Used Punching Shear for sale (2,959)

Condition: good (used), functionality: fully functional, Year of construction: 1994, Used 3 meter guillotine shear by Volz Eurocut (Romanian manufacture) Model: Eurocut 6.5 Capacity: 3100 x 6.5 mm Electric back gauge Hjdpfx Acjytb Rpjvok Adjustable cutting angle Year of manufacture: 1994

Condition: used, functionality: fully functional, Year of construction: 1980, Used 3 meter guillotine shear by Haco Model: Toolmaster 36 Capacity: 3100 x 6 mm Hjdpfx Aeytb Inscvok Adjustable backgauge Year of manufacture: 1980

Condition: excellent (used), functionality: fully functional, Year of construction: 2004, Sheet width: 4050 mm Sheet thickness: 10 mm Frame depth: 100 mm Table height: 900 mm Number of hold-downs: 21 units Cutting angle: 2° Total power requirement: 22 kW Machine weight approx.: 17,100 kg Accessories/Equipment: Electronic position control - ELGO P8724 Motorized backgauge operated by ball screw spindle - Adjustment range from 10-1000 mm. For positions above 1000 mm, the backgauge automatically folds up. Adjustment speed max. 240 mm/sec. Cutting gap adjustment - Automatic via push-button preselection based on sheet thickness Cutting line illumination and marking 1 Side stop - 1500 mm long, for right-angle cuts, with 2 T-slots, scale, and ball rollers 4 Support arms - 1500 mm long with T-slot, scale, and ball rollers 16 ball rollers integrated into the table Safety guards at the rear, left and right Light curtain safety between the guards 1 swiveling stop dog Special hand guard design - With 1 foldable recess of approx. 1000 mm for inserting and removing small cut-offs Roller conveyor high support - Pneumatically actuated to allow precise cutting of sheets without sag and to sort out scrap. Sheet return system - The roller conveyor high support is controlled to only tilt after the cut is made. Additionally equipped with a switching mode "without tilting" to return cut-offs to the machine table via the backgauge Hsdpfxeyyl Rno Acvsk - Spare blade

Condition: used, Year of construction: 2013, total length: 4,110 mm, total width: 2,400 mm, total height: 2,100 mm, Weight: 7.250 kg Price: On request - Year: 2013 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: 607913428 - Drive system: CNC - Drive type: Hydraulic - Max. sheet thickness [mm]: 6 - Max. working width [mm]: 3100 - Cutting speed [mm/min]: 15 - Throat depth [mm]: 150 - Backgauge depth [mm]: 1000 - Transport dimensions: 4110mm x 2400mm x 2100mm (l x w x h) - Transport weight [kg]: 7250kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum Hjdpfx Aeytgapscvek

Condition: good (used), Year of construction: 1963, cutting length 2500 mm plate thickness 3 mm Hsdpfjul Eixsx Acvjk distance between columns 2050 mm blade length 2650 mm total power requirement 3 kW weight of the machine ca. 2,5 t - The scissors are equipped with an adjustable stop on the back. stop. Each side is equipped with a millimetre counter, so that the guarantee that the cuts are true to size. - Spring-loaded automatic hold-downs prevent the material from shifting during the cutting process. material during the cutting process.

Condition: good (used), sheet width 2000 mm Hjdpfx Asul Ei Escvek plate thickness 2,25 mm distance between columns 2040 mm total power requirement 7,5 kW weight of the machine ca. 1,5 t dimensions of the machine ca. 2,2x1,7x1,1 m SN-No. 380/6

Condition: used, Year of construction: 1985, round bar steel 40 mm square edge steel 40 mm L-beam 120 x 12 mm Punch power 600 kN hole punching press: throat 400 mm hole punching press: max. length of stroke 32 mm hole punching press: capacity (dia. x thick.) 30 x15 mm hole punching press: capacity (dia. x thick.) 20 x 20 mm notching: l + T material 80 x 10 mm no. of strokes 40 / 46 Hub/min shear: flat material 150 x 15 mm shear: length of knifes 275 mm total power requirement 3 kW weight of the machine ca. 2,9 t Hodpfeydqn Ssx Acvsk dimensions of machine L x W x H 2,18 x 0,83 x 2,15 m Accessories: tool cabinet with various punches and dies, length stop

Condition: new, sheet width 2550 mm 4 mm sheet thickness for stainless steel 2 mm Hsdpfx Acsyyc Azsvok rear stop 750 mm total power requirement 7,5 kW weight of the machine ca. 3050 kg dimensions 3300 x 2230 x 1360 mm Standard equipment: - All-steel welded construction with static and dynamic frame rigidity frame rigidity - Direct drive with brake motor - Specially alloyed cutting blades - 750 mm motorized, digitally adjusted backgauge with ball screws recirculating ball screws - Manual blade gap adjustment system - Mechanical sheet clamping system with plastic base - Work table with insert plates - foot switch for single and repeat cutting cycles - 1 x squaring arm 1000 mm long with metric scale - 2 x 800 mm front material support arms - Front stop - Finger protection - front and rear covers - Rear light guards - CE declaration of conformity Youtube video link: ?v=pCuKwtBIQto&ab_channel=BaestleinGmbH

Condition: used, Year of construction: 1995, sheet width 6500 mm plate thickness 3 mm back stop - adjustable 1000 mm dimensions 7300x2400x2300 mm Weight 20000 kg Equipment/accessories: - 1 x set of knives Hsdpfx Acoyyc Auevok

Condition: used, Year of construction: 2002, total length: 3,700 mm, total width: 2,150 mm, total height: 1,900 mm, Weight: 6.000 kg Hedpfxeyr Scgj Acvek - Year: 2002 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: A10347 - Max. sheet thickness [mm]: 6 - Max. working width [mm]: 3000 - Throat depth [mm]: 200 - Backgauge depth [mm]: 1000 - Finger guard: Fixed - Transport dimensions: 3700mm x 2150mm x 1900mm (l x w x h) - Transport weight [kg]: 6000kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: excellent (used), Year of construction: 1994, Josting Veneer Pack Cutting Machine Type: EFS 2300 L - Year 1994 Cutting length: 2,300 mm Maximum insertion height: 80 mm FIESSLER safety light curtain Alignment light for cutting position display Hedpfxexgbwzs Acvok Parallel fence motorized adjustment, fine adjustment via handwheel Connected load: 7.7 kW Weight: 2,700 kg Dimensions: 3,610 x 1,700 x 1,680 mm Ex-works: - available immediately -

Condition: used, Year of construction: 2001, Guillotine Shear Manufacturer: BBM Model: TS-H25-16 Year of manufacture: 2001 Tool length: 2,550 mm Tool height: 80 mm Max. cutting thickness: 16 mm Max. cutting length: 2,530 mm Max. strokes: 15 1/min Voltage: 400 V Frequency: 50 Hz Control circuit: 230 V Current consumption: 58 A Hodpfsyw I A Ijx Acvjk Line fusing: 63 A Hydraulic connection data: 300 bar Pneumatic connection data: 6 bar Weight approx.: 11 t 25326

Condition: used, manufacture Tucker Type ERC80/ERF23FBGR/ERT In our opinion, the machine is in good used condition and can be viewed under power by appointment. Punch riveting system: - ERC80 - ERF23 - BGR - ERT Hsdpfjxwp Nysx Acvok There are approximately 150 pieces available. Accessories, tools and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Changes and errors in the technical data and information as well Subject to prior sale!

Year of construction: 2024, condition: new, Make: DURMA Type: MS 3004 Year of construction: 2024 Cutting length: 3100 mm Sheet thickness: 4 mm Control system: EZM9910 Operating hours: 0 Cutting angle: 1°30 Number of strokes per min.: 42 Motor power: 7.5 kW Hodpfx Acsd R Emfjvok Backgauge range: 750 mm Table width: 450 mm Table height: 800 mm Dimensions L/W/H: 3700x2300x1350 mm Weight: 3780 kg Standard equipment EZM9910 control unit Backgauge range 750 mm programmable via control unit Plastic inserts for hold-down device 1 side stop and 2 sheet support arms Finger guard Portable foot switch with emergency stop switch Spring flap stop in T-slot of the support arms Ball screw Ikh7877 Table plates with ball rollers Upper blade with 2 cutting edges Lower blade with 4 cutting edges CE marking Extended equipment Adjustable angle stop 0-180 The machine can be viewed and demonstrated at any time by appointment at our demonstration center in Staufenberg. Further machines are available for demonstration at our demonstration center in Staufenberg. We will be happy to send you further information on request.

Year of construction: 2024, condition: new, *image similar* Hsdpfx Acohk Ngcevsk Technical data sheet length: 2.050 mm sheet thickness : 3 mm Total power requirement : 3 kW Dimension (LxWxH) 2,4 x 1,35 x 1,2 mm

Year of construction: 2024, condition: new, Motorized guillotine shears Technical data Cutting capacity: 2,5mm Cutting length: 2550mm Cutting angle: 1°40' Stroke rate/min: 35 1/sec. Motor power: 3kW backgauge range: 550mm table width: 400mm table height: 850mm height: 1260mm Hsdpfshk Nf Rox Acvek width: 1350mm length: 3100mm Weight approx.: 1540kg

Year of construction: 2022, condition: new, Motorized guillotine shear MS 1303 Technical data: Sheet width: 1350 mm sheet thickness: 3,0 mm stand width - table width: 400 mm working height: 850 mm Hjdpfx Aohk Nfuscvok Control: conventional

Year of construction: 2024, condition: new, Make: DURMA Type: MS 2504 year of manufacture: 2022 cutting length: 2550 mm sheet thickness: 4 mm Control: EZM9910 Hjdpfod R Er Dsx Acvsk Operating hours: 0 Cutting angle: 1°30 Strokes per min.: 42 motor power: 7,5 kW backgauge range: 750 mm table width: 450 mm table height: 800 mm dimensions L/W/H: 3200x2300x1350 mm Weight: 3780 kg Standard equipment control unit EZM9910 backgauge range 750 mm programmable via control unit Jvcmke Plastic inserts for hold-down 1 side stop and 2 sheet support arms Finger guard Portable foot switch with emergency stop Spring loaded stop in T-slot of the support arms Ball screw Ikh7877 Table plates with ball rollers Upper knife with 2 cutting edges Lower knife with 4 cutting edges CE marking Extended equipment Adjustable angular fence 0-180 The machine can be inspected and demonstrated at any time by appointment in our demonstration center in Staufenberg. Further machines are ready for demonstration at our facility in Staufenberg. We will be happy to provide you with further information on request.

Condition: used, functionality: unexamined, Year of construction: 1986, machine/vehicle number: 1233, control type: manual, degree of automation: semi-automatic, actuation type: hydraulic, punching force: 20 t, type of input current: three-phase, Equipment: foot remote control, Used punching machine with a selection of diameters for round and square holes. Both the large and small punching machines, as well as the cabinet, are included. Each punching machine can be operated independently via foot pedal. Hedpfx Acsyu Hqqevek

Condition: good (used), Year of construction: 2012, operating hours: 21,200 h, functionality: fully functional, Model Heidelberg Varimatrix 105 CS, automatic die-cutting machine for die cutting, creasing, and embossing, year of manufacture 2012, format: min. 350 x 400 mm, max. 750 x 1050 mm, speed: max. 7,500 sheets/hour, operating hours: approx. 21,200, Incoterm: loaded on truck, assembly condition: in production, non-stop sheet feeder with pre-piling device, non-stop delivery with gripper edge removal, elevated by 30 cm including platform height extension, three-phase auto-transformer, hold-down device for thin or wavy material, fine adjustment system for die-cutting plate, small sheet device (min. sheet size 300 x 350 mm), mechanical double sheet control, side lays on both operator and drive side, stripping device at delivery, standard stripping frame, quick-lock chase with fixed make-ready plate, stripping station, touch-screen control, Centerline system, without compressor. Delivery date: 05-2026 Hsdpfsyw H Dqox Acvsk

Condition: excellent (used), Year of construction: 1996, Trumpf TC500-1300 including Sheetmaster, powered on Hsdpfxoyybc Ho Acvjk

Condition: ready for operation (used), Year of construction: 1977, Immediately available from site: Universal profile steel shear with punching unit Peddinghaus Model 210 / 16 Year of manufacture: 1977 Pressing force: 60 t Punching: 27 x 19 mm Round steel: 50 mm Square: 45 x 45 mm Flat steel: 150 x 19 mm Punching: 27 x 19 mm L profile 90 degrees: 130 x 13 mm L profile 45 degrees: 100 x 11 mm T profile 90 degrees: 130 x 15 mm T profile 45 degrees: 100 x 11 mm Drive: 5.5 kW Weight: 3 t Hedpfxoyykz Es Acvek Many punching tools included Price: €1,500 plus VAT, ex site

Condition: ready for operation (used), Year of construction: 1992, Hydraulic Profile Steel Shear Peddinghaus Hydraulic machine with 5 stations for punching, notching, shearing flat steel, angle steel, and solid material. Punch activation by hand lever, profile shear with foot pedal. Throat depth: 510 mm Press force: 60 tons Throat depth: 510 mm Shearing capacity: 500 x 12 or 400 x 16 mm Punching diameter: 27 mm in 17 mm plate Punching diameter: 39 mm in 12 mm plate Round steel: 45 mm Square steel: 40 mm Angle steel: 120 x 13 mm Hsdpoyykzxefx Acvok Flat steel: 500 x 12 mm Drive: 7.5 kW Oil capacity: 80 liters Weight: 3 t Price: EUR 3,000 plus VAT, ex works.

Condition: ready for operation (used), Year of construction: 1981, Immediately available ex-location: Hsdjyykzfopfx Acvok Hydraulic Guillotine Shear Köllschen Type BSH 2000/12.5 Year of manufacture: 1981 Cutting length: 2050 mm Material thickness: up to 12.5 mm Electric backgauge: from 5 to 1000 mm Drive power: 15 kW Weight: 11 t At a price of EUR 3,750 plus VAT ex location

Condition: ready for operation (used), Year of construction: 1980, Immediately available ex location: Lotze Guillotine Shear Type K 20 TS 2000 x 3 Year of manufacture: 1980 Cutting length: 2000 mm Material thickness: 3 mm Drive: 5 kW Back gauge: 750 mm Weight: 3,200 kg Hodsyyky Ujpfx Acvek Price: EUR 1,500 plus VAT, ex works