Control card

Robosoft HACO HACC 013 PPES 30135

Year of construction: 2013, condition: ready for operation (used), A Rehm Invertig Pro 350 AC DC and a Rehm Invertig Pro 450 DC are available, used and in good condition. 1) Invertig Pro 350 AC DC, standards: IEC 60 974-1 IEC 60 974-2, welding current range TIG: 3-350A, output voltage U₂ at maximum current: approx. 24V, open circuit voltage U₀: approx. 91V, duty cycle 100 percent for TIG at 350A, mains voltage input: three phase 400V 50Hz, protection class: IP23S, protection category: S, setting range: 3-350A for TIG in this AC DC version, duty cycle 100 percent at 40°C 350A for TIG 100 percent duty cycle, input fuse protection: 32A at 3x400V for the 350 AC DC version, length: 520mm, width: 360mm, height: 460mm, weight: 29.5kg for AC DC version. 2) Invertig Pro 450 DC, standard: IEC 60 974-1, welding current range TIG: 3-450A, output voltage U₂ at maximum current: approx. 28V, open circuit voltage U₀: approx. 91V, duty cycle 100 percent at 450A TIG, lower for electrode welding approx. 60 percent, mains input: 3x400V 50Hz, protection class: IP23S, duty cycle at 100 percent 450A TIG at 40°C, electrode welding current approx. 360A at 100 percent duty cycle for electrode in the 450 DC version, input fuse protection: 32A at 400V three phase for 450 versions, length: 520mm, width: 360mm, height: 460mm, weight: approx. 28kg. An on-site inspection is possible. Fodpfx Adsxddamoaspb

Condition: new, Optimum OPTIdrill DH 40CT column gear drilling machine with cross table 3034349 The versatile machines for milling and drilling. TECHNICAL DATA General information Tightening rod M 16 Dimensions and weights Column diameter 115mm Length (product) approx. 1060mm Width/depth (product) approx. 745mm Height (product) approx. 2090mm Weight (net) approx. 370kg Drilling capacity Drilling capacity steel (S235JR) 32mm Continuous drilling capacity steel (S235JR) 25mm Tapping capacity steel (S235JR) M 16 End mill size max. 25mm Cutter head size max. 76mm Drilling table Drilling table work surface length 730mm Drilling table work surface width 210mm Drilling table T-slot size 14mm Drilling table T-slots quantity 3 Drilling table T-slot spacing 63mm Load capacity drilling table 50kg Distance spindle - drilling table max.600mm Speed range Speed range 95 - 3200min¯¹ Number of speed ranges 2 x 6 steps Electrical data Drive motor power 1.1 / 1.5kW Supply voltage 400V Mains frequency 50Hz Machine base Distance spindle - machine base max.1180mm Machine foot working surface length 495mm Machine foot working surface width 375mm Machine foot T-slot size 14mm Machine foot T-slots quantity 2 Machine foot T-slot distance 230mm Machine foot length 670mm Machine foot width 470mm Spindle Quill stroke 120mm quill diameter 75mm Spindle holder MK 4 throat 280mm Fpedpfx Ast N Rkpsdaeb Drill head rotation 360 Drill head inclination 45° Manual quill feed Drill head height adjustment 260mm Travel distance Manual X-axis travel 480mm Manual Y-axis travel 180mm Manual Z-axis travel 560mm SCOPE OF DELIVERY Sprocket chuck 1 - 13 mm / B 16 T-nuts Adapter MK 4-MK 3 Arbor MK 4 / B16 Operating tool

Condition: used, Year of construction: 2008, pressure 90.0 t chamfer lenght 3100 mm distance between columns 2600 mm column arm 410 mm ajustment speed 100 mm/sec working feed 10.0 mm/sec return speed 100 mm/sec back stop - adjustable max. 750 mm stroke 260 mm dayligth 460 mm table height 880 mm oil volume 200 ltr. Number of working hours ca. 47.100 h total power requirement 7.5 kW weight of the machine ca. 7500 kg. range L-W-H 4250 x 1800 x 2450 mm good condition - with 1x set of new bending tools (!!) current new price approx. 80.000 euros special price on request Fpsdpfexacdcex Adaob - in checked condition - machine video - ?v=Xlb8EgQ8088 Equipment: - electro-hydraulic CNC press brake - with DELEM CNC control model DA 66W * graphic 2D programming * automatic bending sequence calculation and collision detection * high-quality color LCD screen (TFT) - swiveling operation, front left - CNC controlled axes: Y1 + Y2 + X + R - CNC electro-motorized back stop (X axis) * with 4x manually adjustable stop fingers - CNC electro-motorized height adjustment of the back stop (R axis) - manually adjustable table crowning * including analogue value display * including hand crank for adjustment - AMADA upper tool Quick-change clamping * including crowning device in the tool holder - AMADA die adapter rail, bottom - 2x front, movable support arms ("sliding" system) - side protective device (swinging doors) - rear protective device (sliding door) - 1x freely movable 2-hand/foot control - Operating instructions (PDF) Special accessories included: - 1x NEW split set of upper tools (4x 835 mm) * Angle 85° / Radius R 0.8 mm / Height 66.5 mm - 1x NEW split set of lower tools (4x 835 mm) * V openings: 16/22/35/50 mm * Height 60.0 mm / Angle 85° / Material=C45

Condition: used, mileage: 425,893 km, power: 206 kW (280.08 HP), first registration: 02/2011, fuel type: diesel, tire size: 315/70R22.5, axle configuration: 4x2, wheelbase: 3,550 mm, fuel: diesel, color: brown, emission class: euro5, suspension: steel-air, total length: 5,790 mm, total width: 2,550 mm, Year of construction: 2011, Equipment: ABS, cruise control, electric window regulation, spoiler, traction control, = Other options and accessories = - Roof spoiler - Refrigerator - Sun visor = Remarks = Scania P280 First registration: 25-02-2011. in combination with: TRAVEL SUPREME INC First registration: 10-11-2006. Max weight: 9,000 kg. Trailer is used as a mobile training room. 2 x slide-outs. Toilet. Kitchen. Stove. Ovens. Fpedpfowahuijx Adasb Fridge. Heater. = Further information = Tyre size: 315/70R22.5 Brakes: Disc brakes Front axle: Steered; Tyre profile left: 75%; Tyre profile right: 75%; Suspension: Leaf suspension Rear axle: Twin tires; Tyre profile inner left: 80%; Tyre profile outer left: 80%; Tyre profile inner right: 80%; Tyre profile outer right: 80%; Suspension: Air suspension Unladen weight: 7,470 kg Payload: 1,530 kg Gross weight: 9,000 kg Type number: P 280 + trailer - 2 X SLIDE OUT = Company information = ALL PRICES ARE NET FOR EXPORT, Joris Versteijnen (NL-DE-GB), Wouter Greutink (NL-DE-GB-ES-IT). We speak Russian. We strive to provide correct information but no rights can be derived from the posted texts.

Condition: excellent (used), Year of construction: 2007, Type: Industrial robot Brand: Fpjdpfor Iy Nkjx Adaeb Hyundai / Hanwha TechM Year of production: 2007 Maximum load: 200kg

Condition: used, mileage: 1,251,049 km, power: 375 kW (509.86 HP), first registration: 09/2019, fuel type: diesel, number of seats: 68, gearing type: automatic, emission class: euro6, color: white, brakes: retarder, Equipment: ABS, air conditioning, bathroom, electronic stability program (ESP), navigation system, parking heater, +++ Bodywork damage repaired + newly painted +++ +++ Fixed price +++ Engine: Mercedes-Benz Emission standard: Euro 6 Transmission: Automatic Seating capacity: 66+1+1 sleeper seats with lap belts _____ Safety features * Retarder / Intarder * Cruise control * Adaptive cruise control * ABS, ASR, ESP, EBS * Fog lights * Immobiliser * Xenon headlights * Brake assist * Lane departure warning system * Reversing camera * Multifunction steering wheel Passenger compartment * Auxiliary heater * Wood-effect flooring * Air conditioning * Tables * Curtains * Overhead luggage racks * Luggage nets * Individual air vents * Reading lights * Double glazing * Footrests * Refrigerator * Centre WC * Leather headrest inserts * Tour guide microphone * Driver’s microphone Exterior * Tow bar preparation * Matrix: Mobitec * Lifting / lowering device * Power steering * Digital tachograph (with card) * Sun visor * Electrically adjustable mirrors * Central locking * Panoramic roof * Roof hatches, fans, roof ventilators Audio and communication * Navigation system * Inverter * Radio / CD * USB port on radio * Video / DVD Other features Fedpfx Aev S Rn Dodaspb * Vehicle dimensions: length 14.00 m, width 2.55 m, height 4.00 m * Wheel trims * Twin tyre arrangement * Tyre condition: front axle 60%, middle axle 60%, rear axle 60% Our internal vehicle number: 11435 Errors excepted. Images and text may differ from the actual vehicle. Over 300 additional vehicles in stock.

Condition: used, mileage: 29,850 km, power: 110 kW (149.56 HP), fuel type: diesel, gearing type: automatic, first registration: 11/2021, next inspection (TÜV): 01/2024, emission class: euro6, color: black, number of seats: 6, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), soot filter, All of the vehicles we offer are in stock and can be viewed at any time. All photos are original images of the respective vehicles. VIP shuttle with great amenities and, above all, a completely discreet appearance. From the outside, it's almost impossible to see what's hidden behind the doors. Enjoy your rides in absolute peace and quiet behind the retractable partition and shorten your time with the built-in flat-screen TV. Take a seat on the comfortable, adjustable leather seats. MULTIMEDIA AND COMMUNICATION: * On-board computer * Radio * Hands-free system * Bluetooth * USB port * Touchscreen * TV SAFETY: * ABS * ESP * Stability control * ASC (Traction control) * ASR (Acceleration skid regulation) * Power steering * Cruise control INTERIOR AND COMFORT: * Central locking * Electrically adjustable exterior mirrors * Electric windows * Leather upholstery * Multifunction steering wheel Fjdpfxev Uhkno Adaopb * Leather-trimmed steering wheel * Automatic climate control EXTRAS: * Tinted side/rear window * Sliding door on the right * Electric sliding door on the right * Partition wall * Particulate filter * Metallic * Daytime running lights Affordable financing and leasing offers are available, even without a down payment. Our sales consultant will be happy to advise you. ---- Trade-ins are possible at any time with fair conditions. ---- Take advantage of our diverse service packages, e.g. B. Warranty extension, pickup from the nearest train station (each subject to an additional charge; further information on our website) ---- Opening hours: Mon-Tue and Thu-Fri 9:00 a.m. to 6:00 p.m., Wednesday 9:00 a.m. to 4:00 p.m., Saturday 9:00 a.m. to 1:00 p.m. (On Saturdays, please make an appointment to avoid long waiting times) ---- The information provided here is intended to help identify the vehicle and does not constitute a binding description or guarantee of the scope of equipment. We assume no liability for typographical or transmission errors. All information in the advertisements is non-binding and without guarantee and must be verified by the buyer upon receipt. Subject to prior sale.

Condition: good (used), functionality: fully functional, Year of construction: 2005, Used 3-meter CNC press brake from Safan Model: H Brake 120 3100 Year: 2005 Capacity: 3100 x 120 tons CNC control of Y1, Y2, X, XDelta, R, Z1, and Z2 axes WILA new standard tool clamping Fedpfx Adoxtbqujajpb Upgraded ESA graphical controller Lazersafe laser system

Condition: excellent (used), mileage: 337,227 km, first registration: 06/2020, fuel type: diesel, axle configuration: 6x4, wheelbase: 3,350 mm, fuel: diesel, fuel tank capacity: 600 l, brakes: engine braking, color: beige, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: air, Year of construction: 2020, Equipment: ABS, AdBlue, air conditioning, central locking, cruise control, electric window regulation, fog lights, fridge, navigation system, parking heater, power mirror, soot filter, spoiler, = Additional Options and Equipment = - Aluminum fuel tank - Brake booster - Roof spoiler - High beam - Low noise - Speed limiter - Alloy wheels - Air suspension - Air horn - Particulate filter - Sleeper cab - Side skirts - Sun visor - Stability control - Auxiliary heater (stand heating) - Toolbox - Xenon lighting = Further Information = Technical Data Number of cylinders: 6 Engine displacement: 16,123 cc Unladen weight: 10,635 kg Transmission Gearbox: I-SHIFT, automatic Axle Configuration Suspension: Air suspension Front axle: Alloy wheels; Steering axle Rear axle 1: Twin tyres; Alloy wheels Rear axle 2: Twin tyres Fedjuxvduepfx Adaspb Condition Technical condition: Very good Visual condition: Very good VOLVO FH 16.750 6X4 WITH XXL CABIN EURO 6 L PACKAGE 750 HP DRIVELINE 6X4 WHEELBASE 335 CM FULL AIR SUSPENSION FH XXL GLOBETROTTER CABIN, FULLY EQUIPPED: - Air conditioning (CLIMA) - Navigation - Refrigerator - Microwave - Coffee machine - Leather interior - TV prep - Extra wide bed - Numerous cabinets - Volvo Dynamic Steering THE XXL GLOBETROTTER CABIN IS 13 CM LONGER AND 25 CM WIDER. I-SHIFT AUTOMATED GEARBOX ADJUSTABLE FIFTH WHEEL TOOLBOX ALCOA WHEELS XENON LED FOLLOW US ON INSTAGRAM: GEURTSTRUCKS WE SPEAK GERMAN HABLAMOS ESPAÑOL WE SPEAK ENGLISH

Condition: new, Bernardo geared drill GB 35 THS Technical specifications Drilling capacity in steel 35 mm Drilling capacity in cast 40 mm Thread cutting max. M24 Drill Chuck 1-13 mm / B-16 Dome MK 4 Spindle speed (12) 43-2355 U/min Feed range 0.1 / 0.2 / 0.3 / 0.4 mm / Rev Throat depth 340 mm Distance from spindle / table max 580 mm Distance from spindle / base plate 1185 mm Quill stroke 200 mm Column diameter 160 mm Table size / T - slot size 540 x 440 mm / 14 mm Work surface of bottom plate 430 x 440 mm Engine power 1,3 / 1,8 kW Machine dimensions (W x D x H) 660 x 900 x 2240 mm Weight approx. 553 kg Fodpjd Du Twsfx Adaopb Scope of delivery • Drill Chuck 1-13 mm / B-16 • Drill Chuck Arbor MK 4 / B-16 • Reducing bushing MK 4 / 3, MK 4 / 2 / MK 3 / 1 • Motorized table hub • Electromagnetic spindle feed • Initial filling with Shell Tellus 46 • Automatic tool ejector • Thread cutting device • Digital speed display • LED machine luminaires • Coolant system • Digital drill depth indicator • Height-adjustable guard