Used Pvc Cards Punching for sale (3,680)

Condition: used, IMV Punching Press Type: DM 125 Bodpfxexnxlxe Adxsww Year of manufacture: 2016 Pressing force: 1,250 tons Stroke adjustment: 250 - 500 mm Ram adjustment: 300 mm Strokes per minute: 5-35 Installation height: 1,150 mm Table area: 4,500 x 1,800 mm Ram area: 4,500 x 2,000 mm

Year of construction: 2001, condition: used, gebraucht 2001 9647 prompt, Zwischenverkauf v Italien 24400 € 1 30 to 1250+N x 1000 mm 1250 mm 1000 mm 40 m/Min Bwedpewirkgefx Adxsw 30 m/Min 50 m/Min 30 mm 730 1/Min 300 1/Min 980 mm 4 kW 115 l 4000 mm 2780 mm 1900 mm 4000 x 2300 x 1900 mm + Z mm 4800 kg With 6-way multitool holder MTE6 (max. Dm. 24 mm) 2 Clamping claws Table with Brushes, table dimension 1970 x 2260 mm Foot pedal 2 pcs. additional single matrix holders PC with Euromac Software Eurowin 8.36 Max. Punching force 300 kN Automatic repositioning up to 10.000 mm Max. Punching diameter for single tool 88,9 mm, Max. Punching diameter Multitool Holder MTE6 Dm. 24 mm Max. Opening the clamping claws 7 mm Transport width: 2350 mm User Manual in english and italian CE declaration available WITH LARGE TOOL PACKAGE several pieces of each of the following dimensions: Round: Dm. 2,5/2,8/3/3,12/3,2/3,5/3,9/4,1/4/4,5/5/5,2/5,5/6/7/7,5/8/8,5/9/9 ,5/10/10,5/11/11,5/12/12,5/13/13,5/14/15/16/18/19/20/21/23 Square: 10/12/13/15 mm Rectangle: 5x2/20x2/22x4 mm Oblong hole: 10x6,5/12x8,5/12,2x10,7/18x5 mm

Condition: used, Year of construction: 2017, functionality: fully functional, machine/vehicle number: 673517306, Used Durma RP9 Punch press. Bjdpew Uf Iujfx Adxsww No photos as currently safely stored in workshop behind other equipment. Seen working in September 2024. Decommissioned by osupplier and moved to our unit. We have not been able to set it up as not enough room and planned moved fell through. Films of machine working availalbe on request and machine is available to view in decommissioned state.

Year of construction: 1988, condition: excellent (used), machine/vehicle number: 0581 007 04, Speed: up to 9000 sheets per hour Format (cm): max. 102 x 72 // min. 40 x 35 Cutting force: up to 2.5 MN (250 t) Working hours: approximately 38,000 hours Equipment / Additional information: Stripping system (stripping station) with centering frame Die-cutting plates (over 500 pieces) Tools Technical data Convertible stock: - paper: min. 80-90 g/m2 - cardboard: max. 2000 g/m2 - corrugated board B and E-flute: max. 4 mm Sheet size: min. 35 x 40 cm // max. 72 x 102 cm Cutting size : - with front waste max. 70,5 x 102 cm - without front waste max. 72 x 102 cm Cutting force: max. 2.5 MN (250 t) Running speed/hour: Depending on board quality and kind of job: max. 9000 sheets Pile height: - pallet feeder: max. 135 cm - universal feeder: max. 140 cm - delivery: max. 120 cm Bjdpfexixhiex Adxsww - delivery with pallet conveyor: max. 102 cm Power of main motor: 15 kW (20 HP) Connected load: 55 kWA Net weight: 22000 kg Gross weight: 25000 kg

Year of construction: 2005, condition: excellent (used), pneumatic punching machine Bodpfx Adjff Apwoxsww

Year of construction: 2020, condition: ready for operation (used), General Data Measurements width 5710 mm Measurements depth 6370 mm Measurements height 2220 mm Machine weight 14000 kg Control Unit Brand BOSCH Model MTX Main Drive Number of axis 6 Turret Number of turrets 1 Tools Number of station 12 Media Oil tank 300 liters Additional Equipment Hydraulic Motor Power: 11 kW Axes Drive Type (C1 and C2): Direct drive Hydraulic Punching Force: 30 tons Portable CNC Control Panel Work Chute: Automatic system to take out cut parts Mobile Storage Box for Cut Parts Waste Box Light Barriers Bwedpsxqtfxofx Adxew This 6-axis Baykal BPM-T 1525X30 was manufactured in 2020, featuring a robust 30-ton hydraulic punching force and a versatile tooling system with 20 stations and indexable tool holders. It supports a working range of 3000 × 1500 mm and rapid axis speeds (X: 100 m/min, Y: 80 m/min). Equipped with Bosch MTX CNC control and Lantek CAM software, it ensures precision and efficiency. If you are looking to get high-quality punching capabilities, consider the Baykal BPM-T 1525X30 machine we have for sale. Contact us for more information. Application Types Punching

Condition: used, ROVETTA Transfer Press Type: S4-15000-5500x2500 Press force: 1,500 t Strokes: 8–24 spm Stroke length: 763 mm Slide adjustment: 400 mm Shut height: 1,200 mm Table area: 5,500 x 2,500 mm Slide area: 5,500 x 2,500 mm Opening between uprights, lateral: 3,400 x 1,900 mm Bedpfx Aexnxlfodxoww

Condition: excellent (used), Year of construction: 2010, Boschert TRI 1500 CNC Z Rota Revo TRUMPF quick-change tool system Punching force: 3x 280 kN (28 tons) Station 1: Trumpf system tool - Size 3 (105 mm) with spray device Station 2: Trumpf system tool - Size 3 (105 mm), free-rotating/indexable Station 3: Trumpf system tool/Boschert Revotool - Size 3 (105 mm), incl. Revotool 8-station tool holder Travel distances: X-axis 3,000 mm (extension up to 9,999 mm) Y-axis 1,580 mm Throat depth: 1,730 mm Tool system: Trumpf size 1-3 (105 mm) Labod 32060 graphic control / workshop-programmable Max. sheet thickness: 6 mm (clamping opening) Max. stroke height: 90 mm, infinitely programmable up and down Slug extraction system Ball rollers in the machine table Table width left + right: 3,200 mm each Table depth: 2,810 mm Table height: 900 mm Overall width: 6,482 mm Overall depth: 4,600 mm Overall height: 2,110 mm Drive power: 25 kVA Bsdpfx Adjid I D Aexeww Machine weight: 15,800 kg Hydraulic oil capacity: 160 l Color: Blue RAL 5017 / Light Grey RAL 7035 Year of manufacture: 2010 Very well-maintained condition – overhauled Comes with extensive accessories

Condition: excellent (used), Heidelberg Cylinder 56 x 77 Bodpfx Adswzyg Hoxsww

Condition: good (used), Year of construction: 1979, TOSI VERONA Max. size: 1200x1800 mm Min. size: 400x400 mm In production Location: Germany Bodpsxdu Nrsfx Adxsww

Condition: good (used), We are offering several dies, punches, reducing sleeves, and a quick-release clamping set for Peddinghaus here. Bjdpfx Aew Tri Nedxeww Exact details can be found in the PDF.

Condition: new, tube diameter 1/4" max. 2" Zoll wall strength max. 3,0 mm engine 400Volt / 1,5KW Bwodpjv Skzksfx Adxow weight 90 kg dimensions 07 x 0,4 x 0,3 m Pipe notcher Maximum wall thickness 3.0 mm Suitable for the following pipes: 1/4", 1/2", 3/4", 1", 1 1/4", 1 1/2", 2"

Condition: excellent (used), Year of construction: 2006, Kaiser Press KSTU 500-30-75 RK Press force: 500 tons Stroke adjustment: 50-250 mm Ram adjustment: 200 mm Strokes per minute: 20-80 1/min Max. installation height: 700 mm Table area: 2,500 x 1,400 mm Ram area: 2,500 x 1,250 mm Feeder Andritz Kaiser Max. strip width: 800 mm Max. strip thickness: 5.0 mm Straightening machine FECKER Bsdpfx Ajxnxk Iedxsww Max. strip width: 800 mm Max. strip thickness: 6.0 mm Decoiler FECKER Strip width: 800 mm Load capacity: 8,000 kg

Condition: good (used), Year of construction: 1996, functionality: fully functional, machine/vehicle number: 3CP074036T, punching force: 30 t, total height: 1,800 mm, total width: 2,030 mm, total length: 2,480 mm, working range: 750 mm, type of input current: three-phase, travel distance X-axis: 1,250 mm, travel distance Y-axis: 750 mm, travel distance Z-axis: 105 mm, overall weight: 3,200 kg, table width: 1,300 mm, table length: 2,480 mm, input current: 16 A, compressed air connection: 8 bar, power of the servo motor: 4 W, positioning speed: 35 m/min, positioning accuracy: 0.1 mm, Gereedschap opname Trumpf 60mm. Draaiend te zien. Bjdpfx Asvypmusdxjww

Condition: good (used), functionality: fully functional, Passage width: max. 150 mm Passage height: max. 5.0 mm Bwjdsxg Rxuspfx Adxew Other: Suitable for cutting stamping grids Actuation via the press ram, return stroke by springs

Condition: used, Single column eccentric press KRUPP type PEKRD 125 h Machine No. 2861 Year of construction 1977 pressure force 125 ton. throat 400 mm table size 950 x 750 mm ram area 800 x 540 mm table opening 100 x 250 mm stroke adjustment 8 to 160 mm ram adjustment 100 mm Installation height of largest stroke at top max. 550 mm Stroke rate 60 strokes/min. Table height above floor 800 mm Motor power 10 kW Mains connection 380 Volt, 50 Hz - Hydraulic overload in ram - Compressed air clutch-brake combination ORTLINGHAUS - ram weight balancing cylinder Bwjdpfx Aodzqddedxsw - motorized ram adjustment - Table plate with ball rollers - Two-hand operation - grease central lubrication HELIOS - stroke counter - UVV 7n 5.1 §4a, paragraph 2 No. 3b for manual insertion work Space requirement L x W x H 2300 x 1800 x 3200 mm weight approx. 10 ton. good condition (very little used)

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, A used four-column automatic punching press MABU with MPC200 control in very good technical condition. Bjdpsuh U Etofx Adxjww Compressive force 30° before UT: 250kN Stroke rate, infinitely variable: 80-400 rpm Stroke adjustment: 7-62mm Tool holder: Diameter 40H7x90mm Clearance between the front/side uprights: 404/334mm Further tech. Data see pdf- document. Tech. Data and dimensions: Errors excepted.

Condition: good (used), Year of construction: 1972, functionality: fully functional, pressing force: 25 t, space requirement height: 2,800 mm, space requirement length: 1,600 mm, space requirement width: 2,200 mm, Four-column punching press Manufacturer: Hermann Raster KG Type: HR SL4S Working area Distance from ram center or distance between the columns under the guide: 160 mm Smallest / largest distance from clamping table to ram at maximum stroke: 260 / 300 mm Smallest / largest distance from clamping table to ram guide: 110 / 150 mm Clamping table Clamping area: 600 x 320 mm Clamping ram Smallest / largest stroke: 0 / 40 mm Ejector stroke (max. 20 mm) Stroke rate: 200-1000 per minute Straightening range: 70 mm Clamping area: 400 x 250 mm Clamping pin: Hole diameter: 40 mm; Depth 70 mm Safety device Electro-pneumatic clutch and spring-loaded brake Power Normal pressure 25,000 kp Cutting capacity 625 mm², K=40 kg/mm² Bodpfx Adswcxccjxjww Floor area required without soundproofing 1 m x 1 m x 2.45 m Weight without soundproofing 3,600 kg Floor area required with soundproofing 1.60 m x 2.20 m x 2.80 m Drive type Voltage 380-660 V Current type: Three-phase current Total power requirement 6 kW Drive: AEG, AM 132 MX4, power 7.5 kW, 2860 rpm Gearbox: PIV, FK NA HB 22 Control cabinet: AEG, 190300 Central lubrication: Woerner, PA 15.M1 Flat/V-belt 3, 17 x 2220, rubber material Drive: Variable speed drive Pull width: 65 mm Pull diameter: 224 mm Special features Gripper feed Z2 Useful width: 180 mm Soundproof cabinet sta Schalltechnische Anlagen GmbH The machine is connected to the power supply and can be tested.

Condition: used, Year of construction: 2000, pressure 130 t no. of strokes 50-250 Hub/min sheet width 250mm mm stroke 8-120 mm ram - range of adjustment 100 mm table surface area 1600x800 mm ram surface 1600x800 mm hole in the table 1100x250 mm table height 1000 mm 370 mm Bwodpfx Aoxh Sypodxjw weight of the machine ca. 24 t dimensions of the machine ca. BxTxH 3900x2500x3800 mm

Condition: new, punching pressure 28.0 t punching cross-cut in cmm 31 in 7.0 mm ST throat 250 mm dayligth 223 mm no. of strokes 10 - 30 Hub/min oil volume 32.0 ltr. work height max. 1033 mm total power requirement 3.0 kW weight of the machine ca. 553 kg dimensions of the machine ca. 730 x 540 x 1530 m Furnishing: Bedpfjw U U S Njx Adxoww - Punch quick-change device up to Ø 31 mm - green series - installed: round punch no. 5 Ø 25.0 mm and round die no. 3 Ø 25.7 mm - Free: LED lighting in the punching area - Swiveling scraper (plates exchangeable) - Various material support tables are available separately - Brace - 2-step foot switch, with double press for grain search function - electrical controls - Stroke length and stroke position continuously adjustable - integrated hydraulic unit with oil filling - Performance specifications apply to a material strength of 450 N/mm² - Main connection cable and plug for 16 amps are not included in the scope of delivery

Condition: ready for operation (used), Year of construction: 1976, Pressing force: 20 t Table size: 340 x 320 mm (W x D) Ram size: 160 x 230 mm with wedge plate Bjdpfx Adoxg Rvaexsww Table opening: 70 x 180 mm Stroke rate: max. 150 strokes/min, infinitely adjustable via PIV gearbox Stroke: 10...50 mm Ram adjustment: 50 mm Equipped with: • Swiveling extension plate for feed • Motorized central oil lubrication • Slide guide with V-prisms • Machine body made of cast iron • PIV gearbox for stroke rate control • Free-standing control panel • 3 cams for feed, etc. • Manual setup via hand lever • Forward and reverse operation • No documentation or electrical diagrams available Optionally, we can offer a pneumatic feed for the press.

Condition: good (used), We are offering several dies, punches, reducing sleeves, and a quick-release clamping set for Peddinghaus here. Bedpfx Adow Trkaoxoww Exact details can be found in the PDF.

Condition: used, Year of construction: 1991, pressure 70.0 t punching cross-cut in cmm 27 in 20 mm punching cross-cut in cmm 32 in 14 mm work height max. 1060 mm column arm 500 mm weight of the machine ca. 1500 kg. total power requirement 7.0 kW range L-W-H 1550 x 1200 x 1950 mm Bedsxabu Topfx Adxeww good / well-maintained condition (!!) New price approx. 21.000 euros Special price on request Equipment: - electro-hydraulic hole punch, with large projection - large GEKA stop table with movable stop system - sheet metal stripper with stripper plates - stepless stroke adjustment - die base - 1x freely movable foot switch - operating instructions (PDF)

Condition: excellent (used), Year of construction: 2007, Pressing force: 2,000 kN Table size: 2,300 x 1,100 mm (W x D) Pass-through opening: 2 pcs. 700 x 300 mm Distance between uprights: 2,460 mm Ram clamping area: 2,300 x 1,100 mm Lateral clearance: 740 mm Die height: 550 mm (ram down, adjustment up) Stroke rate: 30 - 140 strokes/min, steplessly adjustable Stroke: 20...220 mm Ram adjustment: 150 mm (motorized) Main drive: 30 kW Weight: approx. 27,500 kg Features: • Siemens + Beckhoff control • 8-fold slide guide • Motorized oil circulation lubrication • Automatic ram adjustment • Hydraulic overload protection • Pneumatic ram counterbalance • Electromechanical stroke adjustment • Siemens + Beckhoff control system • Beckhoff panel visualization • T-slots in table and ram (28 mm, spacing 300 mm) • Vibration-damping machine feet • 4 pcs. tool safeties + 4 pcs. cam outputs • Ram with 20 mm wide central slot • Hydraulic tool clamping on table and ram • Hydraulic roll blocks for tool change Coil line by Kemmerich, consisting of: Decoiler Type: V 5000 A – SH – 600 - S Load capacity: 5,000 kg Coil width: 100 - 600 mm Expansion range: 470 – 520 mm Coil outside diameter: 2,000 mm • Motorized auxiliary drive • Pneumatic disc brake • Hydraulic expansion by wedge segments • Rear support disc and 3 attachable limiting arms at front • Hydraulically actuated and driven hold-down roller, laterally adjustable by handwheel • Load carriage (stationary, decoiler moves hydraulically), lifting height 770 mm with 4 limiting bars Straightening machine Type: RMBMZ 50.600 UF Coil width: 40 - 600 mm Coil thickness: 0.5 – 4.0 mm Max. cross-section: 1,200 mm² Number of rollers: 9 pcs. Roller diameter: 50 mm Number of feed rollers: 2 pcs. Feed roller diameter: 100 mm Speed: 3 - 25 m/min Features: • Rollers hardened, ground and hard chromed • Drive of lower straightening rollers and feed rollers via gear transmission • Motorized roller frame adjustment, precision 1/100 mm, settings storable • Upper rollers ventable by 100 mm • Feed roller pneumatically ventable • Lateral strip guidance at entry with handwheel and leadscrew • Outlet roller basket and loop bridge • Loop control via ultrasonic sensor • Hydraulic introduction aid, consisting of table with extendable tongue and upper bending roller Roll feed Coil width: max. 600 mm Features: • Rollers hardened, ground, and chromed • Driven by gear motor • Upper roller hydraulically ventable • Height adjustment hydraulic Bsdpfx Aov T Anlodxeww • Lateral strip guidance at entry with handwheel • Roller basket Additional features: • Pneumatically swiveling loop bridge between straightener and feeder • Safety fence around the entire line • Decoiler and straightener on common base frame • Various spare rollers for straightener The complete line can still be inspected under power at the current owner's site!

Condition: good (used), We are offering several dies, punches, reducing sleeves, and a quick-release clamping set for Peddinghaus here. Bwedpfx Adjw Trkgoxjw Exact details can be found in the PDF.