMI pipe notcher AL2 for pipes with outer diameter Ø48.3 (1 1/2″) and Ø60.3 (2") mm Pipe notcher for pipes with outer diameter Ltodpfx Aajxyyyns Esa Ø48.3 (1 1/2″) and Ø60.3 (2") mm Easy to attach to the wall Ideal for double corner connections Wall thickness max. 3 mm steel, 2.5 mm VA, weight 15 kg

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, ram adjustment: 150 mm, table length: 2,000 mm, table width: 1,200 mm, pressing force: 250 t, stroke adjustment: 40,200 mm, overall weight: 55,000 kg, DGUV certified until: 09/2026, Raster punching and forming press RSU 2500 - 2000 P Desch compact drive unit Electronic press force measurement system Hydraulic overload protection system Lsdoxcbbropfx Aa Eota 3-piece tie rod cast construction Tool holder Table and ram clamps Raster VWA hydraulic roller feed, band width 500 mm, with Topochrom roller coating Ram area 1000 x 2000 mm Strokes: 20 - 150 1/min Stroke adjustment: 40 - 200 mm Optional with Kohler strip feeding system 20030.400/9-2000.2H Optional with Kaschwig soundproof cabin

Condition: used, Punching Machine MUHR & BENDER - MUBEA Model KL 350 / 203 Machine No. KL3509864 Year of manufacture: 1998 Punching force: 35 tons Throat depth: 200 mm Ram stroke: 22 mm Capacity: Ø 28 mm in 10 mm sheet (at 450 N/mm²) Ø 23 mm in 12 mm sheet (at 450 N/mm²) Ram plate: 265 x 70 mm Ram plate thickness: 25 mm outside / 50 mm in the center Table plate: 285 x 250 mm, thickness 40 mm Ltodpfxoxf Utao Aa Esa Table cutout: 115 x 85 mm Drop-through opening in table cutout: 115 x 25 mm Installation height: 125 mm (with table and ram plate) Number of strokes: single stroke via foot switch Motor power: 1.5 kW Power supply: 400 Volt, 50 Hz - Electric foot switch for stroke activation - Manual lever search device for punch movement - Special tool as punching tool Space required (L x W x H): 800 x 800 x 400 mm Weight without tool: 340 kg Weight with tool: 370 kg Good condition

Condition: used, Kann zum Stanzen von Papier, Pappe und Aluminimum eingesetzt werden. Can be used for punching Paper, Cardboard and Aluminum. Stanzmaschine / Punching machine Krause FY 43 UB  Serial-No. 313200 Arbeitsbreite / Working width max. 400mm Ltsdpfoxu N Evsx Aa Esa Zum Stanzen von Papier, Pappe und Aluminimum For punching Paper, Cardboard and Aluminum. 2 Hand-Auslösung / 2 Hand release mit Fußschalter pneumatisch zum Fixierung des Produktes with pneumatic foot switch for fixing the product Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test

Condition: used, Year of construction: 2008, Punching-shearing unit, complete Manufacturer: GEKA Year of manufacture: 2008 Ledpfxoudbzyj Aa Eota MODEL: ALPS-150 Production hours: 400 Application type: Shearing Machine type: Shearing machine Control unit brand: Fagor Technical specifications: General data Width: 2200 mm Depth: 1350 mm Height: 2400 mm Weight: 5000 kg Control unit Manufacturer: Fagor Model: CNC 8070 CNC main language: English CNC language customizable: Yes Main drive shear force 2500 kN Workpiece X : 15000 mm Workpiece Y: 160 mm Workpiece Z: 200 mm Max. table load: 400 kg Max. material thickness: steel 16 mm Electronic main connection 50 hz/3P Additional equipment: 3xloading table 3xside loading table 3xunloading table This GEKA ALPS-150 was manufactured in Spain in 2008 and has been in production for 400 hours. production hours. This machine is a complete automatic solution for punching, marking and shearing angles for medium and large steel profiles. With few working hours this machine is in perfect condition.

Year of construction: 2013, operating hours: 84,545 h, condition: ready for operation (used), General Data Machine weight 17500 kg Main Drive Lsdpfsx D Nwwox Aa Ejta Punching force 220 kN This TRUMPF TRUPUNCH 5000 S10 was manufactured in 2013. It features a Siemens Sinumerik 840D control system, a working area of 3050x1550 mm, and a punching press of 220 kN. Capable of handling sheet weights up to 280 kg and thicknesses up to 8 mm, it includes a Linear ATC for 21 tools and additional options like MULTITOOL and ENGRAVING. Regularly maintained and in good condition. Contact us for more information about this machine. Application Types Punching

Condition: new, Year of construction: 2025, functionality: fully functional, ALMI pipe notcher AL1 for pipes with an outer diameter of Ø26.9 (3/4″), Ø33.7 (1″) and Ø42.4 (1 ¼") mm Pipe notcher for pipes with outer diameter Ø26.9 (3/4″), Ø33.7 (1″) and Ø42.4 (1 ¼") mm Lodpfx Aajxyyyhj Eota Easy to attach to the wall Ideal for double corner connections Wall thickness max. 3 mm steel, 2.5 mm VA, weight 8 kg

Condition: good (used), Year of construction: 1998, Neat used punching machine from Euromac Type CX 1000 30 Capacity 30 ton Unloading 1000mm Overwrap up to 10000mm Including drawer cabinet with lots of tooling and multitool Ljdpfxsxld R Ij Aa Eeta

Condition: ready for operation (used), - invoersysteem voor plat- en hoekstaal - met toevoerwagen en materiaalklem - Vacon 110 software CNC-besturing Hydraulische schaar voor vlak staal VPS 2200 cap: 220 ton maximale lengte: 15 200 mm Ledswlkw Depfx Aa Esta breedte/dikte: 500/25 mm hoek: +/- 45° Hydraulische hoekschaar voor staal VHS 2400 cap: 240 ton maximale lengte: 15 200 mm 200 x 200 mm / 16 mm Hydraulisch ponsen VPO 1000 cap: 100 ton ponsdiameter/dikte: 57/15 mm of 32/25 mm 4 ponsunits voor vlak staal (Verticale positie) 1 ponseenheid voor hoekstaal (horizontale positie) incl. gereedschap Hydraulische teller VNI 1/36 1 codeerschijf 36 tekens tekenhoogte x diepte: 10 x 1 mm Hydraulisch aggregaat VHA 37 37 kW - 250 bar

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2005, machine/vehicle number: M-1581, The Mühlbauer CP 2005 is an industrial punching machine designed for processing card blanks (e.g. smart cards, plastic cards) as part of card production and finishing operations. It combines precision, reliability, and efficiency – qualities that make it ideally suited for production environments with high demands. Lodpfxjx Aiapj Aa Eeta Key features: High-precision card punching The machine feeds card blanks through a punch-and-die tool, punching the cards to exact dimensions. This ensures clean, uniform end products. Hydraulic drive system A hydraulic system controls the position and speed of the punch – providing consistent precision and extended tool life. Modular & customizable tool design Tools can be custom-made or adapted to different card formats or special requirements, keeping the machine highly versatile. Robust construction & continuous operation capability The CP series from Mühlbauer is renowned for high throughput and continuous operation – ideal for industrial card printing and punching installations. Efficient material handling Card material feeding and punching are designed so that cards can be processed further or stacked directly after punching – for example, for lamination, personalization, or packaging. Typical applications: - Manufacturing of smart cards, chip cards, or plastic cards - High-volume production in the card industry - Production of cards for ID badges, access cards, identification cards, etc. - Industrial operations demanding precision, repeatability, and stable processes

Condition: refurbished (used), Year of construction: 2008, functionality: fully functional, machine/vehicle number: 647-230, Lid Punching machine without tools Type Hamba 647-230 Ltodpfxoxqg T No Aa Eea foil width - 230 mm very good condition - with used embossing calender for worm structure - Power connection: 220/380V - three phases - Additional punching tools available - e.g. 1x 2-fold tool - diameter 80.50mm 2x 2-fold tool - diameter 75.50mm 1x 2-fold tool - diameter 59.54mm 1x 2-fold tool - diameter 93.80x120.90mm

Year of construction: 2007, condition: ready for operation (used), Punching force: 165kN, max. sheet thickness: 6mm, max. sheet weight: 150kg, max. punching diameter: 76mm, strokes punching/marking: 600/1300 strokes/min, simultaneous speed: 100m/min, working dimensions X/Y: 2000mm/1250mm, tool stations: 15. Machine dimensions X/Y/Z: approx. 6000mm/6000mm/2200mm, weight: approx. 7500kg. Documentation available. An on-site inspection is possible. Ljdpfxexxzhwe Aa Eeta

Condition: new, Year of construction: 2025, functionality: fully functional, ALMI AL-U for zinc spout in pipes with outer diameter from Ø22 to Ø76 mm Pipe notch for zinc spout in pipes with outside diameters diameter from Ø22 to Ø76 mm for cutting out vent slots from round and rectangular metal pipes from rectangular metal pipes from 22 mm outer diameter Easy to attach to the wall Lodpexyyx Rofx Aa Eeta Wall thickness max. 3 mm steel, 2.5 mm VA, weight 7 kg

Condition: ready for operation (used), Year of construction: 2011, General Data Measurements width 4413 Measurements depth 5860 mm Measurements height 2263 mm Machine weight 14500 kg Control Unit Brand BOSCHERT Main Drive Maximum sheet thickness 6 mm Movement X-Axis Movement 3430 mm Y-Axis Movement 2670 mm Z-Axis Movement 1500 mm Additional Equipment 8 Station Automatic Tool Change tooling, system TRUMPF Ljdpfx Aex D Dn Dsa Eota Rotation with stepless Index (360°) of all tools Up to 64 Tools available (with Revotools) Very short time for tool change All standard Trumpf tools may be used Clamp system for automatic material handling with 2 clamps Stepless programmable clamp positioning Automatic repositioning of the clamps with 2 sheet hold downs for sheets up to 9999 mm This BOSCHERT Multipunch 1500 x 3000 was manufactured in 2011. A robust CNC punching machine, it offers precision and efficiency for your sheet metal operations. Ideal for a variety of punching applications, ensuring consistent performance. Contact us for more information. Application Types Punching

Condition: repair required (used), 3-column press Lsdpfx Ajxxm Aaea Ejta Installation dimensions: W 350 mm x L 200 mm x H 250 mm incl. roller feed

Year of construction: 2022, condition: good (used), Fully automatic die-cutting + creasing of folding boxes Magnopro I-CUT12090 Year of construction 2022 Connection 230 V Material thickness depending on model: 10 mm Data format PLT, DXF, HP/GL, PDF, EPS Sheet feeder Suction air/unrolling device (optional) max. format: 90 x 120 cm Ljdpfst Twnvox Aa Eota Dimensions W x D x H: 320 x 150 x 115 Alignment CCD camera system Speed up to 1000 mm/sec Positioning suction belt Programming Barcode reader, QR code Accuracy +/- 0.1 mm Sheet and roll feeder !

Condition: good (used), Year of construction: 1991, General Features: • Age: 1991 • Punching/Die-Cutting size: 220 x 260mm • Heavy-duty German industrial design • Solid cast-iron frame for high cutting precision • Electric drive system suitable for continuous production • Designed for commercial printing and finishing operations • User-friendly operation • Long lifetime typical of BUSCH guillotines Included: • Standard documentation (if available) • Machine as inspected at current location Condition: • Good working condition for its age Ltedpjxxlbhofx Aa Esa • Can be tested under power • No known issues reported • Clean mechanical condition typical for BUSCH machinery

Condition: good (used), Year of construction: 2021, Automatic machine for the production of PVC tarpaulin covers for tent halls – sold for spare parts. Ltsdpfx Ajx Dk H Tja Esa Italian-made welder for tarpaulins by SolarEdge Automation Machines, manufactured in 2021. The machine has seen limited use for manufacturing PVC covers for tent structures. Machine specifications: - Material: PVC with a weight of 450 g/m2 - Material specifications: max. width – 3250 mm, min. width – 285 mm, max. roll weight – 1000 kg, max. external diameter – 600 mm - PVC or PE keder rope with a diameter of 4/5/7 mm - Minimum product length: 1500 mm - Minimum finished product width: 800 mm - Power supply: 400V The machine welds together the surfaces of two material rolls, cuts them to the required width, and thermal-bonds the keder cord to the edges of the material. The machine consists of: - 2 material feeders with automatic material position adjustment - Knives for cutting material to required width - Welding module for joining two pieces of material - Modules for fusing the keder tape to the material edges - Module for feeding and welding the keder cord with automatic tension control - Encoder for product length control - Knife for cutting the product to the set length Welding is performed with high-performance Leister hot air heaters. Components used in the machine: 1. Heaters and blowers by Leister 2. Control systems, electrical and safety components by Omron and Siemens 3. Drives and gearboxes by Seipee and Nidec 4. Pneumatic systems by Festo and SMC 5. Vision system by HIKVISION 6. Linear guides and carriages by HIWIN Machine is only sold as a complete unit!

Condition: good (used), Year of construction: 1987, operating hours: 42,846 h, machine/vehicle number: P2440355, CNC turret punch press with 24 stations Control: FANUC 6M Operating hours: 42,846 h Spindle motor: 5.5 kW Capacity: 20 tons Number of stations: 24 Material thickness: 6.35 mm Hole size: 88.9 mm Lsdpfx Aexqr Sqea Eota Sheet size WITHOUT REPOSITIONING: 1000 x 1000 mm WITH 1 REPOSITION: 2000 x 1000 mm Max. sheet weight: 50 kg Speed: 30 rpm Stroke rate: 200 strokes per minute Net weight: 8,500 kg Dimensions (L x W x H): 4,500 x 3,200 x 2,200 mm

Year of construction: 2009, condition: ready for operation (used), Main Drive Punching force 1250 kN Ltedpfx Aasx D I U Uj Eja This KALTENBACH KPS 506 was manufactured in 2009. It's an automatic punching and shearing system for flat bars and angle profiles, featuring a 6-tool automatic changer with hole diameters ranging from Ø5–40 mm. It supports straight and mitre cutting with a working range of 50 × 5 mm to 500 × 25 mm. Includes NC-controlled automatic feeding and a finished part delivery unit. Contact us for more information about this machine. Application Types Punching

Condition: used, Year of construction: 1997, sheet width 1015 mm Ljdpfxouiz Iws Aa Eeta plate length 1015 mm plate thickness 6,0 mm Punching capacity 25 t punch diameter 88,9 mm total power requirement 16 kW weight of the machine ca. 12000 kg dimensions of the machine ca. 4000 x 2320 x 2300 mm Equipment: - Tool changer with 20 positions - FANUC Series O-P control - Foot pedal - Operating instructions (English)

Condition: used, Year of construction: 1993, functionality: fully functional, Speed: up to 8,000 sheets per hour Ledex Anvpopfx Aa Eota Format (cm): max. 102 x 72 // min. 40 x 35 Die-cutting force: up to 2.5 MN (250 t) Operating hours: approx. 38,000 hours Equipment / further details: Stripping system (stripping station) with centering frame Tools

Condition: excellent (used), Year of construction: 2015, HEIDELBERG Nela plate punch suitable for HD SM 52 / 74 / 102 and XL machines. Hole spacing: 425 mm and 780 mm. Year of manufacture: 2015. Ltedpfx Aexq Txlja Esa

Year of construction: 1997, condition: ready for operation (used), General Data Ltsdpox D Nn Ajfx Aa Esa Machine weight 14500 kg Main Drive Punching force 300kN This Finn-Power F6-25 5B was manufactured in 1997. A robust CNC punching machine with a machine weight of 14500 kg and a punching force of 300 kN. It operates at a maximum working pressure of 300 BAR. If you are looking to get high quality punching capabilities consider the Finn-Power F6-25 5B machine we have for sale. Contact us for more information. Application Types Punching

Year of construction: 2006, condition: ready for operation (used), Control Unit Brand SIEMENS Model 840D This Finn-Power SG-6 was manufactured in 2006. It features a Siemens 840D control system, automatic loading, four clamps, and a 20-piece revolver with a well-organized layout. Additionally, it includes an angle shear, five-piece C-conveyor, and a new model STS palletizing unit. The machine is fully operational and available for viewing. Contact us for more information. Application Types Lsdpjx D N N Hsfx Aa Ejta Punching